802.11n, Dual Band 2T2R Wireless LAN USB Module WN4516R User Manual
* This document contains confidential proprietary information and is property of LTC. The contents of this document should not be disclosed to unauthorized persons without the written consent of LTC Page 1/15 CONTENT FCC WARING STATEMENT .......................................................................................................... 3 IC WARING STATEMENT .............................................................................................................. 4 PRODUCT FEATURES .................................................................................................................... 5 PRODUCT SPECIFICATIONS ........................................................................................................ 6 MAIN CHIPSET ....................................................................................................................................... 6 FUNCTIONAL SPECIFICATIONS ............................................................................................................... 6 PIN ASSIGMENT ............................................................................................................................... 8 USB CONNECTOR SPEC ................................................................................................................. 8 MECHANICAL .................................................................................................................................. 9 SHIELDING CASE SPEC ............................................................................................................... 10 ANTENNA SPEC ............................................................................................................................. 11 BLOCK DIAGRAM ......................................................................................................................... 12 MODULE PHOTO ........................................................................................................................... 12 EEPROM INFORMATION ............................................................................................................ 13 ENVIRONMENTAL ........................................................................................................................ 13 OPERATING .......................................................................................................................................... 13 STORAGE .............................................................................................................................................. 13 PACKING DRAWING .................................................................................................................... 14 Page 2/15 End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: "Contains FCC ID:
PPQ-WN4516R and Contains transmitter module IC: 4491A - WN4516R Information for the OEMs and Integrators The following statement must be included with all versions of this document supplied to an OEM or integrator, but should not be distributed to the end user. 1) This device is intended for OEM integrators only. 2) Please see the full Grant of Equipment document for other restrictions. IC WARING STATEMENT Canada, Industry Canada (IC) Notices This Class B digital apparatus complies with Canadian ICES-003 and RSS-210. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Canada, avis d'Industry Canada (IC) Cet appareil numrique de classe B est conforme aux normes canadiennes ICES-003 et RSS-210. Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas causer d'interfrence et (2) cet appareil doit accepter toute interfrence, notamment les interfrences qui peuvent affecter son fonctionnement. Radio Frequency (RF) Exposure Information The radiated output power of the Wireless Device is below the Industry Canada (IC) radio frequency exposure limits. The Wireless Device should be used in such a manner such that the potential for human contact during normal operation is minimized. Page 4/15 This device has also been evaluated and shown compliant with the IC RF Exposure limits under mobile exposure conditions. (antennas are greater than 20cm from a person's body). Informations concernant l'exposition aux frquences radio (RF) La puissance de sortie mise par lappareil de sans fil est infrieure la limite d'exposition aux frquences radio d'Industry Canada (IC). Utilisez lappareil de sans fil de faon minimiser les contacts humains lors du fonctionnement normal. Ce priphrique a galement t valu et dmontr conforme aux limites d'exposition aux RF d'IC dans des conditions d'exposition des appareils mobiles (les antennes se situent moins de 20 cm du corps d'une personne). PRODUCT FEATURES Operate at ISM frequency Band (2.4 / 5GHz) IEEE Standards Support, 802.11a , 802.11b, 802.11g and 802.11n Support USB 2.0 host interface Enterprise level security supporting: WPA, WPA2, WPS2.0, WAPI Two-stream IEEE 802.11n support for 20MHz and 40MHz bandwidth channels provides PHY layer rates up to 300Mbps Integrated LNA, PA and T/R switch Support Wi-Fi Direct RoHS compliance Low Halogen compliance Page 5/15 PRODUCT SPECIFICATIONS MAIN CHIPSET MAC/ Baseband/ RF: MediaTek MT7600U FUNCTIONAL SPECIFICATIONS Wi-Fi Function Standard IEEE802.11a;IEEE802.11b; IEEE 802.11g; IEEE 802.11n Bus Interface USB2.0 802.11a:
54, 48, 36, 24, 18, 12, 9, 6 Mbps 802.11b:
11, 5.5, 2, 1 Mbps Data Rate 802.11g:
54, 48, 36, 24, 18, 12, 9, 6 Mbps 802.11n:
MCS 0 to 15 for HT20MHz MCS 0 to 15 for HT40MHz Media Access Control CSMA/CA with ACK Modulation Techniques Network Architecture Operation Channel Frequency Range Transmit Output Power 2x2 MAX: 16.5dBm
(Tolerance: 1.5dBm) 802.11a:
64QAM, 16QAM, QPSK, BPSK 802.11b:
CCK, DQPSK, DBPSK 802.11g:
64QAM, 16QAM, QPSK, BPSK 802.11n:
64QAM, 16QAM, QPSK, BPSK Ad-hoc mode (Peer-to-Peer) Infrastructure mode 2.4GHz 11: (Ch. 1-11) United States 13: (Ch. 1-13) Europe 14: (Ch. 1-14) Japan 5GHz 21: USA 19: EU 8: Japan 802.11bg 2.400 ~ 2.4835 GHz 802.11a 5.15 ~ 5.85 GHz 802.11a:
12 dBm@6Mbps 12 dBm@54Mbps 802.11b:
15 dBm@1Mbps 15 dBm@11Mbps 802.11g:
14 dBm@6Mbps Page 6/15 Receiver Sensitivity 14 dBm@54Mbps 802.11n:
2.4G 20MHz:
13 dBm@MCS0 13 dBm@MCS7 13 dBm@MCS15 40MHz:
13 dBm@MCS0 13 dBm@MCS7 13 dBm@MCS15 5G 20MHz:
11 dBm@MCS0 11 dBm@MCS7 11 dBm@MCS15 40MHz:
11 dBm@MCS0 11 dBm@MCS7 11 dBm@MCS15 802.11a:
-86 dBm@6Mbps
-70 dBm@54Mbps 802.11b:
-88 dBm@1Mbps
-82 dBm@11Mbps 802.11g:
-86 dBm@6Mbps
-71 dBm@54Mbps 802.11n:
2.4G/5G 20MHz
-86 dBm@MCS0
-68 dBm@MCS7
-68 dBm@MCS15 40MHz
-83 dBm@MCS0
-65 dBm@MCS7
-65 dBm@MCS15 Security WPA, WPA2, WPS, WEP 64b&128bit, IEEE 802.1X, IEEE 802.11i Operating Voltage 3.3V 5% I/O supply voltage OS Supported Linux based Power Consumption Average TX Mode:
TBD mA RX Mode:
TBD mA Standby Mode:
TBD mA Radio Off:
TBD mA Max 1.2A Strongly recommend TV platform has to fulfill output current at least 1A Antenna Type Metal antenna Page 7/15 PIN ASSIGMENT Pin. Pin Define Status
+3.3V USB_D-
USB_D+
GND RESET#
GND 1 2 3 4 5 6 YES YES YES YES YES YES USB CONNECTOR SPEC Page 8/15 MECHANICAL Page 9/15 SHIELDING CASE SPEC Manufacture: Hun Pai() Page 10/15 ANTENNA SPEC Manufacture: Hong Lin Page 11/15 BLOCK DIAGRAM MODULE PHOTO Page 12/15 EEPROM INFORMATION World Wide 2.4G/5G Reg Domain Read from registry; Control by driver Offset 0x38 for 5G: 0xFF Offset 0x39 for 2.4G: 0xFF Vendor ID Product ID 0x0471 0x2126 ENVIRONMENTAL Operating Operating Temperature: 0 to 70 C (32 to 158 F) Relative Humidity: 5-90% (non-condensing) Storage Temperature: -20 to 70 C (-4 to 158 F) Relative Humidity: 5-95% (non-condensing) Page 13/15 PACKING DRAWING Tray Page 14/15 Page 15/15