|
app
s
|
Applicant Information
|
|
|
1 2
|
Effective |
2017-11-30
|
|
1 2
|
Applicant's complete, legal business name |
LITE-ON Technology Corp.
|
|
1 2
|
FCC Registration Number (FRN) |
0014765044
|
|
1 2
|
Physical Address |
Bldg. C, 90, Chien 1 Rd., Chung-Ho
|
|
1 2
|
New Taipei City,, N/A 23585
|
|
1 2
|
Taiwan
|
|
|
app
s
|
TCB Information
|
|
1 2
|
TCB Application Email Address |
T******@TIMCOENGR.COM
|
|
1 2
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
|
app
s
|
FCC ID
|
|
1 2
|
Grantee Code |
PPQ
|
|
1 2
|
Equipment Product Code |
WM862FEMD
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
1 2
|
Name |
T****** W********
|
|
1 2
|
Title |
Deputy Director(R & D Division)
|
|
1 2
|
Telephone Number |
86-22******** Extension:
|
|
1 2
|
Fax Number |
86-22********
|
|
1 2
|
E-mail |
t******@liteon.com
|
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
|
app
s
|
Confidentiality (long or short term)
|
| 1 2 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
| 1 2 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| 1 2 |
Is this application for software defined/cognitive radio authorization? | No |
| 1 2 | Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| 1 2 | DTS - Digital Transmission System |
| 1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 802.11ac 2x2 MIMO PCI Express Mini Card |
| 1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
| 1 2 | Modular Equipment Type | Single Modular Approval |
| 1 2 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment |
| 1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
| 1 2 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| 1 2 | Grant Comments | Single Modular Approval. Power listed is maximum combined output power conducted. This device is restricted to indoor use only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 28 cm from all persons. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 6.0 dBi. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device has 20, 40, and 80 MHz bandwidth modes. |
| 1 2 | Single Modular Approval. Power listed is maximum combined output power conducted. This device is restricted to indoor use only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 28 cm from all persons. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 6.5 dBi. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device has 20 and 40 MHz bandwidth modes. |
| 1 2 | Is there an equipment authorization waiver associated with this application? | No |
| 1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
1 2
|
Firm Name |
SPORTON International Inc.
|
|
1 2
|
Name |
A******** C****
|
|
1 2
|
Telephone Number |
886-3******** Extension:
|
|
1 2
|
Fax Number |
886-3********
|
|
1 2
|
E-mail |
a******@sporton.com.tw
|
|