Model number Revision Page 1187665 1.1 1 of 9 Hisense WIFI module\WCBN4521R18\ROH NEW UPDATE PRODUCT SPECIFICATION Brand Name Product name LITE-ON WIFI module Model name WIFI module\WCBN4521R18\ROH Model number:
1187665 DRAW. EDAM. APPD. Date 2017-11-20 Hisense WIFI module\WCBN4521R18\ROH Model number Revision Page 1187665 1.1 2 of 9 CONTENTS Content Change History Dimension The key structure and Components Functions and Test Packing Drawing Environmental Environmental requirements Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Page 3 4 5 6~9 9 9 9 Hisense WIFI module\WCBN4521R18\ROH Model number Revision Page 1187665 1.1 3 of 9 Change History Revision Change List Author Date 1.0 1.1 Preliminary Ken Chang 2017.10.17 Update model number and photo Ken Chang 2017.11.20 Hisense WIFI module\WCBN4521R18\ROH 1. Dimension Model number Revision Page 1187665 1.1 4 of 9 Hisense WIFI module\WCBN4521R18\ROH 2. The key structure and Components 2.1 Connector spec Model number Revision Page 1187665 1.1 5 of 9 Model number Revision Page 1187665 1.1 6 of 9 Hisense WIFI module\WCBN4521R18\ROH 3. Functions and Test 3.1 Functions PRODUCT FEATURES Operateat2.4GHz/5GHzband 866MbpsPHYRateSupport 2T2RModes 20/40/80MHzBandwidthSupport USB2.0supportfordateratesupto12Mbpsfullspeedand480Mbpshighspeed IEEEstandardssupport:IEEE802.11a/b/g/nand802.11acdraft 802.11iWEP64/128,AES,TKIP,GCMP,WAPI RoHScompliance LowHalogencompliance FUNCTIONAL SPECIFICATIONS MainChipset WIFIStandard BusInterface FormFactor DataRate MT7618BUN IEEE802.11a/b/g/n/acdraft USB2.0 40x33x6mm 802.11b:
CCK,DQPSK,DBPSK 802.11a/g:
64QAM,16QAM,QPSK,BPSK 802.11n:
64QAM,16QAM,QPSK,BPSK 802.11ac:
FrequencyRange TransmitOutputPower 256QAM,64QAM,16QAM,QPSK,BPSK 2.400~2.4835GHz 5.180~5.845GHz 11b:17+/1.5dBm(11Mbps) 11g:15+/1.5dBm(54Mbps) 11n:15+/1.5dBm(MCS7HT20) 11a:14+/1.5dBm(54Mbps) 11an:13.5+/1.5dBm(MCS7HT20/40) Hisense WIFI module\WCBN4521R18\ROH Model number Revision Page 1187665 1.1 7 of 9 ReceiveSensitivity Temperature&Humidity 11ac:11.5+/1.5dBm(HT80) 11b@11Mbps:<82dBm 11g@54Mbps:<70dBm 11n@MCS7::<64dBm 11ac@MCS9:<56dBm NormalTestCondition:25+/2deg.C,65+/2%RH Operating:10to70deg.C Storage:40to85deg.C OperatingVoltage 5V10%I/Osupplyvoltage AntennaType OnBoardMetallicAntennax2 PowerConsumption Standbymode:40mA TX:2.4G HT20340mA HT40340mA 5G HT20500mA HT40500mA HT80500mA 3.2 Antenna spec inputresistance Operatingchannel VSWR Gain 3.3Pindefine 50 2.4GHz~2.5GHz5.15~5.85GHz 2.4GHz~2.5GHzVSWR25.15~5.85GHzVSWR3 For2.4GHzAntennamaxgain<5dBifor5GHzAntennamaxgain<8dBi PIN ASSIGMENT Name Pin 1 2 3 4 5 6 7 8 9 10 WiFi_Reg_On BT_HOST_WAKE
+5V USB_D USB_D+
GND GND 3D_SYNC RST_N WLAN_DEV_WAKE Hisense WIFI module\WCBN4521R18\ROH Model number Revision Page 1187665 1.1 8 of 9 USB CONNECTOR SPEC Plating: MATTE TIN over nickel Plated RECOMMENDED OPERATION CONDITIONS Symbol VDD33 VDD12 Rating 3.3V Supply Voltage 1.2V Supply Voltage Min 3.0 1.10 Typ 3.3 1.2 Max 3.6 1.23 Units V V DC CHARACTERISTICS Symbol Parameter VIL VIH VOL VOH Input Low Voltage Input High Voltage Output Low Voltage Output High Voltage Min
-
2.0 0 2.97 Typ 0 3.3
-
-
Max 0.9 3.6 0.33 3.3 Units V V V Hisense WIFI module\WCBN4521R18\ROH 4. Packing drawing Model number Revision Page 1187665 1.1 9 of 9 5. ENVIRONMENTAL OPERATING Operating Temperature:
Relative Humidity:
STORAGE Temperature:
Relative Humidity:
-10 to 70 C (32 to 158 F) 5-90% (non-condensing)
-40 to 80 C (-40 to 176 F) 5-95% (non-condensing) 6 . Environmental requirements Components used in raw materials, packaging materials, etc., must comply with Hisense Q / RSAG J15.002 chemical substances limit requirements. Hisense WIFI module\WCBN4521R18\ROH FCC Statement Model number Revision Page 1187665 1.1 10 of 9 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Thisdeviceanditsantenna(s)mustnotbecolocatedwithanyothertransmittersexceptinaccordance withFCCmultitransmitterproductprocedures. Referring to the multitransmitter policy, multipletransmitter(s)and module(s)can be operated simultaneously without C2PC. This device is restricted for indoor use. IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. IMPORTANT NOTE:
This module is intended for OEM integrator. The OEM integrator is responsible for the compliance to all the rules that apply to the product into which this certified RF module is integrated. Additional testing and certification may be necessary when multiple modules are used. 20cm minimum distance has to be able to be maintained between the antenna and the users for the host this module is integrated into. Under such configuration, the FCC radiation exposure limits set forth for an population/uncontrolled environment can be satisfied. USERS MANUAL OF THE END PRODUCT:
In the users manual of the end product, the end user has to be informed to keep at least 20cm separation with the antenna while this end product is installed and operated. The end user has to be informed that the FCC 1.1 Page 1187665 Revision 11 of 9 Model number Hisense WIFI module\WCBN4521R18\ROH radio-frequency exposure guidelines for an uncontrolled environment can be satisfied. The end user has to also be informed that any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. If the labelling area is small than the palm of the hand, then additional FCC part 15.19 statement is required to be available in the users manual: This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. LABEL OF THE END PRODUCT:
The final end product must be labeled in a visible area with the following " Contains TX FCC ID:
PPQ-WCBN4521R18 ". If the labelling area is larger than the palm of the hand, then the following FCC part 15.19 statement has to also be available on the label: This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. Ant. Brand Model Name Antenna Type 1 HUN PAI ENTERPRISE Co W4521R-A0001 2 HUN PAI ENTERPRISE Co W4521R-A0002 PIFA Antenna PIFA Antenna Gain (dBi) 2.4GHz 3.27 4.30 5GHz 4.72 4.20 Hisense WIFI module\WCBN4521R18\ROH IC Statement Model number Revision Page 1187665 1.1 12 of 9 This device complies with Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. This device and its antenna(s) must not be co-located with any other transmitters except in accordance with IC multi-transmitter product procedures. Referring to the multi-transmitter policy, multiple-transmitter(s) and module(s) can be operated simultaneously without reassessment permissive change. Cet appareil et son antenne (s) ne doit pas tre co-localiss ou fonctionnement en association avec une autre antenne ou transmetteur. This radio transmitter (4491A-WCBN4521R18) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Le prsent metteur radio (4491A-WCBN4521R18) a t approuv par Industrie Canada pour fonctionner avec les types d'antenne numrs ci-dessous et ayant un gain admissible maximal d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est suprieur au gain maximal indiqu, sont strictement interdits pour l'exploitation de l'metteur. Dynamic Frequency Selection (DFS) for devices operating in the bands 5250- 5350 MHz, 5470-5600 MHz and 5650-5725 MHz. Slection dynamique de frquences (DFS) pour les dispositifs fonctionnant dans les bandes 5250-5350 MHz, 5470-5600 MHz et 5650-5725 MHz. The device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. les dispositifs fonctionnant dans la bande 5150-5250 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux. The maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit. le gain maximal dantenne permis pour les dispositifs utilisant les bandes 5250-5350 MHz et 5470-5725 MHz doit se conformer la limite de p.i.r.e. 1.1 Page 1187665 Revision 13 of 9 Model number Hisense WIFI module\WCBN4521R18\ROH The maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate. le gain maximal dantenne permis (pour les dispositifs utilisant la bande 5725-5850 MHz) doit se conformer la limite de p.i.r.e. spcifie pour lexploitation point point et non point point, selon le cas. For indoor use only. Pour une utilisation en intrieur uniquement. IMPORTANT NOTE:
IC Radiation Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Cet quipement est conforme aux limites d'exposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. IMPORTANT NOTE:
This module is intended for OEM integrator. The OEM integrator is responsible for the compliance to all the rules that apply to the product into which this certified RF module is integrated. Additional testing and certification may be necessary when multiple modules are used. 20cm minimum distance has to be able to be maintained between the antenna and the users for the host this module is integrated into. Under such configuration, the IC RSS-102 radiation exposure limits set forth for an population/uncontrolled environment can be satisfied. Any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. USERS MANUAL OF THE END PRODUCT:
In the users manual of the end product, the end user has to be informed to keep at least 20cm separation with the antenna while this end product is installed and operated. The end user has to be informed that the IC radio-frequency exposure guidelines for an uncontrolled environment can be satisfied. The end user has to also be informed that any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. LABEL OF THE END PRODUCT:
The final end product must be labeled in a visible area with the following " Contains IC: 4491A-WCBN4521R18 ". The Host Model Number (HMN) must be indicated at any location on the exterior of the end product or product packaging or product literature which shall be available with the end product or online.