WIRELESS SENSOR Specifications Model Motion Sensor Frequency Wireless range Operating conditions Temperature Humidity Weight Dimensions (WHD) Light sensing range Target Light level installation height Operating voltage Current consumption FCC ID ACM74838701 Passive Infrared(PIR) Sensor 2405.0~2480.0 MHz Line of sight 98 ft (30 m) For Indoor use only Operating : -4 to 122 (-20 to 50) Storage : -22 to 185 (-30 to 80) 0 to 85 % Rh 1.1 oz (30 g) Wireless Module : 0.9 x 1.4 x 0.3
(22 mm x 36 mm x 8 mm) Sensor module : 19.7 x 07.9
(50 mm x 20 mm) 1 ~ 1000 lx Default : 600 lx Software configurable : 1~1000 lx Up to 11.5 ft (3.5 m) 3.3 V DC (from LG LED lighting) Max.80 mA BEJACM74838701 Disposal of your old appliance 1. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC. 2. All electrical and electronic products shall be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. 3. The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health. 4. For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product. Check out below address for more information. http://www.lg.com/global/sustainability/environment/
Features
- Simple installation just by pluging a sensor
- Easy adjustment using a rotary dial and a switch
- Wireless communication at 2.4GHz
- Possible to be used for Wireless Lighting control system. Applications High ceiling spaces such as warehouse, storage areas, etc. Safety Precautions WARNING Violation of warnings may lead to serious injury or death. CAUTION Violation of precautions may lead to light injury or product damage. Do not wipe the surface with inflammables such as alcohol, benzene and acetone. Do not expose to direct sunlight or moisture. Do not install nearby air conditioners and heating appliance. Turn power off before installing the product. Do not disassemble or deform. Do not give shock on. Do not install in areas that have risks of flooding Do not store in a humid area. Do not install nearby inflammable materials. Please read this manual carefully before using the product. OWNERS MANUAL
- 1 -
- 2 -
FCC ID : BEJACM74838701 IC : 2703H-ACM74838701 Equipment used at position in which the spaces between human body and antenna exceeded 20 cm FCC WARNING This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an nauthorized change or modification is made Federal Communications Commission (FCC) Statement You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the users authority to operate the equipment.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures :
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. FCC Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment and For indoor use only, use outdoors or in other modes not covered by this manual may violate the FCC regulation and violate the user authority to use the product. FCC RF Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. Industry Canada (IC) Statement Industry Canada Statement:
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions:
1) this device may not cause interference and 2) this device must accept any interference, including interference that may cause undesired operation of the device. IC Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USERS AUTHORITY TO OPERATE THE EQUIPMENT. Avis de la Federal Communications Commission (FCC) Vous tes avis(e) que les changements ou les modifications apports cette unit, non expressment approuvs par la partie responsable de la conformit, pourraient annuler le droit accord lutilisateur dexploiter cet quipement. Cet quipement a t test et jug conforme aux limites sappliquant un appareil numrique de la classe B, conformment la partie 15 de la rglementation de la FCC. Ces limites ont t labores pour offrir une protection raisonnable contre les interfrences nuisibles dans une installation rsidentielle. Cet quipement gnre, utilise et peut mettre de lnergie de radiofrquence et, sil nest pas install et utilis conformment aux instructions du fabricant, peut provoquer des interfrences dangereuses pour les communications radio. Toutefois, rien ne garantit labsence dinterfrences dans une installation particulire. Si cet quipement provoque des interfrences nuisibles en ce qui concerne la rception radio ou tlvision, ce qui peut tre dtermin par la mise hors tension, puis sous tension de lquipement, vous tes invit(e) essayer de corriger les interfrences en prenant les mesures suivantes :
- Rorientez ou dplacez lantenne rceptrice.
- Augmentez la distance qui spare lquipement et le rcepteur.
- Branchez lquipement dans la prise dun circuit diffrent de celui auquel est branch le rcepteur.
- Consultez le revendeur ou un technicien radio/tlvision expriment pour obtenir de laide. Avertissement FCC Tout changement ou toute modification apport(e) cette unit non expressment approuv(e) par la partie responsable de la conformit pourrait annuler le droit accord lutilisateur dexploiter cet quipement. Cet appareil ne convient qu une utilisation intrieure. Une utilisation extrieure ou d'autres faons non couvertes par ce manuel peut constituer un non-respect de la rglementation FCC et porter atteinte aux droits de lutilisateur utiliser ce produit. nonc FCC sur lexposition aux rayonnements de radiofrquence :
Cet appareil est conforme aux limites d'exposition aux rayonnements pour un environnement non contrl. Les utilisateurs suivront les instructions dexploitation spcifiques pour rpondre aux exigences de conformit sur lexposition aux radiofrquences. Notice d'Industrie Canada (IC) Avis d'Industrie Canada :
Cet appareil est conforme la norme CNR-210 des rglements d'Industrie Canada. Son fonctionnement est sujet aux deux conditions suivantes :
1) Cet appareil ne doit pas provoquer d'interfrences et 2) Cet appareil doit accepter toutes les interfrences, y compris celles pouvant entraner son dysfonctionnement. Avis d'Industrie Canada sur l'exposition aux rayonnements Cet appareil est conforme aux limites d'exposition aux rayonnements d'Industrie Canada pour un environnement non contrl. REMARQUE : LE FABRICANT N'EST PAS RESPONSABLE DES INTERFRENCES RADIOLECTRIQUES CAUSES PAR DES MODIFICATIONS NON AUTORISES APPORTES CET APPAREIL. DE TELLES MODIFICATIONS POURRAIT ANNULER L'AUTORISATION ACCORDE L'UTILISATEUR DE FAIRE FONCTIONNER L'APPAREIL.
- 3 -
- 4 -
- 5 -
- 6 -