FCC ID: 2ASP8UNOM8PLUS Mobile Phone

Q)rexwest USER MANUAL UNO MB PLUS Contact Menu DEVICE LAYOUT Left Soft Key Right Soft Key Press to select the Menu Option Prass to select the Contacts In the Home Screen Option In the Home Screen eo Confirm Button Q Powaer/Cancel Button Status Icons Turn the device ON or OFF 26

> Airplane Mode alll | GSM Network

(g]| No SIM Inserted [") SD Card Inserted

$[] ) meeting Mode Silent Mode Long Press the Power Button ( =~ ). Enter Unlock Pin, if necessary. To Unlock the device Press the Left Soft Key (), then the Star key ( * ) Make or answer a Call Press to confirm any command Long press to Power on/off device Press t |

Call Button Navigation Button Press to call loaded number or Navigate the device by pressing toaccept incoming call up, down, right, or left Battery Percentage Unread Message fal Indoor Mode 4 Outdoor Mode aX]

To make a call, go to the Home Screen and enter the number. Once the number is completed, Press the Call button (=) Changing Audio Profiles For it ing calls, to accept the call press the Call button

( ).To reject the call, press the Cancel button { =~) Calling Options Volcemall Button 9) Change Audio Profile Long press in Home Screen to L il to enter your volcemall change the Audio Profile Lock/Unlock Button Torch Light Button Long press In Home Screen to Long press In Home Screen to Lock device tum on the Light Torch Typing with keyboard Changing the Audio Profiles allows you to change the device volume levels. This menu will be found in Home Screen > Menu() > Settings > Profiles There are preset Audio Profiles:

1. General - These are the default audio levels recommend 2. Silent - These settings mute all audio notification 3. Meeting - These settings put all audio to vibration 4, Indoor - These settings make all audio levels low 5, Outdoor - These settings make all audio to max You can edit any of these settings by selecting Option () In these settings you will be able to change the ringtones, adjust volume levels, select ring type, and additlonal audio settings Phone Settings In the Contact Menu you can save, edit, import, and export your contacts. You can access your contacts by Home Screen > Contacts () Adding a New Contact Teo add a new contact select 1. Select Options LSK () 2. Select New 3. Insert a Profile Picture, Name, Mobile number, Home number, add to a group, or set the ringtone 4, Select Save LSK () Setting up Speed Dial To add a number to speed dial, follow the steps below:

1. Select Options LSK () 2, Select Others 3, Select Speed dial 4. Select which number you want to set up 5. Input the number 6, Select ok Importing/Exporting Contacts To import/export your contacts you must have them in vf Format:

1. Select Options LSK() 2. Select Import/Export 3, Select which one you would like to do The Browser Application allows you to navigate the World Wide Web, To enter the browser, follow the steps below:

Home Screen > Menu > Internet To search something online:

1. Select Input URL 2. Enter the website URL you would like to search Set up Network Account To set up the network GPRS setting:

1. Select Options LSK 2, Select Settings 3. Select SIM1/2 Network accounts 4, Select your SIM carrier from the preset network accounts a a ad To access pages faster, use bookmarks. There are preset pages Ike Facebook where you can check your account You can create your own bookmark pages as well. 1, Select Bookmarks 2. Select Options 3. Select Add 4, Select Bookmark 5. Input the information and save it The device uses T9 keyboard settings. These are the keys for each letter 1 - Press multiple times to select different punctuation marks 2-ABC 3-DEF 4-GHI 5-JKL 6-MNO 7-PQRS 8-TUV 9-WXYZ Q- Space

*- All the symbols in this menu

#- Allows you to change Abc, abc, ABC, 123, or writing lang. To create text, see this sample:

To spell out the work World W- Press number 9 key one time 0 - Press number 6 key three times. r-Press number 7 key three times

|- Press number 5 key three times d- Press number 3 key one time To input a number in text 1. Select the # key and select 123 2. input the number To access the phone settings, go to:

Home Screen > Menu > Settings > Phone Settings In this menu you will be able to set time, set date, change time format, change date format, or change update time settings Language Settings This menu can allow you to change the language from English, French, Spanish, or Portuguese This menu allows you to change the home screen shortcut keys to different applications. Auto power on/off This menu can set your device to automatically power on/off on preset times. This menu shows the battery percentage of the device.

[Restorefactory This menu will erase all data on the device, password is 0000 To Enter Speaker Mode during a phone call, press the Confirmation Button To Adjust the volume levels, press up and down on the Navigation Button To End the call press the Cancel button ( >") For more options, select Menu by pressing Left Soft Key { ) In this menu you can Add a new call, Place call on Hold, Start recording call, Mute Call, adjust volume, use contacts, call logs, or open messages. Send Text/Multimedia Messages Enter the Message Application by entering the Menu (Left Soft Key) and scroll up with the navigation button to the Application Message. Select Write message, (1) for Text Message press SMS or

(2) for Multimedia Message press MMS,

(1) to Enter the recipient, enter the phone number. Scroll down to enter the message portion of the text. Once complete, select Options and Select Send

(2) to Enter the recipient, enter the phone number. Enter the desired information (Subject, Text, Image, Video or Audio). Once complete, select Options and Select Send To View the received messages, press Inbox. To View the sending messages, press Outbox. To View the draft messages, press Draft. To View the sent messages, press Sentbox. Display Settings In Display setting you are able to change your wallpaper, adjust brightness settings, change screen timeout, change the keypad lock time, and change your screensaver settings. You will find this menu in Homescreen > Menu() > Settings > Display Settings WARNING Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause interference

(2) this device must accept any interference, including interference that may cause undesired operation of the device. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee taht interference will not occur in a particular installation If this equipment does cause harmful interference to radio or televsion reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet an a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

@ SAR tests are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands, although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value, in general, the closer you are to a wireless base station antenna, the lower the power output. Before a new device is a available for sale to the public, it must be tested and certified to the FCC that it does not exceed the exposure limit established by the FCC, Tests for each device are performed in positions and locations as required by the FCC. For body worn operation, this device has been tested and meets the FCC RF exposure guidelines when used with an accessory designated for this product or when used with an accessory that contains no metal and that Positions the handset a minimum of 5 mm from the body. Non-compliance with the above restrictions may result in violation of RF exposure guidelines.

MAXWEST COMMUNICATION LIMITED ADD: ROOM 1802B FORTRESS TOWER 250 KING'S ROAD NORTH POINT, Hong Kong TEL: 00852-3464 9345 FAX: 00852-3007 9834 E-mail: celina.max@foxmail.com Date: 2019-12-20 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Dear Sir/Madam, Re: Project Authorization Letter We, MAXWEST COMMUNICATION LIMITED, hereby authorize Bay Area Compliance Laboratories Corp to act as a laboratory for testing and test report generation for the following project(s):

(Product description: Mobile Phone, FCC ID: 2ASP8UNOM8PLUS) The chipset SC6531E which support max 4 slots(class 12), for this device only support 2 slots(calss 10), our manufacture has closed the 2 slots by software when they are producing,. Sincerely, Signature Printed Name: Celina He Title: Manager

MAXWEST COMMUNICATION LIMITED ADD: ROOM 1802B FORTRESS TOWER 250 KING'S ROAD NORTH POINT, Hong Kong TEL: 00852-3464 9345 FAX: 00852-3007 9834 E-mail: celina.max@foxmail.com FCC Authorization Date: 2019-11-22 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern:

We , MAXWEST COMMUNICATION LIMITED, Hereby authorizes Bay Area Compliance Laboratories Corporation to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratory Corporation on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Clients signature Printed Name: Celina He Title: Manager QA-FR-170-B

MAXWEST COMMUNICATION LIMITED Add: ROOM 1802B FORTRESS TOWER 250 KING'S ROAD NORTH POINT, Hong Kong Tel: 00852-3464 9345 FAX: 00852-3007 9834 Email: celina.max@foxmail.com FCC Confidential Authorization Date:2019-11-22 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: 2ASP8UNOM8PLUS In accordance with Sections 0.457 and 0.459 of the Commissions Rules, MAXWEST COMMUNICATION LIMITED, hereby requests long-term confidential treatment of information accompanying this application as outlined below:

Block Diagram Schematics Operation Description Parts List/Tune up procedure (for licensed devices) The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely, Signature:

Celina He Manager QA-FR-171-A