PRODUCT SPECIFICATION 802.11a/b/g/n/ac, 2T2R Wireless LAN USB2.0 Module WN4515L Realtek RTL8812AU Version 1.0 User Manual
* This document contains confidential proprietary information and is property of LTC. The contents of this document should not be disclosed to unauthorized persons without the written consent of LTC Page 1/13 CONTENT FCC WARING STATEMENT .......................................................................................................... 3 IC WARING STATEMENT .............................................................................................................. 4 PRODUCT FEATURES .................................................................................................................... 6 PRODUCT SPECIFICATIONS ........................................................................................................ 7 MAIN CHIPSET ....................................................................................................................................... 7 FUNCTIONAL SPECIFICATIONS ............................................................................................................... 7 RECOMMENDED OPERATION CONDITIONS .......................................................................... 9 DC CHARACTERISTICS ................................................................................................................. 9 PIN ASSIGNMENT .......................................................................................................................... 10 CONNECTOR SPEC ....................................................................................................................... 10 MECHANICAL ................................................................................................................................ 11 METAL ANTENNA SPEC .................................................................................................................... 12 EEPROM INFORMATION ............................................................................................................ 13 ENVIRONMENTAL ........................................................................................................................ 13 OPERATING .......................................................................................................................................... 13 STORAGE .............................................................................................................................................. 13 Page 2/13 FCC WARING STATEMENT FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. CAUTION:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference and
(2) This device must accept any interference received, including interference that may cause undesired operation. RF exposure warning This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment must be installed and operated in accordance with provided instructions and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Page 3/13 End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: "Contains FCC ID:
PPQ-WN4515L Information for the OEMs and Integrators The following statement must be included with all versions of this document supplied to an OEM or integrator, but should not be distributed to the end user. 1) This device is intended for OEM integrators only. 2) Please see the full Grant of Equipment document for other restrictions. This device is operation in 5.15 5.25GHz frequency range, then restricted in indoor use only, Outdoor operations in the 5150~5250MHz is prohibit. This device is slave equipment, the device is not radar detection and not ad-hoc operation in the DFS band. IC WARING STATEMENT Canada, avis d'Industry Canada (IC) This device complies with Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions:
(1)This device may not cause interference; and
(2)This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. This device is restricted to indoor use. Page 4/13 OEM integrator is still responsible for testing their end product for any additional compliance requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, etc.). IMPORTANT NOTE: In the event that these conditions cannot be met (for example certain laptop configurations or co-location with another transmitter), then the IC authorization is no longer considered valid and the IC No. cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate IC authorization. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: Contains transmitter module IC: 4491A-WN4515L. Contient le module d'mission IC: 4491A-WN4515L This radio transmitter (4491A-WN4515L) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Gain(dBi) Ant. Model Type PIFA PIFA PIFA PIFA PIFA PIFA PIFA Brand PSA PSA PSA PSA PSA PSA PSA RFMTA401029IMLB701 RFMTA401029IMLB701 RFMTA401029IMLB701 RFMTA401029IMLB701 RFMTA401029IMLB701 RFMTA401029IMLB701 RFMTA100600NNLB002 5G 1 3.16 2 2.90 3 1.99 4 1.97 5 1.85 6 1.72 7 2.66 Le prsent metteur radio (4491A-WN4515L) a t approuv par Industrie Canada pour fonctionner avec les types d'antenne numrs ci-dessous et ayant un gain admissible maximal et l'impdance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est suprieur au gain maximal indiqu, sont strictement interdits pour l'exploitation de l'metteur. 2.4G 2.60 1.89 1.75 1.71 1.72 1.62 0.52 Ant. 1 2 3 4 5 6 7 Brand PSA PSA PSA PSA PSA PSA PSA Model RFMTA401029IMLB701 RFMTA401029IMLB701 RFMTA401029IMLB701 RFMTA401029IMLB701 RFMTA401029IMLB701 RFMTA401029IMLB701 RFMTA100600NNLB002 Type PIFA PIFA PIFA PIFA PIFA PIFA PIFA Page 5/13 Gain(dBi) 2.4G 2.60 1.89 1.75 1.71 1.72 1.62 0.52 5G 3.16 2.90 1.99 1.97 1.85 1.72 2.66 The transmitter module may not be co-located with any other transmitter or antenna. Le module metteur peut ne pas tre complant avec un autre metteur ou antenne. Radio Frequency (RF) Exposure Information The radiated output power of the Wireless Device is below the Industry Canada (IC) radio frequency exposure limits. The Wireless Device should be used in such a manner such that the potential for human contact during normal operation is minimized. This device has also been evaluated and shown compliant with the IC RF Exposure limits under mobile exposure conditions. (antennas are greater than 20cm from a person's body). Informations concernant l'exposition aux frquences radio (RF) La puissance de sortie mise par lappareil de sans fil est infrieure la limite d'exposition aux frquences radio d'Industry Canada (IC). Utilisez lappareil de sans fil de faon minimiser les contacts humains lors du fonctionnement normal. Ce priphrique a galement t valu et dmontr conforme aux limites d'exposition aux RF d'IC dans des conditions d'exposition des appareils mobiles (les antennes se situent moins de 20 cm du corps d'une personne). PRODUCT FEATURES Operate at ISM frequency Band (2.4/5GHz) IEEE Standards Support, 802.11a, 802.11b, 802.11g, 802.11n,and 802.11ac USB 2.0 support for date rates up to 12Mbps full speed and 480Mbps high speed Enterprise level security supporting: WEP 64/128, WPA, WPA2, WAPI Support 2 transmission and 2 receiving, transmission rate can up to 300Mbps
(Physical Rate) in 802.11n; and 866.7Mbps in 802.11ac Wi-Fi Direct supports wireless peer to peer applications RoHS compliance Low Halogen compliance Page 6/13 PRODUCT SPECIFICATIONS MAIN CHIPSET MAC/ Baseband/ RF: Realtek 8812AU-VS-CG FUNCTIONAL SPECIFICATIONS WiFi Function Standard Bus Interface Data Rate Media Access Control Modulation Techniques Network Architecture Operation Channel Frequency Range Transmit Output Power 2x2
(Tolerance: 1.5dBm) IEEE802.11a; IEEE802.11b; IEEE 802.11g; IEEE 802.11n; IEEE802.11ac Universal Serial Bus (USB2.0) 802.11a:
54, 48, 36, 24, 18, 12, 9, 6 Mbps 802.11b:
802.11g:
802.11n:
802.11ac:
11, 5.5, 2, 1 Mbps 54, 48, 36, 24, 18, 12, 9, 6 Mbps MCS 0 to 15 for HT20MHz MCS 0 to 15 for HT40MHz MCS 0 to 8 for HT20MHz MCS 0 to 9 for HT40MHz MCS 0 to 9 for HT80MHz 256QAM, 64QAM, 16QAM, QPSK, BPSK CSMA/CA with ACK 802.11a:
54, 48, 36, 24, 18, 12, 9, 6 Mbps CCK, DQPSK, DBPSK 64QAM, 16QAM, QPSK, BPSK 64QAM, 16QAM, QPSK, BPSK 802.11b:
802.11g:
802.11n:
802.11ac:
Ad-hoc mode (Peer-to-Peer) Infrastructure mode 5GHz 12: United States 19: Europe 8: Japan 2.4GHz 11: (Ch. 1-11) United States 13: (Ch. 1-13) Europe 14: (Ch. 1-14) Japan 802.11a/ac 5.15~5.85 GHz 802.11bg 2.400 ~ 2.4835 GHz 13 dBm@6-54Mbps 02.11a:
802.11b:
Page 7/13 15 dBm@1-11Mbps 802.11g:
14 dBm@6-54Mbps 802.11n(2.4GHz):
20MHz:
13dBm@MCS0-7 40MHz:
13dBm@MCS0-7 802.11n(5GHz):
20MHz:
12dBm@MCS0-7 40MHz:
12dBm@MCS0-7 802.11ac:
20MHz:
13dBm@MCS0-8 40MHz:
12dBm@MCS0-9 80MHz:
11dBm@MCS0-9 802.11a:
802.11b:
802.11g:
-85 dBm@6Mbps
-70 dBm@54Mbps
-83 dBm@11Mbps
-86 dBm@6Mbps
-70 dBm@54Mbps 802.11n(2.4GHz):
802.11n(5GHz):
20MHz
-69 dBm@MCS7 40MHz
-66 dBm@MCS7 20MHz
-69 dBm@MCS7 40MHz
-66 dBm@MCS7 20MHz
-63 dBm@MCS8 40MHz
-60 dBm@MCS9 80MHz
-57 dBm@MCS9 802.11ac:
Receiver Sensitivity Security Operating Voltage OS Supported WPA, WPA2, WPS, WEP 64/128, IEEE 802.1x, IEEE 802.11i 5V 10% I/O supply voltage Microsoft Windows Win7/Win8/Win8.1/Linux Mode Average 5G mA / W 490mA /
2.45W 332mA /
2.4G mA / W 420mA /
2.1W 270mA /
2.4G mA / W 700mA /
3.5W Peak 5G mA / W 930mA /
4.65W Page 8/13 Power Consumption Test Condition:
- Operate at HT40
- File Transmission TX RX Antenna Type 1.35W 1.66W 22mA /
0.11W 20mA /
0.1W Unassoci ated Idle Standby
@Wake up mode Metal Antenna on Board RECOMMENDED OPERATION CONDITIONS For Module Symbol VCC For IC Symbol VDD33 VDD12 Rating 5V Supply Voltage Rating 3.3V Supply Voltage 1.2V Supply Voltage DC CHARACTERISTICS Symbol Parameter VIL VIH VOL VOH Input Low Voltage Input High Voltage Output Low Voltage Output High Voltage Min 4.5 Min 3.0 1.10 Min
-
2.0 0 2.97 Typ 5 Typ 3.3 1.2 Typ 0 3.3
-
-
Max 5.5 Units V Max 3.6 1.23 Units V V Max 0.9 3.6 0.33 3.3 Units V V V Page 9/13 PIN ASSIGNMENT Pin Define
+3.3V
+3.3V USB_D-
USB_D+
GND WAKE#
RESET#
GND Pin. 1 2 3 4 5 6 7 8 Description 3.3V source 3.3V source USB Data-
USB Data+
Ground Wake up system via wifi, low active System reset RTL8812AU, low active Ground Status YES YES YES YES YES YES YES YES CONNECTOR SPEC Page 10/13 MECHANICAL Page 11/13 METAL ANTENNA SPEC On Board Antenna for WiFi (Qty:1pcs) Page 12/13 EEPROM INFORMATION US 0x25 0x0BDA 0x881A Reg Domain Vendor ID Product ID ENVIRONMENTAL Operating Operating Temperature: 0 to 70 C Relevant Humidity: 5-90% (non-condensing) Storage Temperature: -40 to 85 C (-40 to 185 F) Relevant Humidity: 5-95% (non-condensing) Page 13/13