FCC ID: LU9569398RX L.O.L. Surprise R/C Wheels

BATTERY SAFETY INFORMATION Use only size AA (LR6) alkaline batteries (2 required) and AAA (LR03) alkaline batteries (2 required). Charging of rechargeable batteries should only be done under adult supervision. Remove rechargeable batteries from the product before recharging. Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries. Be sure to insert the batteries correctly and follow the toy and battery manufacturers instruction. Always remove exhausted or dead batteries from the product. Dispose of dead batteries properly: do not burn or bury them. Do not attempt to recharge non-rechargeable batteries. Avoid short-circuiting battery terminals. Remove batteries before placing the unit into storage for a prolonged period of time. FCC & IC COMPLIANCE NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Modications not authorized by the manufacturer may void users authority to operate this device. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. Lets care for the environment!

The wheelie bin symbol indicates that the product must not be disposed of with other household waste. Please use designated collection points or recycling facilities when disposing of the item. Do not treat old batteries as household waste. Take them to a designated recycling facility. Please keep this manual as it contains important information. WWW.LOLSURPRISE.COM 2020 MGA Entertainment, Inc. L.O.L. SURPRISE! is a trademark of MGA in the U.S. and other countries. All logos, names, characters, likenesses, images, slogans, and packaging appearance are the property of MGA. Printed in China 0520-1-E/INT MGA Entertainment, Inc. 9220 Winnetka Ave. Chatsworth, CA 91311 U.S.A.

(800) 222-4685 MGA Entertainment (Netherlands) B.V. Baronie 68-70, 2404XG Alphen a/d Rijn, The Netherlands Tel: +31 (0) 172 758 038 E-mail: klantenservice@mgae.com MGA Entertainment UK Ltd. 50 Presley Way, Crownhill, Milton Keynes, MK8 0ES, Bucks, UK 0800 521 558 Imported by MGA Entertainment Australia Pty Ltd Suite 2.02, 32 Delhi Road Macquarie Park NSW 2113 1300 059 676 4 SKU: 569398 AGES 3+ YEARS ADULT SUPERVISION &

BATTERY INSTALLATION REQUIRED CONTENTS A. B. C. 1 RC Wheels Vehicle 1 Remote Control 1 Limited Edition Downtown Doll D. E. F. G. 1 Pair of Shoes 1 Outt 1 Visor 1 Hair Brush H. I. J. 1 Pair of Glasses 1 Fanny Pack 1 Bottle K. L. M. 1 Accessory 1 Doll Stand 1 Sticker Sheet NOTE Turn the key locks under the platform to release the vehicle from packaging. Discard keylocks and all other packaging materials before giving to a child. M. G. C. E. L. D. F. K. J. I. B. H. A. A. M. Illustrations are for reference only. Styles may vary from actual contents. BATTERY INSTALLATION Before beginning, an adult must install fresh alkaline batteries in the vehicle and remote control. Heres how:

1. Using a Phillips screwdriver (not included), remove the screws and battery compartment covers located under the vehicle and on the back of the remote control. 2. Install two (2) fresh 1.5V AAA (LR03) alkaline batteries (not included) in the remote control, making sure the

(+) and (-) ends face the proper direction as indicated inside the battery compartment. 3. Install two (2) fresh 1.5V AA (LR6) alkaline batteries (not included) in the vehicle, making sure the (+) and (-) ends face the proper direction as indicated inside the battery compartment. 3. Replace the compartment covers and tighten the screws. VEHICLE REMOTE CONTROL 1 x AA Batteries in each compartment

. 1 5 V A A

L R 6 6 R L

A A V 5 1

. 2 x AAA Batteries 3 0 R L

A A A V 5 1

. 3 0 R L

A A A V 5 1

. 1 PAIRING VEHICLE AND REMOTE CONTROL Before driving, pair the vehicle and remote control. Heres how:

1. Move the switch under the vehicle from the OFF (O) position to the ON ( I ) position. (Fig. 1) 2. Move the switch on top of the remote control from the OFF (O) position to the ON ( I ) position. (Fig. 2) 3. The vehicle and remote control are paired when the vehicles front wheels turn as you turn the remote. 4. The vehicle and remote control must be re-paired after turning the switches o and on again. Fig. 1 I

(ON) O

(OFF) ADJUSTING THE ALIGNMENT If the vehicle is driving to one side while the remote is straight, adjust the alignment by moving the switch under the vehicle to the left or right. DOLL STAND ASSEMBLY DOLL FEATURE Place the vehicle on a hard, at surface in a large, open area and follow the steps below to drive the vehicle. DRIVING LESSONS O I O I 1 3 Fig. 2 2 4 Press and hold the right button to drive the vehicle forward. Press and hold the left button to drive the vehicle in reverse. Lift the wheel from the left side. While keeping the wheel in position, press and hold the left or right button. The vehicle will go forward or reverse to the left. Lift the wheel from the right side. While keeping the wheel in position, press and hold the left or right button. The vehicle will go forward or reverse to the right. 2 DOLL AND COLOR CHANGE INFORMATION Before beginning, cover the play area to protect from possible water damage. Color change will start at approximately 59F (15C), but best results occur if the ice water is chilled to approximately 32F (0C) or colder. Color change will only work on certain parts of the dolls body. If color change does not work properly or quickly, the temperature of the dolls body may be too close to the temperature of the water. Color change temperatures may vary according to weather conditions. The color-change effect has a lengthy, but limited lifespan. An adult must be present when children are playing with water. Do not store the doll in direct sunlight for extended periods of time. Do not get the dolls hair wet. Do not submerge dolls hair in water. If hair gets wet, air dry only. Do not subject dolls hair to heat. CAR INFORMATION Do not play with vehicle in the street, where there is vehicular traffic, or in heavily traveled ares with pedestrians. Do not stand on, sit or throw the vehicle or remote control, as doing so can result in injury to the person and irreparable damage to the units. Do not run the vehicle into furniture, walls, pets, people, etc., as doing so may cause injury to the person and irreparable damage to the unit. Only one doll fits in the vehicle and should be wearing the included shoes for best fit. Avoid driving the vehicle through water, mud, etc. Keep long hair and loose apparel, such as shoestrings, away from the rotating wheels. It is recommended to drive the vehicle on hardwood ooring. Keep the remote control in range to operate vehicle correctly. If the vehicle stops working or doesnt work as it should, turn o remote and vehicle and pair again. If there is still a problem, replace the batteries. When not playing, turn the vehicle and remote control o to conserve battery power. Only apply stickers to the vehicle, as adhesive may not be fully removed from other surfaces. Wipe the unit with a damp cloth to clean. To shine the nish on the vehicle, use a dry microber cloth. Keep moisture away from the battery compartment. Frequency band range is 2.420 - 2.462 GHz. Maximum radio-frequency power (for EU compliance) of the Remote control is -9.70dBm, for Vehicle is -22.86dBm. Maximum controlling distance: Approximately 100 ft. (30m). 3

|_ This device complies with Part 15 of the FCC Rules. Operation &

is subject to the following two conditions:(1) This device may 569398 S any interference received, including interference that may cause |C- 4504A-569398RX not cause harmful interference, and(2) this device must accept FCC |D: LU9569398RX SS . undesired operation. 569398RX ce 2020 MGA Entertainment, Inc Y Made in China G MGA Entertainment (Netherlands) B.V. _\_ Baronie 68-70, 2404XG Alphen a/d Rijn,

= Ine Netherlands ao

To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: MGA Enterfainment (HK} Ltd. Suite 301, 3/F, Chinachem Golden Plaza, No.77 Mody Road, Tsim Sha Tsui East Kowloon Hong Kong Regarding: Confidentiality Request regarding application for FCC [D: LU9569398RX LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission's rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 (or 0 or 90 or 45) days from the grant date, whichever is less. If the device is marketed within aforementioned days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. External Phatos internal Photos Test Setup Photos User manual(s) Sincerely, Print Name: iN Chung Title: QA Director Signature: NU I On behalf of Company: MGA Entertainment (HK) Ltd. Telephone: 852-2732-9200 ext.29200 E-mail: jullan.chung@mgae.com

SGS North America inc. i i S08 NervAercaiine., Applicant Declaration SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name MGA Entertainment (HK) Ltd. Aaareee Suite 301, 3/F, Chinachem Golden Plaza, No.77 Mody Road, Tsim Sha Tsui East Kowloon Hong Kong Grantee Cade LU9 FCC ID LU9644039RX Authorized Contact Name Julian Chung Contact Email julian.chung@mgae.com Contact Phone 852-2732-9200 ext.29200 7 I, the undersigned, certify that | am an authorized signatory for the Applicant and therefore declare;

a) b) 9) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:

(1) labeling the equipment with the exact FCC ID as specified in this application,

(2) compliance statement labeling pursuant to the applicable rules,

(3) compliance of the equipment with the applicable technical rules, if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure ihat production units of this equipment will continue to comply with the FCCs technical requirements. in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. in accordance with 1S017065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.

(1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing.

(2) the Applicant shaif make provisions to always have a production sampie available upon request by SGS, FCC and/or ISED.

(3) the Applicant shaf/, upon request by SGS, at the Applicant's expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a party for these purposes. the Applicant has read, understood, accepts and agrees io abide by the SGS North America, inc. (TCB) terms and conditions. Link to CFRs: hittps:/Awww. fcc. gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/mules-requiations-title-47 Link to KDBs: https.//apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: hitps:/Avww.ic.gc.ca/eic/site/smt-ast.nsffena/sf01130.html Applicant Signature: ji Date: 2020/5/7

[As Print Name:

Julian Chung Title:

QA Director NOTE: This declaration cannot be signed by an Agent, it shal! be signed by an authorized person listed in the FCC database Applicant Declaration Rev:0.0

Date: 2020/4/15 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: LU9569398RX To whom it may concern:

We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch and Joyce Shi in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, | acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with MGA Entertainment (HK) Ltd. This authorization is valid until further written notice from the applicant. Print Name: Julian Chung Title: QA Director Signature: / J be On behalf of Company: MGA Entertainment (HK) Ltd. Telephone: 852-2732-9200 ext.29200 E-mail: jullan.chung@mgae.com