Trademarks:
Other product and company names are trademarks or registered trademarks of their respective holders. Table of Contents Table of Contents Wireless USB Network Adapter1 Introduction . 1 Features and Benefits . 2 Hardware Description . 2 Product Specifications . 3 Compliance . 7 Federal Communication Commission Interference Statement . 7 CE . 8 i Wireless USB Network Adapter Introduction The Wireless USB Network Adapter (WN7111B) is another cutting edge introduction in 2.4GHz wireless communication for SOHO environment. Designed for both your home entertainment with blu-ray DVD player and your small office, this wireless network adapter provides the speed, coverage and security expected by todays wireless users. WN7111B is IEEE 802.11n compliant while maintaining full backwards compatibility with the IEEE 802.11b and 802.11g standards. It utilizes advanced SISO - Single Input Single Output technology to deliver incredible speed and range. The Wireless USB Network Adapter provides better performance than existing 802.11g technology. Upgrading to wireless 11n network provides an excellent solution for sharing an Internet connection and files such as video, music, photos, and documents. Introduction 1 Wireless USB Network Adapter Features and Benefits IEEE802.11n,g,b compliant Wireless speeds up to 150 Mbps Increased speed and coverage - up to 2.7 times the speed of IEEE Fully backwards compatible with 802.11b/g wireless networks Replaces wired LANs at dramatically lower cost than wired 802.11g alternatives Orthogonal Frequency Division Multiplexing (OFDM) and advanced SISO (Single Input Single Output) technology provides high speed connection Hardware Description The WN7111B adapter provides 150 Mbps connections. It is fully compliant with the specification of the IEEE 802.11b/g/n standards. Refer to the users manual of your media device for configuration details. Hardware Description 2 Product Specifications Wireless Network IEEE802.11b: up to 11 Mbps IEEE 802.11g: up to 54 Mbps IEEE802.11n: up to 150 Mbps Operating Range Outdoor: Up to 300 m (984 ft) Indoor: Up to 100 m (328 ft) Wireless Mode Supported AP, access point, (Infrastructure) Client mode Security AP (Infrastructure) mode supports Static WEP that support both 64 and 128 bit keys. WPA,WPA-PSK, WPA2,WPA2-PSK Ad-hoc mode supports None (plaintext) Static WEP that supports both 64 and 128 bit keys. Radio Signal Signal Type Direct Sequence Spread-Spectrum (DSSS) DBPSK: 1 Mbps DQPSK: 2 Mbps CCK: 5.5/11 Mbps BPSK: 6/9 Mbps QPSK: 12/18 Mbps 16-QAM: 24 Mbps 64-QAM: 48/54 Mbps and above, RX up to 150Mbps Product Specifications 3 Product Specifications Operating Frequency USA (FCC) and Canada (IC): 2.412 ~ 2.462 GHz Europe (ETSI): 2.412 ~ 2.472 GHz Spain: 2.457 ~ 2.462 GHz France: 2.457 ~ 2.472 GHz Japan (STD-T66/STD-33): 2.412 ~ 2.484 GHz Operating Channels USA (FCC) and Canada (IC): 11 channels Europe (ETSI): 13 channels Spain: 2 channels Japan (STD-T66/STD-33): 14 channels Sensitivity 85 dBm @ 11 Mbps 69 dBm @ 54 Mbps 66 dBm @ 64-QAM, 20MHz channel spacing 63 dBm @ 64-QAM, 40MHz channel spacing RF Output Power 802.11b: 17 ( 2) dBm (2.4GHz, 11Mbps, CCK) 802.11g: 14 ( 2) dBm (2.4GHz, 54Mbps, OFDM) 802.11n: 14 ( 2) dBm (2.4GHz, HT20), 13 ( 2) dBm (2.4GHz, HT40) Physical Characteristics USB Pin Assignment Pin 1: Vcc (Positive Input Supply Voltage: +5V) Pin 2: USB D-
Pin 3: UNS D+
Pin 4: GND (Ground) Pin 5: WOWL Product Specifications 4 Product Specifications Dimensions 45 (L) x 20 (W) mm Weight 4.2 g (0.0093 lb) Antenna Two PIFA antennas on PCB board Power Voltage DC5V +/- 10%
Power Consumption Full load: 430 mA Standards Conformance Wireless Standard IEEE 802.11b, IEEE 802.11g, IEEE 802.11n Environmental Temperature Operating: 0 to 50 C (32 to 122 F) ambient Storage: -10 to 70 C (14 to 158 F) ambient Humidity: 5% - 90% (non-condensing) Certification/Regulation WHQL ETSI/CE ESD: EN61000-4-2, which specifies 4kV contact and 8kV air discharge. CE FCC Wi-Fi Certificate Product Specifications 5 Product Specifications Software Drivers Windows 2000 Windows XP Windows Vista Linux Product Specifications 6 Compliance Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is Consult the dealer or an experienced radio/TV technician for help. connected. Le pre sent appareil es t conforme aux CNR d'Indus trie Canada applicables aux appareils radio exempts de licence. L'exploita tion eas tu toris e e aux deux c onditions s uivante s :
(1) l'a ppa re il ne doit pa s produire de brouillage , e t
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioelectrique subi, meme s i le brouillage es t susceptible d'en compromettre le fonctionnement. This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. Compliance 7