User Manual PRODUCT NAME : Dual Band 2T2R MIMO Wi-Fi Module MODEL NAME : TWFM-B006D The information contained herein is the exclusive property of LG Innotek and shall not be distributed, reproduced or disclosed in whole or no in part without prior written permission of LG Innotek.
(00)-0073 REG. DATE : 2012.07.25 User Manual REV. DATE : 2012.07.25 MODEL NAME : TWFM-B006D REV.NO : 1.0 PAGE :
1 / 8 Table of Contents No. Description Page 1 2 3 4 4 5 6 7 8 Features Module Photo Block Diagram Storage Conditions Operating Conditions Software Programming Pin Description Outline Drawing Packing Information 2 2 3 4 4 5 6 7 8 2012 LGIT. All rights reserved. REG. DATE : 2012.07.25 User Manual REV. DATE : 2012.07.25 MODEL NAME : TWFM-B006D REV.NO : 1.0 PAGE :
2 / 8 1. Features TWFM-B006D is the small size and low power module for IEEE 802.11a/b/g/n wireless LAN. TWFM-B006D is based on Broadcom BCM43236B solution.
IEEE 802.11 a/b/g/n Dual Band WLAN infrastructure
Size : 48mm x 30mm x 6.7mm
2.4GHz and 5GHz internal PA
Two stream spatial multiplexing up to 300Mbps
External ANT : EPA(Embedded and Press Antenna)
Use on-chip OTP (One-Time Programmable)
USB 2.0
Supports drivers for Windows Vista, 2000, XP, Linux
Security : WPA,WPA2,AES(TKIP) ,IEEE 802.1X Application: DTV, DVR, HD DVD Player, Blue-ray Disk Player, STB 2. Module Photo 2012 LGIT. All rights reserved. REG. DATE : 2012.07.25 User Manual REV. DATE : 2012.07.25 MODEL NAME : TWFM-B006D REV.NO : 1.0 PAGE :
3 / 8 3. Block Diagram 2012 LGIT. All rights reserved. REG. DATE : 2012.07.25 User Manual REV. DATE : 2012.07.25 MODEL NAME : TWFM-B006D REV.NO : 1.0 PAGE :
4 / 8 4. Storage Conditions Parameter Storage Temperature Storage Humidity (@ 40) Min
-10
-
Max
+80 90 Unit
%
Caution : The specifications above the Table define levels at which permanent damage to the device can occur. Function operation is not guaranteed under these conditions. Operating at absolute maximum conditions for extend periods can adversely affect the long-term reliability of the device. Other conditions 1) Do not use or store modules in the corrosive atmosphere, especially where chloride gas, sulfide gas, acid, alkali, salt or the like are contained. Also, avoid exposure to moisture. 2) Store the modules where the temperature and relative humidity do not exceed 5 to 40 and 20 to 60%. 3) Assemble the modules within 6 months. Check the soldering ability in case of 6 months over. 5. Operating Conditions Parameter Min Typ Max Unit Operating Temperature Operating Humidity (40) 0
-
-
-
+60 85
%
Supply Voltage 3.32 3.5 3.67 Vdc 2012 LGIT. All rights reserved. REG. DATE : 2012.07.25 User Manual REV. DATE : 2012.07.25 MODEL NAME : TWFM-B006D REV.NO : 1.0 PAGE :
5 / 8 6. Software Programming The module is controlled by wl command. It is intended for those evaluating and/or testing Broadcoms IC, describes a subset of the commands available in wl, the Broadcom WLAN client utility. 6-1. Command syntax The syntax is as follows:
wl <adapter> [-h] [-d|u|x] <command> [arguments]
where
-h this message and command descriptions
-d output format signed integer
-u output format unsigned integer
-x output format hex decimal The [h,u] option is only to print help. Other syntax specifics are as follows:
Entries within square brackets, such as [arguments], are optional. In the above example, switches within brackets, such as h, are typed as shown. The |symbol should not be typed, it represents the word or. Entries within angle brackets, such as <adapter>, are required and indicate that a value must be inserted in place of the item contained within the angle brackets. Entries shown outside of either square or angle brackets are to be typed as shown. 6-2. Command List and Version CMDS Syntax:
wl cmds Purpose: Generates a list of available commands. Parameters:None Returns:
All commands available to the attached 43XX chip. VER Syntax:
wl ver Purpose: Generates a list of available commands. Parameters:None Returns:
All commands available to the attached 43XX chip. Please refer to 80211-TI201-R technical document of Broadcom to other commands. 2012 LGIT. All rights reserved. REG. DATE : 2012.07.25 User Manual REV. DATE : 2012.07.25 MODEL NAME : TWFM-B006D REV.NO : 1.0 PAGE :
6 / 8 7. Pin Description Pin No. Pin Name I/O Pin Description 1 2 3 4 5 6 VCC D-
D+
GND WOW NC I I/O I/O
-
I I VDD 3.5V USB Communication signal USB_DN USB Communication signal USB_DP GND Wake On WLAN NC
< TOP View >
A Note. 1) Recommend a Module install sequence for prevent USB device failure
- Supply 3.5V power
- Connect to data signal (USB_DP, USB_DN) 2) If remove the module, proceed in reveres sequence 3) Connector : (CONN 12507WR-06L, YEONHO ELECTRONICS CO., LTD.) A 2012 LGIT. All rights reserved. REG. DATE : 2012.07.25 User Manual REV. DATE : 2012.07.25 MODEL NAME : TWFM-B006D REV.NO : 1.0 PAGE :
7 / 8 8. Outline Drawing 2012 LGIT. All rights reserved. REG. DATE : 2012.07.25 User Manual REV. DATE : 2012.07.25 MODEL NAME : TWFM-B006D REV.NO : 1.0 PAGE :
8 / 8 9. Packing Information 1Tray Package Qty : 120EA Tray Material : antistatic PET 1Tray Weight : 0.2kg
(1 Module Weight : 6.8 0.7g) Tray Tray Stacking Qty :6EA Corrugated Fibreboard Total Packing Qty : 1,440EA Total Packing Weight : 13.2 1.5kg 1Box Package Qty : 720EA Box Size : A x B x C (512 x 377 x 121.5) Box Material : Corrugated Fibreboards 1Box Packing Weight : 6.6 0.7kg Inner Box 2012 LGIT. All rights reserved. PP Band RoHS Marking Barcode Label RoHS Marking :
Label, Stamp, Printing Marking Color :
Gray or Red for Stamp, Label, Printing on the board and etc. Black only for Printing on Label. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum 20 cm between the radiator and your body. Remark This radio can not be installed in host where co-located or operating in conjunction with any other antenna or transmitter. This radio must be restricted to install in host that is intended for indoor use only for 5150-5250 MHZ band. Wi-Fi label is written at the end of the TV. For label requirement when transmitter module is installed in a host, the host shall have an additional permanent label referring to the enclosed module. Contains Transmitter Module FCC ID: BEJTWFMB006D