all | frequencies |
|
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
USERS MANUAL 1 | Users Manual | 1.83 MiB | ||||
1 |
|
USERS MANUAL 2 | Users Manual | 3.57 MiB | ||||
1 |
|
USERS MANUAL 3 | Users Manual | 1.86 MiB | ||||
1 |
|
USERS MANUAL 4 | Users Manual | 3.44 MiB | ||||
1 |
|
USERS MANUAL 5 | Users Manual | 1.16 MiB | ||||
1 | Block Diagram | |||||||
1 | External Photos | |||||||
1 | ID Label/Location Info | |||||||
1 | Internal Photos | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos |
1 | USERS MANUAL 1 | Users Manual | 1.83 MiB |
P/N:3828BPH009A Rev.00 EG/EM series
E G E M s e r i e s
P N
3 8 2 8 B P H 0 0 9 A R e v
. 0 0
) Copyright 2004 LG Electronics, Inc., DigitalMate Co., Ltd. Thank you for using the LG product. LG has manufactured and tested this product to provide you with a reliable computing environment. Please read this manual carefully before using the computer. This sign calls attention to features and operations that may be dangerous to the user. Follow the instruction closely to reduce the risk of bodily harm or damage to the equipment 1.Warning: Not following the instruction could result in death or serious injury. 2.Caution: Not following the instruction could result in minor or moderate injury and/or damage to the product. This User's guide is for EG/EM model. Instructions may be different depending on models. Check your model before reading User's guide. Keep User's guide at a place where other users always can reach
Microsoft, MS, MS-DOS, and Windows are trademarks of Microsoft Corporation.
IBM, IBM Personal Computer, PS/2 and PC AT are trademarks of International Business Machine Corporation.
is a trademark of LG.
Copyright 2004 LG Electronics, Inc., DigitalMate Co., Ltd.
Information in this manual may include technical inaccuracies or typographical errors. Images in this manual are for illustrative purposes only and may be different from the actual product.
LG reserves the rights to make improvements and/or changes to the product without notice.
Reproducing any or all of the information contained in this publication without written permission is prohibited.
This computer complies with the radio frequency and safety standards of any country or region in which it has been approved for wireless use. Contents Contents..................................................................................................................................... 1 Important Safety Instructions .................................................................................................. 2 1. Installing the system 1-1 Package contents..................................................................................................................................... 9 1-2 Components........................................................................................................................................... 10 1-3 Installing the computer........................................................................................................................... 14 1-4 Attaching external devices(customer purchased devices)..................................................................... 16 2. Using the system 2-1 Turning on the computer........................................................................................................................ 18 2-2 Using Windows XP................................................................................................................................. 21 2-3 Turning off the computer........................................................................................................................ 28 2-4 Restarting the computer......................................................................................................................... 29 2-5 Using Mouse .......................................................................................................................................... 30 2-6 Cleaning the mouse ............................................................................................................................... 32 2-7 Using keyboard ...................................................................................................................................... 33 2-8 Using the optical disk driver ................................................................................................................... 35 2-9 Using the disk drive................................................................................................................................ 39 2-10 Computer virus..................................................................................................................................... 42 3. System Setup 3-1 Starting the system setup....................................................................................................................... 48 3-2 Booting with a bootable floppy disk........................................................................................................ 50 3-3 Setting a password................................................................................................................................. 51 3-4 Changing or removing the password ..................................................................................................... 52 3-5 Recovering the factory default settings.................................................................................................. 54 3-6 Using power saving funtion.................................................................................................................... 55 4. System Recovery ................................................................................................................ 58 5. Reinstalling the drive 5-1 Reinstalling the printer driver ................................................................................................................. 60 5-2 Reinstalling the sound driver.................................................................................................................. 64 5-3 Reinstalling the video driver................................................................................................................... 65 6. System Expansion 6-1 Opening the computer case................................................................................................................... 66 6-2 Main board ............................................................................................................................................. 67 6-3 Connectors............................................................................................................................................. 68 6-4 Replacing the CPU................................................................................................................................. 70 6-5 Increasing the memory.......................................................................................................................... 75 6-6 Adding a hard disk drive......................................................................................................................... 79 6-7 Installing expansion cards...................................................................................................................... 87 Specifications . 89 Contents 1 Important Safety Instructions These safety instructions will ensure many years of safe enjoyment from the prod-
uct. Read this safety instructions carefully before installing the computer. Installing the computer Do not operate your computer near water; for example, in a bathroom. The computer may not function correctly, and there is the risk of electric shock. Operate the computer within a temperature range of 41 to 95 (5~35) and 30 to 80% of relative humidity. Safely dispose of the packing materials, such as desiccant and plastic bags. Children may swallow desiccant or suffocate from plastic bags. Keep your computing environment clean and free of dust. There is a risk of dysfunction to the computer. Keep away from the moisture condensation. It may damage on the computer. If this happens, turn off the computer and make it dry before power is on. Do not place any object within 15cm of the computer. The computer may overheat and result in fire or injuries. Keep your computer away from electromagnetic fields. Exposure to the electromagnetic field may result in loss of data in the hard disk drive and/or damage to the monitor. 2 Important Safety Instruntions Connecting to the power Do not use loose or damaged power plugs. There is a risk of electric shock or fire. Use a correct voltage outlet. There is a risk of fire or electric shock. Use properly grounded outlet. Connecting the computer to an outlet without proper grounding may result in electric shock and damages to your computer. Use your computer at the proper voltage/current level indicated. There is a risk of fire or electric shock. Do not touch or grab the power plug with wet hands. There is a risk of fire or electric shock. If you hear a noise from the power cord or outlet, unplug the power cord imme-
diately, and contact the customer service for help. There is a risk of fire or electric shock. Hold the plug body when removing the power cord from an outlet. There is a risk of fire and damages to the computer. Make sure the power plug fits snugly into the electrical outlet. Loose fit may result in fire. Keep near the power cable and power cord clean. There is a risk of fire. If an object or liquid enters the computer or an adaptor, remove power cord, battery, and any other cables from the computer, and contact the customer service for help. There is a risk of an electric shock, fire, or damage to the computer. Important Safety Instruntions 3 Use properly grounded outlet. Connecting the computer to an outlet without proper grounding may result in electric shock and damages to your computer. Use your computer at the proper voltage/current level indicated outlet. There is a risk of fire or electric shock. Do not bend or place a heavy object on top of the power cord. Keep the chil-
dren and pets from damaging the power cord. Damaged power cord may result in electric shock or fire. Using the computer For cleaning your computer, use mild detergent or computer cleaning products. Be sure to dry completely before using the computer. Using the computer without completely drying it may result in electric shock or fire. During a lightning storm, disconnect the power cord, telephone line, and LAN cable from the computer. There is a risk of electric shock or fire. Do not place water, chemicals, or liquid of any kind on the computer. Liquid of any kind entering inside the computer may result in an electric shock, fire, or dam-
age to the computer. Do not connect the modem directly to a multi-line telephone. There is a risk of fire or damage to the computer. If you drop your computer, remove the power cord and battery pack, and then contact the customer service for check. There is a risk of electric shock or fire. Do not expose your computer to the direct sunlight. The computer may overheat and result in fire or injuries. 4 Important Safety Instruntions Do not place a burning candle or cigarette on the computer. There is a risk of fire or damage to the computer. If you see or smell smoke from the computer or adaptor, turn off the computer, remove the power cord, and then contact the customer service for help. There is a risk of fire. Upon completion of any service or repairs, ask service technician to perform safety checks. Ignoring safety checks may result in electric shock or fire. Keep the computer away from heat. The computer may deform and there is the risk of fire. Turn on the external devices first and then in order of. There is a risk of damage to the computer. Turn off the external devices first and then in order of. There is a risk of damage to the computer. Use only the proper devices to the connector. There is a risk of damage to the computer. Do not use any damaged CD or floppy disk. There is a risk of damage to the computer or injuries. Use the Wireless LAN at least 5meters away from a microwave oven or plasma lamp. When using the Wireless LAN near a plasma lamp, use the channel 11, 12, or 13. The connection can be unavailable or slow. Do not press eject button while the CD-ROM or floppy drive is in use. Data can be lost and there is a risk of injuries. Place the memory card in a correct position when inserting it. There is a risk of damage to the memory. Do not drop the parts of computer. There is a risk of injuries or damage to the computer. Important Safety Instruntions 5 Carrying and storing the computer Before moving the computer, turn the power off and remove all the cables. You may trip over the loose cables and fall. Upgrading the computer Keep screws and other small parts away from children. Children may choke on a screw or other small part. If a child swallows a small part, receive a medical care. Do not disassemble the power supply devices. There is a risk of an electrical shock. Before disassembling the computer for upgraing purposes, turn off the power and remove the power cord, phone line and battery pack. There is the risk of electric shock or fire. If you need to open the computer cover, contact the Technical support for help. Do not attempt to disassemble or modify the computer without consulting Technical support. you need to open the computer cover, contact the Technical support for help. There is a risk of an electrical shock. Always refer to the User's Guide. There is a risk of an injuries. Replace only with the parts approved by LG. There is a risk of fire or damage to the computer. Consult with the customer service before connecting and using the computer with any non-LG product. There is a risk of damage to the computer. 6 Important Safety Instruntions Preventing data loss (handling hard disk drives) Be cautious when handling the hard disk drive.
The hard disk drive is very delicate to any physical impact. Always make backups for your data
LG is not responsible for the data lose caused by users. The data on the hard disk or the drive itself may be damaged in the following situations.
Exposure to a physical shock during the disassembling or installing process
The computer is reset (rebooted), for example by power outage, while the hard disk drive is operating.
Exposure to computer virus
The computer is turned off during operation To prevent data loss due to hard disk drive damages, always backup your data. LG is not responsible for the loss of data. Important Safety Instruntions 7 Help and Support 1. Click [Help and Support] to learn how to solve problems you may encounter while using the computer. Click [Start] - [Help and Support]. You can connect to the Internet and ask for assistance online. You can setup and configure your computer to personalize your computing environment. 2. The following window appears. You can search for useful Help and Support information. Click to learn the features and troubleshooting information. 8 Helf and support 1. Installing the system 1-1. Package contents The following items are included in this package. Match the items below with the items in your package. Some items may look different from the pictures. When cleaning your computer, use cleaning products manufactured specifically for computing equipment. Using abrasive chemicals, such as paint thinner, ben-
zene, or alcohol, may damage your computer. Computer Keyboard Mouse Power code User's guide Trouble-shooting guide
Modem cable LG Giljabi CD
( Software Installations CD) Recovery CD Installing the system 9 1-2. Components Front view
10 Installing the system
Power button Turns the power on/off the computer.
Power/ Hard disk drive status indicator Indicates whether the computer is on and the hard disk drive is in use(blinking indicates the hard disk drive is in use). Note
Depending on the hard disk drive, the indicator may not blink and simply goes off during multiple operations.
Floppy disk drive Enables reading from and writing to a 3.5 inch floppy disk.
Floppy disk drive button Floppy disk drive button is used when insert/eject floppy into floppy disk drive.
CD-ROM drive button Is used when insert/eject CD into CD drive.
CD-ROM drive Enables reading a data, video, or audio CD.
(Your computer may have a CD-RW or DVD-ROM drive depending on the model.)
Audio connector Headphone connector : Connects to headphones. Microphone connector : Connects to a microphone.
USB connector Connects to a USB device or HUB. For example, you can connect to a USB mouse, digital camera, or external hard disk drive.
Computer holder Holds the computer safely when the computer stands alone. Note
Your computer supports USB 2.0.
Your computer may have different features and configuration from the computers shown above. Installing the system 11 Rear view
Note
EM model does not support No,,
Your computer may have different features and configuration from the computers shown above.
Power specifications may be different depending on the country or region, check the power specifications before use. 12 Installing the system
Powerconnector Connects to the power cord for supplying power to your computer.
Keyboard connector Connects to a PS/2 keyboard.
Mouse connector Connects to a PS/2 mouse.
Never disassemble the power supply.
There is a risk of fire, electric shock, and/or injuries.
USB connectors Connect to USB devices or HUB. For example, you can connect to a USB mouse, digital camera, or external hard disk drive.
Parallel connector Connects to a parallel device such as printer or scanner.
Serial connector Connects to a serial device.
Video connector Connects to a monitor.
Audio connector Microphone connector : Connects to an external microphone. Line-in : Connects to external audio device. Speaker connector: Connects to an external speaker.
LAN Enables network connection between HUB and UTP (wire connection).
IEEE1394 6pin connector Connects to IEEE1394 pin devices, such as exter-nal hard disk or CD-RW drive.
TV-Out connector Connects to external devices such as Television. Connects to a monitor cable.
Video connector Note
Modem cable is offered for models that support modem card. Installing the system 13 1-3. Installing the computer Installing your computer may be easier than you think. Before the installation, be sure to turn off the computer and other peripheral devices. The mouse and keyboard con-
nectors look identical; therefore, check the icons above the connectors before attach-
ing the mouse and keyboard. Your computer may be installed with different expansion cards from the picture below. Some items may look different from the picture.
Note
For USB mouse users, USB connectors are located both the front and rear of the computer.
Do not place a glass or container with water, chemicals, or liquid of any kind in it on the computer. There is a risk of electric shock and/or damage to the computer. 14 Installing the system
Connecting a keyboard The keyboard cable has a round connector with 6 pins. Align the pins and holes, and attach the keyboard cable to the computer as shown in the picture.
Connecting a mouse The mouse cable has a round connector with 6 pins. The round connector on the mouse cable fits into the PS/2 connector on the rear of the computer. Be sure to align the 6 pins on the cable with the corresponding holes on the connector.
Keyboard stand The keyboard stand is located at the bottom of the keyboard. Lift the stand to use the keyboard more comfortably.
Connecting to power Power supply is 110V/220V (selection) or 220V only. Attach the power cord to the computer and then plug the power cord into a wall socket.
Power supply is 110V/220V (selection) or 220V only.
Check the location of the switching button when 110V/220V
(selection) is used. 220V use 110V use
Operate the product at the proper voltage when selecting 110V or 220V power supply. Incorrect use of power supply may damage on the product or fire. Installing the system 15 1-4. Attaching external devices(customer purchased devices) EG Model
EM Model
Note
Your computer may have different features and configuration from the pictures shown above.
Do not overload an electrical outlet with connections to multiple devices. Overloading an electrical outlet may result in fire or electric shock.
Do not place the computer or other devices on the cables as they may be damaged.
Do not touch the power cord or plug with wet hands. Doing so may result in electric shock. 16 Installing the system Connecting a monitor(customer purchased device) The monitor cable and power cord are included with the monitor. For using the monitor, refer to the user manual that comes with the monitor. When using built-in video When installing video card
Connect the monitor cable to the video card. The monitor cable sends signal from the computer to monitor.
Connect the power cable to the monitor and plug it into an electrical outlet. The power cord supplies power from the electrical outlet to monitor. You must turn on and off the monitor with the power button on the monitor. To supply to supply power to the monitor, check the power specification of the monitor before attaching the power cord to the computer. Connecting a printer(customer purchased device) The printer cable and power cord are included with the printer. For using the printer, refer to the user manual that comes with the printer.
Connect the printer cable to the parallel connector on the computer.
Connect the printer cable to the parallel connector on the printer.
, Connect the power cord to the printer and plug it into an elec-
trical outlet. Connecting a speaker(customer purchased device) Your computer does not have built-in speakers. You must attach an external speaker to out put sound.
Connect a speaker cable to the speaker connector on the real of the computer. Note
Adjust sound volume by using C-Media 3d Audio configuration icon from the taskbar. Installing the system 17 2.Using the system 2-1.Turning on the computer Make sure if there is nothing in Floppy disk and see if the computer is well connected to the power cable and other external device drivers. You should complete registration process. Start registration process following the instruction after turning on the com-
puter. Registration process
Pressing the power switch starts the self-diagnostic procedures; then Windows(R) XP startup screen is displayed .In a moment, a dialogue box, saying "Welcome to Microsoft Windows" appears on the screen. Then Click [Next].
After "Help protect your PC" message appears on the screen, select "Help protect my PC by turning on Automatic Updates now" and then press [Next]. 18 Using the system
Internet connection option screen appears, follow the instruction.
If you turn the power on the computer for the first time, you have to register your copy of Windows XP. The registration process may differ depending on the model, but the difference does not affect the use of your computer.
"Who will use this computer?" message appears on the screen. Type the names of the users and click [Next]. Using the system 19
"Thank you!" message appears on the screen. Click [Finish] to complete the registration process. Windows Certificate Windows Certificate includes the product number which proves your Windows Operating System is original product. Please always keep this certificate with you. The Windows Certificate you have may look different from the picture. 20 Using the system
1 | USERS MANUAL 2 | Users Manual | 3.57 MiB |
2-2.Using Windows XP Windows XP is new, brilliant and easy-to-use. Background and title bar have been rearranged concisely, and it became easier to access the application programs from the start menu. Also, it allows users with more diverse options to choose from when decorating desktop's appearance. Overview Windows XP is an operating system that runs a computer. Learning the basics features in Windows is recommended to utilize a computer effectively.
Minimize
Minimize Maximize
Maximize Close
Close Click [Start] - [Tour Windows XP] to explore the features and tools available in Windows XP. Using the system 21 Windows XP desktop
[Start] button
[Start] menu
Taskbar
Taskbar icons and clock
Recycle Bin Click [Start] button to open the [Start] menu. Click [All Programs] to open the list of programs installed in the computer.
[Start menu] shows everything you need to start work-
ing in the Windows XP environment. Taskbar shows programs that are currently open and running. Taskbar icons show and let you configure ongoing activities such as display properties, LAN settings, etc. Put your unused items and files in the Recycle Bin. Right-click the Recycle Bin and select [Empty Recycle Bin] to permanently delete the items inside the Recycle Bin. 22 Using the system Start menu
Clicking [Start] button enables you to easily access computer programs.
Pinned items
Recently used items
All Programs
Control Panel lets you change the settings in your computer.
My computer shows the drive and network information for
your computer. Changing the look of the Start menu
Right click [Start] button and select [Properties]. Choose from either Start menu or Classic Start menu.
If you want default start menu, click [Start menu] from [Start Menu Properties].
Click [Classic Start menu] if you want to use the menu style from earlier versions of Widow.
Click [OK]. New start menu style appears on the desktop. Using the system 23 Changing the pinned items in the Start menu Fixed items
Right-click the item you want to pin to the Start menu.
Select [Pin To Start Menu].
The item is pinned at the top of the Start menu. Showing the recently used items on the Start menu
Right-click on [Start] button and click [Properties].
In [Start Menu] tab, select [Start menu] and click
[Customize]. In [Advanced] tab, check [List my most recently opened documents] and click [OK].
In Taskbar and Start Menu Properties window, click
[Apply]-[OK]. If you click [Start] button the next time, recently used items appear on the Start Menu. Note
To delete recently opened documents, select [Clear list] from [Advanced] tab. The files are not deleted in the system even if the lists are cleared. Control Panel
[Switch to Category View] is added to the Control panel to gather similar items in group. Classic view shows each item in window. You can choose either Classic or Category view. Category View 24 Using the system Classic View Changing the Themes and Desktop background You can customize the appearance of desktop by using Theme option such as desktop back-
ground, screen saver, icon, window, mouse pointer or sound. For more than one user, each user can use different theme. Using the Windows Classic Theme
Click [Start][Control Panel][Switch to Classic View][Display].
Click [Themes] tab.
Select [Windows Classic] from the [Theme] drop down menu. Using a different theme
Click [Start][Control Panel][Switch to Classic View][Display].
Click [Themes] tab.
Select another theme from the [Theme] drop down menu. Note
To view display properties, click [Start] [Control Panel] [Switch to Classic View]
and double-click Display. After selecting Windows Classic, you can customize Windows elements such as window borders, icons, and menus. Select Appearance tab, and click Advanced. Using the system 25 Changing the desktop background
Click [Start][Control Panel][Switch to Classic View]
[Display]. Click [Desktop] tab. (Or you can right click on the mouse while in desktop background. When a short cut menu pops up, choose [Properties].
Scroll down the [Background] drop down menu and select an image for the background. You can also click [Browse]
button and select an image you have saved. Setting the Screen Saver
Click [Start][Control Panel][Switch to Classic View]
[Display]. Click [Screen Saver] tab.
Select your choice from [Screen savers]. Choose stand by time by using scroll bar. To protect important data from other users, select [On resume, pass word protect], it will ask users a password from the screen save mode. 26 Using the system To personalize your desktop themes.
Click [Control pannel][Switch to classic view][Display]
Select theme from the theme drop down menu.
Theme changes.
After making a selection, click [Apply]
and then click [Save as].
Enter a theme name and press [OK]. Note
To open Display Properties, click [Start]
[Control pannels][Switch to classic view] and then double-click [Display]. If you do not save the theme, the name of the theme does not change. The new theme is saved in My docu ments folder. To open My document folder, click [Start] and select [My docu ments]. Taskbar Taskbar displays programs and files that are currently open. If there are many pro-
grams running on the computer, the Taskbar group together files from the same program to prevent taskbar icons from cluttering up the Taskbar. Desktop cleanup With Desktop Cleanup Wizard, you can delete hot icon paths that are not used on the desktop. Desktop Cleanup Wizard will be automatically executed every 60 days, or you can run this program when necessary. To delete unused icons on the desktop, do the following 1.Open [Control Panel] [Switch to Classic View] [Display]. 2.Click [Customize Desktop] under Background tab. 3.Click [Clean Desktop Now] under Desktop Cleanup tab. 4. Follow instructions of [Desktop Cleanup Wizard]. Using the system 27 2-3.Turning off the computer If the Drive in use indicator is on, do not turn off the computer, as doing so may damage the data being read from or written to the drive.
Quit all running applications; click [Start] and choose [Turn off computer] from the start up menu.
In the Turn off computer window, choose Turn off.
The computer is turned off automatically.
You may not be able to normally turn off the computer in Windows. When this happens, press the Power button for five seconds. However, this is an emergency measure and taking this measure may result in errors in the system. It is recommended to click the [Start] button and select Turn off Computer menu on Windows desktop to shut down the computer. Abnormal turning-off of the computer may damage data stored in the hard disk.
When the program suddenly stops, click [Ctrl] + [Alt] + [Delete] keys and terminate the pro-
gram through Windows Task Manager or restart the system. If the some program files of Windows has been damaged due to abnormal turning-off of the computer, reinstall damaged programs. LG Electronics is not responsible for data loss caused by your mistakes and negli-
gence. 28 Using the system 2-4. Restarting the computer You can restart the computer as the instructions bellow, when the computer does not function correctly or freeze out.
Press [Ctrl] + [Alt] + [Delete] keys to terminate the program or restart the computer.
In case the measure described above does not work, press the Power button for five seconds to turn off the computer. Then, restart the computer after 10 seconds. Note
Keyboard and mouse may look different from the picture. Using the system 29 2-5. Using Mouse This chapter explains how to use mouse pointing device. You may have a different features on your model. EG/EM model supports an optical mouse with USB connec-
tion. What is click?
To press down and release a left button on a mouse pointing device in order to select an item on a display screen or activate a command or function. What is double click?
Pressing the left button twice in rapid succession in order to activate a command or function represented graphically on a display screen. What is Pop-up menu?
When using Windows, clicking the right button on the mouse opens the pop-up menu. (Pop-up menu is to command a copy, send or open/close functions to support an application program.) What is drag?
To move a mouse while pressing down on one of its button. Drag 30 Using the system Wheel Using wheel?
To cause (displayed text or graphics) to move up, down, or across the screen so that a line of text or graphics appears at one edge of the screen for each line that moves off the opposite edge. Using the system 31 2-6.Cleaning the mouse If the mouse pointer does not move well, you need to clean up the ball inside the mouse. (The appearance of mouse may be different depending on models). Clean up the mouse with cotton swap and alcohol as follows.
Open up the cover in the direction of the arrow as shown on the picture and take out the ball.
See if inside of the mouse is filled with dust.
Clean with cotton swab and alcohol.
Close the cover in the direction of the arrow and use the mouse. 32 Using the system 2-7. Using Keyboard Keyboard is used for entering text and commands in the computer.
ESC key Used to command quit or cancel while appli-
cation program is running.
Function keys enable you to perform different opera-
tions depending on the operating system and application program you use.
F1 In many cases, it starts help menu from most application programs.
Typewriter key pad
(refer to the User's guide page34)
Modifier and special function keys Print Screen Press PrtSc key to take the snapshot image on the screen. Scroll Lock to move an entire image on the screen without moving a cursor. Pause/Break to stop movements for a specified time.
Direction keypad /
Numeric keypad direction keys mark the position at which a cursor can be moved. Numeric keys can be used as direction keys when NumLock indicator is on. Home home moves the cursor at the beginning of the sentence. End end moves the cursor at the end of the sentence. Page Up page up moves the cursor to the previ-
ous page. Page Down page downmoves the cursor to the next page.
Multimedia/Internet function keys Home aunches the Internet Explorer on your system. Search Internet Explorer or Windows Explorer must be launched to use this key to access to the search engine in the Iternet Explorer or search files in the Windows Explorer. E-mail launches the Outlook Express on your system. Using the system 33 Typewriter Keyboard The keyboard is used for entering text and command.
Tab key Used to input data in the data input window and to move to the next data input window. EX LG LG User Inputting a name Tab Inputting initials of the name
Caps Lock key Lock the keyboard in the upper case position.
Shift key Hold Shift key down and press another key to enter the upper case letter.
, Clrt key or Alt key Keys (shortcuts) are used in conjunc-
tion with Arlt key or Ctrl key to provide shortcuts for some of the predefined operations. Spilling the water on the keyboard causes disfunction to the computer. 34 Using the system
Backspace key Moves a cursor to backward when deleting letters.
Enter key Used at the end of each command to move on to the next line.
Space key Make a blank or empty area: the spaces between words.
Windows key Opnes up the start menu when using Windows operating system.
This key is used to view shortcuts for the current program (Shortcut menu key works the same as the right-clicking the mouse button)
This key is used in conjunction with
[Fn] key to move on to the next or previ-
ous page. 2-8.Using the optical disk driver Different model types provide different optical disk drives.
(Some models have DVD-ROM drives and others have DVD/CD-RW COMBO/DVD
ROM COMBO drives.) Inserting a CD Turn on the computer, and press the eject button on the CD-ROM drive. Put the CD with its labeled side up, and insert the CD in CD-ROM tray without touching the playing part.
(The trademark must face upward.) Note Eject button Eject button : eject CD out of the computer. Gently push the button only once.
After inserting a CD, press the CD-ROM cover or press the Eject button again.
This model adopted slim design for efficient use of space and the CD-ROM (RW/DVD/COMBO) drive is vertically installed. Therefore, a small-
sized CD titles (80mm) may not be properly inserted. If necessary, lay down the product to insert such small-sized CD titles. Using the system 35 Using Windows Media Player You can use Windows(R) Media Player to play various types of audio and video files.You can play and make a copy of an audio CD, listen to the Internetradio broadcast, play movie clips, and listen to music or watch a video on a web site. If you have a DVD drive, you can play a DVD. If you have a CD-RW drive, you can use Windows Media Player to make your own music CD.
[Press Start][All Programs][Accessories][Entertainment][Windows Media Player].
When Windows Media Player opens, press Open under File menu, and then select an audio or video file you want to play. Adjusting volume
Click [Volume] icon from the taskbar.
Drag the mouse to move the slide bar to adjust the volume. 36 Using the system Replacing CD-ROM(RW/DVD/COMBO)
Remove the computer cover. Refer to the Opening the computer.
After disjointing 4 screws, remove the cover as the direction on the picture
Remove 4 screws from the hard disk case.
Pull out the CD-ROM drive after removing the cable from the CD-ROM drive. Using the system 37
After installing the CD-ROM drive push it as the direction of the arrow.
Fasten 4 screws to install the CD-ROM drive in the hard disk case as shown on the picture.
Connect the cable and fasten 4 screws at hard disk.Refer to the Closing the computer cover page68. Note
Adjust the Jumper of rear CD-
ROM to make it (SL:Slave) when adding a new CD-ROM. Refer to the CD-ROM manual for more details. 38 Using the system 2-9.Using the disk drive Using floppy disk drive Floopy disk drive is built in your computer. After inserting floopy into the drive, you can read and write data. The capacity of floopy disk is less than your hard disk however, it is easily carry on your hands and smaller than other disk drives. Using floppy disk Always make back up files for your important information.
Keep your floppy disk in a safe space.
Use the label part when you pick up or hold the floppy disk.
Attach labels after writting letters on it.
Handle floppy disk with care.
Use only one label to each floppy disk.
Keep floppy disk away from magnetic product such as TV.
Keep floppy disk from direct sunlight.
when inserting the floppy disk, label should face upward. Prohibiting data access into the floppy With this floppy disk. you can read, write, delete and change data. But by positioning the tap as shown on the right, you can only read data from the floppy disk. Closed : read/write Open : Read only Note
When the floppy disk status indicator is on, do not attempt to take floppy out of computer. Using the system 39 Using hard disk drive Hard disk drive is a storage device in the computer. Refer to the System setup for set-
ting up the computer system. Damages to the computer data. Always make backup files for your important information. LG is not responsible for data loss caused by users. Installing the computer
Turn off the computer when disassembling the computer and see if the computer and the power cable is correctly connected. Incorrect connection to the power cause the damages to the computer.
Do not use any other screws that are not approved.
Set the computer on a flat surface. Computing environment
Do not give excessive pressure on the computer.
Do not place your computer to temperatures above (140 degrees F) (60 degrees C).
Keep your computer away from electronic equipments that create strong radio waves.
During a lightning storm, remove the power cord, telephone line, and LAN cable from the computer. The data on your hard disk itself may be damaged in the following situations
Do not give excessive pressure on the computer.
When the computer is reset (rebooted), for example by power outage, while the hard disk drive is operating.
A computer virus is detected on your computer.
Incorrect input of (BIOS) setup.
When the necessary files are deleted or damaged.
Turning off the computer when the system is operating. 40 Using the system Disk Defragment Gathers all the bad sectors on the disk. Quit all application programs before run-
ning Disk Defragmenter.
From the [Start] button,[Accessories][System tools][Disk Defragmenter].
If the following dialogue box appears, select a drive you want to claenup and then click [Defragmenter].
Following images appears.
Click [Press] after the Disk claenup process is complete. Using the system 41 2-10.Computer virus A small program that alters or destroys information stored in the computer.Norton AntiVirus is offered to detect computer virus. For one year after installing windows OS Norton AntiVirus is available to use. Installing Norton Antivirus
Click the Norton Antivirus icon on the desktop.
Following windows appears. Click [Next].
Click [Next] to install Norton Antivirus. 42 Using the system
Following window appears.
"Norton Antivirus installation is complete" message appears. Click [Finish]. Using the system 43
1 | USERS MANUAL 3 | Users Manual | 1.86 MiB |
Norton Antivirus update You should have an internet access to process Norton Antivirus update.
Click [Start] and [All programs][Norton Antivirus][Live Update]-[Norton AntiVirus].
Click [Next].
Following window appears. 44 Using the system
Click [Next].
Downloading update-items online.
Click [Finish] . Norton Antivirus Update is complete. Using the system 45 Running Norton Antivirus
Click [Start][All programs][Norton Antivirus][Norton AntiVirus2004].
Click [Scan for virus] and select an item to scan.
Norton AntiVirus is scanning virus. Note
If any virus is detected, click [Fix] to repair.
Click [Finish]. Virus scanning is complete. 46 Using the system
memo 47 3.System setup The system setup saves your computers hardware configurations in CMOS RAM. The system setup provides you with information, such as the size and type of your hard disk, size of the installed memory, date, and time. 3-1. Starting the system setup You may want to use the CMOS Setup Utility in the following situations:
Booting the system floppy disk. (page 50).
Setting a password(page 51).
Changing or removing the password(page 52).
Recovering the factory default settings(page 54). Do not change the system setup arbitrarily. Incorrect system setup may result in errors while using the computer. The menu and default factory settings of the CMOS Setup Utility may look different from this manual. They may have been changed to improve the performance of the system. Keys used in the CMOS Setup Utility
Select the current item. Close the current window or move to the previous window. Move up, down, left, and right. Increase or decrease the value Increase or decrease the value. Increase or decrease the value. Save or exit the system setup. 48 System setup Note
keys (arrow keys) move the cursor up, down, to the left and right. If Num Lock button is off, the arrow keys in the numeric keypad can be used just like the cursor control keys.
<Cursor keypad>
<Numeric keypad>
Turn on the computer and monitor.
When LG logo appears on the screen, press [Delete].
The CMOS Setup Utility window appears. Phoenix-Award BIOS CMOS Setup Utility
Standard CMOS Features PC Health Status
Advanced BIOS Features Frequency/Voltage Control
Advanced Chipset Features
Integrated Peripherals
Power Management Setup
PnP/PCI Configurations Load Optimized Defaults Set Password Save & Exit Setup Exit Without Saving Esc : Quit F10 : Save & Exit Setup
: Select ltem Time, Date, Hard Disk Type..... System setup 49 3-2. Booting with a bootable floppy disk Follow the instruction below to set the floppy disk as start up disk.
Open the CMOS Setup Utility. Use the arrow keys to select Advanced BIOS Features and press [Enter].
Use , and keys to select 1st Boot Device. Use page up/down keys to select Floppy. Phoenix-Award BIOS CMOS Set up Utility Advanced BIOS Feature
Hard Disk Boot Priority BIOS Virus Warning Hyper-Threding Technology Quick Boot 1st Boot Device 1st Boot Device 2nd Boot Device 3nd Boot Device Boot Other Device Swap Floppy Floppy Seek Boot Up Num-Lock LED Gate A20 Option Security Option
APIC Function MPS Table Version Hard Disk S.M.A.R.T Full Screen LOGO Show Summary Screen Show Item Help Memu Level Select Your Boot Device Priority Enabled Disabled Enabled Disabled
CDROM Floppy HDD-0 Enabled Disabled Disabled On Fast System Enabled 1.4 Disabled Disabled Enabled
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5:Previous Values F7:Optimized Defaults
To save changes in System Setup, press the [F10] key.
When the following message appears, press [Enter]. The computer restarts. SAVE to CMOS and EXIT(Y/N)? Y 50 System setup 3-3. Setting a password If you want to protect the system setup from unauthorized users, follow the instruction below to set a password. You can set a password in the CMOS Setup Utility program. If you forget the password, you cannot gain access to your system. Be sure to write down the password in a safe place only you can refer to in case you forget the password.
Start the CMOS Setup Utility. Use the arrow keys to select Advanced BIOS Features, and then press [Enter].
Use the arrow keys to select Security Option. Use the Page Up and Page Down keys to select Setup or System, and then press Esc. Phoenix-Award BIOS CMOS Set up Utility Advanced BIOS Feature
Hard Disk Boot Priority BIOS Virus Warning Hyper-Threding Technology Quick Boot 1st Boot Device 2nd Boot Device 3nd Boot Device Boot Other Device Swap Floppy Floppy Seek Boot Up Num-Lock LED Gate A20 Option Security Option Security Option
APIC Function MPS Table Version Hard Disk S.M.A.R.T Full Screen LOGO Show Summary Screen Show Item Help Memu Level Select Your Boot Device Priority Enabled Disabled Enabled Disabled CDROM Floppy HDD-0 Enabled Disabled Disabled On Fast System Enabled 1.4 Disabled Disabled Enabled
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5:Previous Values F7:Optimized Defaults Note
If you select Setup in the Security Option, the computer asks for a password next time you try to enter the CMOS Setup Utility. If you select System, the computer asks for a password next time you start the computer and also when you try to enter the CMOS Setup Utility. Setting the System password prevents unauthorized users from using the computer or changing the system setup.
Use the arrow keys to select Set Password, and then press [Enter]. System setup 51
If the following message appears, enter the new password and then press
[Enter]. A password must consist of characters A~Z and numbers 0~9, and has the maximum length of 8. Enter Password :
If the following message appears, enter the password again, and then press [Enter]. Confirm Password :
Press [F10] to save the new settings.
If the following message appears, press [Enter]. The computer restarts. SAVE to CMOS and EXIT(Y/N)? Y 3-4. Changing or removing the password You must know the password to change or remove it.
Start the CMOS Setup Utility, enter your password, and then press [Enter]. Phoenix-Award BIOS CMOS Setup Utility
Standard CMOS Features
Advanced BIOS Features
Advanced Chipset Features
Integrated Peripherals
Power Management Setup
PnP/PCI Configurations Enter Password:
PC Health Status
Frequency/Voltage Control Load Optimized Defaults Set Password Save & Exit Setup Exit Without Saving Esc : Quit F10 : Save & Exit Setup
: Select ltem Change/Set/Disable/Password 52 System setup
To change the password, follow the instructions on Setting a password.
To remove the password, follow the instructions below.
Use arrow keys to select Set Password, and then press [Enter]. Phoenix-Award BIOS CMOS Setup Utility
Standard CMOS Features PC Health Status
Advanced BIOS Features Frequency/Voltage Control
Advanced Chipset Features
Integrated Peripherals
Power Management Setup
PnP/PCI Configurations Load Optimized Defaults Set Password Save & Exit Setup Exit Without Saving Set Password Esc : Quit F10 : Save & Exit Setup
: Select ltem Change/Set/Disable/Password
If the following message appears, press [Enter]. Enter Password :
If the following message appears, press [Enter]. PASSWORD DISABLD!!!
Press any key to continue...
Press [F10] to save the new setting.
If the following message appears, press [Y] key and [Enter]. The computer restarts. SAVE to CMOS and EXIT(Y/N)? Y System setup 53 3-5. Recovering the factory default settings You can follow the instructions below to recover the factory default settings.
Start the CMOS Setup Utility. Use the arrow keys to select Load Optimized Defaults and press [Enter].
If the following message appears, press [Y] key and then [Enter]. The factory default settings have been recovered. Load Optimized Defaults (Y/N) ? Y
To save changes in System Setup, press the [F10] key.
If the following message appears, press [Enter]. The computer restarts. SAVE to CMOS and EXIT(Y/N)? Y 54 System setup 3-6. Using Power saving function You can use power saving function in Windows OS no matter how you set the BIOS setup.
Click [Start][Control panel][Switch to classic view].
Double click Power option icon from the control panel.
Set the Power option properties and click [OK]. There are some devices which do not support the power saving function properly. If you have installed such devices, you should disable power saving function.
Click [Advanced] for setup if necessary and then click [OK]. Note
Hibernation mode: It saves data and turns off the power and then restores data when the system starts again. System setup 55 Your computer support ACPI power saving and you can change Sleep State in the BIOS system setup. Set to S3(STR) to manage power more effectively in standby mode. Use the power button to exit standby mode. If you want to use a keyboard stroke or mouse movement to exit standby mode, change S3(STR) to S1(POS). Note: S1(Power On Suspend), S3(Save to Ram)
Start the CMOS Setup Utility. Use the arrow keys to select Power Management Setup and then press [Enter].
Use the arrow keys to select Sleep State, and PageUp and PageDown keys to set S1(POS). Item Help Memu Level Phoenix-Award BIOS CMOS Set up Utility
Run VGA BIOS If S3 Resume Sleep State Sleep State Power Management Video Off Method Video Off In Suspend Suspend Type MODEM Use IRQ Suspend Mode HDD Power Down Power Button Function CPU THRM-Throtting Wake Up On PME
USB KB Wake-Up From S3 Resume by Alarm
Date(of Month) Alarm
Time(hh:mm:ss) Alarm Power Management Setup
[S1/(POS)]
S1 (POS)
[Auto]
[User Define]
[DPMS]
[YES]
[Stop Grant]
[3]
[Disabled]
[Disabled]
[Suspend]
[Disabled]
Disabled
[Disabled]
0 0:0:0
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5:Previous Values F7:Optimized Defaults
To save changes in System Setup, press the [F10] key.
If the following message appears, press [Enter].The computer restarts. SAVE to CMOS and EXIT(Y/N)? Y 56 System setup
memo 57 4. System Recovery The system setup saves your computers hardware configurations in CMOS RAM. The system setup provides you with information, such as the size and type of your hard disk, size of the installed memory, date, and time. Restoring the system by using Recovery CD You can restore your computer system by using Recovery CD, shipped with your Computer. You can select two options (Full Recovery without Format / Full Recovery after Format.) For Windows users
Please make backup files from your Computer.
Insert the Restore CD in the CD-ROM drive. When "Press any key to boot from CD..." message appears on the screen, press the [Enter] key.
Follow the instructions to install the Widows operating system.
After the installation is complete, remove the Recovery CD from your computer and then restart the computer. Start the registration procedure by following instruc tions on the screen. After the Windows operating system installation is complete, install the LG GILJABI CD (software installation CD) on your computer, and then you can use all application programs and device drivers. 58 System Recovery To install Windows XP upgrade 1. If Windows XP is already installed on your computer, simply install Widows XP for upgrade purpose without formatting hard disk. 2. If you have Windows Operating system running on your computer, follow the instructions to install Windows XP upgrade.
Turn on the computer that has Windows XP installed.
Click [Start] and then select [Run].
Insert Recovery CD on your computer, and then type D:i386winnt32.exe/unat-
tend on the [Run] dialogue box and press [OK].
(In case CD-ROM drive is located at (D:) Note
If winnt32.exe is applied without
"unattend"option, Input Product key number, written on the com puter. You should register Windows XP OS in 30days. System Recovery 59 5.Reinstalling the driver 5-1.Reinstalling the print driver After connecting a printer, you should istall the printer driver. Windows XP auto-
matically recognize the printer driver. If the printer driver does not function correct-
ly, re install the printer driver by following instructions.
[Start] - [Control panels] - [Switch to classic view].
Double-click [Printer&Fax] icon.
If the following dialogue box appears, select [Add a printer].
After "Welcome to the add printer Wizard" dialogue box appears,click [Next]. 60 Reinstalling the driver
Select [Local or Network Printer] and then click [Next].
[New Printer Detection] dialogue box appears, click [Next].
Select LPT1 and then click [Next].
Select Manufacturer and printer, and then click [Next]. If your computer came with an installation disk, click [Have Disk]. Reinstalling the driver 61
[Have disk] button was selected
Insert the manufacturer's installation disk, and then make sure that the correct drive is selected bellow.
[Next] button was selected
You must assign a Printer name, and then click [Next].
Print Test Page appears, click [Yes] and then press [Next]. 62 Reinstalling the driver
Test page is now printing, click [OK].
If followig dialogue box appears, click [Finish].
Adding the new printer process is now completed. Reinstalling the driver 63 5-2.Reinstalling the sound device driver Sound driver enables you to listen music files and CD from your computer. Sound driver is came with your computer. But if the computer does not recognize the sound driver, you should re-install the sound driver.
Turn on the computer and the moitor.
Insert LG Giljabi CD into the CD-ROM drive, and then select the sound driver.
Sound driver installation starts. complete the processs by the instructions on the screen. 64 Reinstalling the driver 5-3.Reinstalling the video driver Video driver is came with your computer. But if the computer does not recognize the sound driver, you should re-install the sound driver.
Turn on the computer and the monitor.
Insert LG Giljabi CD into the CD-ROM drive, and then select the video driver.
Video driver installation starts. complete the process by the instructions on the screen. Reinstalling the driver 65
1 | USERS MANUAL 4 | Users Manual | 3.44 MiB |
6. System Expansion 6-1. Opening the computer case Always consult with your service representatives before opening the computer case. Follow the guidelines below when opening the case.
Quit all running programs.
Turn off the computer and monitor, and unplug and remove the power cords.
Keep magnetic objects such as screw driver away from the parts inside the com-
puter.
Open the computer case in a safe, clean area.
The static electricity can damage the parts inside the computer. Touch a bare, unpainted metal part of the computer for 2~3 seconds to remove the static elec-
tricity before opening the computer case.
Always wear gloves to avoid injury when disassembling the computer. Opening and closing the computer case Remove 3 screws from the cover and then push the cover as the direction of the arrow. Push the cover in the direction of arrow as it aligns the groove of com-
puter cover with body shown on the picture and fasten 3 screws. Make sure that there is no metallic object left inside the computer before closing the case. There is the risk of electric shock or fire. 66 System Expansion 6-2. Main board The main board determines the model name of your computer. Check the model name on a label located at the rear of your computer before system expansion.
PCI slot
AGP slot
CPU socket
Memory socket (DIMM)
Floppy disk connector
Hard disk/CD-ROM connector
Note
The main board in your computer may look different from the picture. System Expansion 67 6-3. Connectors The peripheral devices are connected to the main board through the connectors shown below. (The main board in your computer may look different from the picture below)
Before removing the connector, check the status of connection and make a note.
Aline the groove to the right direction when connecting floppy disk drive connector, hard disk/CD-ROM connector.
Match the pin number with the color of cable. There is a risk of disfunction to the computer.
There is a risk of explosion if battery is replaced by an incorrect type. Dispose of used batter-
ies according to the instructions.
There is a risk of explosion if the backup(standby) RTC battery is replaced by an incorrect type.
Dispose of used backup(stadby) RTC battery according to your local ordinances or regulation. 68 System Expansion
Power switch, power/ hard disk activity LED connector (JFP1)
Power connector (CONN1: 20 pins) connects power switch and hard disk activity LED . ATX1 connects to the power. JFP1
Hard disk/CD-ROM drive connectors
(IDE1, IDE2: 40 pins)
Floppy disk drive connector(FDD1: 34 pins) IDE connector connects hard disk and CD-ROM drive. If only one hard disk is connected, it should be connected to IDE1 hard disk connector. IDE1 IDE2 FDD1 connects to the floppy disk drive.
Power connector(JPW1: 4 pins)
USB connector(JUSB1: 10 pins) connects to the power supply. connects to the USB on the front of the comput-
er. JPW1 JUSB 1
IEEE1394 connector(J1394 : 7pins)
Audio connector(JAUD1: 7 pins) connects to the IEEE 1394(7 pins) on the front of the computer. J1394 JAUD1 connects to the head-
phone and microphone jacks on the front of the computer.
CPU fan(CPU_FAN: 3 pins)
System fan (SYSTEM_FAN) connects and supplies power to the CPU fan. CPU_FAN SYSTEM_FAN connects and supplies power to the system fan at the bottom of the computer. System Expansion 69 6-4 Replacing the CPU The shape and replacement method of the CPU fan may be different depending on the model.
Clamps on both sides of the CPU fasten the fan tightly to the CPU socket. raise the handle, release the clamps, and then spread them outward. Align the groove to the right position, pins can easily be broken.
After releasing the clamps, lift and remove the CPU fan from the socket.
Raise the handle on the CPU socket to unlock the CPU. 70 System Expansion
Lift the CPU straight up. Be careful not to damage the pins at the bottom of the CPU.
Align the identifying marks at the corners of the new CPU and socket, and careful-
ly install the CPU in the socket. Lower the handle to lock the CPU in place.
Lower the handle as shown picture and lock the clamps as shown picture . In a specific system, clamps are not fully open. Raise the CPU fan from the fully opened space. To assemble it, install from the opposite side.
System Expansion 71 Replacing CPU
While pressing the both sides of the clamps as , raise the fan to the direction of to release the clamps.
After releasing the clams, raise the CPU fan to remove.
Release the CPU socket as the direction of arrow. 72 System Expansion
Raise the CPU as the direction of arrrow.
Align the identifying marks at the corners of the new CPU and socket, and care-
fully install the CPU in the socket. Lower the handle to lock the CPU in place.
Push the both side of clamps after align the grooves to the clamps. Please gentely push clamps not to make it broken. the System Expansion 73 6-5. Increasing the memory If you run out of memory while using the computer, you may want to increase the amount of memory in your computer. About memory Your computer uses DDR(Double Data Rate) SDRAM DIMM(Dual In-Line Memory Module) with 184 pins. Your computer supports Unbuffered DDR SDRAM DIMM of 256MB up to 512MB in size in each socket, and 2GB total. Note
Windows 95, 98SE, ME supports memory up to 512MB total. Increasing the memory beyond 512MB in these systems may cause errors while using the computer. Before increasing the memory
Always wear gloves to avoid injury when disassembling the computer
Static electricity can damage memory modules be sure to minimize the static electricity when replacing memory.
Make sure to replace the memory of the same type as the installed memory.
DIMM is different from SIMM in that it is configured for 64 bit operation; there-
fore, your computer can operate with only one DIMM installed. Note
Use a 2.5V DDR SDRAM DIMM.(The shape of the memory may be different depending on the model) DDR SDRAM enhances the rate of data transmission of the SDRAM and looks different from SDRAM. DDR 74 System Expansion
Your computer supports PC2700/3200 DDR memory.
Use Unbuffered DDR SDRAM DIMM only to increase the memory.
Dual channel mode operates when each identical memory is installed in the same color of DIMM slot. FSB Frequency Supported memory type 533/800MHz PC2700/3200-DDR SDRAM 333/400MHz Purchasing a memory Check the type of memory installed in your computer and refer to the memory configura-
tion chart before purchasing a memory. Specification: PC2700/3200(184 pin DDR SDRAM DIMM) Speed Size
: 333MHz(166MHz X 2), 400MHz(200MHz X 2)
: 256MB, 512MB Memory configuration chart Total memory DIMM 1 DIMM 2 DIMM 3 DIMM 4 DUAL/SINGLE 256MB 512MB 1024MB 256MB 256MB 512MB 2048MB 512MB 256 256MB 512 (1/4) 256MB 512MB 512MB 256MB 256MB 512MB 512MB 256MB 256MB 512MB 512MB SINGLE DUAL DUAL SINGLE DUAL DUAL DUAL DUAL Note
Dual channel improves the efficiency of the system.
Each identical memory should be used for dual channel setting.
Dual channel setting is recommended. System Expansion 75 Replacing the memory The main board configuration, memory socket, and the shape of memory may be different depending on the model.
Remove the screws on the real of the computer, and open the com puter case. Note
Before opening the case, turn off the computer and peripheral devices, and remove the power cords.
Pull the latch on each side of a memory socket to release the memory. Latch Installing a memory
Pull the latch on each side of a memory socket. Note
For dual channel system, each mem ory should be installed in independent slot(1&3 slot or 2&4 slot) when using DDR Memory It is recognized as a single channel if there is a difference between dual channel 1 and 3, 2 and 4.
Firmly push the latch to lock the memory.
Align the notch at the bottom of the memory with a protrusion in the middle of the socket, and then insert the memory straight down. 76 System Expansion Checking the size of the installed memory The computer automatically recognizes the newly installed memory; therefore, you do not need to change the system setup. Follow the instruction below to check the size of the installed memory.
Connect the power cord and other devices, and turn on the computer and monitor. The following screen appears to inspect the status of the computer.
If the following screen appears, press [Esc]. POST screen appears.
If the following screen appears, press [Pause] key to pause the screen. Make sure [Memory Testing : XXXXXX OK] appears. Award Modular BIOS vX.XXXX, An Energy Star Ally Copyright(C) 1984-2004, Award Software, Inc. Build ID : LG XXXX XX.XX XX:XX:XX Main Processor : Intel(R) Pentium(R) X Processor XXXMHz Memory Test : XXXXXX OK
Press DEL to enter SETUP XX/XX/XX-XXXX-XXXX-XXXXXXXXX-XX Note
To stop the logo screen for a moment, press [Delete] key Advanced BIOS Features Full Screen Logo Show Selectable, and then select Disable.
After check the memory, press [Esc]. Windows screen appears. System Expansion 77
1 | USERS MANUAL 5 | Users Manual | 1.16 MiB |
Hard disk drive setup
Turn on the computer and monitor.
Press [Delete]key when the logo screen appears.
The CMOS Setup Utility opens. Phoenix-Award BIOS CMOS Set up Utility
Standard CMOS Features
Advanced BIOS Features
Advanced Chipset Features
Integrated Peripherals
Power Management Setup
PnP/PCI Configurations
PC Health Status
Frequency/Voltage Control Load Optimized Defaults Set Password Save & Exit Setup Exit Without Saving Esc : Quit F10 : Save & Exit Setup
: Select ltem Virus Protection, Boot Sequence...
Use arrow , and keys to select Standard CMOS Features, and press [Enter]. 78 System Expansion
Use arrow , and keys to select IDE Channel 0 Slave, and press
[Enter]. Phoenix-Award BIOS CMOS Set up Utility Standard CMOS Features Data (mm:dd:yy) Time (hh:mm:ss) XXX, XXX, XXXX XX, XX, XX
IDE Channel 0 Master Press EnterXXXXXMB
IDE Channel 0 Slave Press Enter None Press Enter None
IIDE Channel 0 Slave
IDE Channel 1 Master Press Enter None Press Enter None
IDE Channel 1 Slave X.XXM, X.Xin None EGA/VGA All, But Keyboard. X.XXX.XXX.XX Build ID :LG X.XX K X.XX K X.XX K Drive A Drive B Video Halt On CPU Type BIOS Version Video Memory System Memory Total Memory
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5:Previous Values F7:Optimized Defaults
After setting IDE Channel 0 Slave to Auto by pressing [Enter], press [Enter] in IDE HDD Auto-Detection so the system automatically recognizes the newly installed slave hard disk drive. Phoenix-Award BIOS CMOS Set up Utility IDE Channel 0 Slave Item Help Menu Level To auto-detect the HDDs size, head...on this channel IDE HDD Auto-Detection Press Enter
IDE Channel 0 Slave Access Mode Capacity Cylinder Head Precomp Lauding Zome Sector Auto
Auto 0 MB 0 0 0 0 0
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5:Previous Values F7:Optimized Defaults
Press [F10] to save the new setting.
If the following message appears, press [Enter]. The computer restarts. SAVE to CMOS and EXIT(Y/N)? Y System Expansion 79 Hard disk setup (Hard disk with factory default setting) Be careful, Using <diskmgmt.msc> to divide partition delete data in a selected driver.
Click [Start] and [Run].
Type 'diskmgmt.msc' and press [OK].
If the following window appears, select disk1. Click right button on the mouse to select New partition.
Click [Next] if the following message appears. 80 System Expansion
Select a partition and click [Next].
Select the maximum size and click [Next].
Click [Next] after selecting a drive value. A selected space of the disk will be available to use. System Expansion 81
If the following window appears, select File system, Allocation unit size and Volume label ,and click [Next].
New Partition Wizard is complete, click [Finish].
After the format is complete, the hard disk operates normally. 82 System Expansion 6-6. Installing expansion cards When you are using the computer, you may need to install expansion cards to improve funtionality. The following instruction describes how to install expansion cards.
Refer to Opening the computer case to open the computer case cover.
Remove the capas shown on the picture.
Always use a screwdriver to open the case cover. There is the risk of injury.
In order not to be injured when disassembling the computer, wear the gloves.
Remove 2 screws as shown on the picture.
Use the driver and remove the metal slot cover.
(Remove it, only when installing an additional extension card.) System Expansion 83
Hold the expansion card with both hands and align the expansion card and slot. Push down evenly to insert the card into the slot.
Incorrect installation of an expansion card may damage the main board and result in a computer malfunc tion. Expansion slot
Fasten a screw after installing a metal bracket. metal bracket
Using the computer without closing the case may result in fire, electric shock, injury, and/or damage to the computer.
Close the cap in the same position as you removed it.
Refer to Closing the computer case to close the case cover of the computer.
Install the driver program for the new expansion card. 84 System Expansion Specifications *
Specifications below differ depending on the models. CPU System memory Cache memory Hard disk drive Floppy disk driver Intel Pentium 4 / Celeron mPGA478 type (2.4GHz or above) 256MB (up to 2.0 GB) - If built-in VGA is used, maximum 16MB and minimum 1MB is applied for Video Frame buffer in DOS Mode, but Windows Mode automatically manages the video memory (up to 96MB depending on System Memory size). L1: 8KB/16KB or above, L2: 128KB/256KB/512KB/1024KB or above. 40GB or above (E-IDE type) One 3.5inch 1.44MB drive Keyboard Mouse Video Sound LAN USB Serial I/O Front I/O Parallel I/O IEEE1394 Extension slot Product size Cable Power spec Environmental requirement PS/2 keyboard (104keys) PS/2 mouse or USB (ball / wheel) Integrated or external AGP graphic Built-in AC'97 audio. Support MIC-IN, SPEAKER-OUT and LINE-IN.(Support virtual 5.1 channel output) Integrated 10/100Base-T Ethernet 6ports (support USB 2.0) One RS-232C (9pins) Two USB ports and audio ports (SPEAKER-OUT and MIC-IN) One printer port (25pins) One IEEE1394(EG), Not installed(EM) Three PCI slots, one AGP(EG only) slot and four memory DIMM slots Width 100 x Height 345 x depth 421.5(mm). Power cable length 1.8m 100~127 / 200~240VAC, 5A / 4A, 50/60Hz or 200~240VAC. 4A, 50/60Hz Temperature:Average temperature:77(25 Operating temperature:41~95 (5~35 Storage temperature:-4~131-25~55Humidity:Average humidity:60%(RH) Operating humidity:30%~80%(RH)/Storage humidity:30%~80%(RH) Specifications 85
memo 87
88 memo
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2004-12-23 | JBC - Part 15 Class B Computing Device/Personal Computer | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2004-12-23
|
||||
1 | Applicant's complete, legal business name |
LG Electronics USA
|
||||
1 | FCC Registration Number (FRN) |
0023476120
|
||||
1 | Physical Address |
1000 Sylvan Avenue
|
||||
1 |
Englewood Cliffs, New Jersey 07632
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
T******@TIMCOENGR.COM
|
||||
1 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
BEJ
|
||||
1 | Equipment Product Code |
DT-EG
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
K****** H********
|
||||
1 | Title |
Director, Standards & Compliance
|
||||
1 | Telephone Number |
201-4********
|
||||
1 | Fax Number |
201-8********
|
||||
1 |
k******@lge.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | JBC - Part 15 Class B Computing Device/Personal Computer | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | PERSONAL COMPUTER | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Nemko Korea Co., Ltd
|
||||
1 | Name |
H**** K********
|
||||
1 | Telephone Number |
82-33********
|
||||
1 | Fax Number |
82-33********
|
||||
1 |
y******@nemkokorea.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15B |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC