MFL68045804 ENGLISH Dimensions 29 mm Installation 1 2 3 90 mm 1. Connect the DC cable to the adapter. 2. Connect the DC adapter to gateway. And then, connect the wireless router to the gateway with LAN cable. 3. Place the gateway on the proper place and make connect power. Ensure the Power LED is on. Note : Initialization 70 mm LED Operation Power LED It turns on when power is applied. LAN LED It turns on when the LAN cable is normally connected and the gateway communicates through the LAN. Wireless Communication LED It blinks regularly when the gateway is connected through wireless communication. Troubleshooting The Power LED do not turn on. :
Check whether the DC cable is properly connected to both the gateway and the adapter. The LAN LED do not turn on. :
Check whether the LAN cable is properly connected. The Wireless communication LED blinks too fast. :
Contact the service center or dealer that you purchased this product. HomeKit reset Momentarily press the reset button. After then, Power LED flash 3 times. Factory reset Press and hold the reset button for over 10 seconds. After 10 seconds, all LEDs begin flashing 3 times. Smartphone Application Download the App LG SCENE Lighting from Apples App Store or Android Market. And just run it. Specifications Frequency Wireless range Operating voltage Current consumption Operating temperature Operating condition Weight Dimensions (WHD) 2405.0 ~ 2480.0 MHz line of sight 98 ft (30 m) 5 V DC (from the adapter) Max. 400 mA
-20 ~ +40 For Indoor use only 70 g 2.8x3.5x1.1 (70 mm x 90 mm x 29 mm) FRANAIS Dimensions 29 mm Installation 1 2 3 90 mm 1. Branchez le cble CC l'adaptateur. 2. Branchez l'adaptateur CC la passerelle. Ensuite, associez le routeur sans fil la passerelle avec le cble LAN. 3. Placez la passerelle un endroit adquat et branchez l'alimentation. Vrifiez que le voyant d'alimentation est allum 70 mm Fonctionnement des LED Voyant DEL d'alimentation Il s'allume lorsque le produit est mis sous tension. Voyant DEL rseau Il sactive lorsque le cble LAN est bien connect et que la passerelle communique au moyen de la connexion LAN. Voyant DEL de communication sans fil Il clignote rgulirement lorsque la passerelle est connecte via une communication sans fil. Dpannage Le voyant DEL d'alimentation ne s'allume pas. :
Vrifiez si le cble C. C. est correctement connect la passerelle et ladaptateur. Le voyant DEL rseau ne s'allume pas. :
Vrifiez que le cble rseau est correctement connect. Le voyant DEL de communication sans fil clignote trop rapidement. :
Contactez le centre de service ou le revendeur auprs duquel vous avez achet ce produit. Remarque : Initialisation Rinitialisation du HomeKit Appuyez momentanment sur le bouton de rinitialisation. Ensuite, la DEL dalimentation clignote 3 fois. Rinitialisation aux paramtres dusine Appuyez longtemps sur le bouton de rinitialisation pendant plus de 10 secondes. Une fois les 10 secondes passes, toutes les DEL se mettent clignoter 3 fois. Application sur tlphone intelligent Tlchargez lapplication LG SCENE Lighting sur lApp Store dApple ou sur Android Market. Et lancez-la. Caractristiques Frquence Porte sans fil Tension de fonctionnement Consommation lectrique Temprature de fonctionnement Conditions de fonctionnement Poids 2405,0~2480,0 MHz Porte optique : 30 m (98 ft) 5 V CC ( partir d'un adaptateur.) Max. 400 mA de -20 40 (-4 104) Pour utilisation en intrieur uniquement 70 g (2,5 oz) Dimensions (LxHxP) 70 mm x 90 mm x 29 mm (2,8 x 3,5 x 1,1) SCENE GATEWAY USER'S MANUAL MANUEL DE LUTILISATEUR MANUAL DEL USUARIO WARNING / AVERTISSEMENT / ADVERTENCIA EN
- Violation of warnings may lead to serious injury or death.
Use the rated power. Turn power off before installing the product.
Do not install the product near a fire. Do not expose the product to water. FR
- Le non-respect des avertissements peut entraner des blessures graves ou la mort. Utilisez la puissance nominale. Dsactivez l'alimentation avant d'installer le produit.
N'installez pas le produit prs d'une source de chaleur. N'exposez pas le produit l'eau. ES
- Hacer caso omiso de las advertencias puede provocar lesiones graves o incluso la muerte.
Utilice la potencia nominal.
Apague el suministro elctrico antes de instalar el producto.
No instale el producto cerca de un fuego. No someta el producto al agua. CAUTION / ATTENTION / PRECAUCIN EN
- Violation of precautions may lead to light injury or product damage.
Do not install on an uneven surface. Do not disassemble or deform.
Do not install nearby inflammable materials.
Do not expose to direct sunlight or moisture. FR
- Le non-respect des avertissements peut entraner des blessures graves ou la mort. Installez le produit sur une surface plane. Ne pas dmonter ou dformer le produit.
Ne pas installer le produit proximit de matriaux inflammables.
Ne pas exposer le produit directement la lumire du soleil ni la moisissure. ES
- Hacer caso omiso de las advertencias puede provocar lesiones graves o incluso la muerte.
No instale el producto en una superficie desigual.
No lo desmonte ni lo deforme.
No lo instale cerca de materiales inflamables. No lo exponga a la luz solar directa o a la humedad. SPANISH Dimensiones 29 mm Instalacin 1 2 3 90 mm 1. Conecte el cable de CC al adaptador. 2. Conecte el adaptador de CC a la puerta de enlace. Despus, conecte el router inalmbrico a la puerta de enlace con el cable LAN. 3. Site la puerta de enlace en un lugar adecuado y conecte la alimentacin. Asegrese de que el LED de alimentacin est encendido. 70 mm Funcionamiento del LED LED de alimentacin Se enciende cuando el dispositivo recibe alimentacin. LED de LAN Se enciende cuando el cable LAN est conectado con normalidad y la puerta de enlace se comunica a travs del LAN. LED de comunicacin inalmbrica Parpadea regularmente cuando la puerta de enlace est conectada de forma inalmbrica. Nota : Inicializacin Restablecer HomeKit Presione momentneamente el botn reset. Despus de ello, el LED de la alimentacin parpadear 3 veces. Restablecer los ajustes de fbrica Pulse y mantenga el botn reset durante ms de 10 segundos. Pasados 10 segundos, todos los LEDs empezarn a parpadear 3 veces. Aplicacin para Smartphone Descargue la App LG SCENE Lighting de la App Store de Apple o de Android Market. Simplemente, ejectela. Warranty & Customer Service
Warranty : 1 year
Manufacture Date : On the product
Customer Service : www.lg.com
Made in China Apple HomeKit Certified Apple HomeKit technology provides an easy, secure way to control your homes lights, doors, thermostats, and more from your iPhone, iPad, or iPod touch. Smart Phone App
HomeKit requires an iPhone, iPad or iPod touch with iOS 8.1 or later.
Compatible iPod/iPhone/iPad models iPhone 6, iPhone 6+, iPhone 5, iPhone 5c, iPhone 5s, iPhone 4s, iPad4, iPad 3, iPad Mini 1, iPad Mini2(Mini Retina), iPad AIR, iPod touch (5th generation) Android smart phone works with Android 4.3 or later.
Compatible Android models Android 4.3, Android 4.4, Android 5 Connectivity
LG Smart Lighting can be controlled by a SCENE Gateway.
Communication between SCENE Gateway and LG Smart Lighting is secured by end-to-end encryption and authentication.
SCENE Gateway enables LG Smart Lighting to work with HomeKit technology. Legal Notice Use of the HomeKit logo means that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad may affect wireless performance. Solucin de problemas El LED de alimentacin no se enciende. :
Compruebe si el cable DC est conectado correctamente tanto a la puerta de enlace como al adaptador. El LED de LAN no se enciende. :
Compruebe que el cable LAN est correctamente conectado. El LED de comunicacin inalmbrica parpadea demasiado rpido. :
Pngase en contacto con el centro de atencin al cliente o con la tienda donde adquiri el producto. Especificaciones Frecuencia Rango inalmbrico Tensin de alimentacin Consumo energtico Temperatura de funcionamiento Condiciones de uso Peso Dimensiones (Alt-An-Pr) 2405.0 ~ 2480.0 MHz Campo visual 30 m 5 V DC (Desde un adaptador.) Mx. 400mA de-20 a 40 Uso exclusivo en interior 70 g 70 mm x 90 mm x 29 mm Model name FCC ID IC 9GW97185D3 BEJ9GW97185D3-1 2703H-9GW97185D3 Federal Communications Commission (FCC) Statement You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures :
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation of the device of the device. FCC Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment and For indoor use only, use outdoors or in other modes not covered by this manual may violate the FCC regulation and violate the user authority to use the product. FCC RF Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. Equipment used at position in which the spaces between human body and antenna exceeded 20 cm Industry Canada (IC) Statement Industry Canada Statement :
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions :
1) this device may not cause interference and 2) this device must accept any interference, including interference that may cause undesired operation of the device. IC Radiation Exposure Statement :
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. NOTE : THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USERS AUTHORITY TO OPERATE THE EQUIPMENT. Avis de la Federal Communications Commission (FCC) Vous tes avis(e) que les changements ou les modifications apports cette unit, non expressment approuvs par la partie responsable de la conformit, pourraient annuler le droit accord lutilisateur dexploiter cet quipement. Cet quipement a t test et jug conforme aux limites sappliquant un appareil numrique de la classe B, conformment la partie 15 de la rglementation de la FCC. Ces limites ont t labores pour offrir une protection raisonnable contre les interfrences nuisibles dans une installation rsidentielle. Cet quipement gnre, utilise et peut mettre de lnergie de radiofrquence et, sil nest pas install et utilis conformment aux instructions du fabricant, peut provoquer des interfrences dangereuses pour les communications radio. Toutefois, rien ne garantit labsence dinterfrences dans une installation particulire. Si cet quipement provoque des interfrences nuisibles en ce qui concerne la rception radio ou tlvision, ce qui peut tre dtermin par la mise hors tension, puis sous tension de lquipement, vous tes invit(e) essayer de corriger les interfrences en prenant les mesures suivantes :
- Rorientez ou dplacez lantenne rceptrice.
- Augmentez la distance qui spare lquipement et le rcepteur.
- Branchez lquipement dans la prise dun circuit diffrent de celui auquel est branch le rcepteur. Consultez le revendeur ou un technicien radio / tlvision expriment pour obtenir de laide. Avertissement FCC Tout changement ou toute modification apport(e) cette unit non expressment approuv(e) par la partie responsable de la conformit pourrait annuler le droit accord lutilisateur dexploiter cet quipement. Cet appareil ne convient qu une utilisation intrieure. Une utilisation extrieure ou d'autres faons non couvertes par ce manuel peut constituer un non-respect de la rglementation FCC et porter atteinte aux droits de lutilisateur utiliser ce produit. nonc FCC sur lexposition aux rayonnements de radiofrquence :
Cet appareil est conforme aux limites d'exposition aux rayonnements pour un environnement non contrl. Les utilisateurs suivront les instructions dexploitation spcifiques pour rpondre aux exigences de conformit sur lexposition aux radiofrquences. Notice d'Industrie Canada (IC) Avis d'Industrie Canada :
Cet appareil est conforme la norme CNR-210 des rglements d'Industrie Canada. Son fonctionnement est sujet aux deux conditions suivantes :
1) Cet appareil ne doit pas provoquer d'interfrences et 2) Cet appareil doit accepter toutes les interfrences, y compris celles pouvant entraner son dysfonctionnement. Avis d'Industrie Canada sur l'exposition aux rayonnements Cet appareil est conforme aux limites d'exposition aux rayonnements d'Industrie Canada pour un environnement non contrl. REMARQUE : LE FABRICANT N'EST PAS RESPONSABLE DES INTERFRENCES RADIOLECTRIQUES CAUSES PAR DES MODIFICATIONS NON AUTORISES APPORTES CET APPAREIL. DE TELLES MODIFICATIONS POURRAIT ANNULER L'AUTORISATION ACCORDE L'UTILISATEUR DE FAIRE FONCTIONNER L'APPAREIL.