all | frequencies |
|
|
exhibits | applications |
---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual 1 | Users Manual | 1.10 MiB | ||||
1 |
|
User Manual 2 | Users Manual | 3.99 MiB | ||||
1 | Cover Letter(s) | |||||||
1 | Block Diagram | |||||||
1 | External Photos | |||||||
1 | Internal Photos | |||||||
1 | ID Label/Location Info | |||||||
1 | Operational Description | |||||||
1 | Test Report | |||||||
1 | Schematics | |||||||
1 | Test Setup Photos |
1 | User Manual 1 | Users Manual | 1.10 MiB |
Regulatory Information cont. FCC Compliance Statement respecte toutes les exigences du Rglement sur le matriel brouilleur du Canada. This equipment has been tested and found to comply within the limits of a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception (which can be determined by turning the equipment on and off), the user is encouraged to try to correct the interference by using one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's (or your) authority to operate the equipment. Only peripherals (digital input/output devices, terminals, printers, etc.) certified to comply with the Class B limits may be attached to this monitor. Operation with non-certified peripherals is likely to result in interference to radio and TV reception. Only shielded signal cables may be used with this System. NOTICE The regulations are applied only to the products with the ID LABEL indicating specific requirements. Canadian DOC Notice This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numrique de la classe B NOTICE The regulations are applied only to the products with the ID LABEL indicating specific requirements. NOTICE The following information is for the models certified by TCO. If you want to know the specification of the purchased product, see the label attached on the back of the product. TCO Displays 5.0 Congratulations, Your display is designed for both you and the planet!
This display carries the TCO Certified label. This ensures that the display is designed for minimal impact on the climate and natural environment, while offering all the performance expected from top of the line electronic products. TCO Certified is a third party verified program, where every product model is tested by an accredited independent test laboratory. TCO Certified represents one of the toughest certifications for displays worldwide. Some of the Usability features of the TCO Displays 5.0 requirements:
Visual Ergonomics Good visual ergonomics in order to improve the working environment for the user and to reduce sight and strain problems. Important parameters are:
Light levels without color tint, Uniform color and luminance, Wide color gamut Calibrated color temperature and gamma curve Wide luminance level, Dark black levels, Low motion blur Electrical Safety Product fulfills rigorous safety standards 1 Regulatory Information cont. Emissions Low alternating electric and magnetic fields emissions Low acoustic noise emissions Some of the environmental features of the TCO Displays 5.0 requirements:
The brand owner demonstrates corporate social responsibility and has a certified environmental management system (EMAS or ISO 14001) Very low energy consumption both in on-and standby mode Restrictions on chlorinated and brominated flame retardants, plasticizers and polymers Restrictions on heavy metals such as cadmium, mercury and lead (RoHS compliance) Both product and product packaging is prepared for recycling The brand owner offers take-back options The requirements included in this label have been developed by TCO Development in co-operation with scientists, experts, users as well as manufacturers all over the world. Since the end of the 1980s TCO has been involved in influencing the development of IT equipment in a more user-friendly direction. Our labeling system started with displays in 1992 and is now requested by users and IT-manufacturers all over the world. For more information, please visit:
www.tcodevelopment.com English Information for Environmental Preservation LGE. announced the 'LG Declaration for a Cleaner Environment' in 1994, and this ideal has served as a guiding managerial principle ever since. The Declaration is a foundation that has allowed us to undertake environmentally friendly activities in careful consideration of economic, environmental, and social aspects. We promote activities for environmental preservation, and we specifically develop our products to embrace the concept of environment-friendly. We minimize the hazardous materials contained in our products. For example, there is no cadmium to be found in our monitors. Information for recycling This monitor may contain parts which could be hazardous to the environment. It is important that this monitor be recycled after use. LGE. handles all waste monitors through an environmentally acceptable recycling method. There are several take-back and recycling systems currently in operation worldwide. Many parts will be reused and recycled, while harmful substances and heavy metals are treated by an environmentally friendly method. If you want to find out more information about our recycling program, please contact your local LG vendor or a corporate representative of LG. We set our vision and policies on a cleaner world by selecting the issue of the global environment as a task for corporate improvement. Please visit our website for more information about our green policies. http://www.lg.com/global/sustainability/environment/take-back-
recycling.jsp 2 Regulatory Information cont. Deutsch Franais Informationen zur Erhaltung der Umwelt Im Jahr 1994 verkndete LGE die 'LG Declaration for a Cleaner Environment' (LG Erklrung fr eine sauberere Umwelt). Seitdem dient dieses Ideal als fhrendes Prinzip des Unternehmens. Diese Erklrung war die Basis fr die Durchfhrung von umweltfreundlichen Aktivitten, wobei wirtschaftliche, umweltbezogene und soziale Aspekte in die berlegungen mit einbezogen wurden. Wir frdern Aktivitten zum Schutz der Umwelt und die Entwicklung unserer Produkte ist darauf ausgerichtet, unserem Konzept bezglich Umweltfreundlichkeit gerecht zu werden. Wir sind darauf bedacht, den Anteil der in unseren Produkten enthaltenen schdlichen Materialien zu minimieren. So ist in unseren Monitoren beispielsweise kein Kadmium zu finden. Informationen zum Thema Recycling Dieser Monitor enthlt Teile, die umweltschdlich sein knnen. Es ist unbedingt erforderlich, dass der Monitor recycelt wird, nachdem er auer Dienst gestellt wurde. Bei LGE. werden alle ausrangierten Monitore in einem unter umweltbezogenen Aspekten geeigneten Verfahren recycelt. Augenblicklich sind weltweit mehrere Rcknahme- und Recyclingsysteme im Einsatz. Viele Teile werden wieder verwendet und recycelt. Schdliche Substanzen und Schwermetalle werden durch umweltvertrgliche Verfahren behandelt. Falls Sie mehr ber unser Recyclingprogramm erfahren mchten, wenden Sie sich bitte an Ihren lokalen LG-
Hndler oder einen Unternehmensvertreter von LG. Wir richten unsere Firmenpolitik auf eine sauberere Umwelt hin aus, indem wir umweltspezifische Aspekte als wichtigen Punkt in die Weiterentwicklung unseres Unternehmens einflieen lassen. Zustzliche Informationen ber unsere grne Firmenpolitik erhalten Sie auf unserer Website. http://www.lg.com/global/sustainability/environment/take-back-
recycling.jsp Information sur la protection delenvironnement LGE. a publi sa 'Dclaration en faveur dun environnement plus propre' en 1994 et celle-ci est reste, depuis lors, un principe directeur de notre entreprise. Cette dclaration a servi de base notre rflexion et nous a permis de prendre en compte la fois les aspects conomiques et sociaux de nos activits, tout en respectant lenvironnement. Nous encourageons les activits en faveur de la prservation de lenvironnement et cest dans cet esprit que nous dveloppons nos produits : nous rduisons au minimum les matires dangereuses qui entrent dans leur composition et lon ne trouve pas de cadmium, par exemple, dans nos moniteurs. Information sur le recyclage Ce moniteur peut contenir des composants qui prsentent un risque pour lenvironnement. Il est donc important que celui-ci soit recycl aprs usage. LGE. traite les moniteurs en fin de cycle conformment une mthode de recyclage respectueuse de lenvironnement. Nous reprenons nos produits et les recyclons dans plusieurs sites rpartis dans le monde entier. De nombreux composants sont rutiliss et recycls, et les matires dangereuses, ainsi que les mtaux lourds, sont traits selon un procd cologique. Si vous souhaitez plus de renseignements sur notre programme de recyclage, veuillez contacter votre revendeur LG ou un lun de nos reprsentants. Nous voulons agir pour un monde plus propre et croyons au rle de notre entreprise dans lamlioration de lenvironnement. Pour plus de renseignements sur notre politique verte, rendez visite notre site :
http://www.lg.com/global/sustainability/environment/take-back-
recycling.jsp 3 Regulatory Information cont. Italiano Espaol Informazioni per la tutela dellambiente La LGE. ha annunciato nel 1994 la cosiddetta 'LG Declaration for a Cleaner Environment' (Dichiarazione di LG a favore di un ambiente pi pulito), un ideale che da allora funge da principio ispiratore della gestione aziendale. La dichiarazione rappresenta il fondamento che consente di intraprendere attivit a favore dell'ambiente tenendo conto degli aspetti economici, ambientali e sociali.Noi della LG, promuoviamo attivit a favore della tutela dell'ambiente sviluppando appositamente i nostri prodotti per cogliere il concetto del rispetto dellambiente riducendo i materiali dannosi presenti nei nostri prodotti. Ad esempio nei nostri monitor non presente il cadmio. Informazioni per il riciclaggio Il monitor pu presentare componenti che potrebbero risultare eventualmente dannosi per l'ambiente. importante che il monitor sia riciclato al termine del suo utilizzo. La LGE. gestisce tutti i monitor di rifiuto con un metodo di riciclaggio soddisfacente dal punto di vista ambientale. In tutto il mondo sono attualmente in funzione numerosi sistemi di riciclaggio e recupero. I diversi componenti sono riutilizzati e riciclati, mentre le sostanze dannose e i metalli pesanti vengono trattati con un metodo rispettoso dellambiente. Se si desiderano maggiori informazioni in merito al programma di riciclaggio, consigliabile rivolgersi al proprio rivenditore LG o ad un rappresentante aziendale della LG. Noi della LG impostiamo la nostra visione e le nostre politiche a favore di un mondo pi pulito ponendo la questione dell'ambiente dal punto di vista globale come una mansione rivolta al miglioramento della nostra azienda. Vi invitiamo a visitare il nostro sito internet per ulteriori informazioni sulla nostra politica verde. http://www.lg.com/global/sustainability/environment/take-back-
recycling.jsp Informacin para la conservacin medioambiental LGE. present la 'Declaracin para un entorno ms limpio de LG' en 1994 y este ideal ha servido para guiar nuestros principios empresariales desde entonces. La Declaracin es la base que nos ha permitido llevar a cabo tareas que respetan el medio ambiente siempre teniendo en cuenta aspectos sociales, econmicos y medioambientales. Promocionamos actividades orientadas a la conservacin del medio ambiente y desarrollamos nuestros productos especficamente para que se ajusten a la filosofa que protege el entorno. Reducimos al mximo el uso de materiales de riesgo en nuestros productos. Un ejemplo de ello es la ausencia total de cadmio en nuestros monitores. Informacin para el reciclaje Este monitor puede contener piezas que entraen riesgos medioambientales. Es importante reciclar este monitor despus de su utilizacin. LGE. trata todos los monitores usados siguiendo un mtodo de reciclaje que no daa al entorno. Contamos con diversos sistemas de recuperacin y reciclaje que funcionan a nivel mundial en la actualidad. Es posible reciclar y reutilizar muchas de las piezas, mientras que las sustancias dainas y los metales pesados se tratan siguiendo un mtodo que no perjudique al medio ambiente. Si desea obtener ms informacin acerca del programa de reciclaje, pngase en contacto con su proveedor local de LG o con un representante empresarial de nuestra marca. Basamos nuestra visin y nuestras polticas en un mundo ms limpio y para ellos optamos por un entorno global como tarea principal de nuestra evolucin como empresa. Visite nuestra pgina Web para obtener ms informacin sobre nuestras polticas ecolgicas. http://www.lg.com/global/sustainability/environment/take-back-
recycling.jsp 4 Regulatory Information cont. Portugus Nederlands Informaes relacionadas preservao ambiental A LGE. anunciou a 'LG Declaration for a Cleaner Environment' (Declarao da LG para um ambiente mais limpo) em 1994 e esse ideal tem servido desde ento como um princpio administrativo de orientao. A Declarao a base que nos tem permitido realizar atividades favorveis ao ambiente com considerao atenta aos aspectos econmicos, ambientais e sociais. Promovemos atividades de preservao ambiental e desenvolvemos nossos produtos para englobar especificamente o conceito de favorvel ao ambiente. Reduzimos os materiais perigosos contidos em nossos produtos. Por exemplo, no h cdmio em nossos monitores. Informaes relacionadas reciclagem Este monitor pode conter peas que podem representar riscos ao ambiente. importante que ele seja reciclado aps o uso. A LGE. cuida de todos os monitores descartados atravs de um mtodo de reciclagem agradvel ao ambiente. H vrios sistemas de devoluo e reciclagem atualmente em operao no mundo. Muitas peas sero reutilizadas e recicladas e as substncias nocivas e os metais pesados passaro por tratamento atravs de um mtodo favorvel ao ambiente. Para obter mais informaes sobre nosso programa de reciclagem, entre em contato com seu fornecedor LG local ou com um representante corporativo da LG. Definimos nossa viso e nossas polticas relacionadas a um mundo mais limpo selecionando a questo do ambiente global como uma tarefa de aprimoramento corporativo. Visite nosso site para obter mais informaes sobre nossas polticas de meio ambiente. http://www.lg.com/global/sustainability/environment/take-back-
recycling.jsp Informatie met betrekking tot het behoud van het milieu LGE. publiceerde in 1994 de 'LG Declaration for a Cleaner Environment' (de LG-verklaring met betrekking tot een schoner milieu). Deze verklaring en het ideaal van een schoner milieu fungeren sindsdien als een bestuurlijke leidraad voor onze onderneming. Op basis van deze verklaring ontplooien wij milieuvriendelijke activiteiten, waarbij er zowel met sociale en economische aspecten, als met milieuaspecten zorgvuldig rekening wordt gehouden. Wij ondersteunen activiteiten die zijn gericht op het behoud van het milieu en wij houden bij het ontwikkelen onze producten specifiek rekening met de milieuvriendelijkheid van onze producten. Wij minimaliseren het gebruik van schadelijke stoffen in onze producten. Er wordt bijvoorbeeld geen cadmium verwerkt in onze monitors. Informatie met betrekking tot recycling Deze monitor bevat materialen die schadelijk zouden kunnen zijn voor het milieu. Het is belangrijk dat deze monitor aan het einde van zijn levensduur wordt gerecycled. LGE. verwerkt alle afvalmonitors via een milieuvriendelijke recyclingmethode. Hiervoor worden er momenteel wereldwijd verscheidene inname- en recyclingsystemen gehanteerd. Een groot aantal onderdelen wordt opnieuw gebruikt en gerecycled, waarbij schadelijke stoffen en zware metalen volgens een milieuvriendelijke methode worden verwerkt. Voor meer informatie over ons recyclingprogramma kunt u contact opnemen met uw plaatselijke LG-
vertegenwoordiger of een LG-vestiging. Onze visie en ons beleid met betrekking tot een schonere wereld vloeien voort uit het feit dat wij het milieu hebben aangemerkt als een onderwerp dat speciale aandacht verdient binnen onze onderneming. Bezoek onze website voor meer informatie over ons 'groene' beleid. http://www.lg.com/global/sustainability/environment/take-back-
recycling.jsp 5 Regulatory Information cont. Russian 1994 LGE
' LG ',
. K LGE
. LG.
http://www.lg.com/global/sustainability/environment/take-back-
recycling.jsp 6 LG 1994 LG
. LG
. LG
. LG LG LG
. http://www.lg.com/global/sustainability/environment/take-back-
recycling.jsp Regulatory Information cont. NOM MARK (Mexico only) Italian Smaltimento delle apparecchiature obsolete 1.Quando su un prodotto riportato il simbolo di un bidone della spazzatura barrato da una croce significa che il prodotto coperto dalla direttiva europea 2002/96/EC. 2.Tutti i prodotti elettrici ed elettronici dovrebbero essere smaltiti separatamente rispetto alla raccolta differenziata municipale, mediante impianti di raccolta specifici designati dal governo o dalle autorit locali. 3.Il corretto smaltimento delle apparecchiature obsolete contribuisce a prevenire possibili conseguenze negative sulla salute umana e sull'ambiente. 4.Per informazioni pi dettagliate sullo smaltimento delle apparecchiature obsolete, contattare il comune, il servizio di smaltimento rifiuti o il negozio in cui stato acquistato il prodotto. Swedish Kassering av din gamla apparat 1.Nr den hr symbolen med en verkryssad soptunna p hjul sitter p en produkt innebr det att den regleras av European Directive 2002/96/EC. 2.Alla elektriska och elektroniska produkter br kasseras via andra vgar n de som finns fr hushllsavfall, helst via fr ndamlet avsedda uppsamlingsanlggningar som myndigheterna utser. 3.Om du kasserar din gamla apparat p rtt stt s bidrar du till att frhindra negativa konsekvenser fr miljn och mnniskors hlsa. 4.Mer detaljerad information om kassering av din gamla apparat kan fr av kommunen, renhllningsverket eller den butik dr du kpte produkten. Dutch Uw oude toestel wegdoen 1.Als het symbool met de doorgekruiste verrijdbare afvalbak op een product staat, betekent dit dat het product valt onder de Europese Richtlijn 2002/96/EC. 2.Elektrische en elektronische producten mogen niet worden meegegeven met het huishoudelijk afval, maar moeten worden ingeleverd bij speciale inzamelingspunten die door de lokale of landelijke overheid zijn aangewezen. WEEE (for Europe ) English Disposal of your old appliance 1.When this crossed-out wheeled bin symbol is attached 1.When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the to a product it means the product is covered by the European Directive 2002/96/EC. European Directive 2002/96/EC. 2.All electrical and electronic products should be 2.All electrical and electronic products should be disposed of separately from the municipal waste disposed of separately from the municipal waste stream via designated collection facilities appointed by stream via designated collection facilities appointed by the government or the local authorities. the government or the local authorities. 3.The correct disposal of your old appliance will help 3.The correct disposal of your old appliance will help prevent potential negative consequences for the prevent potential negative consequences for the environment and human health. environment and human health. 4.For more detailed information about disposal of your 4.For more detailed information about disposal of your old appliance, please contact your city office, waste old appliance, please contact your city office, waste disposal service or the shop where you purchased the disposal service or the shop where you purchased the product. product. French limination de votre ancien appareil 1.Ce symbole, reprsentant une poubelle sur 1.Ce symbole, reprsentant une poubelle sur roulettes barre d'une croix, signifie que le roulettes barre d'une croix, signifie que le produit est couvert par la directive europenne produit est couvert par la directive europenne 2002/96/EC. 2002/96/EC. 2.Les lments lectriques et lectroniques 2.Les lments lectriques et lectroniques doivent tre jets sparment, dans les vide-
doivent tre jets sparment, dans les vide-
ordures prvus cet effet par votre municipalit. ordures prvus cet effet par votre municipalit. 3.Une limination conforme aux instructions aidera 3.Une limination conforme aux instructions aidera rduire les consquences ngatives et risques rduire les consquences ngatives et risques ventuels pour l'environnement et la sant ventuels pour l'environnement et la sant humaine. humaine. 4.Pour plus d'information concernant l'limination 4.Pour plus d'information concernant l'limination de votre ancien appareil, veuillez contacter votre de votre ancien appareil, veuillez contacter votre mairie, le service des ordures mnagres ou mairie, le service des ordures mnagres ou encore la magasin o vous avez achet ce encore la magasin o vous avez achet ce produit. produit. 7 Regulatory Information cont. 3.De correcte verwijdering van uw oude toestel helpt negatieve gevolgen voor het milieu en de menselijke gezondheid voorkomen. 4.Wilt u meer informatie over de verwijdering van uw oude toestel? Neem dan contact op met uw gemeente, de afvalophaaldienst of de winkel waar u het product hebt gekocht. Finnish Vanhojen laitteiden hvittminen 1.Tm merkki tuotteessa tarkoittaa, ett tuote kuuluu shk- ja elektroniikkalaiteromusta annetun EU-direktiivin 2002/96/EY soveltamisalaan. 2.Kaikki elektroniset laitteet ovat ongelmajtett, joten ne on toimitettava paikalliseen keryspisteeseen. 3.Vanhan laitteen asianmukainen hvittminen ehkisee mahdollisia ympristn ja terveyteen kohdistuvia haittavaikutuksia. 4.Listietoa vanhan laitteen hvittmisest saat ottamalla yhteyden paikallisiin viranomaisiin, kierrtyskeskukseen tai myymln, josta ostit laitteen. German Entsorgung von Altgerten 1.Wenn dieses Symbol eines durchgestrichenen Abfalleimers auf einem Produkt angebracht ist, unterliegt dieses Produkt der europischen Richtlinie 2002/96/EC. 2.Alle Elektro- und Elektronik-Altgerte mssen getrennt vom Hausmll ber dafr staatlich vorgesehenen Stellen entsorgt werden. 3.Mit der ordnungsgemen Entsorgung des alten Gerts vermeiden Sie Umweltschden und eine Gefhrdung der persnlichen Gesundheit. 4.Weitere Informationen zur Entsorgung des alten Gerts erhalten Sie bei der Stadtverwaltung, beim Entsorgungsamt oder in dem Geschft, wo Sie das Produkt erworben haben. Danish Sdan smider du dit gamle apparat ud 1.Nr der er et tegn med et kryds over en skraldespand, betyder det, at produktet er omfattet af EU-direktiv 2002/96/EC. 2.Alle elektriske og elektroniske produkter skal smides ud et andet sted end gennem den kommunale affaldsordning ved hjlp af specielle indsamlingsfaciliteter, der er organiseret af staten eller de lokale myndigheder. 3.Korrekt bortskaffelse af dit gamle apparat er med til at forhindre mulige skadevirkninger p miljet og menneskelig sundhed. 4.Mere detaljerede oplysninger om bortskaffelse af dit gamle apparat kan fs ved at kontakte dit lokale kommunekontor, renovationsselskab eller den butik, hvor du kbte produktet. Greek 1.
, E O 2002/96/EOK. 2.H
. 3.H
. 4.
. Spanish Cmo deshacerse de aparatos elctricos y electrnicos viejos 1.Si en un producto aparece el smbolo de un contenedor de basura tachado, significa que ste se acoge a la Directiva 2002/96/CE. 2.Todos los aparatos elctricos o electrnicos se deben desechar de forma distinta del servicio municipal de recogida de basura, a travs de puntos de recogida designados por el gobierno o las autoridades locales. 3.La correcta recogida y tratamiento de los dispositivos inservibles contribuye a evitar riesgos potenciales para el medio ambiente y la salud pblica. 4.Para obtener ms informacin sobre cmo deshacerse de sus aparatos elctricos y electrnicos viejos, pngase en contacto con su ayuntamiento, el servicio de recogida de basuras o el establecimiento donde adquiri el producto. 8 Regulatory Information cont. Portuguese Hungarian Slovak Czech Croatian Polish 9 Regulatory Information cont. Estonian Latvian Lithuanian Turkish Eski cihaznzn atlmas 1. Bu arp iaretli tekerlekli p tenekesi sembol rnn 2002/96/EC Avrupa Ynergesi kapsamnda olduunu gsterir. 2. Tm elektrikli ve elektronik rnler hkmetin ya da mahalli yetkililerin gsterdii toplama tesislerine atlmaldr. 3. Eski cihaznzn uygun biimde atlmas evreye ve insan salna zararl potansiyel negatif sonular nler. 4. Eski cihaznzn atlmasyla ilgili daha detayl bilgi almak iin ltfen mahalli yetkililerle, kat atk servisiyle ya da rn aldnz maaza ile irtibata geiniz. 5. EEE Ynetmeliine uygundur. Green Mark (for Japan) 10 Regulatory Information cont.
(for only EU) ENGLISH EU Conformity Notice LG hereby declares that this/these product(s) is/are in compliance with the essential requirements and other relevant provisions of Directive 2004/108/EC, 2006/95/EC, 2009/125/EC and (for products having a wireless function*) 1999/5/EC. European representative :
LG Electronics Service Europe B.V. Veluwezoom 15, 1327 AE Almere. The Netherlands
(Tel : +31-(0)36-547-8888)
*NOTE : Please refer to the preparation sheets. DEUTSCH EU-Konformittserklrung LG erklrt hiermit, dass dieses Produkt bzw. diese Produkte den grundlegenden Anforderungen und anderen relevanten Bestimmungen der Richtlinien 2004/108/EC, 2006/95/EC, 2009/125/EC und (fr kabellose Produkte*) 1999/5/EC entspricht bzw. entsprechen. Vertreter fr Europa:
LG Electronics Service Europe B.V. Veluwezoom 15, 1327 AE Almere. The Netherlands
(Tel. : +31-(0)36-547-8888)
*HINWEIS: Beachten Sie die Seiten zur Vorbereitung. FRANAIS Notice de conformit UE LG atteste que le ou les prsents produits sont en conformit avec les exigences essentielles et autres dispositions pertinentes de la Directive 2004/108/EC, 2006/95/EC, 2009/125/EC et (pour les produits quips de fonctions sans fi l*) 1999/5/EC. Reprsentant en Europe :
LG Electronics Service Europe B.V. Veluwezoom 15, 1327 AE Almere. Pays-Bas
(Tl : +31-(0)36-547-8888)
*REMARQUE : Reportez-vous aux fi ches de prparation. ITALIANO Avviso di conformit EU LG dichiara che questi prodotti sono conformi ai requisiti essenziali e con le altre disposizioni rela-
tive alle direttive 2004/108/CE, 2006/95/CE, 2009/125/CE e (per i prodotti con funzione wireless*) 1999/5/CE. Rappresentante europeo:
LG Electronics Service Europe B.V. Veluwezoom 15, 1327 AE Almere. Paesi Bassi
(Tel: +31-(0)36-547-8888)
*NOTA: consultare i documenti di preparazione. 11 Regulatory Information cont. ESPAOL Aviso de conformidad con la UE Por la presente, LG declara que estos productos cumplen con los requisitos esenciales y las dems provisiones relevantes de la directiva 2004/108/CE, 2006/95/CE, 2009/125/CE y 1999/5/CE (para productos con funcin inalmbrica*). Representante europeo:
LG Electronics Service Europe B.V. Veluwezoom 15, 1327 AE Almere. Pases Bajos
(Tel: +31-(0)36-547-8888)
*NOTA: consulte la documentacin de preparacin. PORTUGUS Aviso de conformidade da UE A LG declara por este meio que este(s) produto(s) est/esto em conformidade com os requisitos essenciais e outras disposies relevantes da Directiva 2004/108/EC, 2006/95/EC, 2009/125/EC e
(para produtos que tenham uma funo sem fios*) 1999/5/EC. Representante europeu:
LG Electronics Service Europe B.V. Veluwezoom 15, 1327 AE Almere. Holanda
(Tel.: +31-(0)36-547-8888)
*NOTA: consulte o catlogo. NEDERLANDS Conformiteitsverklaring (EU) LG verklaart hierbij dat dit/deze product(en) voldoen aan de essentile vereisten en andere relevante bepalingen van richtlijn 2004/108/EG, 2006/95/EG, 2009/125/EG en (voor producten met een draadloze functie*) 1999/5/EG. Europees hoofdkantoor:
LG Electronics Service Europe B.V. Veluwezoom 15 1327 AE Almere. Nederland
(Tel: +31-(0)36-547-8888)
*OPMERKING: raadpleeg het gedeelte Voorbereiding.
, LG 2004/108/, 2006/95/, 2009/125/ (
*) 1999/5/.
LG Electronics Service Europe B.V. Veluwezoom 15, 1327 AE Almere.
(: +31-(0)36-547-8888)
*: . 12 Regulatory Information cont. SVENSKA Meddelande om EU-regelefterlevnad LG intygar hrmed att denna/dessa produkt(er) uppfyller gllande regler och andra relevanta delar av direktiv 2004/108/EG, 2006/95/EG, 2009/125/EG och (fr produkter med trdlsa funktioner*) 1999/5/EG. Europeisk representant:
LG Electronics Service Europe B.V. Veluwezoom 15, 1327 AE Almere. Nederlnderna
(Tel: +31-(0)36-547-8888)
*Obs! Ls mer i frberedelseinformationen. NORSK Samsvarsmerknad for EU LG erklrer herved at disse produktene er i samsvar med de vesentlige kravene og andre relevan-
te bestemmelser i Direktiv 2004/108/EC, 2006/95/EC, 2009/125/EC og (for produkter med trdls funksjon*) 1999/5/EC. Europeisk representant:
LG Electronics Service Europe B.V. Veluwezoom 15, 1327 AE Almere. Nederland
(Tlf.: +31-(0)36-547-8888)
*MERK: Se forberedelsessidene. DANSK EU-overensstemmelseserklring LG erklrer hermed, at dette/disse produkt(er) overholder de vigtige krav og andre relevante bestemmelser i direktiv 2004/108/EC, 2006/95/EC, 2009/125/EC og (for produkter med trdls funktion*) 1999/5/EC. Europisk reprsentant:
LG Electronics Service Europe B.V. Veluwezoom 15, 1327 AE Almere. Holland
(Tlf.: +31-(0)36-547-8888)
*BEMRK: Se venligst installationsarkene. SUOMI EU-vaatimustenmukaisuusilmoitus LG vakuuttaa tten, ett tm tuote on / nm tuotteet ovat seuraavien direktiivien oleellisten vaa-
timusten ja muiden ehtojen mukainen: 2004/108/EY, 2006/95/EY, 2009/125/EY ja (tuotteet, joissa on langattomia toimintoja*) 1999/5/EY. Edustaja Euroopassa:
LG Electronics Service Europe B.V. Veluwezoom 15, 1327 AE Almere. Alankomaat
(Puh: +31 (0)36 547 8888)
*HUOM: Lue lis kytt edeltvist toimista. 13 Regulatory Information cont.
LIETUVI K. EB atitikties deklaracija Bendrov LG pareikia, kad is (ie) gaminys (-iai) atitinka esminius reikalavimus ir kitas atitinka-
mas nuostatas, pateiktas Direktyvose 2004/108/EB, 2006/95/EB, 2009/125/EB ir (jei gaminiai turi belaidio ryio funkcij*) 1999/5/EB. Atstovas Europoje:
LG Electronics Service Europe B.V. Veluwezoom 15, 1327 AE Almere. Nyderlandai
(Tel. +31-(0)36-547-8888)
*PASTABA: praome irti paruoimo lapus. LATVIEU Paziojums par atbilstbu ES direktvm Ar o LG pazio, ka is/ie izstrdjums(-i) atbilst vism direktvu 2004/108/EK, 2006/95/
EK, 2009/125/EK un 1999/5/EK btiskajm prasbm un citiem saistoajiem noteikumiem
(izstrdjumiem ar bezvadu sakaru funkciju*). Prstvniecba Eirop:
LG Electronics Service Europe B.V. Veluwezoom 15, 1327 AE Almere. Nderlande
(Tel.: +31-(0)36-547-8888)
*PIEZME: ldzu, skatiet sagatavoans dokumentus. EESTI E vastavuskinnitus LG kinnitab jrgnevaga, et see/need toode/tooted on vastavuses direktiivide 2004/108/EC, 2006/95/EC, 2009/125/EC ja (traadita funktsioonidega seadmed*) 1999/5/EC ja nende lisade phinuetega. Euroopa esindus:
LG Electronics Service Europe B.V. Veluwezoom 15, 1327 AE Almere. Holland
(Tel : +31-(0)36-547-8888)
*MRKUS. Palun vaadake ettevalmistuslehti. SLOVENINA Obvestilo o skladnosti s predpisi EU Podjetje LG izjavlja, da so ti izdelki skladni z bistvenimi zahtevami in drugimi ust-
reznimi doloili Direktiv 2004/108/ES, 2006/95/ES, 2009/125/ES in 1999/5/ES (za izdelke z brezino funkcijo*). Evropski zastopnik:
LG Electronics Service Europe B.V. Veluwezoom 15, 1327 AE Almere. The Netherlands
(Tel: +31-(0)36-547-8888)
*OPOMBA: oglejte si liste za pripravo. 14 Regulatory Information cont.
* POLSKI Deklaracja zgodnoci z normami UE Firma LG niniejszym zawiadcza, e niniejszy produkt spenia zasadnicze wymagania i inne odnone postanowienia dyrektyw 2004/108/WE, 2006/95/WE, 2009/125/WE oraz (w zakresie urzdze wyposaonych w funkcj cznoci bezprzewodowej*) 1999/5/WE. Przedstawiciel na Europ:
LG Electronics Service Europe B.V. Veluwezoom 15, 1327 AE Almere. The Netherlands
(Tel.: +31-(0)36-547-8888)
*UWAGA: Dokadniejsze informacje mona znale w instrukcjach przygotowania urzdzenia do pracy. MAGYAR EU Megfelelsgi nyilatkozat Az LG ezton kijelenti, hogy a termk(ek) megfelelnek a 2004/108/EK, a 2006/95/EK, a 2009/125/
EK s (vezetk nlkli funkcival rendelkez termkek esetn*) az 1999/5/EK irnyelv alapvet elrsainak s egyb vonatkoz rendelkezseinek. Eurpai kpviselet:
LG Electronics Service Europe B.V. Veluwezoom 15, 1327 AE Almere. Hollandia
(Tel: +31-(0)36-547-8888)
*MEGJEGYZS: Lsd az elksztst bemutat fejezeteket. ESKY Prohlen o shod s legislativou EU Spolenost LG tmto prohlauje, e tento vrobek (tyto vrobky) je ve shod se zkladnmi poadavky a pslunmi ustanovenmi smrnic 2004/108/ES, 2006/95/ES, 2009/125/ES a (u vrobk s bezdrtovou funkc*) 1999/5/ES. Zastoupen v Evrop:
LG Electronics Service Europe B.V. Veluwezoom 15, 1327 AE Almere. Nizozemsko
(Tel : +31-(0)36-547-8888)
*POZNMKA: Pette si prosm podklady k pprav. SLOVENSKY Vyhlsenie o zhode pre oblas E Spolonos LG tmto vyhlasuje, e tento/tieto produkt(y) je/s v slade so zkladnmi poiadavkami a inmi relevantnmi ustanoveniami Smernice 2004/108/ES, 2006/95/ES, 2009/125/
ES a (u produktov s funkciou bezdrtovho pripojenia*) 1999/5/ES. Eurpske zastupitestvo:
LG Electronics Service Europe B.V. Veluwezoom 15, 1327 AE Almere. Holandsko
(Tel. : +31-(0)36-547-8888)
*POZNMKA : Pretudujte si prpravn hrky. 15 Regulatory Information cont.
ROMANESTE Declaraie de conformitate UE Prin prezenta, LG declar c acest(e) produs(e) este/sunt conform(e) cu cerinele eseniale i cu alte prevederi ale Directivei 2004/108/CE, 2006/95/CE, 2009/125/CE i (pentru produse care dispun de funcia fr fir*) 1999/5/CE. Reprezentant european:
LG Electronics Service Europe B.V. Veluwezoom 15, 1327 AE Almere. Olanda
(Tel: +31-(0)36-547-8888)
*NOT: Consultai fiele de pregtire. LG , 2004/108/EC, 2006/95/EC, 2009/125/EC (
*) 1999/5/EC.
LG Electronics Service Europe B.V. Veluwezoom 15, 1327 AE Almere. The Netherlands
(.: +31-(0)36-547-8888)
*: . . LG , / () 2004/108/EC, 2006/95/EC, 2009/125/EC ( *) 1999/5/EC.
LG Electronics Service Europe B.V. Veluwezoom 15, 1327 AE Almere. The Netherlands
(.: +31-(0)36-547-8888)
*: . UKRAINIAN LG ()
, 2004/108/EC, 2006/95/EC, 2009/125/EC
( *) 1999/5/EC.
LG Electronics Service Europe B.V. Veluwezoom 15, 1327 AE Almere.
( .: +31-(0)36-547-8888)
*. . 16 Regulatory Information cont. LG () 2004/108/EC, 2006/95/EC, 2009/125/EC
( *) 1999/5/EC
LG Electronics Service B.V. Veluwezoom 15, 1327 AE Almere.
( : +31-(0)36-547-8888)
*: . HRVATSKI Napomena o sukladnosti s EU standardima LG ovim putem izjavljuje da je ovaj proizvod sukladan svim osnovnim preduvjetima i drugim vanim odredbama direktiva 2004/108/EC, 2006/95/EC, 2009/125/EC i (za proizvode s funkcijom beinog prijenosa*) 1999/5/EC. Zastupnik za Europu:
LG Electronics Service Europe B.V. Veluwezoom 15, 1327 AE Almere. The Netherlands
(Tel.: +31-(0)36-547-8888)
*NAPOMENA: Pogledajte informacije o postavljanju. SRPSKI Napomena o usklaenosti sa standardima LG ovim izjavljuje da je/su ovaj/ovi proizvod(i) u skladu sa najbitnijim zahtevima i drugim relevant-
nim zakonskim odredbama Direktive 2004/108/EC, 2006/95/EC, 2009/125/EC i (za proizvode sa beinom funkcijom*) 1999/5/EC. Evropski predstavnik:
LG Electronics Service Europe B.V. Veluwezoom 15, 1327 AE Almere. Holandija
(Tel: +31-(0)36-547-8888)
*NAPOMENA: Pogledajte listove za pripremu. TRKE AB Uygunluk Bildirimi LG ibu belgeyle bu rnn/rnlerin 2004/108/EC, 2009/125/EC ve (kablosuz ilevi olan rnler iin) 2009/125/EC Ynetmeliinin temel gereklilikleri ve dier ilgili hkmleriyle uyumlu olduunu beyan eder Avrupa temsilcilii :
LG Electronics Service Europe B.V. Veluwezoom 15, 1327 AE Almere. The Netherlands
(Tel : +31-(0)36-547-8888)
*NOT : Ltfen hazrlk belgelerine bavurun. 17 Regulatory Information cont. SHQIP Deklarata e Konformitetit pr BE-n Nprmjet ksaj LG deklaron se ky/kto produkt(e) sht/jan n prputhje me krkesat themelore t dispozitave prkatse t Direktivave 2004/108/KE, 2006/95/KE, 2009/125/KE dhe (pr produktet q kan funksion t komunikimit me val*) 1999/5/KE. Prfaqsuesi evropian:
LG Electronics Service Europe B.V. Veluwezoom 15, 1327 AE Almere. The Netherlands
(Tel : +31-(0)36-547-8888)
*SHNIM: Ju lutemi referojuni fletve prgatitore. MACEDONIAN LG / () /
2004/108/EC, 2006/95/EC, 2009/125/EC (
*) 1999/5/EC.
LG Electronics Service Europe B.V. Veluwezoom 15, 1327 AE Almere. The Netherlands
( : +31-(0)36-547-8888)
/ / LG
.EC/5/1999 ( ) EC/125/2009 EC/95/2006 EC/108/2004
1327 ,15 B.V. Veluwezoom LG Electronics
.AE Almere
(8888-547-36(0)-31+ : )
EU LG2004/108/EC2006/95/EC2009/125/EC1999/5/EC(*)
LG Electronics Service Europe B.V. Veluwezoom 15, 1327 AE Almere.
(: +31-(0)36-547-8888)
18 Regulatory Information cont. BAHASA INDONESIA Catatan Kesesuaian EU LG dengan ini menyatakan bahwa produk ini sesuai dengan ketentuan utama dan ketentuan lain yang relevan dari Directive 2004/108/EC, 2006/95/EC, 2009/125/EC dan (untuk produk yang memiliki fungsi nirkabel*) 1999/5/EC. Perwakilan Eropa:
LG Electronics Service Europe B.V. Veluwezoom 15, 1327 AE Almere. Belanda
(Tel : +31-(0)36-547-8888)
*CATATAN: Baca lembar persiapan. LG / 2004/108/EC2006/95/EC2009/125/EC (
*) 1999/5/EC
LG Electronics Service Europe B.V. Veluwezoom 15, 1327 AE Almere. Netherlands
(: +31-(0)36-547-8888)
EU LG 2004/108/EC, 2006/95/EC, 2009/125/EC (
*) 1999/5/EC .
LG B.V. Veluwezoom 15, 1327 AE Almere. The Netherlands
(Tel : +31-(0)36-547-8888)
* : . 19
1 | User Manual 2 | Users Manual | 3.99 MiB |
E N G L I S H OWNERS MANUAL LCD MONITOR Please read this manual carefully before operating your set and retain it for future reference. LCD MONITOR MODEL E2211PB E2411PB www.lg.com WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. Safety Precautions Please read these safety precautions carefully before using the product. Warning Failure to follow those warnings may result in death, serious injury or damage to the product or other property. Electrical Power Related Precautions Warning Use only the power cord supplied with the unit or another manufacturer authorized cord.
- Failure to do so may result in fire or electrical shock or damage to the product. Use only a properly grounded plug and receptacle.
- If you do not you may be electrocuted or injured. Or the product might be damaged. Do not use a damaged or loose plug.
- This may cause electrical shock or fire. Operate the display only from a power source(i.e. voltage) indicated in the product specification.
- Otherwise the product can be damaged, fire can occur or you may be electrocuted. If you are not sure what type of power supply you have, consult a certified electrician. In the presence of thunder and lightning, never touch the power cord and signal cable because it can be very dangerous.
- It can cause electric shock. Do not connect several extension cords, electrical appliances or electrical heaters to a single outlet. Use a power bar with a grounding terminal designed for exclusive use with the computer.
- A fire can break out due to overheating. Do not touch the power plug with wet hands. Additionally, if the cord pin is wet or covered with dust, dry the power plug completely or wipe dust off before plugging in the cord.
- You may be electrocuted due to excess moisture. If you dont intend to use the product for a long time, unplug the power cable from the product.
- Covering dust can cause a fire, or insulation deterioration can cause electric leakage, electric shock or fire. Insert the power plug firm so it cannot come loose.
- A loose connect can cause fire. Hold the plug when pulling out the power cable. Do not pull the plug out by the wire. Do not bend the power cord with excessive force or put heavy objects on the power cord.
- The power line can be damaged, which may cause electric shock or fire. Do not insert conductive material (ea. metal chopstick) into the product opening into one end of the power cable while the other end is plugged in. Additionally, do not touch the power cable right after plugging into the wall input terminal.
- You may be electrocuted. The power supply cord is used as the main disconnection device. Ensure that the socket-outlet shall be installed near the equipment and shall be easily accessible. Do not unplug the power cord while the product is in use.
- Electrical shock can damage the product. As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if the unit is turned off. 1 Safety Precautions Precautions in installing the Product Warning Keep away from heat sources like electrical heaters, curdles or other open flames.
- Electrical shock, fire, malfunction or deformation may occur. Keep the packing anti-moisture material or vinyl packing out of the reach of children.
- Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children. Do not put heavy objects on the product on sit upon it.
- If the product collapses or is dropped, you may be injured. Children must pay particular attention. Do not leave the power or signal cable when someone can trip over it.
- The passerby can falter, which can cause electrical shock, fire, product breakdown or injury. Install the product in a neat and dry place. Do not use near water.
- Dust or moisture can cause electrical shock, fire or product damage. Do not add accessory that have not been designed for this display. If you smell smoke or other odors or hear a strange sound from the product unplug the power cord and contact the service center.
- If you continue to use without taking proper measures, electrical shock or fire can occur. If you dropped the product or the case is broken, turn off the product and unplug the power cord.
- If you continue to use without taking proper measures, electrical shock or fire can occur. Contact the service center. Do not drop an object on or apply impact to the product. Do not throw any toys or objects at the product.
- It can cause injury to humans, problems to the product and damage the display. Keep out of reach of children and do not place toys near the product. Make sure the product ventilation hole is not blocked. Install the product more than 10cm from the wall.
- If you install the product too close to the wall, it may be deformed or fire can break out due to internal heat build-up. Do not cover the product with cloth or other material (eg. plastic) while plugged in.
- The product can be deformed or fire can break out due to internal overheating inside the product. Place the product on a flat and stable surface that is large enough to support the product.
- If the product is dropped, you may be injured or the product may be broken. Install the product where no Electromagnetic Interference occurs. Keep the product away from direct sunlight.
- The product can be damaged. Do not place the product on the floor.
- Small Children and others may trip over it. Precautions in Moving the Product Warning Make sure to turn off the product.
- You may be electrocuted or the product can be damaged. Make sure to remove all cables before moving the product.
- You may be electrocuted or the product can be damaged. When lifting or moving the product, do not hold it upside down while holding only the stand.
- This may cause the product to fall resulting in damage or injury. Do not shock the product when moving it.
- You may be electrocuted or the product can be damaged. 2 Safety Precautions Make sure the panel faces forward and hold it with both hands to move.
- If you drop the product, the damaged product can cause electric shock or fire. Contact an authorized the service center for repair. Do not place the product face down.
- This may damage the TFT-LCD screen. Precautions in Using/Cleaning the Product Warning Do not attempt to disassemble, repair or modify the product yourself.
- Fire or electric shock can occur.
- Contact the service center for repair. When cleaning the product, unplug the power cord and scrub gently with a soft cloth to prevent scratching. Do not clean with a wet cloth. Or spray water or other liquids directly onto the product. An electric shock may occur. (Do not use chemicals such as benzene, paint thinners or alcohol) Keep the product away from water.
- Fire or electric shock accident can occur. Avoid high temperatures and humidity. Do not put or store flammable substances near the product.
- There is a danger of explosion or fire. Keep the product clean at all times. Take a comfortable and natural position when working with a product to relax the muscles. Take a regular break when working with a product for a long time. Do not press on the panel with a hand or sharp object such as nail, pencil or pen, or make a scratch on it. Keep proper distance from the product and rest from time-to-time.
- Your vision may be impaired if you look at the product too closely or fpr too long. Set the appropriate resolution by referring to the Users Guide.
- Your vision can be impaired. Keep small accessories out of the reach of children. Leaving a fixed image on the screen for a long time may cause damage to the screen and cause image burn-in. Make sure to use a screen saver on the product. Burn-in and related problems are not covered by the warranty on this product. Spray water onto a soft cloth 2 to 4 times, and use it to clean the front frame;wipe in one direction only. Too much moisture may cause staining. On Disposal Do not dispose of this product with general household waste. Disposal of this product must be carried out in accordance to the regulations of your local authority. 3 Safety Precautions NOTE The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the users authority to operate the equipment. NOTE This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and the receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. NOTE For displays with glossy bezels the user should consider the placement of the display as the bezel may cause disturbing reflections from surrounding light and bright surfaces. 4 Accessories
!!! Thank for selecting LGE products !!!
Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. User's Guide/Cards Power Cord DVI-D Signal Cable
(This feature is not available in all countries.) 15-pin D-Sub Signal Cable
(To set it up, this signal cable may be attached to this product before shipping out.) NOTE This accessories may look different from those shown here. User must use shielded signal interface cables (D-sub 15 pin cable, DVI-D cable) with ferrite cores (core in the connector) to maintain standard compliance for the product. 5 Connecting the Display E2211PB Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices are turned off. Connecting the stand base 1. Place the monitor with its front facing downward on a cushion or soft cloth. 2. Assemble the Stand Base into the Stand Body. Be sure don't pull out the Stop Pin and make the Stand Base direction as shown. Stop Pin Stand Body Stand Base WARNING The tape and locking pin may only be removed from those monitors equipped with a standing base when the base is pulled up. Otherwise, you may be injured by the protruding sections of the stand. Product Handling with Care : When you lift up or move the product, Do Not hold or touch the front part of LCD panel. It will damage the panel. (Please hold the Stand Body or plastic cover of the product.) 6 Connecting the Display E2211PB 3. Use a coin on the back of the stand base and turn the screw clockwise to tighten. 4. Lift and turn the monitor to face towards the front after the connection is made to the female part of the cable you're attaching. Removing the stand base 1. Place the monitor with its front facing downward on a cushion or soft cloth. 2. When you desire to disintegrate the monitor from the stand base, use a coin to turn the screw counterclockwise. IMPORTANT This illustration depicts the general model of connection. Your monitor may differ from the items shown in the picture. Do not carry the product upside down holding only the stand base. The product may fall and get damaged or injure your foot. 7 Connecting the Display E2411PB Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices are turned off. Connecting the stand base 1. Place the monitor with its front facing downward on a cushion or soft cloth. 2. Assemble the Stand Base into the Stand Body. Be sure don't pull out the Stop Pin and make the Stand Base direction as shown. Stand Body Stand Base Stop Pin 3. Once assembled take the monitor up carefully and face the front side. WARNING The tape and locking pin may only be removed from those monitors equipped with a standing base when the base is pulled up. Otherwise, you may be injured by the protruding sections of the stand. Product Handling with Care : When you lift up or move the product, Do Not hold or touch the front part of LCD panel. It will damage the panel. (Please hold the Stand Body or plastic cover of the product.) 8 Connecting the Display E2411PB Removing the stand base 1. Place the monitor with its front facing downward on a cushion or soft cloth. 2. While pressing the latches, push the stand base in the direction of the arrow to separate from the stand body. IMPORTANT This illustration depicts the general model of connection. Your monitor may differ from the items shown in the picture. Do not carry the product upside down holding only the stand base. The product may fall and get damaged or injure your foot. 9 Connecting the Display Positioning your display After installation, adjust the angle as shown below. 1. Adjust the position of the panel in various ways for maximum comfort. Tilt Range Swivel Range : 356 Height Range : maximum 4.33 inches (110.0 mm) 110.0 mm
* Please be sure to remove the Locking pin to adjust the height. 10 Connecting the Display When adjusting the angle of the screen, do not put your finger(s) in between the head of the monitor and the stand body. You can hurt your finger(s). When adjusting the height of the screen, do not put your finger(s) in between the head of the monitor and the stand base. You can hurt your finger(s). WARNING You do not need to replace the Locking pin after it is removed, to adjust its height. ERGONOMIC It is recommended that in order to maintain an ergonomic and comfortable viewing position, the forward tilt angle of the monitor should not exceed 5 degrees. 11 Connecting the Display Using the Pivot function
-The pivot function allows you to rotate the screen 90 degrees clockwise. 1. Lift the monitor to its highest height to utilize the Pivot function. 2. Landscape & Portrait : You can rotate the panel 90o clockwise. Please be cautious and avoid contact between the monitor head and the Stand Base when rotating the screen to access the Pivot function. If the monitor head touches the Stand Base, then the Stand Base could crack. Head section Stand section 3. Be careful with the cables when rotating the screen. 12 Connecting the Display Connecting with the PC 1. Before setting up the monitor, ensure that the power to the monitor, the computer 2. Connect signal input cable and power cord in order, then tighten the screw system, and other attached devices is turned off. 1 2 of the signal cable. A B Connect DVI-D(Digital signal) Cable Connect D-sub(Analog signal) Cable NOTE This is a simplified representation of the rear view. This rear view represents a general model; your display may differ from the view as shown. When using a D-Sub signal input cable connector for Macintosh Mac adapter : For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-sub VGA connector on the supplied cable to a 15 pin 2 row connector. Varies according to model. Wall-outlet type Connect the signal input cable and tighten it up by turning in the direction of the arrow as shown in the figure. DVI-D (This feature is not available in all countries.) 13 Connecting the Display 3. Put the power cord and cables into the cable holder.(Only E2411PB) Cable Holder 4. Press the power button on the front panel to turn the power on. When monitor power is turned on, the 'Self Image Setting Function' is executed automatically.
(Only Analog Mode) Power Button NOTE Self Image Setting Function? This function provides the user with optimal display settings.When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals. AUTO Function? When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, press the AUTO function button to improve resolution. 14 Control Panel Functions Front Panel Controls MENU Button OSD LOCKED/UNLOCKED This function allows you to lock the current control settings, so that they cannot be inadvertently changed. Press and hold the MENU button for several seconds. The message "OSD LOCKED" should appear. You can unlock the OSD controls at any time by pushing the MENU button for several seconds. The message
"OSD UNLOCKED" should appear. SUPER ENERGY SAVING Button Use this button to enter SUPER ENERGY SAVING menu.For more information, refer to page 22. 15 Control Panel Functions AUTO Button AUTO IMAGE ADJUSTMENT When adjusting your display settings, always press the AUTO button before entering the On Screen Display(OSD). (Only Analog Mode) This will automatically adjust your display image to the ideal settings for the current screen resolution size (display mode). The best display mode is E2211PB/E2411PB : 1920 x 1080 INPUT Button
(SOURCE Hot key) When two input signals are connected, you can select the input signal (D-SUB/DVI) you want. When only one signal is connected, it is automatically detected. The default setting is D-Sub. EXIT Button Exit the OSD(On Screen Display). Power Button &
Power Indicator Use this button to turn the display on or off. The power indicator stays white if the display is running properly (On Mode). If the display is in Sleep Mode
(Energy Saving), the power indicator is blinking white. 16 On Screen Display (OSD) Control Adjustment Screen Adjustment Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls. The following section is an outline of the available adjustments and selections you can make using the OSD. To make adjustments in the On Screen Display, follow these steps:
1 2 3 4 Press the discretionary Button, then the main menu of the OSD appears. To access a control, use the corresponding Buttons. Use the / Buttons to adjust the image to the desired level. Use the Button to select other sub-menu items. Press the EXIT Button to exit from the OSD. 17 On Screen Display(OSD) Selection and Adjustment The following table indicates all the On Screen Display control, adjustment, and setting menus. DSUB DVI-D
: D-SUB(Analog signal) input
: DVI-D(Digital signal) input Main menu Sub-menu Supported input Description MENU SUPER ENERGY SAVING BRIGHTNESS ORIGINAL RATIO COLOR TEMP
(PRESET / USER) CONTRAST LANGUAGE FACTORY RESET ON OFF RESET To adjust the brightness of the screen DSUB DVI-D To adjust the image size To customize the color of the screen To adjust the contrast of the screen To customize the screen status for a user's operating environment DSUB DVI-D Turn on the SUPER ENERGY SAVING function. Turn off the SUPER ENERGY SAVING function. Initialize the SUPER ENERGY SAVING and set to "OFF" mode. NOTE The order of icons may differ depending on the model (18~24). 18 On Screen Display(OSD) Selection and Adjustment You were introduced to the procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. Press the MENU Button, then the main menu of the OSD appears. Menu Name Icons Sub-
menus Button Tip Exit Adjust (Decrease/Increase) Select another sub-menu Restart to select sub-menu NOTE OSD (On Screen Display) menu languages on the monitor may differ from the manual. 19 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description To adjust the brightness of the screen. WIDE Switch to full screen mode according to input image signal. ORIGINAL Change the input image signal ratio to original.
* This function works only if input resolution is lower than monitor ratio
(16:9). PRESET Select the screen color. WARM: Set the screen to warm color temperature . MEDIUM: Set the screen to medium color temperature. COOL: Set the screen to cool color temperature. USER RED Set your own red color levels. GREEN Set your own green color levels. BLUE Set your own blue color levels. Exit : Exit
: Move
: Select another sub-menu 20 On Screen Display(OSD) Selection and Adjustment Main menu Description To adjust the contrast of the screen. To choose the language in which the control names are displayed. Restore all factory default settings except
"LANGUAGE."
Press the , buttons to reset immediately. 21 Exit : Exit
: Move
: Select another sub-menu On Screen Display(OSD) Selection and Adjustment You were introduced to the procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. Press the SUPER ENERGY SAVING Button, then the main menu of the OSD appears. Menu Name Icons Sub-menus Button Tip Exit Move Restart to select sub-menu NOTE OSD (On Screen Display) menu languages on the monitor may differ from the manual. 22 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description ON OFF Turn on the SUPER ENERGY SAVING fuction. When current setting value is ON,the SUPER SAVING color is green. Turn off the SUPER ENERGY SAVING function.Now the monitor is LED SAVING function. When current setting value is OFF,the SUPER SAVING color is gray. RESET Clear the TOTAL POWER REDUCTION and TOTAL CO2 REDUCTION values. Exit : Exit
: Move
: Select another sub-menu OK : Select TOTAL POWER REDUCTION : How much power is saved during using the monitor. TOTAL CO2 REDUCTION : Change the TOTAL POWER REDUCTION to CO2. 23 On Screen Display(OSD) Selection and Adjustment NOTE SAVING DATA(W/h):
22 inch 24 inch SUPER SAVING LED SAVING 4 15 5 17 Saving Data depends on the Panel. So,those values should be different from each panel and panel vendor. LG accumulate those values using integrated function with 10 minutes broadcast video signal. LED Saving means that how much power can be saved using WLED Panel instead of CCFL panel. SUPER Saving means that how much power can be more saved using SUPER ENERGY SAVING function. 24 Troubleshooting Check the following before calling for service. No image appears No image appears G Is the power cord of the display connected?
Check and see if the power cord is connected properly to the power outlet. G Is the power indicator Press the Power button. light on?
G Is the power indicator flickering?
G Do you see an "OUT OF RANGE" message on the screen?
G Do you see a "CHECK SIGNAL CABLE"
message on the screen?
If the display is in power saving mode, try moving the mouse or pressing any key on the keyboard to bring up the screen. Try to turn on the PC. This message appears when the signal from the PC (video card) is out of horizontal or vertical frequency range of the display. See the
'Specifications' section of this manual and configure your display again. This message appears when the signal cable between your PC and your display is not connected. Check the signal cable and try again. Do you see a "OSD LOCKED" message on the screen?
G Do you see OSD LOCKED when you push MENU button?
You can secure the current control settings, so that they cannot be inadvertently changed. You can unlock the OSD controls at any time by pushing the MENU button for several seconds: the message OSD UNLOCKED will appear. 25 Troubleshooting Display image is incorrect G Display Position is incorrect. Press the AUTO button to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, adjust the image position using the H position and V position icon in the on screen display. G On the screen background, vertical bars or stripes are visible. Press the AUTO button to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, decrease the vertical bars or stripes using the CLOCK icon in the on screen display. G Any horizontal noise appearing in any image or characters are not clearly portrayed. Press the AUTO button to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, decrease the horizontal bars using the PHASE icon in the on screen display. Check Control Panel --> Display --> Settings and adjust the display to the recommended resolution or adjust the display image to the ideal setting. Set the color setting higher than 24 bits
(true color). IMPORTANT Check Control Panel --> Display --> Settings and see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution. If the recommended resolution (optimal resolution) is not selected, letters may be blurred and the screen may be dimmed, truncated or biased. Make sure to select the recommend resolution. The setting method can differ by computer and O/S (Operation System), and resolution mentioned above may not be supported by the video card performance. In this case, please ask to the computer or the video card manufacturer. 26 Troubleshooting Display image is incorrect G The screen color is mono or abnormal. Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. Make sure the video card is properly inserted in the slot. Set the color setting higher than 24 bits (true color) at Control Panel - Settings. G The screen blinks. Check if the screen is set to interlace mode and if yes, change it to the recommend resolution. Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message?
G Have you installed the display driver?
Be sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you can also download the driver from our web site: http://www.lg.com. Make sure to check if the video card supports Plug&Play function. 27 Specifications E2211PB Display Sync Input Video Input Resolution TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel, Anti-Glare coating 54.6 cm visible diagonal (21.5 inch) 0.248 x 0.248 mm (Pixel pitch) Horizontal Freq. Vertical Freq. Input Form 30 kHz to 83 kHz (Automatic) 56 Hz to 75 Hz (Automatic) Separate Sync. Digital Signal Input Input Form Max Recommend 15 pin D-Sub Connector DVI-D Connector (Digital) RGB Analog (0.7 Vp-p/ 75 ohm), Digital VESA 1920 x 1080 @60 Hz VESA 1920x 1080 @60 Hz Plug&Play DDC 2B(Digital),DDC2AB(Anlaog) Power Consumption On Mode Sleep Mode Off Mode
: 28 W(Typ.) 0.3 W 0.3 W Dimensions
& Weight With Stand Width 50.92 cm ( 20.04 inch) Height 35.39 cm ( 13.93 inch)(Min.) 46.39 cm ( 18.26 inch)(Max.) Without Stand Width 50.92 cm ( 20.04 inch) Height 30.42 cm ( 11.97 inch) Depth 22.44 cm ( 8.83 inch) Weight(excl. packing) Depth 6.17 cm ( 2.43 inch) 3.8 kg (8.43 lb) Range Tilt Swivel Height
-4 to 16 356 110 mm / 4.33 inch Power Input AC 100 - 240 V~ 50 / 60 Hz 1.0 A Environment al Conditions Operating Conditions Temperature Humidity 10 C to 35 C 10 % to 80 % non-Condensing Storage Conditions Temperature Humidity
-20 C to 60 C 5 % to 90 % non-Condensing Stand Base Power cord NOTE Attached ( ), Detached ( O ) Wall-outlet type Information in this document is subject to change without notice. 28 Specifications E2411PB Display Sync Input Video Input Resolution TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel, Anti-Glare coating 60.9 cm visible diagonal (24 inch) 0.276 x 0.276 mm (Pixel pitch) Horizontal Freq. Vertical Freq. Input Form 30 kHz to 83 kHz (Automatic) 56 Hz to 75 Hz (Automatic) Separate Sync. Digital Signal Input Input Form Max Recommend 15 pin D-Sub Connector DVI-D Connector (Digital) RGB Analog (0.7 Vp-p/ 75 ohm), Digital VESA 1920 x 1080 @60 Hz VESA 1920x 1080 @60 Hz Plug&Play DDC 2B(Digital),DDC2AB(Anlaog) Power Consumption On Mode Sleep Mode Off Mode
: 30 W(Typ.) 0.3 W 0.3 W Dimensions
& Weight With Stand Width 56.91 cm ( 22.40 inch) Height 43.26 cm ( 17.03 inch)(Min.) 54.26 cm ( 21.36 inch)(Max.) Without Stand Width 56.91 cm ( 22.40 inch) Height 34.19 cm ( 13.46 inch) Depth 27.11 cm ( 10.67 inch) Weight(excl. packing) Depth 6.30 cm ( 2.48 inch) 5.1 kg (11.33 lb) Range Tilt Swivel Height
-4 to 17 356 110 mm / 4.33 inch Power Input AC 100 - 240 V~ 50 / 60 Hz 1.2 A Environment al Conditions Operating Conditions Temperature Humidity 10 C to 35 C 10 % to 80 % non-Condensing Storage Conditions Temperature Humidity
-20 C to 60 C 5 % to 90 % non-Condensing Stand Base Power cord NOTE Attached ( ), Detached ( O ) Wall-outlet type Information in this document is subject to change without notice. 29 Specifications Preset Modes (Resolution) E2211PB/E2411PB Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz) 1 2 3 4 5 6 7 8 9 10 11
*12 720 x 400 640 x 480 640 x 480 800 x 600 800 x 600 1024 x 768 1024 x 768 1152 x 864 1280 x 1024 1280 x 1024 1680 x 1050 1920 x 1080 31.468 31.469 37.500 37.879 46.875 48.363 60.023 67.500 63.981 79.976 65.290 67.500 70 60 75 60 75 60 75 75 60 75 60 60
*Recommend Mode Indicator MODE On Mode Sleep Mode Off Mode LED Color White White Blinking Off 30 Installing the Wall mount plate This monitor satisfies the specifications of the Wall mount plate or the interchange device. 1. After moving the product to face downward, make sure to place it on a soft cloth or a cushion to avoid surface damage. 2. Separate the head and the stand with the use of a screwdriver. 31 Installing the Wall mount plate 3. Install the Wall mount plate. Wall mount plate(Separate purchase) This is stand-type or wall mount type and is connectable with Wall mount plate. Please refer to the installation guide for more details, which is provided when Wall mount plate is purchased. Wall Mount pad
<Screw Mounting Interface Dimension>
Hole spacing : 100 mm x 100 mm. Kensington Security Slot Connected to a locking cable that can be purchased separately at most computer stores. NOTE VESA compatible only with respect to screw mounting interface dimensions and mounting screw specifications Please use VESA standard as below.
* 784.8 mm and under (30.9 inch)
- Wall Mount Pad Thickness : 2.6 mm
- Screw : 4.0 mm x Pitch 0.7 mm x Length 10 mm
* 787.4 mm and above (31.0 inch)
- Please use VESA standard wall mount pad and screws. 32 Make sure to read the Safety Precautions before using the product. Keep the OWNERS MANUAL(CD) in an accessible place for furture reference. The model and serial number of the SET is located on the back or one side of the SET. Record it below should you ever need service. MODEL SERIAL ENERGY STAR is a set of power-saving guidelines issued by the U.S.Environmental Protection Agency(EPA). As an ENERGY STAR Partner LGE U. S. A.,Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency.
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2012-06-27 | JBP - Part 15 Class B Computing Device Peripheral | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2012-06-27
|
||||
1 | Applicant's complete, legal business name |
LG Electronics USA
|
||||
1 | FCC Registration Number (FRN) |
0020917688
|
||||
1 | Physical Address |
1000 Sylvan Avenue
|
||||
1 |
Englewood Cliffs, New Jersey 07632
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
h******@acbcert.com
|
||||
1 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
BEJ
|
||||
1 | Equipment Product Code |
E2411PX
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
K**** H****
|
||||
1 | Title |
Director, Standards & Compliance
|
||||
1 | Telephone Number |
201-4********
|
||||
1 | Fax Number |
201-8********
|
||||
1 |
k******@lge.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
Audix Technology (Shanghai) Co., Ltd.
|
||||
1 | Name |
B******** K********
|
||||
1 | Physical Address |
3F 34Bldg 680 Guiping Rd., Caohejing Hi-Tech Park
|
||||
1 |
Shanghai, 200233
|
|||||
1 |
China
|
|||||
1 | Telephone Number |
+86-2******** Extension:
|
||||
1 | Fax Number |
+86-2********
|
||||
1 |
b******@audix.com.cn
|
|||||
app s | Non Technical Contact | |||||
1 | Firm Name |
Audix Technology (Shanghai) Co., Ltd.
|
||||
1 | Name |
A******** H********
|
||||
1 | Physical Address |
3F 34Bldg 680 Guiping Rd., Caohejing Hi-Tech Park
|
||||
1 |
Shanghai, 200233
|
|||||
1 |
China
|
|||||
1 | Telephone Number |
+86-2******** Extension:
|
||||
1 | Fax Number |
+86-2********
|
||||
1 |
a******@audix.com.cn
|
|||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | JBP - Part 15 Class B Computing Device Peripheral | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Part15 Subpart B-LCD Monitor | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Recommend Resolution : 1920 x 1080 | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Audix Technology ( Shanghai ) Co., Ltd.
|
||||
1 | Name |
B****** K********
|
||||
1 | Telephone Number |
021-6********
|
||||
1 | Fax Number |
021-6********
|
||||
1 |
b******@audix.com.cn
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15B | 20 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC