FCC ID: 2AYGE-MLSH8 Remote Control

Model: MLSH8 ISED Certification No.:26807-MLSH8 FCC ID: 2AYGE-MLSH8 Manufacturer: MeLaSen Electronics Ltd. Address:No.29 Industrial Road, Xiaolan Industrial Estate, Xiaolan Town, Zhongshan, 528415 Guangdong, P.R. China REMOTE CONTROL OPERATING INSTRUCTIONS 1. All ON/ OFF button. 2. Press and release the button, the fan will turn ON and OFF accordingly. 3. Press and release the button, the light will turn ON and OFF accordingly. 4. Press + to increase speed and - to decrease speed. You can select fan speed 1-6. 5. Press + to increase brightness and - to decrease brightness. 6. Press and release the button will activate the Comfort Breeze mode. Alternates through speeds 1-5. 7. Press and release the button to change the light colour from warm light to white light. 8. Press the (2H/4H/8H) buttons to automatically turn the fan off after 2, 4 or 8 hours. Install two 1.5V battery into the remote control. To prevent damage to the remote control, remove the battery if not used for long periods of time. LED light 2 4 6 8 1 3 5 7 ALL ON / OFF ON / OFF 6 SPEED BRIGHTNESS BREEZE COLOR TEMP. HR2 HR4 HR8 TIMER WARNING: Do not short-circuit, disassemble, heat up, connect improperly, or dispose of used batteries in re. Do not recharge or mix batteries with used or other battery types. Immediately remove used batteries. WARNING: a) The cells shall be disposed of properly, including keeping them away from children; and b) Even used cells may cause injury. Chemical Burn Hazard. Keep batteries away WARNING:

from children. Always completely secure the battery compartment. If the battery compartment does not close securely, stop using the product, remove the batteries, and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. LEARNING PROCESS NOTE: After the AC power is on, do not press any other button on the remote control before pressing the (ON/OFF) button. Doing so will cause the procedure to fail. Should you desire to use another remote control unit with your new fan, install one using the steps below:

Turn the main power source off to begin the learning process. Return the power to the unit. Within 3 seconds of turning the fans AC power ON, press and release the button and then press and release the button to enter the learning function. A beeping sound is emitted when pairing is complete. INSTALLING THE REMOTE CONTROL HOLDER Install the remote control holder spacer onto the wall using two remote control holder screws, and then attached the remote control holder onto the spacer, ensure two parts t together and no gaps, install the remote control holder screws. spacer Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitationestautorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareildoit accepter tout brouillageradiolectriquesubi, mmesi le brouillageest susceptible d'encompromettre le fonctionnement.

Remote Control Model: MLSH8 FCC ID: 2AYGE-MLSH8 IC: 26807-MLSH8 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.(2)This device must accept any interference received. including interference that may cause undesired.

MeLaSenElectronicsCO.,LTD Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 03-01-2023 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID: 2AYGE-MLSH8 MeLaSen Electronics CO., LTD (the applicant) certifies that, as of the date of the filing of the application, TianHeng Consulting, LLC is our designated U.S. agent for service of process for the above referenced FCC ID. MeLaSen Electronics CO., LTD accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. TianHeng Consulting, LLC accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Sincerely, Designated U.S. Agent Information:

Name:TianHeng Consulting, LLC Contact Person: Hualing Dong FRN:0033401258 Address: 392 Andover Street, Wilmington, MA 01887, United States Tel.: +1 617-997-4010 Email: tianhengconsulting@gmail.com U.S. Agent Signature:

Applicant:

Company Name:MeLaSen Electronics CO., LTD Grantee Code:2AYGE Contact Name:Rui Ye Address:No.29 Industrial Road, Xiaolan Industrial Estate, Xiaolan Town, Zhongshan, 528415 Guangdong, P.R. China Tel.: +86-13532008828 Email:Yerui8828@163.com Applicant Signature:

Rui Ye Rui Ye, General ManagerHualing Dong, President

MeLaSenElectronicsCo.,Ltd. FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:02272023 Ref:AttestationStatementsPart2.911(d)(5)(i)Filing FCCID:2AYGEMLSH8 MeLaSenElectronicsCo.,Ltd.(theapplicant)certifiesthattheequipmentforwhichauthorizationis soughtisnotcoveredequipmentprohibitedfromreceivinganequipmentauthorizationpursuantto section2.903oftheFCCrules. Sincerely,

(Applicantsignature) RuiYe/Generalmanager Rui Ye Rev 1/26/2023 MeLaSenElectronicsCo.,Ltd. FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:02272023 Ref:AttestationStatementsPart2.911(d)(5)(ii)Filing FCCID:2AYGEMLSH8 MeLaSenElectronicsCo.,Ltd.(theapplicant)certifiesthat,asofthedateofthefilingoftheapplication, theapplicantisnotidentifiedontheCoveredListasanentityproducingcoveredequipment. Sincerely,

(Applicantsignature) RuiYe/Generalmanager Rui Ye Rev 1/26/2023

MeLaSen Electronics Co., Ltd. Date:Feb. 27, 2023 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID:2AYGE-MLSH8 Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

Exhibit Type Schematics Block Diagram Operational Description File Name Schematic.pdf Block Diagram.pdf Operational Description.pdf The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, MeLaSen Electronics Co., Ltd. Signature Rui Ye Rui Ye/General manager Typed name and Title

MeLaSen Electronics Co., Ltd. Declaration of RF Exposure Compliance Product Information:

Product Name: Remote Control Model: MLSH8 FCC ID: 2AYGE-MLSH8 ATTESTATION:

I attest that the radiocommunication apparatus meets the exemption from routine evaluation for RF Exposure according to 1.1307 (b)(3)(i)(A); that the Technical Brief was prepared and the information contained therein is correct; that the device evaluation was performed or supervised by me; that applicable measurement methods and evaluation methodologies have been followed. Name: Rui Ye Title: General Manager Company name of person signing: MeLaSen Electronics Co., Ltd. Signature:

Rui Ye DATE:

2023-03-11

(yyyy-mm-dd)

MeLaSen Electronics Co., Ltd. FCC ID:2AYGE-MLSH8 POWER OF ATTORNEY Date: Feb. 27, 2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern:

We, the undersigned, hereby authorize Waltek Testing Group (Foshan) Co., Ltd.

(Dara Zhou) on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Waltek Testing Group (Foshan) Co., Ltd. (Dara Zhou) on our behalf shall have the same effect as acts of our own. This authorization expires on Feb. 27, 2024 . This is to advise that we are in full compliance with the Anti-Drug Abuse Act. We, MeLaSen Electronics Co., Ltd. are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely, MeLaSen Electronics Co., Ltd. Signature Rui Ye Rui Ye/General manager Typed name and Title