FCC ID: 2AEVM1014318 Selfie Ring Light Floor Standing with Remote

SELFIE RING LIGHT AGES 12+

USING YOUR SELFIE RING LIGHT 1. To make the sele light taller, extend the telescoping rod by gently pulling on the base of the sele ring light. It may help to place your foot on the base as you extend the rod to prevent it from moving around. size: 21 x 29.7 cm CONTENTS Circular Base Telescoping rod w/sele light & device mount USB power cable (connected to circular base and telescoping rod) Bluetooth remote with strap CR2032 3V lithium battery (installed in remote) FEATURES 10 different light colors including warm, cool, and neutral white lights USB cable (6 ft.) Telescoping stand 28 in. to 58 in. 180 degree of light rotation for different angles Lighting can be used with or without a device ASSEMBLY 1. Remove all components from the box and remove any excess packaging material. 2. Place the circular base at on the oor with the threaded opening pointing up. 3. Secure the telescoping rod by threading it into the base and rotating clockwise until it is fully ush and will no longer rotate. Please note that the power cable may protrude from the bottom of the rod making it dicult to secure it to the base. The telescoping rod can be extended slightly which will retract the cable making securing the rod to the base easier. 4. Mount the large circular sele light to the top of the stand. The vertical slats will go in between those on the stand. Remove the bolt from the large plastic adjustment knob and insert it on the end with the hexagonal opening. Tighten and secure the sele light to the stand by threading the large plastic adjustment knob on to the free end of the bolt clockwise until tight. This connection can be loosened when adjusting the angle of the sele light and then tightened again to hold it in place. 5. Attach the device mount to the back of the sele light by threading it clockwise until tight. 6. Secure the USB C male plug into the back of the sele light. 7. Take the USB A male plug extending from the base and insert into a USB wall adapter. For best performance, use a 5V, 2A USB wall adapter. Plugt the adapter into a wall outlet to power the Sele Ring Light. SAFETY WARNINGS: PLEASE READ BEFORE USE This is not a childrens product Keep out of reach of children. Product is not designed for all weather use. Keep away from moisture and extreme temperatures. This item has no user serviceable components. Do not disassemble. Do not use for anything other than its intended purpose. Inspect the product before every use. If the product appears worn, frayed, cracked, or broken in any manner, discontinue use and discard immediately. WARNING:

This product contains a Button or Coin Cell Battery. A swallowed Button or Coin Cell Battery can cause internal chemical burns in as little as two hours and lead to death. Dispose of used batteries immediately. Keep new and used batteries away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. FAO and FAO Schwarz names and logos are trademarks or registered trademarks. All rights reserved. www.fao.com Distributed by and 2021 MerchSource, LLC. Irvine, CA 92618. For customer support please call 1-888-987-6533. Printed in China 2. To adjust the angle of the light, loosen the large, knob directly under the sele light. Position the light at the desired angle, and then tighten the knob to hold it in place. 3. Place your device in the retractable device holder in the middle of the sele light. This holder is spring loaded. Pull it apart and slide your device inside. Your phone is now secure. 4. Adjust your phone orientation and position inside the light by moving the holder to the desired position. USING THE WIRELESS REMOTE CHANGE LIGHT COLOR ADJUST BRIGHTNESS LEVEL TAKE PHOTO OR START/STOP VIDEO ON/OFF 1. There are 10 brightness levels. They can be toggled through pressing the ADJUST BRIGHTNESS button. 2. There are 3 natural light settings (warm, cool, neutral) along with color light options. They can be toggled through by pressing the CHANGE LIGHT COLOR button. 3. To control your devices camera function wirelessly, you will need to connect your phone to the Bluetooth Wireless remote:

a. Ensure the remote is turned on. b. Ensure your devices Bluetooth is enabled and on. c. Search for the name SeleRingLight in your Bluetooth menu and select it. d. Your phone is now connected to the Bluetooth remote. 4. Switch on your devices camera function and set to photo or video. 5. The CAMERA button on the remote will now allow you to take either photos or start and stop your video camera. 6. To switch the light o, press and hold the ADJUST BRIGHTNESS button. FCC STATEMENTS Warning: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help The device must not be co-located or operating in conjunction with any other antenna or transmitter. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. WARNING:

Not intended for anyone under 14 years. Caution: Contains small parts which can pose a choking hazard. Keep out of reach of children. WARNING:

Contains Button or Coin Cell Battery. Hazardous if swallowed, see instructions. KEEP THIS INSTRUCTION MANUAL AS IT CONTAINS IMPORTANT INFORMATION FOR FUTURE REFERENCE. Due to continuous product improvements, the pictures on this manual may differ slightly from the actual product. SELFIE RING LIGHT AGES 12+

USING YOUR SELFIE RING LIGHT 1. To make the sele light taller, extend the telescoping rod by gently pulling on the base of the sele ring light. It may help to place your foot on the base as you extend the rod to prevent it from moving around. size: 21 x 29.7 cm CONTENTS Circular Base Telescoping rod w/sele light & device mount USB power cable (connected to circular base and telescoping rod) Bluetooth remote with strap CR2032 3V lithium battery (installed in remote) FEATURES 10 different light colors including warm, cool, and neutral white lights USB cable (6 ft.) Telescoping stand 28 in. to 58 in. 180 degree of light rotation for different angles Lighting can be used with or without a device ASSEMBLY 1. Remove all components from the box and remove any excess packaging material. 2. Place the circular base at on the oor with the threaded opening pointing up. 3. Secure the telescoping rod by threading it into the base and rotating clockwise until it is fully ush and will no longer rotate. Please note that the power cable may protrude from the bottom of the rod making it dicult to secure it to the base. The telescoping rod can be extended slightly which will retract the cable making securing the rod to the base easier. 4. Mount the large circular sele light to the top of the stand. The vertical slats will go in between those on the stand. Remove the bolt from the large plastic adjustment knob and insert it on the end with the hexagonal opening. Tighten and secure the sele light to the stand by threading the large plastic adjustment knob on to the free end of the bolt clockwise until tight. This connection can be loosened when adjusting the angle of the sele light and then tightened again to hold it in place. 5. Attach the device mount to the back of the sele light by threading it clockwise until tight. 6. Secure the USB C male plug into the back of the sele light. 7. Take the USB A male plug extending from the base and insert into a USB wall adapter. For best performance, use a 5V, 2A USB wall adapter. Plugt the adapter into a wall outlet to power the Sele Ring Light. 2. To adjust the angle of the light, loosen the large, knob directly under the sele light. Position the light at the desired angle, and then tighten the knob to hold it in place. 3. Place your device in the retractable device holder in the middle of the sele light. This holder is spring loaded. Pull it apart and slide your device inside. Your phone is now secure. 4. Adjust your phone orientation and position inside the light by moving the holder to the desired position. USING THE WIRELESS REMOTE CHANGE LIGHT COLOR ADJUST BRIGHTNESS LEVEL TAKE PHOTO OR START/STOP VIDEO ON/OFF 1. There are 10 brightness levels. They can be toggled through pressing the ADJUST BRIGHTNESS button. 2. There are 3 natural light settings (warm, cool, neutral) along with color light options. They can be toggled through by pressing the CHANGE LIGHT COLOR button. 3. To control your devices camera function wirelessly, you will need to connect your phone to the Bluetooth Wireless remote:

a. Ensure the remote is turned on. b. Ensure your devices Bluetooth is enabled and on. c. Search for the name SeleRingLight in your Bluetooth menu and select it. d. Your phone is now connected to the Bluetooth remote. 4. Switch on your devices camera function and set to photo or video. 5. The CAMERA button on the remote will now allow you to take either photos or start and stop your video camera. FCC STATEMENTS Warning: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help The device must not be co-located or operating in conjunction with any other antenna or transmitter. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. WARNING:

Not intended for anyone under 14 years. Caution: Contains small parts which can pose a choking hazard. Keep out of reach of children. WARNING:

Contains Button or Coin Cell Battery. Hazardous if swallowed, see instructions. SAFETY WARNINGS: PLEASE READ BEFORE USE This is not a childrens product Keep out of reach of children. Product is not designed for all weather use. Keep away from moisture and extreme temperatures. This item has no user serviceable components. Do not disassemble. Do not use for anything other than its intended purpose. Inspect the product before every use. If the product appears worn, frayed, cracked, or broken in any manner, discontinue use and discard immediately. WARNING:

This product contains a Button or Coin Cell Battery. A swallowed Button or Coin Cell Battery can cause internal chemical burns in as little as two hours and lead to death. Dispose of used batteries immediately. Keep new and used batteries away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. 2020 MerchSource, LLC. Irvine, CA 92618. All rights reserved. For technical support, please call 1-800-374-2744 The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. KEEP THIS INSTRUCTION MANUAL AS IT CONTAINS IMPORTANT INFORMATION FOR FUTURE REFERENCE. Due to continuous product improvements, the pictures on this manual may differ slightly from the actual product.

Legal Line over size: 90 x 18 mm typeface length: 3mm

; aa ~ 2 a 7 7 ; =

os e ' ~~ Pi i ie um - wo cae em Lo ==. ee

. i al a i fae E . a | ee, ei) " , on:

=, : , i J i) @ - eee te. is pe = ee i Ri =

we fw inks Deas el ae te ies Mee a eS * ete Nettles:

FCC Mark:

aver cite 120 27 ram na PSE Soe arose Fee Pe ea a typeface length: 3.3mm FCC ID: 2AEVMIOM318 |

Size: 12.12 mm* 1.06mm

775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: certification@bureauveritas.com Website: https://www.cps.bureauveritas.com/

Confidentiality Request Letter Revision History From Reason for Amendment (current / obsolete) Initial Release (obsolete) Adding CFR 2.459 (obsolete) Updated company template & Added text box

(obsolete) Added IC confidentiality letter form (obsolete) Corrections to STC form. Added reference to KDB

(obsolete) Updated company logo (current) Updated References and Contact Info 1.0 1.0 2.0 3.0 4.0 5.0 6.0 To 1.0 2.0 3.0 4.0 5.0 6.0 7.0 Approved Date Nov-14-2006 August 11 - 2008 Jan-31-2012 March-26-2015 Nov-19-2015 Jun-26-2019 Aug-30-2020 SCS-F019: Confidentiality Request Letter Page 1 of 2 Rev 7.0 MerchSource, LLC 2021.5.19 To:

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046-1609 Cc:

Bureau Veritas Consumer Products Services Inc. 775 Montague Expressway Milpitas, CA 95035 Subject: Confidentiality Request for FCC ID: 2AEVM1014318 Pursuant to CFR 47 sections 0.457 and 0.459, we respectfully request permanent confidential treatment of the following Exhibits accompanying this application be held confidential:

Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent Permanent i Permanent Permanent Permanent Permanent Permanent i Exhibit Block Diagram External Photos Internal Photos Operational Description/ Theory of Operation Parts List Tune-Up Procedure Schematics Test Setup Photos Users Manual The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

To avoid premature release of sensitive information prior to marketing or release of the product to the public, the applicant requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 45 or 180 The applicant understands that disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, days; or for a specified date of not to exceed 180 days from the Grant Date Clients signature Clients name: Alexandra Eintracht Title : Compliance Manager Contact information / address : 7755 Irvine Center Drive, Suite 100, Irvine, CA 92618 Permanent confidentiality may be requested in accordance with FCC KDB 726920 SCS-F019: Confidentiality Request Letter Page 2 of 2 Rev 7.0