PIDB20501 BT Mono Headset Users Manual

 

BMH-10x Bluetooth Headset Congratulations............................................................3 Package Contents.......................................................3 Headset Features........................................................4 Charging the internal battery ...................................5 Switching the headset on or off...............................6 Pairing Procedure........................................................6 Phone call use..............................................................6 Making a call from the mobile phone ....................................7 Voice dialing through the headset..........................................7 Last number redial ......................................................................7 Answering a call...........................................................................7 Call swap........................................................................................7 Ending a call .................................................................................8 Rejecting a call.............................................................................8 Muting a call..................................................................................8 Transferring a single call...........................................................8 Adjusting the volume..................................................................8 LED indications ............................................................9 Bluetooth headset specification...........................9 Cautions .......................................................................10

- 1 -

Certification and safety approvals/general information Service and Repair ...................................................12 Safety and General Information............................13 11

- 2 -

Congratulations Congratulations on your purchase of the BMH-10x Bluetooth headset. This headset allows you to communicate wirelessly through your mobile phone and includes a built-in microphone and earphone. It uses Bluetooth 1.2 technology, but is also compatible with mobile phones using Bluetooth version 1.1 technology. Your BMH-10x Bluetooth headset uses a built-in Lithium Polymer rechargeable battery, which gives long life to weight ratio. Note that any phones that you use with this headset must support the same profiles as your headset. Package Contents 1. Bluetooth headset (including ear hook) 2. AC adaptor 3. This user guide 4. Neck cord

- 3 -

Headset Features The headset can be worn on either ear. Just clip the ear hook onto the preferred side.

- 4 -

Charging the internal battery Before using your headset, please charge the internal battery. To charge the battery:

1. Connect the AC adaptor to an electrical outlet. 2. Plug the adaptors connector into the charging port (see below). 3. While charging, the blue LED light will stay on. When charging is complete, the LED will switch off. You can then unplug the adaptor's connector from the headset and disconnect the adaptor from the electrical outlet. 4. Charging time is about 2 hours.

- 5 -

Switching the headset on or off To switch on:

Press and hold the talk key for 3 seconds until the blue LED turns on. To switch off:

Press and hold the talk key for 3 seconds until the orange LED flashes. Pairing Procedure Your BMH-10x Bluetooth headset needs to be paired to your mobile phone before it can be used. This is a two part process;

one part is carried out on the headset and the other is carried out on the mobile phone. Note that different mobile phones use a different method to go through the pairing process. To pair your BMH-10x Bluetooth headset:

1. With your headset turned off, press and hold the talk key for 6 seconds. The LED will alternate rapidly between blue and orange, which indicates that the headset is in pairing mode. 2. Use your phones menu to search for Bluetooth audio devices. The phone should indicate it has found the

"BMH-10x" headset. Confirm that you want to pair your mobile phone and headset together. If you are unsure how to go through the pairing process on your mobile phone, please consult its user manual. 3. When asked for a pin key, enter: 0000. Your phone will confirm that pairing has been successful. Note that there is usually a time limit to pair devices, for example 2 minutes. Phone call use

- 6 -

Making a call from the mobile phone While your mobile phone is paired with your headset, you can use the mobile phone to make phone calls in the same way as normal. The only difference will be that the earphone and microphone functions of the headset will be used instead of the phones. Voice dialing through the headset In order to use the voice dial feature of your headset, your phone must support voice dialing and must have voice tags stored. To use voice dialing:

1. Switch the headset on and pair it with your phone, if this is not already the case. 2. Press the decrease volume key up to 3 seconds 3. You will hear a short tone. Say the voice tag immediately. 4. Your phone will make the call. Last number redial When the headset is in standby mode (not in conversation), press the talk key three times within 1 second, and your phone will redial the last number that you called. Note: This function only works on Bluetooth phones that support the Hands-free profile Answering a call When someone calls you, a ring tone will sound in your headset. To answer the call, press the talk key. Note that you can set your mobile phone to automatically answer calls, meaning that you do not even need to press the talk key. Please refer to your mobile phones user guide for more information about this setting. Call swap Some mobile phones support call swap. This means that if you

- 7 -

receive a second call, you can put the first caller on hold while you speak to the second caller. If your phone supports this feature:

1. Press the increase volume key for 3 seconds to put the first caller on hold and answer the second call 2. When the second call has ended, the first caller will automatically be taken off hold. Ending a call During a call, press the talk key for 3 seconds to hang up. If the other person hangs up first, then the call will end automatically. Rejecting a call If you do not wish to accept a call, press and hold the talk key for 3 seconds. Note: To use this function, your mobile phone must support the Hands-free profile. Muting a call During a conversation, press and hold the decrease volume key for 3 seconds. The headset, including the microphone, will mute. To cancel mute, press either the increase or decrease volume key once. You will hear two short tones per 3 seconds to remind you of the mute status, until canceling mute function. Transferring a single call When activating a call, you can double-click the talk key within 1 second to switch conversation between the BMH-100 headset and the mobile phone. Adjusting the volume The headset offers 6 pre-set volume levels. To increase the volume, press the increase volume key To decrease the volume, press the decrease volume key.

- 8 -

LED indications When you turn the headset on, the LED will indicate the battery status. If the blue LED stays on solidly for 5 seconds, then the battery If the orange LED stays on solidly for 5 seconds, the battery is sufficiently charged needs to be recharged. During normal use, if you see the orange LED flashing every 30 seconds, please recharge the battery as soon as possible. Bluetooth headset specification Compatible with Bluetooth Ver.1.1 or 1.2 devices Maximum distance Weight of headset Typical standby time up to120 hours up to 8 hours Typical talk time Typical re-charge time 2 hours Battery type Approximately 18 grams 30 Feet (10 meters) Lithium Polymer 130 mAh rechargeable NOTE: Talk time and standby time vary depending on the mobile phone used.

- 9 -

Cautions 1. Always store the headset safely. 2. Avoid storage at temperatures below -25C or above 70C.

(Storage at high or low temperatures can degrade performance and reduce battery life.) 3. Avoid operating at temperatures below -10C or above 50C. 4. Do not expose the headset or any of its supplied parts to rain or other liquids. 5. Avoid humidity below 10% RH or above 95% RH.

- 10 -

Certification and safety approvals/general information This product is CE, FCC, BQB marked. Please note that this product uses radio frequency bands not available for use within some areas of the EU. This product is intended to be used in Austria, Belgium, Denmark, Finland, France, Germany, Greece, Ireland, Italy, Luxembourg, The Netherlands, Portugal, Spain, Sweden, United Kingdom and within EFTA in Iceland, Norway and Switzerland. Users are not permitted to make changes or modify the device in any way. Changes or modifications not expressly approved by your distributor will void the users' authority to operate the equipment. Bluetooth is a registered trademark owned by Bluetooth SIG, Inc. Important information on safe and efficient operation. Read this information before using your phone. Users are not permitted to make changes or modify the device in any way. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

- 11 -

Service and Repair Battery: This headset is equipped with a Li-poly rechargeable battery. Replacement or service must be carried out at a qualified service center or returned to the manufacturer. Charger: Use only the supplied and approved AC charger.

- 12 -

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that maycause undesired operation. Any changes or modifications (including the antennas) made to this device that are not expressly approved by the manufacturer may void the users authority to operate the equipment. FCC RF Radiation Exposure Statement: This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.