all | frequencies |
|
|
exhibits | applications |
---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Users Manual Part 1 | Users Manual | 1.27 MiB | January 06 2005 | |||
1 |
|
Users Manual Part 3 | Users Manual | 1.35 MiB | May 06 2005 | |||
1 | Cover Letter(s) | January 06 2005 | ||||||
1 | Cover Letter(s) | January 06 2005 | ||||||
1 | Cover Letter(s) | January 06 2005 | ||||||
1 | External Photos | January 06 2005 | ||||||
1 | Internal Photos | January 06 2005 | ||||||
1 | ID Label/Location Info | January 06 2005 | ||||||
1 | Operational Description | January 06 2005 | ||||||
1 | Cover Letter(s) | January 06 2005 | ||||||
1 | Cover Letter(s) | January 06 2005 | ||||||
1 | Cover Letter(s) | January 06 2005 | ||||||
1 | Test Setup Photos | January 06 2005 | ||||||
1 | Test Report | January 06 2005 |
1 | Users Manual Part 1 | Users Manual | 1.27 MiB | January 06 2005 |
External A/V Source Setup A/V Source Setup External How to connect Connect the audio and video cables from the external equip-
ment's output jacks to the TV input jacks, as shown in the figure. When connecting the TV to external equipment, match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red). How to use 1. Select the input source with using the TV/VIDEO button on the remote control. (If connected to A/V INPUT , select Video input source). 2. Operate the corresponding external equipment. Refer to external equipment operating the tv guide on screen system. DVD Setup DVD Setup HDMI /
DVI(VIDEO) AUDIO INPUT DIGITAL AUDIO(OPTICAL) DVI COMPONENT2 VIDEO INPUT HDMI /
DVI(VIDEO) AUDIO INPUT DIGITAL AUDIO(OPTICAL) DVI COMPONENT2 VIDEO INPUT Cable ANTENNA CABLE AC INPUT Camcorder R AUDIO L VIDEO Video Game Set Cable ANTENNA CABLE AC INPUT AC INPUT or DVD DIGITAL AUDIO OPTICAL
(R) AUDIO (L) B R S-VIDEO
(R) AUDIO (L) or How to connect 1. Connect the DVD video outputs (Y, PB, PR) to the COMPONENT (Y, PB, PR) INPUT jacks on the TV and connect the DVD audio outputs to the AUDIO INPUT jacks on the TV, as shown in the figure. 2. If your DVD only has an S-Video output jack, connect this to the S-VIDEO input on the TV and connect the DVD audio outputs to the AUDIO INPUT jacks on the TV, as shown in the figure. Note: If your DVD player does not have component video output, use S-Video. How to use 1. Turn on the DVD player, insert a DVD. 2. Use the TV/VIDEO or COMP/RGB/HDMI button on the remote control to select Component 1 or Component 2. (If connected to S-VIDEO, select the Video or Front Video external input source.) 3. Refer to the DVD player's manual for operating instructions. Component Input ports To get better picture quality, connect a DVD player to the compo-
nent input ports as shown below. Component ports on the TV Video output ports on DVD player Y Y Y Y Y PB PR Pb B-Y Cb PB Pr R-Y Cr PR Notes:
Digital Audio will not work for Component 1 input source. Digital Audio operation has priority if Digital Audio and AUDIO L/R are connected at the same time. Owners Manual 15 Installation CableCARDTMTM Setup Setup CableCARD How to use Insert the CableCARDTMTM received from Cable Service provider to CableCARDTMTM slot of TV back panel. If Host or CableCARDTMTM does not display on the screen, contact with Cable service provider by phone. Note :
CableCARDTMTM has the types of Motorola, Scientific Atlanta, SCM etc.. These 3 types of CableCARDTMTM can be used for this PLASMA TV. Caution: When removing the CableCARDTMTM, do not fall it as this may cause impact to the CableCARDTMTM. Cable ANTENNA CABLE AC INPUT HDSTB Setup HDSTB Setup
- This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive Digital signals from a digital set-top box or other digital external device, refer to the figure as shown below.
- This TV supports HDCP (High-bandwidth Digital Contents Protection) protocol for Digital Contents (480p,720p,1080i). HDMI /
DVI(VIDEO) AUDIO INPUT DIGITAL AUDIO(OPTICAL) DVI COMPONENT2 VIDEO INPUT Cable ANTENNA CABLE AC INPUT or RGB-DTV OUTPUT
(R) AUDIO (L) or
(R) AUDIO (L) DIGITAL AUDIO OPTICAL DVI-DTV OUTPUT HDMI-DTV OUTPUT or or DIGITAL AUDIO OPTICAL
(R) AUDIO (L) B R Digital Set-top Box How to connect Use the TVs COMPONENT (Y, PB, PR) INPUT, RGB or HDMI/DVI jack for video connections, depending on your set-top box connector. Then, make the corresponding audio connections. How to use 1. Turn on the digital set-top box. (Refer to the owners manual for the digital set-top box.) 2. Use TV/VIDEO or COMP/RGB/HDMI on the remote control to select Component 1, Component 2, RGB-DTV, or HDMI/DVI source. 16 Plasma TV Signal 480i 480p 720p 1080i Component 1/2 RGB-DTV,HDMI/DVI Yes Yes Yes Yes No Yes Yes Yes PC Setup PC Setup
- This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings.
- The TV perceives 640x480, 60Hz as DTV 480p based on the PC graphic card, change the screen scanning rate for the graphic card accordingly. Installation HDMI /
DVI(VIDEO) AUDIO INPUT DIGITAL AUDIO(OPTICAL) DVI COMPONENT2 VIDEO INPUT Cable ANTENNA CABLE AC INPUT How to connect 1. To get the best picture quality, adjust the PC graphics card to 1024x768, 60Hz. 2. Use the TVs RGB INPUT or HDMI/DVI (Digital Visual Interface) INPUT port for video connections, depending on your PC con-
nector. If the graphic card on the PC does not output analog and digital RGB simultaneously, connect only one of either RGB INPUT or DVI INPUT to display the PC on the TV. If the graphic card on the PC does output analog and digital RGB simultaneously, set the TV to either RGB or HDMI/DVI; (the other mode is set to Plug and Play automatically by the TV.) 3. Then, make the corresponding audio connections. If using a sound card, adjust the PC sound as required. How to use 1. Turn on the PC and the TV. 2. Turn on the display by pressing the POWER button on the TV's remote control. 3. Select RGB-PC or HDMI/DVI input source in main input option of SETUP menu. (Refer to P.59) 4. Check the image on your TV. There may be noise associated with the resolution, vertical pattern, contrast or brightness in PC mode. If noise is present, change the PC mode to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the menu until the picture is clear. If the refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult the manufacturer of the PC graphic card. Notes:
Depending on the graphics card, DOS mode may not work if you use a HDMI to DVI cable. Avoid keeping a fixed image on the TV's screen for a long period of time. The fixed image may become permanently imprinted on the screen. Use the Orbiter screen saver when possible. The synchronization input form for Horizontal and Vertical frequencies is separate. Monitor Display Specifications (RGB-PC ) Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) 640x350 720x400 640x480 31.468 37.861 31.469 37.927 31.469 37.861 37.500 43.269 70.09 85.08 70.08 85.03 59.94 72.80 75.00 85.00 800x600 1024x768 35.156 37.879 48.077 46.875 53.674 48.363 56.476 60.023 56.25 60.31 72.18 75.00 85.06 60.00 70.06 75.02 Owners Manual 17 Installation Monitor Display Specifications (HDMI/DVI Mode) Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) 640x480 800x600 31.469 37.861 37.500 35.156 37.879 48.077 46.875 59.94 72.80 75.00 56.25 60.31 72.18 75.00 Monitor Out Setup Monitor Out Setup HDMI /
DVI(VIDEO) AUDIO INPUT DIGITAL AUDIO(OPTICAL) DVI COMPONENT2 VIDEO INPUT 1024x768 48.363 56.476 60.023 60.00 70.06 75.02 The TV has a special signal output capability which allows you to hook up a second TV or monitor. Cable ANTENNA Connect the second TV or monitor to the TVs MONITOR OUTPUT. See the Operating Manual of the second TV or monitor for further details regarding that devices input settings. Note Component, RGB-PC/RGB-DTV, HDMI/DVI, DTV input sources cannot be used for Monitor out. HDMI /
DVI(VIDEO) AUDIO INPUT DIGITAL AUDIO(OPTICAL) DVI COMPONENT2 VIDEO INPUT Cable ANTENNA S-VIDEO IN
(R) AUDIO (L) VIDEO Digital Audio Output Audio Output Digital Send the TVs audio to external audio equipment (stereo system) via the Digital Audio Output (Optical) port. How to connect 1. Connect one end of an optical cable to the TV Digital Audio
(Optical) Output port. 2. Connect the other end of the optical cable to the digital audio (opti-
cal) input on the audio equipment. 3. Set the TV Speaker option - Off in the AUDIO menu. Refer to page 64. See the external audio equipment instruction manual for operation. Caution: Do not look into the optical output port. Looking at the laser beam may damage your vision. 18 Plasma TV HDMI/DVI (VIDEO) HDMI/DVI (VIDEO) HDMI
-HDMITM, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC."
-This TV SET can receive the High-Definition Multimedia Interface(HDMI) or Input of Digital Visual Interface(DVI).
-This TV SET supports HDCP(High-bandwidth Digital Contents Protection) Protocol for TV SET(480p, 720p, 1080i) modes.
-When you Connect with HDMI/DVI Source Devices (DVD Player or Set Top Box or PC) supporting Auto HDMI/DVI function, auto-
matically, support Plug & Play and then set the HDMI/DVI Source Devices(1280 x 720p). After reading in HDMI/DVI Source Devices using Display Data Channel(DDC) Protocol, EDID stored in TV SET is used . If HDMI/DVI Source Devices not support-
ed Auto HDMI/DVI is been, the Resolution is setted, manually.
- To get the best picture quality, adjust the DVD Player or Set Top Box output resolution to 1280 x 720p.
- To get the best picture quality, adjust the PC graphics card to 1024 x 768, 60Hz.
- When Source Devices have DVI Output Connector, you must connect audio with separated cable.(Refer to <How to connect>) How to connect 1. When Source Devices(DVD Player or Set Top Box) support HDMI.
- If Source Devices have HDMI Output Connector, Source Devices connect to DTV with HDMI Cable .(not supplied with the prod-
uct).
- If Source Devices support Auto HDMI, automatically, Source Devices divert output resolution in 1280x720p. But if not, resolution divert Manually Setting for reference Manual of Source Devices.
- To get the best picture quality, adjust the DVD Player or Set Top Box output resolution to 1280 x 720p.
- Because HDMI sends Digital Video and Audio with one cable, need not especial Audio Cable for using HDMI Cable. 2. When Source Devices(DVD Player or Set Top Box) supports DVI.
- If Source Devices have DVI Output Connector, Source Devices connect to DTV with HDMI to DVI Cable (not supplied with the product).
- If Source Devices support Auto DVI, automatically, Source Devices divert output resolution in 1280x720p. But if not, resolution divert Manually Setting for reference Manual of Source Devices.
- To get the best picture quality, adjust the DVD Player or Set Top Box output resolution to 1280 x 720p.
- In this case, Audio use other cable. When Source Devices have Fiber Optic Digital Audio Output Connector, Digital Audio DVI Input(DVI) of DTV connect to Fiber Optic Digital Audio Cable (not supplied with the product) or when Source Devices have Analog Audio Output Connector, RGB/DVI Audio Input of DTV connect to Audio Cable (not supplied with the product). And then you can listen to normal Audio. 3. When PC supports DVI.
- If PC have DVI Output Connector, Source Devices connect to DTV with HDMI to DVI Cable (not supplied with the product).
- To get the best picture quality, adjust the PC graphics card to 1024 x 768, 60Hz.
- Use the DTVs HDMI/DVI(VIDEO) for video connections, depending on your PC connector.
- If the graphics card on the PC does not output analog RGB and DVI simultaneously, connect only one of either RGB Input or HDMI/DVI Input to display the PC on the DTV.
- If he graphics card on the PC does output analog RGB and DVI simultaneously, set the DTV to either RGB Input or HDMI/DVI Input;(the other mode is set to Plug and Play automatically by the DTV.)
- Then, make the corresponding audio connections. If using a sound card, adjust the PC sound as required.
- In this case, Audio use other cable. When PC (or sound card of PC) have Fiber Optic Digital Audio Output Connector, Digital Audio DVI Input(DVI) of DTV connect to Fiber Optic Digital Audio Cable (not supplied with the product) or when PC (or sound card of PC) have Analog Audio Output Connector, RGB/DVI Audio Input of DTV connect to Analog Audio Cable (not supplied with the product). And then you can listen to normal Audio. Owners Manual 19 HDMI Reference Cable sample 20 Plasma TV HDMI Cable
(not supplied with the product) HDMI to DVI Cable
(not supplied with the product) Fiber Optic Digital Audio Cable
(not supplied with the product) Analog Audio Cable(RCA type)
(not supplied with the product) Analog Audio Cable(Stereo to RCA type)
(not supplied with the product) HDMI How to use 1. Connect the HDMI/DVI Source Devices(DVD Player or Set Top Box or PC) and the TV SET. 2. Turn on the display by pressing the POWER button on the TV SET and HDMI/DVI Source Devices remote control. 3. Select HDMI/DVI Input source in Main Input option of SETUP menu.(Refer to P.60) 4. Check the image on your TV SET. There may be noise associated with the resolution, vertical pattern, contrast or brightness in HDMI/DVI Source Devices. If noise is present, change the HDMI/DVI Source Devices to another resolution, change the refresh rate or adjust the brightness and contrast on the menu until the picture is clear. If the refresh rate of the PC graphics card can not changed, change the PC graphics card or consult the manufacturer of the PC graphics card. Notes:
- Depending on the graphics card, DOS mode may not work if you use a HDMI to DVI Cable.
- Avoid keeping a fixed image on the TV SET screen for a long period of time. The fixed image may become permanently imprint-
ed on the screen. Use the Orbiter screen saver when possible.
- When Source Devices connected HDMI/DVI Input, output PC Resolution(VGA, SVGA, XGA), Position, Size may not fit to Screen. As shown the lower picture, press the Adjust button to adjust the screen Position of TV SET and contact an PC graph-
ics card service center.
- When Source Devices connected HDMI/DVI Input output TV SET Resolution(480p, 720p, 1080i), TV SET Display fit EIA/CEA-
861-B Specification to Screen. If not, refer to the Manual of HDMI/DVI Source Devices or contact your service center.
- In case HDMI/DVI Source Devices is not connected Cable or poor cable connection, "NO SIGNAL" OSD display in HDMI/DVI Input. And In case of, Video Resolution not supported TV SET output in HDMI/DVI Source Devices, "INVALID FORMAT" OSD display. Refer to the Manual of HDMI/DVI Source Devices or contact your service center. POSITION G SIZE PHASE RESET Adjust Close F D E G In This Mode, the Supported TV SET Resolution Specification
- 1920 x 1080 I @ 59.94Hz / 60Hz, 16:9
- 1280 x 720 P @ 59.94Hz / 60Hz, 16:9(preferred format)
- 704 x 480 P @ 59.94Hz / 60Hz, 16:9
- 704 x 480 P @ 59.94Hz / 60Hz, 4:3 In This Mode, the Supported PC Resolution Specification
- 640 x 480 @ 60Hz
- 640 x 480 @ 72Hz
- 640 x 480 @ 75Hz
- 800 x 600 @ 56Hz
- 800 x 600 @ 60Hz
- 800 x 600 @ 72Hz
- 800 x 600 @ 75Hz
- 1024 x 768 @ 60Hz(preferred format)
- 1024 x 768 @ 70Hz
- 1024 x 768 @ 75Hz Owners Manual 21 Installation TV Guide On Screen Setup
- The TV Guide On Screen system uses Setup information to provide you with show listings and lineups in your areawhich are updated several times a day.
- Once you set up the TV according to manufacturers instructions, you are ready to set up the TV Guide On Screen system. Note: The TV Guide On Screen System interactive program guide provides listings for cable-ready, cable box, and digital cable services as well as over-the-air broadcast. It does not provide listings for satellite services. How to connect VCR and Cable Box 1. Antenna Service HDMI /
DVI(VIDEO) AUDIO INPUT DIGITAL AUDIO(OPTICAL) DVI COMPONENT2 VIDEO INPUT Cable ANTENNA CABLE AC INPUT AC INPUT AC INPUT AC INPUT ANT OUT ANT IN OUT OUTPUT SWITCH 3 4
(R) AUDIO (L) VIDEO IN VCR Front S-VIDEO VCR Rear 2. Cable Service without a Cable Box HDMI /
DVI(VIDEO) AUDIO INPUT DIGITAL AUDIO(OPTICAL) DVI COMPONENT2 VIDEO INPUT Cable ANTENNA CABLE ANT OUT ANT IN OUT OUTPUT SWITCH 3 4
(R) AUDIO (L) VIDEO IN VCR Front S-VIDEO VCR Rear 22 Plasma TV 3. Cable Service with a Cable Box Installation Cable ANTENNA CABLE AC INPUT AC INPUT or ANT OUT ANT IN OUT VCR Front S-VIDEO OUTPUT SWITCH 3 4
(R) AUDIO (L) VIDEO IN VCR Rear Cable Box Front RF Cable 4. Antenna and Cable Service without a Cable Box OUTPUT SWITCH 3 4
(R) AUDIO (L) VIDEO TV VCR Cable Box Rear Cable ANTENNA CABLE AC INPUT AC INPUT AC INPUT ANT OUT ANT IN OUT VCR Front S-VIDEO 5. Antenna and Cable Service with a Cable Box OUTPUT SWITCH 3 4
(R) AUDIO (L) VIDEO IN VCR Rear Cable ANTENNA CABLE AC INPUT AC INPUT or ANT OUT ANT IN OUT OUTPUT SWITCH 3 4
(R) AUDIO (L) VIDEO IN VCR Rear S-VIDEO OUTPUT SWITCH 3 4 RF Cable
(R) AUDIO (L) VIDEO TV VCR Cable Box Rear Owners Manual 23 VCR Front Cable Box Front Installation Note:
The G-LINK cable is necessary for the TV Guide On Screen system to work with your Cable Box and VCR. See Page 22~23 for G-LINK connection instructions. 1.Reminder Screen The TV Guide On Screen system's Reminder Screen appears:
-- after initial TV set up
-- if you power Off the TV and then power it back On To make a selection, use the D / E button to highlight to an option, and press ENTER.
"Set up TV Guide On Screen now," displays the Welcome Screen. Press ENTER to begin Setup.
"Remind me to set up later" returns you to watching TV.
"Don't remind me again" returns you to watching TV and stops the reminder screen from appearing upon power On. 2.Welcome Screen The TV Guide On Screen system's Welcome Screen appears:
-- by pressing the TV Guide key
-- when you power On your TV if you previously skipped "Set up TV Guide On Screen now" on the Reminder Screen. The Welcome Screen highlights features of the TV Guide On Screen system. Press ENTER to begin Setup. How to use 1. Screen 1: Country This screen asks you the location of your TV. Use the D / E button to highlight a country. Press ENTER to display Screen 2. 24 Plasma TV
1 | Users Manual Part 3 | Users Manual | 1.35 MiB | May 06 2005 |
TV Guide On Screen System TV Guide On Screen System continued System continued TV Guide On Screen V < Setup >
- After you initially complete Guide Setup, you can make changes to Guide settings in the following areas:
Change System Settings Change Channel Display Change Default Options Highlight a choice, press ENTER, and follow the on-screen instruc-
tions. With Setup highlighted, press the Info button to display a Help screen. Press the Info button again to close the screen. Change System Settings This option appears after you have completed the initial Guide Setup process. Press ENTER to display the Confirming Your Settings screen. You see your current settings. Choose one of the options, press ENTER, and follow the on-screen instructions. 46 Plasma TV TV Guide On Screen System continued System continued TV Guide On Screen TV Guide On Screen System Change Channel Display Change Channel Display lets you edit channel information that appears in Listings. With Change Channel Display you can :
Re-order the position or the channel appears in Listings Change the tune channel number Switch a channel W On - the channel is always displayed W Off - the channel is never displayed W Auto-Hide - the channel is only displayed when program information is available. Press ENTER to display the Channel Editor screen. Then, highlight a channel and press Menu. A Grid Options menu is displayed. Highlight Go Back to Setup to close the menu, change no information, and return to the Setup Service Bar. Or make changes and when finished, press ENTER to high-
light Done. Press ENTER again to close the menu and accept the changes. Highlight Cancel to close the menu, change no information, and return to the highlighted channel. Owners Manual 47 TV Guide On Screen System TV Guide On Screen System continued System continued TV Guide On Screen Change Default Options Change Default Options lets you change default settings in the following categories:
General Default Options Record Defaults Remind Defaults Highlight Change Default Options, and press ENTER.
<General Default Options>
General Default Options lets you set defaults for the following:
The initial Info Box size when the TV guide on screen system is entered. Choices are No, Small, Large, and Last Used
(Default = Last Used). The Info Box size rotation when the Info key is pressed while in the TV guide on screen system. Choices are No only, Small only, Large only, No & Small, No &
Large, Small & Large, All (Default = All) Automatic entry into the TV guide on screen system (Auto-Guide) when the TV is powered On. Choices are On and Off (Default = On). Highlight General Default Options, and press the Menu key to dis-
play the General Default Options menu. Highlight Go to Service Bar to close the menu, change no infor-
mation, and return to the Setup Service Bar. When finished, press ENTER to highlight Done. Press ENTER again to close the menu and accept the changes. Highlight Cancel to close the menu, change no information, and return to the highlighted option. 48 Plasma TV TV Guide On Screen System continued System continued TV Guide On Screen TV Guide On Screen System
< Record Defaults>
Record Default Options lets you set defaults for the following:
When to start the record event. Choices are 120 minutes early to 120 minutes late, to On time. (Default = On time) When to end the record event. Choices are 120 minutes early to 120 minutes late, to On time. (Default = On time) Recorder choice: Please choose the VCR only. This TV does not provide other devices with a recording feature. Highlight Record Defaults, and press the Menu key to display the Record Default Options menu. Highlight Go to Service Bar to close the menu, change no infor-
mation, and return to the Setup Service Bar.
< Remind Defaults>
Remind Default Options lets you set defaults for the following:
Power On the TV, if Off, when a Reminder is scheduled. Choices are Yes and No.
(Default = No) Automatically tune the TV to the channel (TV must be On), when a Reminder is scheduled. Choices are Yes and No.
(Default = No) When to display the reminder screen. Choices are 30 seconds to 15 minutes early, to 30 seconds to 15 minutes late, to On time.
(Default = 1 min early) Highlight Remind Defaults, and press the Menu key to display the Remind Default Options menu. Highlight Go to Service Bar to close the menu, change no infor-
mation, and return to the Setup Service Bar. When finished, press ENTER to highlight Done. Press ENTER again to close the menu and accept the changes. Highlight Cancel to close the menu, change no information, and return to the highlighted option. Owners Manual 49 TV Guide On Screen System TV Guide On Screen System continued System continued TV Guide On Screen Record And Remind Features And Remind Features Record V < Record >
You can set a show to Record in Listings, Search, and Schedule or change Record settings for a show in Schedule. There are 3 ways to set a show to Record:
W Once records the show one time W Regularly records the show every time the show airs on the same channel and starts at the same 1) Using the Record Button on the Remote time Press the Record button on the remote to record the show Once with current default settings (Start and End recording On Time). Each time you press the Record button, you change the record frequency (but not the default settings) among Once (default), Regularly, Daily, Weekly and then Cancel. Note: The proper Record icon appears on the show tile, as the W Weekly records the show each time the show airs on the same day of the week, on the same channel and starts at the same time W Off (not cancel) keeps the show in the list but will not record this show until the frequency is changed Record button is pressed. W Cancel (no icon displayed)does not record 2) From a Panel Menu Highlight a show, and press Menu to display the Episode Options menu. Highlight Set Recording, and press ENTER to display the Record Options menu. Highlight the Frequency option, and use the left and right arrows to choose among Once, Regularly, Weekly, and Off, as previously described. Recorder choice: Please choose the VCR only. This TV does not provide other devices with a recording feature. Note: Video Window Lock is operated to on or off using PIP button in Listings mode. 50 Plasma TV TV Guide On Screen System continued System continued TV Guide On Screen TV Guide On Screen System When finished, press ENTER to highlight Schedule Recording. Press ENTER again to close the menu. You see a Record icon for the selected frequency next to the show title. Highlight Cancel to close the menu, change no information, and return to the highlighted show. 3) Manual Recording Highlight the Schedule Service label, and press Menu to display the Schedule Options menu. Use the D / E / F / G buttons to move through the options. Use the number or Use the D / E / F / G buttons to change the infor-
mation, as necessary. Highlight New Manual Recording and press ENTER to display the Record Options menu. Current information (i.e., date, start and end times, channel, input) is displayed. Recorder choice: Please choose the VCR only. This TV does not provide other devices with a recording feature. Owners Manual 51 TV Guide On Screen System TV Guide On Screen System continued System continued TV Guide On Screen Use the left and right arrows to choose between Once, Daily, Weekly, and Off, as follows. W Once records the time, channel, input, recorder combi-
nation one time. W Daily records the time, channel, input, recorder combi-
nation Monday through Friday. W Weekly records the time, channel, input, recorder com-
bination once a week on this selected day of the week W Off (not cancel) keeps the time, channel, input, recorder combination in the list without recording until the frequency is changed. When finished, press ENTER to highlight Schedule Recording. Press ENTER again to close the menu. You see a Record icon for the selected frequency next to the show title. Note: Manual recording is listed by channel number. Highlight Cancel to close the menu, change no informa-
tion, and return to the highlighted show. Before a recording begins, a notification screen appears if you are using a Cable box and your TV is On. At that time, you can choose to start or cancel recording. If the TV is not On, the recording occurs as scheduled. If there is no activity for 3 minutes, the notification screen auto-
matically closes and completes the highlighted item. Record Conflict A conflict message appears for the following reasons:
a show set to Record overlaps with any part of another show pre-
viously set to Record, a show set to Record overlaps with a show previously set to auto-
tune Select one of these options:
W record anyway - this show will override an existing show set to Record or auto-tune W don't record this show - cancel the Recording 52 Plasma TV TV Guide On Screen System continued System continued TV Guide On Screen TV Guide On Screen System V < Remind >
You can set a show Reminder in Listings, Search, and Schedule or change Reminder settings for a show in Schedule. There are 2 ways to set a show Reminder:
1) From a Panel Menu Highlight a show, and press Menu to display the Episode Options menu. Highlight Set Reminder, and press ENTER to display the Remind Options menu. Highlight the Frequency option, and use the left and right arrows to choose between:
W Once sets a show reminder one time W Regularly sets a show reminder every time the show airs on the same channel and starts at the same time W Weekly sets a show reminder each time the show airs on the same day of the week, on the same channel and starts at the same time W Off keeps the show in the list but will not remind until the frequency is changed Power On the TV, if Off, when a Reminder is scheduled. Choices are Yes and No. (Default = No) Automatically tune the TV to the channel (TV must be On), when a Reminder is scheduled. Choices are Yes and No. (Default =
No) When to display the reminder screen. Choices are 30 seconds to 15 minutes early, to 30 seconds to 15 minutes late, to On time.
(Default = 1 min early) When finished, press ENTER to highlight Schedule Reminder. Press ENTER again to close the menu. You see a Remind icon for the selected frequency next to the show title. Highlight Cancel to close the menu, change no information, and return to the highlighted show. Owners Manual 53 TV Guide On Screen System TV Guide On Screen System continued System continued TV Guide On Screen 2) Manual Reminder Highlight the Schedule Service label, and press the Menu key to display the Schedule Options menu. Use the D / E / F / G buttons to move through the options. Use the number or D / E / F / G buttons to change the information, as nec-
essary. Highlight New Manual Reminder and press the ENTER key to dis-
play the Remind Options menu. Current information (i.e., date, start and end times, channel, input, frequency, etc.) is displayed. Highlight the Frequency option, and use the F / G buttons to choose among Once, Daily, Weekly, and Off, as follows. W Once sets a show reminder for the time, channel, input, recorder combination one time W Daily reminds for the time, channel, input, recorder com-
bination Monday through Friday W Weekly sets a show reminder for the time, channel, input, recorder combination once a week on this selected day of the week W Off (not cancel) keeps the time, channel, input, destina-
tion combination in the list without reminding until the frequency is changed Power On the TV, if Off, when a Reminder is scheduled. Choices are Yes and No (Default =No). Automatically tune the TV to the channel (TV must be On), when a Reminder is scheduled. Choices are Yes and No (Default = No). When finished, press ENTER to highlight Schedule Reminder. Press ENTER again to close the menu. You see a Remind icon for the selected frequency next to the show title. Note: Manual reminder is listed by channel number. Highlight Cancel to close the menu, change no information, and return to the highlighted show. 54 Plasma TV TV Guide On Screen System continued System continued TV Guide On Screen TV Guide On Screen System Based on your option settings, a notification screen will appear, if your TV is On at the reminder time. You can then choose to hide the reminder, or highlight the show, and press ENTER to tune to the show. If there is no activ-
ity for 3 minutes, the notification screen automatically closes and completes item (hide reminders). the highlighted If you choose Hide Reminders, the window closes for the show or shows, but does not affect other Reminders you set. Note: If more than 2 reminders are set for the same time, arrows appear on the Reminder screen. Use the D / E buttons to view the shows. Remind Conflict A conflict message appears for the following reasons:
a show set with an Auto-Tune Reminder has the same start time as an existing Auto-Tune Reminder. If you are using a cable box, a show set with an Auto-
Tune Reminder overlaps with a Recording already scheduled. Select one of these options:
W auto-tune anyway - this show will override an exist-
ing show set to auto-tune W proceed, no auto-tune - set the show as a Reminder but do not auto-tune W don't set this reminder - cancel the Reminder Owners Manual 55 Operation Operation Operation Screen Setup for PC mode Screen Setup for PC mode
- Be sure to select the RGB-PC/RGB-DTV SET source before operation.
(For RGB-DTV input source, Position and Reset are available.) In RGB-PC input source, settings are available. In DVI-PC input source, Position, Size and Reset are available.
- You can manually adjust picture position and minimize image shaking for the PC input source. Adjustment for screen Position, Size, and Phase Adjustment for screen Position, Size, and Phase 1. Press the ADJUST button and then use D / E button to select POSITION, SIZE, or PHASE. 2. Press ENTER button and then use D / E / F / G buttons to make appropriate adjustments. The PHASE adjustment range is -16 ~ +16. The SIZE adjustment range is -30 ~ +30. 3. Press ENTER button. Note: In HDMI/DVI-PC mode, screen PHASE is not available. Initializing (Reset to original factory values) Initializing (Reset to original factory values)
- To initialize the adjusted values 1. Press the ADJUST button and then use D / E button to select the RESET option. 2. Press ENTER button and then use F / G button to select Yes. 3. Press ENTER button POSITION G SIZE PHASE RESET Adjust Close F D E G Initialize Settings POSITION SIZE PHASE RESET G Adjust Close 56 Plasma TV Operation TTurning the TV On urning the TV On 1. First, connect power cord correctly. At this moment, the TV switches to standby mode. In standby mode to turn TV on, press the POWER, TV/VIDEO, CH (D / E) button on the TV or press the POWER, TV/VIDEO, COMP/RGB/HDMI, CH (+, -), Number (0 ~ 9) button on the TV . 2. Select the viewing source by using TV/VIDEO, COMP/RGB/DVI button on the remote control. This TV is programmed to remember which mode it was last set to, even if you turn the TV off. 3. When finished using the TV, press the POWER button on the remote control. The TV reverts to standby mode. Notes:
If you intend to be away on vacation, disconnect the power plug from the wall power outlet. After turning on the TV, it takes time to be initialized for the TV Guide On Screen System. On-screen Menus Language Selection On-screen Menus Language Selection
- The menus can be shown on the screen in the selected language. First select your language. 1. Press the MENU button and then use D / E button to select the OPTION menu. 2. Press the G button and then use D / E button to select Language. 3. Press the G button and then use D / E button to select your desired language. From this point on, the on-screen menus will be shown in the selected language. 4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. SETUP Aspect Ratio VIDEO AUDIO TIME OPTION LOCK CABLE Cinema Caption Caption/Text Caption Option Language Demo ISM Method Low Power MENU Previous G English Espaol Franais Owners Manual 57 Operation Setup Menu Options Setup Menu Options EZ Scan (Channel Search) EZ Scan (Channel Search)
- Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list.
- Run EZ Scan again after any Antenna/Cable connection changes. 1. Press the MENU button and then use D / E button to select the SETUP menu. 2. Press the G button and then use D / E button to select EZ Scan. 3. Press the ENTER button to begin the channel search. Allow EZ Scan to complete the channel search cycle for TV, DTV, CATV, and CADTV. Manual Scan Manual Scan 1. Press the MENU button and then use D / E button to select the SETUP menu. 2. Press the G button and then use D / E button to select Manual Scan. 3. Press the G button and then use D / E button to select TV, DTV, CATV, and CADTV. 4. Press the G button and then use D / E button to select channel number you want to add or delete. 5. Press the ENTER button to add or delete for the channel number. 6. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. Select channel type and RF-channel number. G TV 20 SETUP EZ Scan VIDEO Manual Scan Channel Edit DTV Signal AUDIO Channel Label TIME OPTION LOCK CABLE Main Input Sub Input Aux. Label Set ID MENU Previous Notes:
This channel number is different from normal channel showed Channel Edit. When Cable Box connect to RF2,3,4 in TV Guide Setup, CATV, CADTV is not working in EZ Scan. 58 Plasma TV Operation Channel Edit Channel Edit
- Create two different types of channel lists in memory: Custom list and Surf"
(Favorite) channel list from the default channel list created from the EZ Scan channel search.
- A custom list can be created by toggling each channel on or off with ENTER button. Once a channel is highlighted, you will be able to see whether the chan-
nel is currently added or deleted by referring to the small window at the top-left corner of the screen. You can create your own Surf channel with all channels. Use the SURF button on the remote control when a channel is highlighted and then you can create your Surf channel. G Selection ( G or ) leads you to the channel edit screen. SETUP EZ Scan VIDEO Manual Scan Channel Edit DTV Signal AUDIO Channel Label TIME OPTION LOCK CABLE Main Input Sub Input Aux. Label Set ID MENU Previous 1. Press the MENU button and then use D / E button to select the SETUP menu. 2. Press the G button and then use D / E button to select Channel Edit. 3. Press the G button. You will now see a screen filled with channel numbers and a preview picture. 4. Use D / E / F / G utton to select a channel and then use the ENTER button to add or delete it. Press SURF to add the channel to the Surf List. 5. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. Note:
When Cable Box connect to RF2,3,4 in TV Guide Setup, CATV, CADTV is not working in EZ Scan. DTV Signal Strength DTV Signal Strength
- Shows how strong your DTV signal is and whether you need to adjust your antenna or digital cable input. The higher the signal strength, the less likely you are to experience picture degradation.
- DTV Signals: When input signals are DTV, CADTV, this function is available. 1. Press the SIGNAL button. 2. View the on-screen signal strength monitor to see the quality of the signal being received. You can also check the DTV Signal strength with the SETUP menu. Owners Manual 59 Operation Setup Menu Options continued Setup Menu Options continued Channel Label Setup Channel Label Setup
- Choose preset labels for your channels.
If a channel label is provided on the signal from the broadcasting station, the TV displays a short name for a channel -
even if you didn't preset a label for the channel. SETUP EZ Scan VIDEO AUDIO TIME OPTION LOCK CABLE Manual Scan Channel Edit DTV Signal Channel Label G Main Input Sub Input Aux. Label Set ID MENU Previous Selection ( G or ) leads you to the channel logo screen. 1. Press the MENU button and then use D / E button to select the SETUP menu. 2. Press the G button and then use D / E button to select Channel Label. 3. Press the G button. You will now see a screen filled with Labels and a preview screen. 4. Use the CH +/- button to select a channel to Label. 5. Use D / E / F / G button to select the appropriate label for the channel, then press ENTER button to set the Label to the selected channel. If you press ENTER button, you will see the channel banner. For example:
Main Picture Source Selection Main Picture Source Selection CADTV 27-1 DOLBY DIGITAL HD CNN
- Changes the picture source so you can watch your off-air TV, cable TV, VCR, DVD, or any other devices that are connected to your TV. 1. Press the MENU button and then use D / E button to select the SETUP menu. 2. Press the G button and then use D / E button to select Main Input. 3. Press the G button and then use D / E button to select the source: Antenna, Cable, Video, Front Video, Component1, Component2, RGB-DTV (or RGB-PC), HDMI/DVI. 4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. Aux. Label Aux. Label 1. Press the MENU button and then use D / E button to select the SETUP menu. 2. Press the G button and then use D / E button to select Aux. Label. 3. Press the G button and then use D / E button to select the source: Video, Front Video, Component1, Component2, RGB, HDMI/DVI. 4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. 60 Plasma TV SETUP EZ Scan VIDEO Manual Scan Channel Edit DTV Signal AUDIO Channel Label TIME OPTION LOCK CABLE Main Input Sub Input Aux. Label Set ID MENU Previous SETUP EZ Scan VIDEO Manual Scan Channel Edit DTV Signal AUDIO Channel Label TIME OPTION LOCK CABLE Main Input Sub Input Aux. Label Set ID MENU Previous Antenna Cable Video G Front Video Component1 Component2 RGB-DTV HDMI/DVI Video Cable Box Front Video VCR Component1 DVD Component2 Set Top Box G RGB PC HDMI/DVI Game VVideo Menu Options ideo Menu Options EZ Picture EZ Picture
- EZ Picture adjusts the TV for the best picture appearance. Select the preset value in the EZ Picture menu based on the program category. Operation
- When adjusting Video menu options (contrast, brightness, color, sharpness, tint, and color temperature) manually, EZ Picture automatically changes to Off.
- Daylight, Normal, Night Time, Movie, Video Game, and Sports settings are preset for optimum picture quality at the factory and are not adjustable. 1. Press the VIDEO button repeatedly to select the picture appearance setup option as shown below:
Off (your own settings), Daylight, Normal, Night Time, Movie, Video Game, and Sports. You can also use the VIDEO menu to adjust EZ Picture. 2. Press the EXIT button to save and return to TV viewing. Manual Picture Control (Off option) option) Manual Picture Control (
- Adjust the picture appearance to suit your preference and viewing situations. 1. Press the MENU button and then use D / E button to select the VIDEO menu. 2. Press the G button and then use D / E button to select the desired picture option
(Contrast, Brightness, Color, Sharpness, or Tint ). 3. Press the G button and then use F / G button to make appropriate adjustments. 4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. SETUP VIDEO EZ Picture Contrast Brightness Color AUDIO Sharpness 85 50 50 50 G TIME Tint Color Temperature 0 R G OPTION Video Preset LOCK CABLE MENU Previous Color TTemperature Control emperature Control Color
- Choose one of three automatic color adjustments. Set to warm to enhance hotter colors such as red, or set to cool to see less intense colors with more blue. 1. Press the MENU button and then use D / E button to select the VIDEO menu. 2. Press the G button and then use D / E button to select Color Temperature . 3. Press the G button and then use D / E button to select either Cool, Medium or Warm. 4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. SETUP VIDEO EZ Picture Contrast Brightness Color AUDIO Sharpness TIME OPTION LOCK CABLE Tint Color Temperature G Cool Video Preset Medium Warm MENU Previous Owners Manual 61 Operation XDXD
- XD is LG Electronics unique picture improving technology to display a real HD source through an advanced digital signal processing algorithm.
- When selecting EZ Picture options (Daylight, Normal, Night Time, Movie, Video Game, and Sports), XD is automatically change to On. 1. Press the MENU button and then use D / E button to select the PICTURE menu. 2. Press the G button and then use D / E button to select XD. 3. Press the G button and then use D / E button to set On or Off. 4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. SETUP VIDEO EZ Picture Contrast Brightness Color AUDIO Sharpness TIME OPTION LOCK CABLE Tint Color Temperature Video Preset G Off On MENU Previous VVideo Preset ideo Preset
- Use to quickly reset all the Video menu options to their original factory preset values. 1. Press the MENU button and then use D / E button to select the VIDEO menu. 2. Press the G button and then use D / E button to select Video Preset . 3. Press the G button to reset the Video menu options to original values. SETUP VIDEO EZ Picture Contrast Brightness Color AUDIO Sharpness TIME Tint Color Temperature OPTION Video Preset G Selection ( G or ) presets the video configuration. LOCK CABLE MENU Previous 62 Plasma TV Operation Audio Menu Options Audio Menu Options Audio Language Audio Language
- Other languages may be available if a digital signal is provided by the broad-
casting station. 1. Press the MENU button and then use D / E button to select the AUDIO menu. 2. Press the G button and then use D / E button to select Audio Language. 3. Press the G button and then use D / E button to select: English, Spanish, or French. 4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. EZ SoundRite EZ SoundRite
- Scans for changes in sound level during commercials, then adjusts the sound to match the specified audio level. SoundRite makes sure that the volume level remains consistent whether you are watching a commercial or a regular TV program. 1. Press the MENU button and then use D / E button to select the AUDIO menu. 2. Press the G button and then use D / E button to select EZ SoundRite. 3. Press the G button and then use D / E button to select On or Off. 4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. EZ Sound EZ Sound English Spanish French SETUP Audio Language G VIDEO AUDIO TIME OPTION LOCK CABLE EZ SoundRite EZ Sound Balance Treble Bass Front Surround TV Speaker MENU Previous Off On SETUP Audio Language EZ SoundRite G VIDEO AUDIO TIME OPTION LOCK CABLE EZ Sound Balance Treble Bass Front Surround TV Speaker MENU Previous
- EZ Sound lets you enjoy the best sound without any special adjustment because the TV sets the appropriate sound options based on the program content.
- When adjusting sound options (treble, bass, and front surround) manually, EZ Sound automatically switches Off.
- Normal, Stadium, Theater, and Music are preset for good sound quality at the factory and are not adjustable. 1. Press the SOUND button repeatedly to select the appropriate sound setup as shown below:
Off (your own settings), Normal, Stadium, Theater, and Music. You can also adjust EZ Sound in the AUDIO menu. 2. Press EXIT button to save and return to TV viewing. Manual Sound Control (Off option) option) Manual Sound Control (
- Adjust the sound to suit your taste and room situations. 1. Press the MENU button and then use D / E button to select the AUDIO menu. 2. Press the G button and then use D / E button to select the desired sound option
(Balance, Treble, or Bass). 3. Press the G button and then use F / G button to make appropriate adjustments. 4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. L R G SETUP Audio Language EZ SoundRite VIDEO AUDIO TIME OPTION LOCK CABLE EZ Sound Balance Treble Bass Front Surround TV Speaker 0 50 50 MENU Previous Owners Manual 63 Operation Front Surround Front Surround
is a trademark of SRS Labs, Inc.
- TruSurround XT technology is incorporated under license from SRS Labs, Inc.
- Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. 1. Press the MENU button and then use D / E button to select the AUDIO menu. 2. Press the G button and then use D / E button to select Front Surround. 3. Press the G button and then use D / E button to select Off, 3D EchoSound System or SRS (Sound Retrieval System) TruSurround XT.. 3D EchoSound System Creates a stunning simulated stereo effects from any mono sound and a real-
istic three-dimensional sound with a very wide and deep sound stage into stereo sound. SRS TruSurround XT Takes advantage of any multi-channel format without needing to add extra speakers or equipment. Dialog clarity, bass enrichment, and the addition of stereo audio enhancement that produces an immersive sound experience from standard stereo material. 4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. TV Speakers On/Off Setup f Setup TV Speakers On/Of SETUP Audio Language EZ SoundRite VIDEO AUDIO TIME EZ Sound Balance Treble Bass Front Surround G Off OPTION TV Speaker LOCK CABLE MENU Previous 3D EchoSound System SRS TruSurround XT
- Turn TV speakers off if using external audio equipment. Feature turns the TV Speakers option On or Off. 1. Press the MENU button and then use D / E button to select the AUDIO menu. 2. Press the G button and then use D / E button to select TV Speaker. 3. Press the G button and then use D / E button to select On or Off. 4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. Stereo/SAP Broadcasts Setup Broadcasts Setup Stereo/SAP SETUP Audio Language EZ SoundRite VIDEO AUDIO TIME OPTION LOCK CABLE EZ Sound Balance Treble Bass Front Surround TV Speaker G Off On MENU Previous
- This TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accompanies the stereo program; if the station transmits an additional sound signal as well as the original one.
- When having selected Stereo or SAP button on the remote control, this TV can only receive the signal in case that the TV sta-
tion transmits the proper signals.
- Mono sound is automatically received if the broadcast is only in Mono; even though Stereo or SAP has been selected.
- Select Mono if you want to listen to the mono sound in remote fringe areas during stereo/SAP broadcasting.
- Stereo or SAP can be received in Analog channel. 1. Use the SAP button to select your desired MTS mode in analog signal. Each time you press the SAP button, Mono, Stereo, or SAP appear in turn. If other languages available on the digital signal, select them with the SAP button. 2. Press EXIT button to save and return to TV viewing. 64 Plasma TV Operation TTime Menu Options ime Menu Options Auto Clock Setup Auto Clock Setup
- The time is set automatically from a digital channel signal.
- The digital channel signal includes information for the current time provided by the broadcasting station.
- Set the clock manually, if the current time is set incorrectly by the auto clock function.
- When you set up TV guide on screen system, Auto Clock menu is not selected. 1. Press the MENU button and then use D / E button to select the TIME menu. 2. Press the G button and then use D / E button to select Auto Clock. 3. Press the G button and then use D / E button to select On. 4. Press the G button and then use D / E button to select your viewing area time zone: Eastern, Central, Mountain, Pacific, Alaska, or Hawaii. 5. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. Manual Clock Setup Manual Clock Setup If current time setting is wrong, reset the clock manually.
- When you set up TV guide on screen system, Manual Clock menu is not worked. 1. Press the MENU button and then use D / E button to select the TIME menu. 2. Press the G button and then use D / E button to select Manual Clock. 3. Press the G button and then use F / G button to select either the year, date, or time option. Once selected, use the D / E button to set the year, date, and time options. 4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. Off On Time Zone Eastern Daylight Auto Saving SETUP Auto Clock G VIDEO AUDIO TIME OPTION LOCK CABLE Manual Clock Off Timer On Timer Sleep Timer Auto Off MENU Previous SETUP Auto Clock Manual Clock G Year - - - -
VIDEO AUDIO TIME OPTION LOCK CABLE Off Timer On Timer Sleep Timer Auto Off Date - - / - -
Time - - : - - - -
MENU Previous On/Offf TTimer Setup imer Setup On/Of
- Timer function operates only if current time has been set.
- Off-Timer function overrides On-Timer function if they are set both set to the same time.
- The TV must be in standby mode for the On-Timer to work.
If you do not press any button within 2 hours after the TV turns on with the On Timer function, the TV will automatically revert to standby mode. 1. Press the MENU button and then use D / E button to select the TIME menu. 2. Press the G button and then use D / E button to select Off Timer or On Timer. 3. Press the G button and then use D / E button to select On. To cancel On/Off timer function, select Off. 4. Press the G button and then use D / E button to set the hour. 5. Press the G button and then use D / E button to set the minutes. 6. For only On timer function Press the G button and then use D / E button to select the channel at turn-on. Press the G button and then use D / E button to set the sound level at turn-on. 7. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. SETUP Auto Clock VIDEO AUDIO TIME OPTION LOCK CABLE Manual Clock Off Timer On Timer Sleep Timer Auto Off MENU Previous G Off On Time 6 : 30 AM Ch. TV 2-0 Vol 17 Owners Manual 65 Operation Sleep TTimer imer Sleep
- The Sleep Timer turns the TV off at the preset time. Note that this setting is cleared when the TV is turned off.
- You can also set up the Sleep Timer in the TIME menu. 1. Press the TIMER button repeatedly to select the number of minutes. First the Off option appears on the screen, followed by the following sleep timer options: 10, 20, 30, 60, 90, 120, 180, and 240 minutes. 2. When the number of minutes you want is displayed on the screen, press the ENTER button. The timer begins to count down from the number of minutes selected. 3. To check the remaining minutes before the TV turns off, press the TIMER button once. 4. To cancel the Sleep Timer, press the TIMER button repeatedly to select Off. Auto Offf Auto Of
If set to on and there is no input signal, the TV turns off automatically after 10 minutes. 1. Press the MENU button and then use D / E button to select the TIME menu. 2. Press the G button and then use D / E button to select Auto Off. 3. Press the G button and then use D / E button to select On or Off. 4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. SETUP Auto Clock VIDEO AUDIO TIME OPTION LOCK CABLE Manual Clock Off Timer On Timer Sleep Timer Auto Off G Off On MENU Previous 66 Plasma TV Option Menu Features Option Menu Features Aspect Ratio Control Aspect Ratio Control Operation
- Lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV with a 16:9 ratio picture format. When you receive an analog picture with a 4:3 aspect ratio on your 16:9 TV, you need to specify how the picture is to be dis-
played. If you are viewing a picture with a 16:9 aspect ratio, you cant use the Horizon aspect ratio option.
- Horizon aspect ratio is not available for Component 1-2 (720p/1080i)/RGB-DTV (720p/1080i)/HDMI/DVI-DTV
(720p/1080i)/DTV(720p/1080i) input source.
- RGB-PC/DVI-PC input source use 4:3 or 16:9 aspect ratio.
- Note: If a fixed image is displayed on the screen for a long time, that fixed image may become imprinted on the screen and remain visible. 1. Press the RATIO button repeatedly to select the desired picture format. You can also adjust Aspect Ratio in the OPTION menu. Set By Program Selects the proper picture proportion to match the sources image. (4:3 4:3, 16:9 16:9) 4:3 Choose 4:3 when you want to view a picture with an original 4:3 aspect ratio, with black bars appearing at both the left and right sides. 16:9 Choose 16:9 when you want to adjust the picture horizontally, in a linear proportion to fill the entire screen. Horizon Choose Horizon when you want to adjust the picture in a non-linear proportion, that is, more enlarged at both sides, to create a spectacular view. Zoom 1 Choose Zoom 1 when you want to view the picture without any alteration. However, the top and bottom portions of the picture will be cropped. Zoom 2 Choose Zoom 2 when you want the picture to be altered, both vertically extended and cropped. The picture tak-
ing a halfway trade off between alteration and screen coverage. Cinema Zoom Choose Cinema Zoom when you want to enlarge the picture in correct proportion. Note: When enlarging or reducing the picture, the image may become distorted. You can adjust the enlarge proportion of Cinema Zoom using D / E button. The adjustment range is 1~16. Cinema Mode Setup SETUP Aspect Ratio
- Set up the TV for the best picture appearance for viewing movies. 1. Press the MENU button and then use D / E button to select the OPTION menu. 2. Press the G button and then use D / E button to select Cinema. 3. Press the G button and then use D / E button to select On or Off. 4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. VIDEO AUDIO TIME OPTION LOCK CABLE G Off On Cinema Caption Caption / Text Caption Option Language Demo ISM Method Low Power MENU Previous Owners Manual 67 Owners Manual 67 Operation Caption Caption 1. Press the MENU button and then use D / E button to select the OPTION menu. 2. Press the G button and then use D / E button to select Caption. 3. Press the G button and then use D / E button to select On or Off. 4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. Caption/Textext Caption/T Analog Broadcasting System Captions G Off On SETUP Aspect Ratio VIDEO AUDIO TIME OPTION LOCK CABLE Cinema Caption Caption / Text Caption Option Language Demo ISM Method Low Power MENU Previous
- Select a caption mode for displaying captioning information if provided on a program.
- Analog caption displays information at any position on the screen usually the program's dialog.
- Text displays information, usually at the bottom position and is used for a data service, generally not program related.
- Caption/Text, if provided by the broadcaster, would be available for both digital and analog channels on the Antenna/Cable.
- This TV is programmed to remember the caption/text mode it was last set to, when you turn the power off. 1. Use the CC button repeatedly to select Caption CC1, CC2, CC3, CC4, Text1, Text2, Text3, or Text4. EZ Mute shows the selected captions option (if available on program) when the TV sound is muted
.2. Press EXIT button to save and return to TV viewing. You can also use the OPTION menu to select Caption/Text. 1. Press the MENU button and then use D / E button to select the OPTION menu. 2. Press the G button and then use D / E button to select Caption/Text. 3. Press the G button and then use D / E button to select caption: CC1, CC2, CC3, CC4, Text1, Text2, Text3, or Text4. CAPTION The term for the words that scroll across the bottom of the TV screen; usually the audio portion of the program provided for the hearing impaired. TEXT The term for the words that appear in a large black frame and almost cover the entire screen; usually messages provided by the broadcaster. 4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. SETUP Aspect Ratio VIDEO Cinema Caption Caption / Text G AUDIO Caption Option TIME OPTION LOCK CABLE Language Demo ISM Method Low Power MENU Previous CC 1 CC 2 CC 3 CC 4 Text 1 Text 2 Text 3 Text 4 Digital Broadcasting System Captions
- Choose the language you want the DTV/CADTV Captions to appear in.
- Languages can be chosen for digital sources only if they are included on the program. 1. Press the MENU button and then use D / E button to select the OPTION menu. 2. Press the G button and then use D / E button to select Caption/Text. 3. Press the G button and then use D / E button to select available caption lan-
guages: English, Spanish, or French. 4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. SETUP Aspect Ratio VIDEO Cinema Caption Caption / Text G AUDIO Caption Option TIME OPTION LOCK CABLE Language Demo ISM Method Low Power MENU Previous English Spanish French 68 Plasma TV Option Menu Features continued Option Menu Features continued Caption Option Caption Option
- Customize the DTV/CADTV captions that appear on your screen. 1. Press the MENU button and then use D / E button to select the OPTION menu. 2. Press the G button and then use D / E button to select Caption Option. 3. Press the G button and then use F / G button to select Custom. 4. Use D / E button to customize the Style, Font, etc., to your preference. A pre-
view icon is provided at the bottom of the screen, use it to see the caption lan-
guage. Size: Set the size the words will appear in. Font: Select a typeface for the words. Text Color: Choose a color for the text. Text Opacity: Specify the opacity for the text color. Bg (Background) Color: Select a background color. Bg (Background) Opacity: Select the opacity for the background color. Edge Type: Select an edge type. Edge Color: Select a color for the edges. 5. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. Operation SETUP Aspect Ratio VIDEO AUDIO TIME OPTION LOCK CABLE Cinema Caption Caption/Text Caption Option G Language Demo ISM Method Low Power MENU Previous Style Custom Size A Standard Font Font 0 Text Color White Text Opacity Solid Bg Color Black Bg Opacity Solid Edge Type None Edge Color Black Demo Demo
- EZ Demo Use to scan the features and menu options available on your TV.
- XD Demo Use to see the difference between XD Demo On and XD Demo Off. 1. Press the MENU button and then use D / E button to select the OPTION menu. 2. Press the G button and then use D / E button to select Demo. 3. Press the G button and then use D / E button to select EZ Demo or XD Demo. 4. Press the G button to start EZ Demo or XD Demo. Press EXIT button to stop EZ Demo or XD Demo. SETUP Aspect Ratio VIDEO AUDIO TIME OPTION LOCK CABLE Cinema Caption Caption/Text Caption Option Language Demo ISM Method Low Power MENU Previous G EZ Demo Demo Owners Manual 69 Operation Option Menu Features continued Option Menu Features continued ISM (Image Sticking Minimization) Method ISM (Image Sticking Minimization) Method
- A frozen still picture from a PC/video game displayed on the screen for prolonged periods will result in an ghost image remaining; even when you change the image. Avoid allowing any fixed image to remain on the TV's screen for a long period of time. 1. Press the MENU button and then use D / E button to select the OPTION menu. 2. Press the G button and then use D / E button to select ISM Method. 3. Press the G button and then use D / E button to select either Normal, White wash, Orbiter or Inversion. Normal If image sticking is never a problem, ISM is not necessary - set to Normal. White wash White Wash removes permanent images from the screen. Note: An excessive permanent image may be impossible to clear entirely with White Wash. To return to normal viewing, press the any button. Orbiter Orbiter may help prevent ghost images. However, it is best not to allow any fixed image to remain on the screen. To avoid a permanent image on the screen, the image will move once per minute: Right Right Downside Downside Left Left Upside Upside. Inversion Inversion will automatically invert the plasma display panel color every 30 min-
utes. 4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. SETUP Aspect Ratio VIDEO AUDIO TIME OPTION LOCK CABLE Cinema Caption Caption/Text Caption Option Language Demo ISM Method Low Power MENU Previous G Normal White Wash Orbiter Inversion 70 Plasma TV Low Power Low Power
- Low power reduces the plasma display power consumption. 1. Press the MENU button and then use D / E button to select the OPTION menu. 2. Press the G button and then use D / E button to select Low power. 3. Press the G button and then use D / E button to select On or Off. When you select On, the screen darkens. 4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. Operation SETUP Aspect Ratio VIDEO AUDIO TIME OPTION LOCK CABLE Cinema Caption Caption / Text Caption Option Language Demo ISM Method Low Power G Off On MENU Previous Owners Manual 71 Split Zoom (DTV 720p, or 1080i mode only) Split Zoom (DTV 720p, or 1080i mode only)
- Enlarges the picture with correct proportions.
- When enlarging the picture, the image may become distorted. 1. Press the ZOOM button in DTV 720p, or 1080i modes. 2. Use the D / E / F / G buttons to select the screen split zoom section. 3. To return to normal viewing, press the ZOOM button again. F F F F Owners Manual 71 Operation Lock Menu Options Lock Menu Options Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcasting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by the type of program and by the categories chosen to be blocked. It is also possible to block all program viewing for a time period. To use this function, the following must be done :
1. Set ratings and categories to be blocked. 2. Specify a password 3. Enablethe lock V-Chip rating and categories Rating guidelines are provided by broadcasting stations. Most television programs and television movies can be blocked by TV Rating and/or Individual Categories. Movies that have been shown at the theaters or direct-to-video movies use the Movie Rating System (MPAA) only. Ratings for Movies previously shown in theaters:
Movie Ratings :
Blocking Off G PG PG-13 R NC-17 X If you set PG-13 : G and PG movies will be available , PG-13, R, NC-17 and X will be blocked.
(Permits all programs)
(General audience)
(Parental guidance suggested)
(Parents strongly cautioned)
(Restricted)
(No one 17 and under admitted)
(Adult only) Ratings for Television programs including made-for-TV movies :
(General audience)
(Parental guidance suggested)
(Parents strongly cautioned)
(Mature audience only)
(All children)
(Children 7 years older) TV-G TV-PG TV-14 TV-MA TV-Y TV-Y7 TV Rating Children:
Age Fantasy Violence TV Rating General:
Age Dialogue - sexual dialogue Language - adult language Sex - sexual situations Violence Aux. Block Video, Front Video Component 1, 2 RGB, HDMI/DVI
(On, Off)
(On, Off)
(On, Off)
(applies to TV-Y, TV-Y7)
(applies to TV-Y7)
(applies to TV-G, TV-PG, TV-14, TV-MA)
(applies to TV-PG, TV-14)
(applies to TV-PG, TV-14, TV-MA)
(applies to TV-PG, TV-14, TV-MA)
(applies to TV-PG, TV-14, TV-MA) 72 Plasma TV Operation Parental Lock Setup Parental Lock Setup
- Set up blocking schemes to block specific channels, ratings, and external viewing sources.
- A password is required to gain access to this menu if the Lock System is turned on. Off On SETUP Lock System G VIDEO AUDIO TIME OPTION LOCK CABLE Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Aux. Block MENU Previous 1. Press the MENU button and then use D / E button to select the LOCK menu. Then, press the G button If Lock is already set, enter the password as requested. The TV is set up with the initial password 0-0-0-0. 2. Use the D / E button to choose from the following Lock Menu options. Once the option is selected, change the settings to your preference. Lock System: Activates or disables the blocking scheme you set up previ-
ously. Set Password: Change the password by inputting a new password twice. Movie Rating (MPAA): Blocks movies according to the movie ratings lim-
its specified, so children cannot view certain movies. You can set the rat-
ings limit by blocking out all the movies with the ratings above a specified level. Keep in mind that the movie ratings limit only applies to movies shown on TV, not TV programs, such as soap operas. TV Rating-Children: Prevents children from watching certain children's TV programs, according to the ratings limit set. The children rating does not apply to other TV programs. Unless you block certain TV programs intend-
ed for mature audiences in the TV Rating - sub menu, your children can view those programs. TV Rating-General: Based on the ratings, blocks certain TV programs that you and your family do not want to view. Aux. Block: Enables you to select a source to block from the external source devices you have hooked up. 3. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. Note:
If you ever forget your password, key in 7, 7, 7, 7 on the remote control. Owners Manual 73 Operation CableCARD Function Function CableCARD
* In this manual, the OSD (On Screen Display) may be different from your TVs because it is just example to help the TV operation. Cable menu options Cable menu options
- The Cable sub menu displays when inserting the CableCARDTM to the TV.
- The CableCARDTM type is Motorola, Scientific Atlanta (SA), or SCM etc. The OSD (On screen display) is different from your TV according to your CableCARDTM type. 1. Press the MENU button and then use D / E button to select the CABLE menu. 2. Press the G button and then use D / E button to select your desired item. 3. Press the G button. 5. Press EXIT button to return to TV viewing. In case of Scientific Atlanta CableCARD SETUP SA CableCARD Diag Screen G SA CableCARD/Host ID Screen VIDEO AUDIO TIME OPTION LOCK CABLE MENU i.e) CableCARD/ Host ID Screen CableCARD Message In order to start service for this device, please contact customer service at Ph#: 1-866-303-0422 CableCARD(tm): 0-010-405-698-001 HOST ID: 0-080-000-000-226 EXIT Exit As shown, the pairing num-
ber means your TV and CableCARDTM ID. For fur-
ther information regarding cable TV service, contact your local cable TV service provider(s). Scrambled channel Scrambled channel
Insert the CableCARDTM. If you do it at first, it takes about 1 minute to exchange the data between the TV and the CableCARDTM. Then, TV screen displays as shown right.
- Let your cable TV service provider know CableCARDTM ID and Host ID.
If your cable TV service provider is registered CableCARDTM ID and Host ID, you can watch the premium or high value channel. If you ever registered to the cable TV service provider, you can watch the pre-
mium or high value channel without a message.
CableCARD Message In order to start cable service for this device, please contact SuperVision Cable at 1-800-555-8888 POD ID: 7-561-034-449-009 Host ID: 0-100-331-784-018 EXIT Exit Please call your operator and report an invalid CableCARDTM.
If the certificate dont match between the TV and the CableCARDTM, the OSD (On screen display) displays as shown left. 74 Plasma TV Cable Channel List Cable Channel List 1. 3. Operation G Selection ( G or ) leads you to the channel edit screen. SETUP EZ Scan VIDEO Manual Scan Channel Edit DTV Signal AUDIO Channel Label TIME OPTION LOCK CABLE Main Input Sub Input Aux. Label MENU Prev. 2. 4. 1. If you enter the Channel Edit after running the EZ Scan, you can see the cable channel list. 2. Inserting the CableCARDTM. Then, the TV receive a new cable channel list. At this time, it takes about 2~3 minutes.
(Occasionally more than that time). Note:
As data gathering of CableCARDTM, it may make a noise by fan in standby mode. Emergency Alert Message Alert Message Emergency
If an emergency situation occur during watching the TV, you can receive a message from cable TV service provider(s).
- When receiving an emergency message, the message is displayed on the screen as shown below or the channel is changed automatically to a channel that maintains the emergency message. The message automatically disap-
peared. Emergency Action Notification Hurricane will be coming!!!
Owners Manual 75 Operation Remote Control Remote Control PIPPIP (Picture-In-Picture) / POP
(Picture-In-Picture) / POP / T/ Twin Picture win Picture
- PIP lets you view 2 different inputs (sources) on your TV screen at the same time. One source will be large, and the other source will show a smaller inset image.
- Twin Picture mode splits the screen into 2, allowing 2 picture sources to be shown on the TV screen at the same time. Each source is given half the screen. If you set the block/rating for Lock menu options in PIP/Twin Picture mode, Rating Blocked doesnt display on screen.
WW WWatching PIP/POP/T atching PIP/POP/Twin Picture win Picture Press the PIP button to access the sub picture. Each press of PIP changes the PIP options as shown below. PIP Mode POP Mode Twin Picture Mode F D E TV 2-0 TV 4-0 TV 6-0 PIP Off WW Selecting an Input Signal Source for PIP/T Selecting an Input Signal Source for PIP/Twin Picture win Picture Use the PIP INPUT button to select the input source for the sub picture. Each press of PIP INPUT button changes the PIP source. You can also select sources for the Sub Input in the SETUP menu. Main Picture Source Available Sub Picture Sources DTV Analog Analog, Video, and Front Video DTV, Analog, Video, and Front Video WW Swapping the PIP Swapping the PIP/T/Twin Picture win Picture Repeatedly, use the SWAP button to switch the main and sub pictures. Component 1, Component 2, RGB-PC (or RGB-DTV), HDMI/DVI input sources for the main picture cant be used to swap the main and sub pictures. Main Picture Sub Picture Main Picture Sub Picture TV Program selection for PIP WW TV Program selection for PIP 1. Press the PIP button. 2. Select the Antenna or Cable option on the Sub input menu or with the PIP INPUT button. Use the PIPCH+ /
PIPCH- button to select a channel for the sub picture.
(You cant select DTV for main and sub picture simultaneously). 76 Plasma TV Operation WW Moving the PIP Moving the PIP sub picture sub picture In PIP mode, press the D / E / F / G button to move the sub picture to a different location on the screen. WW Adjusting Main and Sub Picture Sizes for Adjusting Main and Sub Picture Sizes for TTwin Picture win Picture Use the D / E / F / G button to change main and sub picture sizes in Twin Picture mode. i.e) If screen is adjusted to the maximal size, the large screen is filled with entire screen vertically as shown. WW POPPOP (Picture-out-of-Picture: Channel Scan)
(Picture-out-of-Picture: Channel Scan)
- Use POP to search the programs of all the memorized channels one-by-one on the 3 PIP screen display,
(while the main picture source remains the current channel). The pictures of all the programmed channels are searched with the 3 POP screen.
- Notes:
Run EZ Scan channel search before using POP mode. When Sub pictures are changed from the TV/DTV to CATV/CADTV in POP mode, it may make a noise from the Tuner switch. 1. Press the PIP button to activate the POP mode while in PIP mode. Channel selection: Use F button to enlarge the selected channel being searched on the PIP screen to shift it for viewing on the Main screen. PIP selection: Use D / E button to select one of 3 PIP screen pictures in POP mode. When watching TV on Main picture, TV or DTV on Sub pictures are in channel scanning. However, when watching DTV on Main picture, only TV on Sub picture is in channel scanning. 2. Press the EXIT button to cancel POP mode. F D E TV 2-0 TV 4-0 TV 6-0 Owners Manual 77 Operation Information Information Operation: Watching TV/DTV/CATV/CADTV Watching Video, Front Video Watching IEEE 1394 In Component1, Component2, RGB, HDMI/DVI modes, INFO button is not working. Function: Show the present screen information. On Watching with the upper Input signal, press the INFO button. Press the INFO button or EXIT button to exit. A: Banner information, Refer to the
<Channel Banner>. B: Program title C: Day, Month, Year D: Program start time E: Program finish time F: Show the prosessing rate G: Present time H: Added information. Refer to the icon explanation. 4 : 3 16 : 9 Screen Ratio of Input Signal 4:3 Screen Ratio of Input Signal 16:9 480i 480p 720p 1080i Resolution of Input Signal 720x480i Resolution of Input Signal 720x480p Resolution of Input Signal 1280x720p Resolution of Input Signal 1920x1080i Multilingual : Input Signal have over two Audio infor-
mation. Press the SAP button to select wanted Audio. Caption: Input Signal have over one Close service. Press the CC button to select wanted Closed caption. CC Input Signal have rating information . Refer to the
<Lock Menu>. D (Dialogue), L (Language), S (Sex), V (Violence), FV
(Fantasy Violence) B C D F E G A Sophies Choice 3:11AM Tue, Oct 7, 2004 7:00PM 9:00PM CC Caption 4 : 3 480i TV-PG D L S V TV 6-0 MONO STEREO CNBC H 78 Plasma TV Operation EZ Mute EZ Mute
- Nothing to do with Caption on/Off using Mute button, the mode selected Caption/Text is to be displayed.
- When you repeatedly press the Mute button, the screen is displayed in turn. (Refer to the lower picture) Mute EZ Mute 24 Note:
EZ Mute only operates in DTV/Analog/Video/Front Video/IEEE1394. Owners Manual 79 External Control Device Setup External Control Device Setup External Control Device Setup
- Connect the RS-232C input jack to an external control device (such as a computer or an A/V control system) and control the Monitors functions externally.
- Connect the serial port of the control device to the RS-232C jack on the Monitor back panel.
- RS-232C connection cables are not supplied with the Monitor. RS-232C Setup RS-232C Setup HDMI /
DVI(VIDEO) AUDIO INPUT DIGITAL AUDIO(OPTICAL) DVI COMPONENT2 VIDEO INPUT Cable ANTENNA CABLE AC INPUT PC TType of Connector; D-Sub 9-Pin Male ype of Connector; D-Sub 9-Pin Male No. Pin Name 1 2 3 4 5 6 7 8 9 No connection RXD (Receive data) TXD (Transmit data) DTR (DTE side ready) GND DSR (DCE side ready) RTS (Ready to send) CTS (Clear to send) No Connection RS-232C Configurations RS-232C Configurations 1 5 9 6 7-Wire Configurations
(Standard RS-232C cable) 3-Wire Configurations
(Not standard) PC 2 3 5 4 6 7 8 RXD TXD GND DTR DSR RTS CTS PDP 3 2 5 6 4 8 7 TXD RXD GND DSR DTR CTS RTS PC 2 3 5 4 6 7 8 RXD TXD GND DTR DSR RTS CTS PDP 3 2 5 4 6 7 8 TXD RXD GND DTR DSR RTS CTS D-Sub 9 D-Sub 9 D-Sub 9 D-Sub 9 80 Plasma TV External Control Device Setup Set ID Set ID Use this function to specify a monitor ID number. Refer to Real Data Mapping. See page 82. 1. Press the MENU button and then use D / E button to select the SETUP menu. 2. Press the G button and then use D / E button to select SET ID. 3. Press the G button and then use D / E button to adjust SET ID to choose the desired monitor ID number. The adjustment range of SET ID is 1 ~ 99. 4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu. SETUP EZ Scan VIDEO Manual Scan Channel Edit DTV Signal AUDIO Channel Label TIME OPTION Main Input Sub Input Aux. Label SET ID G LOCK MENU Previous 1 Communication Parameters Communication Parameters Baud rate : 9600 bps (UART) Data length : 8 bits Parity : None
* Use a crossed (reverse) cable. Stop bit : 1 bit Communication code : ASCII code TTransmission / Receiving Protocol ransmission / Receiving Protocol Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
* [Command 1]: First command to control the set. (j or k)
* [Command 2]: Second command to control the set.
* [Set ID]: You can adjust the set ID to choose desired monitor ID number in Setup menu. Adjustment range is 1
~ 99. When selecting Set ID 0, every connected the TV is controlled. Set ID is indicated as decimal
(1~99) on menu and as Hexa decimal (0x0~0x63) on transmission/receiving protocol.
* [DATA]: To transmit command data. Transmit FF data to read status of command.
* [Cr]: Carriage Return ASCII code 0x0D
* [ ]: ASCII code space (0x20) OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]
* The Monitor transmits ACK (acknowledgement) based on this format when receiving normal data. At this time, if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the data of the PC computer. Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
* The Monitor transmits ACK (acknowledgement) based on this format when receiving abnormal data from non-viable functions or communication errors. Data 1: Illegal Code 2: Not supported function 3: Wait more time Command Reference List Command Reference List COMMAND 1 COMMAND 2 DATA
(Hexadecimal) k 01. Power k 02. Input Select k 03. Aspect Ratio k 04. Screen Mute k 05. Volume Mute k 06. Volume Control k 07. Contrast k 08. Brightness k 09. Color k 10. Tint k 11. Sharpness 12. OSD Select k 13. Remote Control Lock Mode k k 14. PIP/Twin 15. PIP Position k k 16. Treble k 17. Bass k 18. Balance k 19. Color Temperature 20. PIP Input Source k j 21. ISM Method j 22. White Wash j 23. Orbiter Time Setting 24. Orbiter Pixel Setting j a b c d e f g h i j k l m n q r s t u y p q r s 0 ~ 1 0 ~ 8 0 ~ 15 0 ~ 1 0 ~ 1 0 ~ 64 0 ~ 64 0 ~ 64 0 ~ 64 0 ~ 64 0 ~ 64 0 ~ 1 0 ~ 1 0 ~ 3 0 ~ 3 0 ~ 64 0 ~ 64 0 ~ 64 0 ~ 2 0 ~ 3 0 ~ 2 0 ~ 1 1 ~ FE 1 ~A COM-
MAND 1 COM-
MAND 2 DATA 0 DATA 1 DATA 2 DATA 3
(Hexadecimal)
(Hexadecimal)
(Hexadecimal)
(Hexadecimal) 25. Channel Tuning m a 26. Channel Add/Del m b m c 27. Key 01 ~ 87 00 ~ 01 01 ~ 87 00 ~ FE 00 ~ FF Owners Manual 81 External Control Device Setup 01. Power (Command2:a) G To control Power On/Off of the Monitor. Transmission
[k][a][ ][Set ID][ ][Data][Cr]
Data 0 : Power Off Acknowledgement
[a][ ][Set ID][ ][OK][Data][x]
1 : Power On 05. Volume Mute (Command2:e) G To control volume mute on/off. You can also adjust mute using the MUTE button on remote control. Transmission
[k][e][ ][Set ID][ ][Data][Cr]
Data 0 : Volume mute off (Volume on) 1 : Volume mute on (Volume off)
* In a like manner, if other functions transmit FF data based on this format, Acknowledgement data feedback presents status about each function. Acknowledgement
[e][ ][Set ID][ ][OK][Data][x]
02. Input Select (Command2:b) (Main Picture Input) G To adjust volume. 06. Volume Control (Command2:f) G To select input source for the Monitor. Transmission
[k][b][ ][Set ID][ ][Data][Cr]
Data 0: Antenna 1: Cable 2: Video 3: Front Video 4: Component 1 Acknowledgement
[b][ ][Set ID][ ][OK][Data][x]
5: Component 2 6: RGB-DTV 7: RGB-PC 8: HDMI/DVI 03. Aspect Ratio (Command2:c) (Main picture format) G To adjust the screen format. You can also adjust the screen format using the RATIO button on remote control or in the Option menu. Transmission
[k][c][ ][Set ID][ ][Data][Cr]
Data 0: Set by program 1: 4:3 2: 16:9 3: Horizon 4: Zoom 1 Acknowledgement
[c][ ][Set ID][ ][OK][Data][x]
5: Zoom 2 6: Cinema Zoom (1) 15: Cinema Zoom (16) 04. Screen Mute (Command2:d) G To select screen mute on/off. Transmission
[k][d][ ][Set ID][ ][Data][Cr]
Data 0 : Screen mute off (Picture on) 1 : Screen mute on (Picture off) Acknowledgement
[d][ ][Set ID][ ][OK][Data][x]
82 Plasma TV You can also adjust volume with the volume buttons on remote control. Transmission
[k][f][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64 Refer to Real data mapping as shown below. Acknowledgement
[f][ ][Set ID][ ][OK][Data][x]
07. Contrast (Command2:g) G To adjust screen contrast. You can also adjust contrast in the Video menu. Transmission
[k][g][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64 Refer to Real data mapping as shown below. Acknowledgement
[g][ ][Set ID][ ][OK][Data][x]
08. Brightness (Command2:h) G To adjust screen brightness. You can also adjust brightness in the Video menu. Transmission
[k][h][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64 Refer to Real data mapping as shown below. Acknowledgement
[h][ ][Set ID][ ][OK][Data][x]
* Real data mapping 0 : Step 0 A : Step 10 (SET ID 10) F : Step 15 (SET ID 15) 10 : Step 16 (SET ID 16) 63 : Step 99 (SET ID 99) 64 : Step 100 09. Color (Command2:i) G To adjust the screen color. You can also adjust color in the Video menu. Transmission
[k][i][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64 Refer to Real data mapping. See page 82. Acknowledgement
[i][ ][Set ID][ ][OK][Data][x]
10. Tint (Command2:j) G To adjust the screen tint. You can also adjust tint in the Video menu. Transmission
[k][j][ ][Set ID][ ][Data][Cr]
Data Red : 0 ~ Green : 64 Refer to Real data mapping. See page 82. Acknowledgement
[ j ][ ][Set ID][ ][OK][Data][x]
11. Sharpness (Command2:k) G To adjust the screen sharpness. You can also adjust sharpness in the Video menu. Transmission
[k][k][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64 Refer to Real data mapping. See page 82. Acknowledgement
[k][ ][Set ID][ ][OK][Data][x]
12. OSD Select (Command2:l) G To select OSD (On Screen Display) on/off. Transmission
[k][l][ ][Set ID][ ][Data][Cr]
Data 0: OSD off 1: OSD on Acknowledgement
[l][ ][Set ID][ ][OK][Data][x]
13. Remote Control Lock Mode (Command2:m) G To lock the remote control and the front panel controls on the set. Transmission
[k][m][ ][Set ID][ ][Data][Cr]
Data 0: Lock off Acknowledgement
[m][ ][Set ID][ ][OK][Data][x]
1: Lock on External Control Device Setup 14. PIP / POP / Twin Picture (Command2:n) G To control the PIP (Picture-in-Picture)/POP/Twin picture. You can also control the PIP/POP/Twin picture using the PIP button on the remote control. Transmission
[k][n][ ][Set ID][ ][Data][Cr]
Data 0: PIP off 1: PIP Acknowledgement
[n][ ][Set ID][ ][OK][Data][x]
2: POP 3: Twin Picture 15. PIP Position (Command2:q) G To select sub picture position for PIP. Transmission
[k][q][ ][Set ID][ ][Data][Cr]
Data 0: Right down on screen 1: Left down on screen 2: Left up on screen 3: Right up on screen Acknowledgement
[q][ ][Set ID][ ][OK][Data][x]
16. Treble (Command2:r) G To adjust treble. You can also adjust treble in the Audio menu. Transmission
[k][r][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64 Refer to Real data mapping. See page 82. Acknowledgement
[r][ ][Set ID][ ][OK][Data][x]
17. Bass (Command2:s) G To adjust bass. You can also adjust bass in the Audio menu. Transmission
[k][s][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64 Refer to Real data mapping. See page 82. Acknowledgement
[s][ ][Set ID][ ][OK][Data][x]
18. Balance (Command2:t) G To adjust balance. You can also adjust balance in the Audio menu. Transmission
[k][t][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64 Refer to Real data mapping. See page 82. Acknowledgement
[t][ ][Set ID][ ][OK][Data][x]
Owners Manual 83 External Control Device Setup 19. Color Temperature (Command2:u) G To adjust color temperature. You can also adjust color temperature in the Video menu. Transmission
[k][u][ ][Set ID][ ][Data][Cr]
Data 0: Cool 1: Medium 2: Warm Acknowledgement
[u][ ][Set ID][ ][OK][Data][x]
20. PIP Input Select (Command2:y) G To select input source for sub picture in PIP/Twin pic-
ture mode. Transmission
[k][y][ ][Set ID][ ][Data][Cr]
Data 0: Antenna 1: Cable 2: Video 3: Front Video Acknowledgement
[y][ ][Set ID][ ][OK][Data][x]
21. ISM Method (Command2:p) G To avoid having a fixed image remain on screen. Transmission
[ j ][p][ ][Set ID][ ][Data][Cr]
Data 0: Normal 1: Orbiter 2: Inversion Acknowledgement
[p][ ][Set ID][ ][OK][Data][x]
22. White Wash (Command2:q) G To control the white wash function on/off. You can also adjust white wash in Option menu. Transmission
[ j ][q][ ][Set ID][ ][Data][Cr]
Data 0: White Wash off 1: White Wash on Acknowledgement
[q][ ][Set ID][ ][OK][Data][x]
23. Orbiter Time Setting (Command2:r) G To adjust orbiter operation time term. Transmission
[ j ][r][ ][Set ID][ ][Data][Cr]
Data Min: 1 ~ Max: FE Acknowledgement
[r][ ][Set ID][ ][OK][Data][x]
84 Plasma TV 24. Orbiter Pixel Setting (Command2:s) G To adjust pixel number in orbiter function. Transmission
[ j ][s][ ][Set ID][ ][Data][Cr]
Data Min: 1 ~ Max: A Acknowledgement
[s][ ][Set ID][ ][OK][Data][x]
25. Tune Command (Command: m a) G To tune channel to following physical/major/minor number Transmission
[m][a][ ][Set ID][ ][Data0][ ][Data1][ ][Data2][ ][Data3][ ][Data4][ ][Data5][Cr]
Data 0: Physical channel number Min: 1~ Max: 0x87 Data 1, Data 2: Major Channel Number (two part)/ Channel Number (One part) (Data 1: High, Data 2: Low) Data 3, Data 4: Minor Channel Number (Data3: High, Data4: Low) Data 5:
7 0 1 Main/Sub Picture 6 Two/One Part Channel Main Sub 0 1 Two One 5 Reserved 4 Reserved 3 2 1 0 Step x x x x x x x x x x x x x x x x x x x x 0 0 0 0 0 0 0 0 1 0 0 0 0 1 1 1 1 0 0 1 1 0 0 1 1 0 1 0 1 0 1 0 1 NTSC Air NTSC Cable ATSC Air ATSC Cable_std ATSC Cable_hrc ATSC Cable_irc ATSC cable Reserved
... 1 1 1 Reserved
*All data are transmitted by Hexadecimal code Example) If you want PIP channel tuned to ATSC air (standard) 30-5, the command sequence is ma 00 1e 00 1e 00 05 82. Acknowledgement
[a][ ][Set ID][ ][OK][Data0][Data1][Data2][Data3][Data4][x]
[a][ ][Set ID][ ][NG][Data0][x]
26. Channel Add/Del (Command: m b) G To add and delete the channels Transmission
[m][b][ ][Set ID][ ][Data][Cr]
Data 0: Channel Delete 1: Channel Add Acknowledgement
[b][ ][Set ID][ ][OK][Data][x]
[b][ ][Set ID][ ][NG][Data][x]
27. Key (Command: m c) G To send IR remote key code Transmission
[m][c][ ][Set ID][ ][Data][ ][Cr]
Data Key code: Refer to page 86. Acknowledgement
[c][ ][Set ID][ ][OK][Data][x]
IR Codes IR Codes IR Codes How to Connect How to Connect G Connect your wired remote control to the Remote Control port on the TV. Remote Control IR Codes Remote Control IR Codes G Output waveform Single pulse, modulated with 37.917KHz signal at 455KHz TC T1 Carrier frequency FCAR = 1/TC = fOSC/12 Duty ratio = T1/TC = 1/3 G Configuration of frame 1st frame Lead code Low custom code High custom code Data code Data code C0 C1 C2 C3 C4 C5 C6 C7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7 Repeat frame G Lead code Repeat code Tf 9 ms 4.5 ms G Repeat code 0.55 ms G Bit description Bit 0 9 ms 0.56 ms 1.12 ms 2.25 ms Bit 1 G Frame interval : Tf The waveform is transmitted as long as a key is depressed. Tf Tf Tf=108ms @455KHz 0.56 ms 2.24 ms Owners Manual 85 IR Codes Code (Hexa) Function Note 0B 08 C4 C5 98 79 0E 10 ~ 19 4C 1A 09 02 03 00 01 1E AA 39 40 41 07 06 44 43 52 4D 5B 60 72 71 61 63 65 7B 0A CB D6 5A D0 BF D4 D5 D7 C6 76 77 AF 70 96 87 B0 BA B1 BD 8F 8E B2 B3 A9 TV/VIDEO MODE POWER POWER ON POWER OFF COMP/RGB/HDMI RATIO TIMER Number Key 0~ 9
- (Dash) FLASHBK MUTE VOL +
VOL -
CH +
CH -
SURF INFO CC D E F G ENTER MENU SOUND VIDEO EXIT PIP PIPCH -
PIPCH +
PIP INPUT SWAP FREEZE ZOOM SAP ADJUST TV VIDEO Front Video COMPONENT 1 COMPONENT 2 RGB-PC RGB-DTV HDMI/DVI Ratio 4:3 Ratio 16:9 Ratio Zoom POP SIGNAL 1394 PLAY PAUSE STOP REC REW FF GOTOPREV GOTONEXT TV GUIDE R/C Button R/C Button R/C Button (Power On/Off) Discrete IR Code (Only Power On) Discrete IR Code (Only Power Off) R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button Discrete IR Code (TV Input Selection) Discrete IR Code (Video Input Selection) Discrete IR Code (Front Video Input Selection) Discrete IR Code (Component1 Input Selection) Discrete IR Code (Component2 Input Selection) Discrete IR Code (RGB-PC Input Selection) Discrete IR Code (RGB-DTV Input Selection) Discrete IR Code (HDMI/DVI Input Selection) Discrete IR Code (Only 4:3 Mode) Discrete IR Code (Only 16:9 Mode) Discrete IR Code (Only Zoom1 Mode) Discrete IR Code (Channel Search) R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button 86 Plasma TV Programming the Remote Programming the Remote G The remote control is a multi-brand or universal remote control. It can be programmed to operate most remote-controllable devices of other manufacturers. Note that the remote control may not control all models of other brands. Programming the Remote Programming a code into a remote mode Programming a code into a remote mode 1. Test your remote control. To find out whether your remote control can operate the component without programming, turn on the component such as a VCR and press the corresponding MODE button (VCR) on the remote control, while pointing at the component. Test the POWER and CH +/- buttons to see if the component responds properly. If not, the remote requires programming to operate the device. 2. Turn on the component to be programmed, then press the corresponding MODE button on the remote control. 3. Press the MENU and MUTE buttons simultaneously, the remote control is ready to be programmed for the code. 4. There are two ways to find the right code for the component. A. If you press the CH +/- buttons repeatedly, the codes will change one at-a-time. Press the POWER button after each code change. If the right code is found, the device will turn off. B. Enter a code number using the number buttons on the remote. Programming code numbers for the corresponding component can be found on the following pages. Again, if the code is correct, the device will turn off. 5. Press the MENU button to store the code. 6. Test the remote control functions to see if the component responds properly. If not, repeat from step 2. Owners Manual 87 Programming Codes Programming Codes Programming Codes VCRs VCRs Brand AIWA AKAI AMPRO ANAM AUDIO DYNAMICS BROKSONIC CANON CAPEHART CRAIG CURTIS MATHES DAEWOO Codes 034 016 043 046 124 125 146 072 031 033 103 012 023 039 043 035 037 129 028 031 033 108 003 040 135 031 033 041 005 007 010 064 065 108 110 111 112 116 117 119 108 012 023 039 043 034 053 059 006 017 025 027 029 031 034 035 036 037 046 101 129 131 138 153 003 008 009 010 034 031 033 063 072 107 109 144 147 GO VIDEO 132 136 HARMAN KARDON 012 045 HITACHI DAYTRON DBX DYNATECH ELECTROHOME EMERSON FISHER FUNAI GE 004 018 026 034 043 063 137 150 031 033 031 033 012 013 015 033 040 066 101 043 012 031 033 043 048 050 055 060 130 150 152 Brand TATUNG TEAC TECHNICS TEKNIKA THOMAS TMK TOSHIBA TOTEVISION UNITECH VECTOR RESEARCH VICTOR VIDEO CONCEPTS VIDEOSONIC WARDS YAMAHA ZENITH Codes 039 043 034 039 043 031 033 070 019 031 033 034 101 034 006 008 013 042 047 059 082 112 131 040 101 040 012 048 012 034 046 040 003 013 017 024 031 033 034 040 053 054 131 012 034 039 043 034 048 056 058 072 080 101 Brand KENWOOD LG (GOLDSTAR) LLOYD LXI MAGIN MAGNAVOX MARANTZ MARTA MATSUI MEI MEMOREX MGA MINOLTA MITSUBISHI MTC MULTITECH NEC NORDMENDE OPTONICA PANASONIC PENTAX PHILCO PHILIPS PILOT PIONEER Codes 014 034 039 043 047 048 001 012 013 020 101 106 114 123 034 003 009 013 014 017 034 101 106 040 031 033 034 041 067 068 012 031 033 067 069 101 027 030 031 033 003 010 014 031 033 034 053 072 101 102 134 139 045 046 059 013 020 013 020 045 046 049 051 059 061 151 034 040 024 034 012 023 039 043 048 043 053 054 066 070 074 083 133 140 145 013 020 031 033 063 031 034 067 031 033 034 054 067 071 101 101 013 021 048 Brand PORTLAND PULSAR QUARTZ QUASAR RCA REALISTIC RICO RUNCO SALORA SAMSUNG SANSUI SANYO SCOTT SEARS 010 SHARP SHINTOM SONY SOUNDESIGN STS SYLVANIA SYMPHONIC TANDY Codes 108 072 011 014 033 066 075 145 013 020 033 034 040 041 062 063 107 109 140 144 145 147 003 008 010 014 031 033 034 040 053 054 101 058 148 014 032 040 102 104 105 107 109 112 113 115 120 122 125 022 043 048 135 003 007 010 014 102 134 017 037 112 129 131 003 00 013 014 017 020 031 042 073 081 101 031 054 149 024 003 009 031 052 056 057 058 076 077 078 149 034 013 031 033 034 059 067 034 010 034 009 Codes 003 004 039 042 046 052 053 112 014 005 007 014 024 026 092 007 007 065 090 080 081 019 030 023 020 030 040 057 062 066 032 072 008 022 025 054 052 074 Brand GOLDEN CHANNEL HAMLIN HITACHI HOSPITALITY JERROLD LG (GOLDSTAR) M-NET MACOM MAGNAVOX MEMOREX MOVIE TIME NSC OAK PANASONIC PARAGON PHILIPS Codes 030 049 050 055 052 055 070 077 002 003 004 008 009 010 052 069 074 001 106 101 005 037 033 010 012 064 079 100 028 032 015 028 038 071 073 016 031 037 053 044 047 100 006 012 013 020 Brand PIONEER Codes 065 085 090 034 051 052 063 076 POST NEWS WEEK 016 059 PRUCER 011 048 071 072 PTS 073 074 100 047 049 050 057 025 091 102 107 030 068 003 011 041 042 043 045 046 022 030 052 PULSAR RCA REGAL REGENCY REMBRANT RK SAMSUNG SCIENTIFIC ATLANTA SHERITECH SIGNAL SIGNATURE Brand SL MARX SPRUCER STARCOM STARGATE SYLVANIA TADIRAN TAEKWANG TAIHAN TANDY TEXSCAN TOCOM TOSHIBA UNIKA UNITED CABLE UNIVERSAL VIEWSTAR ZENITH Codes 030 047 078 002 004 008 009 008 030 067 030 110 105 017 029 067 039 040 056 100 007 014 024 004 053 005 007 014 024 026 027 032 035 012 015 018 086 087 088 089 100 114 060 093 INSTANTREPLAY JCL JCPENNY JENSEN JVC CACATVTV Brand ABC AJIN ANTRONIK ARCHER CABLE STAR CENTURION CENTURY CITIZEN COLOUR VOICE COMBANO COMTRONICS DIAMOND EAGLE EASTERN ELECTRICORD GE GEMINI GI 88 Plasma TV Programming Codes Codes Brand Codes Brand Codes HDSTB HDSTB Brand Codes ALPHASTAR DSR AMPLICA BIRDVIEW BSR CAPETRONICS CHANNEL MASTER 013 014 015 018 123 050 051 126 129 053 053 CHAPARRAL CITOH CURTIS MATHES DRAKE DX ANTENNA ECHOSTAR ELECTRO HOME 036 055 008 009 012 077 054 050 145 005 006 007 010 011 052 112 116 141 024 046 056 076 038 040 057 058 093 094 095 096 097 098 099 100 122 089 Brand EUROPLUS FUJITSU 114 017 021 022 027 133 134 GENERAL INSTRUMENT 003 004 016 029 HITACHI HOUSTON TRACKER HUGHES HYTEK JANIEL JERROLD KATHREIN LEGEND LG LUTRON LUXOR MACOM 031 059 101 139 140 033 037 039 051 057 104 068 053 060 147 061 108 057 001 132 062 144 010 059 063 064 065 057 028 124 125 069 070 MEMOREX NEXTWAVE NORSAT PACE SKY SATELLITE 143 060 142 PANASONIC PANSAT 121 PERSONAL CABLE 117 071 PHILIPS 105 PICO 019 102 PRESIDENT 030 110 111 PRIMESTAR 072 PROSAT 066 106 RCA REALISTIC 043 074 SAMSUNG 123 SATELLITE SERVICE CO 028 035 047 057 SCIENTIFIC ATLANTA SONY 085 032 138 103 STARCAST SUPER GUIDE TEECOM TOSHIBA UNIDEN UNIDEN VIEWSTAR WINEGARD ZENITH 041 020 124 125 023 026 075 087 088 090 107 130 137 002 127 016 025 042 043 044 045 048 049 078 079 080 086 101 135 136 115 128 146 081 082 083 084 091 120 Audio Audio Brand AIWA AKAI ANAM BURMECTER CARVER CLARION DAEWOO DENON FANTASIA FINEARTS FISHER LG(GOLDSTAR) HAITAI HARMAN/KARDON 068 INKEL Codes 014 028 070 096 125 129 139 229 230 163 003 014 017 023 059 106 189 216 217 235 236 252 086 199 027 053 060 084 102 148 198 221 015 075 130 143 071 022 089 099 001 021 024 029 087 107 108 110 190 191 192 210 211 212 239 034 035 188 222 037 058 062 069 078 079 095 121 122 149 150 151 152 153 154 155 157 158 159 160 189 207 222 224 225 226 227 243 247 Brand JVC KEC KENWOOD KOHEL NAD LOTTE LXI MAGNAVOX MARANTZ MCINTOSH MCS MEMOREX NAD ONKYO OPTIMUS PANASONIC PENNEY Codes 004 013 141 185 186 187 038 050 067 089 170 171 197 206 215 222 030 045 046 014 016 036 098 100 172 173 174 175 176 177 178 179 180 181 183 201 202 208 213 214 219 223 232 238 240 103 111 002 018 020 025 034 041 081 090 097 112 049 104 107 046 013 040 041 047 048 056 057 132 133 140 158 007 033 064 113 142 220 241 251 104 Brand PHILIPS PIONEER QUASAR RCA RCX REALISTIC SAMSUNG SANSUI SANYO SCOTT SHARP SHERWOOD SONY TAEKWANG TEAC TECHNICS Codes Brand Codes TOSHIBA THE VICTOR WARDS YAMAHA 147 218 137 061 088 131 089 054 055 066 092 199 026 112 143 253 039 042 043 063 065 091 093 094 115 123 127 250 113 080 092 103 106 124 145 146 182 193 194 195 203 204 244 245 246 011 135 138 144 019 083 234 106 186 031 032 051 052 072 082 117 119 156 184 199 200 206 209 005 006 158 044 045 109 114 118 126 248 249 012 020 073 074 076 077 105 161 162 163 164 165 166 167 168 169 205 231 233 242 254 010 085 106 136 185 187 237 101 113 128 134 DVDDVD Brand Codes 022 020 014 005 006 APEX DIGITAL DENON GE HARMAN KARDON 027 012 JVC LG 001 010 016 025 Brand MAGNAVOX MARANTZ MITSUBISHI NAD ONKYO PANASONIC Codes 013 024 002 023 008 017 003 009 Brand PHILIPS PIONEER PROCEED PROSCAN RCA SAMSUNG Codes 013 004 026 021 005 006 005 006 011 015 Brand SONY THOMPSON TOSHIBA YAMAHA ZENITH Codes 007 005 006 019 008 009 018 010 016 025 Owners Manual 89 Troubleshooting Checklist TTroubleshooting Checklist roubleshooting Checklist Check whether the TV is turned on. Is the power cord inserted into wall power outlet?
No picture &
No sound Test the wall power outlet, plug another products power cord into the outlet where the TVs power cord was plugged in. Picture OK &
No sound Press the VOLUME (G) button. Sound muted? Press MUTE button. Check to see if there is any object between the TV and the remote control causing obstruction. The remote control doesnt work Are batteries installed with correct polarity (+ to +, - to -)?
(Refer to p.10) Correct remote operating mode set: TV, VCR etc.?
Install new batteries. (Refer to p.10) Picture appears slowly after switching on This is normal, the image is muted during the TV startup process. Please contact your service center, if the picture has not appeared after five minutes. Select Color in the Video menu and press the VOLUME (G) button.
(Refer to p.61) No or poor color or poor picture Keep a sufficient distance between the TV and the VCR. Activate any function to restore the brightness of the picture.
(If still picture is on the screen for more than 5 minutes, the screen gets dark.) Horizontal/vertical bars or picture shaking Check for local interference such as an electrical appliance or power tool. No output from one of the speakers Adjust Balance in the AUDIO menu. (Refer to p.63) Unusual sound from inside the TV A change in ambient humidity or temperature may result in an unusual noise when the plasma display is turned on or off and does not indicate a fault with the TV. 90 Plasma TV Maintenance Maintenance Maintenance
- Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have your new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen Cleaning the Screen 1. Heres a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until its almost dry, and then use it to wipe the screen. 2. Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV. Cleaning the Cabinet Cleaning the Cabinet To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth. Please be sure not to use a wet cloth. Extended Absence Absence Extended If you expect to leave your TV dormant for a long time (such as a vacation), its a good idea to unplug the power cord to protect against possible damage from lightning or power surges. Owners Manual 91 Specification Product Specifications Product Specifications MODELS DU-50PY10 DU-60PY10 67.24 / 1708 36.6 / 931 12.6 / 320.7 189.2 / 85.8 55.2 / 1402 31.4 / 798.5 11.9 / 302.5 122 / 55.3 Width (inches / mm) Height (inches / mm) Depth (inches / mm) Weight (pounds / kg) Resolution Power requirement Television System Program Coverage 1366 x 768 (Dot) AC100-240V ~ 60Hz NTSC-M, ATSC VHF 2 ~ 13, UHF 14 ~ 69, CATV 1 ~ 135, CADTV 1 ~ 135. DTV 2 ~ 69 External Antenna Impedance 75 Color 16,770,000 (256 steps of each R, G and B) Operating Temperature Range Operating Humidity Range Maximum Elevation 32 ~ 104F (0 ~ 40C) Less than 80%
6561 feet (2000m) The specifications shown above may be changed without prior notice for quality improvement. 92 Plasma TV Notes Notes Owners Manual 93 Notes Notes 94 Plasma TV LG ELECTRONICS, INC. PLASMA TV U.S. LIMITED WARRANTY Your LG Plasma TV will be repaired or replaced in accordance with the terms of this warranty, at LGEs option, if it proves to be defective in material or workmanship under normal use, during the warranty period (Warranty Period) listed below, effective from the date (Date of Purchase) of original consumer purchase of the product. This war-
ranty is good only to the original purchaser of the product and effective only when used in the United States, includ-
ing Alaska, Hawaii, and U.S. Territories. WARRANTY PERIOD:
HOW SERVICE IS HANDLED:
LABOR and PARTS: 2 YEARS from the Date of Purchase. In-Home Service: Please retain dealers Your unit will be repaired or replaced with a new, substitute dated bill of sale or delivery ticket as evidence model or factory reconditioned unit, at LGEs option. If of the Date of Purchase for proof of warranty, repaired, parts used in the repair may be new or remanufac-
and submit a copy of the bill of sale to the ser-
tured. vice person at the time warranty service is pro-
Replacement Units and Repair Parts are warranted for the vided. remaining portion of the original units warranty period. EFFECTIVE DATE OF WARRANTY: Your warranty period begins on the date of sale to the original consumer/end user. KEEP THE DEALERS DATED BILL OF SALE OR PROOF OF DELIVERY as evidence of the purchase date. You will be required to submit a legible copy of your bill of sale or proof of delivery when requesting warranty service. Please call 1-201-816-2000 to locate your nearest LGE Authorized Service Center. Visit our website at:
http://www.lgservice.com THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT ANY IMPLIED WARRANTY IS REQUIRED BY LAW, IT IS LIMITED IN DURATION TO THE EXPRESS WARRANTY PERIOD ABOVE. NEITHER THE MANUFACTURER NOR ITS U.S. DISTRIBUTOR SHALL BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY NATURE, INCLUDING WITHOUT LIMITATION, LOST PROFITS, LOST OR CORRUPTED PROGRAMMING OR DATA, OR ANY OTHER DAMAGE WHETHER BASED IN CONTRACT, TORT, OR OTHERWISE. Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above exclusion or limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights that vary from state to state. CONCERNING PIXEL FUNCTIONALITY: Your Plasma TV contains about one million individual pixels. Plasma TV typically contain a small number of pixels that do not function normally. Your display has been inspected and is in compliance with manufacturers specifications, indicating that any pixel defects do not effect the operation or use of your display. IMPORTANT: Please fill out and mail in your Product Registration Card or go to www.lgservice.com to register your product online. This information will allow us to reach you promptly should we discover a safety or reliability prob-
lem that could affect you. THIS LIMITED WARRANTY DOES NOT APPLY TO:
damage caused in shipping or transit gence, improper maintenance or storage, or to acts service required as a result of improper installation, of nature or other causes beyond our control. including incorrect or insufficient AC supply (please
(Causes beyond our control include but are not lim-
consult the owners manual for power supply ited to lightning strike, power surges, power out-
requirements) ages and water damage.) installation or repair of antenna systems, cable con-
image burn-in verters, cable company supplied equipment, or repair or replacement of warranted parts by other other components in a video system than LGE authorized service centers. set-up or adjustment on consumer controls, or units purchased or serviced outside of the coverage damage caused by improper adjustments area. damage caused by other system components product where the original factory serial numbers any panel that has been modified or incorporated have been removed, defaced or changed in any into any other product way. replacement of batteries on the remote control. product sold and labeled as as is, where is or sim-
damage (including cosmetic damage), failure, loss ilar disclaimer. or personal injury due to misuse, abuse, negli-
The cost of repair or replacement under these excluded circumstances shall be borne by the consumer. CUSTOMER INTERACTIVE CENTER NUMBERS:
To obtain customer assistance, product Call 1-201-816-2000 information or Dealer or Service locations 24 hours a day, 365 days per year FOR SERVICE:
Before you call for warranty service, check your operating guide you may avoid a service call. For warranty service information, please contact the LGE Customer Interactive Center telephone number. When calling for service, please have your product model number, serial number and the date of pur-
chase or the date of original installation available. If a replacement unit is required, under some circumstances you may be asked to provide a reserve deposit to the LGE Service Center against a credit card number as surety for advanced shipment. Your credit card will not be charged if you return the defective unit within 10 working days. If a replacement unit is received, please use the carton and packaging from that unit in returning the defective unit to the LGBrand Service Center. Parts and service in accordance with the LGE warranty are LGEs responsibility and will be provided without charge. Other service requirements will be at the owners expense. If you have problems in obtaining satisfactory warranty service, write or call the LGE Customer Interactive Center. Service may be provided by independently owned and operated service organizations. To assure proper credit and avoid unnecessary charges, you must obtain an LGE Return Authorization before returning any product to the LGE Service Center. Contact the Customer Interactive Center for details. TO CONTACT THE LGE CUSTOMER SERVICE CENTER BY MAIL:
LGE Customer Interactive Center P.O. Box 240007 201 James Record Road Huntsville, Alabama 35824 http://www.lgservice.com P/NO : 3828VA0479H (3828VB0002L) b
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2005-05-31 | JBP - Part 15 Class B Computing Device Peripheral | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2005-05-31
|
||||
1 | Applicant's complete, legal business name |
LG Electronics USA
|
||||
1 | FCC Registration Number (FRN) |
0023476120
|
||||
1 | Physical Address |
1000 Sylvan Avenue
|
||||
1 |
Englewood Cliffs, New Jersey 07632
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
h******@AmericanTCB.com
|
||||
1 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
BEJ
|
||||
1 | Equipment Product Code |
DU60PY10
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
K****** H****
|
||||
1 | Title |
Director, Standards & Compliance
|
||||
1 | Telephone Number |
201-4********
|
||||
1 | Fax Number |
201-8********
|
||||
1 |
k******@lge.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
LG Electronics
|
||||
1 | Name |
S******** L******
|
||||
1 | Physical Address |
642 Jinpyoung-dong
|
||||
1 |
Kumi-city Kyoungsangbuk-do, 730-360
|
|||||
1 |
South Korea
|
|||||
1 | Telephone Number |
82-54********
|
||||
1 | Fax Number |
82-54********
|
||||
1 |
s******@leg.com
|
|||||
app s | Non Technical Contact | |||||
1 | Firm Name |
LG Electronics
|
||||
1 | Name |
S******** L****
|
||||
1 | Physical Address |
642 Jinpyoung-dong
|
||||
1 |
Kumi-city Kyoungsangbuk-do, 730-360
|
|||||
1 |
South Korea
|
|||||
1 | Telephone Number |
82-54********
|
||||
1 | Fax Number |
82-54********
|
||||
1 |
s******@leg.com
|
|||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | JBP - Part 15 Class B Computing Device Peripheral | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | PDP Display | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Maximum Resolution: 1024 x 768 | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Estech Co., Ltd.
|
||||
1 | Name |
I****** C****
|
||||
1 | Telephone Number |
82-2-********
|
||||
1 | Fax Number |
82-2-********
|
||||
1 |
i******@estech.co.kr
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15B |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC