Schematic diagram MFB VOL +
VOL -
MIC 60mm BMK-201 User Manual
() m m 0 6 LED USB Lanyard
(-)
() Charge the unit Charging starts when the unit and the computer are connected. Charging is completed in about 3.5 hours at most and the indicator goes off automatically. The indicator is lit during charging. 4 Make the Bluetooth connection from the Bluetooth device. Connecting with the paired device Pairing and connecting with the Bluetooth device 1 Place the Bluetooth device within 1 meter of this unit. 2 Long press MFB button up to 6 seconds to turn on this unit and enters pairing mode. (you can hear 2 beep prompts) The indicator flashes fast in pairing mode for 2 minutes. 3 Perform the pairing procedure on the Bluetooth device to detect this unit.When the list of detected devices appears on the display of the Bluetooth device, select BMK-201 V0.x If passkey input is required on the display of a Bluetooth device, input 0000. 1 Press MFB button for 3 seconds to turn on the unit.(you can hear the long prompt and the indicator is lit solidly for 5 seconds) 2 Make the Bluetooth connection from the Bluetooth device. Listening and Calling Operate the unit after making Bluetooth connection Listening to music Profile: A2DP Start playback on the Bluetooth device. Making a call/Receiving a call Profile: HSP, HFP Operate your mobile phone to make a call.
- To terminate a call, press the MFB button on the unit. Press the MFB button on the unit when an incoming call arrives.
- Operate in the same way when an incoming call arrives while you are listening to the music. Turn off the unit Press MFB button for 3 seconds to turn off the unit.(you can hear 3 beep prompts and the indicator is lit)
(1)
(2)
(3)
): 100p
): no
(
(
black
(
(
(
):
): 60x60mm
):+-0.5mm MODEL No. BMK-201 PART NAME User Manual APPROVED CHECKED DESIGNED PART No. 515300108247 blue 2013.10.08 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digi tal device, pursuant to part 15 of the FCC rules. These limits are designed to provide r easonable protection against harmful interference in a residential installation. This equ ipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio co mmunications. However, there is no guarantee that interference will not occur in a par ticular installation. If this equipment does cause harmful interference to radio or televi sion reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measu res: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the recei ver is connected. Consult the dealer or an experienced radio/TV technician for help. You are cautioned that changes or modifications not expressly approved by the party r esponsible for compliance could void your authority to operate the equipm ent. FCC RF Radiation Exposure Statement: 1. This Transmitter must not be colocated or operating in conjunction with any other antenna or transmitter. 2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.