User Manual AK1A AK1A User Manual 17.12.2018 KFM The AK1A (vehicle key) is a component of a driving authorisation system of a car which further comprises of the body controller module BCMevo. The components exchange encrypted data for car access, to start the engine and to locate the key. The AK1A contains three buttons for car access. By pressing the dedicated button the AK1A sends over RF authorization data to the control unit to open the doors. The 2nd button releases data to lock the doors. A third button is dedicated to open the trunk deck. An additional PANIC button is implemented optional for the US market. If the PANIC button is pushed twice or held down for two seconds, the car alarm will start and can be stopped by pressing this button again. Moreover car access is also released after touching the door handles. The key is waken by the magnetic field of the LF antennas, driven by the BCMevo. The AK1A sends over RF encrypted data in return for authentication. In case the battery is low car access is possible by means of an integrated mechanic emergency key. The AK1A is then to be placed into a dedicated slot inside the centre console to be powered wireless by means of a magnetic field. Open Button
- To unlock the vehicles doors when the button is pressed short.
-
In case the button is pressed long, the windows will open additionally. Close Button
- Locks the vehicles doors when the button is pressed short.
- When the button is pressed, long the windows will close additionally. Trunk Button
- To unlock and open the vehicles trunk lid, push the button twice. Open Close Trunk 6 0
. 2 0 1 m r o f X:\CEQ\FuZu_Homologation\Projekte\VW-Konzern\AUDI\Audi MLBevo ID-Geber MEMS AK1A\03 Allgemeine Produktbeschreibung\2018-12-17_AK1A_UserManual.docx Seite 1 von 1 Radio equipment authorization to FCC in USA for AK1A NOTICE:
The enclosed hardware device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received including interference that may cause undesired operation. Changes or modifications made to this equipment not expressly approved by (manufacturer name) may void the FCC authorization to operate this equipment. Radio equipment authorization to RSS-210 in Canada for AK1A NOTICE:
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
(1) Lappareil ne doit pas produire de brouillage;
(2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. This Class [B] digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe [B] est conforme la norme NMB-003 du Canada.