Miele@home Manual for EI8800-A and EI7800 USA/CDN Market Version 1.2 Manual for EI 7800/EI8800-A USA/CDN EI8800-A EI7800 Version: 1.2 Date: 29/09/2014 Revision History Date Version Description Author Department 09.09.2014 1.0 Draft Initial manual for FCC/IC 23.09.2014 1.1 Final manual F. Laube F. Laube GTE/SKT GTE/SKT 29.09.2014 1.2 IC Statement in France Technical data update Added RF Parameter Power Radiated Test Report 6-0196-12-
1-2b Clause 5.5 F. Laube GTE/SKT Date Version Reviewed By Name 09.09.2014 1.0 Draft G. Borgelt 23.09.2014 29.09.2014 1.1 1.2 G. Borgelt G. Borgelt Department GTE/TL GTE/TL GTE/TL Date Version Approvals Name Department Manual_EI7800_EI8800-
A_USA_CDN_1.2.docx 2014 Miele&Cie. KG Page 2 of 8 Version: 1.2 Date: 29/09/2014 Manual for EI 7800/EI8800-A USA/CDN EI8800-A EI7800 Contents 1. General 2. Technical data 3. Norms / Standards 3.1 FCC / IC 3.2 Safety 3.3 RF-Standard 3.4 Photos and Labels 4. Regulatory Notice 4.1 United States (FCC Notice) 4.2 Canada (IC Notice) 4 4 5 5 5 5 5 7 7 8 Manual_EI7800_EI8800-
A_USA_CDN_1.2.docx 2014 Miele&Cie. KG Page 3 of 8 Manual for EI 7800/EI8800-A USA/CDN EI8800-A EI7800 1. General Version: 1.2 Date: 29/09/2014 The EI7800 and EI8800-A are wireless network interface modules for Miele home appliances like hoods, hobs, cooling devices or washing machines. The modules are supporting the IEEE 802.15.4 ZigBee protocol. The EI8800-A is a module for build in appliances during manufacturing. The EI7800 is a wireless stick which is connected to the appliance by the customer or customer service. Both modules depend on the same wireless design with a single chip transceiver. The EI7800 has additional components for power supply and UART driver. 2. Technical data VCC in V EI8800-A EI7800 Max. Current in mA EI8800-A EI7800 Current in A ambient temperature inC EI8800-A EI7800 Humidity max Dimensions in mm EI8800-A EI7800 Wire (EI8800) wireless MCU/RF IC Antenna type Crystal Input Clock in MHz Frequency Channels Channel Frequencys Bandwidth Transmission Power in mW 3,3 5,0 50 0.06 0 85 0 - 50 93%
non condensation 30/27 82,5/40,0/23,5 325 CC2530 PCB inverted F 32 2.4 GHz 11 - 26 2,405 GHz 2,480 GHz (5MHz distance) 2,83 MHz
<8 Manual_EI7800_EI8800-
A_USA_CDN_1.2.docx 2014 Miele&Cie. KG Page 4 of 8 5V to 3,3V Voltage Regulator5V to 3,3V Uart DriverSingleChipZigBee-TransceiverPCB-Antenna with antenna-NetworkHome appliance InterfaceEI 7800SingleChipZigBee-TransceiverPCB-Antenna with antenna-NetworkHome appliance Interface3,3V VCCEI 8800 Manual for EI 7800/EI8800-A USA/CDN EI8800-A EI7800 Version: 1.2 Date: 29/09/2014 3. Norms / Standards 3.1 FCC / IC FCC Regulation Part 15.109, Part 15.209 and Part 15.247 IC regulations RSS-Gen Issue 3 and RSS-210 Issue 8 3.2 Safety UL 60730-1A, CAN/CSA E60730-1:02+A1:2007 CSA Certificate 70009686 3.3 RF-Standard The modules use the RF standard IEEE 802.15.4. 3.4 Photos and Labels EI7800 product EI7800 Internal EI7800 Label side view Manual_EI7800_EI8800-
A_USA_CDN_1.2.docx 2014 Miele&Cie. KG Page 5 of 8 Manual for EI 7800/EI8800-A USA/CDN EI8800-A EI7800 Version: 1.2 Date: 29/09/2014 EI8800-A Top View EI8800-A integrated in home appliance steering device Manual_EI7800_EI8800-
A_USA_CDN_1.2.docx 2014 Miele&Cie. KG Page 6 of 8 Manual for EI 7800/EI8800-A USA/CDN EI8800-A EI7800 Version: 1.2 Date: 29/09/2014 4. Regulatory Notice 4.1 United States (FCC Notice) FCC ID: 2ACUWEI7800 FCC ID: 2ACUWEI8800 In accordance with FCC Part 15, the 2ACUWEI8800 is listed as a Modular Transmitter Device. FCC CAUTION:
Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of FCC Rules. Operation is Subject to following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received including interference that cause undesired operation. FCC STATEMENT:
This equipment has been tested and found to comply within the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a different circuit from that to which the receiver is connected Consult the dealer or an experienced radio/TV technician for help. USERS MANUAL OF THE END PRODUCT:
The end user has to be informed that any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. If the size of the end product is smaller than 8x10cm, then additional FCC part 15.19 statement is required to be available in the users manual: This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. LABEL OF THE END PRODUCT (only for EI8800-A):
The final end product must be labeled in a visible area with the following " Contains FCC ID:
2ACUWEI8800 ". If the size of the end product is larger than 8x10cm, then the following FCC part 15.19 statement has to also be available on the label: This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. Manual_EI7800_EI8800-
A_USA_CDN_1.2.docx 2014 Miele&Cie. KG Page 7 of 8 Manual for EI 7800/EI8800-A USA/CDN EI8800-A EI7800 Version: 1.2 Date: 29/09/2014 4.2 Canada (IC Notice) IC: 5669C-EI7800 IC: 5669C-EI8800 The term IC before the radio certification number only signifies that Industry Canada technical specifications were met. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. LABEL OF THE END PRODUCT (only EI8800-A):
The final end product must be labeled in a visible area with the following " Contains IC : 5669C-
EI8800". This device complies with Part 15 of the FCC Rules and with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Manual_EI7800_EI8800-
A_USA_CDN_1.2.docx 2014 Miele&Cie. KG Page 8 of 8