FCC ID: 2AEVM1012709 Auto Keyfinder Magnetic

Printed in China Model Number: 1012709 1-800-374-2744 FOR TECHNICAL SUPPORT, PLEASE CALL ALL RIGHTS RESERVED. MERCHSOURCE, LLC. IRVINE, CA 92618. TRADEMARKS. DISTRIBUTED BY AND 2020 THE 77 LOGO) ARE TRADEMARKS OR REGISTERED SHARPER IMAGE NAME AND LOGOS (INCLUDING trademarks or copyright notice from this manual. permitted to alter, remove or reproduce any purpose without prior written permission. It is not distributed, displayed, published or used for any by US copyright law and may not be reproduced, The artwork and design of this manual are protected Slide down the remote into the lock position. included screws. 2. Lock the mount on the wall with the included sticky pad. 1. Stick the mount on the wall with the There are 2 Options MOUNTING THE REMOTE each fob. Its never been easier to find your keys. range of 45 feet, triggering distinctive alarms from up the lid it doubles as a wireless remote with a still forget to put your keys in their spot, simply pick in your drop spot or mounted to the wall. And if you attach to the tray lid whether its on the catchall tray to keep everything together. The magnetic fobs The Smart Track Key Finder + Storage makes it easy GETTING STARTED information for future reference. to use. Keep this sheet as it contains important Please read all instructions and warnings prior

+ STORAGE SMART TRACK KEY FINDER YOUR PURCHASE OF THE CONGRATULATIONS ON SMART TRACK KEY FINDER + STORAGE FCC STATEMENT Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. SAFETY INFORMATION AND WARNINGS All of the safety and operating instructions should be read, understood and followed before the unit is operated. SAFETY WARNINGS- PLEASE READ CAREFULLY This is not a childrens product. Small parts, especially the button cell batteries, pose a choking hazard to young children. If the product appears cracked or broken in any manner, discontinue use and discard immediately. BATTERY WARNING:

Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries. Alkaline batteries are recommended. Use only the specified voltage. Insert batteries using the correct polarity. Always use, replace, and recharge (if applicable) batteries under adult supervision. Do not attempt to charge non-rechargeable batteries. Do not short-circuit the battery supply terminals. Do not dispose of batteries in fire: batteries may explode or leak. Remove batteries before storing. Recycle or dispose of batteries according to federal, state, and local laws. Keep these instructions for future reference. KEEP THIS PACKAGING FOR REFERENCE AS IT CONTAINS IMPORTANT INFORMATION. WARNING Do not ingest the battery. Chemical burn hazard.

(The remote control supplied with) This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. SMART TRACK KEY FINDER + STORAGE OPERATION 1. Attach the fob to the key ring and attach your keys to the key ring. 2. Press the corresponding button on the wireless remote in order to locate the desired fob. 3. If the fob is in range (55 feet in an open area), it will emit an audible beep for a few seconds when you press the corresponding remote button. 4. If no beep is heard, wait 4 seconds and press the corresponding button again. You may have to change your location if the beep is still not heard. Continue pressing the button every 4 seconds while moving to different areas. NOTE: The wireless remote is portable, it can be removed from the provided Tabletop Cradle and carried with you to locate devices attached to a fob. PARTS 2 Key fobs 1 Wireless remote 1 Tray 3 Button cell batteries 1 Wall mount 1 Sticky pad 2 Key rings 2 Wall screws 1 Pin tool Key fobs Wireless remote Tray Button cell batteries Wall mount Sticky pad Key rings Wall screws Pin tool INSTALLING BATTERIES FOBS INSTALLING BATTERIES WIRELESS REMOTE Each requires 1 CR2032 button cell battery

(included). Requires 1 CR2032 1. Insert a pin into the hole on the fobs and push upwards to open the cover. See Figure A. 2. Insert a new battery into the metal slot, ensuring the + side of the battery is facing up. The FOB will make its characteristic beeping sound as it is inserted into the slot. 3. Align the arrow insided the cover to the hole position and press down to lock in the cover. See Figure B. 1. Using a coin, turn the battery cover counterclockwise to open it. 2. Insert the CR2023 battery cells according to the diagram instruction found on the inside portion of the tray. 3. Replace the battery cover and use a coin to secure it in place by turning it clockwise. Closing direction Figure A Figure B

MerchSource, LLC Declaration of Identical Product Hereby, Name of manufacturer: MerchSource, LLC Address:

City:

Country:

declares that:

7755 Irvine Center Drive, Irvine, CA 92618 Irvine United States Product description:

Auto Keyfinder Magnetic Type designation(s):

1014010 Trademark:

Family name is technically identical to:

Sharper Image Product description:

Auto Keyfinder Magnetic Type designation:

1012709 Sharper Image Trademark:

Certificate number

(if applicable) Date:

City:

Name:

Signature 2021.6.11 Irvine Alexandra Eintracht It is identical with the test model 1012709 except the model number for marketing purpose.

775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: certification@bureauveritas.com Website: https://www.cps.bureauveritas.com/

Confidentiality Request Letter Revision History From Reason for Amendment (current / obsolete) Initial Release (obsolete) Adding CFR 2.459 (obsolete) Updated company template & Added text box

(obsolete) Added IC confidentiality letter form (obsolete) Corrections to STC form. Added reference to KDB

(obsolete) Updated company logo (current) Updated References and Contact Info 1.0 1.0 2.0 3.0 4.0 5.0 6.0 To 1.0 2.0 3.0 4.0 5.0 6.0 7.0 Approved Date Nov-14-2006 August 11 - 2008 Jan-31-2012 March-26-2015 Nov-19-2015 Jun-26-2019 Aug-30-2020 SCS-F019: Confidentiality Request Letter Page 1 of 2 Rev 7.0 MerchSource, LLC 2021.6.11 To:

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046-1609 Cc:

Bureau Veritas Consumer Products Services Inc. 775 Montague Expressway Milpitas, CA 95035 Subject: Confidentiality Request for FCC ID: 2AEVM1012709 Pursuant to CFR 47 sections 0.457 and 0.459, we respectfully request permanent confidential treatment of the following Exhibits accompanying this application be held confidential:

Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent Permanent i Permanent Permanent Permanent Permanent Permanent i Exhibit Block Diagram External Photos Internal Photos Operational Description/ Theory of Operation Parts List Tune-Up Procedure Schematics Test Setup Photos Users Manual The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

To avoid premature release of sensitive information prior to marketing or release of the product to the public, the applicant requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 45 or 180 The applicant understands that disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, days; or for a specified date of not to exceed 180 days from the Grant Date Clients signature Clients name: Alexandra Eintracht Title : Compliance Manager Contact information / address : 7755 Irvine Center Drive, Irvine, CA 92618 Permanent confidentiality may be requested in accordance with FCC KDB 726920 SCS-F019: Confidentiality Request Letter Page 2 of 2 Rev 7.0