FCC ID: BEJLAN5800WR0 RADIO - CAR

 

User precautions . GB.3 General information . GB.5 General description . GB.5 Introduction to the controls . GB.8 Switch on/off . GB.13 Operate and use . GB.14 Volume . GB.17 Radio/AUX . GB.18 Listen to the radio . GB.18 Auxiliary audio sources . GB.22 Audio setting . GB.25 Navigation . GB.27 The navigation system . GB.27 Reading a map . GB.28 Enter a destination . GB.31 Guidance . GB.37 Map settings . GB.43 Managing the favourites . GB.44 Navigation settings . GB.46 Eco driving . GB.50 Bluetooth device . GB.51 Pairing/unpairing Bluetooth devices . GB.51 Connecting/disconnecting Bluetooth devices . GB.54 Using voice recognition . GB.56 Phonebook . GB.60 Making, receiving a call . GB.61 Remote engine start-up . GB.64 Reversing camera . GB.67 System settings . GB.69 Updating the system . GB.72 GB.1 Operating faults . GB.76 GB.2 Precautions during use (1/2) It is essential to follow the precautions below when using the system, both in the interest of safety and to prevent material damage. You must always comply with the laws of the country in which you are travelling. Precautions when operating the system Operate the controls (on the dash or near the steering wheel) and read the information on the screen only when road conditions allow. Set the volume to a reasonable level so that outside noise can be heard. Precautions regarding navigation Use of the navigation system does not in any way replace the responsibility or vigilance of the driver when driving the vehi-

cle. Depending on the geographical area, the map may not have the latest information on new roads. Be alert. In all cases, Road Traffic Regulations and road signs always take precedence over the directions of the navigation system. Precautions concerning the equipment Do not attempt to dismantle or modify the system, as there is a risk of damage to equipment and fire. Contact a representative of the manufacturer in the event of malfunction and for all operations involving disassembly. Do not insert foreign bodies into the player. Do not use products containing alcohol and/or spray fluids on the area. Precautions when using the phone There are laws which govern the use of phones in vehicles. They do not necessarily authorise the use of hands-free phone systems under all driving conditions: drivers must be in control of their vehicles at all times;

Using a phone whilst driving is a significant distraction and risk factor during all stages of use (dialling, communicating, searching for a number in the handset memory, etc.). GB.3 Precautions during use (2/2) The description of the models given in this manual is based on the specifications at the time of writing. this manual covers all existing functions for the models described. Whether or not they are fitted depends on the equipment model, op-

tions selected and the country where they are sold. this manual may also contain information about functions to be introduced later in the model year. Depending on the make and model of your telephone, some functions may be partially or completely incompatible with your vehicles multimedia system. For more details, please consult an Authorised Dealer. GB.4 generaL descriPtion (1/3) introduction Your vehicles multimedia system per-

forms the following functions:

RDS radio;

DAB radio;

management of auxiliary audio sources;

Hands-free phone;

voice recognition;

navigation assistance;

road traffic information (TMC);

information on areas for particular care;

parking distance control (reversing camera);

remote engine start-up program-

ming;

information on your driving style and driving advice in order to optimise your fuel consumption. radio functions The multimedia system can be used to listen to FM (frequency modulation), DAB (digital audio) and AM(amplitude modulation) radio. The DAB system allows better sound reproduction and access to text infor-

mation about the current programme etc. The RDS system makes it possible to display the name of some stations or messages sent by FM stations to be displayed:

general traffic information (TA);

emergency message(s). auxiliary audio function You can listen to your personal stereo directly through your vehicles speak-

ers. There are several ways of connect-

ing your personal stereo, depending on the type of device you have:

3.5 mm Jack socket;

USB audio;

Bluetooth connection. For more information on the list of com-

patible devices, please contact an au-

thorised dealer or visit the manufactur-

ers website if available. GB.5 generaL descriPtion (2/3) Hands-free phone function The Bluetooth hands-free system provides the following features without having to handle your phone:

send/receive/suspend a call;

consult the list of contacts from the phone memory;

access the call logs for calls which have come through the system;

dial emergency numbers. telephone compatibility Some phones are not compatible with the hands-free system, and do not enable you to use all of the available functions or do not provide the best possible sound quality. For more information on compatible phones, contact an authorised dealer or visit the manufacturers website if available. remote engine start-up function When fitted, this function lets you pro-

gramme the engine to start remotely, in order to heat or ventilate the passen-

ger compartment up to 24 hours before using the vehicle. driving eco2 The Driving eco menu displays a real-time overall score that reflects your driving style. navigation assistance function The navigation system automatically calculates the geographical position of the vehicle by receiving GPS signals. It suggests a route to your chosen des-

tination using its road map. Finally, it in-

dicates the route to take, step by step, using the display screen and voice messages. tMc traffic information This function keeps you informed about traffic conditions in real time. road safety alerts or alert points This service allows you to receive alerts in real time, such as excess speed alerts or the position of road safety alert areas. Your hands-free phone system is only intended to facilitate communication by reducing the risk factors, without remov-

ing them completely. You must always comply with the laws of the country in which you are travelling. GB.6 generaL descriPtion (3/3) 1 2 3 4 5 8 Dark 10 11 Player List Presets Options Set Time Destination Radio Media Phone Driving eco2 Nav Setting 6 7 displays Menu screen 1 Mode selection area:

displays the selected mode;

when the mode selection area is touched, a drop-down menu will appear. 2 Area Table of Contents:

shows the contents of a menu item and related information. 3 Telephone information area:

if the Bluetooth system is acti-

vated, the reception and battery level of the connected device will be dis-

played. 9 4 Exterior temperature. 5 Time area. 6 Menu area:

display subordinate menu of shows current menu as high-

mode;

lighted. 7 Area Home or return to navigation. Depending on the mode you are in, this area displays:

the Home button: returns you to the welcome screen;

the Back button: goes back to the the Flag button: goes back to the previous screen;

navigation screen. 14 13 12 15 8 Mode standby and clock display 9 Area for selecting programmed engine start-up navigation screen 10 Map mode (2D/3D and 2D North). 11Name of the next street to take on your route. 12 Current audio information. 13 Options for route and map setting. 14 Voice guidance On/Off. 15 Traffic information (TMC). GB.7 introduction to tHe controLs (1/5) system panels Screen selections are made by touching the desired selection on the screen. 1 2 3 4 Destination 10 9 8 7 6 5 Destination 10 9 8 7 6 5 GB.8 1 2 3 4 introduction to tHe controLs (2/5) steering column controls a 11 B 12 11 12 c 17 18 13 14 16 15 16 15 d 17 18 e 17 18 13 12 14 16 19 16 19 13 14 13 12 14 16 13 12 14 GB.9 introduction to tHe controLs (3/5) steering wheel controls 20 20 12 13 14 21 11 15 GB.10 introduction to tHe controLs (4/5) Function 1 Brief press: standby screen ON/OFF. 2, 13, 14 Adjust the volume. 3 4 5 6 7 8 9 10 11 USB. connection 3.5 mm Jack socket. Access the media currently playing (FM/AM/DAB/USB/iPod/Bluetooth/AUX). Access the Navigation menu. Access the Home menu. Telephones or auxiliary sources: exit the current window to return to the navigation screen (current) or to the previ-

ous screen. Mute/unmute the voice guidance. Change the map zoom. Change the map view mode (2D/3D/2D North). Choose audio source (FM/AM/DAB/USB/iPod/Bluetooth/AUX). GB.11 introduction to tHe controLs (5/5) Function 12 When receiving a call:

Brief press: answer the call;

Long press: reject the call. Brief press during a call: end call. Listening to an audio source: mute/unmute (only for controls C, D and E). Brief press: access Phone menu (only for controls A and B). Long press: activate/deactivate multimedia system voice recognition (only for control A). 13+14 Mute/unmute (only for controls A and B). 15, 19 Radio: change radio station play mode (Main, List, Presets). Media (USB / iPod): change play mode for the media currently playing (Main or List). Rear dial:

Radio: change radio mode (preset/list/frequency). Media: previous/next track. Brief press: confirm an action (only for control C) Change media (CD/USB/AUX). Change radio mode (FM/AM/DAB);

long press: activate/deactivate multimedia system voice recognition. Brief press: activate/deactivate multimedia system voice recognition. Long press: activate/deactivate voice recognition for your phone if it is connected to the multimedia system. Listening to an audio source: mute/unmute. 16 17 18 20 21 GB.12 on/oFF sWitcH a a switching on The multimedia system switches on au-

tomatically when the ignition is switched on. In other cases, press button A to switch on the multimedia system. With the ignition off, you can use the system for twenty minutes. Press A to make the multimedia system operate for around a further twenty min-

utes. switching off The system switches off automatically when the vehicles ignition is switched off. standby screen The standby clock mode allows the dis-

play screen to be switched off. When in standby clock mode, the radio or guidance system does not operate. The standby screen displays the time and exterior temperature. Briefly press A to activate/deactivate the standby screen. GB.13 oPerate and use (1/3) 1 1 fast-forward or rewind (Media play-

ing screen). From the Media > Player menu, pressing and holding the Fast forward/

rewind button fast forwards/rewinds the track playing. Press and Hold (long press):

saving an item (radio station for ex-

ample). From the Radio > Main menu, press-

ing and holding the preset number stores the radio station currently play-

ing. Fast scroll. When touching with long presses the list down buttons, scroll (per page) with acceleration. touchscreen 1 tap (short press):

Item selection;

Item execution (Media playing screen). From the Media > Player menu, pressing the next button switches to the next title. GB.14 oPerate and use (2/3) Route settings Route planning method Fast Short Eco Motorways Period Charge Per-use Toll Off Off Off On On On Options 2 3 return to the Home menu. The system goes directly to the Home menu if you press and hold 2 or briefly press 3 wherever you are in the system. Player List Presets Options 4 a 6 5 audio: using the steering column controls Press button 5 to change the radio sta-

tion search mode. Rotate wheel 6 to change the station

(movement A). Press 4 to change the source

(USB, AUX, AM, FM, DAB, iPod and Bluetooth). GB.15 oPerate and use (3/3) 7 8 Press 9 to use numbers or symbols. Press 10 to change the keyboard con-

figuration. Options 10 9 using an alphabetical keyboard When entering a heading using an al-

phabetical keyboard, choose each letter using the keypad. When choosing each letter, the system will remove the brightness of certain let-

ters to help entering them. Press 7 to delete the last character en-

tered. Press 8 to display the list of results. GB.16 VoLuMe Volume Adjust the sound level when listening to the different sources, messages, ring-

tones and phone communications:

by turning or pressing button 1 on the front panel of the multimedia system;

by pressing control 13 or 14 on the steering column control. To adjust this function, please refer to the information on Audio preferences in the section on Audio settings. The radio source being listened to is in-

terrupted when TA traffic information, news bulletins or a warning message is received. Set the volume to a reason-

able level so that outside noise can be heard. Mute To mute the sound, briefly press button 21 on the steering wheel con-

trol or 12 on the steering column con-

trol (only for controls C, D and E) or si-

multaneously press buttons 13 and 14 on the steering column control (only for controls A and B). The MUTE icon is displayed at the top of the screen to indicate that the sound is switched off. To continue listening to the current audio source, briefly press button 21 on the steering wheel control or 12 on the steering column control (only for controls C, D and E) or simutaneously press buttons 13 and 14 on the steer-

ing column control (only for controls A and B). This function is deactivated automati-

cally when the volume control is used or when a news or road traffic bulletin is broadcast. Volume adjustment according to speed When this function is activated, the audio and navigation volume will vary according to the vehicle speed. To activate and adjust this function, please refer to the information on Speed dependent volume control of the section on Audio settings. GB.17 Listening to tHe radio (1/4) 1 2 Main List Presets Options 7 5 3 6 9 8 4 10 selecting a wavelength To choose a waveband:

press 1;

choose the waveband FM, AM or DAB by pressing on the required band. choose a radio station FM, aM or daB. There are different modes for choosing a radio station. After having selected the wavelength, select the mode by pressing tabs 5, 6 or 7. Three search modes are available:

Main mode (tab 7);

List mode (tab 6);

Presets mode (tab 5). These modes can be changed using the steering column control. note: the 2 marker indicates the posi-

tion in your saved list of the radio sta-

tion currently playing. Main mode This mode allows stations to be searched for either manually or au-

tomatically by scanning the se-

lected range of frequencies. Select Frequency mode by pressing 7. To scan the frequency range:

manually run through the frequen-

cies in steps by repeatedly press-

ing 4 or 8;

automatically go to the next station by pressing 3 or 9;

Repeat the operation each time the search stops if necessary. You can also move the control knob on the steering column control to move to the next station. note: to go back to the welcome screen, press the 10 button. GB.18 Listening to tHe radio (2/4) 11 12 13 15 16 17 a Main List Presets Options Main List Presets Options 14 10 18 List mode Select List mode by pressing 14. This operating mode allows you to find a station easily by name from an alpha-

betical list (on FM and DAB only). Select the station required by pressing zone 12. Press 13 to scroll through all the sta-

tions. note: the 11 symbol indicates the sta-

tion you are currently listening to. The names of the radio stations that do not use RDS will not appear on the screen. Only their frequency is dis-

played and sorted at the end of the list. Presets mode Select Presets mode by pressing 18. This mode allows you to recall on demand those stations which you have already stored (refer to information on Saving a station in this section). Press one of the buttons in zone A to choose the saved stations. note: to go back to the welcome screen, press the 10 button. storing a station Select a radio station by using one of the modes described above. Press and hold one of the buttons on the zone A. You can save up to twelve stations per waveband. note: the 15 symbol indicates the sta-

tion you are currently listening to. Marker 16 indicates the number of pages in this section. To move to the next page, press button 17. GB.19 Listening to tHe radio (3/4) rds Some FM and DAB radio stations broadcast text information relating to the programme being listened to (the name of a track, for example). note: This information is only available for certain radio stations. ta (traffic information) When this feature is activated, your multimedia system looks for and plays traffic bulletins automatically as new re-

ports are issued by some radio stations FM and DAB. note: The automatic broadcasting of traffic information is deactivated when the audio system is set to the AM band. Traffic information is broadcast au-

tomatically and has priority over the source being listened to at the time. Select On to activate this function or Off to deactivate it. RDS TA Region News Off Off Off Off On On On On Main List Presets Options 19 radio settings Display the settings menu by press-

ing 19. You can activate or deactivate functions by pressing On or Off (the setting menu varies depending on the waveband). The available functions are as follows:

RDS;

TA (traffic information);

Region;

News;

AM;

DLS;

Announcement;

Update List. GB.20 news When this function is activated, it is possible to automatically listen to news as it is broadcast by certain FM or DAB radio stations. If you then select the other sources, when a broadcast of the selected pro-

gramme type is made, it will interrupt the other sources. Select On to activate this function or Off to deactivate it. Listening to tHe radio (4/4) region The frequency of an FM radio station may change depending on the geo-

graphical area. In order to keep listening to the same radio station when changing region, ac-

tivate the Region function so that your multimedia system can automatically retune the frequency. note: this is only available for certain radio stations. note: Region is available only if the RDS function is activated. Poor reception can sometimes cause erratic and annoying changes in fre-

quency. In this case you should deac-

tivate this function. Select On to activate this function or Off to deactivate it. aM You can activate or deactivate the AM band. Select On to activate this function or Off to deactivate it. dLs Some radio stations broadcast text in-

formation relating to the programme being aired (the title of a track, for ex-

ample). update List To update the list of stations and obtain the most recent ones, press Start. note: preferably update the DAB list as soon as your system is switched on. GB.21 AUX: 3.5 mm jack. In navigation mode or when listen-

ing to the radio, select your auxiliary audio source by pressing Home, then Media. The system starts playing the last audio track played. auxiLiary audio sources (1/3) Your system has two types of auxiliary inputs:

for connecting an external audio source (MP3 player, portable music player, USB key, phone, etc). with Bluetooth (Bluetooth audio 1 player, Bluetooth phone). To find the input position, please refer to the section on Introduction to the controls. operating and connection principles There are two types of connections:

a USB socket;

a Jack socket. Connect your portable audio player, de-

pending on the type of device. Once you have connected a USB socket or jack, the system automati-

cally detects the auxiliary source. note: The USB key used must be for-

matted to FAT32 format and have a maximum capacity of 32Gb. Main List Options selecting an auxiliary source To select an input source, press 1. A list of available input sources is dis-

played instantly:

USB: USB key, MP3 reader, phone, etc.;

iPod: device with integrated iPod;

BT: Bluetooth devices;

Only handle the portable audio player when traffic conditions permit. Store the portable audio player safely while driving (risk of being thrown in the event of sudden braking). GB.22 auxiLiary audio sources (2/3) 1 2 Player List Options 3 audio formats Auxiliary audio source formats can be MP3 and WMA. Fast winding Long press 2 to fast forward or rewind. Playback resumes when the button is released. repeat This function enables you to repeat one or all tracks. Press 3, then Off, Track, Folder or All. shuffle This function lets you play all songs in shuffle mode. Press 3 and then press On or Off. auxiliary input: usB socket, Bluetooth connection: usB and portable digital audio player Connect the socket of your portable audio player to the USB input on the unit. Once the USB socket of the digital por-

table audio player is connected, the USB menu is displayed. note: Some types of portable digital player may not be able to be connected. charging with the usB port Once your players USB socket is connected to the USB port of the unit, you can charge or maintain the battery during use. note: some devices do not recharge or maintain battery charge level when they are connected to the USB port on the multimedia system. connection: iPod Connect the socket of your iPod to the USB input on the unit. Once the USB socket of your iPod is connected, the iPod menu is displayed. use Select iPod from the drop-down list 1, then press on the playback list or the desired audio track on the multimedia system screen. All audio tracks on your iPod can be selected directly on the multimedia system screen. note: Once connected, you will no longer be able to control the audio di-

rectly from your iPod. You must use the keys on the systems front panel. note: Use the iPod cable for exclu-

sive use of an iPod when connecting an iPod to the USB socket. GB.23 auxiLiary audio sources (3/3) connection: Bluetooth Refer to the section on Connecting/

disconnecting Bluetooth devices. Once the Bluetooth is connected, the BT menu is displayed. 4 use Select BT from the drop-down list 4, then press on the playback list or the desired audio track on the multimedia system screen. All the audio tracks on your Bluetooth device can be selected directly from the multimedia system screen. note: Once connected, you can no longer directly control your portable dig-

ital audio player. You must use the keys on the systems front panel. a Main List Options 5 selecting a track To select an audio track within a folder, press List, then select a track A from this list. To go back to the previous level in the folder hierarchy, press 5. By default, albums are listed in alpha-

betical order. Depending on the type of digital port-

able audio player, you can refine your selection by using folders or files. note: Use a USB connection in prefer-

ence for easier music searches. auxiliary input: jack connection Connect the jack of your portable audio player to the jack input. use Select AUX from the drop-down list 4, then select the desired track on your music player. No indication of the name of the artist or the track is displayed on the systems screen. Select tracks directly on your portable player when the vehicle is stationary. The sound quality from the ana-

logue input (AUX) will usually be lower than the sound quality from digital inputs (USB, Bluetooth). GB.24 Loudness Press On or Off to activate/deacti-

vate the loudness function, which ac-

centuates the bass and treble. Volume adjustment according to speed (Vol/speed) When the speed of your vehicle is more than (40 km/h) 25 mph, the volume level outputs higher than original volume level. Adjust the volume/speed ratio by press-

ing one of the buttons in zone 1. You can deactivate this function by pressing Off. audio settings (1/2) 1 Audio Settings Vol/Speed Loudness BAL/FAD Sound Off Off On Audio Display Bluetooth System 3 2 Display the settings menu by pressing Home > Setting. Press 2 to access the audio settings. You can leave the settings menu and return to the welcome page by press-

ing 3. GB.25 audio settings (2/2) 4 BAL/FAD 5 OK Bass +3 Mid +0 Treble -2 5 Audio Settings Vol/Speed Loudness BAL/FAD Sound Off Off On Audio AT Nav Audio Display Bluetooth System Reset to defaults 11 10 Press 12 to move to the next page. Tap 10 to go back to previous screen. 12 8 7 6 right/left and front/rear balance Tap 6 or 8 to adjust the sound the left/

right balance. Tap 4 or 7 to adjust the sound the front/

rear balance. After setting balance, press OK to confirm. Bass, Mid, treble Press the 5 arrows to adjust the bass, medium and treble. Once the adjustments have been made, press OK to confirm. 9 audio preferences Display the audio preferences menu by pressing 9. You can adjust the volume of each sound independently. Audio;

TA;

Navigation;

Phone;

Ring (telephone). To do this, press + or -. Press 11 to reset all the audio prefer-

ences. GB.26 tHe naVigation systeM the navigation system The navigation system calculates your position and guides you by using data:

of the GPS receiver;

from the digital map. gPs receiver The navigation system uses GPS

(Global Positioning System) and GLONASS satellites orbiting the Earth. The GPS receiver receives signals transmitted from several satellites. The system can then locate the position of the vehicle. note: After moving a long distance without driving (ferry, rail freight), the system may take several minutes to adjust before retuning to normal opera-

tion. Updates (especially of maps) are pu-

blished regularly. In some cases, it is possible that roads alter and that the mapping is not yet up to date. recommend note: we installing Naviextras Toolbox software on your computer and updating your system re-

gularly. the digital map The digital map contains the road maps and town maps that the system re-

quires. usB key Map To install the most recent version, please refer to the section on Map up-

dates. note: The USB key is not provided with the system. note: The USB key used must be for-

matted to FAT32 format and have a maximum capacity of 32Gb. If possible, always use the most recent version. insert usB key Insert the USB key into the port USB 1 on the front panel of the multimedia system. 1 1 GB.27 read a MaP (1/3) 1 2 3 4 5 6 7 8 Options OK Destination 14 13 12 11 10 9 Map key 4 Navigation display options. 5 Access different display modes:

3D mode;

2D mode;

2D North mode (the top of the map always faces north). 6 Name of the next major road or road sign information. 7 Route calculated by the navigation system. 8 Distance to and direction of next change of direction. 3 displaying the map To display the map around the current vehicle position, press Home > Nav. Touch the map screen. To move around the navigation map, drag the desired direction on the screen. Press 1 to return to your cur-

rent position. Press 3 to zoom in or out. GB.28 9 Estimated time of arrival. 10 Media currently playing. 11 Distance remaining to the destina-

12 Location of the vehicle on the navi-

tion. gation map. 13 Mute/unmute the voice guidance. 14 Traffic information. Press this area to find out about the different incidents present on your route. Position gPs This function makes it possible to find out the geographical location of the se-

lected position (Address/latitude/longi-

tude). Touch desired position on the screen. Press Options and then press News to find out the exact location of the se-

lected position. Map icons The navigation system uses symbols 2 to display points of interest (POI). Refer to the information on Displaying points of interest in the section on Map set-

tings. read a MaP (2/3) Where Am I?

Country information : France Latitude N48.82995 Longitude E2.49608 Altitude 0 m Current GPS position Help Nearby Options Within Towns Countryside Fast road Motorways Phone country code : +33 Emergency number : 112 Maximum blood alcohol content: 0.5 15 Where am i?

This function allows you to check infor-

mation about the current position and to search for POI nearby. It operates when GPS is activated. Press Options on the map screen then Where Am I?. This screen includes the following infor-

mation:

Latitude;

Longitude;

Altitude;

house number;

Current address. country information Press 15 then Country Info. This function allows you to view country information depending on your current position. This screen includes the following infor-

mation:

speed limit. Speed limits are displayed for major roads. Displayed unit depends on active regional settings. If no data is available, then -- is shown instead of table and number. Phone country code;

emergency number;

legal Restrictions effective in the country:

maximum permitted blood alcohol level;

high-visibility vest required;

fire extinguisher required;

headlights must be on at all times;

spare bulbs required;

first aid kit required;

warning triangle required;

helmets required for motorcy-

clists;

snow chains required in winter;

snow chains recommended in winter;

winter tyres required in winter;

winter tyres recommended in winter. GB.29 read a MaP (3/3) Where Am I?

Help Nearby Latitude N48.82995 Longitude E2.49608 Altitude 0 m Current GPS position Help Nearby 16 Options Help nearby This function allows you to search for assistance near your current position. Press 16 to open a new screen for the quick search. Car repair Around here Police Around here Health Around here Service station Around here Information on this screen:

car repair services;

medical and emergency services;

police stations;

petrol stations. To search for a destination from this screen, please refer to the section on Entering a destination and the infor-

mation on Selecting points of interest

(POI). GB.30 entering a destination (1/6) destination menu Press Home > Nav > Destination to access the destination menu. The destination menu offers several methods to enter a destination:

enter an address (complete or par-

tial);

select an address from Points of in-

terest;

select a destination from the pre-

vious destinations;

select an address Favourites;

from the select for destination by using the map;

select a latitude and longitude. entering an address To enter an address, press 1. This item allows you to enter all or part of the address: country, town, street and house number. note: only addresses known to the system through the digital map are au-

thorised. 1 Navigation 2 Address Points of interest History Favourites Find on map Coordinate Destination Route Options Options When using for the first time:

press Country;

enter the name of the country re-

quired using the keypad. When entering the address the system will remove the brightness of certain let-

ters to help enter the address. The system may suggest several coun-

try lists by pressing 2. Select the re-

quired country in the lists. Do the same for Town/Area, Street, Cross street and Street number. note: Cross street and Street number can be activated after select-

ing Street. note: when entering the street, it is not necessary to specify the type of road

(street, avenue, boulevard, etc.). note: The system stores previous ad-

dresses in its memory. Once you have entered a destination by address, that address will be displayed when the device is next used. GB.31 entering a destination (2/6) Quick search for points of interest The quick search feature lets you quickly find a place. Press the map somewhere to search for points of interest. Depending on your position, one or more 3 points will be displayed on the screen. Press 4 and then Points of interest around cursor to show the list of points of interest with names and distance from the place selected. searching for points of interest using preset categories The preset search feature lets you quickly find the most frequently se-

lected types of places. Press Home > Nav > Destination

> Points of interest to access preset categories. Points of interest Petrol station Around here Parking Around here Restaurant Around here Custom search categories(petrol station/parking/

restaurant) If an active route exists, the points of interest Petrol station and Restaurant are searched for along the route. Point of interest Parking is searched around the destination. If there is no active route (destination is not selected), they are searched around the current position. If the current position is not avail-

able either (no GPS signal), they are searched around the last known po-

sition. 3 Options OK 4 select from the Points of interest (Poi) You can select your destination from the points of interest. You can find a place in different ways:

with the quick search feature, you can quickly find a nearby place by its name;

with the preset search feature, you can find frequently searched types of places with only a few touches of the screen;

you can search for a place by its cat-

egory. GB.32 entering a destination (3/6) Press Along Route to search along the active route, and not around a given point. This is useful when you search for a later stopover that re-

sults in a minimal detour only, such as searching for nearby petrol sta-

tions or restaurants (the result list will be ranked by the length of the neces-

sary detour). Press Around my position to search around the current position or if it is not available, around the last known position (the result list will be ordered by the distance from this position). Press Vicinity of the destination to search for a place around the desti-

nation of the active route (the result list will be ordered by the distance from the destination). Navigation 5 Address Points of interest History Favourites Find on map Coordinate Destination Route Options selecting a destination from the previous destinations Press 5 to find a destination you have previously defined. Where to find points of interest?

In a Town Along Route Around my position Vicinity of the des-

tination searching for Points of interest by category You can search for points of interest by their categories and subcategories. Press Home > Nav > Destination >

Points of interest > Custom search. Select the area around which the place should be searched for:

Press In a Town to search for a place within a selected town/suburb

(the result list will be ordered by the distance from the centre of the se-

lected city/town). GB.33 entering a destination (4/6) selecting an address from the Favourites You can find the destination to a loca-

tion stored in the Favourites. To utilize this function more effectively, we rec-

ommend that you save destinations to which you often travel in advance. Firstly, save the favourite destinations by searching for the address. Please refer to the section on Managing fa-

vourites. Press Home > Nav > Destination

> Favourites to display the list of fav-

ourite destinations. Coordinate Options OK 7 6 Options OK 8 selecting for destination by using the map This allows you search for a destination by scrolling the map. Press Home > Nav > Destination

> Find on map to select the destina-

tion on the map. Then press on the location on the map that you want to select as your destination. Point 6 is displayed;

press 7 to confirm. entering the coordinate of the destination This allows you search for a destination by entering its coordinate. Press Home > Nav > Destination >

Coordinate. You can enter the latitude and longitude values in any of the following formats:

decimal degrees; degrees and decimal minutes; or degrees, minutes and deci-

mal seconds. Press 8 and then UTM to enter the co-

ordinates in UTM format. GB.34 entering a destination (5/6) Points of interest found 11 Alternative routes Route Route settings Simulate navigation Close Options 9 sorting the list The result of searching a destination by point of interest, history and favourites can be sorted by name and distance. If an active route exists, they can be sorted by detour. Press 9 to display the map on the screen. Finding a destination by names In case of selecting a destination by point of interest, history or favourites, you can search for destination in the list by their names. Press Find and enter the name using the keypad. Options OK Options OK 10 confirming the destination There are several possible options before confirming a destination:

OK;

Options. A 10 second countdown will start. If you perform no action during this time, guid-

ance will begin automatically. oK If there is no active route (destination is not selected), press 10 to confirm the destination as a new route. If an active route exists, you can select the destination as a new route or stage. Press 10 and then press New route or Waypoint. options Before the 10 second countdown ends, the following choices will appear on the screen:

alternative routes Press 11 to change or modify the route. GB.35 entering a destination (6/6) 12 13 14 16 17 Add to Favourites Current traffic News Back to car Close 18 20 19 current traffic This function enables you to obtain in-

formation on traffic incidents over the course of your trip, or in your immediate vicinity. To access this, press 14 then select Current traffic. Alternative routes Route Route settings Simulate navigation Close Options OK 15 route Press 12 to view a breakdown of your route. Please refer to the section on Guidance. route settings Press 13 to adjust your route depending on the desired roads and route mode. simulate navigation Press 15 to view of simulation of the route you have selected. Please refer to the section on Guidance. GB.36 options at the end of the 10 second count-

down, the following choices appear on the screen:

add to favourites Press 17 to save the selected destina-

tion in your favourite destinations. current traffic Press 16 to obtain information about traffic incidents flagged on your route or in your immediate vicinity. news Press 20 to view the address, latitude, longitude and telephone number of a point of interest (only activated after se-

lecting a point of interest). Back to car Press 19 to return to the current vehicle position. note: To close the Options window, press 18. guidance (1/6) 1 3 Options OK (10) Destination Destination 4 5 2 activating guidance Press 2 or wait 10 seconds after enter-

ing a destination. Guidance will begin. note: You can interact with the map at any time by sliding it in the desired di-

rection or by pressing the screen. guidance screens The system will offer several different navigation maps. Press 3 to change the map display and open the drop-down menu. Then select one of the different displays:

2D;

3D;

2D North. You can also change the map display by pressing the compass 1 on the map. Full-screen mode (2d, 3d or 2d north) This mode allows you to view the navi-

gation map on the entire screen. The information on the arrival time and the distance remaining to the destina-

tion are indicated in 5. The indication for the next change of di-

rection is located in 4. GB.37 guidance (2/6) Traffic summary There are no events affecting your route. Significant events:

0 : 00 All delay:

Flow events:

Closure and block Accident Lane restriction Other:

0 OF 37 0 OF 16 0 OF 17 0 OF 26 0 OF 3 Event list 0 V-Trafic Options Offer detour Destination Radio 7 8 9 10 The screen gives you various events appearing on your route. The system will let you know the length of the delays caused by these incidents on your trip. Press 8 to change the event display settings. Press 10 to make a detour, 9 to access traffic options (please refer to the section on Navigation settings) or 7 to return to navigation. note: traffic information depends on your subscription and on signal recep-

tion. Motorway junction view During guidance, before each motor-

way junction, the system will display a three-dimensional view of the junction. note: for some junctions, only a small turn arrow will appear on the map. The system will switch back to normal mode after you have passed the junc-

tion. Destination 6 intersection map During guidance, before each change of direction. alternative route The system offers an alternative route in the event of an accident or heavy traffic along the planned route. Press Yes or No as required. traffic summary During guidance, you can get traffic in-

formation at any time by pressing 6. GB.38 guidance (3/6) Voice language OK 11 12 Destination Main List Presets Options 13 14 changing voice guidance language Press Home > Nav > Options >

Setting to change the language of the voice guidance. Scroll the language list by pressing 12. Select the desired language and press 11 to confirm. To set the voice guidance sound, please refer to the information on Audio pref-

erences in the section on Audio set-

tings. Listening to the radio during voice guidance While listening to a radio station during voice guidance and before each change of direction, the system will temporarily cut the sound of the radio until you pass the junction. You can access the radio station lis-

tening screen during navigation by pressing 13. To return to the naviga-

tion screen, press 14. To return to the main menu, keep 14 pressed down for around three seconds. route information This function allows you to view your route. Press Home > Nav > Route after entering a destination. Six choices will be given:

Edit route;

To avoid;

Overview;

Cancel Route;

Alternative routes;

Route. GB.39 the special points and sections of the route (e.g. toll gates, toll roads, mo-

torways, etc.);

alternative routes (e.g.: Short , Fast , Economical). Press 15 to display the following op-

tions:

Warnings;

Route settings;

Map settings;

Voice settings;

Coordinate format;

GPS";

Map Update;

Traffic. nB: for further information, please see overleaf. guidance (4/6) Navigation Warnings Route settings Map settings Voice settings Coordinate format GPS Destination Route Options 15 route overview Press Home > Nav > Route >

Overview to get a map with an over-

view of the active route. The following information will be given:

the name and/or address of the des-

tination;

The total time of the route;

The total distance of the route;

GB.40 16 17 18 19 20 simulate navigation Press Home > Nav > Route >

Overview > Options > Simulate navigation to simulate the route you will take to the destination. Start or pause the simulation by pressing 18. simulation. Press 20 to increase the speed of the You can leave the route simulation at any given moment by pressing 16. To move to the previous/next ma-

noeuvre, press 17 or 19. guidance (5/6) 21 Edit route Current GPS position Options 24 25 22 OK 23 edit route Press Home > Nav > Route > Edit route to change the route by adding, modifying or deleting steps. Press 21 to add steps and 25 to add a new destination. It offers several methods to enter a destination. see the Entering a destination section. Press 23 to delete a destination. Press 24 to reorder the list. Press 22 to change the route depar-

ture address. Length: -250 Time +0:06 Avoided section Original route New route OK 26 27 28 Alternative routes Fast a Economical;

B c Short avoidances Press Home > Nav > Route > To avoid to make a detour. Press an area of the list depending on the desired detour. To change the area, press 27. Confirm the new route by pressing 26. cancel the route At any given moment, you can stop the guidance. Press Home > Nav > Route >

Cancel Route to cancel the active route. route alternatives This section enables you to change the route planning method. Three modes are available, enabling you to change the route planning method. Fast ;

Economical;

Short . Please refer to the information on Route settings in the section entitled Navigation settings. Press Home > Nav > Route >

Alternative routes then A, B or C to confirm the new route. Tap 28 to go back to previous screen. GB.41 route settings This item enables you to choose your route settings. Please refer to the infor-

mation on Route settings in the sec-

tion entitled Navigation settings. guidance (6/6) Route - Normal Options 29 route This function makes it possible to view the route plan. Several details of the route will appear:

direction-change arrows;

road number;

distance before a fork. Press 29 to sort the route details:

by summary. Only showing the main elements of the trip (start, destination) the total distance, remaining time and arrival time. By standard description. It shows all the manoeuvres and their signpost information, route num-

bers, street name and distance. Also showing information and warnings, such as route section names entered by the driver, restrictions (access and manoeuvre restrictions), ignored user preferences, etc. By road list. Detail of the route by road names and numbers. It also shows their length, average direction and travel time information. Elements of the trip are not shown in this mode. GB.42 MaP settings Navigation 1 Warnings Route settings Map settings Voice settings Coordinate format GPS Destination Route Options 2 Map settings View mode Viewpoint Motorway view POI markers Off On 3 From the navigation menu, press 2 then 1 to access the map adjustment menu. adjusting view mode This function allows you to switch the map view between a 3D, view and a 2D top-down view, and a view with north always facing upwards. Press 3D, 2D or 2D North. adjusting viewpoint This function allows you to adjust the basic zoom and tilt levels to your needs. Press the required zoom from three available levels. Motorway View This function allows you to activate or deactivate motorway view. Press On to activate the function or Off to deactivate it. display points of interest You can select certain points of interest

(visible at 100 m scale) to be displayed on the map. To access this function directly, press 3 to display the points of interest on the map:

accommodation;

airport;

automobile;

business;

caf or bar;

etc. Press On or Off to show or hide the points of interest. Tap the name of the point of interest to open the list of its subcategories. note: in countries for which maps are not available, you can deactivate the navigation function. In Home >

Setting > System, press Off oppo-

site Navigation to deactivate the navi-

gation function. GB.43 Managing tHe FaVourites (1/2) History: please refer to the infor-

mation on Select a destination from previous destinations in the section entitled Entering a destination. Favourites: access destinations you have saved. Find on map: please refer to the information on Selecting a destina-

tion on the map in the section on Entering a destination. Coordinate: please refer to the information on Entering destina-

tion coordinates in the section on Entering a destination. Add to favourites Current traffic News Back to Car Close In all cases, once the address is con- -

firmed, the system will locate it on the map. Press Options and then press Add to favourites to add the destina-

tion to Favourites. Before saving a favourite destination, you can change its name using the dig-

ital keypad. Navigation Address Points of interest History Favourites Find on map Coordinate Destination Route Options creating an entry Press Home > Destination to access the destination menu. You have a number of methods available to enter a destination:

Address: please refer to the infor-

mation on Entering an address in the section on Entering a destina-

tion. Points of interest: please refer to the information on Selecting a point of interest (POI) in the section enti-

tled Entering a destination. GB.44 Managing tHe FaVourites (2/2) To delete all favourites, press Options and then press Delete all. Confirm this deletion by pressing Delete all. searching the favourite This function allows you to search the favourite destination in the list by name. Press Find and enter the name of the favourite destination using the digital keypad. Sort by Name Sort by distance Show All on Map Delete All Close Options Find sorting the list The result of saved favourites can be sorted by name, distance, or all shown on a map. Press Options. deleting the favourites Press the favourite you want to delete. Press Options, Delete favourite and confirm the deletion by pressing Remove. GB.45 naVigation settings (1/4) Navigation Warnings Warnings Route settings Map settings Warn when speeding Show speed limit Alert points Off Off Off On On On Voice Settings Coordinate format GPS Pre-alert distance 0 m 200 m 500 m Destination Route Options The Options tab at the bottom of the Navigation menu enables you to change the map display or the naviga-

tion settings. Warnings This item allows you to set up warnings. Warning in the event of excess speed Maps may contain information about the speed limits of the road segments. The system is able to warn you if you exceed the current limit. This information may not be available for your region, or may not be fully cor-

rect for all roads on the map. The following warning types are avail-

able:

audio warning: you receive a non-

verbal warning when you exceed the speed limit;

visual warning: the current speed limit is shown flashing in red on the map when you exceed it. Press On or Off to activate or deacti-

vate the warning. speed limit always visible Activate or deactivate the speed limit display for the section of road taken by pressing On or Off. alert point warnings When the driver crosses the increased care area, a visual warning signal ap-

pears on the screen, along with a beep. These hazardous areas are sections of road on which drivers should take extra care. They can be permanent or tem-

porary. You can activate or deactivate this function. Pre-alert distance You can choose a distance from a number of choices, to give the distance at which you wish to be notified of a ha-

zardous area. In certain countries it is illegal to download and activate the warning areas and this could lead to prose-

cution. GB.46 naVigation settings (2/4) Navigation Route Settings Warnings Route settings Map settings Voice Settings Coordinate format GPS Destination Route Options Route planning method Fast Short Eco Motorways Period Charge Per-use Toll Off Off Off On On On Options route settings This function allows you to set how routes will be calculated. route planning method This system offers three criteria for cal-

culating a route:

Fast: gives a quick route if you can travel at or near the speed limit on all roads;

Short: gives a short route to mini-

mise the distance to travel;

Eco: this mode produces a compro-

mise between fast and short routing modes. If you can save a certain dis-

tance by travelling for slightly longer time in exchange, it will do just that. The resulting route might be shorter than the fast variant, but not signifi-

cantly slower. Motorways You might need to avoid motorways when you are driving a slow car or you are towing another vehicle. Period charge You can authorise or refuse authorisa-

tion for roads requiring the purchase of special authorisation for a certain period. Per-use toll You can authorise or refuse authorisa-

tion for the use of toll roads. Ferries You can authorise or refuse authorisa-

tion for all types of ferries, boats and trains. carpool/HoV This function enables you to view roads only intended for two drivers sharing. unpaved roads You can authorise or refuse authorisa-

tion for the use of off-road tracks. GB.47 naVigation settings (3/4) Navigation Warnings Route settings Map settings Voice Settings Coordinate format GPS Destination Route Options Coordinate Format DD.DDDDD DD MM.MMM DD MM SS.S a GPS Information Available satellites : 6 Accuracy: HIGH GPS UTC time : 17:11:45 coordinate format This function allows you to change the format of coordinate. This system offers three types of format. gPs This function allows you to check the status of GPS satellites. Press GPS to see the GPS informa-

tion (screen A). Map settings Refer to the information in the section on Map settings. Voice settings This function allows you to change the language of voice guidance. Please refer to the section on Guidance in this manual. GB.48 naVigation settings (4/4) Navigation Map Update Traffic Traffic settings Traffic info Detour Event types Traffic detour settings Off On Offer detour if the calculated route saves more than:

5 minutes Confirm offered route?

Off On Destination Route Options Map update This function enables you to check the dates of your last updates. traffic This function enables you to activate or deactivate Traffic info, the flagging of different events and to manage alterna-

tive routes in the event of accidents or traffic jams. traffic info You an activate or deactivate warnings for different incidents occurring along your route. detour This function allows you to save time when an incident occurs on your trip, by offering you an alternative route. The multimedia system will offer you to choose a time after which a new route is suggested to you with a detour to save time. event types This function enables you to choose the types of events to be displayed during navigation:

All events;

Flow events;

Closure and block;

Accident;

... GB.49 driVing eco 1 Driving eco2 Driving eco2 Driving eco2 Average consumption Total consumption Average speed Dist. without consumption Acceleration a B Gear shift c Anticipation General Do not leave the engine idling, even in winter: it is cheaper and less pol-

luting to drive offas soon as you start the engine. Trip report Eco scoring Eco coaching Trip report Eco scoring Eco coaching Trip report Eco scoring Eco coaching access the driving eco menu From the main menu, press Vehicle, then Driving eco. The Driving eco menu grants access to the following information:

Trip report;

Eco scoring;

Eco coaching. trip report This menu shows you the data saved from your last journey:

Average consumption;

Total consumption;

Average speed;

Dist. without consumption. note: you can reset the data by press-

ing 1. eco scoring This menu gives you an overall mark out of 100. The higher the score, the better your eco-driving performance. GB.50 Average acceleration performance average gear change performance

(zone A);

(zone B);

average braking anticipation per-

formance (zone C). eco coaching This menu assesses your driving style and gives you the best possible advice to optimise your fuel consumption. Bluetooth Settings Pairing, unPairing BLuetootH deVices (1/3) Pairing another phone Bluetooth To use your hands-free phone system, you must pair your Bluetooth mobile to your vehicle before using it for the first time. Pairing will enable the system to rec-

ognise and store a Bluetooth phone. You can pair up to five phones, but only one can be connected at a time to the hands-free system. Pairing is carried out directly via the multimedia system or via your phone. The system and your phone must be switched on and make sure that the Bluetooth on your mobile is activated, visible and identifiable to other devices

(please refer to the instructions for your phone for further information). External device authorization Search for Bluetooth device View Bluetooth device list Change Password Bluetooth Display Audio connection;

System Pairing a Bluetooth telephone from the multimedia system Activate your phones Bluetooth press Setting > Bluetooth >

Search for Bluetooth device;

make sure your phone is activated and visible on the Bluetooth link;

select your phone from the list of de-

vices found by the system;

A message is displayed on your phone screen. Depending on the brand and model of your phone, the hands-free func-

tions may be partially or fully incom-

patible with your vehicle system. Depending on the phone, press Twin, Pair or Connect to authorise the pai-

ring. Depending on the phone, enter the code displayed on the multimedia system screen on your telephone keypad;

A second message appears on your phone screen offering to automati-

cally pair to the multimedia system for future uses. Accept this authori-

sation to avoid the need to redo all these steps. Depending on the phone, the system may prompt you to confirm the trans-

fer of the phonebook and call log to the multimedia system during pairing. Accept sharing to find this information on your multimedia system. You can also authorise automatic shar-

ing of the phonebook and call logs for the system to transfer them automati-

cally during your next pairings. note: your multimedia system memory is restricted and it is possible that all your contacts may not be imported. GB.51 Pairing, unPairing BLuetootH deVices (2/3) Your phone is now paired to your multi-

media system. note: the pairing time varies based on the brand and model of your phone. If pairing fails, redo the operation. If your phone is not visible by the system while searching for Bluetooth devices, please consult your telephone manual. Pairing a Bluetooth telephone to the multimedia system from the phone Activate the Bluetooth connection of your phone and the system;

on the Media Nav Evolution, from the main menu, press Setting >

Bluetooth > External device au-

thorization. You thereby make the system visible to other Bluetooth phones;

a message appears on the screen displaying a password and the time left during which the system remains visible;

from your telephone, display a list of available Bluetooth devices;

select the multimedia system Media Nav Evolution from the available devices during the time given, and - -

depending on the phone - enter the password displayed on the system screen on your telephone keypad. A message appears on your telephone screen to notify you that it is now paired with the Media Nav Evolution multime-

dia system. note: the pairing time varies based on the brand and model of your phone. If pairing fails, redo the operation. Your hands-free system is only intended to facilitate communication by reducing the risk factors, without re-

moving them completely. You must always comply with the laws of the country in which you are travelling. When switching on the Media Nav Evolution system, the last paired device will be automatically connec-

ted to the system. GB.52 Pairing, unPairing BLuetootH deVices (3/3) unpairing a Bluetooth phone from the Media nav evolution system Unpairing erases a phone from the hands-free system memory. From the main menu, press Setting

> Bluetooth, then View Bluetooth device list. Press the recycle bin icon 2 opposite the name of the phone you wish to delete from the list. Confirm your choice by pressing OK. Bluetooth Settings External device authorization Search for Bluetooth device View Bluetooth device list Change passkey Audio Display Bluetooth 2 Bluetooth Devices Info 2_3Gr Seungyeon_VU2 Seungyeon_3 System Options unpairing all Bluetooth phones from the Media nav evolution system You can also delete all phones pre-

viously paired from the hands-free system memory. From the main menu, press Setting > Bluetooth > View Bluetooth device list then Options and Delete all. Confirm the deletion of all paired phones by pressing OK. change passkey You can customise the four-digit pass-

word for the system authorising the pairing of Bluetooth phones. From the main menu, press Setting >

Bluetooth > Change passkey. smartphone This function available on the second page of the Bluetooth menu enables you to access assistance with acti-

vating and operating voice controls

(please refer to the section on Using voice controls). GB.53 connecting, disconnecting BLuetootH deVices (1/2) connecting a Bluetooth paired phone No phone can be connected to the hands-free phone system if it has not first been paired. Please refer to the section entitled Pairing/unpairing Bluetooth devices. Your phone must be connected to the hands-free phone system in order to use all its functions. automatic connection Once the system is switched on, the hands-free phone system will search for any paired phones present in the vi-

cinity (the search may take a minute). It automatically connects to the last connected phone if:

the Bluetooth connection of the te-

note: If a call is in progress at the time the connection is made, it is automa-

tically transferred to the vehicle spea-

kers. note: you are recommended to accept and authorise all messages which appear on your telephone while pairing with the system so that the automatic device recognition operates smoothly. Manual connection From the main menu, carry out the fol-

lowing operations:

press Phone;

press View Bluetooth device list;

select the name of the telephone to Your telephone is connected to the mul-

timedia system. which you wish to connect. lephone has been activated;

connection failure If connection fails, check that:

your device is switched on;

the device is configured to accept the systems automatic connection request;

your device battery is not flat;

your device has been paired to the hands-free system;

the Bluetooth for your device and the system are activated. note: Using your hands-free system for prolonged periods of time will discharge your devices battery more quickly. at the time of pairing, you previously authorised automatic connection for your telephone to the system. GB.54 connecting, disconnecting BLuetootH deVices (2/2) changing a connected telephone You can connect or disconnect a Bluetooth device at any time. From the main menu, press Media device, then Settings and List of de-

vices. Select the device to be connected and confirm by pressing OK. A small marker 1 will appear opposite your telephone name to indicate that the connection has been made. 1 Bluetooth Devices Options Seungyeon_VU2 Seungyeon_3 Info 2_3Gr disconnecting a connected telephone To disconnect a telephone from Media Nav Evolution, press the name of your device. The small marker 1 will disap-

pear. If a call is in progress when the phone is disconnected, the call will automatically switch to your phone. GB.55 using Voice recognition (1/4) introduction Your multimedia system has a voice recognition system which allows voice control of some functions and appli-

cations of the multimedia system and your phone. This enables you to use your multimedia system or your phone while keeping your hands on the steer-

ing wheel. note: the position of the voice recog-

nition button varies depending on the vehicle (steering wheel or column con-

trols). note: When using voice recognition, the language set on your telephone will be the language used by your system. Destination 1 activation of the multimedia system's voice recognition You can use voice control to call a con-

tact in your phonebook, enter a desti-

nation, change radio station etc without touching the screen. Briefly press voice recognition button on the steering wheel control or press and hold voice recognition button on the steering column control and follow the audio and visual instructions provided by the multimedia system. usage during navigation You can use voice recognition during navigation. Location 1 indicates that voice recognition is activated. note: when you use voice controls during navigation, the audio source currently being played is substituted by voice recognition for the length of its usage. deactivation Briefly press the voice recognition button on the steering wheel control or press and hold the voice recognition button on the steering column control. An audible signal indicates that voice recognition is deactivated. GB.56 using Voice recognition (2/4) activating the phone's voice recognition with the multimedia system To activate your phones voice recogni-

tion system you should:

get a 3G, 4G or Wifi connection with your smartphone;

Bluetooth Devices Info 2_3Gr 2 a Smartphone activate Bluetooth on your smart-

phone and make it visible to other devices (please refer to your te-

lephone manual for instructions);

pair and connect your smartphone to the multimedia system (please refer to the section on Pairing, unpairing Bluetooth devices);

note: the symbol 2 in the Settings >

Bluetooth > View Bluetooth device list menu indicates that voice recogni-

tion on your smartphone is compatible with your multimedia system. Options Cancel Press and hold voice recognition button on the steering wheel con-

trol A beep sounds and the display on screen A indicates that voice recogni-

tion is activated. Speak loudly and clearly. note: your smartphones voice recog-

nition system only enables you to use certain functions of your telephone. It does not enable you to interact with the other functions of your multimedia system such as the radio, the Driving eco2 etc. GB.57 using Voice recognition (3/4) 5 Dark Dark Radio Media Smartphone Smartphone Voice Recognition not supported on this Bluetooth device Driving eco 2 Nav Setting OK Set Time To return to screen B press 5 in the main menu of your multimedia system. deactivation Press and hold button 3 on the B screen or press and hold voice recogni-

tion button on the steering wheel control. An audible signal indicates that voice recognition is deactivated. note: a message is displayed on the multimedia system using if your smart-

phone does not have voice recognition. B Smartphone Cancel 3 4 use Once activated, to restart the voice rec-

ognition system, briefly press button on the steering wheel or steering column of your vehicle, or briefly press button 3 on the touchscreen of your multimedia system. You can go back to the main menu at any time by pressing 4. note: when using voice recognition, the Media and Radio functions will not be available or accessible from the main menu of your multimedia system. GB.58 using Voice recognition (4/4) 6 Smartphone Bluetooth Settings Smartphone Open/Close with command

: Make a short or a long press. Wait for the signal tone to start speaking. To speak once more, make a short press. To close, make a long press. Audio Display Bluetooth System 7 Help You can get additional help on the op-

eration and usage conditions of the voice recognition system. To do this, press Home > Setting > Bluetooth. Select the second page by pressing 7, then press 6. This function is presented in the form of screens explaining how to use voice recognition, alongside the:

conditions of use;

compatible telephones;

activation and deactivation of the function using the steering wheel/

column controls;

method for interacting with the screen;

available functions;

extent of the functions. GB.59 PHone BooK 1 Phone Book Adam Smith Vincent Casse Car Repair Hugo Dr. Brown Search by Name 2 From the Phone device menu, press 1 to scroll through the list of menus and then Phone Book to access the system telephone directory. using your Phone Book You can use the Phone Book entries stored on the memory of phone. After connecting your system and your Bluetooth phone using Bluetooth wireless technology, your phonebook numbers are automatically transfer-

red into the system if the contacts are stored in the telephone memory of your device. note: On some phones, the system may ask you to confirm the transfer of the phonebook to the system during pairing. calling a number in the Phone Book After finding the contact in the pho-

nebook you want to call, select the number to place the call. searching for a contact in the phonebook Press 2 then enter the surname or first name of the contact you are seeking, using the digital keypad. GB.60 Depending on the make and model of your phone, transferring your contacts to the multimedia system may not work. It is recommended that you stop your vehicle before en-

tering a number or search-

ing for a contact. MaKing, receiVing a caLL (1/3) Adam Smith 1 Calling Lists Close All Making a call from the phonebook With the telephone connected, from the Phone device menu, select Phone Book from drop-down menu 1. Select the contact (or the suitable number of the contact has more than one). The call is made automatically by pressing the contacts number. note: you can make a call from the multimedia system using the voice re-

cognition from your smartphone. Refer to the Section entitled Using voice re-

cognition. 6 4 5 2 3 dialling a number from the call history You can use the call list stored on the phone memory to make a call. After connecting your unit and Bluetooth phone via Bluetooth wi-

reless technology, the numbers in your phone's All Calls, Outgoing Calls, Incoming Calls, and Missed Calls lists are transferred automatically into the call list on your multimedia system. Press 1 to scroll the list and then press Calling Lists. Press 6 to access to the list of All Calls. Press 5 to access the list of Outgoing Calls. Press 4 to access the list of Incoming Calls. Press 3 to access the list of Missed Calls. note: The marker 2 indicates the number of missed calls. For each list, the contacts are listed from the most recent to the oldest. Select a contact to make the call. GB.61 MaKing, receiVing a caLL (2/3) 7 1 Dial note: you can answer or reject an in-

coming call using your vehicles remote control. Incoming call Agree Reject 8 entering a number Press 1 to scroll through the list, then Dial for the call number. Press the numbered buttons to dial the number, then press 7 to place the call. To delete a number, press 8. Press and hold 8 to delete all the numbers at once. It is recommended that you stop your vehicle before en-

tering a number or search-

ing for a contact. GB.62 receiving a call When receiving a call, a message is displayed on the multimedia system screen with the following information on the caller:

the name of the contact (if the number is present in the phonebook list);

callers number;

Unknown Number (if the number cannot be viewed). note: when the incoming call message appears on the screen during naviga-

tion, accept or reject the call to return to the navigation screen. MaKing, receiVing a caLL (3/3) 9 Dial hear sound through the vehicle spea-

ker by pressing 10;

press 14 to return to the previous screen (the navigation screen, for example) or the welcome screen. 11 13 12 10 14 during a call During a call you can:

switch the microphone off by press-

ing 12;

switch the microphone on by press-

ing 13;

hang up by pressing 9;

hear sound through the phone spea-

ker by pressing 11;

GB.63 reMote engine start-uP (1/3) Dark Remote Engine Start a 2 Warning: Never park your vehicle in an enclosed room Automatic Start Car Ready for Off On Change Wake up every 2 hours Off On Car will be ready in 0 hours & 0 minutes OK 3 4 select the On button on the Automatic Start line to activate the function;

set the start time when you wish to use your vehicle by pressing button 2;

press on the up and down arrows to scroll through the hours and min-

utes until you get the desired time;

press OK to confirm. The 4 marker shows you the time left before the time you wished to use the vehicle;

press OK 3 to confirm and finalise the programming;

Radio Media Phone Driving eco2 Nav Setting Set Time 1 When fitted, this function lets you pro-

gramme the engine to start remotely, in order to heat or ventilate the passen-

ger compartment up to 24 hours before using the vehicle. Adjust the heating level required (tem-

perature, de-icing) before programming the function. Configuration and pro-

gramming are done via the multimedia display. setting the start time for the function Switch on the ignition, then press 1 from the main menu. Screen A is dis-

played;

GB.64 Remote Engine Start Departure Time Set OK adjust the air-conditioning controls to the desired temperature in the pas-

senger compartment when starting up the engine, then set to de-icing mode (please see Section 2 of the vehicle manual);

To activate remote start-up by pro-

gramming, you must select a time at least fifteen minutes later than the time displayed by the multimedia system. reMote engine start-uP (2/3) Remote Engine Start Dark Warning: Never park your vehicle in an enclosed room Automatic Start Car Ready for Off On Change Wake up every 2 hours Off On Car will be ready in 0 hours & 0 minutes OK 5 Radio Media Phone Driving eco2 Nav Setting 11:05 AM 6 turn off the ignition. When locking your vehicle, two flashes, then the hazard warning lights and in-

dicator lights switching on for approxi-

mately three seconds indicate that the programming has been taken into ac-

count. The remote engine start-up operates if:

the lever is in neutral for vehicles with a manual or sequential gearbox;

the lever is in position P for vehicles with an automatic gearbox;

the ignition is switched off;

all the opening elements (bonnet, doors, boot) are closed and locked when you leave the vehicle. note: you must switch off your multi-

media system when you leave your ve-

hicle for remote engine start-up to work. Wake up every 2 hours This function enables your vehicle to start automatically every two hours de-

pending on the engine temperature. To activate this function, press the On button 5. note: the ventilation system must be off for the Wake up every 2 hours function to activate. When this function is activated, the ven-

tilation system will not activate during the first four start-ups, if they happen. In very cold conditions, the vehicle will start automatically and will stay on for approximately ten minutes before switching off. If the engine temperature does not re-

quire a restart, the vehicle will not start automatically during the first four reac-

tivation times and will return to standby for two hours. The engine will be re-

started if the engine temperature is too low. In all cases, the last start-up will happen. Approximately fifteen minutes before the programmed time, the engine starts and remains on for about ten minutes. note: the marker 6 reminds you of the vehicle start time that you have already set. GB.65 reMote engine start-uP (3/3) drivers responsibility when parking or stopping the vehicle Never leave an animal, child or adult who is not self-suffi-

cient alone on your vehicle, even for a short time. They may put them-

selves or others at risk, for example by starting the engine, switching on equipment such as the electric win-

dows or by locking the doors etc. Also, in hot and/or sunny weather, please remember that the tempera-

ture inside the passenger compart-

ment increases very quickly. risK oF deatH or serious inJury. special feature on vehicles equipped with the Wake up every 2 hours function. It is imperative that the vehicle is driven for at least 10 minutes be-

tween each use of the function. Risk of engine oil wear. Depending on the vehicle, please ensure that consumers such as the wipers, exterior lights, radio, heated seats, heated steering wheel, etc. are disabled and all accessories are disconnected before leaving the ve-

hicle. In extreme conditions, the remote start-up by programming may not work. Do not park the vehicle or run the engine in locations where combustible sub-

stances or materials such as grass or leaves can come into contact with the hot exhaust system. GB.66 Do not use the engine remote start-up function or its programming when:

the vehicle is in a garage or in a confined space. risk of poisoning or suffoca-

tion by exhaust gas emissions. the vehicle is covered with a pro-

tective cover. Fire hazard. the bonnet is open or before it opens. risk of burns or serious injury. depending on the country, the use of the remote starting func-

tion or its programming can be prohibited by the legislation and/

or the regulations in force. Before using this function, check the legislation and/or the regula-

tions for the country in force. reVersing caMera (1/2) operation Shifting into reverse gear (and up to approximately five seconds after shift-

ing to another gear), a view of the sur-

roundings to the rear of the vehicle is displayed on the multimedia system screen accompanied by the guide, a silhouette of the vehicle and beeps. Ultrasonic sensors installed in your ve-

hicle measure the distance between the vehicle and an obstacle. When the red zone is reached, use the bumper image to stop accurately. note: for more information on using parking assistance, please see your owners handbook. note: Make sure that the reversing camera is not obscured (by dirt, mud, snow, etc.). Parking assistance Rear view camera Off On Obstacle detection Display Settings Brightness Map Mode Background Parking assistance Low Mid. High Auto Day Night Dark Light Audio Display Bluetooth System 1 activation/deactivation reversing camera You can activate/deactivate the revers-

ing camera. To do this, from the main menu, select Setting > Display, then press button 1. Select On to activate the function or Off to deactivate it. obstacle detection sensors You can independently activate or de-

activate the front and/or rear the sen-

sors of your vehicle. To do this, from the main menu select Setting > Display

> Parking assistance > Obstacle de-

tection. Select On to activate the de-

sired sensor(s) or Off to deactivate it/

them. GB.67 reVersing caMera (2/2) 3 4 Off On Look in all directions 2 Look in all directions 67 5 settings Press 2 to display a list of settings. You can activate or deactivate the guide display by pressing 3 or 4. Press + or - to set the contrast 5, brightness 6 and colours 7. This function is an additional aid. It cannot, therefore, under any circum-stances replace the vigilance or the responsibility of the driver. The driver should always look out for sudden hazards during driving:

always ensure that there are no moving obstacles (such as a child, animal, pram, bicycle, etc.) or small, narrow objects such as stones or posts in your path when manoeu-

vring. GB.68 The screen shows a reverse image. The gauges are a representation projected onto flat ground. This in-

formation must not be taken into account when superimposed on a vertical object or an object on the ground. Objects which appear on the edge of the screen may be deformed. In very bright light (snow, vehicle in sunshine etc.), the camera vision may be adversely affected. systeM settings (1/3) Display Settings Brightness Map Mode AC Info Low Mid. High Auto Day Night Off On Background Dark Light Audio Display Bluetooth System To access the multimedia system set-

tings from the welcome screen, press Setting, then select a section at the bottom of the screen. audio settings Please refer to the section on Audio settings. display settings Brightness You can set the brightness of the screen to your liking. You have the option of three modes:

Low;

Mid. (Medium);

High. Map Mode To improve the visibility of the naviga-

tion screen between day and night, you can change the combination of the col-

ours of the map. Auto: the map screen is displayed by GPS. The switch to daytime or night-time running lights is auto-

matic, depending on whether the headlights are on. Day: The map screen is always dis-

played with bright colours. Night: the map screen is always displayed using darker colours. ac info This function activates/deactivates the display of air conditioning information when adjusting settings. Background This function enables you to choose between a dark or light display mode. Parking assistance This function allows you to activate/dis-

able the reversing camera, as well as the front and/or rear sensors. Bluetooth settings Refer to the section entitled Pairing/

unpairing Bluetooth devices. GB.69 clock This function allows you to set the time format between the 12h and 24h clocks. note: The time is set automatically by GPS. You will need the maps for the country in which you are currently lo-

cated to get the local time. To change time manually, pressClock/Units, then select Time Setting. units This function allows you to set the unit of distance displayed on your multime-

dia system. You can change the unit between the km and mls. the Factory settings This function allows you to reset vari-

ous settings to the default settings. All: resets all Factory Settings to default settings. Phone: Initializes all the settings re-

lated with phone. Navigation: Initializes all the settings related with navigation. A u d i o / M e d i a / R a d i o / S y s t e m :

Initialises all the settings related with Audio, Media and Radio. navigation This function enables you to activate or deactivate the system navigation. system Version This function allows you to check the version of system. systeM settings (2/3) System Settings Language Clock/Units Factory Settings Navigation Off On Audio Display Bluetooth System system setting Language This function allows you to change the language used in the system and voice guidance language. To change the language, select the de-

sired language and confirm your choice by pressing OK. GB.70 entering the code incorrectly If the code is entered incorrectly, the message Incorrect PIN The system is locked is displayed. Wait one minute and then re-enter the code. Each time the code is entered incor-

rectly, the time required before the code can be re-entered is doubled. systeM settings (3/3) security code Your audio system is protected by a se-

curity code (supplied by the Approved Dealer). This is used to electronically lock the audio system when the power is cut (battery disconnected, system disconnected, fuse blown etc.). To operate the audio system, you must enter the secret four-digit code. Make a note of the code and keep it in a safe place. Contact one of the manu-

facturers agents if you lose it. entering the code The message CODE followed by four empty spaces and a numerical keypad are displayed. Enter the corresponding code using the digital keypad, then press OK to con-

firm. GB.71 installing the software Install the Naviextras Toolbox in a few clicks on your computer. The Toolbox can be downloaded from the manufac-

turers website. After downloading the installation file from the website Naviextras.com, simply double-click the file to start the installation. Follow the instructions shown on the screen. creating an internet account To log in, click on the Not logged in icon in the toolbar at the top of the page or click the Log in button on the main screen of the Toolbox. If you are not registered on the website Naviextras. com, you can do this from the Toolbox by clicking on Register on the log-in page. uPdating tHe systeM (1/4) Using the USB key and a computer with an Internet connection, you can:

update your map content;

update the multimedia system;

purchase new maps;

upgrade the POI content. In certain countries it is illegal to download and activate the warning areas and this can lead to prosecu-

tion. GB.72 Latest map guarantee Once your new vehicle has been deliv-

ered, you will have a maximum of 90 days in which to update the map for free. Once this time has elapsed, you will need to pay for updates. The screens shown in the user manual are not contractual. uPdating tHe systeM (2/4) registering the multimedia system with the toolbox To register your multimedia system on your user profile, first insert an empty USB key into the multimedia system. note: to insert the USB key into your multimedia system, refer to the infor-

mation on Inserting the USB key in the Navigation system section. note: the USB key is not provided with the system. note: The USB key used must be for-

matted to FAT32 format and have a minimum capacity of 4GB and a maxi-

mum capacity of 32GB. Navigation Update Close Destination Route Options saving the system on a usB key When the USB key is inserted into the multimedia system's USB port, select Nav > Options > Map Update >

Options > Update on the second page. This creates a fingerprint of your nav-

igation system on the USB key which will be used by the Toolbox to register your system on your user profile and to let the Toolbox determine which up-

dates are available for your navigation system. When the process of data recording is finished, you may remove the USB key from the multimedia system. Insert your USB key in your computer

(the computer must be connected to the internet). If your subscription allows and the Toolbox finds your system in the list of supported systems, the name of your system will appear at the top of the Toolbox window. Your system is saved on your user pro-

file. note: to register the system data on the USB key, start the vehicle and do not switch off the engine while data is loading. note: do not use any of the multimedia system functions during the procedure. GB.73 uPdating tHe systeM (3/4) downloading updates from the toolbox to the usB key If you purchased any free or pay con-

tents, please click on the updates button in the menu bar on the left side of Toolbox. The updates button will open a screen which shows all available updates, in-

cluding:

items that you have purchased but not yet installed (updates or extras);

free updates and extras that you added to the installation file from the catalogue;

system updates (if a newer version available);

and special free updates. The list shows all available updates by region in a list and on a world map. GB.74 By default, all items belonging to all regions are selected for installation. If you decide to skip a region for now, un-

check the checkbox at the beginning of its table row. After reviewing the table, click Install at the bottom of the screen to start the installation process. The Toolbox starts to download and in-

stall the selected updates. Please wait until you see the message indicating the update has finished. The Toolbox warns you if the se-

lected items exceed the maximum capacity of the multimedia system. In this case, you can select which items can be installed or removed in the system so that it does not exceed the storage limit. Even if items are removed in the system, you still have ownership of items and can install them later for free. Please neither remove the USB key from the system, nor shut the system down while update is in progress. In certain countries it is il-

legal to download and ac-

tivate the speed camera warnings and this could lead to prosecution. uPdating tHe systeM (4/4) updating the system and map When the process of downloading is completed, the USB key can be re-

moved from the computer. Insert the USB key into the USB port of the vehi-

cle's multimedia system. note: to update maps, start the vehicle and do not switch off the engine while data is loading. When the multimedia system is turned on, it automatically identifies the avail-

able updates on the USB key, and offers to update the system or map from the updates found on the USB key. Do not switch off your multimedia system while the update is being installed. note: downloading and installing a system update is only possible if there is a newer version available. a Update Info Current Software Info Old version. New Software Info New version. Update 2 1 The screen A is displayed automati-

cally once the USB key is connected;

press 2 to run the update;

previous 1 to go back to the previous screen. When you press the button 2, the update procedure is launched. Do not use any of the system functions during the update procedure. When the update is completed, the multimedia system restarts with all new and up-to-date functionality. Licence To obtain the GPL, LGPL, MPL and other open source licence source codes in this product, please visit the http://opensource.lge.com website. As well as the source code all the terms of the licence, warranty exclusions and copyright details are available for download. LG Electronics will also provide you with Open Source code on a CD-ROM against payment of distribution costs

(such as media, shipping and han-

dling costs) on request by post to opensource@lge.com. This offer is valid for three years as of the date on which you purchased the product. The multimedia system might restart automatically during the update process. Please wait for the radio screen to be displayed. If the update is accidentally inter-

rupted, restart the process from the beginning. GB.75 oPerating FauLts (1/3) description No image is displayed. system causes The screen is on standby. The system is deactivated. solutions Ensure that the screen is not on standby. The interior temperature of the vehicle is too low or too high. The volume is set to minimum or mute. Increase the volume or deactivate mute. No sound can be heard. The selected system source is not cor-

rect. Check the selected system source and make sure the output source is the multi-

media system. No sound comes from the left, right, front or rear speakers. The balance or fader settings are incor-

rect. Adjust the sound balance or fader cor-

rectly. The displayed time is not correct. The time setting is set to Auto and the system is no longer receiving a GPS signal. Move the vehicle until you receive a GPS signal. description Media causes solutions No sound can be heard. The volume is set to minimum or mute. Increase the volume or deactivate mute. GB.76 oPerating FauLts (2/3) description No sound can be heard. navigation causes The volume on the Nav menu is set to minimum or mute. solutions Increase the volume (Options in the Nav menu) or deactivate the mute func-

tion. The volume in GPS mode can be ad-

justed during voice guidance. The location of the vehicle on the screen does not correspond to its actual loca-

tion. The directions on the screen do not cor-

respond to the actual road. Incorrect positioning of the vehicle caused by GPS reception. Move the vehicle until reception of the GPS signal is improved. The version of sytem is out of date. Obtain the latest version of the system. Certain items on the menu are not avail-

able. Depending on the current command, some items will be unavailable. Voice guidance is unavailable. The navigation system does not include the intersection. Voice guidance is deactivated. Increase the volume. Ensure voice guidance is activated. The directions of the voice guidance do not correspond to your exact location. The voice guidance may vary according to the environment. Drive according to the actual conditions. The suggested route does not start or end at the required destination. The destination is not yet recognised by the system. Enter a road near to the required desti-

nation. GB.77 oPerating FauLts (3/3) description No sounds or ringtone can be heard. Phone causes The mobile phone is not connected to the system. The volume is set to minimum or mute. solutions Ensure that the mobile phone is con-

nected to the system. Increase the ringtone volume or deacti-

vate the mute function. Impossible to make a call. The mobile phone is not connected to the system. The phone keypad has been locked. Ensure that the mobile phone is con-

nected to the system. Unlock the phone keypad. GB.78 GB.79 aLPHaBeticaL index (1/3) a address book ........................................GB.34, GB.44 GB.45 answering a call ..................................................GB.12, GB.62 ARTIST ...........................................................................GB.23 AUX ................................................................ GB.22 GB.24 auxiliary source............................................... GB.22 GB.24 B BALANCE .......................................................................GB.25 BASS ..............................................................................GB.25 bass ................................................................................GB.26 Bluetooth connection ......................................................GB.54 Bluetooth ..............................................GB.51, GB.54, GB.60 Bluetooth portable audio player pairing .......................................................................GB.23 unpairing ...................................................................GB.23 c call ....................................................................GB.60 GB.61 call history.......................................................................GB.61 call volume......................................................................GB.17 clock ...............................................................................GB.70 display .......................................................................GB.70 confirm a destination ........................................GB.35 GB.36 connect a telephone .......................................................GB.54 contacts list .....................................................................GB.60 controls .................................................GB.8 GB.12, GB.15 d destination ... GB.31 GB.36, GB.34, GB.41, GB.44 GB.45 destination menu ............................................ GB.31 GB.36 detailed route ..........................................GB.36, GB.39, GB.42 detour .................................................................GB.41, GB.49 dialling ............................................................................GB.62 dialling a number ............................................................GB.62 disconnect a telephone...................................................GB.55 GB.80 distance units..................................................................GB.70 e ECO driving ....................................................................GB.50 ending a call ...................................................................GB.12 entering an address ........................................................GB.31 F fascias and steering wheel controls.................. GB.8 GB.12 fast winding.....................................................................GB.22 favourite delete ........................................................................GB.45 functions ............................................................. GB.5 GB.7 g GPS guidance receiver .........................................................GB.27, GB.48 reception ...................................................................GB.27 activation ...................................................................GB.37 map ........................................................... GB.37 GB.42 voice ......................................................... GB.37 GB.42 J Jack socket .........................................................GB.11, GB.24 L language change ......................................................................GB.70 languages .......................................................................GB.70 LIST mode ......................................................................GB.19 M MANU mode ...................................................................GB.18 map digitised map .............................................................GB.27 aLPHaBeticaL index (2/3) display ...........................................................GB.28, GB.43 scale .........................................................................GB.28 settings .........................................................GB.43, GB.46 map symbols ..................................................................GB.28 MEMO mode ..................................................................GB.19 MENU ............................................................................. GB.11 MP3 ................................................................................GB.22 mute................................................................................GB.17 n numeric keypad ..............................................................GB.16 o operating faults ............................................... GB.76 GB.78 operation.........................................................................GB.13 P pairing a telephone .........................................................GB.51 POI .......................................... GB.30, GB.32 GB.33, GB.43 point of interest ........................ GB.29, GB.32 GB.33, GB.43 r radio station .................................................... GB.18 GB.21 range of wavelengths ..................................... GB.18 GB.21 RDS ..................................................................................GB.5 rear view camera ..............................................GB.67 GB.68 receiving a call ................................................................GB.62 remote engine start-up ................................... GB.64 GB.66 reversing camera parameters ................................................................GB.69 ringtone volume ..............................................................GB.26 s screen menu ...........................................................................GB.7 monitor ..........................................................GB.11, GB.13 navigation display .........................GB.7, GB.37 GB.42 navigation screen ...................................... GB.37 GB.42 settings .....................................................................GB.43 security code ..................................................................GB.71 select track ..........................................................................GB.24 setting .............................................................................GB.42 settings ............................... GB.47 GB.49, GB.69 GB.71 audio ...............................................GB.25 GB.26, GB.69 balance .....................................................................GB.26 brightness .................................................................GB.69 fader ..........................................................................GB.26 stage ...............................................................................GB.41 storing a radio station .....................................................GB.19 switching off ....................................................................GB.13 system update ....................................................... GB.72 GB.75 t 3D/2D mode ...................................................................GB.37 TMC Traffic Information ..................................................GB.36 traffic information ................................................GB.20, GB.49 treble.................................................................GB.25 GB.26 u unpairing a telephone .....................................................GB.52 USB ................................................................ GB.72 GB.75 USB key.......................................................... GB.72 GB.75 USB socket .............................GB.11, GB.23, GB.72 GB.75 V vehicle position ...............................................................GB.28 voice control .......................................GB.10, GB.56 GB.59 voice recognition.................................GB.12, GB.56 GB.59 volume ............................................................................GB.17 volume: adapted to speed ..................................GB.17, GB.25 GB.81 aLPHaBeticaL index (3/3) W WMA ...............................................................................GB.22 GB.82 WARNING STATEMENT Part 15.19 statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Part 15.21 statement Changes or modifications not expressly approved by the manufacturer (or party responsible) for compliance could void the users authority to operate the equipment. Part 15.105 statement This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. if this equipment does cause harmful interference or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement FCC Radiation Exposure Statement: This equipment complies with FCC Radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.

 

 

InternalviewofEUT TopviewofMainPCB BottomviewofMainPCB TopviewofLCDPCB BottomviewofLCDPCB TopviewofSubPCB1 BottomviewofSubPCB1 ViewofBluetoothmodule BT module ViewofBluetoothantenna Multilayer Chip Antenna

 

 

TopviewofEUT BottomviewofEUT FrontviewofEUT RearviewofEUT SideviewofEUT

 

 

MAIN LABEL Renault B-AVN

- Model : Renault B-AVN_ULC4.0

- : TBD, LGEVH

- Label Size : 80 X 66 mm

- Label Material : SW7325 0.07t/S2420/BG40 1. Main Label : Product Information (Same as ULC 3.0 Fomat) PV Label_1st Main Label Regulation Label 1. RENAULT Logo Fixed 2. Product Imformation 1) PART NAME : TBD 2) PART CODE : TBD 3) SUPPLIER CODE : TBD 4) MODEL NO :

- LAN5800WR0

- LAN5810WR0 5) Voltage and Current

: DV 12 V 3.5 A 3. Renault Serial No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1) 2) 3) 1) Renault Paer Code, 10 Byte 2) Separation code, T, 1 Byte 3) PRE Code, 4 Byte This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Config : XXXXXX HW Ver : X.X.X SW Ver : X.X.X XXXX XXXXX --X XXX XXX LAN58XXWR0 DC 12 V 3.5 A UA.TR.YYY LG Electronics European Shared Service Center B.V. Krijgsman 1, 1186 DM Amstelveen, The Netherlands LG Electronics MADE IN VITENAM 123456789 XXXXXXXXXXXXXXX YYYY.MM.DD MEZXXXXXXXX 4. Date YYYY.MM.DD 8. Product Imformation 1) Config : TBD 2) HW Ver. : TBD 3) SW Ver. : TBD 7. LG Serial No. 1 2 3 4 5 6 7 8 9 1) 2) 3) 1) Year : Last of Year, 1 Byte 2) Manufacture month, 2 Byte 3) Sequence No., 6 Byte 6. Production Site 1) LG Electronics : Fixed 2) MADE IN VIETNAM : Fixed 5. Part No. LGE Main Label P/N : TBD 2. Sub Label : Regulation mark, Certification No.

* This marking should be printed after Regulation & Certification approval. (Generally before MP event) Complies with IMDA Standards DAXXXXXX PV Label_1st Este equipamento opera em carter secundrio, isto , no tem direito a proteo contra interferncia prejudicial, mesmo de estaes do mesmo tipo, e no pode causar interferncia a sistemas operando em carter primrio. LAN5800WR0 LAN5810WR0 FREQUENCY RANGE :

FM 87.5~108MHz, MW(AM) 144~1629kHz

(Only for Saudi Arabia Certification Use) TBD TRA Registered No.

:XXNNNNNN/NN Dealer No.

:XXNNNNN/NN TA XXXX-YYYY TRA Registered No.

:XXNNNNNN/NN Dealer No.

:XXNNNNN/NN TA XXXX-YYYY APPROVED APPROVED XXX-XXXXXX XXX-XXXXXXX XXX-XXXXXX XXX-XXXXXXX XXXXX/SDPPI/XXXX XXXX IFT : XXXXXXXXXXXXX ETA No. : NR-ETA/XXXX FCC ID : BEJXXXXXXXXXX TRC/GPS/XXXX/XX CNC ID: XX-XXXXX NCA APPROVED

: XXXXXXXX XXXXX/SDPPI/XXXX XXXX IFT : XXXXXXXXXXXXX ETA No. : NR-ETA/XXXX FCC ID : BEJXXXXXXXXXX TRC/GPS/XXXX/XX CNC ID: XX-XXXXX NCA APPROVED

: XXXXXXXX MEZXXXXXXXX

[] (TBD)

[] (TBD)

(SOP) Logo &

Mark Label TBD NCA APPROVED : XXXXXXXX XXX-XXXXXX XXX-XXXXXXX UA.TR.YYY LG Electronics LG Electronics European Shared Service Center B.V. Krijgsman 1, 1186 DM Amstelveen, The Netherlands CNC ID : XX-XXXXX ETA No. : NR-ETA/XXXX TRC/GPS/XXXX/XX IFT : XXXXXXXXXXXXX FCC ID : BEJXXXXXXXXXX FREQUENCY RANGE :

FM 87.5~108MHz, MW(AM) 144~1629kHz

(Only for Saudi Arabia Certification Use) Complies with IMDA Standards DAXXXXXX TA XXXX-YYYY APPROVED XXXXX/SDPPI/XXXX XXXX TRA Registered No.

:XXNNNNNN/NN Dealer No.

:XXNNNNN/NN

 

 

LG Electronics USA 1000 Sylvan Ave Englewood Cliffs, NJ 07632-0763 United States 06 December 2017 FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad, Columbia,MD21046 LETTERFORAUTHORIZATION FCC ID: BEJLAN5800WR0 Towhomitmayconcern:

I,theundersigned,herebyauthorizeLabManagerHyunchae, You (or Logan, Lee) andof SGSKoreaCo.,Ltd.andhereafterreferredtoasSGSKorea,toactonourbehalfinallmanners relatingtoapplicationforequipmentauthorization,includingsigningofalldocumentsrelating tothesematters.AnyandallactscarriedoutbyLabManagerHyunchae, You(orLogan,Lee)of SGSKoreaCo.,Ltd.onourbehalfshallhavethesameeffectasactsofourown. I,theundersigned,herebycertifythatwearenotsubjecttoadenialoffederalbenefits,that includesFCCbenefits,pursuanttoSection5301oftheAntiDrugAbuseActof1988,21U.S.C. 853(a). InauthorizingSGSKoreaasouragent,westillrecognizethatweareresponsibleto:

a) complywiththerelevantprovisionsofthecertificationprogram;

b) makeallnecessaryarrangementsfortheconductoftheevaluation,includingprovision forexaminingdocumentationandaccesstoallareas,records(includinginternalaudit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment,surveillance,reassessment)andresolutionofcomplaints;

c) makeclaimsregardingcertificationonlyinrespectofthescopeforwhichcertification hasbeengranted;

d) do not use our product certification in such a manner as to bring the Certification Divisionintodisreputeandnotmakeanystatementregardingourproductcertification whichtheCertificationDivisionmayconsidermisleadingorunauthorized;

e) upon suspension or cancellation of certification, discontinue use of all advertising matterthatcontainsanyreferencetheretoandreturnanycertificationdocumentsas requiredbytheCertificationDivision;

f) usecertificationonlytoindicatetheproductsarecertifiedasbeinginconformitywith specifiedstandards;

g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleadingmanner;

h) ensurethatanyreferencetoourproductcertificationincommunicationmediasuchas documents, brochures or advertising, complies with the requirements of the CertificationDivision;

LG Electronics Inc. 222 LG-ro, Jinwi-myeon, Pyeongtaek-si, Gyeonggi-do, 451-713, Korea TEL: +82-31-610-6193 i) j) keep a record of all complaints made known to the us relating to the products compliance with requirements of the relevant standard and to make these records availabletotheCertificationDivisionwhenrequested;

takeappropriateactionwithrespecttosuchcomplaintsandanydeficienciesfoundin productsorservicesthataffectcompliancewiththerequirementsforcertification;

k) documenttheactionstaken. Thisauthorizationisvaliduntilfurtherwrittennoticefromtheapplicant. SincerelyYours Kyung-Su Han Director, NA Regulatory & Environmental Affairs LG Electronics USA

 

 

LG Electronics USA 1000 Sylvan Ave Englewood Cliffs, NJ 07632-0763 United States 06 December 2017 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road, Columbia, MD 21046 REQUEST FOR CONFIDENTIALITY FCC ID: BEJLAN5800WR0 Pursuant to Sections 0.457 and 0.459 of the Commissions Rules (CFR 47), and Section 552 (b) (4) of the Freedom of Information Act, LG Electronics USA hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short-Term Confidentiality for 180 days after the grant as outlined in Public Notice DA 04-1705. This provision will give LG Electronics USA temporary confidentiality of commercially sensitive information prior to product release. The requested Permanent and Temporary Confidential exhibits are listed as follows:

CONFIDENTIAL LIST Permanent 1 2 3 4 5 6 7 Short-Term Block Diagram Operational Descriptions Schematics External Photos Internal Photos Test-Setup Photos User Manual The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be made public before the date of the Grant for this application. Sincerely Yours Kyung-Su Han Director, NA Regulatory & Environmental Affairs LG Electronics USA