all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
USERS MANUAL | Users Manual | 3.71 MiB | ||||
1 | Block Diagram | |||||||
1 | External Photos | |||||||
1 | Internal Photos | |||||||
1 | Internal Photos | |||||||
1 | ID Label/Location Info | |||||||
1 | Test Report | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos |
1 | USERS MANUAL | Users Manual | 3.71 MiB |
Test Report No.: GETEC-E3-07-066 FCC Class B Certification APPENDIX H
: USERS MANUAL EUT Type: LCD TV/Monitor FCC ID: BEJ47LB9DFUA LCD TV OWNERS MANUAL LCD TV MODELS 42LBX 47LBX 52LBX Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service. www.lgusa.com / www.lg.ca ENERGY STAR is a set of power-saving guidelines issued by the U.S. Environmental Protection Agency(EPA). As an ENERGY STAR Partner LGE U. S. A.,Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency. WARNING / CAUTION WARNING / CAUTION To prevent fire or shock hazards, do not expose this product to rain or moisture. FCC NOTICE Class B digital device This equipment has been tested and found to com-
ply with the limits for a Class B digital device, pur-
suant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio fre-
quency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or televi-
sion reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is con-
nected.
- Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. CAUTION Do not attempt to modify this product in any way without written authorization from LG Electronics. Unauthorized modification could void the users authority to operate this product 1 TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of elec-
tric shock to persons. The exclamation point within an equi-
lateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instruc-
tions in the literature accompanying the appliance. WARNING/CAUTION TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. NOTE TO CABLE/TV INSTALLER This reminder is provided to call the CATV system installers attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical. SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Important safety instructions shall be provided with each apparatus. This information shall be given in a separate booklet or sheet, or be located before any operating instructions in an instruction for installation for use and supplied with the apparatus. This information shall be given in a language acceptable to the country where the apparatus is intended to be used. The important safety instructions shall be entitled Important Safety Instructions. The following safety instructions shall be included where applicable, and, when used, shall be verbatim as follows. Additional safety information may be included by adding statements after the end of the following safety instruction list. At the manufacturers option, a picture or drawing that illustrates the intent of a specific safety instruction may be placed immediately adjacent to that safety instruction:
Owner Manual Owner Manual Owner Manual Owner Manual Owner Manual Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. 1 2 Do not use this apparatus near water. Clean only with dry cloth. Owner Manual 3 Do not block any ventilation openings. Install in accordance with the manufacturers instructions. 5 6 Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong, The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Owner Manual Owner Manual Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Owner Manual Owner Manual Owner Manual 7 Only use attachments/accessories specified by the manufacturer. 4 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers)that produce heat. Owner Manual Owner Manual 8 Unplug this apparatus when unused for long periods of time. 2 9 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Never touch this apparatus or antenna during a thunder or lighting storm. 14 10 11 12 13 Do not allow a impact shock or any objects to fall into the product, and do not drop onto the screen with something. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has exposed to rain or moisture, does not operate normally, or has been dropped. CAUTION concerning the Power Cord :
Most appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates dam-
age or deterioration, unplug it, discontinue use Owner Manual of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. Owner Manual Owner Manual Owner Manual Outdoor use marking :
WARNING - To reduce the risk of fire or elec-
tric shock, do not expose this appliance to rain or moisture. 15 Wet Location Marking : Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on or over apparatus. 16 GGRROOUUNNDDIINNGG Ensure that you connect the earth ground wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes. Power Supply Short-circuit Breaker 17 DDIISSCCOONNNNEECCTTIINNGG DDEEVVIICCEE FFRROOMM MMAAIINNSS Mains plug is the disconnecting device. The plug must remain readily operable. 3 CONTENTS WARNING / CAUTION . 1 SAFETY INSTRUCTIONS . 2 FEATURE OF THIS TV . 6 PREPARATION Accessories . 7 Front Panel Information . 8 Back Panel Information . 9 Attaching the TV to a Wall . 10 Back Cover for Wire Arrangement . 11 Desktop Pedestal Installation . 12 VESA Wall Mounting . 12 Antenna or Cable Connection . 13 EXTERNAL EQUIPMENT SETUP HD Receiver Setup . 14 DVD Setup . 17 VCR Setup . 19 PC Setup . 21 Other A/V Source Setup . 26 USB In Setup . 26 Audio Out Setup . 27 WATCHING TV / CHANNEL CONTROL Remote Control Key Functions . 28 Turning On TV . 30 Channel Selection . 30 Volume Adjustment . 30 On-Screen Menus Selection . 31 Channel Setup
- Auto Scan (Auto Tuning) . 32
- Add / Delete Channel (Manual Tuning) . 33
- Channel Editing . 34 Input List . 35 SimpLink . 36 Input Label . 38 4 MEDIAHOST MEDIA MEDIAHOST MEDIA HOST HOST Entry Modes . 39 Photo List . 40 Music List . 44 PICTURE CONTROL Picture Size (Aspect Ratio) Control . 46 Preset Picture Settings
- Picture Mode - Preset . 47
- Color Tone - Preset . 48 Manual Picture Adjustment
- Picture Mode - User Mode . 49
- Color Tone - User Mode . 50 XD - Picture Improvement Technology . 51 Advanced - Cinema 3:2 Pulldown Mode . 52 Advanced - Black (Darkness) Level . 53 Advanced - TruM . 54 TruM Demo . 55 Picture Reset . 56 SOUND & LANGUAGE CONTROL Auto Volume Leveller (Auto Volume) . 57 Preset Sound Setting (Sound Mode) . 58 Sound Setting Adjustment - User Mode . 59 Balance . 60 Stereo/SAP Broadcasts Setup . 61 TV Speakers On/Off Setup . 62 Audio Language . 63 On-Screen Menus Language Selection . 64 Caption Mode . 65
- Analog Broadcasting System Captions . 66
- Digital Broadcasting System Captions . 67
- Caption Option . 68 TIME SETTING Clock Setting
- Auto Clock Setup . 69
- Manual Clock Setup . 70 Auto On/Off Timer Setting . 71 Sleep Timer Setting . 72 Auto Shut-off Setting . 73 PARENTAL CONTROL / RATINGS Set Password & Lock System . 74 Channel Blocking . 76 Movie & TV Rating . 77 External Input Blocking . 80 Key Lock . 80 APPENDIX Troubleshooting . 81 Maintenance . 83 Product Specifications . 84 Programming the Remote Control . 85 IR Codes . 89 External Control Through RS-232C . 91 5 FEATURES OF THIS TV R R TruSurround XT is a trademark of SRS Labs, Inc. TruSurround XT TruSurround XT technology is incorporated under license from SRS Labs, Inc. LG TV with this logo displays Full HD(high-defini-
tion) 1080p native resolution by receiving and pro-
cessing a Full HD 1080p signal. LG TV with this logo can play MP3 music from a MP3 player, such as iPOD, and JPEG images from a digital camera through the USB device. With HDMI CEC support of LGs audio/video device connected to the HDMI (high-definition multimedia interface), LG TV with this logo works easily with one remote control. It has three HDMI ports that connect audio and video devices with one cable and produces the high-
est quality digital images and sound.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. High-definition television. High-resolution digital television broadcast and playback system composed of roughly a million or more pixels, 16:9 aspect-ratio screens, and AC3 digital audio. A subset of digital television, HDTV formats include 1080i and 720p resolutions. LG's own special digital image generator, consisting of a full digital image processor, six different main picture quality factors.
I If the TV feels cold to the touch, there may be a small flicker when it is turned on. This is normal, there is noth-
ing wrong with TV. I Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the monitor's performance. I Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may pro-
duce some temporary distortion effects on the screen. OOnn DDiissppoossaall a. The fluorescent lamp used in this product contains a small amount of mercury. b. Do not dispose of this product with general household waste. c. Disposal of this product must be carried out in accordance to the regulations of your local authority. P R E P A R A T O N I 6 PREPARATION ACCESSORIES Ensure that the following accessories are included with your plasma display. If an accessory is missing, please contact the dealer where you purchased the product. User must use shielded signal interface cables (D-sub 15 pin cable) with ferrite cores to maintain standard compliance for the product. Owner's Manual LCD TV PLASMA TV Owner's Manual http://www.lgusa.com www.lg.ca Copyright 2007 LGE, All Rights Reserved. TV INPUT TV INPUT STBSTB B R I G H T
MENU BRIGHT +
TIMER RATIO S I M P L I N K BACK BACK APM CC AUTO DEMO M/C EJECT 1.5V 1.5V Owners Manual CD Manual Remote Control Batteries Power Cord Polishing Cloth I Slightly wipe stained spot on the exterior only with the polishing cloth for the product exterior if there is stain or fingerprint on surface of the exterior. I Do not wipe roughly when removing stain. Please be cautions of that excessive power may cause scratch or discoloration. OOppttiioonn EExxttrraass 75ohm Round Cable 2- TV Bracket Bolts 2- TV Brackets, 2- Wall Brackets D-sub 15 pin Cable Cable Management Twist Holder Arrange the wires with the twist holder. P R E P A R A T O N I 7 PREPARATION FRONT PANEL INFORMATION I Here shown may be somewhat different from your TV. I NOTE: If your product has a protection tape attached, remove the tape. And then wipe the product with a cloth (If a polishing cloth is included with your product, use it). CH CHANNEL
(DD,EE) Buttons VOL CH VOLUME
(FF,GG) Buttons VOL ENTER Button MENU Button INPUT Button POWER Button C H V O L E N T E R M E N U I N P U T
I Remote Control Sensor Intelligent Eye Adjusts picture according to the surrounding conditions. Power/Standby Indicator Illuminates red in standby mode. Illuminates green when the set is switched on. P R E P A R A T O N I 8 BACK PANEL INFORMATION I Here shown may be somewhat different from your TV. N I N I B S U S-VIDEO R I O D U A A O N O M L
O E D V I AV IN 2 B S U USB Input port S-VIDEO 6 R I O D U A O N O M
L O E D V I AV IN 2 1 10
/DVI 3 RGB 4 ANTENNA/
ANTENNA/
CABLE IN ABLE IN 5 9 8 7 6 2 1 2 3 4 5 HDMI/DVI IN Connect a HDMI signal to 1, 2 or 3. Or DVI (VIDEO)signal to the 1, 2 or 3 port with a DVI to HDMI cable. COMPONENT IN Connect a component video/audio device to these jacks. RGB(PC) AUDIO (RGB/DVI) Connect the monitor output from a PC to the appropriate input port. RS-232C IN (CONTROL & SERVICE) PORT Connect to the RS-232C port on a PC. REMOTE CONTROL PORT Connect your wired remote control. 6 7 8 9 AV (Audio/Video) IN 1 Connect audio/video output from an external device to these jacks. S-VIDEO Connect S-Video out from an S-VIDEO device. AUDIO OUT Connect analog audio to various types of equipment. DIGITAL AUDIO OUT Connect digital audio to various types of equipment. Note: In standby mode, these ports do not work. ANTENNA/CABLE IN Connect over-the air signals to this jack. Connect cable signals to this jack. 10 Power Cord Socket For operation with AC power. Caution: Never attempt to operate the TV on DC power. P R E P A R A T O N I 9 PREPARATION ATTACHING THE TV TO A WALL I Here shown may be somewhat different from your TV. We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards. Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction, potentially causing injury or damaging the product. Caution: Please make sure that children dont climb on or hang from the TV. I Insert the eye-bolts (or TV brackets and bolts) to tighten the product to the wall as shown in the picture.
*Insert the eye-bolts and tighten them securely in the upper holes. Secure the wall brackets with the bolts (not provided as parts of the product, must purchase separately ) to the wall. Match the height of the bracket that is mounted on the wall to the holes in the product. Ensure the eye-bolts or brackets are tightened securely. I Use a sturdy rope (not provided as parts of the product, must purchase separately) to tie the product. It is safer to tie the rope so it becomes horizontal between the wall and the product. P R E P A R A T O N I 10 BACK COVER FOR WIRE ARRANGEMENT I Here shown may be somewhat different from your TV. Connect the cables as necessary. 1 To connect an additional equipment, see the EExxtteerrnnaall eeqquuiippmmeenntt CCoonnnneeccttiioonnss section. 2 Install the CCAABBLLEE MMAANNAAGGEEMMEENNTT as shown.
(Insert it as pushing the loops on the both sides of the cable management.) 3 Bundle the cables using the supplied twist holder. CABLE MANAGEMENT How to remove the cable management Hold the CCAABBLLEE MMAANNAAGGEEMMEENNTT with both hands and pull it out.
(Pull it out as holding the loops on the both sides of the cable management.) NOTE GG Do not hold the CABLE MANAGEMENT when moving the product.
- If the product is dropped, you may be injured or the product may be broken. P R E P A R A T O N I 11 PREPARATION DESKTOP PEDESTAL INSTALLATION For proper ventilation, allow a clearance of 4inches on all four sides from the wall. 4 inches 4 inches 4 inches 4 inches VESA WALL MOUNTING This product accepts a VESA-compliant mounting interface pad. (optional) There 4 threaded holes are available for attaching the bracket. 600mm 400mm NOTE GG Screw length needed depends on the wall mount used. For further information, refer to the VESA Wall Mounting Instruction Guide. P R E P A R A T O N I 12 ANTENNA OR CABLE CONNECTION 1. Antenna (analog or digital) Wall Antenna Socket or Outdoor Antenna without a Cable Box Connections. For optimum picture quality, adjust antenna direc-
tion if needed. Wall Antenna Socket Outdoor Antenna
(VHF, UHF) 2. Cable Cable TV Wall Jack Multi-family Dwellings/Apartments
(Connect to wall antenna socket) ANTENNA/
CABLE IN RF Coaxial Wire (75 ohm) Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna) RF Coaxial Wire (75 ohm) Copper Wire Be careful not to bend the bronze wire when connecting the antenna. ANTENNA/
CABLE IN 3. Using both cable and antenna Antenna Cable TV Wall Jack RF Coaxial Wire (75 ohm) RF Coaxial Wire (75 ohm) Antenna UHF VHF Signal Amplifier Diplexer
(Signal Combinner) ANTENNA/
CABLE IN ANTENNA/
CABLE IN I To improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly. I If the antenna needs to be split for two TVs, install a 2-Way Signal Splitter. I If the antenna is not installed properly, contact your dealer for assistance. NOTE The TV will let you know when the analog, cable, and digital channel scans are complete. P R E P A R A T O N I 13 EXTERNAL EQUIPMENT SETUP HD RECEIVER SETUP This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive digital signals from a digital set-top box or other digital external device, refer to the figure as shown below. This TV supports HDCP (High-bandwidth Digital Contents Protection) protocol for Digital Contents. Y PB PR L R 1 2 When connecting Component cable 1. How to connect 1 Connect the video outputs (Y, PB, PR) of the digital set top box to the CCOOMMPPOONNEENNTT IINN VVIIDDEEOO 11 jacks on the set. Match the jack colors
(Y = green, PB = blue, and PR = red). 2 Connect the audio output of the digital set-top box to the CCOOMMPPOONNEENNTT IINN AAUUDDIIOO 11 jacks on the set. 2. How to use
(DVI) I Turn on the digital set-top box.
(Refer to the owners manual for the digital set-top box.) I Select CCoommppoonneenntt 11 input source with using the IINNPPUUTT button on the remote control. I If connected to CCOOMMPPOONNEENNTT IINN 22 input, select CCoommppoonneenntt 22 input source. Signal Component 1/2 HDMI/DVI1, 2 or 3 480i 480p 720p 1080i 1080p Yes Yes Yes Yes Yes No Yes Yes Yes Yes Supported Display Specifications (Y, CB /PB, CR /PR) Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) 720x480 15.73 60.00 15.73 59.94 31.47 59.94 31.47 60.00 1280x720 60.00 45.00 44.96 59.94 1920x1080 33.75 33.72 67.50 67.432 27.00 26.97 33.75 33.71 60.00 59.94 60.00 59.939 24.00 23.94 30.00 29.97 E X T E R N A L E Q U I P M E N T S E T U P 14 When connecting HDMI cable 1. How to connect Connect the digital set-top box to HHDDMMII//DDVVII IINN11, 22 or 33 jack on the set. No separated audio connection is necessary. 1 2 2. How to use I Turn on the digital set-top box.
(Refer to the owners manual for the digital set-top box.) I Select HHDDMMII11, HHDDMMII22 or HHDDMMII33 input source with using the IINNPPUUTT button on the remote control. I If the digital set-top box player does not support Auto HDMI, you need to set the output resolution appropriately. Supported Display Specifications (HDMI-DTV) Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) 720x480 1280x720 1920x1080 31.47 31.47 45.00 44.96 33.75 33.72 67.50 67.432 27.00 26.97 33.75 33.71 60.00 59.94 60.00 59.94 60.00 59.94 60.00 59.939 24.00 23.94 30.00 29.97
(DVI)VI) 1 HDMI-DTV OUTPUT E X T E R N A L E Q U I P M E N T S E T U P RGB 15 EXTERNAL EQUIPMENT SETUP When connecting HDMI to DVI cable RGBRGB 3 1 2 DVI-DTV OUTPUT L R 1. How to connect 1 2 Connect the DVI output of the digital set-top box to the HHDDMMII//DDVVII IINN11, 22 or 33 jack on the set. Connect the audio output of the digital set-top box to the AAUUDDIIOO((RRGGBB//DDVVII)) jack on the set. 2. How to use I Turn on the digital set-top box. (Refer to the owners manual for the digital set-top box.) I Select HHDDMMII11, HHDDMMII22 or HHDDMMII33 input source with using the IINNPPUUTT button on the remote control. E X T E R N A L E Q U I P M E N T S E T U P 16 DVD SETUP When connecting Component cable 1. How to connect 1 Connect the video outputs (Y, PB, PR) of the DVD to the CCOOMMPPOONNEENNTT IINN VVIIDDEEOO11 jacks on the set. Match the jack colors
(Y = green, PB = blue, and PR = red). Y PB PR L R 2 Connect the audio outputs of the DVD to the CCOOMMPPOONNEENNTT IINN AAUUDDIIOO11 jacks on the set. 1 2 2. How to use I Turn on the DVD player, insert a DVD. I Select CCoommppoonneenntt 11 input source with using the IINNPPUUTT button on the remote control. I If connected to CCOOMMPPOONNEENNTT IINN 22 input, select CCoommppoonneenntt 22 input source. I Refer to the DVD player's manual for operating instruc-
tions. Component Input ports To get better picture quality, connect a DVD player to the component input ports as shown below. Component ports on the TV Video output ports on DVD player Y Y Y Y Y PB PB Pb B-Y Cb PR PR Pr R-Y Cr E X T E R N A L E Q U I P M E N T S E T U P 17 EXTERNAL EQUIPMENT SETUP EXTERNAL EQUIPMENT SETUP When connecting with an S-Video cable 1. How to connect 1 2 Connect the S-VIDEO output of the DVD to the SS--VVIIDDEEOO input on the set. S-VIDEO AUDIO L R Connect the audio outputs of the DVD to the AAUUDDIIOO input jacks on the set. 1 2 2. How to use I Turn on the DVD player, insert a DVD. I Select AA VV 11 input source with using the IINNPPUUTT button on the remote control. I If connected to AAVV IINN 22, select AA VV 22 input source. I Refer to the DVD player's manual for operating instructions. When connecting HDMI cable 1. How to connect Connect the HDMI output of the DVD to the HHDDMMII//DDVVII IINN11, 22 or 33 jack on the set. No separated audio connection is necessary. 1 2 2. How to use I Select HHDDMMII11, HHDDMMII22 or HHDDMMII33 input source with using the IINNPPUUTT button on the remote control. 1 I Refer to the DVD player's manual for operating instruc-
tions. I If the DVD does not support Auto HDMI, you need to set the output resolution appropriately. HDMI-DVD OUTPUT E X T E R N A L E Q U I P M E N T S E T U P 18 VCR SETUP I To avoid picture noise (interference), leave an adequate distance between the VCR and TV I If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen. When connecting with an antenna ANTENNA/
ANTENNA/
CABLE IN CABLE IN 1 ANT OUT S-VIDEO VIDEO L R ANT IN OUTPUT SWITCH Wall Jack 2 Antenna 1. How to connect 1 2 Connect the RF antenna out socket of the VCR to the AAnntteennnnaa socket on the set. Connect the antenna cable to the RF antenna in socket of the VCR. 2. How to use I Set VCR output switch to 3 or 4 and then tune TV to the same channel number. I Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owners manual.) E X T E R N A L E Q U I P M E N T S E T U P 19 EXTERNAL EQUIPMENT SETUP When connecting with a RCA cable 1. How to connect 1 Connect the AAUUDDIIOO/VVIIDDEEOO jacks between TV and VCR. Match the jack colors(Video = yellow, Audio Left =
white,and Audio Right = red) 2. How to use I Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owners manual.) I Select AA VV 11 input source with using the IINNPPUUTT button on the remote control. I If connected to AAVV IINN 22, select AA VV 22 input source. VIDEO ANTENNA/
L R CABLE IN S-VIDEO ANT IN OUTPUT SWITCH ANT OUT 1 NOTE If you have a mono VCR, con-
nect the audio cable from the VCR to the AAUUDDIIOO LL//MMOONNOO jack of the set. When connecting with an S-Video cable 1. How to connect S-VIDEO VIDEO L R ANT IN 1 2 Connect the S-VIDEO output of the VCR to the SS --
VV II DD EE OO input on the set. The picture quality is improved; compared to normal composite (RCA cable) input. Connect the audio outputs of the VCR to the AAUUDDIIOO input jacks on the set. 2. How to use I Insert a video tape into the VCR and press PLAY on the VCR.
(Refer to the VCR owners manual.) I Select AAVV11 input source with using the IINNPPUUTT button on the remote control. I If connected to AAVV IINN 22, select AAVV22 input source. OUTPUT SWITCH ANT OUT 1 2 CAUTION In the event that you connect both Video and the S-Video cables, only the S-Video will work. E X T E R N A L E Q U I P M E N T S E T U P 20 PC SETUP This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. When connecting D-sub 15 pin cable 1. How to connect 1 2 Connect the RGB output of the PC to the RRGGBB
((PPCC)) jack on the set. RGBRGB Connect the PC audio output to the AAUUDDIIOO
((RRGGBB//DDVVII)) jack on the set. 2. How to use I Turn on the PC and the set. I Select RRGGBB--PPCC input source with using the IINNPPUUTT button on the remote control. 1 2 NOTE GG Check the image on your TV. There may be noise associated with the resolution, vertical pattern, contrast or brightness in PC mode. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the VIDEO menu until the picture is clear. If the refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult the manufacturer of the PC graphic card. RGB OUTPUT AUDIO E X T E R N A L E Q U I P M E N T S E T U P 21 EXTERNAL EQUIPMENT SETUP When connecting HDMI to DVI cable RGBRGB E X T E R N A L E Q U I P M E N T S E T U P 22 1 2 1. How to connect DVI-PC OUTPUT AUDIO 1 2 Connect the DVI output of the PC to the HHDDMMII//DDVVII IINN11, 22 or 33 jack on the set.
(Use the HDMI to DVI cable) Connect the PC audio output to the AAUUDDIIOO((RRGGBB//DDVVII)) jack on the set. 2. How to use I Turn on the PC and the set I Select HHDDMMII11, HHDDMMII22 or HHDDMMII33 input source with using the IINNPPUUTT button on the remote control. NOTE GG If the PC has a DVI output and no HDMI output, a separated audio connection is necessary. GG If the PC does not support Auto DVI, you need to set the output resolution appropriately. To get the best picture quality, adjust the output resolution of PC graphics card's output resolution to 1920x1080, 60Hz. NOTES GG Depending on the graphics card, DOS mode may not work if a HDMI to DVI Cable is in use. GG Check the image on your TV. There may be noise associated with the resolution, vertical pattern, contrast or brightness in PC mode. If noise is present, change the PC output to another resolu-
tion, change the refresh rate to another rate or adjust the brightness and contrast on the PIC-
TURE menu until the picture is clear. If the refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult the manu-
facturer of the PC graphic card. GG Avoid keeping a fixed image on the screen for a long period of time. The fixed image may become permanently imprinted on the screen. GG The synchronization input form for Horizontal and Vertical frequencies is separate. Supported Display Specifications (RGB/HDMI-PC) Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) 640x350 31.468 31.469 31.469 37.861 37.500 35.156 37.879 48.077 46.875 48.363 56.476 60.023 720x400 640x480 800x600 1024x768 1280x768 1280x768 70.09 70.08 59.94 72.80 75.00 56.25 60.31 72.18 75.00 60.00 70.06 75.02 47.776 59.870 60.289 74.893 1360x768 47.712 60.015 1280x1024 63.981 60.020 79.976 75.025 1600x1200 75.00 60.00 1920x1080 67.50 60.00
* RGB-PC mode only: 1280x768(H-60.289, V-74.893) E X T E R N A L E Q U I P M E N T S E T U P 23 EXTERNAL EQUIPMENT SETUP Screen Setup for PC mode Overview When the RGB input, of the set is connected to a PC Output, Select RGB-PC with using the IINNPPUUTT button on the remote control. When you change the resolution, select the proper resolution in present input to see the best picture appearance. 1 2 3 Press the MMEENNUU button and then use DD or EE button to select the PPIICCTTUURREE menu. Press the GG button and then use DD or EE button to select SSccrreeeenn. Press the GG button to enter the screen adjustment menu. Picture Mode : User1 Color Temperature : Cool XD Advanced Aspect Ratio : 16:9 Picture Reset Screen TruM Demo Picture Mode Color Temperature XD Advanced Aspect Ratio Picture Reset Screen TruM Demo G Selection ( G or ) leads you to the screen adjustment menu. E X T E R N A L E Q U I P M E N T S E T U P 24 Adjustment for screen Resolution, Position, Size, Phase, Reset Use DD or EE button to select RReessoolluuttiioonn, PPoossiittiioonn, SSiizzee, or PPhhaassee. Press the EENNTTEERR button and then use DD / EE or FF / GG button to make appropriate adjustments. I The PPhhaassee adjustment range is --1166 ~ ++1166. I The SSiizzee adjustment range is --3300 ~ ++3300. Resolution Position GG Size Phase Reset Move Prev Press the EENNTTEERR button. 1 2 3 Initializing (Reset to original factory values) To initialize the adjusted values. 1 2 3 Use DD or EE button to select RReesseett. Press the EENNTTEERR button and then use FF or GG button to select YYeess. Press the EENNTTEERR button. RReessoolluuttiioonn XGA (1024, 1280, 1360) isnt distinguished because of having the same H/V Sync Time. This function is you to select the Default Sync Time. PPoossiittiioonn This function is to adjust picture to left/right and up/down as you prefer. SSiizzee PPhhaassee This function is to minimize any vertical bars or stripes visible on the screen background. And the horizontal screen size will also change. This function allows you to remove any horizontal noise and clear or sharpen the image of char-
acters. Resolution Position Size Phase Reset GG Initialize Settings. Yes No Prev Select OK E X T E R N A L E Q U I P M E N T S E T U P 25 EXTERNAL EQUIPMENT SETUP OTHER A/V SOURCE SETUP 1. How to connect 1 Connect the AAUUDDIIOO/VVIIDDEEOO jacks between TV and external equipment. Match the jack colors.
(Video = yellow, Audio Left = white, and Audio Right = red) 2. How to use I Select AAVV22 input source with using the IINNPPUUTT button on the remote control. I If connected to AAVV IINN 11 input, select AAVV11 input source. I Operate the corresponding external equipment. N I B S U S-VIDEO R I O D U A A O N O M L
O E D V I AV IN 2 1 VIDEO L R Camcorder Video Game Set USB IN SETUP The TV has a special signal output capability which allows you to hook up the second TV or monitor. 1. How to connect 1 Connect the USB device to the UUSSBB IINN jacks on the side of TV. 2. How to use N I B S U R I After connecting the UUSSBB IINN jacks, you use the MEDIAHOST MEDIA HOST MEDIAHOST MEDIA HOST function. (GG pp..3399) O N O M L O D U A I
O E D V I AV IN 2 or 1 N N I I B B S S U U S-VIDEO R I I O O D D U U A A O O N N O O M M L L
O O E E D D V V I I AV IN 2 V IN 2 E X T E R N A L E Q U I P M E N T S E T U P 26 AUDIO OUT SETUP Send the TVs audio to external audio equipment via the Audio Output port. 1. How to connect Analog 1 2 Digital 1 2 3 Connect audio outputs to the TVs AAUUDDIIOO OOUUTT jacks. Set the TV Speaker option - Off in the AUDIO menu.
(GG pp..6622). See the external audio equipment instruction manual for operation. Connect one end of the optical or coaxial cable to the TVs OOPPTTIICCAALL or CCOOAAXXIIAALL port of DDIIGGIITTAALL AAUUDDIIOO OOUUTT. Connect the other end of the optical or coaxial cable to the digital audio input on the audio equipment. Set the TV Speaker option - Off in the AUDIO menu.
(GG pp..6622). See the external audio equipment instruction manual for operation. NOTE GG When connecting with external audio equipment, such as amplifers or speakers, please turn the TV speakers off.
(GG pp..6622) CAUTION GG Do not look into the optical output port. Looking at the laser beam may damage your vision. GG Block the SPDIF out(optical/coaxial) about the contents with ACP(Audio Copy Protection) function. L R S-VIDEO 1 1 2 E X T E R N A L E Q U I P M E N T S E T U P 27 WATCHING TV /CHANNEL CONTROL REMOTE CONTROL FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. MEDIAHOST MEDIA MEDIAHOST MEDIA HOST HOST mode control buttons VCR/DVD buttons I Controls the MEDIAHOST MEDIA HOST MEDIA MEDIAHOST HOST mode. I Control video cassette recorders or DVD players. TV INPUT TV INPUT MENU Displays the main menu. I Adjust brightness on screen. BRIGHT +/-
I It turns to the default settings brightness by changing B R I G H T
MENU BRIGHT +
mode source. STBSTB MEDIA HOST MEDIA HOST THUMBSTICK
(Up/Down/Left Right/ENTER) I Navigate the on-screen menus and adjust the system settings to your preference. EXIT Clear all on-screen displays and return to TV viewing from any menu. TIMER Select the amount of time before your TV turns off auto-
matically.GG pp..7722 RATIO Change the aspect ratio.GG pp..4466 SIMPLINK See a list of AV devices connected to TV. When you toggle this button, the SimpLink menu appears at the screen. VOLUME UP
/DOWN Increase/decrease the sound level. MUTE Switch the sound on or off. pp..3300 FAV Scroll through the programmed Favorite channels. pp..3344 CHANNEL UP/DOWN NUMBER button Select available channels. BACK Tune to the last channel viewed.
(DASH) Used to enter a program number for multiple program channels such as 2-1, 2-2, etc. TIMER RATIO S I M P L I N K BACK BACK APM CC AUTO DEMO M/C EJECT W A T C H I N G T V
C H A N N E L C O N T R O L 28 STB MEDIA HOST POWER Turns your TV or any other programmed equipment on or off, depending on the mode. TV INPUT In AV 1-2, Component 1-2, RGB-PC, HDMI1, HDMI2 and HDMI3 input sources, screen returns to the last TV channel. INPUT External input modes rotate in regular sequence: Antenna, Cable, AV1-2, Component 1-2, RGB-PC, HDMI1, HDMI2, HDMI3 (Antenna, Cable, AV 1-2, Component 1-2, RGB-PC, HDMI1, HDMI2, HDMI3 input sources are linked automatically, only if these are connected ). MODE Select the remote operating mode: TV, DVD, VCR, AUDIO, CABLE or STB.
* If the mode of another product is selected, a button on the remote control which is not used for the selected product can control the TV. MEDIAHOST MEDIA MEDIAHOST MEDIA HOST HOST Enter to the MEDIAHOST MEDIA HOST MEDIA MEDIAHOST HOST Inside the Sliding Cover mode. BACK BACK PICTURE PICTURE SOUND SOUND SAPSAP CCCC MARKMARK USB EJECT USB EJECT Installing Batteries PICTURE Adjust the factory preset picture depend on the viewing environment.GG pp.. 4477 SOUND Select the appropriate type of sound for type of program.GG pp.. 5588 SAP Select MTS sound: Mono, Stereo, and SAP analog mode. Change the audio language DTV mode. GG pp.. 6611 CC Select the Caption On/Off. GG pp..6655 MARK Enter the selected functions. GG pp..4411 USB EJECT Remove the USB device. GG pp..3399 Remote control effective range I Open the battery compartment cover on the back side and install the batteries matching cor-
rect polarity (+with +,-with -). I Install two 1.5V AA batteries. Dont mix old or used batteries with new ones. I Close cover. R LIVE TV INPUT MODE D A Y
DAY +
I Use a remote control up to 7 meters distance and 30 degree (left/right) within the receiving unit scope. I Dispose of used batteries in a recycle bin to pre-
serve environment. W A T C H I N G T V
C H A N N E L C O N T R O L 29 WATCHING TV /CHANNEL CONTROL TURNING ON TV 1 2 First, connect power cord correctly. At this moment, the TV switches to standby mode. I In standby mode, press the
(or ON/OFF), IINNPPUUTT, CCHH ((DD or EE)) button on the TV or press the PPOOWWEERR, IINNPPUUTT, TTVV IINNPPUUTT, CCHH((DD or EE)), NNuummbbeerr ((00~99)) button on the remote control. Select the viewing source by using the IINNPPUUTT button on the remote control. I This TV is programmed to remember which mode it was last set to, even if you turn the TV off. 3 When finished using the TV, press the PPOOWWEERR button on the remote con-
trol. The TV reverts to standby mode. NOTE GG If you intend to be away on vacation, disconnect the power plug from the wall power outlet. W A T C H I N G T V
C H A N N E L C O N T R O L TV INPUT STB MEDIA HOST TV INPUT TV INPUT INPUT STB TIMER RATIO MEDIA HOST S I M P BACK BACK PICTURE PICTURE PICTURE SOUND SOUND SAPSAP CCCC MARKMARK USB EJECT USB EJECT TV INPUT STB MEDIA HOST BACK PICTURE SOUND SAP CC MARK USB EJECT CHANNEL SELECTION TV INPUT 1 Press the CCHH ((DD or EE)) or NNUUMMBBEERR buttons to select a channel number. MEDIA HOST STB VOLUME ADJUSTMENT Adjust the volume to suit your personal preference. TV INPUT STB MEDIA HOST BACK BACK PICTURE PICTURE PICTURE SOUND SOUND SAPSAP CCCC MARK USB EJECT TIMER RATIO S I M P L I N K 1 2 3 30 Press the VVOOLL ((DD or EE)) button to adjust the volume. If you want to switch the sound off, press the MMUUTTEE button. You can cancel the Mute function by pressing the MMUUTTEE or VVOOLL ((DD or EE)) button. BACK PICTURE SOUND SAP CC MARK USB EJECT BACK BACK PICTURE SAP CC MARK USB EJECT ON-SCREEN MENUS SELECTION Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. 1 2 Press the MMEENNUU button and then use DD or EE button to select each menu. Press the GG button and then use DD EE FF GG button to display the available menus. SETUP PICTURE Auto Tuning Manual Tuning Channel Edit LOCK For USA For Canada AUDIO Lock System : Off Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Input Block Set Password Block Channel TV Rating-English TV Rating-French Input Block Picture Mode : User1 Color Temperature : Cool XD Advanced Aspect Ratio : 16:9 Picture Reset Screen TruM Demo Sound Mode : Standard Auto Volume
: On Balance : 0 TV Speaker : On OPTION TIME Language : English Clock : Oct 19, 2006, 03:44 AM Input Label SimpLink Key Lock Caption Set ID
: Off
: Off
: Off
: 1 Off Time On Time Sleep Time Auto Sleep
: Off
: Off
: Off
: Off W A T C H I N G T V
C H A N N E L C O N T R O L 31 WATCHING TV /CHANNEL CONTROL CHANNEL SETUP TV INPUT TV INPUT TV INPUT TV INPUT Auto Scan (Auto Tuning) STB MEDIA HOST Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list. Run Auto Tuning again after any Antenna/Cable connection changes. A password is required to gain access to Auto Tuning menu if the Lock System is turned on. STB MEDIA HOST STBSTB MEDIA HOST MEDIA HOST B R I G H T
MENU BRIGHT +
TIMER RATIO S I M P L I N K 1 2 3 Press the MMEENNUU button and then use DD or EE button to select the SSEETTUUPP menu. Auto Tuning Manual Tuning Channel Edit Press the GG button and then use DD or EE button to select AAuuttoo TTuunniinngg. BACK BACK PICTURE SAP CC PICTURE SOUND CC MARK USB EJECT MARK USB EJECT Press the EENNTTEERR button to begin the channel search. Allow AAuuttoo TTuunniinngg to complete the channel search cycle for AANNTTEENNNNAA and CCAABBLLEE. BACK PICTURE SOUND SAP MARK USB EJECT Auto Tuning G Manual Tuning Channel Edit Selection ( G or ) leads you to the Auto Tuning screen. NOTE Analog TV antenna Digital DTV antenna Analog CATV cable Digital CADTV cable Auto Tuning Manual Tuning Channel Edit Processing Auto Tuning... Selection ( G or ) leads DTV Ch.23 you to the Auto Tuning Found Channel(s): 16 screen. Press to stop the current scan and start ANALOG ANTENNA channel scan. Next MENU Prev MEDIA HOST BACK W A T C H I N G T V
C H A N N E L C O N T R O L 32 TV INPUT TV INPUT TV INPUT TV INPUT TV INPUT Add/Delete Channel (Manual Tuning) STB MEDIA HOST STB MEDIA HOST STBSTB MEDIA HOST MEDIA HOST A password is required to gain access to Manual Tuning menu if the Lock System is turned on. If selecting DTV or CADTV input signal, you can view the on-screen signal strength monitor to see the quality of the signal being received. B R I G H T
MENU BRIGHT +
TIMER RATIO S I M P L I N K Press the MMEENNUU button and then use DD or EE button to select the SSEETTUUPP menu. Auto Tuning Manual Tuning Channel Edit Press the GG button and then use DD or EE button to select MMaannuuaall TTuunniinngg. BACK PICTURE SOUND SAP CC BACK BACK MARK USB EJECT PICTURE SAP CC PICTURE SOUND CC MARK USB EJECT MARK USB EJECT 1 2 3 4 5 6 Press the GG button and then use DD or EE button to select DTV, TV, CADTV, and CATV. Press the GG button and then use DD or EE button to select channel number you want to add or delete. Press the EENNTTEERR button to add or delete for the channel number. Press EEXXIITT button to return to TV viewing or press MMEENNUU button to return to the previous menu. NOTE GG This digital channel number is a physical channel number, which is different from the normal channel number shown in Channel Edit. PICTURE MARK W A T C H I N G T V
C H A N N E L C O N T R O L 33 Auto Tuning Manual Tuning G Channel Edit Select channel type and RF-channel number. DTV 2 Auto Tuning Manual Tuning Channel Edit Select channel type and RF-channel number. DD EE DTV GG 12 DTV 12-0 Bad Normal Good Press to delete the channel. WATCHING TV /CHANNEL CONTROL TV INPUT TV INPUT TV INPUT TV INPUT Channel Editing STB MEDIA HOST STB MEDIA HOST STBSTB MEDIA HOST MEDIA HOST From the default channel list created from the Auto Tuning channel search, you can create two different types of chan-
nel lists in memory: custom list and favorite channel list. A custom list can be created by toggling each channel on or off with ENTER button. The channels in the Custom List are displayed in black and the channels deleted from the Custom List are displayed in gray. Once a channel is high-
lighted you can add or delete the channel by referring to the small window at the top-left corner of the screen. You can create your own Favorite List. Use the FFAAVV button on the remote control when a channel is highlighted and then add or delete the channel to/from your Favorite List. B R I G H T
MENU BRIGHT +
TIMER RATIO S I M P L I N K BACK CC Auto Tuning Manual Tuning Channel Edit BACK PICTURE SOUND CC 1 2 3 4 BACK Press the MMEENNUU button and then use DD or EE button to select the SSEETTUUPP menu. SOUND SAP CC PICTURE SAP PICTURE MARK USB EJECT MARK USB EJECT MARK USB EJECT Press the GG button and then use DD or EE button to select CChhaannnneell EEddiitt. Press the GG button. You will now see a screen filled with channel numbers and a preview picture. Use DD EE FF GG button to select a channel and then use the EENNTTEERR button to add or delete it. Press FFAAVV button to add the channel to the Favorite List. The surfing icon will appear in front of that channel number. Auto Tuning Manual Tuning Channel Edit G Selection ( G or
) leads you to the channel edit screen. 5 Press EEXXIITT button to return to TV viewing or press MMEENNUU button to return to the previous menu. W A T C H I N G T V
C H A N N E L C O N T R O L 34 INPUT LIST Press theIINNPPUUTT button to display external device that is con-
nected to the unit, on screen. Press the EENNTTEERR button to change the input to the active external device. Use the DD or EE button to select the input source. TV INPUT INPUT AV 2 STBSTB MEDIA HOST MEDIA HOST Input List Antenna Cable AV 1 AV 2 Component1 EE B R I G H T
MENU BRIGHT +
TIMER RATIO S I M P L I N K 1 If all external input sources are connected:
AAnntteennnnaa CCaabbllee AAVV11 AAVV22 CCoommppoonneenntt11 HHDDMMII33 HHDDMMII22 HHDDMMII11 RRGGBB--PPCC CCoommppoonneenntt22 2 If no external input sources are not connected:
AAnntteennnnaa CCaabbllee 3 If there is any external input source connected:
(ex: When connected only to AV 2) AAnntteennnnaa CCaabbllee AAVV22 PICTURE SOUND SAP CC MARK USB EJECT AAnntteennnnaa : Select it when watching the DTV/TV. CCaabbllee: Select it when watching the CADTV/CATV. AAVV 11,, AAVV 22 : Select it when watching the VCR or external equipment. CCoommppoonneenntt 11--22 : Select it when using the DVD or the Digital set-top box depend on connector. RRGGBB--PPCC : Select it when using PC depend on connector. HHDDMMII,, HHDDMMII22,, HHDDMMII33 : Select it when using DVD, PC or Digital set-top box depend on connector. W A T C H I N G T V
C H A N N E L C O N T R O L 35 WATCHING TV /CHANNEL CONTROL WATCHING TV /CHANNEL CONTROL W A T C H I N G T V
C H A N N E L C O N T R O L This operates only for the devices with the logo. Please check the logo. This allows you to control and play other AV devices connected to the display through HDMI cable without addi-
tional cables and settings. SimpLink Preparations 1 2 3 4 5 Connect the HDMI/DVI IN 1, 2 or 3 terminal of the TV to the rear terminal (HDMI output) of the SimpLink device with the HDMI cable. After connecting the HDMI jack for the home theater with simpLink function in the above method, connect the DIGITAL AUDIO OUT OPTICAL on the back of the TV to the DIGITAL AUDIO OUT terminal on the back of the simpLink device with the Optical cable. Press the MMEENNUU button and then use DD or EE button to select the OOPPTTIIOONN menu. Press the GG button and then use DD or EE button to select SSiimmppLLiinnkk. Press the GG button and then use DD or EE button to select OOnn . Press EEXXIITT button to return to TV viewing or press MMEENNUU button to return to the previous menu. TV INPUT TV INPUT STBSTB MEDIA HOST MEDIA HOST B R I G H T
MENU MENU BRIGHT +
TIMER RATIO S I M P L I N K Language : English Input label SimpLink Key Lock Caption Set ID
: Off
: Off
: Off
: 1 BACK PICTURE SOUND SAP CC MARK USB EJECT Language Input label SimpLink Key Lock Caption Set ID G Off On NOTE GG When operating the external device with SimpLink, press the TV button among the MODE button on the remote control. GG When you switch the Input source with the INPUT button on the remote control, you can stop the operation of device worked by SimpLink. GG When you select or operate the media device with home theater function, the speaker automatically switches to home theater speaker (HT speaker). GG When you execute Photo List, Music List function during DVD playback included in home theater sup-
ported the SimpLink stops and the applicable function is executed after switching the input to TV. 36 SimpLink Functions DDiirreecctt PPllaayy After connecting AV devices to TV, you can directly control the devices and play media without additional settings. TV INPUT TV INPUT TV INPUT SSeelleecctt AAVV ddeevviiccee Enables you to select one of AV devices connected to TV and play it. STB MEDIA HOST DDiisscc ppllaayybbaacckk Control connected AV devices by pressing the
, DDEEFF GG, EENNTTEERR buttons and buttons for play, pause, stop, fast reverse, fast forward, chapter skip.
, PPoowweerr ooffff aallll ddeevviicceess When you power off TV, all connected devices are turned off. SSwwiittcchh aauuddiioo--oouutt Offers an easy way to switch audio-out.
(A device, which is connected to TV through HDMI cable but does not support Simplink, does not provide this function) STBSTB MEDIA HOST MEDIA HOST B R I G H T
MENU BRIGHT +
TIMER RATIO S I M P L I N K S I M P L I N K S I M P L I N K After selecting the TT VV button of the MODE on the remote control, press the SSIIMMPPLLIINNKK button. BACK BACK PICTURE SOUND SAP CC PICTURE SOUND SAP CC 1 2 3 Use DD EE FF GG button to select the desired device and then press the EENNTTEERR button. USB EJECT MARK Control connected AV devices by pressing the
, DDEEFF GG, EENNTTEERR buttons. SimpLink Menu 1 TTVV vviieewwiinngg : Switch to the previous TV channel regardless of the current mode. 2 3 4 5 DDIISSCC ppllaayybbaacckk : Select and play discs. When multiple discs are available, the titles of the discs are conveniently dis-
played at the bottom of the screen. VVCCRR ppllaayybbaacckk : Play and control the connected VCR. HHDDDD RReeccoorrddiinnggss ppllaayybbaacckk : Play and control recordings stored in HDD. AAuuddiioo OOuutt ttoo HHTT ssppeeaakkeerr//AAuuddiioo OOuutt ttoo TTVV : Select HT speaker or TV speaker for Audio Out. 1 2 3 4 5 W A T C H I N G T V
C H A N N E L C O N T R O L 37 MARK USB EJECT GG Selected Device GG When no device is connected (displayed in gray) GG When a device is connected (displayed in bright color) WATCHING TV /CHANNEL CONTROL WATCHING TV /CHANNEL CONTROL INPUT LABEL TV INPUT TV INPUT TV INPUT TV INPUT Sets a label to each input source which is not in use when you press INPUT button. MEDIA HOST STB STB MEDIA HOST STBSTB MEDIA HOST MEDIA HOST B R I G H T
MENU BRIGHT +
TIMER RATIO S I M P L I N K Language : English Input label SimpLink Key Lock Caption Set ID
: Off
: Off
: Off
: 1 Press the MMEENNUU button and then use DD or EE button to select the OOPPTTIIOONN menu. Press the GG button and then use DD or EE button to select IInnppuutt LLaabbeell. BACK BACK BACK PICTURE SOUND SAP CC MARK USB EJECT PICTURE SAP CC PICTURE SOUND CC MARK USB EJECT MARK USB EJECT Press the GG button and then use DD or EE button to select the source: AV1, AV2, Component1, Component2, RGB-PC, HDMI1, HDMI2 or HDMI3. Press the FF or GG button to select the label. Press EEXXIITT button to return to TV viewing or press MMEENNUU button to return to the previous menu. Language Input label G SimpLink Key Lock Caption Set ID AV1 AV2 Component1 Cable Box VCR DVD Component2 Set Top Box RGB-PC HDMI1 HDMI2 HDMI3 VCR Game Satellite Cable Box 1 2 3 4 5 W A T C H I N G T V
C H A N N E L C O N T R O L 38 MEDIAHOST MEDIA MEDIAHOST MEDIA HOST HOST ENTRY MODES
[Media Host Menu]
When you connect a USB device or press the displayed, automatically. MEDIA HOST MEDIA HOST button, this screen is In USB device, you can not add a new folder or delete the existing folder. 1 2 Press the DD or EE button to select the desired item. Press the EENNTTEERR button to move to PPhhoottoo LLiisstt or MMuussiicc LLiisstt of USB device. 3 Press the UUSSBB EEJJEECCTT button of remote control before removing the USB device. BACK BACK PICTURE PICTURE SOUND SOUND SAPSAP CCCC MARKMARK USB EJECT USB EJECT NOTE Press the UUSSBB EEJJEECCTT button of remote control before removing the USB device. Only a USB storage device is recognizable. If the USB storage device is connected through a USB hub, the device is not recognizable. A USB storage device using an automatic recognition program may not be recognized. A USB storage device which uses its own driver may not be recognized. In case of a card reader, up to four memory cards are concurrently recognizable. The recognition speed of a USB storage device may depend on each device. Please do not turn off the TV or unplug the USB device when the connected USB storage device is working. When such device is suddenly separated or unplugged, the stored files or the USB storage device may be damaged. To unplug the USB storage device, please press the UUSSBB EEJJEECCTT button on the remote control, and then unplug it safely. Please do not connect the USB storage device which was artificially maneuvered on the PC. The device may cause the product to malfunction or fail to be played. Never forget to use only a USB storage device which has normal music files or image files. Please use only a USB storage device which was formatted as a FAT or a NTFS file system pro-
vided with the Windows operating system. In case of a storage device formatted as a different utility program which is not supported by Windows, it may not be recognized. In case of a hard disk drive (HDD) formatted as NTFS, writing and deletion are not allowable. Please connect power to a USB storage device which requires an external power supply. If not, the device may not be recognized. Please connect a USB storage device with cable is offered by USB maker. If connected with cable is not offered by USB maker or an excessively long cable, the device may not be recog-
nized. Some USB storage devices may not be supported or operated smoothly. If the name of a folder or file is too long, it will not be displayed or recognized. M E D I A H O S T 39 MEDIAHOST MEDIA HOST MEDIA MEDIAHOST HOST PHOTO LIST Its available to playback the photo file(*.jpg) in the USB device. The On Screen Display may be different from your set. Images are an example to assist with the TV operation. Screen Components Usable USB memory Current page/Total pages Total number of marked thumbnail photos Corresponding buttons on the remote control M E D I A H O S T 40 Photo Selection and PopUp Menu As shown, up to 15 thumbnail photos are listed per page. 1 2 3 Use the CCHH DD or EE button to navigate in the thumbnail photo page. Use the MMAARRKK button to mark or unmark a photo. When one or more photos are marked, you can view individual photos or a slide show of the marked photos. If no photos are marked, you can view all photos individually or all pho-
tos in the folder in a slide show. Use DD EE FF GG button to navigate the appropriate thumb-
nail photos, then press the EENNTTEERR button to show the PopUp menu. VViieeww : Display the selected item. MMaarrkk AAllll : Mark all photos on the screen. DDeelleettee : Delete the selected photo item. CCaanncceell : Close the pop-up menu. 4 Repeatedly, press EEXXIITT button to return to TV viewing or press the button to return to the Media Host menu. MEDIA HOST MEDIA HOST M E D I A H O S T 41 MEDIAHOST MEDIA HOST MEDIA MEDIAHOST HOST Set up the menu in Full-Sized Screen You can change the settings to display photos stored on a USB device, on a full-sized screen. Detailed operations are available on full-sized photo view screen. 1 Use the CCHH DD or EE button to navigate the thumbnail photo page. 2 Use DD EE FF GG button to navigate the appropriate thumb-
nail photos, then press the EENNTTEERR button to show the PopUp menu. 3 4 Use DD EE button to Move to the VViieeww menu, then press the EENNTTEERR button. The selected photo is displayed in full size. SSlliiddee SShhooww : When no picture is selected, all photos in the current folder are displayed during slide show. When selected, the selected photos are displayed during slide show. To start slide show, press EENNTTEERR button on
. I Set the time interval of the slide show in OOppttiioonn. I A slide show continues for a maximum of 4 hours. After 4 hours, the slide show will end and go to TV mode or external input mode. BBGGMM : Listen to music while viewing photos in full size. To start BGM, press EENNTTEERR button on I Set the BGM device and album in OOppttiioonn .
((RRoottaattee)) : Rotate photos. I Rotates the photo 90, 180, 270, 360 clock-
wise upon EENNTTEERR button on
((RRoottaattee)). DDeelleettee : Delete photos. UseFF or GG button to select DDeelleettee and press EENNTTEERR button. M E D I A H O S T 42 The aspect ratio of a photo may change the size of the photo displayed on the screen in full size. and press EENNTTEERR to save OOppttiioonn : Set values for SSlliiddee SSppeeeedd and MMuussiicc ffoollddeerr. Use FF or GGbutton to select OOppttiioonn and press EENNTTEERR button. I Use FF or GG button and EENNTTEERR button to set val-
ues. Then go to the settings. I You cannot change MMuussiicc FFoollddeerr while BGM is playing. HHiiddee : Hide the menu on the full-sized screen. Use FF or GG button to select HHiiddee and press EENNTTEERR button. I To see the menu again on the full-sized screen, press EENNTTEERR button to display. Use DD EE FF GG button to select the previous or next photo. 5 Use DD EE FF GG button to select and control the menu on the full-sized screen. 6 Use EEXXIITT button to go back to the photo list from the full-
sized screen. 7 Repeatedly, press EEXXIITT button to return to TV viewing or press button to return to the Media Host menu. MEDIA HOST MEDIA HOST NOTE If it is Progressive JPEG format, some photos may be not decorded. M E D I A H O S T 43 MEDIAHOST MEDIA HOST MEDIA MEDIAHOST HOST MUSIC LIST TV INPUT TV INPUT TV INPUT TV INPUT TV INPUT TV INPUT STB MEDIA HOST STB MEDIA HOST STB MEDIA HOST STBSTB MEDIA HOST MEDIA HOST Purchased music files(*.MP3) may contain copyright restrictions. Playback of these files may not be supported by this model. Music file on your USB device can be played by this unit. The On Screen Display may be different from your set. Images are an example to assist with the TV operation. B R I G H T
MENU BRIGHT +
TIMER RATIO S I M P L I N K Screen Components BACK PICTURE SOUND SAP BACK BACK SOUND SAP CC PICTURE SOUND SAP CC MARK USB EJECT Usable USB memory MARK USB EJECT MARK USB EJECT BACK PICTURE SOUND SAP CC MARK USB EJECT PICTURE MARK Current page/Total pages Total number of marked musics Current playing time/Total play-
ing time Corresponding buttons on the remote control M E D I A H O S T 44 Music Selection and PopUp Menu As shown , up to 8 music titles are listed per page. 1 2 Use the CCHH DD or EE button to navigate in the music titles page. Use MMAARRKK button to mark or unmark a music. When one or more music files are marked, the marked musics will be played in sequence. For example, if you want to listen to only one music repeatedly, just mark the music only and play it. If no music is marked, all the music in the folder will be played in sequence. 3 Use DD EE button to navigate the appropriate musics, then press the EENNTTEERR button to show up the pop-up menu. PPllaayy (During stop) : Play the selected musics. Once a music finishes playing, the next selected one will be played. When there are no selected musics to play, the next one in the current folder will be played. If you go to a different folder and press the EENNTTEERR button, the current music in play-
back will stop. SSttoopp PPllaayy (During playback) : Stop the playing musics. PPllaayy WWiitthh PPhhoottoo : Start playing the selected musics and then move to the Photo List. MMaarrkk AAllll : Mark all musics in the folder. DDeelleettee : Delete the selected musics. CCaanncceell : Close the pop-up menu. 4 Repeatedly, press EEXXIITT button to return to TV viewing or press button to return to the Media Host menu. MEDIA HOST MEDIA HOST I If you don't press any button for a while during the playing, the play information box (as shown in the below) will float as a screen saver. I The Screen Saver?
Screen saver is to prevent screen pixel damage due to an fixed image remaining on the screen for a extended period of time. M E D I A H O S T 45 NOTE When music is playing, is dis-
played in front of the music title. A damaged or corrupted music does not play but displays 00:00 in playtime. A music downloaded from a paid service with copyright protection does not start but displays inap-
propriate information in playtime. If you press EENNTTEERR,
, EEXXIITT buttons, screen saver is stopped. The buttons on the remote control are also available in this mode.
, TV INPUT TV INPUT TV INPUT TV INPUT STB MEDIA HOST PICTURE CONTROL MEDIA HOST STB STB MEDIA HOST STB MEDIA HOST STB MEDIA HOST PICTURE SIZE (ASPECT RATIO) CONTROL B R I G H T
MENU BRIGHT +
This feature lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV. When you receive an analog picture with a 4:3 aspect ratio on your 16:9 TV, you need to specify how the picture is to be displayed. I RGB-PC input source use 4:3 or 16:9 aspect ratio. TIMER RATIO RATIO S I M P L I N K 1 Press the RRAATTIIOO button repeatedly to select the desired picture format. You can also adjust AAssppeecctt RRaattiioo in the PPIICCTTUURREE menu. BACK BACK BACK BACK BACK SAP CC PICTURE SOUND SAP CC PICTURE SOUND SAP CC PICTURE SOUND SAP CC MARK USB EJECT Set by program Selects the proper picture proportion to match the sources image. USB EJECT MARK
(4:3 4:3)
(16:9 16:9) PICTURE SOUND SAP CC MARK USB EJECT Zoom 1 Choose Zoom 1 when you want to view the picture without any alteration. However, the top and bottom portions of the picture will be cropped. USB EJECT MARK Set By Program Set By Program Zoom 1 4:3 Choose 4:3 when you want to view a picture with an original 4:3 aspect ratio. Zoom 2 Choose Zoom 2 when you want the picture to be altered, both vertically extended and cropped. The picture taking a halfway trade off between alteration and screen coverage. 4:3 16:9 Adjust the picture horizontally, in a linear pro-
portion to fill the entire screen. Zoom 2 16:9 P I C T U R E C O N T R O L 46 BACK SAP CC PRESET PICTURE SETTINGS PICTURE SOUND CC BACK BACK BACK PICTURE SOUND SAP MARK USB EJECT PICTURE SOUND SOUND SAPSAP CCCC PICTURE SOUND MARKMARK USB EJECT USB EJECT MARK USB EJECT USB EJECT MARK USB EJECT Picture Mode -Preset Picture Mode adjusts the TV for the best picture appearance. Select the preset value in the Picture Mode menu based on the program category. IInntteelllliiggeenntt EEyyee, DDyynnaammiicc, SSttaannddaarrdd, MMiilldd Settings are preset for optimum picture quality at the factory and are not adjustable. In the UUsseerr 11, and UUsseerr 22 modes only, user can directly adjust the contrast, brightness, color, sharpness, tint. Press the PPIICCTTUURREE button repeatedly to select the picture appearance setup option as shown below :
IInntteelllliiggeenntt EEyyee, DDyynnaammiicc, SSttaannddaarrdd, MMiilldd, UUsseerr11, and UUsseerr22 (your own settings). Press the EEXXIITT button to save and return to TV viewing. 1 2 I You can also use the PPIICCTTUURREE menu to adjust Picture Mode. Picture Mode : User1 Color Temperature : Cool XD Advanced Aspect Ratio : 16:9 Picture Reset Screen TruM Demo Picture Mode G Intelligent Eye Color Temperature XD Advanced Aspect Ratio Picture Reset Screen TruM Demo Dynamic Standard Mild User 1 User 2 P I C T U R E C O N T R O L 47 PICTURE CONTROL TV INPUT TV INPUT TV INPUT TV INPUT Color Tone -Preset STB MEDIA HOST STB MEDIA HOST STBSTB MEDIA HOST MEDIA HOST B R I G H T
MENU BRIGHT +
TIMER RATIO S I M P L I N K Picture Mode : User1 Color Temperature : Cool XD Advanced Aspect Ratio : 16:9 Picture Reset Screen TruM Demo BACK PICTURE SOUND CC MARK USB EJECT Picture Mode Color Temperature G XD Advanced Aspect Ratio Picture Reset Screen TruM Demo Cool Medium Warm User Choose one of three automatic color adjustments. Set to warm to enhance hotter colors such as red, or set to cool to see less intense colors with more blue. When selecting Picture Mode options (Dynamic, Standard and Mild), CCoolloorr TTeemmppeerraattuurree is automatically change. When selecting Picture Mode options (User 1 and User 2), you can choose the CCoolloorr TTeemmppeerraattuurree. Press the MMEENNUU button and then use DD or EE button to select the PPIICCTTUURREE menu. BACK SAP CC Press the GG button and then use DD or EE button to select CCoolloorr TTeemmppeerraattuurree. BACK PICTURE SOUND SAP CC MARK USB EJECT PICTURE MARK USB EJECT Press the GG button and then use DD or EE button to select either CCooooll,, MMeeddiiuumm,, WWaarrmm or UUsseerr. Press EEXXIITT button to return to TV viewing or press MMEENNUU button to return to the previous menu. 1 2 3 4 P I C T U R E C O N T R O L 48 TV INPUT TV INPUT TV INPUT TV INPUT STB MEDIA HOST STB MEDIA HOST STB MEDIA HOST MANUAL PICTURE ADJUSTMENT Picture Mode -User Mode Adjust the picture appearance to suit your preference and viewing situations. B R I G H T
MENU BRIGHT +
TIMER RATIO S I M P L I N K 1 2 3 4 BACK Press the MMEENNUU button and then use DD or EE button to select the PPIICCTTUURREE menu. PICTURE PICTURE SOUND SAP CC MARK USB EJECT MARK USB EJECT Press the GG button and then use DD or EE button to select PPiiccttuurree MMooddee. Press the GG button and then use DD or EE button to select UUsseerr 11 or UUsseerr 22. Press the GG button and then use DD or EE button to select the desired picture option ((CCoonnttrraasstt,, BBrriigghhttnneessss,, CCoolloorr,, SShhaarrppnneessss,,TTiinntt or BBaacckk LLiigghhtt)). I [[BBaacckk LLiigghhtt]] To control the brightness of screen, adjust the brightness of LCD panel . 5 6 Press the GG button and then use FF or GG button to make appropriate adjustments. Press EEXXIITT button to return to TV viewing or press MMEENNUU button to return to the previous menu. BACK SAP CC Picture Mode : User1 Color Temperature : Cool XD Advanced Aspect Ratio : 16:9 BACK Picture Reset Screen TruM Demo PICTURE SOUND CC MARK USB EJECT Picture Mode Color Temperature XD Advanced Aspect Ratio Picture Reset Screen TruM Demo Intelligent Eye Dynamic Standard Mild User 1 G User 2 Selection ( G or ) leads you to the detailed setting screen. G R G User1 Contrast Brightness Color Sharpness Tint 85 50 50 50 0 Back Light 100 Press to confirm. MENU EE Contrast 85 EE PICTURE MARK P I C T U R E C O N T R O L 49 TV INPUT TV INPUT TV INPUT PICTURE CONTROL PICTURE CONTROL MEDIA HOST STB STB MEDIA HOST STB MEDIA HOST Color Tone -User Mode You can also adjust the detailed settings(Red, Green, Blue) by selecting the UUsseerr menu. This feature operate only if the picture mode set UUsseerr 11 or UUsseerr 22. BACK PICTURE SOUND SAP CC MARK USB EJECT BACK PICTURE SAP CC 1 2 3 4 5 Press the MMEENNUU button and then use DD or EE button to select the PPIICCTTUURREE menu. MARK USB EJECT Press the GG button and then use DD or EE button to select CCoolloorr TTeemmppeerraattuurree. Press the GG button and then use DD or EE button to select UUsseerr. Press the GG button and then use DD or EE button to select RReedd, GGrreeeenn, or BBlluuee. Press the GG button and then use FF or GG button to make appropriate adjustments. I The adjustment range of RR ee dd, GGrreeeenn, or BBlluuee is -20~ +20. 6 Press EEXXIITT button to return to TV viewing or press MMEENNUU button to return to the previous menu. B R I G H T
MENU BRIGHT +
TIMER RATIO S I M P L I N K Picture Mode : User1 Color Temperature : Cool PICTURE SOUND BACK CC XD Advanced MARK USB EJECT Aspect Ratio : 16:9 Picture Reset Screen TruM Demo Picture Mode Color Temperature XD Advanced Aspect Ratio Picture Reset Screen TruM Demo Cool Medium Warm User G Selection ( G or ) leads you to the detailed setting screen. G User Red Green Blue 0 0 0 Press to confirm. MENU EE Red EE 0 P I C T U R E C O N T R O L 50 XD - PICTURE IMPROVEMENT TECHNOLOGY TV INPUT TV INPUT TV INPUT TV INPUT TV INPUT STB MEDIA HOST XD is LG Electronics unique picture improving technology to display a real HD source through an digital signal process-
ing algorithm. When selecting Picture Mode options (Dynamic, Standard and Mild), XD is automatically change to Auto. When selecting Picture Mode options (User 1 and User 2), you can choose the Auto / Manual and when selecting Manual, you can adjust the XD Contrast, XD color and XD Noise. STB MEDIA HOST STBSTB MEDIA HOST MEDIA HOST B R I G H T
MENU BRIGHT +
TIMER RATIO S I M P L I N K 1 2 3 Press the MMEENNUU button and then use DD or EE button to select the PPIICCTTUURREE menu. Press the GG button and then use DD or EE button to select XXDD. BACK PICTURE SOUND SAP CC PICTURE MARK USB EJECT MARK USB EJECT Press the GG button and then use FF or GG button to select AAuuttoo or MMaannuuaall.
* SSeelleeccttiinngg tthhee MMaannuuaall 1. Press the EE button and then use DD or EE button to select XXDD CCoonnttrraasstt,, XXDD CCoolloorr or XXDD NNooiissee . I XXDD CCoonnttrraasstt :: Optimizing the contrast automatically according to the brightness of the reflection. I XXDD CCoolloorr :: Adjusting the colors of the reflec-
tion automatically to reproduce as closely as possible to the natural colors. I XXDD NNooiissee :: Removing the noise up to the point where it does not damage the original picture. 2. Use the FF or GG button to select OO nn or OO ff ff. 4 Press EEXXIITT button to return to TV viewing or press MMEENNUU button to return to the previous menu. Picture Mode : User1 Color Temperature : Cool XD Advanced Aspect Ratio : 16:9 BACK Picture Reset Screen TruM Demo PICTURE SOUND CC MARK USB EJECT BACK SAP CC Picture Mode Color Temperature XD G Manual Advanced Aspect Ratio Picture Reset Screen TruM Demo XD Contrast On XD Color On XD Noise On P I C T U R E C O N T R O L PICTURE MARK 51 PICTURE CONTROL ADVANCED -CINEMA 3:2 PULLDOWN MODE TV INPUT TV INPUT TV INPUT TV INPUT STB MEDIA HOST Set up the TV for the best picture appearance for viewing movies. This feature is disable only in RGB-PC, HDMI1, HDMI2, HDMI3 or Component1,2(except 480i) mode. When you operate Cinema (3:2 Pull-Down Mode or Cinema Correction Mode), the TV will adjust 24 fps video from movies to 30 fps video for display (This function is only available in TV(Analog, DTV), AV1, AV2, Component 480i mode.) STB Press the MMEENNUU button and then use DD or EE button to select the PPIICCTTUURREE menu. Press the GG button and then use DD or EE button to select AAddvvaanncceedd. BACK PICTURE SOUND SAP CC PICTURE BACK SAP CC MEDIA HOST STBSTB MEDIA HOST MEDIA HOST B R I G H T
MENU BRIGHT +
TIMER RATIO S I M P L I N K Picture Mode : User1 Color Temperature : Cool XD Advanced Aspect Ratio : 16:9 Picture Reset Screen TruM Demo BACK PICTURE SOUND CC MARK USB EJECT MARK USB EJECT MARK USB EJECT Press the GG button and then use DD or EE button to select CCiinneemmaa 33::22 MMooddee. Press the GG button and then use FF or GG button to select OOnn or OOffff. Press EEXXIITT button to return to TV viewing or press MMEENNUU button to return to the previous menu. Picture Mode Color Temperature XD Advanced G Aspect Ratio Picture Reset Screen TruM Demo Cinema 3:2 Mode Off Black Level Low TruM Low 1 2 3 4 5 P I C T U R E C O N T R O L 52 ADVANCED - BLACK (DARKNESS) LEVEL Adjusting the contrast and the brightness of the screen using the black level of the screen. TV INPUT TV INPUT TV INPUT TV INPUT TV INPUT This feature operates only in HDMI1, HDMI2, HDMI3 or AV1, AV2 mode. MEDIA HOST STB STB MEDIA HOST STBSTB MEDIA HOST MEDIA HOST 1 2 3 4 Press the MMEENNUU button and then use DD or EE button to select the PPIICCTTUURREE menu. Press the GG button and then use DD or EE button to select AAddvvaanncceedd. BACK SAP SOUND PICTURE Press the GG button and then use DD or EE button to select BBllaacckk lleevveell. USB EJECT PICTURE MARK CC MARK USB EJECT B R I G H T
MENU BRIGHT +
TIMER RATIO S I M P L I N K Picture Mode : User1 Color Temperature : Cool XD Advanced Aspect Ratio : 16:9 BACK SAP CC Picture Reset Screen TruM Demo BACK PICTURE SOUND CC MARK USB EJECT P I C T U R E C O N T R O L PICTURE MARK Press the GG button and then use FF or GG button to select LLooww, or HHiigghh. I LLooww The reflection of the screen gets darker. I HHiigghh The reflection of the screen gets brighter. Picture Mode Color Temperature XD Advanced G Cinema 3:2 Mode Off Aspect Ratio Picture Reset Screen TruM Demo Black Level Low TruM Low 5 Press EEXXIITT button to return to TV viewing or press MMEENNUU button to return to the previous menu. 53 PICTURE CONTROL ADVANCED - TruM TV INPUT TV INPUT TV INPUT TV INPUT STB MEDIA HOST Set up the TV for best picture with film judder cancellation that provides stunningly steady movements. This feature is disable in RGB-PC, HDMI-PC mode. And when HDMI is set to the PC in IInnppuutt LLaabbeell, TTrruuMM is also disable. STB MEDIA HOST STBSTB MEDIA HOST MEDIA HOST B R I G H T
MENU BRIGHT +
TIMER RATIO S I M P L I N K 1 2 3 4 Press the MMEENNUU button and then use DD or EE button to select the PPIICCTTUURREE menu. BACK Press the GG button and then use DD or EE button to select AAddvvaanncceedd. PICTURE SOUND SAP CC PICTURE Picture Mode : User1 Color Temperature : Cool XD Advanced Aspect Ratio : 16:9 Picture Reset Screen TruM Demo BACK PICTURE SOUND CC BACK SAP CC MARK USB EJECT MARK USB EJECT MARK USB EJECT Press the GG button and then use DD or EE button to select TTrruuMM. Press the GG button and then use FF or GG button to select OOffff, LLooww, or HHiigghh. I LLooww Set amount of film judder to low. I HHiigghh Set amount of film judder to high. Picture Mode Color Temperature XD Advanced G Cinema 3:2 Mode Off Aspect Ratio Picture Reset Screen TruM Demo Black Level Low TruM High
* If you have some problem in viewing picture, set TTrruuMM to LLooww or OOffff. 5 Press EEXXIITT button to return to TV viewing or press MMEENNUU button to return to the previous menu. P I C T U R E C O N T R O L 54 TruM DEMO TV INPUT TV INPUT TV INPUT TV INPUT TV INPUT Use it to see the difference between TruM Demo on and TruM Demo off. MEDIA HOST STB STB MEDIA HOST STBSTB MEDIA HOST MEDIA HOST B R I G H T
MENU BRIGHT +
TIMER RATIO S I M P L I N K Picture Mode : User1 Color Temperature : Cool XD Advanced Aspect Ratio : 16:9 Picture Reset Screen TruM Demo BACK PICTURE SOUND CC BACK SAP CC 1 2 3 4 Press the MMEENNUU button and then use DD or EE button to select the PPIICCTTUURREE menu. BACK Press the GG button and then use DD or EE button to select TTrruuMM DDeemmoo. PICTURE SOUND SAP CC PICTURE MARK USB EJECT MARK USB EJECT MARK USB EJECT Press the GG button to begin TTrruuMM DDeemmoo. To stop TTrruuMM DDeemmoo, press the EEXXIITT button. Picture Mode Color Temperature XD Advanced Aspect Ratio Picture Reset Screen TruM Demo G Selection ( G or ) leads you to the TruM Demo. TruM Demo TruM On TruM Off P I C T U R E C O N T R O L PICTURE MARK 55 PICTURE CONTROL PICTURE RESET TV INPUT TV INPUT TV INPUT TV INPUT Use to quickly reset all the Picture menu options to their original factory preset values. MEDIA HOST STB STB MEDIA HOST STBSTB MEDIA HOST MEDIA HOST B R I G H T
MENU BRIGHT +
TIMER RATIO S I M P L I N K Picture Mode : User1 Color Temperature : Cool XD Advanced Aspect Ratio : 16:9 Picture Reset Screen TruM Demo BACK PICTURE SOUND CC BACK SAP CC Press the MMEENNUU button and then use DD or EE button to select the PPIICCTTUURREE menu. Press the GG button and then use DD or EE button to select PPiiccttuurree RReesseett. BACK PICTURE SOUND SAP CC PICTURE MARK USB EJECT MARK USB EJECT MARK USB EJECT Press the GG button to reset the Picture menu options to original values. Picture Mode Color Temperature XD Advanced Aspect Ratio Picture Reset G Screen TruM Demo Selection ( G or ) resets to the factory settings(defaults). 1 2 3 P I C T U R E C O N T R O L 56 SOUND & LANGUAGE CONTROL AUTO VOLUME LEVELER (AUTO VOLUME) TV INPUT TV INPUT TV INPUT TV INPUT TV INPUT STB MEDIA HOST Scans for changes in sound levels during commercials, then adjusts the sound to match the specified audio level. Auto Volume makes sure that the volume level remains consistent whether you are watching a commercial or a regular TV pro-
gram. STB MEDIA HOST STBSTB MEDIA HOST MEDIA HOST B R I G H T
MENU BRIGHT +
TIMER RATIO S I M P L I N K Press the MMEENNUU button and then use DD or EE button to select the AAUUDDIIOO menu. Sound Mode : Standard Auto Volume
: On Balance : 0 TV Speaker : On Press the GG button and then use DD or EE button to select AAuuttoo VVoolluummee. BACK PICTURE SOUND SAP CC PICTURE BACK SAP CC BACK PICTURE SOUND CC MARK USB EJECT MARK USB EJECT MARK USB EJECT Press the GG button and then use DD or EE button to select OOnn or OOffff. Press EEXXIITT button to return to TV viewing or press MMEENNUU button to return to the previous menu. Sound Mode Auto Volume G Balance TV Speaker Off On 1 2 3 4 PICTURE MARK S O U N D
L A N G U A G E C O N T R O L 57 SOUND & LANGUAGE CONTROL PRESET SOUND SETTINGS (SOUND MODE) Sound Mode lets you enjoy the best sound without any special adjust-
ment because the TV sets the appropriate sound options based on the program content. Standard, Music, Movie, Sports and User are preset for good sound quality at the factory and are not adjustable. USB EJECT BACK PICTURE SOUND MARK SAP CC BACK BACK PICTURE PICTURE SOUND SAPSAP CCCC MARKMARK USB EJECT USB EJECT Press the SSOOUUNNDD button repeatedly to select the appropriate sound setup as shown below:
SSttaannddaarrdd, MMuussiicc, MMoovviiee, SSppoorrttss and UUsseerr (your own settings). Press EEXXIITT button to return to TV viewing . 1 2 I You can also adjust Sound Mode in the AAUUDDIIOO menu. Sound Mode : Standard Auto Volume
: On Balance : 0 TV Speaker : On Sound Mode G Auto Volume Balance TV Speaker Standard Music Movie Sports User S O U N D
L A N G U A G E C O N T R O L 58 TV INPUT SOUND SETTING ADJUSTMENT - USER MODE TV INPUT TV INPUT TV INPUT TV INPUT Adjust the sound to suit your taste and room situations. MEDIA HOST STB STB MEDIA HOST STBSTB MEDIA HOST MEDIA HOST 1 2 3 4 5 Press the MMEENNUU button and then use DD or EE button to select the AAUUDDIIOO menu. Press the GG button and then use DD or EE button to select SSoouunndd MMooddee. Press the GG button and then use DD or EE button to select UUsseerr. BACK PICTURE Press the GG button and then use DD or EE button to select the desired sound option (TTrreebbllee, BBaassss, or FFrroonntt SSuurrrroouunndd). USB EJECT PICTURE SOUND MARK SAP CC MARK USB EJECT SAP Press the GG button and then use FF or GG button to make appropriate adjustments. SSeelleeccttiinngg tthhee FFrroonntt ssuurrrroouunndd Press the GG button and then use FF or GG button to select OO ff ff, 33DD EEcchhooSSoouunndd SSyysstteemm or SS RR SS (Sound Retrieval System) TTrruuSSuurrrroouunndd XXTT. 6 Press EEXXII TT button to return to TV viewing or press MM EE NN UU button to return to the previous menu. SSRRSS TTrruuSSuurrrroouunndd XXTT Takes advantage of any multi-channel format without needing to add extra speakers or equipment. Dialog clarity, bass enrichment, and the addition of stereo audio enhancement produces an immersive sound experience from standard stereo material. 33DD EEcchhooSSoouunndd SSyysstteemm Creates a stunning simulated stereo effect from any mono sound and a realistic three-dimensional sound with a very wide and deep sound stage. BACK CC B R I G H T
MENU BRIGHT +
TIMER RATIO S I M P L I N K Sound Mode Auto Volume Balance TV Speaker Standard Music Movie Sports User G BACK PICTURE SOUND Selection ( G or ) leads you to the detailed setting screen. CC MARK USB EJECT User Treble 50 Bass 50 Front Surround Off G Press to confirm. MENU Front Surround 3D EchoSound System PICTURE MARK S O U N D
L A N G U A G E C O N T R O L 59 SOUND & LANGUAGE CONTROL BALANCE TV INPUT TV INPUT TV INPUT TV INPUT Adjust the left/right sound of speaker to suit your taste and room situations. MEDIA HOST STB STB MEDIA HOST STBSTB MEDIA HOST MEDIA HOST B R I G H T
MENU BRIGHT +
TIMER RATIO S I M P L I N K Press the MMEENNUU button and then use DD or EE button to select the AAUUDDIIOO menu. Sound Mode : Standard Auto Volume
: On Balance : 0 TV Speaker : On Press the GG button and then use DD or EE button to select BBaallaannccee. BACK PICTURE SOUND SAP CC PICTURE SAP BACK CC BACK PICTURE SOUND CC MARK USB EJECT MARK USB EJECT MARK USB EJECT Press the GG button and then use FF or GG button to make appropriate adjustments. Press EEXXIITT button to return to TV viewing or press MMEENNUU button to return to the previous menu. Sound Mode Auto Volume Balance TV Speaker 0 L Balance 0 L R R 1 2 3 4 S O U N D
L A N G U A G E C O N T R O L 60 STEREO/SAP BROADCAST SETUP CC SAP MARK SOUND PICTURE PICTURE BACK BACK USB EJECT This TV can receive MTS stereo programs and any SAP
(Secondary Audio Program) that accompanies the stereo pro-
gram if the station transmits an additional sound signal as well as the original one and when you select Stereo or SAP on the remote control. Mono sound is automatically received if the broadcast is only in Mono; even though Stereo or SAP has been selected. Select Mono if you want to listen to the mono sound in remote areas during stereo/SAP broadcasting. Stereo or SAP can be received in Analog channel. USB EJECT MARK SAP CC 1 Use the SSAAPP button to select your desired MTS mode in analog signal. Each time you press the SSAAPP button, Mono, Stereo, or SAP appear in turn. I If other languages available on the digital signal, select them with the SSAAPP button. Press EEXXIITT button to save and return to TV viewing. 2 BACK BACK PICTURE PICTURE SOUND SOUND SAP CCCC MARKMARK USB EJECT USB EJECT PICTURE MARK S O U N D
L A N G U A G E C O N T R O L 61 SOUND & LANGUAGE CONTROL TV INPUT TV SPEAKERS ON/OFF SETUP TV INPUT STB MEDIA HOST STB Turn the TV speakers off if using external audio equipment. Feature turns the TV Speakers option On or Off. TV INPUT TV INPUT MEDIA HOST STBSTB MEDIA HOST MEDIA HOST B R I G H T
MENU BRIGHT +
TIMER RATIO S I M P L I N K 1 Press the MMEENNUU button and then use DD or EE button to select the AAUUDDIIOO menu. Sound Mode : Standard Auto Volume
: On Balance : 0 TV Speaker : On 2 3 BACK Press the GG button and then use DD or EE button to select TTVV SSppeeaakkeerr. PICTURE PICTURE SOUND SAP CC BACK SAP CC BACK PICTURE SOUND CC MARK USB EJECT MARK USB EJECT MARK USB EJECT Press the GG button and then use DD or EE button to select OOnn or OOffff. 4 Press EEXXIITT button to return to TV viewing or press MMEENNUU button to return to the previous menu. Sound Mode Auto Volume Balance TV Speaker G Off On S O U N D
L A N G U A G E C O N T R O L 62 TV INPUT AUDIO LANGUAGE TV INPUT TV INPUT TV INPUT TV INPUT STB MEDIA HOST STB Other languages may be available if a digital signal is pro-
vided by the broadcasting station. This feature operate only in DTV/CADTV mode. MEDIA HOST STBSTB MEDIA HOST MEDIA HOST B R I G H T
MENU BRIGHT +
TIMER RATIO S I M P L I N K Language : English Input Label SimpLink Key Lock Caption Set ID
: Off
: Off
: Off
: 1 BACK PICTURE SOUND CC MARK USB EJECT BACK SAP CC Press the MMEENNUU button and then use DD or EE button to select the OOPPTTIIOONN menu. BACK PICTURE SOUND SAP CC Press the GG button and then use DD or EE button to select LLaanngguuaaggee. USB EJECT PICTURE MARK MARK USB EJECT Press the GG button and then use DD or EE button to select AAuuddiioo. Press the GG button and then use FF or GG button to select : English, Spanish, or French. Press EEXXIITT button to return to TV viewing or press MMEENNUU button to return to the previous menu. G Menu English Audio English G Menu Audio English English Language Input Label SimpLink Key Lock Caption Set ID Language Input Label SimpLink Key Lock Caption Set ID 1 2 3 4 5 PICTURE MARK S O U N D
L A N G U A G E C O N T R O L 63 SOUND & LANGUAGE CONTROL ON-SCREEN MENUS LANGUAGE SELECTION TV INPUT TV INPUT TV INPUT TV INPUT The menus can be shown on the screen in the selected lan-
guage. First select your language. MEDIA HOST STB STB MEDIA HOST STBSTB MEDIA HOST MEDIA HOST B R I G H T
MENU BRIGHT +
TIMER RATIO S I M P L I N K Language : English Input Label SimpLink Key Lock Caption Set ID
: Off
: Off
: Off
: 1 Press the MMEENNUU button and then use DD or EE button to select the OOPPTTIIOONN menu. Press the GG button and then use DD or EE button to select LLaanngguuaaggee. BACK PICTURE SOUND SAP CC PICTURE BACK SAP CC BACK PICTURE SOUND CC MARK USB EJECT MARK USB EJECT MARK USB EJECT Press the GG button and then use DD or EE button to select MMeennuu. Press the GG button and then use FF or GG button to select your desired language. From this point on, the on-screen menus will be shown in the selected language. 5 Press EEXXIITT button to return to TV viewing or press MMEENNUU button to return to the previous menu. G Menu English Audio English G Menu Audio English English Language Input Label SimpLink Key Lock Caption Set ID Language Input Label SimpLink Key Lock Caption Set ID 1 2 3 4 S O U N D
L A N G U A G E C O N T R O L 64 BACK CAPTION MODE BACK PICTURE SAP CC PICTURE SOUND CC BACK BACK PICTURE PICTURE SOUND SOUND SAPSAP CC MARKMARK USB EJECT USB EJECT MARK MARK USB EJECT MARK USB EJECT Caption must be provided to help people with hearing loss watch TV. Use the CC CC button to select Caption OO nn or OO ff ff. I When selecting OO ff ff, Sub-menus for Analog, DTV, and Digital Option become disabled. Press EEXXIITT to save and return to TV viewing. 1 2 I You can also adjust CCaappttiioonn in the OOPPTTIIOONN menu. Language : English Input Label SimpLink Key Lock Caption Set ID
: Off
: Off
: Off
: 1 Language Input Label SimpLink Key Lock Caption Set ID G Mode On Analog Text1 Digital Service3 Digital Option S O U N D
L A N G U A G E C O N T R O L 65 SOUND & LANGUAGE CONTROL Analog Broadcasting System Captions Select a caption mode for displaying captioning information if provided on a program. Analog caption displays informa-
tion at any position on the screen and is usually the pro-
gram's dialog. Caption/Text, if provided by the broadcaster, would be available for both digital and analog channels on the Antenna/Cable. This TV is programmed to memoririze the caption/text mode which was last set when you turn the power off. This function is only available when CCaappttiioonn Mode is set OO nn. 1 2 3 4 Press the MMEENNUU button and then use DD or EE button to select the OOPPTTIIOONN menu. Press the GG button and then use DD or EE button to select CCaappttiioonn.. Press the GG button and then use DD or EE button to select AAnnaalloogg.. Use FF or GG button to select CC CC 11, CC CC 22, CC CC 33, CC CC 44, TTeexxtt11, TTeexxtt22, TTeexxtt33 or TTeexxtt44 I CCAAPPTTIIOONN The term for the words that scroll across the bottom of the TV screen; usually the audio portion of the program provided for the hearing impaired. I TTEEXXTT The term for the words that appear in a large black frame and almost cover the entire screen; usually mes-
sages provided by the broadcaster. 5 Press EEXXII TT button to return to TV viewing or press MM EE NN UU button to return to the previous menu. S O U N D
L A N G U A G E C O N T R O L 66 Language : English Input Label SimpLink Key Lock Caption Set ID
: Off
: Off
: Off
: 1 Language Input Label SimpLink Key Lock Caption Set ID Mode Analog Digital On Text1 Service3 Digital Option TV INPUT TV INPUT TV INPUT TV INPUT TV INPUT Digital Broadcasting System Captions STB MEDIA HOST STB MEDIA HOST STBSTB MEDIA HOST MEDIA HOST Choose the language you want the DTV/CADTV Captions to appear in. Other Languages can be chosen for digital sources only if they are included on the program. This function in only available when Caption Mode is set On. Press the MMEENNUU button and then use DD or EE button to select the OOPPTTIIOONN menu. BACK Press the GG button and then use DD or EE button to select CCaappttiioonn. PICTURE SOUND SAP CC PICTURE SAP B R I G H T
MENU BRIGHT +
TIMER RATIO S I M P L I N K Language : English Input Label SimpLink Key Lock Caption Set ID
: Off
: Off
: Off
: 1 BACK CC BACK PICTURE SOUND CC MARK USB EJECT MARK USB EJECT MARK USB EJECT Press the GG button and then use DD or EE button to select DDiiggiittaall. Use FF or GG button to select SSeerrvviiccee11 ~ SSeerrvviiccee66. Language Input Label SimpLink Key Lock Caption Set ID Mode Analog Digital On Text1 Service3 Digital Option 5 Press EEXXII TT button to return to TV viewing or press MM EE NN UU button to return to the previous menu. 1 2 3 4 PICTURE MARK S O U N D
L A N G U A G E C O N T R O L 67 SOUND & LANGUAGE CONTROL TV INPUT Caption Option STB MEDIA HOST TV INPUT TV INPUT TV INPUT STB MEDIA HOST STBSTB MEDIA HOST MEDIA HOST Customize the DTV/CADTV captions that appear on your screen. This function is only available when CCaappttiioonn Mode is set OO nn. Press the MMEENNUU button and then use DD or EE button to select the OOPPTTIIOONN menu. Press the GG button and then use DD or EE button to select CCaappttiioonn. Press the GG button and then use DD or EE button to select DDiiggiittaall OOppttiioonn. BACK PICTURE SOUND SAP CC PICTURE SAP B R I G H T
MENU BRIGHT +
TIMER RATIO S I M P L I N K Language : English Input Label SimpLink Key Lock Caption Set ID
: Off
: Off
: Off
: 1 BACK CC BACK PICTURE SOUND CC MARK USB EJECT MARK USB EJECT MARK USB EJECT Press the GG button and then use FF or GG button to select CCuussttoomm. Use DD or EE button to customize the Style, Font, etc., to your preference. A preview icon is provided at the bottom of the screen, use it to see the caption language. I SSiizzee:: Set the size the words will appear in. I FFoonntt:: Select a typeface for the words. I TTeexxtt CCoolloorr:: Choose a color for the text. I TTeexxtt OOppaacciittyy:: Specify the opacity for the text color. I BBgg ((BBaacckkggrroouunndd))CCoolloorr:: Select a background color. I BBgg ((BBaacckkggrroouunndd))OOppaacciittyy:: Select the opacity for the background color. I EEddggee TTyyppee:: Select an edge type. I EEddggee CCoolloorr:: Select a color for the edges. Language Input Label SimpLink Key Lock Caption Set ID Language Input Label SimpLink Key Lock Caption Set ID Mode Analog Digital On Text1 Service3 Digital Option G Selection ( Gor ) leads you to the Caption Option screen. Mode Analog Digital On Text1 Custom Style Size A Standard Font Font 0 Text Color White Text Opacity Solid Bg Color Black Bg Opacity Solid Edge Type None Edge Color Black Service3 Digital Option G Selection ( Gor ) leads you to the Caption Option screen. 6 Press EEXXIITT button to return to TV viewing or press MMEENNUU button to return to the previous menu. 1 2 3 4 5 S O U N D
L A N G U A G E C O N T R O L 68 TV INPUT TV INPUT TV INPUT TV INPUT TIME SETTING CLOCK SETTING TV INPUT Auto Clock Setup STB MEDIA HOST The time is set automatically from a digital channel signal. The digital channel signal includes information for the cur-
rent time provided by the broadcasting station. Set the clock manually if the current time is set incorrectly by the auto clock function. STB 1 2 3 4 Press the MMEENNUU button and then use DD or EE button to select the TTIIMMEE menu. Press the GG button and then use DD or EE button to select CClloocckk. BACK PICTURE SOUND SAP CC PICTURE SAP Press the GG button and then use DD or EE button to select AAuuttoo. Press the GG button and then use DD or EE button to select your viewing area time zone :
U.S.A: EEaasstteerrnn, CCeennttrraall, MMoouunnttaaiinn, PPaacciiffiicc, AAllaasskkaa or HHaawwaaiiii. Canada: EEaasstteerrnn, CCeennttrraall, MMoouunnttaaiinn, PPaacciiffiicc, NNeeww FF..llaanndd or AAttllaannttiicc. 5 Press the GG button and then use DD or EE button to select AAuuttoo, OOffff, OOnn, depending on whether or not your viewing area observes Daylight Saving time. 6 Press EEXXIITT button to return to TV viewing or press MMEENNUU button to return to the previous menu. MEDIA HOST STBSTB MEDIA HOST MEDIA HOST B R I G H T
MENU BRIGHT +
TIMER RATIO S I M P L I N K Clock : Oct 19, 2006, 03:44 AM Off Time On Time Sleep Time Auto Sleep
: Off
: Off
: Off
: Off BACK CC BACK PICTURE SOUND CC Clock Off Time On Time Sleep Time Auto Sleep Clock Off Time On Time Sleep Time Auto Sleep G Auto Year - - - -
Date - - / - -
Time - - : - - - -
Time Zone Daylight Saving Eastern Auto G Auto Year - - - -
Date - - / - -
Time - - : - - - -
Time Zone Eastern Daylight Saving Auto MARK USB EJECT MARK USB EJECT MARK USB EJECT PICTURE MARK I T M E S E T T I N G 69 TIME SETTING TV INPUT TV INPUT TV INPUT TV INPUT Manual Clock Setup STB MEDIA HOST STB MEDIA HOST STBSTB MEDIA HOST MEDIA HOST If the current time setting is wrong, reset the clock manually. B R I G H T
MENU BRIGHT +
TIMER RATIO S I M P L I N K Clock : Oct 19, 2006, 03:44 AM Off Time On Time Sleep Time Auto Sleep
: Off
: Off
: Off
: Off BACK SAP CC BACK PICTURE SOUND CC Press the MMEENNUU button and then use DD or EE button to select the TTIIMMEE menu. BACK Press the GG button and then use DD or EE button to select CClloocckk. PICTURE SOUND SAP CC PICTURE MARK USB EJECT MARK USB EJECT MARK USB EJECT Press the GG button and then use DD or EE button to select MMaannuuaall. Press the GG button and then use FF or GG button to select either the year, date, or time option. Once selected, use the DD or EE button to set the year, date, and time options. Clock Off Time On Time Sleep Time Auto Sleep G Manual Year - - - -
Date - - / - -
Time - - : - - - -
1 2 3 4 5 Press EEXXIITT button to return to TV viewing or press MMEENNUU button to return to the previous menu. I T M E S E T T I N G 70 AUTO ON/OFF TIME SETTING TV INPUT TV INPUT TV INPUT TV INPUT TV INPUT STB MEDIA HOST The timer function operates only if the current time has been set. The Off-Time function overrides the On-Time function if they are both set to the same time. The TV must be in standby mode for the On-Time to work. If you do not press any button within 2 hours after the TV turns on with the On Time function, the TV will automati-
cally revert to standby mode. STB MEDIA HOST STBSTB MEDIA HOST MEDIA HOST B R I G H T
MENU BRIGHT +
TIMER RATIO S I M P L I N K 1 2 3 4 5 6 Press the MMEENNUU button and then use DD or EE button to select the TTIIMMEE menu. Press the GG button and then use DD or EE button to select OOffff TTiimmee or OOnn TTiimmee. BACK BACK Clock : Oct 19, 2006, 03:44 AM Off Time On Time Sleep Time Auto Sleep
: Off
: Off
: Off
: Off BACK PICTURE SOUND SAP CC MARK USB EJECT PICTURE SAP CC PICTURE SOUND CC MARK USB EJECT Clock Off Time On Time Sleep Time Auto Sleep G Off On Time 6 : 30 AM Ch. TV 2-0 Vol 17 Press the GG button and then use DD or EE button to select OOnn. I To cancel OOnn//OOffff TTiimmee function, select OOffff. MARK USB EJECT Press the GG button and then use DD or EE button to set the hour. Press the GG button and then use DD or EE button to set the minutes. OOnnllyy OOnn TTiimmee Press the GG button and then use DD or EE button to select the channel at turn-on. Press the GG button and then use DD or EE button to set the sound level at turn-on. 7 Press EEXXIITT button to return to TV viewing or press MMEENNUU button to return to the previous menu. PICTURE MARK I T M E S E T T I N G 71 TIME SETTING SLEEP TIME SETTING TV INPUT TV INPUT The Sleep Time turns the TV off at the preset time. Note that this setting is cleared when the TV is turned off. You can also set up the Sleep Time in the TIME menu. MEDIA HOST MEDIA HOST STB STB TV INPUT TV INPUT TV INPUT TV INPUT STB MEDIA HOST STBSTB MEDIA HOST MEDIA HOST 1 2 3 4 Press the TTIIMMEERR button repeatedly to select the number of minutes. First the OOffff option appears on the screen, followed by the following Sleep Time options : 10, 20, 30, 60, 90, 120, 180, and 240 minutes. When the number of minutes you want is displayed on the screen, press the EENNTTEERR button. The timer begins to count down from the number of minutes selected. BACK BACK BACK PICTURE PICTURE SOUND SOUND SOUND SAP SAP SAP CC CC CC B R I G H T
MENU BRIGHT +
TIMER TIMER RATIO S I M P L I N K BACK PICTURE SOUND SAP CC MARK USB EJECT MARK USB EJECT MARK USB EJECT MARK USB EJECT To check the remaining minutes before the TV turns off, press the TTIIMMEERR button once. To cancel the Sleep Time, press the TTIIMMEERR button repeatedly to select OOffff. I You can also set up the Sleep Time in the TIME menu. Clock : Oct 19, 2006, 03:44 AM Off Time On Time Sleep Time Auto Sleep
: Off
: Off
: Off
: Off Clock Off Time On Time Sleep Time Auto Sleep G Off 10 min 20 min 30 min 60 min 90 min 120 min 180 min 240 min PICTURE MARK MEDIA HOST BACK I T M E S E T T I N G 72 AUTO SHUT-OFF SETTING TV INPUT TV INPUT TV INPUT TV INPUT TV INPUT TV will be automatically turned off, in case of no signal inTV
& input source or no remote control input for 10 minutes. MEDIA HOST STB STB MEDIA HOST STBSTB MEDIA HOST MEDIA HOST B R I G H T
MENU BRIGHT +
TIMER RATIO S I M P L I N K Clock : Oct 19, 2006, 03:44 AM Off Time On Time Sleep Time Auto Sleep
: Off
: Off
: Off
: Off BACK BACK 1 2 3 4 Press the MMEENNUU button and then use DD or EE button to select the TTIIMMEE menu. Press the GG button and then use DD or EE button to select AAuuttoo SSlleeeepp. BACK PICTURE SOUND SAP CC MARK USB EJECT PICTURE SAP CC PICTURE SOUND CC MARK USB EJECT MARK USB EJECT Press the GG button and then use DD or EE button to select OOnn or OOffff. Press EEXXIITT button to return to TV viewing or press MMEENNUU button to return to the previous menu. Clock Off Time On Time Sleep Time Auto Sleep TV will be automatically turned off, in case of No Signal for 10 minutes. G Off On PICTURE MARK I T M E S E T T I N G 73 PARENTAL CONTROL / RATINGS Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcasting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by choosing the type of the program and the categories. It is also possi-
ble to block all program viewing for a time period. To use this function, the following must be done :
1. Set ratings and categories to be blocked. 2. Specify a password 3. Enable the lock V-Chip rating and categories Rating guidelines are provided by broadcasting stations. Most television programs and television movies can be blocked by TV Rating and/or Individual Categories. Movies that have been shown at the theaters or direct-to-video movies use the Movie Rating System (MPAA) only. Ratings for Television programs including made-for-TV movies:
I TV-G (General audience) I TV-PG (Parental guidance suggested) I TV-14 (Parents strongly cautioned) I TV-MA (Mature audience only) I TV-Y I TV-Y7 (Children 7 years older)
(All children) SET PASSWORD & LOCK SYSTEM TV INPUT TV INPUT TV INPUT Setting up your Password STB MEDIA HOST STB MEDIA HOST STB MEDIA HOST ST Set up blocking schemes to block specific channels, ratings, and external viewing sources. A password is required to gain access to this menu. 1 Press the MMEENNUU button and then use the DD or EE button to select the LLOOCCKK menu. Then, press the GG button. I Enter the password as requested. I The TV is set up with the initial password 0-0-0-0. Enter Password B R I G H T
MENU BRIGHT +
TIMER RATIO S I M P L I N K BACK PICTURE SOUND SAP CC BACK BACK P A R E N T A L C O N T R O L
R A T I N G 74 Set Password Change the password by inputting a new password twice. For USA For Canada 1 2 After inputting the password, use the DD or EE button to choose SSeett ppaasssswwoorrdd. Press the GG button and then choose any 4 digits for your new password and enter the them on the nneeww. As soon as the 4 digits are entered, reenter the same 4 digits on the CCoonnffiirrmm. Then your changed password has been memorized. 3 Press EEXXIITT button to return to TV viewing or press MMEENNUU button to return to the previous menu. Lock System Enables or disables the blocking scheme you set up previously. 1 2 After inputting the password, use the DD or EE button to choose LLoocckk SSyysstteemm. Press the GG button and then use the DD or EE to select OOnn or OOffff. I When you select, the Lock System is enable. 3 Press EEXXIITT button to return to TV viewing or press MMEENNUU button to return to the previous menu. Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Input Block Lock System : Off Set Password Block Channel TV Rating-English TV Rating-French Input Block G New Confirm Lock System Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Input Block For USA For Canada Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Input Block Lock System : Off Set Password Block Channel TV Rating-English TV Rating-French Input Block Off On Lock System G Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Input Block P A R E N T A L C O N T R O L
R A T I N G 75 PARENTAL CONTROL /RATINGS CHANNEL BLOCKING Blocks any channels that you do not want to watch or that you do not want your children to watch. 1 2 3 4 After inputting the password, use the DD or EE button to choose BBlloocckk CChhaannnneell. Press the GG button. You will now see a screen filled with channel numbers and a preview picture. Use DD EE FF GG button to select a channel and then use the EENNTTEERR button to block or unblock it. Press EEXXIITT button to return to TV viewing or press MMEENNUU button to return to the previous menu. For USA For Canada Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Input Block Lock System : Off Set Password Block Channel TV Rating-English TV Rating-French Input Block Lock System Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Input Block G Selection ( G or ) leads you to the block channel screen. P A R E N T A L C O N T R O L
R A T I N G 76 MOVIE & TV RATING Movie Rating (MPAA) -for USA only Blocks movies according to the movie ratings limits speci-
fied, so children cannot view certain movies. You can set the ratings limit by blocking out all the movies with the ratings above a specified level. Keep in mind that the movie ratings limit only applies to movies shown on TV, not TV programs, such as soap operas. 1 2 After inputting the password, use the DD or EE button to choose MMoovviiee RRaattiinngg. Press the GG button and then use the DD or EE to select GG, PPGG, PPGG--1133, RR, NNCC--1177 or XX. I G (General audiences) I PG (Parental guidance suggested) I PG-13 (Parents strongly cautioned) I R (Restricted) I NC-17 (No one 17 and under admitted) I X (Adult only) I Blocking Off (Permits all programs) GG If you set PG-13 : G and PG movies will be available, PG-13, R, NC-17 and X will be blocked. 3 Press EEXXIITT button to return to TV viewing or press MMEENNUU button to return to the previous menu. Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Input Block Lock System Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Input Block G Blocking off : permits all programs G PG PG-13 R NC-17 X Blocking Off P A R E N T A L C O N T R O L
R A T I N G 77 PARENTAL CONTROL /RATINGS TV Rating Children - for USA only Prevents children from watching certain children's TV programs, according to the ratings limit set. The children rating does not apply to other TV programs. Unless you block certain TV programs intended for mature audiences in the TV Rating - sub menu, your children can view those programs. 1 2 After inputting the password, use the DD or EE button to choose TTVV RRaattiinngg--CChhiillddrreenn. Press the GG button and then use the DD or EE to select AAggee, or FFaannttaassyy VViioolleennccee. Press the GG button and then use the DD or EE button to select block options. I Age(applies to TV-Y, TV-Y7) I Fantasy Violence(applies to TV-Y7) 3 Press EEXXIITT button to return to TV viewing or press MMEENNUU button to return to the previous menu. TV Rating General - for USA only Based on the ratings, blocks certain TV programs that you and your family do not want to view. 1 2 After inputting the password, use the DD or EE button to choose TTVV RRaattiinngg--GGeenneerraall. Press the GG button and then use the DD or EE button to select AAggee, DDiiaalloogguuee, LLaanngguuaaggee, SSeexx or VViioolleennccee. Press the GG button and then use the DD or EE button to select block options. I Age(applies to TV-G,TV-PG,TV-14,TV-MA) I Dialogue-sexual dialogue(applies to TV-PG,TV-14) I Language-adult language(applies to TV-PG,TV-14,TV-MA) I Sex-sexual situations(applies to TV-PG,TV-14,TV-MA) I Violence(applies to TV-PG,TV-14,TV-MA) 3 Press EEXXIITT button to return to TV viewing or press MMEENNUU button to return to the previous menu. P A R E N T A L C O N T R O L
R A T I N G 78 Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Input Block Lock System Set Password Block Channel Movie Rating TV Rating-Children G TV Rating-General Input Block Age Fantasy Violence Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Input Block Lock System Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General G Input Block Age Dialogue Language Sex Violence TV Rating english - for CANADA only Selecting canadian english language rating system. 1 2 After inputting the password, use the DD or EE button to choose TTVV RRaattiinngg--EEnngglliisshh. Press the GG button and then use the DD or EE button to select EE, CC, CC88++, GG, PPGG, 1144++, 1188++, or BBlloocckkiinngg OOffff. I E(Exempt) I C(Children) I C8+(Children eight years and older) I G(General programming, suitable for all audiences) I PG(Parental Guidance ) I 14+(Viewers 14 years and older) I 18+(Adult programming) I Blocking Off(Permits all programs) 3 Press EEXXIITT button to return to TV viewing or press MMEENNUU button to return to the previous menu. TV Rating french - for CANADA only Selecting canadian french language rating system. 1 2 After inputting the password, use the DD or EE button to choose TTVV RRaattiinngg--FFrreenncchh. Press the GG button and then use the DD or EE button to select EE, GG, 88 aannss++, 1133 aannss++, 1166 aannss++, 1188 aannss++, or BBlloocckkiinngg OOffff. I E(Exempt) I G(General) I 8 ans+(General-Not convenient for little children) I 13 ans+(Not convenient for children of 13 years and younger) I 16 ans+(Not convenient for children of 16 years and younger) I 18 ans+(This programs is only for adults) I Blocking Off(Permits all programs) 3 Press EEXXIITT button to return to TV viewing or press MMEENNUU button to return to the previous menu. Lock System : Off Set Password Block Channel TV Rating-English TV Rating-French Input Block Lock System Set Password Block Channel TV Rating-English G TV Rating-French Input Block Blocking off : permits all programs E C C8+
G PG 14+
18+
Blocking Off Lock System : Off Set Password Block Channel TV Rating-English TV Rating-French Input Block Lock System Set Password Block Channel TV Rating-English TV Rating-French G Input Block Blocking off : permits all programs E G 8 ans+
13 ans+
16 ans+
18 ans+
Blocking Off P A R E N T A L C O N T R O L
R A T I N G 79 PARENTAL CONTROL /RATINGS EXTERNAL INPUT BLOCKING Enables you to select a source to block from the external source devices you have hooked up. 1 2 3 4 After inputting the password, use the DD or EE button to choose IInnppuutt BBlloocckk. Press the GG button and then use the DD or EE to select a source. Press the GG button and then use the FF or GG to select OOnn or OOffff on the each source. Press EEXXIITT button to return to TV viewing or press MMEENNUU button to return to the previous menu. KEY LOCK The TV can be set up so that it can only be used with the remote control. This feature can be used to prevent unauthorized viewing by locking out the front panel controls. This TV is programmed to remember which option it was last set to even if you turn the TV off. 1 2 3 Press the MMEENNUU button and then use DD or EE button to select the OOPPTTIIOONN menu. Press the GG button and then use DD or EE button to select KKeeyy LLoocckk. Press the GG button and then use DD or EE button to select OOnn or OOffff. 4 Press EEXXIITT button to return to TV viewing or press MMEENNUU button to return to the previous menu. P A R E N T A L C O N T R O L
R A T I N G 80 For USA For Canada Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Input Block Lock System : Off Set Password Block Channel TV Rating-English TV Rating-French Input Block Lock System Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Input Block G AV1 On AV2 On Component1 Off Component2 On RGB-PC Off HDMI1 On HDMI2 Off HDMI3 Off Language : English Input Label SimpLink Key Lock Caption Set ID
: Off
: Off
: Off
: 1 Language Input Label SimpLink Key Lock Caption Set ID G Off On APPENDIX TROUBLESHOOTING TThhee ooppeerraattiioonn ddooeess nnoott wwoorrkk nnoorrmmaallllyy.. The remote control doesnt work I Check to see if there is any object between the product and the remote control causing obstruction. Ensure you are pointing the remote control directly at the TV. I Ensure that the batteries are installed with correct polarity (+ to +, - to -). I Ensure that the correct remote operating mode is set: TV, VCR etc. I Install new batteries. Power is suddenly turned off I Is the sleep timer set?
I Check the power control settings. Power interrupted. I No broadcast on station tuned with Auto off activated. TThhee vviiddeeoo ffuunnccttiioonn ddooeess nnoott wwoorrkk.. No picture & No sound I Check whether the product is turned on. I Try another channel. The problem may be with the broadcast. I Is the power cord inserted into wall power outlet?
I Check your antenna direction and/or location. I Test the wall power outlet, plug another products power cord into the outlet where the products power cord was plugged in. Picture appears slowly after switching on I This is normal, the image is muted during the product startups process. Please contact your service center, if the picture has not appeared after five minutes. No or poor color or poor picture Horizontal/vertical bars or picture shaking I Adjust Color in menu option. I Keep a sufficient distance between the product and the VCR. I Try another channel. The problem may be with the broadcast. I Are the video cables installed properly?
I Activate any function to restore the brightness of the picture. I Check for local interference such as an electrical appliance or power tool. Poor reception on some channels I Station or cable product experiencing problems, tune to another station. I Station signal is weak, reorient antenna to receive weaker station. I Check for sources of possible interference. Lines or streaks in pictures I Check antenna (Change the direction of the antenna). A P P E N D I X 81 APPENDIX TThhee aauuddiioo ffuunnccttiioonn ddooeess nnoott wwoorrkk.. Picture OK & No sound No output from one of the speakers Unusual sound from inside the product I Press the VOL or VOLUME button. I Sound muted? Press MUTE button. I Try another channel. The problem may be with the broadcast. I Are the audio cables installed properly?
I Adjust Balance in menu option. I A change in ambient humidity or temperature may result in an unusual noise when the product is turned on or off and does not indicate a fault with the product. TThheerree iiss aa pprroobblleemm iinn PPCC mmooddee.. ((OOnnllyy PPCC mmooddee aapppplliieedd)) The signal is out of range
(Invalid format) I Adjust resolution, horizontal frequency, or vertical frequency. I Check the input source. Vertical bar or stripe on background &
Horizontal Noise &
Incorrect position I Work the Auto configure or adjust clock, phase, or H/V position. (Option) Screen color is unstable or single color I Check the signal cable. I Reinstall the PC video card. A P P E N D I X 82 MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can enjoy your new TV. Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen 1 2 Heres a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until its almost dry, and then use it to wipe the screen. Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV. Cleaning the Cabinet I To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth. I Please be sure not to use a wet cloth. Extended Absence CAUTION If you expect to leave your TV dormant for a long time (such as a vacation), its a good idea to unplug the power cord to protect against possible damage from lightning or power surges. A P P E N D I X 83 APPENDIX PRODUCT SPECIFICATIONS I The specifications shown above may be changed without prior notice for quality improvement. MODELS 42LBX 47LBX 52LBX
(42LB9DF-UA)
(47LB9DF-UA)
(52LB9DF-UA) Dimensions Including stand 40.6 x 30.7 x 13.8 inches 40.7 x 29.5 x 11.3 inches 45.1 x 32.5 x 13.0 inches 1030.0 x 781.0 x 350.0 mm 1033.1 x 750.0 x 287.6 mm 1144.5 x 825.6 x 331.0 mm
(Width x Height x Depth) Excluding stand 40.6 x 27.3 x 3.5 inches 40.7 x 27.0 x 3.5 inches 45.1 x 29.7 x 4.1 inches 1030.0 x 693.0 x 88.5 mm 1033.1 x 686.5 x 88.5 mm 1144.5 x 754.9 x 103.0 mm Weight including stand excluding stand 56.9 pounds / 25.8kg 60.6 pounds / 27.5 kg 82.7 pounds / 37.5kg 48.3 pounds / 21.9kg 50.7 pounds / 23.0 kg 69.2 pounds / 31.4kg Power requirement Television System Program Coverage AC100-240V ~ 50/60Hz NTSC-M, ATSC, 64 & 256 QAM VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135 External Antenna Impedance 75 ohm Environment condition Operating Temperature Operating Humidity Storage Temperature Storage Humidity 32 ~ 104F (0 ~ 40C) Less than 80%
-4 ~ 140F (-20 ~ 60C) Less than 85%
A P P E N D I X 84 PROGRAMMING THE REMOTE CONTROL The provided universal remote control can be programmed to operate most remote-controllable devices. Note that the remote may not control all models of other brands. Programming a code into a remote mode To find out whether your remote control can operate each device without programming, turn on the device
(such as a VCR) and press the corresponding mode button on the remote. After that, press the PPOOWWEERR button. If the device is turned off and it responds properly the remote control need not be programmed. If not, the remote should be programmed to operate the device. The program-
ming procedures are explained below. Press the MMEENNUU and MMUUTTEE button continuously at the same time for two seconds; the currently selected device button is illuminated. If you don't press any button for 20 seconds, the light on the mode button will be turned off. In that case, you have to repeat from step 2. Enter the appropriate code from the code table on the following pages. When pressing the button, the light blinks at a time. If the device turned off, the programming is successful. Press the MMEENNUU button to store the code. After blinking twice, this code is stored. Test the remote control functions to see if the device responds properly. If not, steps 2-5. 1 2 3 4 5 A P P E N D I X 85 APPENDIX Remote control code Codes Brand Codes Brand Codes VCRs Brand AIWA AKAI 034 016 043 046 124 125 146 072 031 033 103 AMPRO ANAM AUDIO DYNAMICS 012 023 039 043 035 037 129 BROKSONIC 028 031 033 CANON 108 CAPEHART CRAIG 003 040 135 CURTIS MATHES 031 033 041 DAEWOO 005 007 010 064 065 108 110 111 112 116 117 119 108 012 023 039 043 034 053 059 006 017 025 027 029 031 034 035 036 037 046 101 129 131 138 153 003 008 009 010 034 031 033 063 072 107 109 144 147 132 136 012 045 004 018 026 034 043 063 137 150 DAYTRON DBX DYNATECH ELECTROHOME EMERSON FISHER FUNAI GE GO VIDEO HARMAN KARDON HITACHI INSTANTREPLAY 031 033 031 033 JCL 012 013 015 033 JCPENNY 040 066 101 043 012 031 033 043 048 050 055 060 130 150 152 014 034 039 043 047 048 JENSEN JVC KENWOOD LLOYD LXI LG (GOLDSTAR) 001 012 013 020 101 106 114 123 034 003 009 013 014 017 034 101 106 040 MAGIN MAGNAVOX MARANTZ MARTA MATSUI MEI MEMOREX MGA MINOLTA MITSUBISHI MTC MULTITECH NEC NORDMENDE OPTONICA PANASONIC PENTAX PHILCO PHILIPS PILOT PIONEER PORTLAND PULSAR QUARTZ QUASAR RCA REALISTIC RICO RUNCO SALORA 031 033 034 041 067 068 012 031 033 067 069 101 027 030 031 033 003 010 014 031 033 034 053 072 101 102 134 139 045 046 059 013 020 013 020 045 046 049 051 059 061 151 034 040 024 034 012 023 039 043 048 043 053 054 066 070 074 083 133 140 145 013 020 031 033 063 031 034 067 031 033 034 054 067 071 101 101 013 021 048 108 072 011 014 033 066 075 145 013 020 033 034 040 041 062 063 107 109 140 144 145 147 003 008 010 014 031 033 034 040 053 054 101 058 148 014 SEARS SCOTT SAMSUNG SANSUI SANYO SHARP SHINTOM SONY SOUNDESIGN STS SYLVANIA 032 040 102 104 105 107 109 112 113 115 120 122 125 022 043 048 135 003 007 010 014 102 134 017 037 112 129 131 003 008 009 010 013 014 017 020 031 042 073 081 101 031 054 149 024 003 009 031 052 056 057 058 076 077 078 149 034 013 031 033 034 059 067 034 010 034 039 043 034 039 043 031 033 070 019 031 033 034 101 034 006 008 013 042 047 059 082 112 131 040 101 TOTEVISION UNITECH 040 VECTOR RESEARCH 012 VICTOR 048 VIDEO CONCEPTS 012 034 046 VIDEOSONIC WARDS SYMPHONIC TANDY TATUNG TEAC TECHNICS TEKNIKA THOMAS TMK TOSHIBA 040 003 013 017 024 031 033 034 040 053 054 131 012 034 039 043 034 048 056 058 072 080 101 YAMAHA ZENITH A P P E N D I X 86 Codes Brand Codes 074 Cable Box Brand ABC 003 004 039 042 046 052 053 112 014 005 007 014 024 026 092 007 007 AJIN ANTRONIK ARCHER CABLE STAR CENTURION CENTURY CITIZEN COLOUR VOICE 065 090 080 081 COMBANO 019 030 COMTRONICS 023 DIAMOND EAGLE 020 030 040 057 062 066 EASTERN 032 ELECTRICORD 072 GE 008 022 025 054 GEMINI GI 052 074 GOLDEN CHANNEL 030 HAMLIN HITACHI HOSPITALITY JERROLD 049 050 055 052 055 070 077 002 003 004 008 009 010 052 069 LG (GOLDSTAR) 001 106 101 005 M-NET MACOM MAGNAVOX MEMOREX MOVIE TIME NSC 037 033 010 012 064 079 100 028 032 015 028 038 071 073 016 031 037 053 044 047 100 OAK PANASONIC PARAGON PHILIPS PIONEER 006 012 013 020 065 085 090 034 051 052 063 076 POST NEWS WEEK016 PRUCER 059 011 048 071 072 PTS 073 074 100 047 049 050 057 PULSAR RCA REGAL REGENCY Brand Codes 025 REMBRANT SAMSUNG 102 107 030 068 SCIENTIFIC ATLANTA 003 011 041 042 SHERITECH SIGNAL SIGNATURE SL MARX SPRUCER STARCOM STARGATE TADIRAN TAEKWANG TAIHAN TANDY TEXSCAN TOCOM TOSHIBA UNIKA UNITED CABLE UNIVERSAL VIEWSTAR ZENITH 043 045 046 022 030 052 030 047 078 002 004 008 009 008 030 030 110 105 017 029 039 040 056 100 007 014 024 004 053 005 007 014 024 026 027 032 035 012 015 018 086 087 088 089 100 114 060 093 HDSTB Brand Codes Brand Codes Brand Codes HOUSTON TRACKER 033 037 039 051 ALPHASTAR DSR 123 050 AMPLICA BIRDVIEW 051 126 129 CHANNEL MASTER 013 014 015 018 036 055 008 009 012 077 054 CHAPARRAL CITOH CURTIS MATHES 050 145 DRAKE DX ANTENNA ECHOSTAR 005 006 007 010 011 052 112 116 141 024 046 056 076 038 040 057 058 093 094 095 096 097 098 099 100 122 ELECTRO HOME 089 114 EUROPLUS FUJITSU 017 021 022 027 133 134 GENERAL INSTRUMENT 003 004 016 029 HITACHI 031 059 101 139 140 HUGHES JANIEL JERROLD KATHREIN LEGEND LG LUTRON LUXOR MACOM 057 104 068 060 147 061 108 057 001 132 062 144 010 059 063 064 065 057 028 124 125 069 070 MEMOREX NEXTWAVE NORSAT PACE SKY SATELLITE 143 060 142 PANASONIC PANSAT 121 PERSONAL CABLE 117 071 PHILIPS 105 PICO 019 102 PRESIDENT PRIMESTAR 030 110 111 PROSAT RCA REALISTIC SAMSUNG SATELLITE SERVICE CO 028 035 047 057 072 066 106 043 074 123 085 SCIENTIFIC ATLANTA 032 138 SONY STARCAST SUPER GUIDE TEECOM 103 041 020 124 125 023 026 075 087 088 090 107 130 137 002 127 016 025 042 043 044 045 048 049 078 079 080 086 101 135 136 115 128 146 081 082 083 084 091 120 TOSHIBA UNIDEN VIEWSTAR WINEGARD ZENITH A P P E N D I X 87 APPENDIX Audio Brand AIWA AKAI ANAM BURMECTER CARVER CLARION DAEWOO DENON FANTASIA FINEARTS FISHER LG(GOLDSTAR) HAITAI HARMAN/KARDON JVC KEC KOHEL NAD KENWOOD INKEL A P P E N D I X Codes Brand Codes 014 028 070 096 125 129 139 229 230 163 003 014 017 023 059 106 189 216 217 235 236 252 086 199 027 053 060 084 102 148 198 221 015 075 130 143 071 022 089 099 001 021 024 029 087 107 108 110 190 191 192 210 211 212 239 034 035 188 222 068 004 013 141 185 186 187 030 045 046 038 050 067 089 170 171 197 206 215 222 037 058 062 069 078 079 095 121 122 149 150 151 152 153 154 155 157 158 159 160 189 207 222 224 225 226 227 243 247 014 016 036 098 100 172 173 174 175 176 177 178 179 180 181 183 201 202 208 213 214 219 223 232 238 240 103 111 002 018 020 025 034 041 081 090 097 112 049 104 107 046 013 040 041 047 048 056 057 132 133 140 158 007 033 064 113 142 220 241 251 104 026 112 143 039 042 043 063 065 091 093 094 115 123 127 250 113 080 LOTTE LXI MAGNAVOX MARANTZ MCINTOSH MCS MEMOREX NAD ONKYO OPTIMUS PANASONIC PENNEY PHILIPS PIONEER QUASAR RCA Brand RCX REALISTIC SAMSUNG SANSUI SANYO SCOTT SHARP SHERWOOD SONY TAEKWANG TEAC TECHNICS TOSHIBA THE VICTOR WARDS YAMAHA Codes 092 103 106 124 145 146 182 193 194 195 203 204 244 245 246 011 135 138 144 019 083 234 106 186 031 032 051 052 072 082 117 119 156 184 199 200 206 209 005 006 158 044 045 109 114 118 126 248 249 012 020 073 074 076 077 105 161 162 163 164 165 166 167 168 169 205 231 233 242 010 085 106 136 185 187 237 101 113 128 134 147 218 137 061 088 131 089 054 055 066 092 199 DVD Brand Codes 022 020 014 005 006 027 APEX DIGITAL DENON GE HARMAN KARDON JVC LG MAGNAVOX MARANTZ 012 001 010 016 025 013 024 Brand MITSUBISHI NAD ONKYO PANASONIC PHILIPS PIONEER PROCEED PROSCAN Codes 002 023 008 017 003 009 013 004 026 021 005 006 Brand Codes RCA SAMSUNG SONY THOMPSON TOSHIBA YAMAHA ZENITH 005 006 011 015 007 005 006 019 008 009 018 010 016 025 88 IR CODES 1. How to Connect I Connect your wired remote control to the Remote Control port on the TV. 2. Remote Control IR Codes I Output waveform Single pulse, modulated with 37.917KHz signal at 455KHz Tc T1 Carrier frequency FCAR = 1/TC = fOSC/12 Duty ratio = T1/TC = 1/3 I Configuration of frame 1st frame Lead code Low custom code High custom code Data code Data code C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 Repeat frame I Lead code I Repeat code Repeat code Tf 9 ms 4.5 ms 9 ms 2.25 ms I BBiitt ddeessccrriippttiioonn Bit 0 0.55 ms Bit 1 0.56 ms 1.12 ms 0.56 ms 2.24 ms I FFrraammee iinntteerrvvaall:: TTff The waveform is transmitted as long as a key is depressed. Tf Tf A P P E N D I X Tf=108ms @455KHz 89 APPENDIX Code
(Hexa) Function Note Code
(Hexa) Function Note 0F 0B 08 79 0E TV INPUT Remote Control Button BF COMPONENT1 Discrete IR Code INPUT POWER RATIO TIMER Remote Control Button
(Component1 Input Selection) Remote Control Button (Power On/Off) D4 COMPONENT2 Discrete IR Code Remote Control Button
(Component2 Input Selection) Remote Control Button D5 RGB-PC Discrete IR Code 10-19 Number Key 0-9 Remote Control Button
(RGB-PC Input Selection) 4C 1A 09 02 03 00 01 1E 39 40 41 07 06 44 34 43 33 52 4D 5B 7E 0A D6
- (Dash) Remote Control Button CE HDMI1 Discrete IR Code BACK MUTE VOL DD VOL EE CH DD CH EE FAV CC DD EE FF GG ENTER BRIGHT-
MENU BRIGHT+
SOUND PICTURE EXIT Remote Control Button
(HDMI1 Input Selection) Remote Control Button CC HDMI2 Discrete IR Code Remote Control Button Remote Control Button Remote Control Button Remote Control Button Remote Control Button Remote Control Button Remote Control Button
(HDMI2 Input Selection) 76 77 AF Ratio 4:3 Discrete IR Code
(Only 4:3 Mode) Ratio 16:9 Discrete IR Code
(Only 16:9 Mode) Ratio Zoom Discrete IR Code
(Only Zoom1 Mode) Remote Control Button C4 POWER ON Discrete IR Code Remote Control Button
(Only Power On) Remote Control Button C5 POWER OFF Discrete IR Code
(Only Power Off) 7C 7D CA MEDIA HOST R/C Button MARK USB EJECT R/C Button R/C Button Remote Control Button Remote Control Button Remote Control Button Remote Control Button Remote Control Button Remote Control Button Remote Control Button SIMPLINK Remote Control Button SAP TV Remote Control Button Discrete IR Code
(TV Input Selection) 5A AV1 Discrete IR Code
(AV1 Input Selection) D0 AV2 Discrete IR Code
(AV2 Input Selection) A P P E N D I X 90 EXTERNAL CONTROL THROUGH RS-232C Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the products functions externally. Connect the serial port of the control device to the RS-232C jack on the product back panel. Note: RS-232C connection cables are not supplied with the product. RS-232C Setup PC Type of Connector; D-Sub 9-Pin Male No. Pin Name 1 2 3 4 5 6 7 8 9 No connection RXD (Receive data) TXD (Transmit data) DTR (DTE side ready) GND DSR (DCE side ready) RTS (Ready to send) CTS (Clear to send) No Connection A P P E N D I X 91 APPENDIX RS-232C Configurations 7-Wire Configurations (Standard RS-232C cable) 3-Wire Configurations(Not standard) RXD TXD GND DTR DSR RTS CTS TV INPUT PC 2 3 5 4 6 7 8 STB D-Sub 9 MEDIA HOST PDP 3 2 5 6 4 8 7 TXD RXD GND DSR DTR CTS RTS TV INPUT PC PDP RXD TXD GND DTR DSR RTS CTS 2 3 5 4 6 7 8 3 2 5 6 4 7 8 TV INPUT TXD RXD GND DTR DSR RTS CTS D-Sub 9 STB MEDIA HOST D-Sub 9 D-Sub 9 STB MEDIA HOST Set ID Use this function to specify a TV ID number. Refer to Real Data Mapping 1. pp..9955 1 2 3 Press the MMEENNUU button and then use DD or EE button to select the OOPPTTIIOONN menu. Press the GG button and then use DD or EE button to select SSEETT IIDD. BACK PICTURE SOUND SAP CC MARK USB EJECT PICTURE MARK USB EJECT Press the GG button and then use DD or EE button to adjust SSEETT IIDD to choose the desired TV ID number. The adjustment range of SET ID is 1~99. B R I G H T
MENU BRIGHT +
TIMER RATIO S I M P L I N K Language : English Input label SimpLink Key Lock Caption Set ID
: Off
: Off
: Off
: 1 BACK SAP CC BACK PICTURE SOUND CC MARK USB EJECT Language Input label SimpLink Key Lock Caption Set ID G 1 4 Press EEXXIITT button to return to TV viewing or press MMEENNUU button to return to the previous menu. Communication Parameters I Baud rate : 9600 bps (UART) I Data length : 8 bits I Parity : None I Stop bit : 1 bit I Communication code : ASCII code I Use a crossed (reverse) cable. NOTE This product has command echo back in the RS-232C Command. A P P E N D I X 92 Command Reference List CCOOMMMMAANNDD11 CCOOMMMMAANNDD22 DATA
(Hexadecimal) CCOOMMMMAANNDD11 CCOOMMMMAANNDD22 DATA
(Hexadecimal) 01. Power 02. Input Select 03. Aspect Ratio 04. Screen Mute 05. Volume Mute 06. Volume Control 07. Contrast 08. Brightness 09. Color 10. Tint 11. Sharpness k k k k k k k k k k k a b c d e f g h i j k 0 ~ 1 0 ~ 9
0 ~ 1 0 ~ 1 0 ~ 64 0 ~ 64 0 ~ 64 0 ~ 64 0 ~ 64 0 ~ 64 12. OSD Select 13. Remote Control/
Key Lock 14. Treble 15. Bass 16. Balance 17. Color Temperature 18. Red adjustment 19. Green adjustment 20. Blue adjustment k k k k k k k k k l m r s t u v w
0 ~ 1 0 ~ 1 0 ~ 64 0 ~ 64 0 ~ 64 0 ~ 3 0 ~ C8 0 ~ C8 0 ~ C8 CCOOMMMMAANNDD11 CCOOMMMMAANNDD22 DATA0 DATA1 DATA2 DATA3 DATA4 DATA5
(Hexadecimal)
(Hexadecimal)
(Hexadecimal)
(Hexadecimal)
(Hexadecimal)
(Hexadecimal) 21. Tune Command 22. Channel Add/Del 23. Key 24. Input Select 25. Back Light m m m a b c physical major program high program low 0~1 key code x m g 0~64 b
major low minor high minor low attribute A P P E N D I X 93 APPENDIX Transmission / Receiving Protocol TTrraannssmmiissssiioonn OOKK AAcckknnoowwlleeddggeemmeenntt
[[CCoommmmaanndd11]][[CCoommmmaanndd22]][[ ]][[SSeett IIDD]][[ ]][[DDaattaa]][[CCrr]]
[[CCoommmmaanndd22]][[ ]][[SSeett IIDD]][[ ]][[OOKK]][[DDaattaa]][[xx]]
[Command 1] : First command to control the set.(j, k, m or x)
[Command 2] : Second command to control the set.
[Set ID] : You can adjust the set ID to choose desired TV ID number in Setup menu. Adjustment range is 1~ 99. When selecting Set ID 0, every connected the TV is controlled. Set ID is indicated as decimal (1~
99) on menu and as Hexa decimal (0x0~ 0x63) on transmission/receiving protocol.
[DATA] : To transmit command data. Transmit FF data to read status of command.
[Cr] : Carriage Return ASCII code 0x0D
[ ] : ASCII code space (0x20)
*In this model, TV will not send the status during the standby mode. The TV transmits ACK (acknowledgement) based on this format when receiving normal data. At this time, if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the data of the PC com-
puter.
*in this model, TV will not send the status during the standby mode.
*data format
[command 2] : use as command.
[Set ID] : use the small character, if set ID is 10, it will send the 0,a
[Data] : use the small character, if data is 0xab, it will send the a, b
[OK] : use the large character
*in this model, TV will send the echo, CR, LF with ack mes-
sage. When it send the power on ack message, it will be like below. Ex) ka 01 01(CR)(LF)a 01 OK01x(CR)(LF) EErrrroorr AAcckknnoowwlleeddggeemmeenntt
[[CCoommmmaanndd22]][[ ]][[SSeett IIDD]][[ ]][[NNGG]][[DDaattaa]][[xx]]
[Data] : use the small character, if data is 0xab, it The TV transmits ACK (acknowledgement) based on this format when receiving abnormal data from non-viable func-
tions or communication errors. Data1: Illegal Code Data2: Not supported function Data3: Wait more time
*in this model, TV will not send the status during the standby mode.
*data format
[command 2] : use as command.
[Set ID] : use the small character, if set ID is 10, it will send the 0,a will send the a, b
[NG] : use the large character
*in this model, TV will send the echo, CR, LF with ack message. When it send the power on ack message, it will be like below. Ex) ka 01 01(CR)(LF)a 01 NG01x(CR)(LF) A P P E N D I X 94 0011.. PPoowweerr ((CCoommmmaanndd22::aa)) To control Power On/Off of the TV. Transmission [k][a][ ][Set ID][ ][Data][Cr]
Data 0 : Power Off Data 1 : Power On Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x]
* In a like manner, if other functions transmit FF data based on this format, Acknowledgement data feedback presents status about each function.
* Note: In this model, TV will send the Acknowledge after power on processing completion. There might be a time delay between command and acknowledge. 0022.. IInnppuutt SSeelleecctt ((CCoommmmaanndd22::bb)) ((MMaaiinn PPiiccttuurree IInnppuutt)) To select input source for the TV. 0055.. VVoolluummee MMuuttee ((CCoommmmaanndd22::ee)) To control volume mute on/off. You can also adjust mute using the MUTE button on remote control. Transmission [k][e][ ][Set ID][ ][Data][Cr]
Data 0 : Volume mute on (Volume off) Data 1 : Volume mute off (Volume on) Acknowledgement [e][ ][Set ID][ ][OK/NG][Data][x]
0066.. VVoolluummee CCoonnttrrooll ((CCoommmmaanndd22::ff)) To adjust volume. You can also adjust volume with the volume buttons on remote control. Transmission [k][f][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64 Refer to Real data mapping 1 as shown below. Transmission [k][b][ ][Set ID][ ][Data][Cr]
Acknowledgement [f][ ][Set ID][ ][OK/NG][Data][x]
Data 0: DTV Data 2: AV1 Data 1: Analog Data 3: AV2 Data 4: Component 1 Data 5: Component 2 Data 6: RGB-PC Data 8: HDMI2 Data 7: HDMI1 Data 9: HDMI3 Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]
0077.. CCoonnttrraasstt ((CCoommmmaanndd22::gg)) To adjust screen contrast. You can also adjust contrast in the Picture menu. Transmission [k][g][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
*Refer to Real data mapping 1 as shown below. 0033.. AAssppeecctt RRaattiioo ((CCoommmmaanndd22::cc)) ((MMaaiinn ppiiccttuurree ffoorrmmaatt)) Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x]
To adjust the screen format. You can also adjust the screen format using the RATIO button on remote control or in the Picture menu. Transmission [k][c][ ][Set ID][ ][Data][Cr]
Data 1: 4:3 2: 16:9 4: Zoom 1 5: Zoom 2 6: Set by program Reserved Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]
0044.. SSccrreeeenn MMuuttee ((CCoommmmaanndd22::dd)) To select screen mute on/off. Transmission [k][d][ ][Set ID][ ][Data][Cr]
Data 0 : Screen mute off (Picture on) Data 1 : Screen mute on (Picture off) Acknowledgement [d][ ][Set ID][ ][OK/NG][Data][x]
0088.. BBrriigghhttnneessss ((CCoommmmaanndd22::hh)) To adjust screen brightness. You can also adjust brightness in the Picture menu. Transmission [k][h][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64(*transmit by Hexadecimal code)
*Refer to Real data mapping 1 as shown below. Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x]
A P P E N D I X
*Real data mapping 1 0 : Step 0 A : Step 10 (SET ID 10) F : Step 15 (SET ID 15) 10 : Step 16 (SET ID 16) 63 : Step 99 (SET ID 99) 64 : Step 100 95 APPENDIX 0099.. CCoolloorr ((CCoommmmaanndd22::ii)) To adjust the screen color.
*Refer to Real data mapping 1. See page 95. Acknowledgement [r][ ][Set ID][ ][OK/NG][Data][x]
You can also adjust color in the Picture menu. Transmission [k][i][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
*Refer to Real data mapping 1. See page 95. Acknowledgement [i][ ][Set ID][ ][OK/NG][Data][x]
1100.. TTiinntt ((CCoommmmaanndd22::jj)) To adjust the screen tint. You can also adjust tint in the Picture menu. Transmission [k][j][ ][Set ID][ ][Data][Cr]
Data Red : 0 ~ Green : 64
*Refer to Real data mapping 1. See page 95. Acknowledgement [ j ][ ][Set ID][ ][OK/NG][Data][x]
1111.. SShhaarrppnneessss ((CCoommmmaanndd22::kk)) To adjust the screen sharpness. You can also adjust sharpness in the Picture menu. Transmission [k][k][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64
*Refer to Real data mapping 1. See page 95. Acknowledgement [k][ ][Set ID][ ][OK/NG][Data][x]
1122.. OOSSDD SSeelleecctt ((CCoommmmaanndd22::ll)) To select OSD (On Screen Display) on/off. Transmission [k][l][ ][Set ID][ ][Data][Cr]
Data 0: OSD off Data 1: OSD on 1155.. BBaassss ((CCoommmmaanndd22::ss)) To adjust bass. You can also adjust bass in the Audio menu. Transmission [k][s][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64(*transmit by Hexadecimal code)
*Refer to Real data mapping 1. See page 95. Acknowledgement [s][ ][Set ID][ ][OK/NG][Data][x]
1166.. BBaallaannccee ((CCoommmmaanndd22::tt)) To adjust balance. You can also adjust balance in the Audio menu. Transmission [k][t][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64(*transmit by Hexadecimal code)
*Refer to Real data mapping 1. See page 95. Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x]
1177.. CCoolloorr TTeemmppeerraattuurree ((CCoommmmaanndd22::uu)) To adjust color temperature. You can also adjust color temperature in the Picture menu. Transmission [k][u][ ][Set ID][ ][Data][Cr]
Data 0: Medium 1: Cool 2: Warm 3: User Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]
1188.. RReedd aaddjjuussttmmeenntt((CCoommmmaanndd::vv)) Acknowledgement [l][ ][Set ID][ ][OK/NG][Data][x]
To adjust red in color temperature 1133.. RReemmoottee CCoonnttrrooll LLoocckk MMooddee ((CCoommmmaanndd22::mm)) To lock the remote control and the front panel controls on the set. Transmission [k][m][ ][Set ID][ ][Data][Cr]
Data 0: Lock off Data 1: Lock on Transmission [k][v][ ][Set ID][ ][Data][Cr]
Data Min:0 ~ Max:C8
*Refer to "Real data mapping 2". See page 97. Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x]
1199.. GGrreeeenn aaddjjuussttmmeenntt((CCoommmmaanndd::ww)) Acknowledgement [m][ ][Set ID][ ][OK/NG][Data][x]
To adjust green in color temperature. If youre not using the remote control and front panel controls on the TV, use this mode. When main power is on/off, remote control lock is released. 1144 TTrreebbllee ((CCoommmmaanndd22::rr)) To adjust treble. You can also adjust treble in the Audio menu. Transmission [k][r][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64(*transmit by Hexadecimal code) Transmission [k][w][ ][Set ID][][Data][Cr]
Max:C8
*Refer to "Real data mapping 2". See page 97. Acknowledgement [w][ ][Set ID][ ][OK/NG][Data][x]
A P P E N D I X 96 2200.. BBlluuee aaddjjuussttmmeenntt((CCoommmmaanndd::$$)) To adjust blue in color temperature. Transmission [k][$][ ][Set ID][][Data][Cr]
Data Min:0 ~ Max:C8
*Refer to Real data mapping 2 as shown below. Acknowledgement [$][ ][Set ID][][OK/NG][Data][x]]
*Real data mapping 2 0 : -20 5 : -19 A : -18 5F: -1 64: 0 69: +1 C3 : +19 C8 : +20 2211.. TTuunnee CCoommmmaanndd ((CCoommmmaanndd:: mm aa)) To tune channel to following physical/major/minor num ber. Transmission [m][a][ ][Set ID][ ][Data0][ ][Data1]
[ ][Data2][ ][Data3][ ][Data4][ ][Data5][Cr]
Data 0: Physical Channel Number(Transmit by Hexadecimal code) NTSC air:02~45 NTSC cable: 01, 0E~7D ATSC air:01~45 ATSC cable:01~87 Data1,Data2: Major Channel Number (two part) /
Channel Number (One part) Data1: High byte Data2: Low byte Two part channel number:
Major number-Minor number One part channel number:
If the channel band is ATSC digital cable, it can be used. In case of using one part channel num-
ber, minor channel does not need. Data3, Data 4: Minor Channel Number Data3: High byte , Data4: Low byte A P P E N D I X 97 APPENDIX Data5:
7 0 1 Main/Sub Picture Main Sub 6 0 1 Two/One Part Channel Two One 5 0 1 Using Physical Channel 4 Reserved Use No Use x x x x x x x x x x 3 0 0 0 0 0 0 0 0 x 1 2 0 0 0 0 1 1 1 1 x 1 1 0 0 1 1 0 0 1 1 x 1 0 0 1 0 1 0 1 0 1 x 1 Step NTSC Air NTSC Cable ATSC Air ATSC Cable_std ATSC Cable_hrc ATSC Cable_irc ATSC cable_auto Reserved
... Reserved All data are transmitted by Hexadecimal code
* Two/One part Channel: 6th bit This bit is used in a cable-ready system.
* Using physical channel: 5th bit If the channel band is NTSC air or NTSC cable, channel tuning can be done by only physical channel. In this case, using physical channel bit must be low(0). But if the channel band is ATSC air or ATSC cable, there are two cases that physical channel enable or disable. If the physical channel sending is meaningful, you should set this bit low(0). If the physical channel sending is meaningless, you should set this bit high(1). Example) 2222.. CChhaannnneell AAdddd//DDeell ((CCoommmmaanndd:: mm bb)) To add and delete the channels Transmission [m][b][ ][Set ID][ ][Data][Cr]
Data 0: Channel Delete Data 1: Channel Add Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]
2233.. KKeeyy ((CCoommmmaanndd:: mm cc)) To send IR remote key code. Transmission [m][c][ ][Set ID][ ][Data][Cr]s Data Key code: Refer to page 90. Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]
1. Analog channel: NTSC cable, channel number(35), 2244.. IInnppuutt sseelleecctt((CCoommmmaanndd:: xx bb)) ((MMaaiinn PPiiccttuurree IInnppuutt)) main picture Command: ma 00 23 xx xx xx xx 01 attribute(0x01): main picture, two part(its not mandatory), using physical channel, NTSC cable xx data: dont care major and minor channel number in case analog channel tuning. 2. Digital channel: ATSC air, channel number(dont know physical channel, major(30), minor(3)), sub picture Command: ma 00 xx 00 1E 00 03 A2 attribute(0xA2): sub picture, two part, not using physical channel, ATSC air xx data: dont care analog channel number in case digital channel tuning. 3. Digital channel: ATSC air, channel number(physi-
cal(20),major(20), minor(3)), sub picture Command:
ma 00 14 00 14 00 03 82 attribute(0x82): sub picture, two part, using physical channel, ATSC air. Acknowledgement[a][ ][Set ID][ ][OK][Data0][Data1]
[Data2][Data3][Data4][x][a][ ][Set ID]
[ ][NG][Data0][x]
To select input source for TV. Transmission [x][b][ ][Set ID][][Data][Cr]
Data 00 : DTV (Antenna) Data 01 : DTV (Cable) Data 10 : Analog (Antenna) Data 11 : Analog (Cable) Data 20 : AV1 Data 21 : AV2 Data 40 : Component 1 Data 41 : Component 2 Data 60 : RGB-PC Data 91 : HDMI2 Data 90 : HDMI1 Data 92 : HDMI3 Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]
2255.. BBaacckk lliigghhtt((CCoommmmaanndd:: mm gg)) To adjust screen back light. Transmission [m][g][ ][Set ID][ ][Data][Cr]
Data Min:0 ~ Max:64 Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x]
A P P E N D I X 98
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2007-08-13 | JBP - Part 15 Class B Computing Device Peripheral | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2007-08-13
|
||||
1 | Applicant's complete, legal business name |
LG Electronics USA
|
||||
1 | FCC Registration Number (FRN) |
0023476120
|
||||
1 | Physical Address |
1000 Sylvan Avenue
|
||||
1 |
Englewood Cliffs, New Jersey 07632
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
T******@TIMCOENGR.COM
|
||||
1 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
BEJ
|
||||
1 | Equipment Product Code |
47LB9DFUA
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
K**** H******
|
||||
1 | Title |
Director, Standards & Compliance
|
||||
1 | Telephone Number |
201-4********
|
||||
1 | Fax Number |
201-8********
|
||||
1 |
k******@lge.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | JBP - Part 15 Class B Computing Device Peripheral | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | LCD TV MONITOR | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
GUMI UNIVERSITY EMC CENTER
|
||||
1 | Name |
T****** P********
|
||||
1 | Telephone Number |
82-54********
|
||||
1 | Fax Number |
82-54********
|
||||
1 |
t******@gumi.ac.kr
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15B |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC