FCC ID: BEJE18MRE07 Household Refrigerator

Order Number Test Report Number

: GETEC-C1-17-384

: GETEC-E3-17-040 FCC Part 18 Page 1 / 1 APPENDIX H

: USERS MANUAL EUT Type: Refrigerator FCC ID.: BEJE18MRE07 OWNERS MANUAL BUILT-IN REFRIGERATOR Read this owner's manual thoroughly before operating the appliance and keep it handy for reference at all times. SKSCR3001P MFL_00 www.thesignaturekitchen.com Copyright 2017 Signature Kitchen Suite. All Rights Reserved. ENGLISHFRANAISESPAOL TABLE OF CONTENTS 2 TABLE OF CONTENTS 3 PRODUCT FEATURES 4 SAFETY INSTRUCTIONS 4 Important safety instructions 8 PRODUCT SPECIFICATIONS 9 PRODUCT OVERVIEW 9 10 Exterior Interior Internal Water Dispenser 11 OPERATION 11 Before Use 12 Control Panel 14 14 Storing Food 15 Drawers 17 Door Bins 17 Adjusting the Shelves 18 Adjusting the Snack Pan 19 SMART FUNCTIONS 19 SIGNATURE KITCHEN SUITE Application 21 Smart Grid Function 22 Smart Diagnosis Function 25 MAINTENANCE 25 Cleaning 26 Replacing the Water Filter 31 TROUBLESHOOTING 31 FAQs: Frequently Asked Questions 32 Before Calling for Service 40 WARRANTY PRODUCT FEATURES Depending on the model, some of the following functions may not be available. PRODUCT FEATURES 3 FILTERED WATER The water dispenser dispenses fresh, chilled water. DOOR ALARM The Door Alarm function is designed to prevent refrigerator malfunctioning that could occur if a refrigerator door or freezer drawer remains open. If a refrigerator door or freezer drawer is left open for more than 60 seconds, a warning alarm sounds at 30-second intervals. ENGLISH SAFETY INSTRUCTIONS 4 SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USE Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and follow all safety messages. This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or injure you and others. All safety messages will follow the safety alert symbol and either the word WARNING or CAUTION. These words mean:

WARNING You may be killed or seriously injured if you do not follow instructions. CAUTION You may be injured or cause damage to the product if you do not follow instructions. All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what may happen if the instructions are not followed. IMPORTANT SAFETY INSTRUCTIONS WARNING To reduce the risk of explosion, fire, death, electric shock, scalding or injury to persons when using this product, follow basic precautions, including the following:

California Proposition 65 This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. (USA only) SAFETY INSTRUCTIONS 5 OPERATION This product is not to be used for special purposes such as the storage of medicine or test materials or for use on ships, etc. DO NOT allow children to climb, stand, or hang on the refrigerator doors or on the shelves in the refrigerator. They could damage the refrigerator and seriously injure themselves. Do not allow children to climb into the refrigerator. They could be trapped and suffocated. Children should be supervised to ensure that they do not play with the refrigerator. Keep fingers out of pinch point areas; clearances between the doors and cabinets are necessarily small. Be careful closing doors when children are nearby. Do not touch frozen food or the metal parts in the freezer compartment with wet or damp hands. Doing so may cause frostbite. Do not refreeze frozen food that has thawed completely. Doing so may result in a serious health hazard. Do not use an adapter plug or plug the power plug into a multi-outlet extension cord. Do not use a cord that shows cracks or abrasion damage along its length or at either the plug or connector end. Immediately have all power cords that have become frayed or otherwise damaged repaired or replaced by qualified service personnel. Do not operate the refrigerator or touch the power cord with wet hands. Do not modify or extend the power cord. Do not use an uncertified power outlet. Do not plug appliance into a damaged wall outlet. Do not put hands, feet or other objects into the air vents or bottom of the refrigerator. Doing so could result in personal injury or electric shock. In the event of a gas leak (propane/LPG), ensure the area is adequately ventilated and contact an authorized service center before resuming use. Do not touch the refrigerator or power cord of the refrigerator. Disconnect the power cord immediately and contact an authorized service center if there is a strange noise, odor, or smoke coming from the appliance. Do not use any fuse (such as copper, steel wire, etc.) other than a standard fuse. Do not place or use an electrical appliance inside the refrigerator, unless it is of a type recommended by the manufacturer. Do not put animals inside the appliance. Do not place heavy or fragile objects, liquid filled containers, combustible substances, or flammable objects

(such as candles and lamps) on the appliance. Avoid contact with any moving parts of the ejector mechanism or with the heater that releases the ice cubes. DO NOT place fingers in the automatic icemaker when the refrigerator is plugged in. When dispensing ice from the dispenser, do not use a fragile container. ENGLISH 6 SAFETY INSTRUCTIONS This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety. If connected to a circuit protected by fuses, use time delay fuse. MAINTENANCE Do not use a hair dryer to dry the inside of the refrigerator. Do not light a candle to remove odors in the refrigerator. In the event of a refrigerant leak, move flammable objects away from the refrigerator. Ensure the area is adequately ventilated and contact an authorized service center. Keep flammable materials and vapors, such as gasoline, away from the refrigerator. This appliance is intended to be used in household and similar applications such as staff kitchen areas in shops, offices and other working environments; farm houses and by clients in hotels, motels and other residential type environments; bed and breakfast type environments; catering and similar non-retail applications. Unplug the power plug before cleaning or repairing the refrigerator. The refrigerator and freezer compartment lights are interior LED lighting, and service should be performed by a qualified technician. Unplug the power plug immediately in the event of a blackout or thunderstorm. Turn the power off if water or dust penetrates into the refrigerator. Call a service agent. Do not store glass containers or soda in the freezer compartment. Contents may expand when frozen, break the container and cause injury. Do not store, disassemble or repair the appliance yourself or allow unqualified personnel to do so. If the electrical supply cord is damaged, it must only be replaced by the manufacturer or its service agent or a similar qualified person in order to avoid a hazard. Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance. In case of LED, it should be replaced by service person. DISPOSAL Junked or abandoned refrigerators are dangerous, even if they are sitting for only a few days. When disposing of the refrigerator, remove the packing materials from the door or take off the doors but leave the shelves in place so that children may not easily climb inside. If disposing of a refrigerator, make sure the refrigerant is removed for proper disposal by a qualified servicer. If you release the refrigerant, you may be fined or imprisoned in accordance with the relevant environmental law. GROUNDING INSTRUCTIONS Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service personnel if you are in doubt whether the appliance is properly grounded. Do not modify the plug provided with the appliance; if it will not fit the outlet, have a proper outlet installed by a qualified electrician. Have a certified electrician check the wall outlet and wiring for proper grounding. Never unplug the appliance by pulling on the power cord. Always grip the plug firmly and pull straight out from the outlet. Failure to do so may damage the power cord, resulting in a risk of fire and electric shock. SAFETY INSTRUCTIONS 7 CAUTION To reduce the risk of minor or moderate injury to persons, malfunction, or damage to the product or property when using this product, follow basic precautions, including the following:

INSTALLATION Do not install the refrigerator where there may be a danger of the unit falling. The refrigerator must be properly installed in accordance with the Installation Instructions. OPERATION Do not use aerosols near the refrigerator. This appliance is intended to be used only in domestic and similar applications. Do not strike or apply excessive force to any glass surface. Do not touch glass surfaces if they are cracked or broken. Do not overfill or pack items too tightly into door bins. Doing so may cause damage to the bin or personal injury if items are removed with excessive force. Do not overfill the appliance with food. Doing so may cause personal injury or property damage. Do not hang on to or place heavy objects on the refrigerators dispenser. MAINTENANCE Do not use strong detergents like wax or thinners for cleaning. Clean with a soft cloth. Remove foreign objects (such as dust and water) off the prongs of the power plug and contact areas. Do not use a wet or damp cloth when cleaning the plug. Do not spray water directly on the inside or outside of the refrigerator. Do not clean glass shelves or covers with warm water when they are cold. They may break if exposed to sudden temperature changes. SAVE THESE INSTRUCTIONS ENGLISH PRODUCT SPECIFICATIONS 8 PRODUCT SPECIFICATIONS The appearance and specifications listed in this manual may vary due to constant product improvements. Electrical requirements: 115 V, 60 Hz Min. / Max. water pressure: 20 - 120 psi (138 - 827 kPa) Model SKSCR3001P Description Net weight Built-in, Refrigerator 452 lb (205 kg) PRODUCT OVERVIEW The images in this guide may be different from the actual components and accessories, which are subject to change by the manufacturer without prior notice for product improvement purposes. PRODUCT OVERVIEW 9 Exterior ENGLISH 10 PRODUCT OVERVIEW Interior 1 2 3 4 5 8 6 7 1 Water filter Purify water. NOTE The filter should be replaced every 6 months. See the Replacing the Water Filter section in this manual for details. 2 Control Panel Sets the refrigerator and freezer temperatures, the water filter condition and the dispenser mode. 3 LED interior lamps Light up the inside of the refrigerator. 4 Adjustable Refrigerator Shelf The refrigerator shelves are adjustable to meet individual storage needs. 5 Movable Door Bin Store chilled food or drinks. 6 Snack Pan 7 Drawer 8 Internal Water Dispenser OPERATION Before Use OPERATION 11 Clean the refrigerator. Clean the refrigerator thoroughly and wipe off all dust that accumulated during shipping. CAUTION Do not scratch the refrigerator with a sharp object or use a detergent that contains alcohol, a flammable liquid or an abrasive when removing any tape or adhesive from the refrigerator. Remove adhesive residue by wiping it off with your thumb or dish detergent. Do not peel off the model or serial number label or the technical information on the rear surface of the refrigerator. Open refrigerator doors and freezer drawers to ventilate the interior. The inside of the refrigerator may smell like plastic at first. Remove any adhesive tape from inside the refrigerator and open the refrigerator doors and the freezer drawers for ventilation. Connect the power supply. Check if the power supply is connected before use. Wait for the refrigerator to cool. Allow the refrigerator to run for at least two to three hours before putting food in it. Check the flow of cold air in the freezer compartment to ensure proper cooling. CAUTION Putting food in the refrigerator before it has cooled could cause the food to spoil, or a bad odor to remain inside the refrigerator. The refrigerator makes a loud noise after initial operation. This is normal. The volume will decrease as the temperature decreases. ENGLISH 12 PRODUCT OVERVIEW Control Panel Depending on the model, some of the following functions may not be available. Control Panel Features 1 3 4 5

* POWER 2 NOTE When the refrigerator is in the Power Saving Mode, the display remains off until a door is opened or a button is pressed. Once on, the display remains on for 20 seconds. 1 Water Filter Replace the water filter when the Replace Filter icon turns on. After replacing the water filter, press and hold the Water Filter button for three seconds to turn the icon light off. Replace the water filter approximately every six months. 2 Freezer Temperature Indicates the set temperature of the freezer compartment in Celsius (C) or Fahrenheit (F). The default freezer temperature is 0F (-18 C). Press the Freezer button repeatedly to select a new set temperature from -6 F to 8 F (-21 C to -13 C). 3 Smart Grid (On Some Models) Press the Smart Grid button to turn the Smart Grid function On/Off. When the function is on, the icon illuminates. The Smart Grid function automatically turns on when the refrigerator is connected to the Wi-Fi network. When the refrigerator is responding to a Demand Response (DR) message from the electric company, the Grid text illuminates. 4 5

* Wi-Fi (On Some Models) The Wi-Fi button, when used with the LG Smart Refrigerator smart phone app, allows the refrigerator to connect to a home Wi-Fi network. Refer to Smart Function for information on the initial setup of the application. The Wi-Fi icon shows the status of the refrigerators network connection. The icon illuminates when the refrigerator is connected to the Wi-Fi network. Press and hold the Wi-Fi button for 3 seconds to connect to the network. The icon blinks while the connection is being made, then turns on once the connection is successfully made.

* Power The Power button turns off all electrical power to the unit. Press and hold the Power button for 3 seconds to turn off the power. When the power is off, the indicator light is off. There is no need to turn off power at the circuit breaker or wall receptacle. Use this function for service or extended vacations. PRODUCT OVERVIEW 13 CAUTION Display Mode (For Store Use Only) The Display Mode disables all cooling in the freezer sections to conserve energy while on display in a retail store. When activated, OF is displayed on the control panel and the display remains on for 20 seconds. To deactivate / activate:

With either refrigerator door opened, press and hold the Refrigerator and Water Filter reset buttons at the same time for five seconds. The control panel beeps and the temperature settings display to confirm that Display Mode is deactivated. Use the same procedure to activate Display Mode. 2 and 5 SABBATH Sabbath mode is the function designated for use of the Refrigerator during Sabbath. To set the Sabbath mode on, Press and hold the Refrigerator and Power buttons for 3 seconds. Then Sb shows in the display. Sabbath mode will automatically turned off after 96 hours. To set the Sabbath mode off manually, press and hold the Refrigerator and Power buttons for 3 seconds. Sabbath mode maintains even when the electricity recovered from black-

out. Lamp and Alarm will automatically turned off when activated. Temperature is set to 37 F. (Unable to change temp while Sabbath Mode on) Even outage happens when Sabbath function is on, Sabbath function will still stay on when power comes back. ENGLISH 14 PRODUCT OVERVIEW Internal Water Dispenser CAUTION Keep children away from the dispenser. Children may play with or damage the controls. Dispenses unexpectedly, turn off the water supply and contact an SIGNATURE KITCHEN SUITE Customer Information Center. Dispenser Structure Water Nozzle Water Paddle NOTE To dispense water, push on the water paddle with a glass. Some dripping may occur after dispensing. Hold the cup beneath the dispenser for a few seconds after dispensing to catch all of the drops. Storing Food CAUTION Do not overfill or pack items too tightly into door bins. Doing so may cause damage to the bin or personal injury if items are removed with excessive force. Do not store glass containers in the freezer. Contents may expand when frozen, break the container and cause injury. NOTE If you are leaving home for a short period, like a short vacation, the refrigerator should be left on. Refrigerated foods that are able to be frozen will stay preserved longer if stored in the freezer. If you are leaving the refrigerator turned off for an extended period, remove all food and unplug the power cord. Clean the interior, and leave the door open to prevent fungi from growing in the refrigerator. Do not store food with high moisture content towards the top of the refrigerator. The moisture could come in direct contact with the cold air and freeze. Wash food before storing it in the refrigerator. Vegetables should be washed, and food packaging should be wiped down to prevent adjacent foods from being contaminated. If the refrigerator is kept in a hot and humid place, frequent opening of the door or storing a lot of vegetables in the refrigerator may cause condensation to form. Wipe off the condensation with a clean cloth or a paper towel. If the refrigerator door or freezer drawer is opened or closed too often, warm air may penetrate the refrigerator and raise its temperature. This can increase the running costs of the unit. Food Storage Tips Wrap or store food in the refrigerator in airtight and moisture-proof material unless otherwise noted. This prevents food odor and taste transfer throughout the refrigerator. For dated products, check date code to ensure freshness. Food Butter or Margarine Cheese Milk Eggs Fruit Leafy Vegetables Vegetables with skins

(carrots, peppers) Fish Leftovers How to Keep opened butter in covered dish or closed compartment. When storing an extra supply, wrap in freezer packaging and freeze. Store in original wrapping until used. Once opened, rewrap tightly in plastic wrap or aluminum foil. Wipe milk cartons. For coldest milk, place containers on an interior shelf. Store in original carton on interior shelf, not on door shelf. Do not wash or hull fruit until it is ready to be used. Sort and keep fruit in original container in a crisper, or store in completely closed paper bag on refrigerator shelf. Remove store wrapping, trim or tear off bruised and discolored areas, wash in cold water, and drain. Place in plastic bag or plastic container and store in crisper. Place in plastic bags or plastic container and store in crisper. Freeze fresh fish and shellfish if they are not being eaten the same day purchased. Eating fresh fish and shellfish the same day purchased is recommended. Cover leftovers with plastic wrap or aluminum foil, or store in plastic containers with tight lids. PRODUCT OVERVIEW 15 Drawers Use the upper compartment to store packaged frozen foods and frequently-used foods. Use the lower compartments for larger frozen foods and items stored for longer periods. The sliding drawers allow easy access and convenience of use. Removing the Drawers 1 Pull the drawer out until it stops. Empty all contents out of the drawer before removing it. 2 Lift the empty drawer slightly to remove it from the support. CAUTION The drawers are heavy. Always use two hands when removing or assembling the drawers to avoid product damage or personal injury. Always empty drawers before removing them. Always open the doors completely before removing or assembling the drawers. ENGLISH 16 PRODUCT OVERVIEW Assembling the Drawer 1 Pull out the drawer support until it stops. Angle the drawer into the space and set it on the support. Removing the Drawer Support 1 Press the levers on either side of the drawer support. 2 Slide the drawer back until it lowers into place on the support. Close the drawer. 2 Keeping both levers pressed, lift the drawer support slightly and remove it from the rail system. CAUTION The drawers are heavy. Always use two hands when removing or assembling the drawers to avoid product damage or personal injury. Always empty drawers before removing or assembling them. Always open the freezer doors completely before removing or assembling the drawers. Assembling the Drawer Support 1 Pull both drawer rails out until they stop. 2 Line up the bottom edges on the sides of the drawer support with the groove in each rail and then lower the support until it clicks into place. Door Bins To remove the door bins, hold the bin with both hands and lift up to remove it. PRODUCT OVERVIEW 17 Adjusting the Shelves The shelves in the refrigerator are adjustable to meet individual storage needs. Your model may have full or split shelves. Adjusting the shelves to fit items of different heights will make finding the exact item you want easier. Detaching the Shelf 1 Tilt up the front of the shelf and then lift the shelf straight up. To assembly the door bin, align both sides of the bin with the guides and push the bin down until it snaps into place. 2 Pull the shelf out. To adjust the location of bin, tilt the bin up at the front and sliding it up or down along the door to the placement you desire. Assembling the Shelf 1 Tilt the front of the shelf up and guide the shelf hooks into the slots at a desired height. 2 Lower the front of the shelf so that the hooks drop into the slots. CAUTION Make sure that shelves are level from one side to the other. Failure to do so may result in the shelf falling or spilled food. Do not clean glass shelves with warm water while they are cold. Shelves may break if exposed to sudden temperature changes or impact. Glass shelves are heavy. Use special care when removing them. ENGLISH 18 PRODUCT OVERVIEW Adjusting the Snack Pan The Snack Pan in the refrigerator are adjustable to meet individual storage needs. Your model may have full or split shelves. Adjusting the Snack Pan to fit items of different heights will make finding the exact item you want easier. Removing the Drawer 1 Pull the drawer out until it stops. Empty all contents out of the drawer before removing it. Detaching the Snack Pan 1 Tilt up the front of the shelf and then lift the Snack Pan straight up. 2 Pull the Snack Pan out. 2 Lift the empty drawer slightly to remove it from the support. Assembling the Snack Pan 1 Tilt the front of the Snack Pan up and guide the shelf hooks into the slots at a desired height. 2 Lower the front of the Snack Pan so that the hooks drop into the slots. CAUTION Make sure that Snack Pan is level from one side to the other. Failure to do so may result in the Snack Pan falling or spilled food. Do not clean glass Snack Pan with warm water while they are cold. Snack Pan may break if exposed to sudden temperature changes or impact. Snack Pan is heavy. Use special care when removing it. SMART FUNCTIONS SIGNATURE KITCHEN SUITE Application The SIGNATURE KITCHEN SUITE application allows you to communicate with the appliance using a smartphone. Things to Check before SIGNATURE KITCHEN SUITE Application 1 Check the distance between the appliance and the wireless router (Wi-Fi network). If the distance between the appliance and the wireless router is too far, the signal strength becomes weak. It may take a long time to register or installation may fail. 2 Turn off the Mobile data or Cellular Data on your smartphone. For iPhones, turn data off by going to Settings Cellular Cellular Data. 3 Connect your smartphone to the wireless router. SMART FUNCTIONS 19 NOTE To verify the Wi-Fi connection, check that Wi-Fi icon on the control panel is lit. The appliance supports 2.4 GHz Wi-Fi networks only. To check your network frequency, contact your Internet service provider or refer to your wireless router manual. SIGNATURE KITCHEN SUITE application is not responsible for any network connection problems or any faults, malfunctions, or errors caused by network connection. The surrounding wireless environment can make the wireless network service run slowly. If the appliance is having trouble connecting to the Wi-Fi network, it may be too far from the router. Purchase a Wi-Fi repeater (range extender) to improve the Wi-Fi signal strength. The network connection may not work properly depending on the Internet service provider. The Wi-Fi connection may not connect or may be interrupted because of the home network environment. The appliance cannot be registered due to problems with the wireless signal transmission. Unplug the appliance and wait about a minute before trying again. If the firewall on your wireless router is enabled, disable the firewall or add an exception to it. The wireless network name (SSID) should be a combination of English letters and numbers. (Do not use special characters.) Smartphone user interface (UI) may vary depending on the mobile operating system (OS) and the manufacturer. If the security protocol of the router is set to WEP, you may fail to set up the network. Please change it to other security protocols (WPA2 is recommended) and register the product again. ENGLISH NOTE If you change your wireless router, your Internet service provider or your password after registering the appliance, please delete it from the SIGNATURE KITCHEN SUITE application Settings Edit Product and register again. This information is current at the time of publication. The application is subject to change for product improvement purposes without notice to users. 20 SMART FUNCTIONS Installing SIGNATURE KITCHEN SUITE Application Search for the SIGNATURE KITCHEN SUITE application from the Google Play Store or Apple App Store on a smart phone. Follow instructions to download and install the application. NOTE If you choose the simple login to access the SIGNATURE KITCHEN SUITE application, you must go through the appliance registration process each time you change your smartphone or reinstall the application. SIGNATURE KITCHEN SUITE Application Features Manage Food This feature helps track items in the refrigerator and freezer, sends alerts when items are near their use by dates, generates grocery lists, and links to related recipes. Energy Monitoring This feature keeps track of the refrigerators power consumption and the number of door openings. Remote Control Control the Refrigerator Temperature, Fresh Air Filter and Ice Plus from the smart phone app. Push Messages If the door remains open for more than ten minutes, you will receive a push message. When Ice Plus is finished, you will receive a push message. Smart Diagnosis This function provides useful information for diagnosing and solving issues with the appliance based on the pattern of use. Settings Allows you to set various options on the refrigerator and in the application. Smart Grid Function When the refrigerator operates in Smart Grid mode, the Smart Refrigerator function can control energy usage or delay the operation of some functions to save energy during peak usage periods. You can override the Smart Grid function any time

(using the Smart Grid button or application). To use the Smart Grid function, you need to register your appliance with your electric utility company. Smart Grid Application Features Smart Saving_Demand Response You can lower energy usage based on Demand Response (DR) signals from the utility company. If the refrigerator is operating in Smart Saving mode according to the DR signal, you can see a pop up. Seasonal Energy Savings Lower energy usage based on time period. Using the Smart Grid Function This feature responds to notification events from your utility company to run high energy consuming tasks during off-peak periods when demand is lower. These notification events are known as Demand Response signals. If the refrigerator receives a Demand Response signal from the utility company, the refrigerator will turn on the Grid LED on the refrigerator display and control its power consumption according to the signal. The refrigerator will respond to the signals received from the utility company as long as product performance is maintained. If the refrigerator receives a Demand Response signal, the refrigerator will operate in Delay Appliance Load (DAL) or Temporary Appliance Load Reduction

(TALR) mode. Delay Appliance Load (DAL) The refrigerator responds to a DAL signal by providing a moderate load reduction for the duration of the delay period. This mode controls functions that consume a lot of energy such as adjusting the cooling system, running the defrost cycle, and making ice. When the refrigerator operates in DAL mode, the Grid LED is illuminated on the refrigerator display. DAL mode is automatically deactivated after the period stipulated by the DAL signal (max. 4 hours) or when you override the Smart Grid function. SMART FUNCTIONS 21 Temporary Appliance Load Reduction (TALR) The refrigerator responds to a TALR signal by aggressively reducing the load for a short time period, typically 10 minutes. This mode reduces energy consumption by stopping the compressor and controlling the functions that consume a lot of energy such as the defrost cycle and fan. When the refrigerator operates in TALR mode, the Grid LED is illuminated on the refrigerator display. TALR mode is automatically deactivated after the received duration (max. 10 minutes), or when you override the Smart Grid function. The mode is immediately deactivated and the refrigerator returns to its normal state when the door is opened or closed, or the dispenser is used. Override Smart Grid Mode To ignore the Demand Response signal from the utility company and override the Smart Grid function, push the Smart Grid button while the refrigerator is in Smart Grid mode. When you override the Smart Grid function, the refrigerator ignores the Demand Response signal and is no longer controlled by the utility company until the next Demand Response signal is sent. You can also override the Smart Grid function using the smart phone app. SIGNATURE KITCHEN SUITE Open API You can manage Smart Grid features for the SIGNATURE KITCHEN SUITE Refriferator. Please check the detailed specifications on the notice page on www.thesignaturekitchen.com. API list Demand Response Send demand response signal Power Saving Set saving mode Get schedule of DR/Delay Defrost Energy Monitoring Get door open event Get energy consumption Delay Defrost Capability Insert a delay defrost schedule event Update a delay defrost schedule event Delete a delay defrost schedule event Get the delay defrost schedule ENGLISH 22 SMART FUNCTIONS Smart Diagnosis Function Should you experience any problems with the appliance, it has the capability of transmitting data via your telephone to the SIGNATURE KITCHEN SUITE Information Center. NFC or Wi-Fi equipped models can also transmit data to a smartphone using the SIGNATURE KITCHEN SUITE application. Smart Diagnosis through the Customer Information Center This method allows you to speak directly to our trained specialists. The specialist records the data transmitted from the appliance and uses it to analyze the issue, providing a fast and effective diagnosis. 1 Call the SIGNATURE KITCHEN SUITE Customer Information Center at:

(U.S.A) 1-855-790-6655 2 Open the refrigerator door. 3 Hold the mouthpiece of your phone in front of the speaker that is located on the filter cover of the refrigerator, when instructed to do so by the call center. 4 Press and hold the Freezer button for three seconds while continuing to hold your phone to the speaker.

* POWER 5 After you hear three beeps, release the Freezer button. 6 Keep the phone in place until the tone transmission has finished. The display will count down the time. Once the countdown is over and the tones have stopped, resume your conversation with the specialist, who will then be able to assist you in using the information transmitted for analysis. NOTE For best results, do not move the phone while the tones are being transmitted. If the call center agent is not able to get an accurate recording of the data, you may be asked to try again. The Smart Diagnosis function depends on the local call quality. Bad call quality may result in poor data transmission from your phone to the call center, which could cause Smart Diagnosis to malfunction. Smart Diagnosis Use the Smart Diagnosis feature in the SIGNATURE KITCHEN SUITE application for help diagnosing issues with the appliance without the assistance of the SIGNATURE KITCHEN SUITE Customer Information Center. Follow the instructions in the SIGNATURE KITCHEN SUITE application to perform a Smart Diagnosis using your smartphone. NOTE Smart Diagnosis cannot be activated unless the appliance can be turned on using the Power button. If the appliance cannot be turned on, troubleshooting must be done without using Smart Diagnosis. FCC Notice The following notice covers the transmitter module contained in this product. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules and also Part 18 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15, Part 18 of the FCC Rules. Operation is subject to the following two conditions:

1) this device may not cause harmful interference and 2) this device must accept any interference received, including interference that may cause undesired operation of the device. Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. SMART FUNCTIONS 23 FCC RF Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 cm (7.8 inches) between the antenna and your body. Users must follow the specific operating instructions for satisfying RF exposure compliance. Industry Canada Statement (For transmitter module contained in this product) This device complies with Industry Canadas applicable licence- exempt RSSs. Operation is subject to the following two conditions:

1) This device may not cause interference; and 2) This device must accept any interference, including interference that may cause undesired operation of the device. Industry Canada ICES-001 Compliance Label: CAN ICES-1/NMB-1 IC Radiation Exposure Statement This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm (7.8 inches) between the antenna and your body. NOTE The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment. Wireless LAN module Specifications Model Frequency Range Output Power

(Max) LCW-003 2412 MHz - 2462 MHz IEEE 802.11b: 17.56 dBm IEEE 802.11g: 25.53 dBm IEEE 802.11n: 25.29 dBm ENGLISH 24 SMART FUNCTIONS Wireless Power Transfer Specifications Frequency Rated voltage Transmission power Transmission mode 330 kHz ~ 370 kHz DC 12 V Less than and equal to 3 W per shelf Electromagnetic induction Transmitter Receiver NOTE Foreign objects and dirt between the right side of shelf and the inner cabinet wall could prevent the shelf light from turning on. The shelf light turns on when the door is opened. The shelf light turns off after seven minutes or when the door is closed. MAINTENANCE 25 Inside Walls Allow freezer to warm up so the cloth will not stick. To help remove odors, wash the inside of the refrigerator with a mixture of baking soda and warm water. Mix 2 tablespoons of baking soda to 1 quart of water (26 g soda to 1 liter water.) Be sure the baking soda is completely dissolved so it does not scratch the surfaces of the refrigerator. Door Liners and Gaskets Use a clean sponge or soft cloth and a mild detergent in warm water. Do not use cleaning waxes, concentrated etergents, bleaches, or cleaners containing petroleum on plastic refrigerator parts. Plastic Parts (covers and panels) Use a clean sponge or soft cloth and a mild detergent in warm water. Do not use glass cleaners, abrasive cleansers, or flammable fluids. These can scratch or damage the material. MAINTENANCE Cleaning WARNING Use non-flammable cleaner. Failure to do so can result in fire, explosion, or death. CAUTION Do not use an abrasive cloth or sponge when cleaning the interior and exterior of the refrigerator. Do not place your hand on the bottom surface of the refrigerator when opening and closing the doors. When lifting the hinge free of the latch, be careful that the door does not fall forward. General Cleaning Tips Both the refrigerator and freezer sections defrost automatically; however, clean both sections once a month to prevent odors. Wipe up spills immediately. Unplug the refrigerator or disconnect power before cleaning. Remove all removable parts, such as shelves. Use a clean sponge or soft cloth and a mild detergent in warm water. Do not use abrasive or harsh cleaners. Hand wash, rinse and dry all surfaces thoroughly. When cleaning the inside or outside of the appliance, do not wipe it with a rough brush, toothpaste, or flammable materials. Do not use cleaning agents containing flammable substances. This may cause discoloration or damage to the appliance. Flammable substances: alcohol (ethanol, methanol, isopropyl alcohol, isobutyl alcohol, etc.), thinner, bleach, benzene, flammable liquid, abrasive, etc. ENGLISH 26 MAINTENANCE Replacing the Water Filter Replace the Water Filter :

Approximately every six months. When the Replace Filter icon turns on. When the water dispenser output decreases. 2 Put the cap on water filter, then grasp and rotate it counterclockwise to remove the water filter from the filter head. Cap 1 Remove the old water filter. Push and open up the Water Filter cover on ther right top of freezer. NOTE Replacing the water filter causes a small amount of water (around 1 oz. or 25 cc) to drain. Wrap a cloth around the front end of the water filter cover to collect any leaking water. Hold the water filter upright, once it is removed, to prevent any remaining water from spilling out of the water filter. 3 Replace with a new water filter. Take the new water filter out of its packing and remove the protective cover from the o-rings. Put the cap on new water filter, then push it into the manifold hole until it stops. 4 Grasp and rotate cap clockwise until it stops. Put the cap on the right side of Water Filter. 5 After the water filter is replaced, dispense 2.5 gallons of water (flush for approximately 5 minutes) to remove trapped air and contaminants from the system. NOTE Do not dispense the entire 2.5 gallon amount continuously. Press and release the dispenser pad for cycles of 30 seconds ON and 60 seconds OFF. Keep the water filter bypass plug. You MUST use the water filter bypass plug when a replacement water filter cartridge is not available. 6 After changing the filter, press and hold the Water Filter Reset button for three seconds to reset the indicator light. MAINTENANCE 27

* POWER CAUTION DO NOT operate the refrigerator without a water filter or water filter bypass plug installed. NOTE To purchase a replacement water filter:

Visit your local dealer or distributor Web : Find Parts & Accessories from Support section of thesignaturekitchen.com Call : 1-855-790-6655 (USA) Use replacement cartridge :

For further assistance, call:

1-855-790-6655 (USA) Use replacement cartridge:

LT1000P (ADQ74793501) LT1000PC (ADQ74793504) LT1000PCS (ADQ74793505) ENGLISH 28 MAINTENANCE Performance Data Sheet Model: LT1000P/PC/PCS The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for water leaving the system as specified in NSF/ANSI Standard 42 and Standard 53. NSF System Trade Name Code : MDJ64844601 System tested and certified by NSF International against NSF/ANSI Standard 42 and Standard 53 for the reduction of substances listed below. Average Influent Challenge NSF specified Challenge Concentration Avg %

Reduction Average Product Water Concentration Max Permissible Product Water Concentration NSF Reduction Requirements 2.0 g/L 2.0 g/L 10% >97.5%

0.050 g/L N/A 50.00%

substance Reduction Chlorine Taste and Odor Nominal Particulate Class I, , 0.5 to < 1.0 m 12,000,000 pts/mL Asbestos 180 MFL Atrazine 8.5 g/L Benzene 15.0 g/L Carbofuran 74.0 g/L Lindane 1.9 g/L P-Dichlorobenzene 230.0 g/L 2,4-D 210.0 g/L Lead pH @6.5 140.0 g/L Lead pH @8.5 150.0 g/L Mercury @ pH 6.5 5.9 g/L

(Continued on next page) At least 10,000 particles/mL 107 to 108 MFL; fibers greater than 10 g/Lin length 9.0 g/L 10%

15.0 g/L 10%

80.0 g/L 10%

2.0 g/L 10%

225.0 g/L 10%

210.0 g/L 10%

150.0 g/L 10%

150.0 g/L 10%

6.0 g/L 10%

99.80%

24,000 pts/ml N/A 85.00%

>99.00%

< 1 MFL N/A 99.00%

>94.10%

0.500 g/L 3.0 g/L

>96.60%

0.510 g/L 5.0 g/L 98.30%

1.258 g/L 40 g/L

>99.00%

0.019 g/L 0.2 g/L

>99.80%

0.460 g/L 75.0 g/L

>99.90%

0.210 g/L 70.0 g/L 99.60%

0.560 g/L 10.0 g/L

>99.70%

<0.500 g/L 10.0 g/L 91.00%

0.531 g/L 2.0 g/L NA NA NA NA NA NA NA NA NA substance Reduction Average Influent Challenge NSF specified Challenge Concentration Avg %

Reduction Average Product Water Concentration Max Permissible Product Water Concentration NSF Reduction Requirements MAINTENANCE 29 6.0 g/L 10%

92.5%

0.420 g/L 2.0 g/L NA Minimum 50,000 cysts/L >99.99%

200 40%

ng/L

> 95.50%

10 cysts/L N/A 99.95%

10.80 ng/L 30 ng/L Mercury @ pH 8.5 Cyst*

5.6 g/L 100,000 cysts/L Atenolol 240 ng/L Carbamazepine 1600 ng/L DEET 1600 ng/L Trimethoprim 170 ng/L Linuron 160 ng/L Phenytoin 200 ng/L Ibuprofen 400 ng/L Naproxen 140 ng/L Estrone 120 ng/L Bisphenol A 2000 ng/L Nonyl Phenol 1600 ng/L 1400 40%

ng/L 1400 40%

ng/L 140 40%

ng/L 140 40%

ng/L 200 40%

ng/L 400 40%

ng/L 140 40%

ng/L 140 40%

ng/L 2000 40%

ng/L 1400 40%

ng/L 98.40%

25.60 ng/L 200 ng/L 97.10%

46.40 ng/L 200 ng/L

>96.80%

5.44 ng/L 20 ng/L

>96.60%

5.44 ng/L 20 ng/L

>94.80%

10.40 ng/L 30 ng/L

>94.50%

22.00 ng/L 60 ng/L

>96.10%

5.46 ng/L 20 ng/L

>96.10%

4.68 ng/L 20 ng/L

>98.90%

22.00 ng/L 300 ng/L

>97.10%

46.40 ng/L 200 ng/L NA NA NA NA NA NA NA NA NA NA NA Based on the use of Cryptosporidium parvum oocysts. ENGLISH 30 MAINTENANCE Application Guidelines/Water Supply Parameters Service Flow 0.5 gpm (1.9 lpm) Water Supply Water Pressure Water Temperature Capacity Community or Private Well -

Potable Water 20 120 psi (138 827 kPa) 33 F 100 F (0.6 C 37.8 C) 200 gallons (757 liters) It is essential that the manufacturers recommended installation, maintenance and filter replacement requirements be carried out for the product to perform as advertised. NOTE While the testing was performed under standard laboratory conditions, actual performance may vary. Replacement Cartridge:

LT1000P (ADQ74793501) LT1000PC (ADQ74793504) LT1000PCS (ADQ74793505) For replacement filters, visit your local dealer or distributor or search under water filters on the lg.com website. For further assistance, the LG Electronics Customer Information Center is open 24 hours a day/7 days a week. USA: 1-800-243-0000C anada: 1-888-542-2623 LG is a trademark of LG corp. NSF is a trademark of NSF International. Manufactured for LG Electronics by:

LG Electronics, INC 170, Sungsanpaechoungro, Seongsan-gu, Gyeongsangnam-do, THE REPUBLIC OF KOREA WARNING To reduce the risk associated with choking:

Do not allow children under 3 years of age to have access to small parts during the installation of this product. To reduce the risk associated with the ingestion of contaminants:

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Systems certified for cyst reduction may be used on disinfected water that may contain filterable cysts. EPA Establishment # 070595-MEX-001 CAUTION To reduce the risk associated with property damage due to water leakage:

Read and follow Use Instructions before installation and use of this system. Installation and use MUST comply with all state and local plumbing codes. Do not install if water pressure exceeds 120 psi

(827 kPa). If your water pressure exceeds 80 psi, you must install a pressure limiting valve. Contact a plumber if uncertain how to check your water pressure. Do not install where water hammer conditions may occur. If water hammer conditions exist you must install a water hammer arrester. Contact a plumbing professional if you are uncertain how to check for this condition. Do not install on hot water supply lines. The maximum operating water temperature of this filter system is 100 F (37.8 C). Protect filter from freezing. Drain filter when temperatures drop below 40 F (4.4 C). The disposable filter cartridge MUST be replaced every 6 months, at the rated capacity or if a noticeable reduction in flow rate occurs. Protect from freezing, remove filter cartridge when temperatures are expected to drop below 33 F. Do not install systems in areas where ambient temperatures may go above 110 F (43.3 C). Where a backflow prevention device is installed on a water system, a device for controlling pressure due to thermal expansion must be installed. Ensure all tubing and fittings are secure and free of leaks. TROUBLESHOOTING 31 TROUBLESHOOTING FAQs: Frequently Asked Questions Q:

What are the best temperature settings for my freezer?

A:

Q:

A:

Q:

A:

Q:

A:

Q:

A:

The default setting for the freezer is 0 Fahrenheit (-18 Celsius). Adjust these settings as necessary to keep food at desired temperatures. Ice cream should be firm and ice cubes should not melt in the freezer. To switch the display from Fahrenheit to Celsius, press Freezer button first to wake the display then press and hold the Freezer and Smart Grid buttons until you hear a beep and the settings in the display change. How do I set the freezer temperatures?

Continually press the Freezer button on the control panel until the desired temperature appears. The numbers will cycle from highest to lowest and then return to the highest again with continuous pressing. Why do I hear a buzzing noise from my freezer periodically?

This may happen if you do not have a water source attached to your freezer and the icemaker is turned on. If you do not have a water source attached to freezer you should turn the icemaker off on control panel. Why does the icemaker tray look crooked?

This is a normal part of the icemaker cycle. The icemaker tray may appear level or with a slight tilt. The change in position is to assist in the freezing process. My refrigerator is powered on and the controls are working, but its not cooling and the display shows OF (see below). What is wrong?

The refrigerator is in Demo Mode. This mode disables cooling to save energy while the appliance is on display in a store. To restore normal operation, press Freezer button first to wake the display then press and hold the Freezer and Water Filter Reset buttons until you hear a beep and temperature setting appear on display. Use the same procedure to return the refrigerator to Demo Mode, if desired.

* POWER ENGLISH 32 TROUBLESHOOTING Before Calling for Service Review this section before calling for service; doing so will save you both time and money. Cooling Problem Possible Cause Solutions The refrigerator control is set to OFF (some models). Refrigerator is set to Demo Mode. Refrigerator and Freezer section are not cooling. Refrigerator is in the defrost cycle. Refrigerator was recently installed. Refrigerator was recently relocated. Refrigerator is replacing an older model. Refrigerator was recently plugged in or power restored. The door is opened often or a large amount of food / hot food was added. Doors are not closed completely. Refrigerator is installed in a hot location. Cooling system runs too much. Turn the control ON. Refer to the Setting the Controls section for proper temperature settings. Demo Mode allows the lights and control display to work normally while disabling cooling, to save energy while the refrigerator is on the showroom floor. See the FAQs section of this manual for instructions on how to disable Demo Mode. During the defrost cycle, the temperature of each compartment may rise slightly. Wait 30 minutes and confirm the proper temperature has been restored once the defrost cycle has completed. It may take up to 24 hours for each compartment to reach the desired temperature. If the refrigerator was stored for a long period of time or moved on its side, it is necessary for the refrigerator to stand upright for 24 hours before connecting it to power. Modern refrigerators require more operating time but use less energy due to more efficient technology. The refrigerator will take up to 24 hours to cool completely. Adding food and opening the door warms the refrigerator, requiring the compressor to run longer in order to cool the refrigerator back down. In order to conserve energy, try to get everything you need out of the refrigerator at once, keep food organized so it is easy to find, and close the door as soon as the food is removed. (Refer to the Food Storage Guide.) Firmly push the doors shut. If they will not shut all the way, the "Doors will not close correctly or pop open"

section. The compressor will run longer under warm conditions. At normal room temperatures (70 F) expect your compressor to run about 40 % to 80 % of the time. Under warmer conditions, expect it to run even more often. The refrigerator should not be operated above 110 F. Cooling Problem Possible Cause Solutions TROUBLESHOOTING 33 Doors are opened often or for long periods of time. Doors are not closed correctly. Weather is humid. Defrost cycle recently completed. Food is not packaged correctly. Food with high water content was placed near an air vent. Refrigerator temperature control is set incorrectly. Refrigerator is installed in a cold location. Refrigerator was recently installed. The air vents are blocked. Cold air circulates from the freezer to the fresh food section and back again through air vents in the wall dividing the two sections. When the doors are opened often or for long periods of time, warm, humid air enters the compartment. This raises the temperature and moisture level within the compartment. To lessen the effect, reduce the frequency and duration of door openings. See the "Doors will not close correctly or pop open"

section. Humid weather allows additional moisture to enter the compartments when the doors are opened leading to condensation or frost. Maintaining a reasonable level of humidity in the home will help to control the amount of moisture that can enter the compartments. During the defrost cycle, the temperature of each compartment may rise slightly and condensation may form on the back wall. Wait 30 minutes and confirm that the proper temperature has been restored once the defrost cycle has completed. Food stored uncovered or unwrapped, and damp containers can lead to moisture accumulation within each compartment. Wipe all containers dry and store food in sealed packaging to prevent condensation and frost. Rearrange items with high water content away from air vents. If the temperature is too cold, adjust the control one increment at a time and wait for the temperature to stabilize. Refer to the Control Panel section for more information. When the refrigerator is operated in temperature below 41F (5C), food can freeze in the refrigerator compartment. The refrigerator should not be operated in temperature below 55F (13C). It may take up to 24 hours for each compartment to reach the desired temperature. Locate air vents by using your hand to sense airflow and move all packages that block vents and restrict airflow. Rearrange items to allow air to flow throughout the compartment. Interior moisture buildup. Food is freezing in the refrigerator compartment. Refrigerator or Freezer section is too warm. ENGLISH 34 TROUBLESHOOTING Cooling/Ice & Water Problem Possible Cause Solutions Refrigerator or Freezer section is too warm. Doors are opened often or for long periods of time. Unit is installed in a hot location. A large amount of food or hot food was added to either compartment. Doors not closed correctly. Temperature control is not set correctly. Defrost cycle has recently completed. Refrigerator or Freezer section is too cold. Incorrect temperature control settings. Frost or ice crystals form on frozen food (inside of sealed package). Condensation from food with a high water content has frozen inside of the food package. Food has been left in the freezer for a long period of time. Frost or ice crystals form on frozen food

(outside of package). Door is opened frequently or for long periods of time. When the doors are opened often or for long periods of time, warm, humid air enters the compartment. This raises the temperature and moisture level within the compartment. To lessen the effect, reduce the frequency and duration of door openings. The refrigerator should not be operated in temperatures above 110 F. Adding food warms the compartment requiring the cooling system to run. Allowing hot food to cool to room temperature before putting it in the refrigerator will reduce this effect. See the Doors will not close correctly or pop open section in Parts & Features Troubleshooting. If the temperature is too warm, adjust the control one increment at a time and wait for the temperature to stabilize. During the defrost cycle, the temperature of each compartment may rise slightly and condensation may form on the back wall. Wait 30 minutes and confirm the proper temperature has been restored once the defrost cycle has completed. If the temperature is too cold, adjust the control one increment at a time and wait for the temperature to stabilize. Refer to the Control Panel for more information. This is normal for food items with a high water content. Do not store food items with high water content in the freezer for a long period of time. When the doors are opened often or for long periods of time, warm, humid air enters the compartment. This raises the temperature and moisture level within the compartment. Increased moisture will lead to frost and condensation. To lessen the effect, reduce the frequency and duration of door openings. Door is not closing properly. Refer to the Doors will not close correctly or pop open section in the Troubleshooting section. Ice & Water Problem Possible Cause Solutions TROUBLESHOOTING 35 Demand exceeds ice storage capacity. House water supply is not connected, valve is not turned on fully, or valve is clogged. Water filter has been exhausted. Low house water supply pressure. Icemaker is not making enough ice. Reverse Osmosis filtration system is used. Tubing connecting refrigerator to house supply valve is kinked. Doors are opened often or for long periods of time. Doors are not closed completely. The temperature setting for the freezer is too warm. Refrigerator was recently installed or icemaker recently connected. Icemaker not turned on. Icemaker is not making ice The icemaker will produce approximately 70-184 cubes in a 24 hour period. Connect the refrigerator to a cold water supply with adequate pressure and turn the water shutoff valve fully open. If the problem persists, it may be necessary to contact a plumber. Replacing the water filter is recommended:

Approximately every six months. When the water filter indicator turns on. When the water dispenser output decreases. When the ice cubes are smaller than normal. The water pressure must be between 20 and 120 psi on models without a water filter and between 40 and 120 psi on models with a water filter. If the problem persists, it may be necessary to contact a plumber. Reverse osmosis filtration systems can reduce the water pressure below the minimum amount and result in icemaker issues. (Refer to the Connecting the Water Line section.) The tubing can kink when the refrigerator is moved during installation or cleaning resulting in reduced water flow. Straighten or repair the water supply line and arrange it to prevent future kinks. If the doors of the unit are opened often, ambient air will warm the refrigerator which will prevent the unit from maintaining the set temperature. Lowering the refrigerator temperature can help, as well as not opening the doors as frequently. If the doors are not properly closed, ice production will be affected. See the "Doors will not close correctly or pop open" section in Parts & Features Troubleshooting for more information. The recommended temperature for the freezer compartment for normal ice production is 0F. If the freezer temperature is warmer, ice production will be affected. It may take up to 24 hours for each compartment to reach the desired temperature and for the icemaker to begin making ice. Locate the icemaker ON/OFF and confirm that it is turned on. ENGLISH 36 TROUBLESHOOTING Ice & Water Problem Possible Cause Solutions Icemaker is not making ice Ice has bad taste or odor. The ice detecting sensor is obstructed. The refrigerator is not connected to a water supply or the supply shutoff valve is not turned on. Icemaker shutoff (arm or sensor) obstructed. Reverse osmosis water filtration system is connected to your cold water supply. Water supply contains minerals such as sulfur. Icemaker was recently installed. The food has not been stored properly in either compartment. The interior of the refrigerator needs to be cleaned. The ice storage bin needs to be cleaned. Icemaker is making too much ice. Icemaker shutoff (arm/

sensor) is obstructed. Foreign substances or frost on the ice-detecting sensor can interrupt ice production. Make sure that the sensor area is clean at all times for proper operation. Connect the refrigerator to the water supply and turn the water shutoff valve fully open. If your icemaker is equipped with an ice shutoff arm, make sure that the arm moves freely. If your icemaker is equipped with the electronic ice shutoff sensor, make sure that there is a clear path between the two sensors. Reverse osmosis filtration systems can reduce the water pressure below the minimum amount and result in icemaker issues. (Refer to the Connecting the Water Line section.) A water filter may need to be installed to eliminate taste and odor problems. NOTE: In some cases, a filter may not help. It may not be possible to remove all minerals/odor/taste in all water supplies. Ice that has been stored for too long will shrink, become cloudy, and may develop a stale taste. Throw away old ice and make a new supply. Rewrap the food. Odors may migrate to the ice if food is not wrapped properly. See the Maintenance section for more information. Empty and wash the bin (discard old cubes). Make sure that the bin is completely dry before reinstalling it. Empty the ice bin. If your icemaker is equipped with an ice shutoff arm, make sure that the arm moves freely. If your icemaker is equipped with the electronic ice shutoff sensor, make sure that there is a clear path between the two sensors. Reinstall the ice bin and wait 24 hours to confirm proper operation. TROUBLESHOOTING 37 Parts & Features Problem Possible Cause Solutions Food packages are blocking the door open. Ice bin, crisper cover, pans, shelves, door bins, or baskets are out of position. The doors were removed during product installation and not properly replaced. Refrigerator is not leveled properly. The gaskets are dirty or sticky. Door was recently closed. LED interior lighting failure. Rearrange food containers to clear the door and door shelves. Push bins all the way in and put crisper cover, pans, shelves and baskets into their correct positions. See the Operation section for more information. Remove and replace the doors according to the Removing and Replacing Refrigerator Handles and Doors section. See Door Alignment in the Refrigeration Installation section to level refrigerator. Clean the gaskets and the surfaces that they touch. Rub a thin coat of appliance polish or kitchen wax on the gaskets after cleaning. When you open the door, warmer air enters the refrigerator. As the warm air cools, it can create a vacuum. If the door is hard to open, wait one minute to allow the air pressure to equalize, then see if it opens more easily. The refrigerator compartment lamp is LED interior lighting, and service should be performed by a qualified technician. The refrigerator is located near a fire source, such as a fireplace, chimney, or candle. Make sure that the refrigerator is not located near a fire source, such as a fireplace, chimney or candle. Doors will not close correctly or pop open. Doors are difficult to open. Lights do not work. The interior of the refrigerator is covered with dust or soot. ENGLISH 38 TROUBLESHOOTING Noises Problem Possible Cause Solutions Clicking Rattling Whooshing Gurgling Popping Sizzling Vibrating Dripping Pulsating or high-

pitched sound The defrost control will click when the automatic defrost cycle begins and ends. The thermostat control (or refrigerator control on some models) will also click when cycling on and off. Rattling noises may come from the flow of refrigerant, the water line on the back of the unit, or items stored on top of or around the refrigerator. Refrigerator is not resting solidly on the floor. Refrigerator with linear compressor was jarred while running. Evaporator fan motor is circulating air through the refrigerator and freezer compartments. Air is being forced over the condenser by the condenser fan. Refrigerant flowing through the cooling system. Contraction and expansion of the inside walls due to changes in temperature. Water dripping on the defrost heater during a defrost cycle. If the side or back of the refrigerator is touching a cabinet or wall, some of the normal vibrations may make an audible sound. Water running into the drain pan during the defrost cycle. Your refrigerator is designed to run more efficiently to keep your food items at the desired temperature. The high efficiency compressor may cause your new refrigerator to run longer than your old one, but it is still more energy efficient than previous models. While the refrigerator is running, it is normal to hear a pulsating or high-pitched sound. Normal Operation Normal Operation Floor is weak or uneven or leveling legs need to be adjusted. See the Leveling and Door Alignment section. Normal Operation Normal Operation Normal Operation Normal Operation Normal Operation Normal Operation To eliminate the noise, make sure that the sides and back cannot vibrate against any wall or cabinet. Normal Operation Normal Operation Wi-Fi Network Problem Possible Cause Solutions TROUBLESHOOTING 39 Your home appliance and smartphone is not connected to the Wi-Fi network. The password for the Wi-Fi that you are trying to connect to is incorrect. Mobile data for your smartphone is turned on. The wireless network name

(SSID) is set incorrectly. The router frequency is not 2.4 GHz. The distance between the appliance and the router is too far. Find the Wi-Fi network connected to your smartphone and remove it, then register your appliance on SIGNATURE KITCHEN SUITE application. Turn off the Mobile data of your smartphone and register the appliance using the Wi-Fi network. The wireless network name (SSID) should be a combination of English letters and numbers. (Do not use special characters.) Only a 2.4 GHz router frequency is supported. Set the wireless router to 2.4 GHz and connect the appliance to the wireless router. To check the router frequency, check with your Internet service provider or the router manufacturer. If the distance between the appliance and the router is too far, the signal may be weak and the connection may not be configured correctly. Move the location of the router so that it is closer to the appliance. ENGLISH 40 WARRANTY SIGNATURE KITCHEN SUITE REFRIGERATOR LIMITED WARRANTY - U.S.A Should your Signature Kitchen Suite Refrigerator ("Product") fail due to a defect in materials or workmanship under normal home use, during the warranty period set forth below, Signature Kitchen Suite will at its option repair or replace the product. This limited warranty is valid only to the original retail purchaser of the product and applies only when purchased and used within the United States including U.S. Territories. Proof of original retail purchase is required to obtain warranty service under this limited warranty. WARRANTY PERIOD Refrigerator Three (3) years from the date of original retail purchase Parts and Labor (internal/

functional parts only) Sealed System

(Condenser, Dryer, Connecting Tube and Evaporator) Seven (7) years from the Three (3) years from the date of original retail date of original retail purchase purchase Parts only Parts and Labor

(Consumer will be charged for labor) Linear Compressor Ten (10) years from the date of original retail purchase Part only

(Consumer will be charged for labor) Noises associated with normal operation and failure to follow instructions found in the use and care and installation guides or operating the unit in an unsuitable environment will not be covered under this warranty. Replacement products and parts are warranted for the remaining portion of the original warranty period or ninety (90) days, whichever is greater. Replacement products and parts may be new or remanufactured. THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT ANY IMPLIED WARRANTY IS REQUIRED BY LAW, IT IS LIMITED IN DURATION TO THE EXPRESS WARRANTY PERIOD ABOVE. NEITHER THE MANUFACTURER NOR ITS U.S. DISTRIBUTOR SHALL BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY NATURE, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR PROFITS, OR ANY OTHER DAMAGE WHETHER BASED IN CONTRACT, TORT, OR OTHERWISE. Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above exclusion or limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights that vary from state to state. THIS LIMITED WARRANTY DOES NOT COVER:

Service trips to deliver, pick up, install, or repair the product; instruct the customer on operation of the product;

repair or replace fuses or correct wiring or plumbing, or correction of unauthorized repairs/installation. Failure of product to perform during power failures and interruptions or inadequate electrical service. Damage caused by leaky or broken water pipes, frozen water pipes, restricted drain lines, inadequate or interrupted water supply or inadequate supply of air. Damage resulting from operating the product in a corrosive atmosphere or contrary to the instructions outlined in the product owners manual. Damage to the product caused by accidents, pests and vermin, lightning, wind, fire, floods, or acts of God. Damage resulting from misuse, abuse, improper installation, repair, or maintenance. Improper repair includes use of parts not approved or specified by Signature Kitchen Suite. Damage or failure caused by unauthorized modification or alteration, or if it is used for other than the intended purpose, or any water leakage where the unit was not properly installed. Damage or failure caused by incorrect electrical current, voltage, or plumbing codes, commercial or industrial use, or use of accessories, components, or consumable cleaning products that are not approved by Signature Kitchen Suite. WARRANTY 41 Damage caused by transportation and handling, including scratches, dents, chips, and/or other damage to the finish of your product, unless such damage results from defects in materials or workmanship and is reported within one (1) week of delivery (Call: 1-855-790-6655). Damage or missing items to any display, open box, discounted, or refurbished product. Products with original serial numbers that have been removed, altered, or can not be readily determined. Model and Serial numbers, along with original retail sales receipt, are required for warranty validation. Increases in utility costs and additional utility expenses. Replacement of light bulbs, filters, or any consumable parts. Repairs when your product is used in other than normal and usual household use (e.g. commercial use, offices, and recreational facilities) or contrary to the instructions outlined in the product owners manual. Costs associated with removal of your product from your home for repairs. The removal and reinstallation of the product if it is installed in an inaccessible location or is not installed in accordance with published installation instructions, including Signature Kitchen Suites owners and installation manuals. Shelves, door bins, drawers, handles, accessories, and other parts besides those that were originally included with this particular model. The cost of repair or replacement under these excluded circumstances shall be borne by the consumer. For complete warranty details and customer assistance, please call or visit our website:

Call 1-855-790-6655 (24 hours a day, 365 days a year) and select the appropriate option from the menu, or visit our website at www.thesignaturekitchen.com Or by mail:

Signature Kitchen Suite Customer Information Center:

P. O. Box 240007, 201 James Record Road Huntsville, Alabama 35813 ATTN: CIC Write your warranty information below:

Product Registration Information:

Model:

Serial Number:

Date of Purchase:

ENGLISH 42 MEMO MeMo MEMO 43 MEMO Customer Information CenterFor inquires or comments, call;1-855-790-6655 USA, Consumer User

FCC CLASS II PERMISSIVE CHANGE REQUEST LETTER SCS-F159 FCC Class II Permissive Change Request Letter Page 1 of 2 LG Electronics USA 111 Sylvan Avenue, Englewood Cliffs, NJ 07632, USA FCC Class II Permissive Change Request Letter Date: July 29,2022 To FCC:

RE: FCC Permissive II Change Request for Company: LG Electronics USA FCC ID: BEJE18MRE07 We are submitting an application for a class II permissive change to the FCC approval of the Company name: LG Electronics USA, product description: HOUSEHOLD REFRIGERATOR (FCC: BEJE18MRE07, Original Grant Date:

Aug. 18, 2017). The transmitter module itself has not changed. Here are the changes:

Alternated Wireless shelf module Sincerely, SungSoo Kim / Director LG Electronics USA, Inc. SCS-F159 FCC Class II Permissive Change Request Letter Page 2 of 2

Order Number

: GETEC-C1-22-558 Test Report Number

: GETEC-E3-22-103 Page 1 / 2 APPENDIX B

: INFORMATION OF CLASS II PERMISSIVE CHANGE EUT Type: Household Refrigerator FCC ID.: BEJE18MRE07 Order Number

: GETEC-C1-22-558 Test Report Number

: GETEC-E3-22-103 Page 2 / 2 Information of Class Permissive Change This information is to show compliance with FCC regulation Sec. 2.1043 and to be treated as Class permissive change. We declare that the basic frequencies of Clks, Xtals, processors/CPUs used/ or Generated within device have not changed. 1. Identification of apparatus EUT Type: Household Refrigerator Model Name: SKSCR3001P FCC ID.: BEJE18MRE07 Applicant: LG Electronics USA. 2. Contents of change(s): Alternated Item. Original Item

< Wireless shelf module > : P/No. : EAX57055402 Alternated New Item

< Wireless shelf module > : P/No. : :EAX57055404 Pictures of the Wireless shelf module (original & Alternated new)within internal photos. Refer to APPENDIX E = INTERNAL PHOTOGRAPHS ; 30 Page 35 Page EUT Type: Household Refrigerator FCC ID.: BEJE18MRE07

Confidentiality Request Letter Confidentiality Request Letter Page 1 of 3 LG Electronics USA 111 Sylvan Avenue, Englewood Cliffs, NJ 07632, USA July 29, 2022 To:

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: BEJE18MRE07 Pursuant to sections 0.457 and 0.459 of CFR 47, we respectfully request permanent confidential treatment of the following Exhibits accompanying this application as:

- Schematic Diagram The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Clients signature Clients name: SungSoo Kim / Director Contact information: 201-472-2623

/ address: 111 Sylvan Avenue, Englewood Cliffs, NJ 07632, USA Confidentiality Request Letter Page 2 of 3 LG Electronics USA 111 Sylvan Avenue, Englewood Cliffs, NJ 07632, USA July 29, 2022 To: Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: Short Term Confidentiality Request for FCC ID: BEJE18MRE07 To Whom It May Concern:

Pursuant to sections 0.457 and 0.459 of CFR 47, and to avoid premature release of sensitive information prior to marketing or release of the product to the public, the applicant requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 45 days; or for a specified date of not to exceed 180 days from the Grant Date. See KDB 726920. or 180

- Test Setup Photos Internal Photos

The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Sincerely, Clients signature Clients name: SungSoo Kim / Director Contact information: 201-472-2623

/ address: 111 Sylvan Avenue, Englewood Cliffs, NJ 07632, USA Confidentiality Request Letter Page 3 of 3

Order Number

: GETEC-C1-22-558 Test Report Number

: GETEC-E3-22-103 APPENDIX A

: ATTESTATION STATEMENT EUT Type: Household Refrigerator FCC ID.: BEJE18MRE07 July 01, 2022 Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 U.S.A. To whom it may concern:

We, the undersigned, hereby authorize Tae-Sig Park from GUMI University EMC Center to act on our behalf in all matters relating to applications for equipment authorization, including the signing of all documents relation to these matter. Any and all acts carried out by GUMI University EMC Center on our behalf shall have the same effect as acts of our own. We also hereby certify that no party to the application is subject of a denial of benefits, including FCC benefits, pursuant 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Sincerely, _________________________________________ SungSoo Kim, Director LG Electronics USA Tae-Sig Park, General manager GUMI University EMC Center