FCC ID: 2AEVM1016930 Vanity Mirror Hollywood LED 11.8x17.8inch

the users authority to operate the equipment. approved by the party responsible for compliance could void Warning: Changes or modifications to this unit not expressly help. Consult the dealer or an experienced radio/TV technician for from that to which the receiver is connected. Connect the equipment into an outlet on a circuit different Increase the separation between the equipment and receiver. Reorient or relocate the receiving antenna. measures:

to correct the interference by one or more of the following turning the equipment off and on, the user is encouraged to try radio or television reception, which can be determined by installation. If this equipment does cause harmful interference to guarantee that interference will not occur in a particular interference to radio communications. However, there is no accordance with the instructions, may cause harmful radio frequency energy and, if not installed and used in installation. This equipment generates, uses and can radiate protection against harmful interference in a residential FCC Rules. These limits are designed to provide reasonable the limits for a Class B digital device, pursuant to part 15 of the Note: This equipment has been tested and found to comply with interference that may cause undesired operation. 2. This device must accept any interference received, including 1. This device may not cause harmful interference, and subject to the following two conditions:

This device complies with Part 15 of the FCC Rules. Operation is FCC STATEMENT CONGRATULATIONS ON YOUR PURCHASE OF THE SPASTUDIO HOLLYWOOD VANITY LIGHTED MIRROR. Please read all instructions and warnings prior to use. Keep this manual as it contains important information for future reference. SHARPER IMAGE NAME AND LOGOS (INCLUDING THE 77 LOGO) ARE TRADEMARKS OR REGISTERED TRADEMARKS. DISTRIBUTED BY AND 2022 MERCHSOURCE, LLC. IRVINE, CA 92618. ALL RIGHTS RESERVED. FOR CUSTOMER SUPPORT, PLEASE CALL 1-800-374-2744. MODEL NO.: 1016930 Printed in China. D. C. The Max tilt angle of the mirror is 20 degree. desired position. base and gently moving the bottom of the mirror forward or backward to the The tilt angle of the mirror can also be adjusted by placing one hand on the mirrors MIRROR To adjust the lighting, touch the fan button again to disengage nail mode and allow the other buttons to resume their normal functions. Hollywood Mirror. Be careful not to touch wet nail polish against the tray or the underside of the Mirrors fans will assist in drying nail polish. over the lower tray, with your fingertips under the mirror, where the Hollywood illuminate to indicate that nail mode is on. This is to allow you to rest your hands When Nail mode is engaged, the lighting controls will be locked and a lock icon will

(Figure D). on the bottom fans. The bottom fans will direct the air towards the mirrors tray To activate Nail Mode touch the fan button again to turn off the top fans and turn directed toward your face from each side of the mirror (Figure C). To turn on the upper fans, touch the fan button once. A cool stream of air will be The Hollywood Mirror has built-in fans to help cool and dry make up and nails. FANS SPASTUDIO HOLLYWOOD VANITY LIGHTED MIRROR WHAT YOU GET a. SpaStudio Hollywood Mirror b. AC adapter c. 10x magnetic mini mirror a. b. SAFETY WARNINGS PLEASE READ BEFORE USE Adult assembly required. Use this item only for its intended use. Do not expose to extreme temperatures. Throughly inspect products before every use. If the product appears worn, frayed/splintered, cracked, or broken in any manner, discontinue use and discard immediately. Careful when handling this product, it is made of glass and could break, chip or shatter if dropped. Do not submerge in water. DANGER To reduce the risk of electric shock, always unplug this appliance before cleaning. This product is meant for use only in conjunction with a suitable device. Please consult your device packaging to determine whether this product is compatible with your particular device. Manufacturer is not responsible for any damages to any device or personal property incurred through the use of this product. Manufacturer shall in no way be liable to you or any third party for any damages you or any third party may suffer as a result of use, intended or unintended, or misuse of this product in conjunction with any device or accessory other than the ompatible device for which this product is designed or intended. Manufacturer will not be responsible for any damages you or any third party may suffer as a result of misuse of this product as outlined above. Samsung and Galaxy S are both registered trademarks of Samsung Electronics Co., Ltd. Apple and iPhone are trademarks of Apple Inc. Qi is a trademark of the Wireless Power Consortium. c. GETTING STARTED QI CHARGING TIPS POWER 1. Locate the USB-C inputs on the Hollywood Mirror located on the rear base of the mirror. 2. Insert the USB-C side of the adapter into the right port (Figure A). Note: This adapter is designed specifically for the Hollywood Mirror. Do not attempt to power with any other adapter. Do not attempt to power or charge any other device with this adapter. Failure to heed these instructions could result in damage to the Hollywood Mirror or your other personal devices. 3. Plug the AC adapter into an 110V AC household outlet. 4. Now your Hollywood Mirror is ready for use. The Hollywood Mirror can also provide pass-through charging to another device. Devices to be powered by the mirror must be plugged into the left USB-C output port next to the power port. The Hollywood Mirror will provide 5V/1A power output. The Hollywood Mirror also provides Qi charging for your compatible phone. Place your phone on the silver ledge at the bottom of the mirror so that it covers the 77 logo. Qi charging will begin automatically and a white LED underneath the mirror will indicate that Qi charging is engaged. You can charge your phone vertically or horizontally (Figure B). A. B. Output USB-C Port Input USB-C Port COMPATIBLE WITH Apple iPhone 8 and newer and select Android smartphones. Qi wireless technology enabled devices. Be sure to remove and phone accessories to use Qi charging. A non-metal phone case up to 3mm thick can be used. HOW TO USE Light Power Light Intensity

(From Low to High) Fan Light Color

(From Cool to Warm) LIGHT To turn the mirrors lights on, gently touch the leftmost dot of the lighting control panel. The lights will turn on in low setting. To increase light intensity, simply touch or slide your finger along the lighting control bar to adjust between the Hollywood Mirrors 5 lighting intensity levels. To adjust the lighting color, touch the color button. Repeated presses will toggle through the 3 builtin lighting color temperatures for optimal makeup application at any setting. Mix and match color settings to create the perfect light setting for you. To turn the mirror's light off, gently touch and hold the leftmost dot of the lighing control panel. SPOT MIRROR To use the included 10x magnification spot mirror, attach it anywhere on the face of the Hollywood Mirror. You can also store it on the back of the mirror. To store on the back, place it over the silk screened icon. The internal magnet will hold it in place, and the sticky silicon pad will assist as well. If the sticky silicone pad becomes dirty, wipe it clean with water and allow to air dry.

IOWW) HaduuMS SHARPER IMAGE 2022 MerchSource LLC. Irvine, CA. Input: 15V- 3A Output: LOW Max FCC ID: 2AEVM1016930 Mode! #:

is device complies with part 15 of the FCC 1) This device may not cause harmful including SHARPER IMAGE 2022 MerchSource LLC. Irvine, CA. Input: 15V= 3A Output: LOW Max FCC ID: 2AEVM1016930 Model #1016930 26680423213 Made in China This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(2) This device may not cause harmfulinterference, and (2) This device must accept any interference received, including interference that may Cause undesired operation, q

(MERCHSOURCE, LLC) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 07-27-2023 FCC ID: 2AEVM1016930 Ref. #1: Attestation Statements Part 2.911(d)(5)(i) Filing MERCHSOURCE, LLC (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Ref. #2: Attestation Statements Part 2.911(d)(5)(ii) Filing MERCHSOURCE, LLC (the applicant) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered List as an entity producing covered equipment. Cover List Link: (https://www.fcc.gov/supplychain/coveredlist) Applicant: MERCHSOURCE, LLC Address: 7755 Irvine Center Drive, Suite 100, Irvine, CA 92618 Contact Person: Shirley Luo Tel.: 9499006598 Email: Shirley Luo <shirley.luo@merchsource.com>

Sincerely, Rev 2/6/2023

MERCHSOURCE, LLC Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA FCC ID: 2AEVM1016930 Date of Filing to TCB: 07-26-2023 Ref: Attestation Statements Part 2.911(d)(7) Filing

[MERCHSOURCE, LLC] (the applicant) certifies that, as of the date of the filing of the application,

[MERCHSOURCE, LLC] is our designated U.S. agent for service of process for the above referenced FCC ID. [MERCHSOURCE, LLC] accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment and will notify the TCB/FCC in a timely manner if the US Processing Agent changes.

[MERCHSOURCE, LLC] accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information:

Name: MERCHSOURCE, LLC FRN: 0024624587 Address: 7755 Irvine Center Drive, Suite 100, Irvine, CA 92618 Contact Person: Shirley Luo Tel.: 9499006598 Email: Shirley Luo <shirley.luo@merchsource.com>

Sincerely,

(Applicant printed name)

(Applicant signature)

(US Local Agent printed name)

(US Local Agent signature) Shirley Luo Shirley Luo Rev 2

775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: certification@bureauveritas.com Website: https://www.cps.bureauveritas.com/

Confidentiality Request Letter Reason for Amendment (current / obsolete) Initial Release (obsolete) Adding CFR 2.459 (obsolete) Updated company template & Added text box

(obsolete) Added IC confidentiality letter form (obsolete) Corrections to STC form. Added reference to KDB

(obsolete) Updated company logo (current) Updated References and Contact Info Revision History From 1.0 1.0 2.0 3.0 4.0 5.0 6.0 To 1.0 2.0 3.0 4.0 5.0 6.0 7.0 Approved Date Nov-14-2006 August 11 - 2008 Jan-31-2012 March-26-2015 Nov-19-2015 Jun-26-2019 Aug-30-2020 SCS-F019: Confidentiality Request Letter Page 1 of 2 Rev 7.0 MerchSource, LLC 2023.7.28 To:

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046-1609 Cc:

Bureau Veritas Consumer Products Services Inc. 775 Montague Expressway Milpitas, CA 95035 Subject: Confidentiality Request for FCC ID: 2AEVM1016930 Pursuant to CFR 47 sections 0.457 and 0.459, we respectfully request permanent confidential treatment of the following Exhibits accompanying this application be held confidential:

Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent Permanent i Permanent Permanent Permanent Permanent Permanent i Exhibit Block Diagram External Photos Internal Photos Operational Description/ Theory of Operation Parts List Tune-Up Procedure Schematics Test Setup Photos Users Manual The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

To avoid premature release of sensitive information prior to marketing or release of the product to the public, the applicant requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 45 or 180 days; or for a specified date of not to exceed 180 days from the Grant Date The applicant understands that disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Clients signature Clients name: Shirley Luo Title : Senior Compliance Manager Contact information / address : 7755 Irvine Center Drive, Suite 100, Irvine, CA 92618 Permanent confidentiality may be requested in accordance with FCC KDB 726920 SCS-F019: Confidentiality Request Letter Page 2 of 2 Rev 7.0

MERCHSOURCE, LLC Declaration of Identical Product Hereby, Name of manufacturer: MERCHSOURCE, LLC Address:

City:

Country:

declares that:

Product description:

Type designation(s):

Trademark:

Family name No.33 Middle Industry AV,XiaoLan Town,Zhongshan City,GD,China Zhongshan China Vanity Mirror Hollywood LED 11.8x17.8inch 1017452, 101XXXX (where XXX can be digits 0000-9999 which represent different customers) Sharper Image is technically identical to:

Product description:

Vanity Mirror Hollywood LED 11.8x17.8inch Type designation:

1016930 Trademark:

Certificate number

(if applicable) Sharper Image They are identical with the test model 1016930 except the model number for trading purpose. Date:

City:

Name:

Signature 2023.8.3 Zhongshan Shirley Luo

MerchSource, LLC. Date: 2023.7.28 To: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD FCC ID: 2AEVM1016930 To Whom It May Concern:

This letter is to ascertain that MerchSource, LLC. Product Wireless Charger with Vanity Mirror Hollywood LED 11.8x17.8inch 2AEVM1014289, has been the units used for conducting FCC compliance testing, and it meets KDB 680106 D01 v03r01, Clause 5(b) all 6 conditions as stated below hence PAG is not required. 1 Power transfer frequency is less that 1 MHz Yes 2 Output power from each primary coil is less than or equal to 15 watts Yes 3 The system may consist of more than one source primary coils, charging one or more clients. If more than one primary coil is present, the coil pairs may be powered on at the same time. Can only be launched at the same time, the two coils are crossed and stacked together, in fact, there is only one Chain, the function is to charge faster 4 Client device is placed directly in contact with the transmitter. Yes 5 Mobile exposure conditions only (portable exposure conditions are not covered by this exclusion). Yes 6 The aggregate H-field strengths anywhere at or beyond 15 cm surrounding the device, and 20 cm away from the surface from all coils that by design can simultaneously transmit, and while those coils are simultaneously energized, are demonstrated to be less than 50% of the applicable MPE limit. Yesrefer to exposure report If you have any question or concerns, pls. contact us. Sincerely, Clients signature Name: Shirley Luo Address 7755 Irvine Center Drive, Suite 100, Irvine, CA 92618