all | frequencies |
|
|
exhibits | applications |
---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User manaul 1 of 2 | Users Manual | 3.76 MiB | ||||
1 |
|
User manual 2 of 2 | Users Manual | 3.20 MiB | ||||
1 | Cover Letter(s) | |||||||
1 | Cover Letter(s) | |||||||
1 | External Photos | |||||||
1 | Internal Photos | |||||||
1 | ID Label/Location Info | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos |
1 | User manaul 1 of 2 | Users Manual | 3.76 MiB |
LCD TV OWNERS MANUAL PLASMA TV LCD TV MODELS 42LH50 47LH50 PLASMA TV MODELS 50PS80 60PS80 Please read this manual carefully before operating your set and retain it for future reference. The model and serial number of the TV is located on the back and one side of the TV. Record it below should you ever need service. Model:
Serial:
This product qualifies for ENERGY STAR in the factory default (Home Use) setting and this is the setting in which power savings will be achieved. Changing the factory default picture setting or enabling other features will increase power consumption that could exceed the limits necessary to quality for Energy Star rating. 1-800-243-0000 USA, Consumer User 1-888-865-3026 USA, Commercial User 1-888-542-2623 CANADA LG Customer Information Center P/NO : SAC33601905 (0903-REV00) www.lgusa.com / www.lg.ca WARNING / CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the litera-
ture accompanying the appliance. WARNING/CAUTION TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. NOTE TO CABLE/TV INSTALLER This reminder is provided to call the CATV system installers attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical. 2 WARNING / CAUTION To prevent fire or shock hazards, do not expose this product to rain or moisture. FCC NOTICE Class B digital device This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause (harmful) interference, and (2) this device must accept any interference received, including interference that may cause unde-
sired operation (of the device). Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. CAUTION Do not attempt to modify this product in any way without written authorization from LG Electronics. Unauthorized modification could void the users authority to operate this product. SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. 6 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 1 2 Do not use this apparatus near water. Clean only with dry cloth. 7 Only use attachments/accessories specified by the manufacturer. 3 Do not block any ventilation openings. Install in accordance with the manufacturers instructions. 8 Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus com-
bination to avoid injury from tip-over. 4 5 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9 Unplug this apparatus during lighting storms or when unused for long periods of time. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong, The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 3 SAFETY INSTRUCTIONS Never touch this apparatus or antenna during a thunder or lighting storm. 15 When mounting a TV on the wall, make sure not to install the TV by the hanging power and signal cables on the back of the TV. Do not allow an impact shock or any objects to fall into the product, and do not drop onto the screen with something. CAUTION concerning the Power Cord:
It is recommend that appliances be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain. Do not connect too many appliances to the same AC power outlet as this could result in fire or electric shock. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. Do not make the TV with the power cord plugged in. Do not use a damaged or loose power cord. Be sure do grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV. 11 12 13 14 4 WARNING - To reduce the risk of fire or electrical shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV with wet hands. Do not install this product near flammable objects such as gasoline or candles or expose the TV to direct air conditioning. 16 Do not expose to dripping or splashing and do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g. on shelves above the unit). 17 18 19 GROUNDING Ensure that you connect the earth ground wire to prevent possible electric shock (i.e. a TV with a three-prong grounded AC plug must be connected to a three-prong grounded AC out-
let). If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes. Power Supply Short-circuit Breaker DISCONNECTING DEVICE FROM MAINS Mains plug is the disconnecting device. The plug must remain readily operable. As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if you turn off this unit by SWITCH. 20 ANTENNAS Outdoor antenna grounding If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of over-
head power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code
(NEC) in the U.S.A. provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna dis-
charge unit, connection to grounding elec-
trodes and requirements for the grounding electrode. Antenna grounding according to the National Electrical Code, ANSI/NFPA 70 Ground Clamp Antenna Lead in Wire Electric Service Equipment NEC: National Electrical Code Antenna Discharge Unit
(NEC Section 810-20) Grounding Conductor
(NEC Section 810-21) Ground Clamps Power Service Grounding Electrode System (NEC Art 250, Part H) 21 22 Cleaning When cleaning, unplug the power cord and scrub gently with a soft cloth to prevent scratching. Do not spray water or other liquids directly on the TV as electric shock may occur. Do not clean with chemicals such as alcohol, thinners or benzene. Moving Make sure the product is turned off, unplugged and all cables have been removed. It may take 2 or more people to carry larger TVs. Do not press against or put stress on the front panel of the TV. 23 24 25 26 27 Ventilation Install your TV where there is proper ventila-
tion. Do not install in a confined space such as a bookcase. Do not cover the product with cloth or other materials (e.g.) plastic while plugged in. Do not install in excessively dusty places. If you smell smoke or other odors coming from the TV or hear strange sounds, unplug the power cord contact an authorized service center. Do not press strongly upon the panel with hand or sharp object such as nail, pencil or pen, or make a scratch on it. Keep the product away from direct sunlight. For LCD TV If the TV feels cold to the touch, there may be a small flicker when it is turned on. This is normal, there is nothing wrong with TV. Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the monitor's performance. Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary dis-
tortion effects on the screen. ON DISPOSAL
(Only Hg lamp used LCD TV) The fluorescent lamp used in this product contains a small amount of mercury. Do not dispose of this product with general household waste. Disposal of this product must be carried out in accordance to the regulations of your local authority. 5 CONTENTS WARNING / CAUTION . 2 Channel Setup
- Auto Scan (Auto Tuning) . 48
- Add / Delete Channel (Manual Tuning) . 49
- Channel Editing . 50 Channel List . 51 Favorite Channel Setup / Favorite Channel List . 52 Brief Information . 53 Input List . 54 Input Label . 55 AV Mode . 56 Simple Manual . 56 Key Lock . 57 SIMPLINK . 58 USB Entry Modes . 60 Photo List . 61 Music List . 65 PICTURE CONTROL Picture Size (Aspect Ratio) Control . 68 Picture Wizard . 70 Preset Picture Settings (Picture Mode) . 72 Manual Picture Adjustment - User Mode . 73 Picture Improvement Technology . 74 Expert Picture Control . 75 Energy Saving . 78 Picture Reset . 79 Power Indicator . 80 Demo Mode . 81 SAFETY INSTRUCTIONS . 3 FEATURE OF THIS TV . 8 PREPARATION Accessories . 9 Front Panel Information . 10 Back Panel Information . 12 Stand Instruction . 14 VESA Wall Mounting . 18 Cable Management . 19 Desktop Pedestal Installation . 21 Swivel Stand . 21 Attaching the TV to a Desk . 22 Kensington Security System . 22 Securing the TV to the wall to prevent falling when the TV is used on a stand . 23 Antenna or Cable Connection . 24 EXTERNAL EQUIPMENT SETUP HD Receiver Setup . 25 DVD Setup . 28 VCR Setup . 30 Other A/V Source Setup . 32 PC Setup . 33 USB Connection . 40 Audio out Connection . 41 WATCHING TV / CHANNEL CONTROL Remote Control Functions . 42 Turning On TV . 44 Channel Selection . 44 Volume Adjustment . 44 Initial Setting . 45 On-Screen Menus Selection . 46 Quick Menu . 47 6 SOUND & LANGUAGE CONTROL APPENDIX Troubleshooting . 110 Maintenance . 112 Product Specifications . 113 IR Codes . 115 External Control Through RS-232C . 116 Open Source License . 122 Auto Volume Leveler (Auto Volume) . 82 Clear Voice II . 83 Preset Sound Setting (Sound Mode) . 84 Sound Setting Adjustment - User Mode . 85 Balance . 86 TV Speakers On/Off Setup . 87 Audio Reset . 88 Stereo/SAP Broadcasts Setup . 89 Audio Language . 90 On-Screen Menus Language Selection . 91 Caption Mode
- Analog Broadcasting System Captions . 92
- Digital Broadcasting System Captions . 93
- Caption Option . 94 TIME SETTING Clock Setting
- Auto Clock Setup . 95
- Manual Clock Setup . 96 Auto On/Off Time Setting . 97 Sleep Timer Setting . 98 PARENTAL CONTROL / RATINGS Set Password & Lock System . 99 Channel Blocking . 102 Movie & TV Rating . 103 Downloadable Rating . 108 External Input Blocking . 109 7 Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. is a trademark of SRS Labs, Inc. TruSurround XT technology is incorporated under license from SRS Labs, Inc. Automatically enhances and amplifies the sound of human voice frequency range to help keep dialogue audible when background noise swells. HDMITM, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing."
Displays HDTV programs in full 1920 x 1080p resolu-
tion for a more detailed picture. FEATURE OF THIS TV High-definition television. High-resolution digital television broadcast and playback system composed of roughly a million or more pixels, 16:9 aspect-ratio screens, and AC3 digital audio. A subset of digital television, HDTV formats include 1080i and 720p resolutions. This TV contains the detailed calibrations necessary for professional certification by the Imaging Science Foundation. The resulting ISF day and night modes will then be accessible by the user to experience the best their LG HDTV has to offer. CALIBRATE LIKE A PRO: Sophisticated and detailed calibrations can be made through the ISFccc mode. Detailed calibration requires a licensed technician. Please contact your local dealer to inquire about an ISF certified technician. The AV Mode optimizes the picture into Cinema, Sports, and game Mode according to the video and audio content. The viewer has the ability to quickly choose the correct mode for the picture they are viewing. LG TV include a unique invisible speaker system, tuned by renowned audio expert, Mr. Mark Levinson. Speakers are embedded in strategic spots behind the front cabinet and use minute vibrations to turn the entire front bezel into the speaker system. The result is a clean, polished look, and enhanced audio by increasing the sweet spot, giving a wider and richer sound field. THX (Thomlinson Holmans Experiment) is the audio and video certification standard of THX established by George Lucas, who directed the movie Star Wars, and Thomlinson. This is the product to be certified in THX display area and guarantees screen quality that exceeds the display standard specification in both hardware and software. IMPORTANT INFORMATION TO PREVENT IMAGE BURN
/ BURN-IN ON YOUR TV SCREEN When a fixed image (e.g. logos, screen menus, video game, and computer display) is displayed on the TV for an extended period, it can become permanently imprinted on the screen. This phenomenon is known as image burn or burn-in. Image burn is not covered under the manufacturers warranty. In order to prevent image burn, avoid displaying a fixed image on your TV screen for a prolonged period
(2 or more hours for LCD, 1 or more hours for Plasma). Image burn can also occur on the letterboxed areas of your TV if you use the 4:3 aspect ratio setting for an extended period. 8 PREPARATION ACCESSORIES Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV. The accessories included may differ from the images below. A V M O D E Q. M E N U P O W E R IN P ENERGYSAVING U T IN F O M E N U E N T E R R E T U R N N ET C A ST M A R K F A V WID G ETS V O L C H A R/N U M D MUTE ELETE 2 A B C 6 M N O 3 D E F C H P A G E 1 4 HI G 5 J K L 7 P Q R S 8 T U V LIS T 0 9 W X Y Z Owners Manual CD Manual Not included with all models R ATIO FREEZE FLASHBK 1.5V 1.5V Remote Control, Batteries Option Extras Power Cord
* Wipe spots on the exterior only with the polishing cloth.
* Do not wipe roughly when removing stain. Excessive pressure may cause scratch or discoloration. When using the VGA (D-sub 15 pin cable) PC connection, the user must use shielded signal interface cables with ferrite cores to maintain standards compliance. D-sub 15 pin Cable
(For 42LH50) Polishing Cloth LCD TV models x 4 Bolts for stand assembly Screw for stand fixing
(Refer to P.16)
(Refer to P.22) Protection Cover
(Refer to P.17) Plasma TV models
(For 50PS80) x 4 x 2 or Bolts for stand assembly
(Refer to P.14) Cable Holder
(Refer to p.19) Protection Cover
(Refer to p.15) Cable management clip
(Refer to p.19) P R E P A R A T O N I 9 PREPARATION FRONT PANEL INFORMATION Image shown may differ from your TV. P R E P A R A T O N I Plasma TV SPEAKER Remote Control Sensor, Intelligent Sensor Adjusts picture according to the surrounding conditions Power/Standby Indicator Illuminates red in standby mode. The LED is off while the TV remains on. 10 CH CH VOL VOL ENTER MENU INPUT CHANNEL (DD,E) Buttons VOLUME (+, -) Buttons ENTER Button MENU Button INPUT Button POWER Button
NOTE G When the TV cannot be turned on with the remote control, press the
(POWER) button on the TV
(The remote control will not work when the
(POWER) button on the TV is switched off). G Do not step on the glass stand or subject it to any impact. It may break, causing possible injury from frag-
ments of glass, or the TV may fall. G Do not drag the TV. The floor or the product may be damaged. LCD TV CH VOL ENTER MENU INPUT CHANNEL (D,E) Buttons VOLUME (+, -) Buttons ENTER Button MENU Button INPUT Button POWER Button SPEAKER Remote Control Sensor, Intelligent Sensor Adjusts picture according to the surrounding conditions Power/Standby Indicator Illuminates red in standby mode. Illuminates blue when the TV is switched on.
(Can be adjusted Power Indicator in the OPTION menu. G p . ?) OFF ON AC power control switch P R E P A R A T O N I 11 PREPARATION BACK PANEL INFORMATION Image shown may differ from your TV. Plasma TV 10 3 2 1 10 LCD TV 3 5 4 AUDIO IN
(RGB/DVI) COMPONENT IN OPTICAL DIGITAL AUDIO OUT
/DVI IN R G B I N
P C
) I
S V D E O I V D E O L
M O N O
) A U D O I R LAN Y P B P R L R I V D E O A U D O I SERVICE ONLY AV IN 1 1 2 I A U D O O U T REMOTE CONTROL IN ANTENNA/
CABLE IN N I B S U 4 N I R I O D U A O N O M L
O E D V I 1 7 2 8 6 AV IN 2 1 2 3 4 5 AV IN 1
/DVI IN LAN VIDEO L
MONO
) AUDIO R RGB IN (PC) 3 2 1 2 1 L R VIDEO COMPONENT IN AUDIO AUDIO IN
(RGB/DVI) OPTICAL DIGITAL AUDIO OUT SERVICE ONLY ANTENNA/
CABLE IN N I B S U 4 N I R I O D U A O N O M L
O E D V I 8 7 6 AV IN 2 9 3 2 9 3 2 P R E P A R A T O N I 12 1 2 3 4 5 LAN Connects a network with an always on broadband connection. AV (Audio/Video) IN Analog composite connection. Supports standard definition video only (480i). HDMI/DVI IN, HDMI IN Digital Connection. Supports HD video and Digital audio. Doesnt support 480i. Accepts DVI video using an adapter or HDMI to DVI cable (not included). RGB IN (PC) Analog PC Connection. Uses a D-sub 15 pin cable
(VGA cable). AUDIO IN (RGB/DVI) 1/8" (0.32 cm) headphone jack for analog PC audio input. OPTICAL DIGITAL AUDIO OUT Digital optical audio output for use with amps and home theater systems. Note: In standby mode, this port doesnt work. 6 7 8 ANTENNA/CABLE IN Connect over-the air signals to this jack. Connect cable signals to this jack. SERVICE ONLY PORT Used by third party devices. COMPONENT IN Analog Connection. Supports HD. Uses a red, green, and blue cable for video & red and white for audio. 9 USB INPUT Used for viewing photos and listening to MP3s. 10 Power Cord Socket For operation with AC power. Caution: Never attempt to operate the TV on DC power. P R E P A R A T O N I 13 PREPARATION STAND INSTRUCTION Image shown may differ from your TV. Plasma TV INSTALLATION (For 50PS80) 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 2 Assemble the TV as shown. 3 Fix the 4 bolts securely using the holes in the back of the TV.
NOTE G When assembling the stand, make sure to distinguish and assemble the front and rear side of the stand correctly. G When assembling the desk type stand, make sure the bolt is fully tightened (If not tightened fully, the TV can tilt forward after the product installation). Do not over tighten. Front P R E P A R A T O N I 14 DETACHMENT 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 2 Loose the bolts from TV. 3 Detach the stand from TV. PROTECTION COVER After removing the stand, install the included protection cover over the hole for the stand. Press the PROTECTION COVER into the TV until you hear it click. P R E P A R A T O N I 15 PREPARATION STAND INSTRUCTION Image shown may differ from your TV. P R E P A R A T O N I LCD TV INSTALLATION 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 2 Assemble the TV as shown. 3 Fix the 4 bolts securely using the holes in the back of the TV.
NOTE G When assembling the desk type stand, make sure the bolt is fully tightened (If not tightened fully, the TV can tilt forward after the product installa-
tion). Do not over tighten. 16 DETACHMENT 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 2 Loose the bolts from TV. 3 Detach the stand from TV. PROTECTION COVER After removing the stand, install the included protection cover over the hole for the stand. Press the PROTECTION COVER into the TV until you hear it click. P R E P A R A T O N I 17 PREPARATION VESA WALL MOUNTING Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact your nearest installer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury. We recommend that you use an LG brand wall mount when mounting the TV to a wall. LG recommends that wall mounting be performed by a qualified professional installer. Product Model VESA (A * B) AA BB Standard Screw Quantity Wall Mounting Bracket
(sold separately) LCD TV 42LH50 47LH50 200 * 200 M6 50PS80 400 * 400 M6 60PS80 600 * 400 M8 PLASMA TV
NOTE 4 4 4 AW-47LG30M AW-50PG60MS AW-60PG60MS G Screw length needed depends on the wall mount used. For further information, refer to the instruc-
tions included with the mount. G Standard dimensions for wall mount kits are shown in the table. G When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided. G Do not use screws longer then the standard dimen-
sion, as they may cause damage to the inside to the TV. G For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ depending on their specifica-
tions. G Do not use screws that do not comply with the VESA standard screw specifications. Do not use fasten the screws too strongly, this may damage the TV or cause the TV to a fall, leading to personal injury. LG is not liable for these kinds of accidents. G LG is not liable for TV damage or personal injury when a non-VESA or non specified wall mount is used or the consumer fails to follow the TV installa-
tion instructions. CAUTION G Do not install your wall mount kit while your TV is turned on. It may result in personal injury due to electric shock. P R E P A R A T O N I 18 CABLE MANAGEMENT Image shown may differ from your TV. Plasma TV 1 Connect the cables as necessary. To connect additional equipment, see the EXTERNAL EQUIPMENT SETUP section. If your TV has the CABLE HOLDER, install it as shown and bundle the cables. 2 Install the CABLE MANAGEMENT CLIP as shown. How to remove the CABLE MANAGEMENT CLIP G Hold the CABLE MANAGEMENT CLIP with both hands and pull it upward. NOTE
G Do not hold the CABLE MANAGEMENT CLIP when moving the TV.
- If the TV is dropped, you may be injured or the product may be broken. CABLE HOLDER CABLE MANAGEMENT CLIP P R E P A R A T O N I 19 PREPARATION CABLE MANAGEMENT Image shown may differ from your TV. LCD TV 1 Connect the cables as necessary. To connect additional equipment, see the EXTERNAL EQUIPMENT SETUP section. P R E P A R A T O N I 2 Install the CABLE MANAGEMENT CLIP as shown. CABLE MANAGEMENT CLIP 3 Put the cables inside the CABLE MANAGEMENT CLIP and snap it closed. 20 DESKTOP PEDESTAL INSTALLATION Image shown may differ from your TV. For proper ventilation, allow a clearance of 4 inches on all four sides from the wall. 4 inches 4 inches 4 inches 4 inches CAUTION G Ensure adequate ventilation by following the clearance recommendations. G Do not mount near or above any type of heat source. SWIVEL STAND After installing the TV, you can adjust the TV set manually to the left or right direction by 20 degrees to suit your viewing position. P R E P A R A T O N I 21 PREPARATION ATTACHING THE TV TO A DESK (For 42LH50) The TV must be attached to a desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product. Stand Desk 1-Screw
(provided as parts of the product) WARNING G To prevent TV from falling over, the TV should be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the machine may cause injury. KENSINGTON SECURITY SYSTEM This feature is not available for all models.
- The TV is equipped with a Kensington Security System connector on the back panel. Connect the Kensington Security System cable as shown below.
- For the detailed installation and use of the Kensington Security System, refer to the users guide provided with the Kensington Security System. For further information, contact http://www.kensington.com, the internet homepage of the Kensington company. Kensington sells security systems for expensive electronic equipment such as note-
book PCs and LCD projectors. NOTE: The Kensington Security System is an optional accessory. P R E P A R A T O N I 22 SECURING THE TV TO THE WALL TO PREVENT FALLING WHEN THE TV IS USED ON A STAND You should purchase necessary components to prevent the TV from tipping over (when not using a wall mount). Image shown may differ from your TV. We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards. Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction, potentially causing injury or damaging the product. Caution: Please make sure that children dont climb on or hang from the TV. P R E P A R A T O N I Insert the eye-bolts (or TV brackets and bolts) to tighten the product to the wall as shown in the picture.
* If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the bolts.
* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes. Secure the wall brackets with the bolts (sold separately) to the wall. Match the height of the bracket that is mounted on the wall to the holes in the product. Ensure the eye-bolts or brackets are tightened securely. Use a sturdy rope (sold separately) to tie the product. It is safer to tie the rope so it becomes horizontal between the wall and the product. NOTE
G Use a platform or cabinet strong enough and large enough to support the size and weight of the TV. G To use the TV safely make sure that the height of the bracket on the wall and the one on the TV are the same. 23 PREPARATION To prevent damage do not connect to the power outlet until all connections are made between the devices. Image shown may differ from your TV. ANTENNA OR CABLE CONNECTION 1. Antenna (Analog or Digital) Wall Antenna Socket or Outdoor Antenna without a Cable Box Connections. For optimum picture quality, adjust antenna direction if needed. P R E P A R A T O N I Wall Antenna Socket Outdoor Antenna
(VHF, UHF) 2. Cable Cable TV Wall Jack Multi-family Dwellings/Apartments
(Connect to wall antenna socket) ANTENNA/
CABLE IN RF Coaxial Wire (75 ohm) Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna) Copper Wire Be careful not to bend the copper wire when connecting the antenna. ANTENNA/
CABLE IN RF Coaxial Wire (75 ohm) To improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly. If the antenna needs to be split for two TVs, install a 2-Way Signal Splitter. If the antenna is not installed properly, contact your dealer for assistance. 24 EXTERNAL EQUIPMENT SETUP To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. Image shown may differ from your TV. HD RECEIVER SETUP This TV can receive digital over-the-air/digital cable signals without an external digital set-top box. However, if you do receive digital signals from a digital set-top box or other digital external device. Component Connection 1. How to connect 1 Connect the video outputs (Y, PB, PR) of the digital set-
top box to the COMPONENT IN VIDEO 1 jacks on the TV. Match the jack colors (Y = green, PB = blue, and PR = red). LCD TV Y PB PR L R 2 Connect the audio output of the digital set-top box to the COMPONENT IN AUDIO 1 jacks on the TV. 1 2 2. How to use Turn on the digital set-top box.
(Refer to the owners manual for the digital set-top box operation.) Select the Component1 input source on the TV using the INPUT button on the remote control. If connected to COMPONENT IN 2 input, select the Component2 input source on the TV. Supported Resolutions Y, CB/PB, CR/PR AV IN 1
/DVI IN VIDEO L
MONO
) AUDIO R 3 2 1 2 1 L R VIDEO COMPONENT IN AUDIO Signal 480i 480p 720p 1080i 1080p Component HDMI Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) Yes Yes Yes Yes Yes No Yes Yes Yes Yes 720x480i 720x480p 1280x720p 1920x1080i 1920x1080p 15.73 15.73 31.47 31.50 44.96 45.00 33.72 33.75 26.97 27.00 28.125 33.71 33.75 56.25 67.432 67.50 59.94 60.00 59.94 60.00 59.94 60.00 59.94 60.00 23.976 24.00 25.00 29.97 30.00 50.00 59.94 60.00 E X T E R N A L E Q U I P M E N T S E T U P 25 EXTERNAL EQUIPMENT SETUP Plasma TV 3 2 1 AUDIO IN
(RGB/DVI) COMPONENT IN OPTICAL DIGITAL AUDIO OUT
/DVI IN R G B I N
P C
) I
S V D E O I V D E O L
M O N O
) A U D O I R 2 1 LAN Y P B P R L R I V D E O A U D O I REMOTE CONTROL SERVICE ONLY AV IN 1 1 2 Y PB PR L R Y, CB/PB, CR/PR Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) 720x480i 720x480p 1280x720p 1920x1080i 1920x1080p 15.73 15.73 31.47 31.50 44.96 45.00 33.72 33.75 26.97 27.00 33.71 33.75 67.432 67.50 59.94 60.00 59.94 60.00 59.94 60.00 59.94 60.00 23.976 24.00 29.97 30.00 59.94 60.00 E X T E R N A L E Q U I P M E N T S E T U P 26 HDMI Connection 1. How to connect 1 2 Connect the digital set-top box to HDMI/DVI IN 1, 2, 3, or 4 jack on the TV. No separate audio connection is necessary. HDMI supports both audio and video. 2. How to use Turn on the digital set-top box.
(Refer to the owners manual for the digital set-top box.) Select the HDMI1, HDMI2, HDMI3, or HDMI4 input source on the TV using the INPUT button on the remote control. LCD TV AV IN 1
/DVI IN VIDEO L
MONO
) AUDIO R RGB IN (PC) 3 2 1 1 L R AUDIO IN
(RGB/DVI) EO OMPONENT IN AUDIO RS-232C IN
(CONTROL&SERVICE)
NOTE G Check HDMI cable over version 1.3. If the HDMI cables dont support HDMI version 1.3, it can cause flickers or no screen display. In this case use the lat-
est cables that support HDMI version 1.3. Plasma TV HDMI-DTV Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) 720x480p 1280x720p 1920x1080i 1920x1080p 31.47 31.50 44.96 45.00 33.72 33.75 26.97 27.00 28.125 33.71 33.75 56.25 67.432 67.50 59.94 60.00 59.94 60.00 59.94 60.00 23.976 24.00 25.00 29.97 30.00 50.00 59.94 60.00 OPT A AN CA AU
(R I
S V D E O 1 HDMI OUTPUT OPTICAL DIGITAL AUDIO OUT
/DVI IN 3 2 1 1 HDMI OUTPUT R G B I N
P C
) I V D E O L
M O N O
) A U D O I R SERVICE ONLY AV LAN E X T E R N A L E Q U I P M E N T S E T U P 27 EXTERNAL EQUIPMENT SETUP LCD TV AV IN 1 L
MONO
) AUDIO R
/DVI IN RGB IN (PC) 3 2 1 1 L R AUDIO ENT IN AUDIO IN
(RGB/DVI) OPTICAL DIGITA AUDIO OUT RS-232C IN
(CONTROL&SERVICE) ANTENNA/
CABLE IN 1 2 DVI to HDMI Connection 1. How to connect 1 2 Connect the DVI output of the digital set-top box to the HDMI/DVI IN 1, 2, or 3 jack on the TV. Connect the digital set-top box audio output to the AUDIO IN (RGB/DVI) jack on the TV. 2. How to use Turn on the digital set-top box.
(Refer to the owners manual for the digital set-top box.) Select the HDMI1, HDMI2, or HDMI3 input source on the TV using the INPUT button on the remote control.
NOTE Plasma TV G A DVI to HDMI cable or adapter is required for this con-
nection. DVI doesn't support audio, so a separate audio connection is necessary. DVI OUTPUT L AUDIO R AUDIO IN
(RGB/DVI) COMPONENT OPTICAL DIGITAL AUDIO OUT
/DVI IN R G B I N
P C
) I
S V D E O I V D E O L
M O N O
) A U D O I R LAN 3 2 1 Y P B P R L R SERVICE ONLY AV IN 1 1 2 1 2 DVI OUTPUT L AUDIO R E X T E R N A L E Q U I P M E N T S E T U P 28 DVD SETUP Component Connection 1. How to connect LCD TV 1 Connect the video outputs (Y, PB, PR) of the DVD to the COMPONENT IN VIDEO 1 jacks on the TV. Match the jack colors (Y = green, PB = blue, and PR = red). Y PB PR L R 2 Connect the audio outputs of the DVD to the COMPONENT IN AUDIO 1 jacks on the TV. 2. How to use Turn on the DVD player, insert a DVD. Select the Component1 input source on the TV using the INPUT button on the remote control. If connected to COMPONENT IN 2 input, select the Component2 input source on the TV. Refer to the DVD player's manual for operating instructions. 1 2 AV IN 1
/DVI IN VIDEO L
MONO
) AUDIO R 3 2 1 A
2 1 L R VIDEO COMPONENT IN AUDIO Component Input ports To get better picture quality, connect a DVD player to the component input ports as shown below. Plasma TV Component ports on the TV Video output ports on DVD player Y Y Y Y Y PB PB B-Y Cb Pb PR PR R-Y Cr Pr 3 2 1 AUDIO IN
(RGB/DVI) COMPONENT IN OPTICAL DIGITAL AUDIO OUT
/DVI IN R G B I N
P C
) I
S V D E O I V D E O L
M O N O
) A U D O I R 2 1 LAN Y P B P R L R I V D E O A U D O I RE CONT SERVICE ONLY AV IN 1 1 2 Y PB PR L R E X T E R N A L E Q U I P M E N T S E T U P 29 EXTERNAL EQUIPMENT SETUP Composite (RCA) Connection LCD TV 1. How to connect 1 Connect the AUDIO/VIDEO jacks between TV and DVD. Match the jack colors (Video = yellow, Audio Left
= white, and Audio Right = red) 2. How to use Turn on the DVD player, insert a DVD. Select the A V 1 or A V 2 input source on the TV using the INPUT button on the remote control. Refer to the DVD player's manual for operating instructions. AV IN 1
/DVI IN VIDEO L
MONO
) AUDIO R 3 2 1 A
2 1 L R VIDEO COMPONENT IN AUDIO 1 VIDEO L R AUDIO Plasma TV AUDIO IN
(RGB/DVI) COMPONENT IN L UT R G B I N
P C
) Y P B P R L R I V D E O A U D O I I
S V D E O I V D E O L
M O N O
) A U D O I R SERVICE ONLY AV IN 1 1 2 I A U D O O U T REMOTE CONTROL IN ANTENNA/
CABLE IN 1 VIDEO L R AUDIO E X T E R N A L E Q U I P M E N T S E T U P 30 S-Video Connection (For Plasma TV) 1. How to connect 1 2 Connect the S-VIDEO output of the DVD to the S -VIDEO input on the TV. Connect the audio outputs of the DVD to the AUDIO input jacks on the TV. 2. How to use Turn on the DVD player, insert a DVD. Select the A V 1 input source on the TV using the INPUT button on the remote control. Refer to the DVD player's manual for operating instructions. AL AL OUT N R G B I N
P C
) AUDIO IN
(RGB/DVI) COMPONENT IN Y P B P R L R I V D E O A U D O I I
S V D E O I V D E O L
M O N O
) A U D O I R SERVICE ONLY AV IN 1 1 2 I A U D O O U T REMOTE CONTROL IN 1 ANTENNA/
2 CABLE IN L R AUDIO S-VIDEO E X T E R N A L E Q U I P M E N T S E T U P 31 EXTERNAL EQUIPMENT SETUP HDMI Connection 1. How to connect 1 2 Connect the HDMI output of the DVD to the HDMI/DVI IN 1, 2, 3 or 4 jack on the TV. No separate audio connection is necessary. HDMI supports both audio and video. 2. How to use Select the HDMI1, HDMI2, HDMI3, or HDMI4 input source on the TV using the INPUT button on the remote control. Refer to the DVD player's manual for operating instructions.
NOTE G Check HDMI cable over version 1.3. If the HDMI cables dont support HDMI version 1.3, it can cause flickers or no screen display. In this case use the lat-
est cables that support HDMI version 1.3. Plasma TV LCD TV AV IN 1
/DVI IN VIDEO L
MONO
) AUDIO R RGB IN (PC) 3 2 1 1 L R O MPONENT IN AUDIO AUDIO IN
(RGB/DVI) RS-232C IN
(CONTROL&SERVICE) OPTIC AUD ANT CAB 1 HDMI OUTPUT OPTICAL DIGITAL AUDIO OUT
/DVI IN AUDIO IN
(RGB/DVI) COM I
S V D E O R G B I N
P C
) I V D E O L
M O N O
) A U D O I R LAN SERVICE ONLY AV IN 1 1 3 2 1 1 HDMI OUTPUT E X T E R N A L E Q U I P M E N T S E T U P 32 VCR SETUP Antenna Connection 1. How to connect Connect the RF antenna out socket of the VCR to the ANTENNA/CABLE IN sock-
et on the TV. LCD TV RGB IN (PC) UDIO IN RGB/DVI) OPTICAL DIGITAL AUDIO OUT Connect the antenna cable to the RF antenna in socket of the VCR. RS-232C IN
(CONTROL&SERVICE) ANTENNA/
CABLE IN 1 2 2. How to use Set VCR output switch to 3 or 4 and then tune TV to the same channel number. Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owners manual.) Plasma TV I V D E O A U D O I P P L R 2 I U D O O U T REMOTE CONTROL IN ANTENNA/
CABLE IN 1 1 ANT OUT S-VIDEO VIDEO L R AUDIO ANT IN OUTPUT SWITCH Wall Jack 2 Antenna ANT OUT S-VIDEO VIDEO L R AUDIO ANT IN OUTPUT SWITCH Wall Jack 2 Antenna E X T E R N A L E Q U I P M E N T S E T U P 33 EXTERNAL EQUIPMENT SETUP Composite (RCA) Connection 1. How to connect LCD TV 1 Connect the AUDIO/VIDEO jacks between TV and VCR. Match the jack colors (Video = yellow, Audio Left
= white, and Audio Right = red) 2. How to use Insert a video tape into the VCR and press PLAY on the VCR.
(Refer to the VCR owners manual.) Select the A V 1 input source on the TV using the INPUT button on the remote control. If connected to AV IN 2, select AV2 input source on the TV. AV IN 1
/DVI I VIDEO L
MONO
) AUDIO R 3 2 1 2 1 L R VIDEO COMPONENT IN AUDIO 1
NOTE G If you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO jack of the TV. ANT IN S-VIDEO VIDEO L R AUDIO ANT OUT OUTPUT SWITCH Plasma TV AUDIO IN
(RGB/DVI) COMPONENT IN R G B I N
P C
) CAL TAL O OUT AN Y P B P R L R I V D E O A U D O I I
S V D E O I V D E O L
M O N O
) A U D O I R SERVICE ONLY AV IN 1 1 2 I A U D O O U T REMOTE CONTROL IN ANTENNA/
CABLE IN 1 ANT IN S-VIDEO VIDEO L R AUDIO ANT OUT OUTPUT SWITCH E X T E R N A L E Q U I P M E N T S E T U P 34 S-Video Connection (For Plasma TV) 1. How to connect 1 2 Connect the S-VIDEO output of the VCR to the S -VIDEO input on the TV. Connect the audio outputs of the VCR to the AUDIO input jacks on the TV. 2. How to use Insert a video tape into the VCR and press PLAY on the VCR.
(Refer to the VCR owners manual.) Select the A V 1 input source on the TV using the INPUT button on the remote control. PTICAL GITAL DIO OUT LAN R G B I N
P C
) AUDIO IN
(RGB/DVI) COMPONENT IN Y P B P R L R I V D E O A U D O I I
S V D E O I V D E O L
M O N O
) A U D O I R SERVICE ONLY AV IN 1 1 2 I A U D O O U T REMOTE CONTROL IN ANTENNA/
CABLE IN 1 2
NOTE G S-Video provides better quality than composite. Use it when available. ANT IN VIDEO L R S-VIDEO AUDIO ANT OUT OUTPUT SWITCH CAUTION G Do not connect to both Video and S-Video at the same time. In the event that you connect both Video and the S-Video cables, only the S-Video will work. E X T E R N A L E Q U I P M E N T S E T U P 35 EXTERNAL EQUIPMENT SETUP PC SETUP This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. VGA (D-Sub 15 pin) Connection 1. How to connect Connect the VGA output of the PC to the RGB IN
(P C) jack on the TV. Connect the PC audio output to the AUDIO IN
(RGB/DVI) jack on the TV. 1 2 2. How to use Turn on the PC and the TV. Select the RGB-PC input source on the TV using the INPUT button on the remote control. LCD TV 1 UDIO R R DIO 3 2 1
/DVI IN RGB IN (PC) AUDIO IN
(RGB/DVI) OPTICAL DIGITAL AUDIO OUT RS-232C IN
(CONTROL&SERVICE) ANTENNA/
CABLE IN 2 1 AUDIO RGB OUTPUT Plasma TV AUDIO IN
(RGB/DVI) COMPONENT IN R G B I N
P C
) PTICAL IGITAL DIO OUT LAN Y P B P R L R I V D E O A U D O I I
S V D E O I V D E O L
M O N O
) A U D O I R SERVICE ONLY AV IN 1 1 2 I A U D O O U T REMOTE CONTROL IN ANTENNA/
CABLE IN 1 2 RGB OUTPUT AUDIO E X T E R N A L E Q U I P M E N T S E T U P 36 DVI to HDMI Connection 1. How to connect Connect the DVI output of the PC to the HDMI/DVI IN 1, 2, or 3 jack on the TV. Connect the PC audio output to the AUDIO IN
(RGB/DVI) jack on the TV. 1 2 2. How to use Turn on the PC and the TV. Select the HDMI1, HDMI2, or HDMI3 input source on the TV using the INPUT button on the remote control.
NOTE G Check HDMI cable over version 1.3. If the HDMI cables dont support HDMI version 1.3, it can cause flickers or no screen display. In this case use the lat-
est cables that support HDMI version 1.3. LCD TV AV IN 1
/DVI IN VIDEO L
MONO
) AUDIO R RGB IN (PC) 3 2 1 L R O MPONENT IN AUDIO AUDIO IN
(RGB/DVI) RS-232C IN
(CONTROL&SERVICE) OPTIC AU ANT CAB 1 2 DVI OUTPUT AUDIO Plasma TV AUDIO IN
(RGB/DVI) COMPONENT OPTICAL DIGITAL AUDIO OUT
/DVI IN R G B I N
P C
) I
S V D E O I V D E O L
M O N O
) A U D O I R LAN 3 2 1 Y P B P R L R SERVICE ONLY AV IN 1 1 2 1 2 DVI OUTPUT AUDIO E X T E R N A L E Q U I P M E N T S E T U P 37 EXTERNAL EQUIPMENT SETUP
NOTES G To get the the best picture quality, adjust the PC G The synchronization input form for Horizontal and graphics card to 1920x1080. Vertical frequencies is separate. G Depending on the graphics card, DOS mode may not work if a HDMI to DVI Cable is in use. G In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or bright-
ness. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the PICTURE menu until the picture is clear. G Avoid keeping a fixed image on the screen for a long period of time. The fixed image may become permanently imprinted on the screen. G Depending on the graphics card, some resolution settings may not allow the image to be posi-
tioned on the screen properly. G If there are overscan in HDMI-PC 1920x1080, change aspect ratio to Just scan. G When selecting HDMI-PC, set the Input Label -
PC in the OPTION menu. G The TV provides EDID data to the PC system with a DDC protocol. DDC protocol is preset for RGB (Analog RGB), HDMI (Digital RGB) mode. E X T E R N A L E Q U I P M E N T S E T U P 38 Supported Display Specifications (RGB-PC, HDMI-PC) LCD TV Plasma TV Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) 640x350 31.468 640x350 31.468 720x400 31.469 640x480 31.469 800x600 37.879 1024x768 48.363 1280x768 1360x768 47.776 47.712 1280x1024 63.981 1600x1200 75.00 70.09 70.08 59.94 60.31 60.00 59.87 60.015 60.02 60.00 1920x1080 RGB-PC 1920x1080 HDMI-PC 66.587 59.934 67.5 60.00 70.09 70.08 59.94 72.80 75.00 56.25 60.31 72.18 75.00 60.00 70.06 75.02 59.87 74.893 60.015 60.02 75.025 60.00 31.469 31.469 37.861 37.50 35.156 37.879 48.077 46.875 48.363 56.476 60.023 47.776 60.289 47.712 63.981 79.976 75.00 720x400 640x480 800x600 1024x768 1280x768 1360x768 1280x1024 1600x1200 1920x1080 RGB-PC 1920x1080 HDMI-PC 66.587 59.934 67.5 60.00
* Only RGB-PC mode E X T E R N A L E Q U I P M E N T S E T U P 39 EXTERNAL EQUIPMENT SETUP Screen Setup for PC mode Selecting Resolution You can choose the resolution in RGB-PC mode. The Position, Phase, and Size can also be adjusted. PICTURE Move Enter SCREEN Move Prev. E 50 50 50 50 0 Contrast Brightness Sharpness Color Tint Advanced Control Picture Reset R G Screen (RGB-PC) Resolution Auto Config. 1024 x 768 1280 x 768 1360 x 768 Position Size Phase Reset Select PICTURE. Select Screen (RGB-PC). Select Resolution. Select the desired resolution. 1 MENU 2 3 4 5 ENTER ENTER ENTER ENTER E X T E R N A L E Q U I P M E N T S E T U P 40 Auto Configure Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still not correct, try using the manual settings or a different resolution or refresh rate on the PC. PICTURE Move Enter SCREEN Move Prev. E 50 50 50 50 0 Contrast Brightness Sharpness Color Tint Advanced Control Picture Reset R G Screen (RGB-PC) Resolution Auto Config. Position Size Phase Reset To Set Yes No 1 MENU Select PICTURE. 2 3 4 5 ENTER Select Screen (RGB-PC). ENTER Select Auto Config.. ENTER Select Y e s. ENTER Start Auto Configuration. If the position of the image is still not correct, try Auto adjustment again. If picture needs to be adjusted again after Auto adjustment in RGB-PC, you can adjust the P o s i t i o n, S i z e or Phase. E X T E R N A L E Q U I P M E N T S E T U P 41 EXTERNAL EQUIPMENT SETUP Adjustment for screen Position, Size, and Phase If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually. This feature operates only in RGB-PC mode. PICTURE Move Enter SCREEN Move Prev. E 50 50 50 50 0 Contrast Brightness Sharpness Color Tint Advanced Control Picture Reset R G Screen (RGB-PC) Resolution Auto Config. Position Size Phase Reset F D E G 1 MENU Select PICTURE. 2 3 4 5 ENTER ENTER Select Screen (RGB-PC). Select Position, S i z e, or Phase. ENTER Make appropriate adjustments. ENTER Position: This function is to adjust pic-
ture to left/right and up/down as you prefer. S i z e: This function is to minimize any vertical bars or stripes visible on the screen background. And the horizontal screen size will also change. P h a s e: This function allows you to remove any horizontal noise and clear or sharpen the image of characters. E X T E R N A L E Q U I P M E N T S E T U P 42 Screen Reset (Reset to original factory values) Returns Position, S i z e, and Phase to the default factory settings. This feature operates only in RGB-PC mode. PICTURE Move Enter SCREEN Move Prev. E 50 50 50 50 0 Contrast Brightness Sharpness Color Tint Advanced Control Picture Reset R G Screen (RGB-PC) Resolution Auto Config. Position Size Phase Reset To Set Yes No 1 MENU Select PICTURE. 2 3 4 5 ENTER ENTER Select Screen (RGB-PC). Select Reset. ENTER Select Y e s. ENTER E X T E R N A L E Q U I P M E N T S E T U P 43 EXTERNAL EQUIPMENT SETUP OTHER A/V SOURCE SETUP 1. How to connect 1 Connect the AUDIO/VIDEO jacks between TV and external equipment. Match the jack colors.
(Video = yellow, Audio Left = white, and Audio Right = red) 2. How to use Select the A V 2 input source on the TV using the INPUT button on the remote control. If connected to AV IN 1 input, select the A V 1 input source on the TV. Operate the corresponding external equipment. Camcorder Video Game Set VIDEO L R 1 N I B S U 4 N I R I O D U A O N O M L
O E D V I AV IN 2 USB CONNECTION 1. How to connect 1 Connect the USB device to the USB I N jack on the side of TV. 2. How to use After connecting the USB I N jack, you use the USB func-
tion. (G p.60) or 1 Memory Key N I B S U 4 N I I R O D U A O N O M L
O E D V I AV IN 2 E X T E R N A L E Q U I P M E N T S E T U P 44 AUDIO OUT CONNECTION Send the TVs audio to external audio equipment via the Audio Output port. If you want to enjoy digital broadcasting through 5.1-channel speakers, connect the OPTICAL DIGITAL AUDIO OUT terminal on the back of TV to a Home Theater (or amp). Analog (For Plasma TV) 1. How to connect Plasma TV AUDIO IN
(RGB/DVI) COMPONENT IN 1 2 Connect audio outputs to the TVs AUDIO OUT jacks. Set the TV Speaker option - Off in the AUDIO menu. (G p.93). See the external audio equipment instruction manu-
al for operation. CAL TAL OUT N Digital 1. How to connect R G B I N
P C
) I A U D O O U T Y P B P R 1 L R I V D E O A U D O I I A U D O O U T REMOTE CONTROL IN ANTENNA/
CABLE IN I
S V D E O I V D E O L
M O N O
) A U D O I R SERVICE ONLY AV IN 1 1 2 1 2 3 Connect one end of the optical cable to the TV port of OPTICAL DIGITAL AUDIO OUT. L R AUDIO Connect the other end of the optical cable to the digital audio input on the audio equipment. LCD TV Set the TV Speaker option - Off in the AUDIO menu.
(G p.87). See the external audio equipment instruction manual for operation.
NOTE G When connecting with external audio equipment, such as amplifiers or speakers, you can turn the TV speakers off in the menu. (G p . ?) R R 3 2 1
/DVI IN RGB IN (PC) AUDIO IN
(RGB/DVI) RS-232C IN
(CONTROL&SERVICE) OPTICAL DIGITAL AUDIO OUT 1 ANTENNA/
CABLE IN CAUTION 2 G Do not look into the optical output port. Looking at the laser beam may damage your vision. G Audio with ACP (Audio Copy Protection) function may block digital audio output. E X T E R N A L E Q U I P M E N T S E T U P 45 EXTERNAL EQUIPMENT SETUP NETWORK SETUP This TV can be connected to a local area network (LAN) via the LAN port. After making the physical connec-
tion, the TV needs to be set up for network communication. i.e) LCD TV AV IN 1
/DVI IN LAN VIDEO L
MONO
) AUDIO R RGB IN (PC) 3 2 1 2 1 L R VIDEO COMPONENT IN AUDIO 1 AUDIO IN
(RGB/DVI) OPTICAL DIGITAL AUDIO OUT RS-232C IN
(CONTROL&SERVICE) ANTENNA/
CABLE IN Broadband modem Router Broadband Service Broadband modem 1. How to connect Broadband Service 1 Connect the Modem or Router LAN port to the L A N port on the TV. 2. How to use After connecting the LAN port, you use the NETWORK function. (G p.?) Please contact the specifications of your telecommunication carrier or internet service provider for detail information. CAUTION G When plugging or unplugging the LAN cable, hold the plug portion of the cable. When unplugging, do not pull on the LAN cable but unplug while pressing down on the lock. G Do not connect a modular phone cable to the LAN port. G Since there are various connection method, please follow the specifications of your telecom-
munication carrier or internet service provider. E X T E R N A L E Q U I P M E N T S E T U P 46
NOTE G Use a commercially available straight LAN cable
(Category 5/CAT5 or better with RJ45 connec-
tor).???
G By connecting the TV to broadband Internet, you can use Photo and Music list. (G p . 8 7) G Depending on the internet service provider (ISP), the number of devices that can receive internet service may be limited by the applicable terms of service. For details, contact your ISP. G LG is not responsible for any malfunction of the player and/or the internet connection feature due to communication errors/malfunctions associated with your broadband internet connection, or other connected equipment. G LG is not responsible for any trouble in your inter-
net connection. G The features of JPG and MP2 file made available through the internet connection are not created or provided by LG, and LG is not responsible for their functionality or continued availability. Some file related material available by the internet connec-
tion may not be compatible with the TV. If you have questions about such content, please contact the producer of the disc. G Some internet contents may require a higher band-
width connection. G Even if the TV is properly connected and config-
ured, some internet contents may not operate properly because of internet congestion, the qual-
ity or bandwidth of your internet service, or prob-
lems at the provider of the content. G Some internet connection operations may not be possible due to certain restrictions set by the Internet service provider (ISP) supplying your broadband Internet connection. G Any fees charged by an ISP including, without lim-
itation, connection charges are your responsibility. G A 10 Base-T or 100 Base-TX LAN port is required for connection to this TV. If your internet service does not allow for such a connection, you will not be able to connect the TV. G You must use a Router to use xDSL service. G A DSL modem is required to use DSL service and a cable modem is required to use cable modem service. Depending on the access method of and subscriber agreement with your ISP, you may not be able to use the internet connection feature contained in this player or you may be limited to the number of devices you can connect at the same time. (If your ISP limits sub-scription to one device, this player may not be allowed to connect when a PC is already connected.) G The use of a Router may not be allowed or its usage may be limited depending on the policies and restrictions of your ISP. For details, contact your ISP directly. G Your ISP may protect this player from being con-
nected to network when confirming MAC ADDRESS. In that case, contact your ISP to request to initialize MAC ADDRESS. E X T E R N A L E Q U I P M E N T S E T U P 47 WATCHING TV / CHANNEL CONTROL REMOTE CONTROL FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. AV MODE Toggles through preset Video and Audio modes. G p.64 SIMPLINK See a list of AV devices connected to TV. When you toggle this button, the SIMPLINK menu appears at the screen. G p.66-67 POWER Turns the TV on from standby or off to standby. AV MODE POWER INPUT ENERGY SAVING Q. MENU MENU INFO INPUT Rotates through inputs. Also switches the TV on from standby. G p.62 ENTER ENERGY SAVING Adjusts the Energy Saving. G p.?
Q.MENU Opens the list of Quick Menu options. G p.54 MENU Displays the main menu or clears all on-screen displays and return to TV viewing. INFO Displays channel information at the top of the screen. G p.60 NUMBER button
(DASH) Used to enter a program number for multiple program channels such as 2-1, 2-2, etc. LIST Displays the channel table. G p.58 FLASHBK Tunes to the last channel viewed. COLOR KEYS Uses for Yahoo! Widets or Optional functions. RATIO Changes the aspect ratio. G p.?
FREEZE
(For Plasma TV) Freezes the current frame. RETURN NETCAST WIDGETS MARK FAV VOL CHAR/NUM CH MUTE DELETE P A G E 2 ABC 5 JKL 8 TUV 0 3 DEF 6 MNO 9 WXYZ FLASHBK 1 4 GHI 7 PQRS LIST RATIO FREEZE W A T C H I N G T V
C H A N N E L C O N T R O L 48 THUMBSTICK
(Up/Down/Left Right/ENTER) Navigates the on-screen menus and adjusts the system settings to your preference. RETURN Allows the user to move return one step in an interactive application or other user interaction function. NETCAST Select the desired NETCAST menu source. (Yahoo widgets, Netflix, My media) G p.?
WIDGETS WIDGETS for activating and deactivating the platform and widget user interface. G p.?
VOLUME UP
/DOWN Adjusts the volume. FAV Scroll through the programmed Favorite channels. G p.59 MARK Select the input to apply the Picture Wizard settings. G p.?
Use to mark or unmark a photo/music. G p.?
CHAR/NUM Shifts the Character or Number MUTE Switches the sound on or off. G p.50 DELETE
? G CHANNEL UP/DOWN PAGE UP/DOWN Changes the channel. Moves from one full set of screen information to the next one. USB, SIMPLINK Control buttons Controls USB menu (Photo List and Music List.) Controls the SIMPLINK compatible devices. Installing Batteries Open the battery compartment cover on the back side and install the batteries matching correct polarity. Install two 1.5V AAA batteries. Dont mix old or used bat-
teries with new ones. Close cover. W A T C H I N G T V
C H A N N E L C O N T R O L 49 WATCHING TV / CHANNEL CONTROL TURNING ON THE TV 1 2 3 First, connect power cord correctly. And switch the AC power control switch on TV (For LCD TV). At this moment, the TV switches to standby mode. In standby mode to turn TV on, press the
, INPUT, CH (DE or
) button on the TV or press the POWER, INPUT, CH (
or
), Number (0~9) button on the remote control. Select the viewing source by using the INPUT button on the remote control. This TV is programmed to remember which power state it was last set to, even if the power cord is out. When finished using the TV, press the POWER button on the remote control. The TV reverts to standby mode.
NOTE G If you intend to be away on vacation, disconnect the power plug from the wall power outlet. G If you do not complete the Initial setting, it will appear whenever the TV is switched on until the Initial setting procedure is completed. G If the TV is unplugged once or turn off with the AC power control switch or button on the TV, reset the Clock function. W A T C H I N G T V
C H A N N E L C O N T R O L CHANNEL SELECTION 1 Press the CH (
or
) or NUMBER buttons to select a channel number. VOLUME ADJUSTMENT Adjust the volume to suit your personal preference. Press the VOL (+ or -) button to adjust the volume. If you want to switch the sound off, press the MUTE button. You can cancel the Mute function by pressing the MUTE or VOL (+ or -) button. 1 2 3 50 INITIAL SETTING This Function guides the user to easily set the essential items for viewing the TV for the first time when pur-
chasing the TV. It will be displayed on the screen when turning the TV on for the first time. It can also be acti-
vated from the user menus. Default selection is Home Use. We recommend setting the TV to Home Use mode for the best pic-
ture in your home environment. Store Demo Mode is only intended for use in retail environments. Customers can adjust the Picture menu - Picture mode manually while inspecting the TV, but the TV will automatically return to preset in-
store mode after 5 minutes. Store Demo Mode is an optimal setting for displaying at stores. Store Demo mode initializes the TV to set the image quality. Step1. Selecting Language Language English Espaol Franais Previous Next Step2. Mode setting Mode Setting Selecting the environment. Choose the setting mode you want. Store Demo Home Use Select [Home Use] to use this TV at home. To use this TV at Store, select [Store Demo]. Previous Next Select Menu Language. Select Home Use. 1 2 1 3 ENTER ENTER W A T C H I N G T V
C H A N N E L C O N T R O L 51 WATCHING TV / CHANNEL CONTROL Step3. Time setting Time Setting Current Time Setting F Auto G Month Date Year Hour Minute Time Zone Daylight Saving 02 21 2009 10 AM 10 Eastern Auto Previous Next Step4. Network Setting Networking Setting Select the network settings. With the settings, you can use LG NetCast services such as Yahoo! Widgets, Netflix, and YouTube. IP Auto Resetting IP Manual Resetting Skip Previous Set Step5. Auto Tuning Auto Tuning Before starting, be sure that the TV antenna is connected. Previous INFO i Simple Manual Next 1 2 1 2 ENTER 1 ENTER Select Auto or Manual. ENTER Select desired time option. Select IP Auto Resetting. Check your antenna connection and start Auto Tuning.
NOTE You can also adjust Initial Setting in the OPTION menu. W A T C H I N G T V
C H A N N E L C O N T R O L 52 ON-SCREEN MENUS SELECTION Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual. CHANNEL Move Enter PICTURE Move Enter Auto Tuning Manual Tuning Channel Edit Aspect Ratio Picture Wizard
: 16:9 Energy Saving : Off Picture Mode
: Standard Backlight Contrast Brightness Sharpness E 70 90 50 70 OPTION Move Enter
: English
: English Menu Language Audio Language Input Label THX Media Director : Off SIMPLINK
: On Key Lock
: Off Simple Manual Caption
: Off CHANNEL PICTURE AUDIO TIME OPTION LOCK NETWORK INPUT AUDIO Auto Volume Clear Voice II Balance Sound Mode
: On
: On Level Move Enter 3 0
L
R
: Standard SRS TruSurround XT: Off Treble Bass 50 50 E TIME Clock Off Time On Time Sleep Timer Move Enter
: Off
: Off
: Off E LOCK Move Enter NETWORK Move Enter INPUT Move Enter Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block Lock System : Off Set Password Block Channel TV Rating-English TV Rating-French Downloadable Rating Input Block For USA For Canada Network Setting Software Update ESN TV AV1 AV2 Component1 Component2 RGB-PC HDMI1 HDMI2 E E 1 MENU Display each menu.
NOTE 2 3 ENTER Select a menu item. ENTER Accept the current selection. 4 MENU Return to TV viewing. G ISM Method, THX Media Director:
Only Plasma TV. G Backlight, Power Indicator: Only LCD TV. W A T C H I N G T V
C H A N N E L C O N T R O L 53 WATCHING TV / CHANNEL CONTROL QUICK MENU Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. Q.Menu (Quick Menu) is a menu of features which users might use frequently. F Aspect Ratio G A 16:9 Aspect Ratio: Selects your desired picture format. P i c t u r e M o d e: Selects the factory preset picture depend on the viewing environment. Sound Mode: Selects the factory preset sound for type of program. Multi Audio: Changes the audio language (Digital signal). SAP: Selects MTS sound (Analog signal). Sleep Timer: Select the amount of time before your TV turns off automatically. Del/Add/Fav: Select channel you want to add/delete or add the channel to the Favorite List. Caption: Select on or off. USB Device: Select Eject in order to eject a USB device. A 1Q. MENU 2 3Q. MENU Display each menu. Make appropriate adjustments. Return to TV viewing. W A T C H I N G T V
C H A N N E L C O N T R O L 54 CHANNEL SETUP Auto Scan (Auto Tuning) Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list. Move Enter CHANNEL Auto Tuning Manual Tuning Channel Edit Move Enter CHANNEL Auto Tuning Manual Tuning Channel Edit Check your antenna connection. The previous channel information will be updated during Auto Tuning. Yes No The TV will ask for a password if parental control has been activated (LOCK Menu). Use the password you set up in the LOCK Menu to allow a channel search. 1 MENU ENTER ENTER 2 3 4 Select CHANNEL. Select Auto Tuning. Select Y e s. ENTER Run Auto tuning. 5RETURN MENU Return to the previous menu. Return to TV viewing. W A T C H I N G T V
C H A N N E L C O N T R O L 55 WATCHING TV / CHANNEL CONTROL Add/Delete Channel (Manual Tuning) When selecting DTV or CADTV input signal, you can view the on-screen signal strength monitor to see the qual-
ity of the signal being received. Move Enter CHANNEL Auto Tuning Manual Tuning Channel Edit CHANNEL Auto Tuning Manual Tuning Channel Edit Move Enter F DTV G Select channel type and RF-channel number. Channel DTV 2-1 2 Bad Normal Good Delete Close The TV will ask for a password if parental control has been activated (LOCK Menu). Use the password you set up in the LOCK Menu to allow a channel search. 1 MENU ENTER ENTER 2 3 4 5 6RETURN MENU Select CHANNEL. Select Manual Tuning. Select D T V, T V, CADTV, or C A T V. Select channel you want to add or delete. ENTER Select A d d or Delete. Return to the previous menu. Return to TV viewing. W A T C H I N G T V
C H A N N E L C O N T R O L 56 Channel Editing The channels in the Channel Edit List are displayed in black and the channels deleted from the Channel Edit List are displayed in blue. When a channel number is deleted, it means that you will be unable to select it using CH viewing. If you wish to select the deleted channel, directly enter the channel number with the NUMBER buttons or select it in the Channel Edit menu. button during TV Ch. Change Navigation CH Page Change Previous Add/Delete Move Enter CHANNEL Auto Tuning Manual Tuning Channel Edit 1 MENU Select CHANNEL. ENTER Select Channel Edit. ENTER Select a channel. 2 3 4 BLUE Add or delete a channel. 5RETURN Return to the previous menu. MENU Return to TV viewing. W A T C H I N G T V
C H A N N E L C O N T R O L 57 WATCHING TV / CHANNEL CONTROL CHANNEL LIST You can check which channels are stored in the memory by displaying the channel list. This padlock is displayed when the channel is locked with parental control. Channel List DTV DTV DTV 2-1 3-1 4-1 Exit Displaying Channel List 1 Display the Channel List. LIST Selecting a channel in the channel list 1 Select a channel. 2 ENTER Switch to the chosen channel number. Paging through a channel list 1 CH P A G E 2RETURN Turn the pages. Return to TV viewing. W A T C H I N G T V
C H A N N E L C O N T R O L 58 FAVORITE CHANNEL SETUP Favorite Channels are a convenient feature that lets you quickly select channels of your choice without waiting for the TV to select all the in-between channels. To tune to a favorite channel, press the F A V (Favorite) button repeatedly. F Del/Add/Fav G 1 CH P A G E or 1 4 GHI 7 PQRS 3 DEF 6 MNO 9 WXYZ 2 ABC 5 JKL 8 TUV 0 Select your desired channel. A Favorite 2Q. MENU 3 4Q. MENU Select Del/Add/Fav. Select Favorite. Return to TV viewing. FAVORITE CHANNEL LIST Favorite List DTV DTV DTV 2-1 3-1 4-1 Displaying the favorite channel list 1 MARK Display the Favorite channel list. FAV CHAR/NUM Selecting a channel in the favorite channel list 1 Select a channel. Exit 2 ENTER Switch to the chosen channel number. Paging through a favorite channel list 1 CH P A G E 2RETURN Turn the pages. Return to TV viewing. W A T C H I N G T V
C H A N N E L C O N T R O L 59 WATCHING TV / CHANNEL CONTROL BRIEF INFORMATION Brief Info shows the present screen information. 1INFO i 2RETURN Show the Brief Info on the screen. Return to TV viewing. 7 1 2 3 4 5 6 DOLBY DIGITAL CNN Brief Info Title Test.. Sat, Feb 21, 2009 10:10 AM 11:40 AM 10:40 AM Multilingual CC Caption 1080i TV-PG D L S V 1 2 3 4 5 6 7 Program title Day, Month, Year Program start time Program progress bar Program finish time Present time Banner information CC 4:3 16:9 480i 480p 720p 1080i 1080p Multilingual : The program contains two or more audio services. Use the Q.MENU menu to select wanted Audio. Caption : The program contains one or more caption services. Use the Q.MENU menu to select wanted Closed caption. The original aspect ratio of the video is 4:3 The original aspect ratio of the video is 16:9 (wide) The video resolution is 720x480i The video resolution is 720x480p The video resolution is 1280x720p The video resolution is 1920x1080i The video resolution is 1920x1080p V-Chip: The program contains V-Chip information. Refer to the LOCK menu: A (Age), D (Dialogue), L (Language), S (Sex), V
(Violence), FV (Fantasy Violence) W A T C H I N G T V
C H A N N E L C O N T R O L 60
1 | User manual 2 of 2 | Users Manual | 3.20 MiB |
SIMPLE MANUAL You can easily and effectively access the TV information by viewing a simple manual on the TV. During the Simple Manual operation, audio will be muted. OPTION Move Enter
: English
: English Menu Language Audio Language Input Label THX Media Director : Off SIMPLINK
: On Key Lock
: Off Simple Manual Caption
: Off E Select OPTION. Select Simple Manual. Select the part of the manual you want to see. Return to TV viewing. 1 MENU 2 ENTER 3 ENTER 4RETURN W A T C H I N G T V
C H A N N E L C O N T R O L 61 WATCHING TV / CHANNEL CONTROL INPUT LIST Only these input signals which are connected to a TV can be activated and selected. 1 INPUT ie) ENTER Select the desired input source. You can also select the desired input source in the INPUT menu. TV AV1 AV2 Component1 Component2 HDMI4 HDMI3 HDMI2 HDMI1 RGB-PC Disconnected inputs are inactive (grayed out) TV AV1 AV2 Component1 Component2 Input Label Exit Select a desired input source (except T V). Then, you can select your desired Input Label with using Blue button. G p . 6 3 ie) In case of changing the input label using Blue button VCR Game DVD Set Top Box TV AV1 AV2 Component1 Component2 When new external device is connected, this popup menu is displayed automatically. If selecting Y e s, you can select input source that you want to appreciate. But, when selecting SIMPLINK - O n, popup menu for HDMI input will not be displayed.
New external input is connected. Do you want to use this?
AV2 Yes No T V: Select it to watch over-the-air, cable and digi-
Component: Select them to watch DVD or a tal cable broadcasts. Digital set-top box. A V: Select them to watch a VCR or other external equipment. RGB-PC: Select it to view PC input. H D M I: Select them to watch high definition devices. W A T C H I N G T V
C H A N N E L C O N T R O L 62 INPUT LABEL You can set a label for each input source when it's not in use. OPTION Move Enter OPTION Move Enter
: English
: English Menu Language Audio Language Input Label THX Media Director : Off
: On SIMPLINK Key Lock
: Off Simple Manual Caption
: Off F G
: English
: English AV1 AV2 Menu Language Audio Language Input Label THX Media Director : Off
: On SIMPLINK Key Lock
: Off Simple Manual Caption
: Off RGB-PC HDMI1 Component1 Component2 E E HDMI2 HDMI3 HDMI4 Close With using OPTION menu With using INPUT button 1 MENU ENTER ENTER 2 3 4 5RETURN MENU Select OPTION. Select Input Label. Select the source. Select the label. Return to the previous menu. Return to TV viewing. INPUT 1 2 BLUE 3RETURN MENU Select the source. Select the label. Return to the previous menu. Return to TV viewing. W A T C H I N G T V
C H A N N E L C O N T R O L 63 WATCHING TV / CHANNEL CONTROL AV MODE AV Mode toggles through preset Video and Audio settings. Off Game Cinema or Cinema Sport 1 AV MODE 2 ENTER Press the AV MODE button repeatedly to select the desired source. If you select Cinema /
Cinema in AV mode, Cinema will be selected both for PICTURE menu - Picture Mode and AUDIO menu - Sound Mode respectively. If you select O f f in AV mode, the Picture Mode and Sound Mode return to previous selected value. O f f: Disables the AV MODE. Cinema: Optimizes video and audio for watching movies. Sport: Optimizes video and audio for watching sports events. Ga m e: Optimizes video and audio for playing games. W A T C H I N G T V
C H A N N E L C O N T R O L 64 KEY LOCK The TV can be set up so that it can only be used with the remote control. This feature can be used to prevent unauthorized viewing by locking out the front panel controls. This TV is programmed to remember which option it was last set to even if you turn the TV off. OPTION Move Enter OPTION Move Enter
: English
: English Menu Language Audio Language Input Label THX Media Director : Off
: On SIMPLINK Key Lock
: Off Simple Manual Caption
: Off
: English
: English Menu Language Audio Language Input Label THX Media Director : Off
: On SIMPLINK Key Lock
: Off Simple Manual Caption
: Off Off On E E 1 MENU 2 3 ENTER ENTER 4RETURN MENU Select OPTION. Select Key Lock. Select O n or O f f. Return to the previous menu. Return to TV viewing. In Key Lock O n, if the TV is turned off, press the rr / I, INPUT, CH (DE or
) button on the TV or POWER, INPUT, CH (
) or NUMBER buttons on the remote control. With the Key Lock On, the display
Key Lock appears on the screen if any button on the front panel is pressed while viewing the TV. W A T C H I N G T V
C H A N N E L C O N T R O L 65 WATCHING TV / CHANNEL CONTROL SIMPLINK allows you to control and play other AV devices connected with HDMI cable without additional cables and settings. This TV may work with devices with HDMI-CEC support, but only devices with the logo are fully supported. SIMPLINK can be turned on and off in the user menus. OPTION Move Enter OPTION Move Enter
: English
: English Menu Language Audio Language Input Label THX Media Director : Off
: On SIMPLINK Key Lock
: Off Simple Manual Caption
: Off E
: English
: English Menu Language Audio Language Input Label THX Media Director : Off
: On SIMPLINK Key Lock
: Off Simple Manual Caption
: Off E Off On 1 MENU 2 3 ENTER ENTER 4RETURN MENU Select OPTION. Select SIMPLINK. Select O n or O f f. Return to the previous menu. Return to TV viewing.
NOTE G Connect the HDMI/DVI IN or HDMI IN terminal of the TV to the rear terminal (HDMI terminal) of the SIMPLINK device with the HDMI cable. G When you switch the Input source with the INPUT button on the remote control, the SIMPLINK device will stop. G When you select a device with home theater functionality, the sound output automatically switches to the home theater speakers and the TV speakers are turned off. G If a connected SIMPLINK home theater system doesn't play the audio from the TV, connect the DIGITAL AUDIO OUT terminal on the back of the TV to the DIGITAL AUDIO IN terminal on the back of the SIM-
PLINK device with an OPTICAL cable. W A T C H I N G T V
C H A N N E L C O N T R O L 66 SIMPLINK Functions Direct Play: After connecting AV devices to the TV, you can directly control the devices and play media with-
out additional settings. Select AV device: Enables you to select one of the AV devices connected to TV. Disc playback: Control connected AV devices by pressing the Power off all devices: When you power off the TV, all connected devices are turned off. Switch audio-out: Offers an easy way to switch audio-out. Sync Power on: When the equipment with Simplink function connected HDMI terminal starts to play, The TV
, ENTER, G, A, l l, FF and GG buttons. will change automatically to turn on mode.
(A device, which is connected to the TV through a HDMI cable but does not support SIMPLINK, does not provide this function) Note: To operate SIMPLINK, an HDMI cable over Version 1.3 with *CEC function should be used. (*CEC: Consumer Electronics Control). SIMPLINK Menu 1 2 3 Display SIMPLINK menu. ENTER Select the desired device. ENTER Control connected AV devices. 1 2 3 4 5 TV viewing: Switch to the previous TV channel regardless of the current mode. DISC playback: Select and play discs. When multiple discs are available, the titles of discs are conveniently displayed at the bottom of the screen. VCR playback: Control the connected VCR. HDD Recordings playback: Control recordings stored in HDD. Audio Out to Home Theater speak-
er/Audio Out to TV: Select Home Theater speaker or TV speaker for Audio Out. 1 2 3 4 5 G When no device is connected
(displayed in gray) G Selected Device G When a device is connected
(displayed in bright color) W A T C H I N G T V
C H A N N E L C O N T R O L 67 NETWORK NETWORK SETTING If there is a DHCP server on the local area network (LAN), the TV will automatically be allocated an IP address. If youre using a broadband router orbroadband modem that has a DHCP (Dynamic Host Configuration Protocol) server function, select Auto Resetting. The IP address will automatically be determined. If there is no DHCP server on the network and you want to set the IP address manually, select Manual Resetting. For detail information, contact your internet provider. NETWORK Move Enter NETWORK Move Enter Network Setting Software Update ESN Network Setting Software Update ESN Address Type : Manual Set IP Address
: 192.168.0.10 Subnet Mask : 255.255.255.0 Gateway DNS Server
: 192.168.0.1
: 156.147.135.180 Auto Resetting Manual Resetting Close GG IP Address 192 168 Subnet Mask 255 255 Gateway 192 168 DNS Server 156 147 0 10 255 0 0 1 135 180 Close 1 MENU 2 3 ENTER ENTER Select NETWORK. Select Network Setting. Select Auto Resetting or Manual Resetting. Manual Resetting 4 ENTER 5RETURN MENU 1 4 GHI 7 PQRS 3 DEF 6 MNO 9 WXYZ 2 ABC 5 JKL 8 TUV 0 Input the setting value. Return to the previous menu. Return to TV viewing. N E T W O R K 68 SOFTWARE UPDATE You can update the TV using the latest software to enhance the products operation and/or add new features. You can update the software by connecting the unit directly to the software update server. The Software Update function may not work properly depending on your internet environment. In this case, you can obtain the latest software from the authorized LG Electronics Service Center then update your player. NETWORK Move Enter If there is no update available If newer version exists Network Setting Software Update ESN Checking for update version... No update version is found. Update version is found. Software Netflix Yahoo!
: Checking...
: Checking...
: Checking... Update Cancel Software Netflix Yahoo!
: None
: None
: None Update Cancel Software Netflix Yahoo!
: 03.00.01
: 03.02.03
: 03.02.02 Update Cancel 1 MENU 2 3 ENTER ENTER Select NETWORK. Select Software Update. Start update version checking. If newer version exists, start update. Before updating the software, remove USB Device from the TV. Before updating the software, turn the TV off and then turn it on again. During the software update procedure, do not turn off the TV or disconnect AC power, or do not press any button. If you cancel the update, turn off the TV and turn it on for stable performance. This TV cannot be updated to previous software version. After software update, you can confirm the update software version in ??/ menu. N E T W O R K 69 NETWORK NETFLIX ESN (ELECTRONIC SERIAL NUMBER) We provide you the Netflix ESN (Electronic Serial Number) that allows you to rent and purchase videos using the Netflix website. For more information, please visit: www.netflix.com NETWORK Move Enter NETWORK Move Enter Network Setting Software Update ESN Network Setting Software Update ESN i.e) ESN Number : LGE-42LH500003000005A18E Close 1 MENU 2 ENTER 3RETURN MENU Select NETWORK. Select E S N. The serial number will appear. Return to the previous menu. Return to TV viewing. N E T W O R K 70 NETFLIX Activating TV The TV with Netflix straming capabilities lets you instantly access a library of over 12000 video titles right on our HDTV. Its simple. With high-speed internet access and a Netflix subscription, you have your choice of any Netflix Watch Instantly title to view to home in a matter of seconds. To become a Netflix member visit: www.netflix.com/LG Activating your TV establishes a connection between your TV and your Netflix account. You must activate your TV before you can use it to watch movies streamed over the INTERNET from Netflix. Select NETWORK. Select NETFLIX. no - start my FREE trial 1 2 MENU ENTER 3 ENTER Select yes-activate instant streaming from Netflix if you have an existing account.
"no-start my FREE trial" : If you have no an account, visit http://www.netflix.com/LG on your computer. yes-activate instant streaming from Netflix N E T W O R K 71 4 ENTER Select I'm now a member. 5 On your computer, visit www.netflix.com/activate. Wait for the activation screen to appear on your TV screen. You are now ready to complete activation on the Netflix website. If necessary, enter your Sign in Name and Password to log into your account. 6 Enter the activation code that appears on your TV screen. 7 When the Congratulations screen appears on your TV, youre ready to add movies to your instant Queue. See Filling your instant Queue for instruction. Netflix Deactivation G To deactivates the TV, press the BLUE button on the remote control. NETWORK Watching instant by Netflix After you activate your player, youre ready to add movies & TV episodes to your instant Queue. You can then use your players remote to browse your instant Queue and to select and watch titles on your TV. You will be amazed at how quick and easy it is. Your instant Queue works just like your DVD Queue. Add and manage the movies & TV episodes in your instant Queue from the Netflix website on your computer. Your instant Queue also appears on your TV via your player, so your selections are available to watch anytime. 1 Visit the Netflix website on your computer:
http://www.netflix.com If necessary, enter your Sign in Name and Password to log into your account. 2 Click Watch Instantly. 3 When you find a movie or TV episode you want to watch, mouse over the Add/Play button to reveal additional options, and then click Add to instant Queue. 4 Repeat step 4 to add more movies & TV episodes to your instant Queue. 5
(Optional) Arrange your instant Queue by clicking the Instant subtab. To rearrange your instant Queue, drag and drop the titles in the order you want them, or change the numbers to the left of the titles and then click U p d a t e I n s t a n t Q u e u e to your changes. To remove a title from your instant Queue, click the Remove check box to the right of the title and then click Update Instant Queue to your changes. N E T W O R K 72 The Poster Screen Components It shows box art (title-specific DVD cover or movie poster images) for each of the movie in the members instant queue and allows navigation through that queue using the remote control. The instant queue is a list of movies and TV shows selected previously by the member on the Netflix web site. 1 2 1 2 3 4 5 6 7 Instant Queue Current movie/Total movie Unselected movie Selected movie Selected movie name Running time Parental rating 3 4 5 N E T W O R K The Springboard Screen Components 6 7 It shows a synopsis and other details about the title, and lists actions that can be taken on it (including resuming playback, rating the title, and selecting a different episode if the title has episodes). 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Instant Queue Current movie/Total movie Selected movie name Resume playing Preview selection Evaluation Remove from queue Title box Actor or Actress name Synopsis Running time Making year Parental rating Director Movie type 8 9 10 11 12 1 4 6 7 2 3 5 13 14 15 73 NETWORK Selecting a movie to watch on your TV After you set up your player and add movies & TV episodes, you can browse and watch them on your TV. 1 MENU Select NETWORK. 2 3 4 5 6 7 8 9 ENTER ENTER Select NETFLIX. The instant Queue screen will appear. Move to previous or next movie on your instant Queue. Move to the previous or next page. The selected movie shows the title, rating and total time. Play back the highlighted title. ENTER View details for the highlighted title. Choose any of the menu items Show springboard screen for selected title
(See previous page). Return to your instant Queue. play: Starts playing the selected title. resume playing: Plays a previously paused title from the scene where you paused it. This option is available only if you begin watching a title and then pause it. play from beginning: Starts playing from the beginning of the selected title. choose a different episode (TV series only): Enables you to select a specific show of a TV series. Press b / B to highlight the show you want to view, and then press ENTER to choose it. rate: Enables you to rate a movie or show. The more stars, the higher the rating. Press ENTER to access the rating feature, and then press b /
B to increase or decrease the rating. Press ENTER again to confirm the selected rating. remove: Deletes the selected movie from your instant Queue. remove series (TV series only): Deletes the selected TV series from your instant Queue. N E T W O R K 74 Playing a movie While watching a movie or TV episode from Netflix via your TV, you have full control over your viewing experience. You can use the buttons on the remote to pause and resume viewing and to scan forward and backward, just like when you watch a DVD. While playing a movie, the buttons on the remote do the following:
N E T W O R K Button Operation Starts playing back the movie. To pause a movie while its playing. To resume playing a paused movie, press button again. Stops the movie. Displays your instant Queue. ENTER Pauses playing the movie and enters frame scanning mode. Pauses playing the movie and enters frame scanning mode. To scan forward one frame at a time, press the button again.
NOTE Pauses playing the movie and enters frame scanning mode. To scan backward one frame at a time, press the button again. Pauses playing the movie and scans for-
ward or backward through the movie. To scan faster, press the button again. To play the highlighted scene, press ENTER or G (Play). To resume playing from the point you paused the movie, press
. NETCAST When you have finished watching movies streamed from Netflix, simply press the button on the remote control to go to the NETWORK Menu. G Even if you use a high-resolution setup, audio/video quality may be compromised based on the speed of your broadband internet connection. G Your Internet Service Provider (ISP) determines your broadband speed. We recommend a minimum con-
nection speed of 1.5 Mbps. For the best quality picture, a connection speed of 4.0 Mbps is required. G Sometimes your broadband speed varies based on your ISPs network conditions. Contact your ISP if you have problems maintaining a fast connection that is reliable, or if you want to increase your connection speed. Many ISPs offer a variety of broadband speed options. 75 MY MY MEDIA Entry mode using USB device When you connect a USB device, this pop up menu is displayed automatically. When the Pop Up menu does not appear, you can select Photo List or Music List in the NETWORK menu. In USB device, you can not add a new folder or delete the existing folder. 1 2 3 N E T W O R K Connect the USB device to the USB IN jacks on the TV. This TV supports JPG and MP3 files. When removing the USB device Select the USB Device menu before removing the USB device. 1Q. MENU Select USB Device. 2 ENTER Select Eject. N I B S U 4 N I Memory Key NETCAST Select MY MEDIA. ENTER ENTER Select Ph o t o Li s t or Mu s i c Li s t. i Choose the media you want. Photo List Music List Close Precautions when using the USB device G Only a USB storage device is recognizable. G If the USB storage device is connected through a USB hub, the device is not recognizable. G A USB storage device using an automatic recogni-
tion program may not be recognized. G A USB storage device which uses its own driver may not be recognized. G The recognition speed of a USB storage device may depend on each device. G Please do not turn off the TV or unplug the USB device when the connected USB storage device is working. When such device is suddenly separated or unplugged, the stored files or the USB storage device may be damaged. G Only use a USB storage device which has normal music files or image files. G Please use only a USB storage device which was formatted as a FAT 32 or NTFS file system provid-
ed with the Windows operating system. In case of a storage device formatted as a different utility program which is not supported by Windows, it may not be recognized. G Please connect power to a USB storage device
(over 0.5A) which requires an external power sup-
ply. If not, the device may not be recognized. G Please connect a USB storage device with cable is offered by USB maker. If connected with cable is not offered by USB maker or an excessively long cable, the device may not be recognized. G Some USB storage devices may not be supported or operate properly. G Please backup important files because data on USB device may be damaged. Data management is consumer's responsibility and as a result, the man-
ufacturer does not cover data damage. G If your USB memory device has multiple partitions, or if you use a USB multi-card reader, you can use up to 4 partitions or USB memory devices. G In case of USB storage devices formatted as NTFS, deletion is not allowable. G File alignment method of USB storage device is similar to Window XP and file name can recognize up to 100 English characters. G The recommended capacity is 1TB or less for a USB external hard disk and 32 GB or less for USB memory. G If a USB external hard disk with a Energy Saving function doesnt work, turn the hard disk off and on again to make it work properly. Refer to the user manual of the application USB external hard disk. 76 Entry mode using Network You can view the photo or listen musics in the folder shared by the network. 1 Setup CIFS (Commom Internet File System) in your PC. Click Sharing. Check Share this folder. 2 Connect the Modem or Router LAN port to the LAN port of the TV. AV IN 1 LAN VIDEO L
MONO
) AUDIO R 3 3 NETCAST Select MY MEDIA. 4 ENTER ENTER Select Ph o t o Li s t or Mu s i c Li s t. i Choose the media you want. Photo List Music List Close N E T W O R K 77 NETWORK PHOTO LIST You can view .JPG files from USB storage devices or the folder shared by the network. The On Screen Display on your model may be slightly different. Supported photo file: *.JPG You can play JPG files only. Only baseline scan is supported among JPG. Available JPG size (width x height, pixel): 64 x 64 - 15360 x 8640 Screen Components 1 2 3 4 5 Moves to upper level folder Preview: Display the thumbnail/folder name of the photo in the selected folder Current page/Total pages Total number of marked photos Corresponding buttons on the remote control 2 1 3 4 Page 2/3 No Marked Up Folder Photo List Drive1 butterfly 1366x768, 125KB Up Folder Navigation Popup Menu CH Page Change MARK Mark Exit 5 N E T W O R K 78 Photo Selection and Popup Menu i Choose the media you want. Photo List Music List Close Photo List MULTIMEDIA butterfly Page 1/1 No Marked Drive1 Network 6 folder(s), 1 file (s) Up Folder Navigation Popup Menu CH Page Change MARK Mark Exit Photo List Drive1 butterfly Page 1/1 No Marked Up Folder Photo List Drive1 butterfly Page 1/1 No Marked Up Folder 1366x768, 125KB Up Folder 1366x768, 125KB View Mark All Delete Close 1366x768, 125KB Up Folder Navigation Popup Menu CH Page Change MARK Mark Exit Navigation Popup Menu CH Page Change MARK Mark Exit When you select a file (not folder), this PopUp menu is displayed. G View: Display the selected item. G Mark All: Mark all photos on the screen. G Unmark All: Deselect all marked photos. G Delete: Delete the selected photo item. G Close: Close the pop-up menu. 1 NETCAST 2 3 4 ENTER ENTER ENTER Select MY MEDIA. Select Photo List. Select the target drive or Network.
(It displays the device which con-
nected TV). Select the desired photos. 5 6 ENTER Show the Popup menu. ENTER Select the desired Popup menu. Use the C H photo page. button to navigation in the Use the MARK button to mark or unmark a photo. When one or more photos are marked, you can view individual photos or a slide show of the marked photos. If no photos are marked, you can view all photos individually or all pho-
tos in the folder in a slide show. N E T W O R K 79 NETWORK Full Screen Menu You can change the Photo List view so that it fills the screen. More operations are available in full screen mode. Photo List Drive1 butterfly Page 1/1 No Marked Up Folder 1366x768, 125KB Up Folder Navigation Popup Menu CH Page Change MARK Mark Exit Photo List Drive1 butterfly Page 1/1 No Marked Up Folder 1366x768, 125KB Up Folder 1366x768, 125KB View Mark All Delete Close Navigation Popup Menu CH Page Change MARK Mark Exit Select the target drive or Network. ENTER Select the desired photos. ENTER Show the Popup menu. Select V i e w. 1/17 Slideshow BGM Delete Option Hide The aspect ratio of a photo may change the size of the photo displayed on the screen in full size. ENTER The selected photo is displayed in full size. Use the C H photo page. button to navigation in the N E T W O R K 80 1 2 3 4 5 6 ENTER Select the Slideshow, BGM, Delete, Option, or Hide.
(Rotate), 1/17 Slideshow BGM Delete Option Hide Use button to select the previous or next photo. Use button to select and control the menu on the full-sized screen. G Slideshow: Selected photos are displayed during the slide show. If no photo is selected, all photos in the cur-
rent folder are displayed during slide show. Set the time interval of the slide show in Option. G B G M: Listen to music while viewing photos in full size. Set the BGM device and album in Option. G
(Rotate): Rotate photos. Rotates the photo 90, 180, 270, 360 clockwise. Photo cannot be rotated if its width is greater than the available supported resolution height. G Delete: Delete photos. G Option: Set values for Slide Speed and Music Album. Use values. Then go to the settings. button and ENTER button to set and press ENTER to save Press F G to set the time interval between slides. Slide Speed Music Album Fast
... Enter Cancel You cannot change Music Album while BGM is playing. G Hide : Hide the menu on the full-sized screen. To see the menu again on the full-sized screen, press ENTER button to display. NOTE
G This TV will not be able to decode most JPG images saved using the Progressive option. N E T W O R K 81 NETWORK MUSIC LIST You can use the Music List menu to play MP3 files from a USB storage device or the folder shared by the network This TV cannot play back copy-protected files. The On Screen Display on your model may be slightly different. Supported music file: *.MP3 Bit rate range 32 Kbps - 320 Kbps Sampling rate (Sampling Frequency) MPEG1 layer 3: 32 kHz, 44.1 kHz, 48 kHz MPEG2 layer 3: 16 kHz, 22.05 kHz, 24 kHz MPEG2.5 layer 3: 8 kHz, 11.025 kHz, 12 kHz N E T W O R K Screen Components 1 2 3 4 5 Moves to upper level folder Preview: If any album jacket for the file exists, this jack-
et is displayed. Current page/Total pages Total number of marked musics Corresponding buttons on the remote control 2 1 3 4 Page 2/3 No Marked Title Duration Up Folder Music List Drive1 Aisensi A 00:00 / 04:16 Up Folder Navigation Popup Menu CH Page Change MARK Mark Exit 5 82 Music Selection and Popup Menu i Choose the media you want. Photo List Music List Close Music List MULTIMEDIA Drive1 Page 1/1 No Marked Title Drive1 Network Duration 6 folder(s), 1 file (s) Up Folder Navigation Popup Menu CH Page Change MARK Mark Exit Music List Drive1 Aisensi Page 2/3 No Marked Title Duration Up Folder Music List Drive1 Aisensi Page 2/3 No Marked Title Duration Up Folder A 00:00 / 04:16 Up Folder 3945 KB 128 Kbps Play Play with Photo Mark All Delete Close A 00:00 / 04:16 Up Folder Navigation Popup Menu CH Page Change MARK Mark Exit Navigation Popup Menu CH Page Change MARK Mark Exit 1 NETCAST ENTER ENTER ENTER 2 3 4 5 6 Select MY MEDIA. Select Music List. Select Drive 1 or Network.
(It displays the device which con-
nected TV). Select the desired musics. ENTER Show the Popup menu. ENTER Select the desired Popup menu. N E T W O R K 83 NETWORK Music List Drive1 Aisensi Page 2/3 No Marked Title Duration Up Folder A 00:00 / 04:16 Up Folder Navigation Popup Menu CH Page Change MARK Mark Exit Music List Drive1 Aisensi Page 2/3 No Marked Title Duration Up Folder A 00:00 / 04:16 Up Folder 3945 KB 128 Kbps Play Play with Photo Mark All Delete Close Navigation Popup Menu CH Page Change MARK Mark Exit 1 2 3 4 Select the target folder or drive. ENTER Select the desired musics. ENTER Show the Popup menu. ENTER Select the desired Popup menu. 5RETURN Return to TV viewing. G Play (During stop): Play the selected music. Once a song finishes playing, the next selected one will be played. When there are no selected musics to play, the next one in the current fold-
er will be played. If you go to a different folder and press the ENTER button, the current music in playback will stop. G Play Marked: Play the selected musics. Once a music finishes playing, the next selected one will be played automatically. G Stop Play (During playback): Stop the play-
ing musics. G Play with Photo: Start playing the selected musics and then move to the Photo List. G Mark All: Mark all musics in the folder. G Unmark All: Deselect all marked music. G Delete: Delete the selected music. G Close: Close the pop-up menu. Use the C H button to navigation in the music page. Use MARK button to mark or unmark a music file. If no music is marked, all the music in the folder will be played in sequence. When one or more music files are marked, the marked music files will be played in sequence. If you want to listen to only one song repeatedly, just mark that one file and play. N E T W O R K 84 The play information box (as shown below) will automatically move across the screen when there is no user input to pre-
vent a fixed image remaining on the screen for a extended period of time.
NOTE is displayed in front of the music play time. G When music is playing, G A damaged or corrupted music file that does not play displays 00:00 as the play time. G Music files with copy-protection will not play. G Press ENTER, A , or RETURN button to stop the screen saver. N E T W O R K 85 NETWORK YAHOO!WIDGETS You can enjoy widget on your TV and available to select a useful snippets in dock,at the bottom of your TV. These snippets contain updated weather, sports score, updated stock, and view photo/video. OOBE (Out-of-Box-Experience) 5 6 7 ENTER Select the alphabet. ENTER Select Save this name. ENTER Select Ok, I accept. 1 NETCAST ENTER Display the Yahoo!Widgets. Start Widgets setting. 2 3 4 ENTER Select your country. ENTER Select Ok, I accept. ENTER Select Ok, I accept. N E T W O R K 86 Tutorial 1 Tutorial 5 1 Choose any of the menu items Tutorial 2 Tutorial 3 Tutorial 4 Red button: Close the widget. Green button: Change the widgets settings. Yellow button: Manage your snippets. Blue button: Size video to fit, or make it fullscreen. Tutorial 6 If you wnat to run this step again, select Replay introduction from the Profile widget at any time. N E T W O R K 87 NETWORK Available Widgets N E T W O R K Setting Widgets
G Flicker:
G Finance:
G Gallery:
G News:
G Weather: When pressing the Yellow button in the dock, you can select the Weather widget. L/R button: Select snippet. U/D Enter button: Enter the selected widget. Blue button: Change viewport. Yellow: Move/Delete the selected widget. Yahoo: Slide out the dock. Menu: Show the Menu. Button Operation Yahoo
(Widgets) Show the DOCK. up/down Move to sub menu highlight. enter menu Show Snippets. Return to MENU OSD back/red red Exit Yahoo mode. Close the widget. green Enter to weather widget setting mode blue Change viewport (aspect ratio) Left/right Move between snippets in the dock Yellow Edit snippets 88 N E T W O R K 89 PICTURE CONTROL PICTURE SIZE (ASPECT RATIO) CONTROL This feature lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV. RGB-PC input source use 4:3 or 16:9 aspect ratio. PICTURE Aspect Ratio : 16:9 Picture Wizard Energy Saving : Off Move Enter Picture Mode
: Standard Backlight Contrast Brightness Sharpness E 70 90 50 70 PICTURE Aspect Ratio : 16:9 Picture Wizard Energy Saving : Off Move Enter Picture Mode
: Standard Backlight Contrast Brightness Sharpness E 80 90 50 60 16:9 Just Scan Set By Program 4:3 Zoom Cinema Zoom 1 1 MENU 2 3 ENTER ENTER 4RETURN MENU Select PICTURE. Select Aspect Ratio. Select the desired picture format. Return to the previous menu. Return to TV viewing. You can also adjust Aspect Ratio in the Q.MENU. Press the RATIO button repeatedly to select the desired picture format. P I C T U R E C O N T R O L 90 16:9 Adjust the picture horizontally, in a linear pro-
portion to fill the entire screen. 4:3 Choose 4:3 when you want to view a picture with an original 4:3 aspect ratio. Just Scan Normally the edges of video signals are cropped 1-2%. Just Scan turns off this cropping and shows the complete video. Notes: If there is noise on the edges of the original signal, it will be visible when Just Scan is activated. Just Scan operates only in DTV/CADTV/Component/HDMI-DTV/DVI-DTV
(720p/1080i/1080p) input source. Zoom Choose Zoom when you want to view the picture without any alteration. However, the top and bottom portions of the picture will be cropped. When adjusting in Q.MENU menu, a. b. or or button: Adjust proportion of Zoom. button: Move the image on the screen. Just Scan Set By Program Selects the proper picture proportion to match the sources image.
(4:3 4:3) Set By Program
(16:9 16:9) Set By Program Cinema Zoom Choose Cinema Zoom when you want to enlarge the picture in correct proportion. Note: When enlarging or reducing the picture, the image may become distorted. or button: Adjust proportion of Cinema Zoom. The adjustment range is 1-16. button: Move the image on the screen. or P I C T U R E C O N T R O L 91 PICTURE CONTROL PICTURE WIZARD This feature lets you adjust the picture quality of the original image. Use this to calibrate the screen quality by adjusting the Black and White Level etc. You can calibrate the screen quality by easily following each step. When you adjust the image to LL o w, Recommended or H i g h, you can see the example of the changes you made. PICTURE Aspect Ratio : 16:9 Picture Wizard Energy Saving : Off Move Enter White Level Set the screen above identical to the Recommended sample below. Picture Mode
: Standard Backlight Contrast Brightness Sharpness E 70 90 50 70 1 MENU Select PICTURE. 5 2 ENTER ENTER Select Picture Wizard. Picture Wizard With Picture Wizard, you can adjust the picture quality of the original image. G Previous Next 3 ENTER Adjust Picture Wizard. Black Level Set the screen above identical to the Recommended sample below. Low Recommended High Brightness 50 E EE Previous Next Low Recommended High Contrast 90 E E Previous Next ENTER Adjust White Level. Color Set the screen above identical to the Recommended sample below. Low Recommended High Color 50 E E Previous Next ENTER Adjust Color. 6 Tint Set the screen above identical to the Recommended sample below. Low Recommended High Tint 0 E R G E Previous Next 4 ENTER Adjust Black Level. 7 ENTER Adjust T i n t. P I C T U R E C O N T R O L 92 Horizontal Sharpness Set the screen above identical to the Recommended sample below. Low Recommended High H Sharpness 50 E E Previous Next 8 ENTER Adjust Horizontal Sharpness. Vertical Sharpness Set the screen above identical to the Recommended sample below. Low Recommended High V Sharpness 50 E E Previous Next ENTER Adjust Vertical Sharpness. 9 For LCD TV Backlight Set the Backlight to your Brightness preference. Dark Recommended Bright Backlight 50 E E Previous Next 10 ENTER Adjust Backlight. Complete Select (an) input(s) to apply the settings. DTV TV AV1 AV2 Component1 Component2 RGB-PC HDMI1 HDMI2 HDMI3 HDMI4 Warning: The picture quality may vary according to the different types of signal and inputs. Previous E E Move MARK Mark Confirm MARK FAV Select input source to apply the settings. ENTER Save. i The current adjustment value is saved to Expert1. Close ENTER Finish the Picture Wizard. 11 12 13 If you stop the setting before the final step, the changes will not be saved to the TV. Once the Picture Wizard sets the pic-
ture quality, Energy Saving is changed to O f f automatically. P I C T U R E C O N T R O L 93 PICTURE CONTROL PRESET PICTURE SETTINGS (PICTURE MODE) There are factory presets for picture settings available in the user menus. You can use a preset, change each setting manually, or use the Intelligent Sensor. PICTURE Aspect Ratio : 16:9 Picture Wizard Energy Saving : Off Move Enter Picture Mode
: Standard Backlight Contrast Brightness Sharpness E 70 90 50 70 1 MENU Select PICTURE. ENTER Select Picture Mode. P I C T U R E C O N T R O L 2 3 ENTER 4RETURN MENU Plasma TV: Select Vivid, Standard, Cinema, Sport, or Game. LCD TV: Select Intelligent Sensor, Vivid, Standard, Natural, Cinema, Sport, or Game. Return to the previous menu. Return to TV viewing. PICTURE Aspect Ratio : 16:9 Picture Wizard Energy Saving : Off Picture Mode
: Standard Backlight Contrast Brightness Sharpness E Move Enter Intelligent Sensor Vivid 70 Standard 90 Natural 50 Cinema 70 Sport Game Expert1 Expert2 LCD TV Vivid Standard Cinema Sport Game Expert1 Expert2 Plasma TV Vivid, Standard, Natural, Cinema, Sport, and Ga m e Settings are preset for the optimum picture quality at the factory. Vivid: This is the mode to maximize the effect of the video in the retail store. Strengthen the contrast, brightness, color and sharpness for vivid picture. Standard: This is the mode to realize optimum viewing condition for the gen-
eral user. Natural: This is the mode to display the most natural screen status. Cinema: This mode optimizes video for watching movies. S p o r t: This is the video mode to emphasize dynamic video and primary color (e.g, white, uniform, grass, sky blue etc.) by realizing the optimal screen for sports. Ga m e: This is the mode to realize fast response speed in a fast gaming screen. Expert: This is the mode to adjust the video in detail for video quality expert and general user. You can also adjust Picture Mode in the Q.MENU. When selecting Intelligent Sensor, Energy Saving is changed to Auto automatically. When selecting Intelligent Sensor, it is changed contrast, brightness, sharpness, color and tint auto-
matically. Intelligent Sensor: The most suitable picture is automatically adjusted according to the surrounding conditions. Cinema: This is cinema quality mode to provide you the experience of watching a movie at home. The user will be able enjoy the best level of satisfactory screen quality in any movie without any sepa-
rate adjustments. Cinema expresses the optimal screen quality when it is darkest. 94 When selecting Cinema, Aspect ratio changes to Just scan. MANUAL PICTURE ADJUSTMENT - USER MODE Adjust the picture appearance to suit your preference and viewing situations. This feature is disabled in Picture Mode-
Cinema (For Plamsa TV). PICTURE Move Enter Aspect Ratio Picture Wizard
: 16:9 Energy Saving : Off Picture Mode
: Standard Backlight Contrast Brightness Sharpness E 70 90 50 70 Select PICTURE. Select Picture Mode. Select Vivid, Standard, Natural, Cinema, Sport, or Game. Select Backlight (For LCD TV), Contrast, Brightness, Sharpness, Color, or T i n t. Make appropriate adjustments. Return to the previous menu. Return to TV viewing. 1 MENU 2 3 4 5 ENTER ENTER ENTER ENTER 6RETURN MENU Backlight E 70 E E E Enter When adjusting Energy Saving, Backlight function is disabled. Backlight (For LCD TV): This function adjusts the brightness of LCD panel, to control the brightness of the screen. Adjusting the backlight is recommended when setting the brightness of the set. When decreasing the backlight, the brightness of the black becomes darker without any loss in video signal and the power consumption is reduced. Contrast: Increase or decrease the gra-
dient of the video signal. You may use Contrast when the bright part of picture is saturated. Brightness: Adjusts the base level of the signal in the picture. You may use Brightness when the dark part of the pic-
ture is saturated. Sharpness: Adjusts the level of crisp-
ness in the edges between the light and dark areas of the picture. The lower the level, the softer the image. Color: Adjusts intensity of all colors. T i n t: Adjusts the balance between red and green levels. P I C T U R E C O N T R O L 95 PICTURE CONTROL PICTURE IMPROVEMENT TECHNOLOGY You can calibrate the screen for each Picture Mode or set the video value according to the special video screen. You can set the video seeing differently for each input. To reset to the factory default after making adjustments to each input source, execute the Picture Reset function for each Picture Mode. PICTURE Move Enter PICTURE E 50 50 50 50 0 Contrast Brightness Sharpness Color Tint Advanced Control Picture Reset R G Move Enter E Color Temperature Dynamic Contrast Contrast 50 Brightness 50 Sharpness 50 Dynamic Color 50 Color Tint 0 Noise Reduction Advanced Control Gamma Picture Reset Black Level R Screen (RGB-PC) Screen (RGB-PC) Eye Care Real Cinema TruMotion 120Hz Off Off G Off Medium Low Off Off Low F Medium G Color Temperature F Medium G Dynamic Contrast Dynamic Color Noise Reduction Gamma Black Level Film Mode Off Off Off Medium Low Off E Close Plasma TV E Close LCD TV 1 MENU ENTER ENTER 2 3 4 5RETURN MENU Select PICTURE. Select Advanced Control. Select your desired options. Make appropriate adjustments. Return to the previous menu. Return to TV viewing. P I C T U R E C O N T R O L 96 EXPERT PICTURE CONTROL By segmenting categories, Expert1 and Expert2 provide more categories which users can set as they see fit, offering the optimal picture quality for users. This may also be used be a professional to help optimize the TV performance in the environment the TV is in. Move Enter PICTURE Move Enter E Dynamic Contrast Brightness 50 H Sharpness 50 V Sharpness 50 Noise Reduction 50 Color Tint 0 Black Level Expert Control Picture Reset Real Cinema Gamma R Screen (RGB-PC) TruMotion 120Hz Color Standard F Off G Dynamic Contrast F Off G Low Medium G Low Off Low HD Noise Reduction Gamma Black Level Film Mode Color Standard Low Medium Low Off HD Color Gamut Standard PICTURE Aspect Ratio Picture Wizard
: 16:9 Energy Saving: Off Picture Mode
: Expert1 70 Backlight Intelligent Sensor 90 Contrast Vivid 50 Brightness Standard H Sharpness 50 Natural Cinema Sport Game E Expert1 Expert2 1 MENU Select PICTURE. 2 3 4 5 6 ENTER ENTER ENTER Select Picture Mode. Select Expert1 or Expert2. Select Expert Control. ENTER Select your desired menu option. Make appropriate adjustments. 7RETURN MENU Return to the previous menu. Return to TV viewing. Color Gamut Standard Edge Enhancer Edge Enhancer High xvYCC High Auto E Close LCD TV E Close Plasma TV P I C T U R E C O N T R O L 97 PICTURE CONTROL Color Temperature Set to warm to enhance hotter colors such as red, or set to cool to make picture bluish. Dynamic Contrast Adjusts the contrast to keep it at the best level according to the brightness of the screen. The picture is improved by making bright parts brighter and dark parts darker. Dynamic Color Adjusts screen colors so that they look livelier, richer and clearer. This feature enhances hue, saturation and luminance so that red, blue, green and white look more vivid. Noise Reduction Reduces screen noise without compromising video quality. Gamma Black Level Eye Care
(For LCD TV) Real Cinema or Film Mode Low : Make dark and middle gray level area of the picture brighter. Medium: Express original picture levels. High: Make dark and middle gray level area of the picture darker. You can adjust brightness of dark area and middle gray level area of the picture. Low: The reflection of the screen gets darker. High: The reflection of the screen gets brighter. Auto: Realizing the black level of the screen and set it to High or Low automatically. Set black level of the screen to proper level. This function enables to select 'Low' or 'High' in the following mode: AV (NTSC-M), HDMI or Component. Otherwise, 'Black level' is set to 'Auto'. Adjust the brightness of the screen to prevent the screen from being too bright. Dims extremely bright pictures. This feature is disabled in Picture Mode-Vivid, C i n e m a, I n t e l l i g e n t Sensor(For LCD TV). Makes video clips recorded in film look more natural by eliminating judder effect. DVD and Blu-ray movies are filmed at 24 frames per second. With LG Real Cinema, every frame is consistently processed 5 times in 1/24 of a second producing 120 fps with TruMotion or 2 times in 1/24 of a second producing 48 fps without TruMotion, thus totally eliminating the judder effect. High: Provides smoother picture movement. Low: Provides smooth picture movement. Use this setting for standard use. Off: Use this setting when "High" and "Low" setting result in noise. TruMotion120Hz provides even better quality for movies than 3:2 Pull-
Down conversions. TruMotion 120Hz
(For LCD TV) TruMotion can reduce the perception of blur on fast moving scenes by displaying 120 images per second. It is used for the best picture quality without any motion blur or judder when you enter a quick image or Film Source. TruMotion120Hz works with all inputs except PC mode. If you enable "TruMotion 120Hz", noise may appear on the screen. If this occurs, set "TruMotion 120Hz" to "Off". P I C T U R E C O N T R O L 98 Color Gamut Standard: Displays standard color area. Wide: Mode to use and set the rich color area of the display. Maximize the utilization of color to increase color quality. Edge Enhancer Show clearer and distinctive yet natural corners of the video. Color Standard Color Filter Convert the color of a different video to HD color. This is the function to filter the specific colors of the video. You can use the RGB filter to set color saturation and hue accurately. xvYCC This is the function to express richer color. This feature represents rich color as much as conventional video signal. This function is enabled in "Picture mode - Cinema, Expert" when xvYCC sig-
nal is inputted through HDMI. Expert Pattern This is the pattern necessary for expert adjustment. This function is enabled in "Picture Mode - Expert" when you watch DTV. This is the function to adjust the overall color of the screen to the feeling you want. a. Method : 2 Points
- Pattern: Inner, Outer
- Red/Green/Blue Contrast, Red/Green/Blue Brightness:
The adjustment range is -50 - +50. LCD TV b. Method : 10 Point IRE
- Pattern: Inner, Outer
- IRE (Institute of Radio Engineers) is the unit to display the size of the video signal and can be set among 10, 20, 30 - 100. You can adjust Red, Green or Blue accord-
ing to each setting.
- Luminance: This function displays calculated luminance value for 2.2 gamma. You can input luminance value you want at 100 IRE, than the target luminance value for 2.2 gamma is displayed at every 10 steps from 10 IRE to 90 IRE.
- Red/Green/Blue: The adjustment range is -50 - +50. Plasma TV b. Method : 20 Point IRE
- IRE (Institute of Radio Engineers) is the unit to display the size of the video signal and can be set among 5, 10, 15 - 100 Plasma TV. You can adjust Red, Green or Blue according to each setting.
- Red/Green/Blue: The adjustment range is -50 - +50. As the tool used by the experts to make adjustments by using the test patterns, this does not affect other colors but can be used to selectively adjust the 6 color areas
(Red/Green/Blue/Cyan/Mgt/Yellow). Color difference may not be distinctive even when you make the adjustments for the general video. Adjusts Red/Green/Blue/Yellow/Cyan, Magenta.
- Red/Green/Blue/Yellow/Cyan, Magenta Color: The adjustment range is -30 - +30.
- Red/Green/Blue/Yellow/Cyan, Magenta Tint: The adjustment range is -30 - +30.
- This feature is disable in RGB-PC and HDMI-PC mode. White Balance Color Management System OPC
*This feature is not available for all models. As the technology to reduce the power consumption while keeping the same bright-
ness, this has the effect of reducing power consumption, improvement in contrast. P I C T U R E C O N T R O L 99 PICTURE CONTROL ENERGY SAVING It reduces the TVs power consumption by lowering the backlight level. The default factory setting complies with the Energy Star requirements and is adjusted to the comfortable level to be viewed at home. You can increase the brightness of your screen by adjusting the Energy Saving level or by setting the Picture M o d e. PICTURE Aspect Ratio Picture Wizard
: 16:9 Energy Saving : Off Move Enter Picture Mode
: Standard Backlight Contrast Brightness Sharpness E 70 90 50 70 PICTURE Aspect Ratio Picture Wizard
: 16:9 Energy Saving : Off Move Enter Picture Mode
: Standard Backlight Contrast Brightness Sharpness E 70 Auto 90 Off 50 Minimum 70 Medium Maximum Screen off LCD TV F High G Intelligent Sensor Off Minimum Medium Maximum Plasma TV Select PICTURE. Select Energy Saving. Plasma TV: Select Intelligent Sensor, O f f, Minimum, Medium, or Maximum.
*When selecting IIntelligent Sensor Select L o w, Middle, or H i g h. LCD TV: Select Auto, O f f, Minimum, Medium, Maximum, or Screen Off. When selecting Screen off, TV turned off after 3 seconds. If you adjust Energy Saving-Auto
(For LCD TV), M i n i m u m, M e d i u m, Maximum, Backlight feature will not work. When selecting A u t o, B a c k l i g h t is through automatically Intelligent sensor according to the surrounding conditions (For LCD TV). adjusted Press the ENERGY SAVING button repeatedly to select the appropriate Energy Saving setup. P I C T U R E C O N T R O L 1 MENU 2 3 ENTER ENTER 4RETURN MENU Return to the previous menu. Return to TV viewing. 100 PICTURE RESET Settings of the selected picture modes return to the default factory settings. PICTURE Move Enter E PICTURE Move Enter E
Contrast 50 Brightness 50 Sharpness 50 Color 50 0 Tint Yes Advanced Control Picture Reset All picture settings will be resetted. Continue?
R G No 50 50 50 50 0 Contrast Brightness Sharpness Color Tint Advanced Control Picture Reset ii R G Resetting video configuration... Screen (RGB-PC) Screen (RGB-PC) 1 MENU 2 3 4 ENTER ENTER ENTER 5 MENU Select PICTURE. Select Picture Reset. Select Y e s. Initialize the adjusted value. Return to TV viewing. P I C T U R E C O N T R O L 101 PICTURE CONTROL THX MEDIA DIRECTOR - For Plasma TV
OPTION Move Enter OPTION Move Enter
: English
: English Menu Language Audio Language Input Label THX Media Director : Off
: On SIMPLINK Key Lock
: Off Simple Manual Caption
: Off
: English
: English Menu Language Audio Language Input Label THX Media Director : Off
: On SIMPLINK Key Lock
: Off Simple Manual Caption
: Off Off On E E 1 MENU 2 3 ENTER ENTER 4RETURN MENU Select OPTION. Select THX Media Director. Select O n or O f f. Return to the previous menu. Return to TV viewing. P I C T U R E C O N T R O L 102 IMAGE STICKING MINIMIZATION (ISM) METHOD - For Plasma TV A frozen still picture displayed on the screen for prolonged periods can result in a ghost image. You can use Orbiter to help prevent image sticking. The other two functions are for removing a ghost image. OPTION Move Enter OPTION Move Enter E SIMPLINK Key Lock Simple Manual Caption Set ID ISM Method Demo Mode Initial Setting
: On
: Off
: Off
: 1
: Off
: Home Use Select OPTION. Select ISM Method. Select Normal, Orbiter, Color Wash, or White Wash. Return to the previous menu. Return to TV viewing. 1 MENU 2 3 ENTER ENTER 4RETURN MENU E SIMPLINK Key Lock Simple Manual Caption Set ID ISM Method Demo Mode Initial Setting
: On
: Off
: Off
: 1 Standby Light
: Off
: Home Use Power Light F On G On Close Normal: If image sticking is never a problem, ISM is not necessary - set to Normal. O r b i t e r: Orbiter may help prevent ghost images. However, it is best not to allow any fixed image to remain on the screen. To avoid a ghost image on the screen, the image will move every 2 min-
utes. Color Wash: The color block with the screen moved a little and the white pat-
tern are alternately displayed. It is diffi-
cult to see the after image on all colors. Once it has been corrected it will not be visible in any color. W h i t e W a s h: White Wash removes ghost images from the screen. Use spar-
ingly. Watch the TV normally for a while before using this feature to see if the ghost image disappears on its own.
NOTE G An excessive ghosted image may be impossible to clear entirely with White Wash. To return to nor-
mal viewing, press the any button. P I C T U R E C O N T R O L 103 PICTURE CONTROL POWER INDICATOR - For LCD TV Adjust the power/standby indicator light of TV front. OPTION Move Enter OPTION Move Enter E SIMPLINK Key Lock Simple Manual Caption Set ID Power Indicator Demo Mode Initial Setting
: On
: Off
: Off
: 1
: Off
: Home Use E SIMPLINK Key Lock Simple Manual Caption Set ID Power Indicator Demo Mode Initial Setting
: On
: Off
: Off
: 1 Standby Light
: Off
: Home Use Power Light F On G On Close Select OPTION. Select Power Indicator. Select Standby Light or Power Light. Standby Light: Determines whether to set the indicator light on the front of the TV to O n or O f f in standby mode. Power Light: Determines whether to set the indicator light on the front of the TV to O n or O f f when the power turns on. Select your desired options. Return to the previous menu. Return to TV viewing. 1 MENU ENTER ENTER 2 3 4 5RETURN MENU P I C T U R E C O N T R O L 104 DEMO MODE Displays a slide show to explain the various feature of this TV. OPTION Move Enter OPTION Move Enter E SIMPLINK Key Lock Simple Manual Caption Set ID Power Indicator Demo Mode Initial Setting
: On
: Off
: Off
: 1
: Off
: Store Demo E SIMPLINK Key Lock Simple Manual Caption Set ID Power Indicator Demo Mode Initial Setting
: On
: Off
: Off
: 1 Off
: On On
: Store Demo LCD TV Off On (LED On) On (LED Off) Plasma TV 1 MENU 2 3 ENTER ENTER 4 MENU Select OPTION. Select Demo Mode. This feature is disabled in I n i t i a l Setting-Home Use. LED On: ?
LED Off: ?
Plasma TV: Select LED On or L E D O f f to show the various feature of the TV. LCD TV: Select O n to show the vari-
ous feature of the TV. Return to TV viewing. After a while, Demo Mode starts. If you want to stop the demo, press any button
(Except VOL +, - and MUTE button). P I C T U R E C O N T R O L 105 SOUND & LANGUAGE CONTROL AUTO VOLUME LEVELER (AUTO VOLUME) Auto Volume makes sure that the volume level remains consistent whether you are watching a commercial or a regular TV program. Because each broadcasting station has its own signal conditions, volume adjustment may be needed every time the channel is changed. This feature allows users to enjoy stable volume levels by making automatic adjustments for each program. AUDIO Auto Volume Clear Voice II Balance Sound Mode
: Off
: Off Level Move Enter 3 0
L
R
: Standard SRS TruSurround XT: Off Treble Bass 50 50 E AUDIO Auto Volume Clear Voice II Balance Sound Mode
: On
: Off Level Move Enter Off On 3 0
L
R
: Standard SRS TruSurround XT: Off Treble Bass 50 50 E 1 MENU Select AUDIO. ENTER Select Auto Volume. 2 3 ENTER Select O n or O f f. 4RETURN MENU Return to the previous menu. Return to TV viewing. S O U N D
L A N G U A G E C O N T R O L 106 CLEAR VOICE II By differentiating the human sound range from others, it improves the sound quality of voices. AUDIO Auto Volume Clear Voice II Balance Sound Mode
: Off
: Off Level Move Enter 3 0
L
R
: Standard SRS TruSurround XT: Off Treble Bass 50 50 E AUDIO Auto Volume Clear Voice II Balance Sound Mode
: Off
: On Level Move Enter Off
On L 3 0
R
: Standard SRS TruSurround XT: Off Treble Bass 50 50 E 1 MENU Select AUDIO. ENTER Select Clear Voice II. 2 3 ENTER Select O n or O f f. Adjustment for Clear Voice Level With selecting O n 4 5 ENTER ENTER 6RETURN MENU Select Level. Make appropriate adjustments. Return to the previous menu. Return to TV viewing. S O U N D
L A N G U A G E C O N T R O L 107 SOUND & LANGUAGE CONTROL PRESET SOUND SETTINGS (SOUND MODE) Sound Mode lets you enjoy the best sound without any special adjustment as the TV sets the appropriate sound options based on the program content. AUDIO Auto Volume Clear Voice II Balance Sound Mode
: Off
: Off Level Move Enter 3 0
L
R
: Standard SRS TruSurround XT: Off Treble Bass 50 50 E AUDIO Auto Volume Clear Voice II Balance Sound Mode
: Off
: Off Level Move Enter 3 0
L
R
: Standard Standard SRS TruSurround XT: Off Music Treble Cinema Bass Sport Game 50 50 E 1 MENU Select AUDIO. ENTER Select Sound Mode. 2 3 ENTER 4RETURN MENU Select Standard, Music, Cinema, Sport, or Game. Return to the previous menu. Return to TV viewing. Standard, Music, Cinema, Sport, and G a m e are preset for optimum sound quality at the factory. You can also adjust Sound Mode in the Q.MENU. S t a n d a r d: Offers standard-quality sound. Music: Optimizes sound for listening to music. Cinema: Optimizes sound for watching movies. Sport: Optimizes sound for watching sports events. G a m e: Optimizes sound for playing games. S O U N D
L A N G U A G E C O N T R O L 108 SOUND SETTING ADJUSTMENT - USER MODE Adjust the sound to suit your taste and room situations. AUDIO Auto Volume Clear Voice II Balance Sound Mode
: Off
: Off Level Move Enter 3 0
L
R
: Standard SRS TruSurround XT: Off Treble Bass 50 50 E 1 MENU Select AUDIO. 2 3 4 ENTER Select Sound Mode. ENTER Select Standard, Music, Cinema, Sport, or Game. ENTER Select Treble or B as s. SRS TRUSURROUND XT Select this option to sound realistic. 1 MENU Select AUDIO. 2 3 ENTER ENTER 4RETURN MENU Select SRS TruSurround XT. Select O n or O f f. Return to the previous menu. Return to TV viewing. AUDIO Auto Volume Clear Voice II Balance Sound Mode 5 ENTER 6RETURN MENU
: Off
: Off Level Move Enter 3 0
L
R
: Standard SRS TruSurround XT: Off Treble Bass 50 50 Treble Bass E SRS TruSurround XT Off E E 50 50 Close Make appropriate adjustments. Return to the previous menu. Return to TV viewing. If sound quality or volume is not at the level you want, it is recommended to use a separate home theater system or amp to cope with dif-
ferent user environments. If you select Clear Voice II-On, S R S TruSurround XT feature will not work. SRS TruSurround XT: TruSurround XT is a patented SRS technology that solves the prob-
lem of playing 5.1 multichannel content over two speakers. S O U N D
L A N G U A G E C O N T R O L 109 SOUND & LANGUAGE CONTROL BALANCE Adjust the left/right sound of speaker to suit your taste and room situations. Move Enter
: Off
: Off Level 3 0
L
: Standard SRS TruSurround XT: Off Treble Bass 50 50 E
R Balance 0 E L R E Close AUDIO Auto Volume Clear Voice II Balance Sound Mode
: Off
: Off Level Move Enter 3 0
L
R
: Standard SRS TruSurround XT: Off Treble Bass 50 50 E AUDIO Auto Volume Clear Voice II Balance Sound Mode S O U N D
L A N G U A G E C O N T R O L 1 MENU 2 3 ENTER ENTER 4RETURN MENU Select AUDIO. Select Balance. Make appropriate adjustments. Return to the previous menu. Return to TV viewing. 110 TV SPEAKERS ON/OFF SETUP Turn the TV speakers off if using external audio equipment. In A V, Component, R G B and HDMI with HDMI to DVI cable, the TV speaker can be operational even when there is no video signal. If you wish to use an external Hi-Fi system or a SRS System, turn off the TVs internal speakers. E Level Move Enter 3 0
L
R
: Standard SRS TruSurround XT: Off Treble Bass Reset
: On 50 50 Off On AUDIO Balance Sound Mode TV Speaker E Level Move Enter 3 0
L
R
: Standard SRS TruSurround XT: Off Treble Bass Reset
: On 50 50 AUDIO Balance Sound Mode TV Speaker 1 MENU Select AUDIO. ENTER Select TV Speaker. 2 3 ENTER Select O n or O f f. 4RETURN MENU Return to the previous menu. Return to TV viewing. S O U N D
L A N G U A G E C O N T R O L 111 SOUND & LANGUAGE CONTROL AUDIO RESET Settings of the selected Sound Mode return to the default factory settings. AUDIO Balance Sound Mode TV Speaker E Level Move Enter 3 0
L
R
: Standard SRS TruSurround XT: Off Treble Bass Reset
: On 50 50 AUDIO Balance Sound Mode TV Speaker E Level Move Enter 3 0
L
R i
: Standard SRS TruSurround XT: Off Treble Resetting audio configuration... Bass Reset
: On 50 50 1 MENU Select AUDIO. ENTER Select Reset. 2 3 ENTER Initialize the adjusted value. 4 MENU Return to TV viewing. S O U N D
L A N G U A G E C O N T R O L 112 STEREO/SAP BROADCAST SETUP For Analog only: This TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accom-
panies the stereo program if the station transmits an additional sound signal. Mono sound is automatically used if the broadcast is only in Mono. F Multi Audio G English A Analog TV Digital TV 1Q. MENU 2 3 Q. MENU Select S A P. Select Mono, Stereo, or S A P. Return to TV viewing. 1Q. MENU 2 3 Q. MENU Select Multi Audio. Select other languages. Return to TV viewing. S O U N D
L A N G U A G E C O N T R O L 113 SOUND & LANGUAGE CONTROL AUDIO LANGUAGE Other languages may be available if a digital signal is provided by the broadcasting station. This feature operates only in DTV/CADTV mode. OPTION Move Enter OPTION Move Enter
: English
: English Menu Language Audio Language Input Label THX Media Director : Off
: On SIMPLINK Key Lock
: Off Simple Manual Caption
: Off English Spanish French
: English
: English Menu Language Audio Language Input Label THX Media Director : Off
: On SIMPLINK Key Lock
: Off Simple Manual Caption
: Off E E 1 MENU 2 3 ENTER ENTER 4RETURN MENU Select OPTION. Select Audio Language. Select your desired language. Return to the previous menu. Return to TV viewing. S O U N D
L A N G U A G E C O N T R O L 114 ON-SCREEN MENUS LANGUAGE SELECTION The menus can be shown on the screen in the selected language. OPTION Move Enter OPTION Move Enter
: English
: English Menu Language Audio Language Input Label THX Media Director : Off
: On SIMPLINK Key Lock
: Off Simple Manual Caption
: Off
: English
: English English Espaol Franais Menu Language Audio Language Input Label THX Media Director : Off
: On SIMPLINK Key Lock
: Off Simple Manual Caption
: Off E E 1 MENU Select OPTION. 2 3 ENTER 4RETURN MENU ENTER Select Menu Language. Select your desired language. From this point on, the on-screen menus will be shown in the selected language. Return to the previous menu. Return to TV viewing. S O U N D
L A N G U A G E C O N T R O L 115 SOUND & LANGUAGE CONTROL CAPTION MODE Analog Broadcasting System Captions Captions are provided to help people with hearing loss watch TV. Select a caption mode for displaying cap-
tioning information if provided on a program. Analog caption displays information at any position on the screen and is usually the program's dialog. Caption/Text, if provided by the broadcaster, would be available for both digital and analog channels on the Antenna/Cable. This TV is programmed to memorize the caption/text mode which was last set when you turned the power off. This function is only available when Caption Mode is set O n. OPTION Move Enter OPTION Move Enter
: English
: English Menu Language Audio Language Input Label THX Media Director : Off SIMPLINK
: On Key Lock
: Off Simple Manual Caption
: Off
: English
: English Menu Language Audio Language Input Label THX Media Director : Off SIMPLINK
: On Key Lock
: Off Simple Manual Caption
: CC1 E E F Mode On G CC1 Digital Option Close Select OPTION. When selecting O f f, Sub-menus for Analog, DTV, and Digital Option become disabled. Select Caption. CAPTION The term for the words that scroll across the bottom of the TV screen;
usually the audio portion of the pro-
gram provided for the hearing impaired. T E X T The term for the words that appear in a large black frame and almost cover the entire screen; usually messages provid-
ed by the broadcaster. Select O n. Select C C 1-4 or Text1-4. Return to the previous menu. Return to TV viewing. 1 MENU ENTER ENTER 2 3 4 5RETURN MENU S O U N D
L A N G U A G E C O N T R O L 116 Digital Broadcasting System Captions Choose the language you want the DTV/CADTV Captions to appear in. Other Languages can be chosen for digital sources only if they are included on the program. This function in only available when Caption Mode is set On. OPTION Move Enter OPTION Move Enter
: English
: English Menu Language Audio Language Input Label THX Media Director : Off SIMPLINK
: On Key Lock
: Off Simple Manual Caption
: Off
: English
: English Menu Language Audio Language Input Label THX Media Director : Off SIMPLINK
: On Key Lock
: Off F Simple Manual Caption Mode
: CC1 On G CC1 E E Digital Option Close 1 MENU ENTER ENTER 2 3 4 5RETURN MENU Select OPTION. Select Caption. Select O n. Select C C 1-4, Text1-4, or Service1 - 6. Return to the previous menu. Return to TV viewing. S O U N D
L A N G U A G E C O N T R O L 117 SOUND & LANGUAGE CONTROL Caption Option Customize the DTV/CADTV captions that appear on your screen. This function in only available when Caption Mode is set On. OPTION Move Enter OPTION Move Enter
: English
: English Menu Language Audio Language Input Label THX Media Director : Off
: On SIMPLINK Key Lock
: Off Simple Manual Caption
: Off
: English
: English Menu Language Audio Language Input Label THX Media Director : Off
: On SIMPLINK Key Lock
: Off Simple Manual Caption Mode
: CC1 On CC1 Digital Option Close E E 1 MENU Select OPTION. 2 3 4 5 6 ENTER ENTER Select Caption Select O n. Select Digital Option. ENTER Select Custom. Customize the S i z e, Font, etc., to your preference. A preview icon is provided at the bottom of the screen, use it to see the caption language. 7RETURN MENU Return to the previous menu. Return to TV viewing. S O U N D
L A N G U A G E C O N T R O L 118 F Size Font Text Color Text Opacity Bg Color Bg Opacity Edge Type Edge Color Custom G A Standard Font 1 White Solid Black Solid None Black Close S i z e: Set the word size. Font: Select a typeface for the text. Text Color: Choose a color for the text. Text Opacity: Specify the opacity for the text color. Bg (Background) Color: Select a background color. Bg (Background) Opacity: Select the opacity for the background color. Edge Type: Select an edge type. Edge Color: Select a color for the edges. TIME SETTING CLOCK SETTING Auto Clock Setup The time is set automatically from a digital channel signal. The digital channel signal includes information for the current time provided by the broadcasting station. Set the clock manually if the current time is set incorrectly by the auto clock function. TIME Clock Off Time On Time Sleep Timer Move Enter
: Off
: Off
: Off TIME Clock Off Time On Time Sleep Timer Move Enter F Auto
: Off Month
: Off Date
: Off Year Hour Minute G 02 21 2009 10 AM 10 Time Zone Eastern Daylight Saving Auto Close 1 MENU Select T I M E. ENTER ENTER 2 3 4 5 6RETURN MENU Select Clock. Select Auto. Select your viewing area time zone. U.S.A: E a s t e r n, C e n t r a l, M o u n t a i n, Pacific, Alaska, or Hawaii. Canada: Eastern, Central, Mountain, Pacific, New F.land, or Atlantic. Select Auto, O f f, or O n (depending on whether or not your viewing area observes Daylight Saving time). Return to the previous menu. Return to TV viewing. I T M E S E T T I N G 119 TIME SETTING Manual Clock Setup If the current time setting is wrong, reset the clock manually. If this TV is unplugged once or turn off with the AC power control switch on the TV, reset the Clock function. TIME Clock Off Time On Time Sleep Timer Move Enter
: Off
: Off
: Off TIME Clock Off Time On Time Sleep Timer Move Enter F Manual G
: Off
: Off
: Off Month Date Year Hour Minute 02 21 2009 10 AM 10 Time Zone Eastern Daylight Saving Auto Close 1 MENU Select T I M E. ENTER ENTER 2 3 4 5 6RETURN MENU Select Clock. Select Manual. Select the Year, Month, Date, Hour, or Minutes option. Set the Year, Month, Date, Hour, or Minutes option. Return to the previous menu. Return to TV viewing. I T M E S E T T I N G 120 AUTO ON/OFF TIME SETTING This function operates only if the current time has been set. The Off Time function overrides the On Time function if they are both set to the same time. The TV must be in standby mode for the On Time to work. If you do not press any button within 2 hours after the TV turns on with the On Time function, the TV will automatically revert to standby mode. TIME Clock Off Time On Time Sleep Timer Move Enter
: Off
: Off
: Off TIME Clock Off Time On Time Sleep Timer Move Enter Feb. 21, 2009 10:10 AM
: Off
: 6:30 AM (Once)
: Off Repeat Hour Minute Input Channel Volume F Once G 6 AM 30 TV TV 2-0 30 Close 1 MENU Select T I M E. To cancel On/Off Time function, select O f f. Only for On Time function ENTER ENTER 2 3 4 5 6RETURN MENU Select Off Time or On Time. Select Repeat. Select O f f, O n c e, Daily, M o n .~F r i ., M o n .~S a t ., S a t .~ S u n ., or S u n .. Select and set Hour or Minute. Return to the previous menu. Return to TV viewing. 1 2 3 4 ENTER Select Input. Select the desired input source. When Selecting T V:
set the channel at turn-on. Adjust to sound level at turn-on. I T M E S E T T I N G 121 TIME SETTING SLEEP TIMER SETTING The Sleep Timer turns the TV off at the preset time. Note that this setting is cleared when the TV is turned off. TIME Clock Off Time On Time Sleep Timer Move Enter
: Off
: Off
: Off TIME Clock Off Time On Time Sleep Timer Move Enter
: Off
: Off
: Off Off 10 min. 20 min. 30 min. 60 min. 90 min. 120 min. 180 min. 240 min. 1 MENU 2 3 ENTER ENTER 4RETURN MENU I T M E S E T T I N G Select T I M E. Select Sleep Timer. Make appropriate adjustments. Return to the previous menu. Return to TV viewing. To cancel the Sleep Timer, select O f f. You can also adjust Sleep Timer in the Q.MENU. Press the SLEEP button repeatedly to select the number of minutes. 122 PARENTAL CONTROL / RATINGS Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broad-
casting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by choosing the type of the program and the categories. It is also possible to block all program viewing for a time period. To use this function, the following must be done :
1. Set ratings and categories to be blocked. 2. Specify a password 3. Enable the lock V-Chip rating and categories Rating guidelines are provided by broadcasting stations. Most television programs and television movies can be blocked by TV Rating and/or Individual Categories. Movies that have been shown at the theaters or direct-to-
video movies use the Movie Rating System (MPAA) only. Ratings for Television programs including made-for-TV movies:
TV-G (General audience) TV-PG (Parental guidance suggested) TV-14 (Parents strongly cautioned) TV-MA (Mature audience only) TV-Y TV-Y7 (Children 7 years older)
(All children) SET PASSWORD & LOCK SYSTEM Setting up Your Password Set up blocking schemes to block specific channels, ratings, and external viewing sources. A password is required to gain access to this menu. For USA For Canada LOCK Move Enter LOCK Move Enter Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block Lock System : Off Set Password Block Channel TV Rating-English TV Rating-French Downloadable Rating Input Block Enter Password
Close 1 MENU 2 1 4 GHI 7 PQRS 3 DEF 6 MNO 9 WXYZ 2 ABC 5 JKL 8 TUV 0 ENTER Select L O C K. Input the password. Enter the password as requested. The TV is set up with the initial pass-
word 0-0-0-0. P A R E N T A L C O N T R O L
R A T I N G 123 PARENTAL CONTROL / RATINGS Lock System Enables or disables the blocking scheme you set up previously. LOCK Move Enter LOCK Move Enter Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block Off On Lock System : On Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block ENTER Select L O C K. When you select O n, the Lock System is enable. Input the password. Select Lock System. 1 MENU 3 DEF 6 MNO 9 WXYZ 2 ABC 5 JKL 8 TUV 0 2 1 4 GHI 7 PQRS 3 4 ENTER Select O n or O f f. 5RETURN MENU Return to the previous menu. Return to TV viewing. P A R E N T A L C O N T R O L
R A T I N G 124 Set Password Change the password by inputting a new password twice. LOCK Move Enter LOCK Move Enter Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block ENTER Select L O C K. Input the password. Select Set Password. 1 4 GHI 7 PQRS 3 DEF 6 MNO 9 WXYZ 2 ABC 5 JKL 8 TUV 0 Choose any 4 digits for your new password. As soon as the 4 digits are entered, re-enter the same 4 digits on the Confirm. Return to the previous menu. Return to TV viewing. 1 MENU 3 DEF 6 MNO 9 WXYZ 2 ABC 5 JKL 8 TUV 0 2 1 4 GHI 7 PQRS 3 4 ENTER 5RETURN MENU New
Confirm *
Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block Close P A R E N T A L C O N T R O L
R A T I N G 125 PARENTAL CONTROL / RATINGS CHANNEL BLOCKING Blocks any channels that you do not want to watch or that you do not want your children to watch. Ch. Change Navigation CH Page Change Previous Block/Unblock If a channel is locked, enter the pass-
word to unlocked it temporarily. LOCK Move Enter Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block 1 MENU 3 DEF 6 MNO 9 WXYZ 2 ABC 5 JKL 8 TUV 0 2 1 4 GHI 7 PQRS 3 ENTER Select L O C K. Input the password. Select Block Channel. ENTER Select a channel to block or unblock. 4 5 Block or unblock a channel. 6RETURN MENU Return to the previous menu. Return to TV viewing. P A R E N T A L C O N T R O L
R A T I N G 126 MOVIE & TV RATING Movie Rating (MPAA) - For USA Blocks movies according to the movie ratings limits specified, so children cannot view certain movies. You can set the ratings limit by blocking out all the movies with the ratings above a specified level. Keep in mind that the movie ratings limit only applies to movies shown on TV, not TV programs, such as soap operas. LOCK Move Enter LOCK Move Enter Blocking off : Permits all programs Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block G PG PG-13 R NC-17 X Blocking Off 1 MENU 3 DEF 6 MNO 9 WXYZ 2 ABC 5 JKL 8 TUV 0 2 1 4 GHI 7 PQRS 3 4 ENTER 5RETURN MENU ENTER Select L O C K. Input the password. Select Movie Rating. Select G, P G, PG-13, R, NC-17, X, or Blocking Off. Return to the previous menu. Return to TV viewing. If M o v i e R a t i n g, T V R a t i n g -
Children or TV Rating-General is locked, enter the password to unlocked it temporarily. G (General audience) PG (Parental guidance suggested) PG-13 (Parents strongly cautioned) R (Restricted) NC-17 (No one 17 and under admitted) X (Adult only) Blocking Off (Permits all programs) G If you set PG-13: G and PG movies will be available, PG-13, R, NC-17 and X will be blocked. P A R E N T A L C O N T R O L
R A T I N G 127 PARENTAL CONTROL / RATINGS TV Rating Children - For USA Prevents children from watching certain children's TV programs, according to the ratings limit set. The children rating does not apply to other TV programs. Unless you block certain TV programs intended for mature audi-
ences in the TV Rating - sub menu, your children can view those programs. LOCK Move Enter LOCK Move Enter Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block Age Fantasy Violence Close Age (applies to TV-Y, TV-Y7) Fantasy Violence (applies to TV-Y7) 1 MENU 3 DEF 6 MNO 9 WXYZ 2 ABC 5 JKL 8 TUV 0 2 1 4 GHI 7 PQRS 3 ENTER Select L O C K. Input the password. Select TV Rating-Children. ENTER Select A g e or Fantasy Violence. 4 5 ENTER Select block options. 6RETURN MENU Return to the previous menu. Return to TV viewing. P A R E N T A L C O N T R O L
R A T I N G 128 TV Rating General - For USA Based on the ratings, blocks certain TV programs that you and your family do not want to view. LOCK Move Enter Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block Age Dialogue Language Sex Violence Close Age (applies to TV-G,TV-PG,TV-14,TV-
MA). Dialogue-sexual dialogue (applies to TV-PG,TV-14). Language-adult language (applies to TV-PG, TV-14, TV-MA). Sex-sexual situations (applies to TV-PG, TV-14, TV-MA). Violence (applies to TV-PG, TV-14, TV-
MA). LOCK Move Enter Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block ENTER Select L O C K. Input the password. Select TV Rating-General. Select A g e, Dialogue, Language, S e x or Violence. Select block options. Return to the previous menu. Return to TV viewing. 1 MENU 2 1 4 GHI 7 PQRS 3 DEF 6 MNO 9 WXYZ 2 ABC 5 JKL 8 TUV 0 3 4 5 ENTER ENTER 6RETURN MENU P A R E N T A L C O N T R O L
R A T I N G 129 PARENTAL CONTROL / RATINGS TV Rating English - For CANADA Selecting Canadian English rating system. LOCK Move Enter LOCK Move Enter Blocking off : Permits all programs Lock System : Off Set Password Block Channel TV Rating-English TV Rating-French Downloadable Rating Input Block Lock System : Off Set Password Block Channel TV Rating-English TV Rating-French Downloadable Rating Input Block E C C8+
G PG 14+
18+
Blocking Off 1 MENU 3 DEF 6 MNO 9 WXYZ 2 ABC 5 JKL 8 TUV 0 2 1 4 GHI 7 PQRS 3 4 ENTER 5RETURN MENU ENTER Select L O C K. Input the password. Select TV Rating-English. Select E, C, C8+, G, P G, 14+, 18+, or Blocking Off. Return to the previous menu. Return to TV viewing. If TV Rating-English or TV Rating-
French is locked, enter the password to unlocked it temporarily. E (Exempt) C (Children) C8+ (Children eight years and older) G (General programming, suitable for all audiences) PG (Parental Guidance) 14+ (Viewers 14 years and older) 18+ (Adult programming) Blocking Off (Permits all programs) P A R E N T A L C O N T R O L
R A T I N G 130 TV Rating French - For CANADA Selecting Canadian French rating system. LOCK Move Enter LOCK Move Enter Blocking off : Permits all programs Lock System : Off Set Password Block Channel TV Rating-English TV Rating-French Downloadable Rating Input Block Lock System : Off Set Password Block Channel TV Rating-English TV Rating-French Downloadable Rating Input Block E G 8ans+
13ans+
16ans+
18ans+
Blocking Off 1 MENU 3 DEF 6 MNO 9 WXYZ 2 ABC 5 JKL 8 TUV 0 2 1 4 GHI 7 PQRS 3 4 ENTER 5RETURN MENU ENTER Select L O C K. Input the password. Select TV Rating-French. Select E, G, 8ans+, 13ans+, 16ans+, 18ans+, or Blocking off. Return to the previous menu. Return to TV viewing. E (Exempt) G (General) 8ans+ (General-Not convenient for lit-
tle children) 13ans+ (Not convenient for children of 13 years and younger) 16ans+ (Not convenient for children of 16 years and younger) 18ans+ (This programs is only for adults) Blocking off (Permits all programs) P A R E N T A L C O N T R O L
R A T I N G 131 PARENTAL CONTROL / RATINGS DOWNLOADABLE RATING This function is available only for digital channels. This function operates only when TV has received Region5 Rating data. LOCK Move Enter LOCK Move Enter Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block E Humor Sport Cruelty Language Sadness Genre Age E Close Based on rating table, your TV's OSD
(On Screen Display) may differ slightly from what is shown in this manual. If a Downloadable rating is locked, enter the password to unlocked it temporarily. Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block 1 MENU 2 1 4 GHI 7 PQRS 3 DEF 6 MNO 9 WXYZ 2 ABC 5 JKL 8 TUV 0 ENTER Select L O C K. Input the password. 3 4 5 Select Downloadable Rating. ENTER Select desired Downloadable Rating option. ENTER Select desired option and block it. 6RETURN MENU Return to the previous menu. Return to TV viewing. P A R E N T A L C O N T R O L
R A T I N G 132 EXTERNAL INPUT BLOCKING Enables you to block an input. LOCK Move Enter Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block LOCK Move Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block AV1 Enter AV2 Component1 Component2 RGB-PC HDMI1 HDMI2 HDMI3 HDMI4 F Off G Off Off Off Off Off Off Off Off Close 1 MENU 3 DEF 6 MNO 9 WXYZ 2 ABC 5 JKL 8 TUV 0 2 1 4 GHI 7 PQRS 3 ENTER Select L O C K. Input the password. Select Input Block. 4 5 ENTER Select input source. Select O n or O f f. 6RETURN MENU Return to the previous menu. Return to TV viewing. P A R E N T A L C O N T R O L
R A T I N G 133 APPENDIX TROUBLESHOOTING The operation does not work normally. The remote control doesnt work Check to see if there is any object between the product and the remote control causing obstruction. Ensure you are pointing the remote control directly at the TV. Ensure that the batteries are installed with correct polarity (+ to +, - to -). Ensure that the correct remote operating mode is set: TV, VCR etc. Install new batteries.
*This feature is not available for all models. Power is suddenly turned off Is the sleep timer set?
Check the power control settings. Power interrupted. TV will be automatically turned off, in case of no signal for 15 minutes. The video does not work. No picture &No sound Check whether the product is turned on. Try another channel. The problem may be with the broadcast. Is the power cord inserted into wall power outlet?
Check your antenna direction and/or location. Test the wall power outlet, plug another products power cord into the outlet where the products power cord was plugged in. Picture appears slowly after switching on This is normal, the image is muted during the product startup process. Please contact your service center, if the picture has not appeared after five minutes. A P P E N D I X No or poor color or poor picture Horizontal/vertical bars or picture shaking Adjust Color in menu option. Keep a sufficient distance between the product and the VCR. Try another channel. The problem may be with the broadcast. Are the video cables installed properly?
Activate any function to restore the brightness of the picture. Check for local interference such as an electrical appliance or power tool. Poor reception on some channels Station or cable product experiencing problems, tune to another station. Station signal is weak, reorient antenna to receive weaker station. Check for sources of possible interference. Lines or streaks in pictures No picture when connecting HDMI 134 Check antenna (Change the direction of the antenna). Check HDMI cable over version 1.3. The HDMI cables dont support HDMI version 1.3, it cause flickers or no screen display. In this case use the latest cables that support HDMI version 1.3. The audio does not work. Picture OK & No sound Press the VOL or VOLUME button. Sound muted? Press MUTE button. Try another channel. The problem may be with the broadcast. Are the audio cables installed properly?
No output from one of the speakers Adjust Balance in menu option. Unusual sound from inside the product A change in ambient humidity or temperature may result in an unusual noise when the product is turned on or off and does not indicate a fault with the product. No sound when connecting HDMI/USB Check HDMI cable over version 1.3. Check USB cable over version 2.0. Use normal MP3 file.
*This feature is not available for all models. There is a problem in PC mode. (Only PC mode applied) The signal is out of range Adjust resolution, horizontal frequency, or vertical frequency. Check the input source. Vertical bar or stripe on background &
Horizontal Noise &
Incorrect position Work the Auto configure or adjust clock, phase, or H/V position. (Option) Screen color is unstable or single color Check the signal cable. Reinstall the PC video card. A P P E N D I X 135 APPENDIX MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can enjoy your new TV. Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen 1 2 Heres a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until its almost dry, and then use it to wipe the screen. Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV. Cleaning the Cabinet To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth. Please be sure not to use a wet cloth. Extended Absence CAUTION G If you expect to leave your TV dormant for a long time (such as a vacation), its a good idea to unplug the power cord to protect against possible damage from lightning or power surges. A P P E N D I X 136 PRODUCT SPECIFICATIONS Dimensions
(Width x Height x Depth) MODELS With stand 50PS80
(50PS80-UA) 60PS80
(60PS80-UA) 48.4 x 32.9 x 12.2 inches 1228.0 x 835.8 x 309.0 mm 57.7 x 38.6 x 15.5 inches 1465.4 x 982.6 x 395.5 mm Without stand 48.4 x 31.3 x 3.1 inches 1228.0 x 795.1 x 78.9 mm 57.7 x 36.5 x 3.2 inches 1465.4 x 926.7 x 82.1 mm Weight With stand Without stand MODELS With stand Dimensions
(Width x Height x Depth) 84.4 lbs / 38.3 kg 75.6 lbs / 34.3 kg 42LH50
(42LH50-UA) 115.5 lbs / 52.4 kg 102.7 lbs / 46.6 kg 47LH50
(47LH50-UA) 41.4 x 28.3 x 11.6 inches 1052.2 x 719.1 x 296.2 mm 46.1 x 31.0 x 13.2 inches 1173.4 x 789.7 x 337.4 mm Without stand 41.5 x 25.8 x 3.5 inches 1052.2 x 657.3 x 90.8 mm 46.1 x 28.4 x 3.9 inches 1173.4 x 723.4 x 100.8 mm Weight With stand Without stand 41.8 lbs / 19.0 kg 37.9 lbs / 17.2 kg 51.5 lbs / 23.4 kg 45.8 lbs / 20.8 kg Power requirement Television System Program Coverage External Antenna Impedance Environment condition Operating Temperature Operating Humidity Storage Temperature Storage Humidity AC100-240V ~ 50/60Hz NTSC-M, ATSC, 64 & 256 QAM VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135 75 ohm 32 ~ 104F (0 ~ 40C) Less than 80%
-4 ~ 140F (-20 ~ 60C) Less than 85%
The specifications shown above may be changed without prior notice for quality improvement. A P P E N D I X 137 APPENDIX IR CODES 1. How to Connect Connect your wired remote control to the Remote Control port on the TV. 2. Remote Control IR Codes Output waveform Single pulse, modulated with 37.917KHz signal at 455KHz Tc T1 Carrier frequency FCAR = 1/TC = fOSC/12 Duty ratio = T1/TC = 1/3 Configuration of frame 1st frame Lead code Low custom code High custom code Data code Data code C0 C1 C2 C3 C4 C5 C6 C7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7 Repeat frame Lead code Repeat code Repeat code Tf 9 ms 4.5 ms 9 ms 2.25 ms Bit description Bit 0 0.55 ms Bit 1 0.56 ms 1.12 ms 0.56 ms 2.24 ms Frame interval: Tf The waveform is transmitted as long as a key is depressed. Tf Tf Tf=108ms @455KHz A P P E N D I X 138 Code
(Hexa) Function Note Code
(Hexa) Function Note 08 45 43 0B POWER Q.MENU MENU INPUT Remote control Button (Power On/Off) D6 TV Discrete IR Code Remote control Button
(TV Input Selection) Remote control Button C4 POWER ON Discrete IR Code Remote control Button
(Only Power On) 10-19 Number Key 0-9 Remote control Button C5 POWER OFF Discrete IR Code
- (Dash)/LIST Remote control Button FLASHBK Remote control Button 5A AV1 MUTE/DELETE Remote control Button
(Only Power Off) Discrete IR Code
(AV1 Input Selection) VOL +
VOL -
CH CH Remote control Button D0 AV2 Discrete IR Code Remote control Button
(AV2 Input Selection) Remote control Button BF COMPONENT1 Discrete IR Code Remote control Button
(Component1 Input Selection) FAV/MARK/ CHAR/NUM Remote control Button D4 COMPONENT2 Discrete IR Code Remote control Button
(Component2 Input Selection) Remote control Button D5 RGB-PC Discrete IR Code Remote control Button
(RGB-PC Input Selection) Remote control Button CE HDMI1 Discrete IR Code Remote control Button
(HDMI1 Input Selection) Remote control Button CC HDMI2 Discrete IR Code ENTER RETURN RATIO FREEZE Remote control Button Remote control Button ENERGY SAVING Remote control Button SIMPLINK Remote control Button INFO AV MODE WIDGETS NETCAST RED GREEN Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button YELLOW (G) Remote control Button BLUE (l l) Remote control Button A G l l FF GG Remote control Button Remote control Button Remote control Button Remote control Button Remote control Button E9 DA 76 77 AF
(HDMI2 Input Selection) HDMI3 Discrete IR Code
(HDMI3 Input Selection) HDMI4 Discrete IR Code
(HDMI4 Input Selection) Ratio 4:3 Discrete IR Code
(Only 4:3 Mode) Ratio 16:9 Discrete IR Code
(Only 16:9 Mode) Ratio Zoom Discrete IR Code
(Only Zoom Mode) A P P E N D I X 139 4C 1A 09 02 03 00 01 1E 40 41 07 06 44 28 79
95 7E AA 30 58 59 72 71 63 61 B1 B0 BA 8F 8E APPENDIX EXTERNAL CONTROL THROUGH RS-232C The RS-232C port allows you connect the RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the TVs functions externally. Note: RS-232C on this unit is intended to be used with third party RS-232C control hardware and software. The instructions below are provided to help with programming software or to test functionality using telenet software. RS-232C Setup i.e) AV IN 1
/DVI IN VIDEO L
MONO
) AUDIO R RGB IN (PC) 3 2 1 L R VIDEO COMPONENT IN AUDIO AUDIO IN
(RGB/DVI) OPTICAL DIGITAL AUDIO OUT RS-232C IN
(CONTROL&SERVICE) ANTENNA/
CABLE IN PC Type of Connector; D-Sub 9-Pin Male Communication Parameters Baud rate : 9600 bps (UART) Data length : 8 bits Parity : None Stop bit : 1 bit Communication code : ASCII code Use a crossed (reverse) cable.
NOTE G This product has command echo back in the RS-232C Command. No. Pin Name 1 2 3 4 5 6 7 8 9 No connection RXD (Receive data) TXD (Transmit data) DTR (DTE side ready) GND DSR (DCE side ready) RTS (Ready to send) CTS (Clear to send) No Connection 1 6 5 9 A P P E N D I X 140 RS-232C Configurations Either cable below can be used. 7-Wire Configuration
(Serial female-female NULL modem cable) PC TV RXD TXD GND DTR DSR RTS CTS 2 3 5 4 6 7 8 3 2 5 6 4 8 7 TXD RXD GND DSR DTR CTS RTS 3-Wire Configurations
(Not standard) PC TV RXD TXD GND DTR DSR RTS CTS 2 3 5 4 6 7 8 3 2 5 6 4 7 8 TXD RXD GND DTR DSR RTS CTS D-Sub 9 D-Sub 9 D-Sub 9 D-Sub 9 Set ID Use this function to specify a TV ID number. Refer to Real Data Mapping. OPTION Move Enter OPTION Move Enter E SIMPLINK Key Lock Simple Manual Caption Set ID ISM Method Demo Mode Initial Setting
: On
: Off
: Off
: 1
: Off
: Home Use Select OPTION. Select Set ID. Choose the desired TV ID number. The adjustment range of Set ID is 1~99. Return to the previous menu. Return to TV viewing. 1 MENU 2 3 ENTER ENTER 4RETURN MENU E SIMPLINK Key Lock Simple Manual Caption Set ID ISM Method Demo Mode Initial Setting
: On
: Off
: Off
: 1 F 1 G
: Off
: Home Use Close Real data mapping 0 : Step 0 A : Step 10 (SET ID 10) F : Step 15 (SET ID 15) 10 : Step 16 (SET ID 16) 63 : Step 99 (SET ID 99) 64 : Step 100 A P P E N D I X 141 APPENDIX Command Reference List COMMAND1 COMMAND2 DATA
(Hexadecimal) COMMAND1 COMMAND2 DATA
(Hexadecimal) 01. Power 02. Input Select 03. Aspect Ratio 04. Screen Mute 05. Volume Mute 06. Volume Control 07. Contrast 08. Brightness 09. Color 10. Tint 11. Sharpness 12. OSD Select 13. Remote Control Lock Mode k x k k k k k k k k k k k a b c d e f g h i j k l m 00 ~ 01
(G p.141)
(G p.141)
(G p.141) 00 ~ 01 00 ~ 64 00 ~ 64 00 ~ 64 00 ~ 64 00 ~ 64 00 ~ 64 00 ~ 01 00 ~ 01 14. Treble 15. Bass 16. Balance 17. Color Temperature 18. ISM Method 19. Energy Saving 20. Auto Configuration 22. Channel Add/Del 23. Key 24. Backlight k k k k j j j m m m Only Plasma TV Model r s t u p q u b c g 00 ~ 64 00 ~ 64 00 ~ 64 00 ~ 02
(G p.142)
(G p.142)
(G p.142) 00 ~ 01
(G p.143) 00 ~ 64 Only LCD TV Model COMMAND1 COMMAND2 DATA00 DATA01 DATA02 DATA03 DATA04 DATA05
(Hexadecimal)
(Hexadecimal)
(Hexadecimal)
(Hexadecimal)
(Hexadecimal)
(Hexadecimal) 21. Channel Tuning m a physical major major low minor high minor low attribute program high program low Transmission / Receiving Protocol Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
[Command 1] : First command to control the set.(j, k, m or x)
[Command 2] : Second command to control the set.
[Set ID] : You can adjust the set ID to choose desired TV ID number in Setup menu. Adjustment range is 1~ 99. When selecting Set ID 0, every connected the TV is controlled. Set ID is indicated as decimal (1~ 99) on menu and as Hexa decimal (0x0~0x63) on transmission
/receiving protocol.
[DATA] : To transmit the command data. Transmit the FF data to read status of command.
[Cr] : Carriage Return ASCII code 0x0D
[ ] : ASCII code space (0x20)
* In this model, TV will not send the status during the standby mode. OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]
The TV transmits ACK (acknowledgement) based on this for-
mat when receiving normal data. At this time, if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the data of the PC computer.
* In this model, TV will not send the status during the standby mode.
* Data Format
[Command 2] : Use as command.
[Set ID] : Use the small character, if set ID is 10, it will send the 0, a.
[DATA] : Use the small character, if data is 0 x ab, it will send the a, b.
[OK] : Use the large character. Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
The TV transmits ACK (acknowledgement) based on this for-
mat when receiving abnormal data from non-viable functions or communication errors. Data1: Illegal Code Data2: Not supported function Data3: Wait more time
* In this model, TV will not send the status during the standby mode.
* Data Format
[Command 2] : Use as command.
[Set ID] : Use the small character, if set ID is 10, it will send the 0, a.
[DATA] : Use the small character, if data is 0 x ab, it will send the a, b.
[NG] : Use the large character A P P E N D I X 142 01. Power (Command: k a) Acknowledgement [e][ ][Set ID][ ][OK/NG][Data][x]
To control Power On/Off of the TV. Transmission [k][a][ ][Set ID][ ][Data][Cr]
Data 00: Power Off Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x]
* In a like manner, if other functions transmit FF data Data 01: Power On based on this format, Acknowledgement data feedback presents status about each function.
* Note: In this model, TV will send the Acknowledge after power on processing completion. There might be a time delay between command and acknowledge. Data 01: DTV (Cable) 02. Input Select (Command: x b) To select input source for TV. Transmission [x][b][ ][Set ID][ ][Data][Cr]
Data 00: DTV (Antenna) Data 10: Analog (Antenna) Data 11: Analog (Cable) Data 20: AV1 Data 40: Component1 Data 60: RGB-PC Data 91: HDMI2 Data 93: HDMI4 Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]
Data 21: AV2 Data 41: Component 2 Data 90: HDMI1 Data 92: HDMI3 03. Aspect Ratio (Command: k c) To adjust the screen format. Transmission [k][c][ ][Set ID][ ][Data][Cr]
Data 01: 4:3 09: Just scan 10: Cinema Zoom1 02: 16:9 04: Zoom 06: Set by program 1F: Cinema Zoom16 Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]
04. Screen Mute (Command: k d) To select screen mute on/off. Transmission [k][d][ ][Set ID][ ][Data][Cr]
Data 00: Screen mute off (Picture on), Video-out Mute off Data 01: Screen mute on (Picture off) Data 10: Video-out Mute on Acknowledgement [d][ ][Set ID][ ][OK/NG][Data][x]
* In case of Video-out Mute on only, TV will display On Screen Display (OSD). But, in case of screen mute on, TV will not display On Screen Display (OSD). 05. Volume Mute (Command: k e) To control volume mute on/off. You can also adjust mute using the MUTE button on remote control. Transmission [k][e][ ][Set ID][ ][Data][Cr]
Data 00: Volume mute on (Volume off) Data 01: Volume mute off (Volume on) 06. Volume Control (Command: k f) To adjust volume. You can also adjust volume with the volume buttons on remote control. Transmission [k][f][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)
*Refer to Real data mapping. Acknowledgement [f][ ][Set ID][ ][OK/NG][Data][x]
07. Contrast (Command: k g) To adjust screen contrast. You can also adjust contrast in the PICTURE menu. Transmission [k][g][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)
*Refer to Real data mapping. Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x]
08. Brightness (Command: k h) To adjust screen brightness. You can also adjust brightness in the PICTURE menu. Transmission [k][h][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)
*Refer to Real data mapping. Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x]
09. Color (Command: k i) To adjust screen color. You can also adjust color in the PICTURE menu. Transmission [k][i][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)
*Refer to Real data mapping. Acknowledgement [i][ ][Set ID][ ][OK/NG][Data][x]
10. Tint (Command: k j) To adjust screen tint. You can also adjust tint in the PICTURE menu. Transmission [k][j][ ][Set ID][ ][Data][Cr]
Data Red: 00 ~ Green: 64 (*transmit by Hexadecimal code)
*Refer to Real data mapping. Acknowledgement [ j ][ ][Set ID][ ][OK/NG][Data][x]
11. Sharpness (Command: k k) To adjust screen sharpness. You can also adjust sharpness in the PICTURE menu. Transmission [k][k][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)
*Refer to Real data mapping. Acknowledgement [k][ ][Set ID][ ][OK/NG][Data][x]
A P P E N D I X 143 APPENDIX 12. OSD Select (Command: k l) 18. ISM Method (Command: j p) To select OSD (On Screen Display) on/off. Transmission [k][l][ ][Set ID][ ][Data][Cr]
(For Plasma TV) To avoid having a fixed image remain on screen. Data 00: OSD off Data 01: OSD on Transmission [ j ][p][ ][Set ID][ ][Data][Cr]
Acknowledgement [l][ ][Set ID][ ][OK/NG][Data][x]
13. Remote Control Lock Mode (Command: k m) To lock the remote control and the front panel controls on the set. Transmission [k][m][ ][Set ID][ ][Data][Cr]
Data 00: Lock off Data 01: Lock on Acknowledgement [m][ ][Set ID][ ][OK/NG][Data][x]
If youre not using the remote control and front panel controls on the TV, use this mode. When main power is on/off, remote control lock is released. If Key Lock is on in the standby mode, TV will not turn on by POWER button of remote control and on the TV. 14. Treble (Command: k r) To adjust treble. You can also adjust treble in the AUDIO menu. Transmission [k][r][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)
*Refer to Real data mapping. Acknowledgement [r][ ][Set ID][ ][OK/NG][Data][x]
15. Bass (Command: k s) To adjust bass. You can also adjust bass in the AUDIO menu. Transmission [k][s][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)
*Refer to Real data mapping. Acknowledgement [s][ ][Set ID][ ][OK/NG][Data][x]
16. Balance (Command: k t) To adjust balance. You can also adjust balance in the AUDIO menu. Transmission [k][t][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code)
*Refer to Real data mapping. Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x]
17. Color Temperature (Command: k u) To adjust color temperature. Data 02: Orbiter 08: Normal 04: White Wash 20: Color Wash Acknowledgement [p][ ][Set ID][ ][OK/NG][Data][x]
19. Energy Saving (Command: j q) To control the energy saving function. Transmission [ j ][q][ ][Set ID][ ][Data][Cr]
Data 00: Energy saving - off 01: Energy saving - Minimum 02: Energy saving - Medium 03: Energy saving - Maximum 04: Energy saving - Auto 05: Energy saving - Screen off 10: Intelligent Sensor - Low For LCD TV 11: Intelligent Sensor - Middle For Plasma TV 12: Intelligent Sensor - High Acknowledgement [q][ ][Set ID][ ][OK/NG][Data][x]
20. Auto Configuration (Command: j u) To adjust picture position and minimize image shaking automatically. Auto configuration only works in RGB-PC mode. Transmission [ j ][u][ ][Set ID][ ][Data][Cr]
Data 01: To set Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]
21. Channel Tuning (Command: m a) To tune channel to following physical/major/minor number. Transmission [m][a][ ][Set ID][ ][Data00][ ][Data01]
[ ][Data02][ ][Data03][ ][Data04][ ][Data05][Cr]
Digital channels have a Physical, Major, and Minor channel number. The Physical number is the actual digital channel number, the Major is the number that the channel should be mapped to, and the Minor is the sub-channel. Since the ATSC tuner automatically maps the channel to the Major number, the Physical number is not required when sending a command. Data 00: Physical Channel Number NTSC air: 02~45, NTSC cable: 01, 0E~7D ATSC air: 01~45, ATSC cable: 01~87 You can also adjust color temperature in the PICTURE menu. Data 01 & 02: Major Channel Number Transmission [k][u][ ][Set ID][ ][Data][Cr]
Data 00: Medium 01: Cool 02: Warm Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]
Data 01: High byte Data 02: Low byte Two bytes are available for the Major and Minor, nor-
mally only the second byte is used. Data 03 & 04: Minor Channel Number Not needed for NTSC. A P P E N D I X 144 Data5:
7 0 1 Main/Sub Picture Main Sub 6 0 1 Two/One Part Channel Two One 5 0 1 Using Physical Channel 4 Reserved Use No Use x x x x x x x x x x 3 0 0 0 0 0 0 0 0 x 1 2 0 0 0 0 1 1 1 1 x 1 1 0 0 1 1 0 0 1 1 x 1 0 0 1 0 1 0 1 0 1 x 1 Step NTSC Air NTSC Cable ATSC Air ATSC Cable_std ATSC Cable_hrc ATSC Cable_irc ATSC cable_auto Reserved
... Reserved The table above lists the binary code which must be converted to Hexadecimal before sending. For example:
The binary code to tune the sub source to an NTSC cable channel is 1000 0001, which translates to 81 in Hex.
* 7th bit : For which source do you want to change the channel.
* 6th bit: Use a two part or one part channel. Most cases just use 0 since its ignored when using NTSC.
* 5th bit: Use 0 with NTSC since it can only use the phys-
ical channel number. Normally use 1 for ATSC since most times it doesnt matter what the physical number is.
* 4th bit: Set to 0.
* 3-0 bits: Choose signal type.
* Tune Command Examples:
22. Channel Add/Del (Command: m b) To add and delete the channels. Transmission [m][b][ ][Set ID][ ][Data][Cr]
Data 00: Channel Delete Data 01: Channel Add Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]
23. Key (Command: m c) To send IR remote control code. Transmission [m][c][ ][Set ID][ ][Data][Cr]
See page 115. Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]
When TV is in the standby mode, TV will turn on by POWER button of remote control only. 1. Tune to the analog (NTSC) cable channel 35. 24. Backlight (Command: m g) Data 00 = Physical of 35 = 23 Data 01 & 02 = No Major = 00 00 Data 03 & 04 = No Minor = 00 00 Data 05 = 0000 0001 in binary = 01 Total = ma 00 23 00 00 00 00 01
(For LCD TV) To adjust screen backlight. Transmission [m][g][ ][Set ID][ ][Data][Cr]
Data Min:00 ~ Max:64 (*transmit by Hexadecimal code)
*Refer to Real data mapping. 2. Tune to the digital (ATSC) local channel 30-3. Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x]
Data 00 = Dont know Physical = 00 Data 01 & 02 = Major is 30 = 00 1E Data 03 & 04 = Minor is 3 = 00 03 Data 05 = 0010 0010 in binary = 22 Total = ma 00 00 00 1E 00 03 22 Acknowledgement[a][ ][Set ID][ ][OK][Data00][Data01]
[Data02][Data03][Data04][x][a][ ][Set ID]
[ ][NG][Data00][x]
A P P E N D I X 145 APPENDIX OPEN SOURCE LICENSE GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone's free use or not licensed at all. Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free software - to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundation's software and to any other program whose authors commit to using it. (Some other free software foundation software is covered by the GNU Lesser General Public License instead.) You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things. To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it. For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights. We protect your rights with two steps: (1) copyright the soft-
ware, and (2) offer you this license which gives you legal permis-
sion to copy, distribute and/or modify the software. Also, for each author's protection and ours, we want to make cer-
tain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors' reputations. The precise terms and conditions for copying, distribution and modification follow. GNU GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This license applies to any program or other work which con-
tains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The
"Program", below, refers to any such program or work, and a
"work based on the Program" means either the Program or any derivative work under copyright law: that is to say, a work con-
taining the Program or a portion of it, either verbatim or with modifications and/or translated into another language.
(Hereinafter, translation is included without limitation in the term "modification".) Each licensee is addressed as "you". Activities other than copying, distribution and modification are not covered by this license; they are outside its scope. The act of running the Program is not restricted, and the out-
put from the program is covered only if its contents constitute a work based on the program (independent of having been made by running the program). Whether that is true depends on what the program does. 1. You may copy and distribute verbatim copies of the program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this license and to the absence of any warranty; and give any other recipients of the program a copy of this license along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2. You may modify your copy or copies of the program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or work under the terms of section 1 above, provided that you also meet all of these conditions:
Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change. A P P E N D I X 146 b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part there of, to be licensed as a whole at no charge to all third parties under the terms of this license. c) If the modified program normally reads commands interac-
tively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this license.
(Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this license, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the dis-
tribution of the whole must be on the terms of this license, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or con-
test your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the program. In addition, mere aggregation of another work not based on the program with the Program (or with a work based on the program) on a volume of a storage or distribution medium does not bring the other work under the scope of this license. 3. You may copy and distribute the program (or a work based on it, under section 2) in object code or executable form under the terms of sections 1 and 2 above provided that you also do one of the following:
a) Accompany it with the complete corresponding machine-
readable source code, which must be distributed under the terms of sections 1 and 2 above on a medium customarily used for software interchange; or, b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of sections 1 and 2 above on a medium customarily used for software interchange; or, c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alter-
native is allowed only for noncommercial distribution and only if you received the program in object code or exe-
cutable form with such an offer, in accord with Subsection b above.) The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source code for all mod-
ules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. If distribution of executable or object code is made by offer-
ing access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code. 4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this license. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this license. However, parties who have received copies, or rights, from you under this license will not have their licens-
es terminated so long as such parties remain in full compli-
ance. 5. You are not required to accept this license, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this license. Therefore, by modifying or distributing the program
(or any work based on the program), you indicate your accep-
tance of this license to do so, and all its terms and conditions for copying, distributing or modifying the program or works based on it. 6. Each time you redistribute the program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforc-
ing compliance by third parties to this license. A P P E N D I X 147 APPENDIX 7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the con-
ditions of this license, they do not excuse you from the con-
ditions of this license. If you cannot distribute so as to satis-
fy simultaneously your obligations under this license and any other pertinent obligations, then as a consequence you may not distribute the program at all. For example, if a patent license would not permit royalty-free redistribution of the program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this license would be to refrain entirely from distribution of the program. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest valid-
ity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution sys-
tem, which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this license. 8. If the distribution and/or use of the program is restricted in certain countries either by patents or by copyrighted inter-
faces, the original copyright holder who places the program under this license may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this license incorporates the limitation as if written in the body of this license. 9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present ver-
sion, but may differ in detail to address new problems or con-
cerns. Each version is given a distinguishing version number. If the program specifies a version number of this license which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of A P P E N D I X 148 any later version published by the Free Software Foundation. If the program does not specify a version number of this license, you may choose any version ever published by the Free Software Foundation. 10.If you wish to incorporate parts of the program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copy-
righted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of pro-
moting the sharing and reuse of software generally. NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLD-
ERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 12.IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PRO-
GRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUS-
TAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. END OF TERMS AND CONDITIONS How to apply these terms to your new programs If you develop a new program, and you want it to be of the great-
est possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms. To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effective-
ly convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found. one line to give the program's name and a brief idea of what it does. Copyright (C) <year> <name of author>
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the license, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PUR-
POSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. Also add information on how to contact you by electronic and paper mail. If the program is interactive, make it output a short notice like this when it starts in an interactive mode:
Gnomovision version 69, Copyright (C) year name of author Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type show w. This is free software, and you are welcome to redistribute it under certain conditions; type show c for details. The hypothetical commands show w and show c should show the appropriate parts of the General Public License. Of course, the commands you use may be called something other than show w and show c; they could even be mouse-clicks or menu items-whatever suits your program. You should also get your employer (if you work as a programmer) or your school, if any, to sign a copyright disclaimer for the pro-
gram, if necessary. Here is a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the pro-
gram Gnomovision (which makes passes at compilers) written by James Hacker. signature of Ty Coon, 1 April 1989 Ty Coon, President of Vice This General Public License does not permit incorporating your program into proprietary programs. If your program is a subrou-
tine library, you may consider it more useful to permit linking pro-
prietary applications with the library. If this is what you want to do, use the GNU Lesser General Public License instead of this license. A P P E N D I X 149 APPENDIX GNU LESSER GENERAL PUBLIC LICENSE Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
[This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, ver-
sion 2, hence the version number 2.1.]
Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public Licenses are intended to guarantee your freedom to share and change free software - to make sure the software is free for all its users. This license, the Lesser General Public License, applies to some specially designated software packages - typically libraries - of the Free Software Foundation and other authors who decide to use it. You can use it too, but we suggest you first think careful-
ly about whether this license or the ordinary General Public License is the better strategy to use in any particular case, based on the explanations below. When we speak of free software, we are referring to freedom of use, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free soft-
ware (and charge for this service if you wish); that you receive source code or can get it if you want it; that you can change the software and use pieces of it in new free programs; and that you are informed that you can do these things. To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or to ask you to surrender these rights. These restrictions translate to certain responsibilities for you if you distribute copies of the library or if you modify it. For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the rights that we gave you. You must make sure that they, too, receive or can get the source code. If you link other code with the library, you must provide complete object files to the recipients, so that they can relink them with the library after making changes to the library and recompiling it. And you must show them these terms so they know their rights. We protect your rights with a two-step method: (1) we copyright the library, and (2) we offer you this license, which gives you legal permission to copy, distribute and/or modify the library. To protect each distributor, we want to make it very clear that there is no warranty for the free library. Also, if the library is mod-
ified by someone else and passed on, the recipients should know that what they have is not the original version, so that the origi-
nal author's reputation will not be affected by problems that might be introduced by others. Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure that a company can-
not effectively restrict the users of a free program by obtaining a restrictive license from a patent holder. Therefore, we insist that any patent license obtained for a version of the library must be consistent with the full freedom of use specified in this license. Most GNU software, including some libraries, is covered by the ordinary GNU General Public License. This license, the GNU Lesser General Public License, applies to certain designated libraries, and is quite different from the ordinary General Public License. We use this license for certain libraries in order to per-
mit linking those libraries into non-free programs. When a program is linked with a library, whether statically or using a shared library, the combination of the two is legally speaking a combined work, a derivative of the original library. The ordinary General Public License therefore permits such linking only if the entire combination fits its criteria of freedom. The Lesser General Public License permits more lax criteria for linking other code with the library. We call this license the "Lesser" General Public License because it does Less to protect the user's freedom than the ordinary General Public License. It also provides other free software devel-
opers Less of an advantage over competing non-free programs. These disadvantages are the reason we use the ordinary General Public License for many libraries. However, the Lesser license pro-
vides advantages in certain special circumstances. For example, on rare occasions, there may be a special need to encourage the widest possible use of a certain library, so that it becomes a de-facto standard. To achieve this, non-free programs must be allowed to use the library. A more frequent case is that a free library does the same job as widely used non-free libraries. In this case, there is little to gain by limiting the free library to free software only, so we use the Lesser General Public License. In other cases, permission to use a particular library in non-free programs enables a greater number of people to use a large body of free software. For example, permission to use the GNU C Library in non-free programs enables many more people to use the whole GNU operating system, as well as its variant, the GNU/Linux operating system. A P P E N D I X 150 Although the Lesser General Public License is Less protective of the users' freedom, it does ensure that the user of a program that is linked with the Library has the freedom and the wherewithal to run that program using a modified version of the Library. each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this license and to the absence of any warranty; and distribute a copy of this license along with the Library. The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference between a "work based on the library" and a "work that uses the library". The former contains code derived from the library, whereas the latter must be combined with the library in order to run. GNU LESSER GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This license agreement applies to any software library or other program which contains a notice placed by the copyright hold-
er or other authorized party saying it may be distributed under the terms of this Lesser General Public License (also called this license). Each license is addressed as "you". A library means a collection of software functions and/or data prepared so as to be conveniently linked with application programs (which use some of those functions and data) to form executables. The Library, below, refers to any such software library or work which has been distributed under these terms. A work based on the Library means either the Library or any derivative work under copyright law: that is to say, a work containing the library or a portion of it, either verbatim or with modifications and/or translated straightforwardly into another language.
(Hereinafter, translation is included without limitation in the term modification.) Source code for a work means the preferred form of the work for making modifications to it. For a library, complete source code means all the source code for all modules it con-
tains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the library. Activities other than copying, distribution and modification are not covered by this license; they are outside its scope. The act of running a program using the Library is not restrict-
ed, and output from such a program is covered only if its con-
tents constitute a work based on the library (independent of the use of the Library in a tool for writing it). Whether that is true depends on what the library does and what the program that uses the library does. 1. You may copy and distribute verbatim copies of the library's complete source code as you receive it, in any medium, pro-
vided that you conspicuously and appropriately publish on You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and copy and distribute such modifications or work under the terms of section 1 above, provided that you also meet all of these conditions:
a) The modified work must itself be a software library. b) You must cause the files modified to carry prominent notices stating that you changed the files and the date of any change. c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this license. d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that uses the facility, other than as an argument passed when the facility is invoked, then you must make a good faith effort to ensure that, in the event an application does not supply such function or table, the facility still operates, and performs whatever part of its purpose remains meaningful.
(For example, a function in a library to compute square roots has a purpose that is entirely well-defined independent of the application. Therefore, Subsection 2d requires that any appli-
cation-supplied function or table used by this function must be optional: if the application does not supply it, the square root function must still compute square roots.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the library, and can be reasonably considered independent and separate works in themselves, then this license, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the library, the dis-
tribution of the whole must be on the terms of this license, whose permissions for other licenses extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or con-
test your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the library. In addition, mere aggregation of another work not based on the library with the library (or with a work based on the library) on a volume of a storage or distribution medium does not bring the other work under the scope of this license. A P P E N D I X 151 APPENDIX 3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library. To do this, you must alter all the notices that refer to this License, so that they refer to the ordinary GNU General Public License, version 2, instead of to this License. (If a newer version than version 2 of the ordinary GNU General Public License has appeared, then you can specify that version instead if you wish.) Do not make any other change in these notices. Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License applies to all subsequent copies and derivative works made from that copy. This option is useful when you wish to copy part of the code of the library into a program that is not a library. 4. You may copy and distribute the library (or a portion or deriv-
ative of it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you accompany it with the complete corresponding machine-
readable source code, which must be distributed under the terms of sections 1 and 2 above on a medium customarily used for software interchange. If distribution of object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place satisfies the requirement to distribute the source code, even though third parties are not compelled to copy the source along with the object code. 5. A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being compiled or linked with it, is called a work that uses the Library. Such a work, in isolation, is not a derivative work of the Library, and therefore falls outside the scope of this license. However, linking a work that uses the library with the Library creates an executable that is a derivative of the Library
(because it contains portions of the library), rather than a work that uses the library. The executable is therefore cov-
ered by this license. Section 6 states terms for distribution of such executable. When a work that uses the library uses material from a head-
er file that is part of the library, the object code for the work may be a derivative work of the library even though the source code is not. Whether this is true is especially significant if the work can be linked without the library, or if the work is itself a library. The threshold for this to be true is not precisely defined by law. If such an object file uses only numerical parameters, data structure layouts and accessories, and small macros and small inline functions (ten lines or less in length), then the use of the object file is unrestricted, regardless of whether it is legal-
ly a derivative work. (Executable containing this object code plus portions of the library will still fall under Section 6.) Otherwise, if the work is a derivative of the library, you may distribute the object code for the work under the terms of Section 6. Any executable containing that work also fall under Section 6, whether or not they are linked directly with the library itself. 6. As an exception to the sections above, you may also combine or link a "work that uses the library" with the library to pro-
duce a work containing portions of the library, and distribute that work under terms of your choice, provided that the terms permit modification of the work for the customer's own use and reverse engineering for debugging such modifications. You must give prominent notice with each copy of the work that the library is used in it and that the Library and its use are covered by this license. You must supply a copy of this license. If the work during execution displays copyright notices, you must include the copyright notice for the library among them, as well as a reference directing the user to the copy of this license. Also, you must do one of these things:
a) Accompany the work with the complete corresponding machine-readable source code for the library including whatever changes were used in the work (which must be distributed under Sections 1 and 2 above); and, if the work is an executable linked with the Library, with the complete machine-readable work that uses the Library, as object code and/or source code, so that the user can modify the library and then relink to produce a modified executable containing the modified library. (It is understood that the user who changes the contents of definitions files in the library will not necessarily be able to recompile the appli-
cation to use the modified definitions.) b) Use a suitable shared library mechanism for linking with the library. A suitable mechanism is one that (1) uses at run time a copy of the library already present on the users computer system, rather than copying library functions into the exe-
cutable, and (2) will operate properly with a modified version of the library, if the user installs one, as long as the modified version is interface-compatible with the version that the work was made with. c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified in Subsection 6, above, for a charge no more than the cost of performing this distribution. d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy the above specified materials from the same place. e) Verify that the user has already received a copy of these materials or that you have already sent this user a copy. A P P E N D I X 152 For an executable, the required form of the "work that uses the library" must include any data and utility programs need-
ed for reproducing the executable from it. However, as a spe-
cial exception, the materials to be distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the exe-
cutable. It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normal-
ly accompany the operating system. Such a contradiction means you cannot use both them and the library together in an executable that you distribute. 7. You may place library facilities that are a work based on the library side-by-side in a single library together with other library facilities not covered by this license, and distribute such a combined library, provided that the separate distribu-
tion of the work based on the Library and of the other library facilities is otherwise permitted, and provided that you do these two things:
a) Accompany the combined library with a copy of the same work based on the Library, uncombined with any other library facilities. This must be distributed under the terms of the sections above. b) Give prominent notice with the combined library of the fact that part of it is a work based on the library, and explaining where to find the accompanying uncombined form of the same work. 8. You may not copy, modify, sublicense, link with, or distribute the library except as expressly provided under this license. Any attempt otherwise to copy, modify, sublicense, link with, or distribute the library is void, and will automatically termi-
nate your rights under this license. However, parties who have received copies, or rights, from you under this license will not have their licenses terminated so long as such parties remain in full compliance. 9. You are not required to accept this license, since you have not signed it. However, nothing else grants you permission to mod-
ify or distribute the library or its derivative works. These actions are prohibited by law if you do not accept this license. Therefore, by modifying or distributing the library (or any work based on the library), you indicate your acceptance of this license to do so, and all its terms and conditions for copying, distributing or modifying the library or works based on it. 10.Each time you redistribute the library (or any work based on the Library), the recipient automatically receives a license from the original licensor to copy, distribute, link with or mod-
ify the library subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties with this license. 11. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the con-
ditions of this license, they do not excuse you from the con-
ditions of this license. If you cannot distribute so as to satis-
fy simultaneously your obligations under this license and any other pertinent obligations, then as a consequence you may not distribute the library at all. For example, if a patent license would not permit royalty-free redistribution of the library by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this license would be to refrain entirely from distribution of the library. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply, and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest valid-
ity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution sys-
tem which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a license cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this license. 12.If the distribution and/or use of the library is restricted in cer-
tain countries either by patents or by copyrighted interfaces, the original copyright holder who places the library under this license may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this license incorporates the limitation as if written in the body of this license. 13.The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the library specifies a version number of this license which applies to it and any later version, you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. A P P E N D I X 153 To apply these terms, attach the following notices to the library. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the copyright line and a pointer to where the full notice is found. one line to give the library's name and a brief idea of what it does. Copyright (C) <year> <name of author>
This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the license, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PUR-
POSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Also add information on how to contact you by electronic and paper mail. You should also get your employer (if you work as a programmer) or your school, if any, to sign a copyright disclaimer for the library, if necessary. Here is a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the library Frob (a library for tweaking knobs) written by James Random Hacker. signature of Ty Coon, 1 April 1990 Ty Coon, President of Vice APPENDIX If the library does not specify a license version number, you may choose any version ever published by the Free Software Foundation. 14.If you wish to incorporate parts of the library into other free programs whose distribution conditions are incompatible with these, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make excep-
tions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY 15.BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLD-
ERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 16.IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUS-
TAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. END OF TERMS AND CONDITIONS How to apply these terms to your new libraries If you develop a new library, and you want it to be of the great-
est possible use to the public, we recommend making it free soft-
ware that everyone can redistribute and change. You can do so by permitting redistribution under these terms (or, alternatively, under the terms of the ordinary General Public License). A P P E N D I X 154 MOZILLA PUBLIC LICENSE Version 1.1
1.Definitions. 1.0.1. Commercial use means distribution or otherwise making the covered code available to a third party. 1.1. Contributor means each entity that creates or con-
tributes to the creation of modifications. 1.2. 1.3. 1.4. Contributor version means the combination of the orig-
inal code, prior modifications used by a contributor, and the modifications made by that particular contributor. Covered code means the original code or modifications or the combination of the original code and modifications, in each case including portions thereof. Electronic distribution mechanism means a mechanism generally accepted in the software development communi-
ty for the electronic transfer of data. 1.5. Executable means covered code in any form other than source code. 1.6. 1.7. Initial developer means the individual or entity identified as the initial Developer in the Source Code notice required by exhibit A. Larger work means a work which combines covered code or portions thereof with code not governed by the terms of this License. 1.8. License means this document. 1.8.1. Licensable means having the right to grant, to the maxi-
mum extent possible, whether at the time of the initial grant or subsequently acquired, any and all of the rights conveyed herein. 1.9. Modifications means any addition to or deletion from the substance or structure of either the original code or any previous modifications. When covered code is released as a series of files, a modification is:
A. Any addition to or deletion from the contents of a file containing original code or previous modifications. B. Any new file that contains any part of the original code or previous modifications. 1.10. Original code means source code of computer software code which is described in the source code notice required by exhibit as original code, and which, at the time of its release under this license is not already covered code governed by this license. 1.10.1.Patent claims means any patent claim(s), now owned or hereafter acquired, including without limitation, method, process, and apparatus claims, in any patent licensable by grantor. 1.11. Source code means the preferred form of the covered code for making modifications to it, including all modules it contains, plus any associated interface definition files, scripts used to control compilation and installation of an executable, or source code differential comparisons against either the original code or another well known, available covered code of the contributor's choice. The source code can be in a compressed or archival form, pro-
vided the appropriate decompression or de-archiving soft-
ware is widely available for no charge. 1.12. You (or Your) means an individual or a legal entity exercising rights under, and complying with all of the terms of, this license or a future version of this license issued under section 6.1. For legal entities, You includes any entity which controls, is controlled by, or is under common control with You. For purposes of this definition, control means (a) the power, direct or indirect, to cause the direction or management of such entity, whether by contract or otherwise, or (b) own-
ership of more than fifty percent (50%) of the outstand-
ing shares or beneficial ownership of such entity. 2. Source Code License. 2.1. The initial developer grant. The initial developer hereby grants You a world-wide, roy-
alty-free, non-exclusive license, subject to third party intel-
lectual property claims:
a) under intellectual property rights (other than patent or trademark) licensable by initial developer to use, repro-
duce, modify, display, perform, sublicense and distrib-
ute the original code (or portions thereof) with or with-
out modifications, and/or as part of a larger work; and
(b) under patents claims infringed by the making, using or selling of original code, to make, have made, use, prac-
tice, sell, and offer for sale, and/or otherwise dispose of the original code (or portions there of). A P P E N D I X 155 APPENDIX
(c) the licenses granted in this section 2.1(a) and (b) are effective on the date Initial developer first distributes original code under the terms of this license.
(d) Notwithstanding section 2.1(b) above, no patent license is granted: 1) for code that You delete from the original Code; 2) separate from the original code; or 3) for infringements caused by: i) the modification of the original code or ii) the combination of the original code with other software or devices. 2.2. Contributor Grant. Subject to third party intellectual property claims, each contributor hereby grants You a world-wide, royalty-free, non-exclusive license
(a) under intellectual property rights (other than patent or trademark) licensable by contributor, to use, reproduce, modify, display, perform, sublicense and distribute the modifications created by such contribu-
tor (or portions thereof) either on an unmodified basis, with other modifications, as covered code and/or as part of a larger work; and
(b) under patent claims infringed by the making, using, or selling of modifications made by that contributor either alone and/or in combination with its contributor version (or portions of such combination), to make, use, sell, offer for sale, have made, and/or otherwise dispose of: 1) modifications made by that contributor
(or portions thereof); and 2) the combination of mod-
ifications made by that contributor with its contributor version (or portions of such combination).
(c) the licenses granted in sections 2.2(a) and 2.2(b) are effective on the date contributor first makes commer-
cial use of the covered code.
(d) Notwithstanding section 2.2(b) above, no patent license is granted: 1) for any code that contributor has deleted from the contributor version; 2) separate from the contributor version; 3) for infringements caused by: i) third party modifications of contributor version or ii) the combination of modifications made by that contributor with other software (except as part of the contributor version) or other devices; or 4) under patent claims infringed by covered code in the absence of modifications made by that contributor. 3. Distribution Obligations. 3.1. Application of license. The modifications which You create or to which you con-
tribute are governed by the terms of this license, including without limitation section 2.2. The source code version of covered code may be distributed only under the terms of this license or a future version of this license released under section 6.1, and you must include a copy of this license with every copy of the source code you distribute. You may not offer or impose any terms on any source code version that alters or restricts the applicable version of this license or the recipients' rights hereunder. However, you may include an additional document offering the additional rights described in section 3.5. 3.2. Availability of source code. Any modification which you create or to which you con-
tribute must be made available in source code form under the terms of this license either on the same media as an executable version or via an accepted electronic distribu-
tion mechanism to anyone to whom you made an exe-
cutable version available; and if made available via elec-
tronic distribution mechanism, must remain available for at least twelve (12) months after the date it initially became available, or at least six (6) months after a subsequent version of that particular modification has been made available to such recipients. You are responsible for ensur-
ing that the source code version remains available even if the electronic distribution mechanism is maintained by a third party. 3.3. Description of modifications. 3.4. You must cause all covered code to which you contribute to contain a file documenting the changes You made to create that covered code and the date of any change. You must include a prominent statement that the modification is derived, directly or indirectly, from original code provided by the initial developer and including the name of the initial developer in (a) the source code, and (b) in any notice in an executable version or related documentation in which you describe the origin or ownership of the covered code. Intellectual property matters
(a) Third party claims. If contributor has knowledge that a license under a third party's intellectual property rights is required to exercise the rights granted by such contributor under sections 2.1 or 2.2, contributor must include a text file with the source code distribution titled "LEGAL" which describes the claim and the party making the claim in sufficient detail that a recipient will know whom to contact. If contributor obtains such knowledge after the modification is made available as described in section 3.2, contributor shall promptly modi-
fy the LEGAL file in all copies contributor makes available thereafter and shall take other steps (such as notifying appropriate mailing lists or newsgroups) reasonably calcu-
lated to inform those who received the covered code that new knowledge has been obtained.
(b) Contributor APIs. If contributor's modifications include an application programming interface and contributor has knowledge of patent licenses which are reasonably necessary to implement that API, contributor must also include this information in the LEGAL file. A P P E N D I X 156
(c) Representations. contributor represents that, except as disclosed pursuant to section 3.4(a) above, contributor believes that contributor's modifications are contributor's original creation(s) and/or contributor has sufficient rights to grant the rights conveyed by this license. 3.7. Larger works. You may create a larger work by combining covered code with other code not governed by the terms of this license and distribute the larger work as a single product. In such a case, you must make sure the requirements of this license are fulfilled for the covered code. 3.5. Required notices. 4. Inability to comply due to statute or regulation. You must duplicate the notice in exhibit A in each file of the source code. If it is not possible to put such notice in a particular source code file due to its structure, then You must include such notice in a location (such as a relevant directory) where a user would be likely to look for such a notice. If You created one or more modification(s), you may add your name as a contributor to the notice described in exhibit A. you must also duplicate this license in any documentation for the source code where You describe recipients' rights or ownership rights relating to covered code. You may choose to offer, and to charge a fee for, warranty, support, indemnity or liability obligations to one or more recipients of covered code. However, you may do so only on your own behalf, and not on behalf of the Initial developer or any contributor. You must make it absolutely clear than any such warranty, support, indemni-
ty or liability obligation is offered by you alone, and You hereby agree to indemnify the Initial developer and every contributor for any liability incurred by the Initial develop-
er or such contributor as a result of warranty, support, indemnity or liability terms you offer. 3.6. Distribution of executable versions. You may distribute covered code in executable form only if the requirements of section 3.1-3.5 have been met for that covered code, and if you include a notice stating that the source code version of the covered code is available under the terms of this license, including a description of how and where you have fulfilled the obligations of section 3.2. The notice must be conspicuously included in any notice in an executable version, related documentation or collateral in which you describe recipients' rights relating to the covered code. You may distribute the executable version of covered code or ownership rights under a license of your choice, which may contain terms different from this license, provided that you are in compliance with the terms of this license and that the license for the exe-
cutable version does not attempt to limit or alter the recip-
ient's rights in the source code version from the rights set forth in this license. If you distribute the executable ver-
sion under a different license you must make it absolutely clear that any terms which differ from this license are offered by you alone, not by the Initial developer or any contributor. You hereby agree to indemnify the initial developer and every contributor for any liability incurred by the initial developer or such contributor as a result of any such terms You offer. If it is impossible for you to comply with any of the terms of this license with respect to some or all of the covered code due to statute, judicial order, or regulation then you must: (a) comply with the terms of this license to the max-
imum extent possible; and (b) describe the limitations and the code they affect. Such description must be included in the LEGAL file described in section 3.4 and must be included with all distributions of the source code. Except to the extent prohibited by statute or regulation, such description must be sufficiently detailed for a recipient of ordinary skill to be able to understand it. 5. Application of this license. This license applies to code to which the initial developer has attached the notice in exhibit A and to related covered code. 6. Versions of the license. 6.1. New versions. Netscape communications corporation (Netscape) may publish revised and/or new versions of the license from time to time. Each version will be given a distinguishing version number. 6.2. Effect of new versions. Once covered code has been published under a particular version of the license, you may always continue to use it under the terms of that version. You may also choose to use such covered code under the terms of any subsequent version of the license published by netscape. No one other than netscape has the right to modify the terms applicable to covered code created under this license. A P P E N D I X 6.3. Derivative works. If You create or use a modified version of this license
(which you may only do in order to apply it to code which is not already covered code governed by this license), You must (a) rename Your license so that the phrases
"Mozilla", "MOZILLAPL", "MOZPL", "Netscape", "MPL",
"NPL" or any confusingly similar phrase do not appear in your license (except to note that your license differs from this license) and (b) otherwise make it clear that Your version of the license contains terms which differ from the Mozilla Public license and netscape Public License. (Filling in the name of the initial developer, original code or con-
tributor in the notice described in exhibit A shall not of themselves be deemed to be modifications of this license.) 157 APPENDIX 7. DISCLAIMER OF WARRANTY. COVERED CODE IS PROVIDED UNDER THIS LICENSE ON AN AS IS BASIS, WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, WARRANTIES THAT THE COV-
ERED CODE IS FREE OF DEFECTS, MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE OR NON-INFRINGING. THE ENTIRE RISK AS TO THE QUALITY AND PERFOR-
MANCE OF THE COVERED CODE IS WITH YOU. SHOULD ANY COVERED CODE PROVE DEFECTIVE IN ANY RESPECT, YOU (NOT THE INITIAL DEVELOPER OR ANY OTHER CONTRIBUTOR) ASSUME THE COST OF ANY NECESSARY SERVICING, REPAIR OR CORRECTION. THIS DISCLAIMER OF WARRANTY CONSTITUTES AN ESSENTIAL PART OF THIS LICENSE. NO USE OF ANY COVERED CODE IS AUTHORIZED HEREUNDER EXCEPT UNDER THIS DISCLAIMER. 8. TERMINATION. 8.1. This license and the rights granted hereunder will terminate automatically if you fail to comply with terms herein and fail to cure such breach within 30 days of becoming aware of the breach. All sublicenses to the covered code which are properly granted shall survive any termination of this license. Provisions which, by their nature, must remain in effect beyond the termination of this license shall survive. 8.2. If you initiate litigation by asserting a patent infringement claim (excluding declatory judgment actions) against ini-
tial developer or a contributor (the initial developer or contributor against whom you file such action is referred to as Participant) alleging that:
(a) such participant's contributor version directly or indi-
rectly infringes any patent, then any and all rights granted by such participant to you under sections 2.1 and/or 2.2 of this license shall, upon 60 days notice from Participant terminate prospectively, unless if within 60 days after receipt of notice you either: (i) agree in writing to pay participant a mutually agreeable reasonable royalty for your past and future use of modifications made by such participant, or (ii) withdraw your litigation claim with respect to the contributor version against such participant. If within 60 days of notice, a reasonable royalty and payment arrangement are not mutually agreed upon in writing by the parties or the litigation claim is not withdrawn, the rights granted by partici-
pant to you under sections 2.1 and/or 2.2 automati-
cally terminate at the expiration of the 60 day notice period specified above.
(b) any software, hardware, or device, other than such par-
ticipant's contributor Version, directly or indirectly infringes any patent, then any rights granted to You by such participant under sections 2.1(b) and 2.2(b) are revoked effective as of the date you first made, used, sold, distributed, or had made, modifications made by that participant. 8.3. If you assert a patent infringement claim against partici-
pant alleging that such participant's contributor version directly or indirectly infringes any patent where such claim is resolved (such as by license or settlement) prior to the initiation of patent infringement litigation, then the rea-
sonable value of the licenses granted by such participant under sections 2.1 or 2.2 shall be taken into account in determining the amount or value of any payment or license. 8.4. In the event of termination under sections 8.1 or 8.2 above, all end user license agreements (excluding distributors and resellers) which have been validly granted by you or any distributor hereunder prior to termination shall survive termination. 9. LIMITATION OF LIABILITY. UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL THEORY, WHETHER TORT (INCLUDING NEGLIGENCE), CONTRACT, OR OTHERWISE, SHALL YOU, THE INITIAL DEVELOPER, ANY OTHER CONTRIBUTOR, OR ANY DIS-
TRIBUTOR OF COVERED CODE,OR ANY SUPPLIER OF ANY OF SUCH PARTIES, BE LIABLE TO ANY PERSON FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUEN-
TIAL DAMAGES OF ANY CHARACTER INCLUDING, WITH-
OUT LIMITATION, DAMAGES FOR LOSS OF GOODWILL, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNC-
TION, OR ANY AND ALL OTHER COMMERCIAL DAM-
AGES OR LOSSES, EVEN IF SUCH PARTY SHALL HAVE BEEN INFORMED OF THE POSSIBILITY OF SUCH DAM-
AGES. THIS LIMITATION OF LIABILITY SHALL NOT APPLY TO LIABILITY FOR DEATH OR PERSONAL INJURY RESULT-
ING FROM SUCH PARTY'S NEGLIGENCE TO THE EXTENT APPLICABLE LAW PROHIBITS SUCH LIMITATION. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAM-
AGES, SO THIS EXCLUSION AND LIMITATION MAY NOT APPLY TO YOU. 10. U.S. GOVERNMENT END USERS. The covered code is a "commercial item," as that term is defined in 48 C.F.R. 2.101 (Oct. 1995), consisting of
"commercial computer software" and "commercial computer software documentation," as such terms are used in 48 C.F.R. 12.212 (Sept. 1995). Consistent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.7202-4
(June 1995), all U.S. Government end users acquire cov-
ered code with only those rights set forth herein. A P P E N D I X 158 11. MISCELLANEOUS. EXHIBIT A -Mozilla Public License. This license represents the complete agreement concerning subject matter hereof. If any provision of this license is held to be unenforceable, such provision shall be reformed only to the extent necessary to make it enforceable. This License shall be governed by California law provisions
(except to the extent applicable law, if any, provides oth-
erwise), excluding its conflict-of-law provisions. With respect to disputes in which at least one party is a citizen of, or an entity chartered or registered to do business in the united states of america, any litigation relating to this License shall be subject to the jurisdiction of the federal courts of the northern district of california, with venue lying in santa clara county, california, with the losing party responsible for costs, including without limitation, court costs and reasonable attorneys' fees and expenses. The application of the united nations convention on contracts for the International sale of goods is expressly excluded. Any law or regulation which provides that the language of a contract shall be construed against the drafter shall not apply to this license. 12. RESPONSIBILITY FOR CLAIMS. As between initial developer and the contributors, each party is responsible for claims and damages arising, directly or indirectly, out of its utilization of rights under this license and you agree to work with initial developer and contributors to distribute such responsibility on an equitable basis. Nothing herein is intended or shall be deemed to constitute any admission of liability. 13. MULTIPLE-LICENSED CODE. Initial developer may designate portions of the covered code as "Multiple-Licensed". "Multiple-Licensed" means that the initial developer permits you to utilize portions of the covered code under your choice of the NPL or the alternative licenses, if any, specified by the initial developer in the file described in exhibit A. The contents of this file are subject to the Mozilla Public License Version 1.1 (the license); you may not use this file except in compliance with the License. You may obtain a copy of the license at http://www.mozilla.org/MPL/
Software distributed under the license is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See the license for the specific language governing rights and limitations under the License. The Original Code is ______________________________________. Initial Developer The is___________________. Portions created by ______________________ are Copyright (C) _______________________. All Rights Reserved. the Original Code of Contributor(s): ______________________________________. Alternatively, the contents of this file may be used under the terms of the _____ license (the "[___] License"), in which case the provisions of [______] license are applicable instead of those above. If you wish to allow use of your version of this file only under the terms of the [____] license and not to allow others to use your version of this file under the MPL, indicate your decision by deleting the provisions above and replace them with the notice and other provisions required by the [___] license. If you do not delete the provisions above, a recipient may use your version of this file under either the MPL or the [___] license."
NOTE: The text of this exhibit A may differ slightly from the text of the notices in the source code files of the original code. You should use the text of this exhibit A rather than the text found in the original code/source code for Your modifications. A P P E N D I X 159
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2009-03-30 | JBP - Part 15 Class B Computing Device Peripheral | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2009-03-30
|
||||
1 | Applicant's complete, legal business name |
LG Electronics USA
|
||||
1 | FCC Registration Number (FRN) |
0020917688
|
||||
1 | Physical Address |
1000 Sylvan Avenue
|
||||
1 |
Englewood Cliffs, New Jersey 07632
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
m******@ccsemc.com
|
||||
1 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
BEJ
|
||||
1 | Equipment Product Code |
60PS80UA
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
K****** H******
|
||||
1 | Title |
Director, Standards & Compliance
|
||||
1 | Telephone Number |
201-4********
|
||||
1 | Fax Number |
201-8********
|
||||
1 |
k******@lge.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 05/14/2009 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | JBP - Part 15 Class B Computing Device Peripheral | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | PLASMA TV/MONITOR | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
ESTECH Co., Ltd.
|
||||
1 | Name |
Y****** J****
|
||||
1 | Telephone Number |
82-31********
|
||||
1 | Fax Number |
82-31********
|
||||
1 |
j******@estech.co.kr
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15B | 16 19 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC