OVERVIEW Materials in Box:
Authorization Card Enterprise Tablet Pro Base Access Card (x5) Screws
(x4) Power Supply 4 VHB Strips
(Preinstalled) Mounting Plate Hex Wrench Base Plate Removal Alcohol Wipes
(x10) NOTE: The unit will slide to the right as the Security Wrench is turned. 1 ENTERPRISE TABLET INSTALLATION GUIDE MTI P/N 063-1407-00 rev C 2013 MTI All Rights ReservedMTI1050 NW 229th Avenue Hillsboro, OR 97124 T:800.426.6844 www.mobiletechinc.com Enterprise Tablet Pro Enterprise Tablet Lite NOTE: The unit will slide to the left as the Security Wrench is turned. 2 INSTALLATION GUIDEENTERPRISE TABLET INSTALLATION GUIDE123Configuration A: Top Mounted1324Configuration B: Wall Mounted MTI P/N 063-1407-00 rev C 2013 MTI All Rights ReservedMTI1050 NW 229th Avenue Hillsboro, OR 97124 T:800.426.6844 www.mobiletechinc.com 3 13Case DockedCase Ready For RemovalCase RemovedDetecting Card24Remove Case from BaseLED IndicatorsCASE REMOVAL AND LED GUIDEENTERPRISE TABLET INSTALLATION GUIDE MTI P/N 063-1407-00 rev C 2013 MTI All Rights ReservedMTI1050 NW 229th Avenue Hillsboro, OR 97124 T:800.426.6844 www.mobiletechinc.com Authorization Card If the case is docked:
If the case is removed:
Access Card If no Access Card is detected, the Base will return to normal condition waiting for registered Access Card to unlock the Base. The Base can register a maximum of 5 Access cards. The process will need to be repeated for each card. If a sixth card is registered, the first registered card will be deregistered. IF AUTHORIZATION CARD IS LOST OR STOLEN, CONTACT CUSTOMER SERVICE FOR REPLACEMENT. 4 ENTERPRISE TABLET INSTALLATION GUIDE1243ACCESS CARD REGISTRATION MTI P/N 063-1407-00 rev C 2013 MTI All Rights ReservedMTI1050 NW 229th Avenue Hillsboro, OR 97124 T:800.426.6844 www.mobiletechinc.com The base can register a maximum of 5 Access cards. Example:
ACCESS005 ACCESS004 ACCESS003 ACCESS002 ACCESS001 NOTE: The above grid is a conceptual visual representation of the Electronic Register. If a sixth card is registered, the first registered card will be deregistered. Example:
ACCESS006 ACCESS005 ACCESS004 ACCESS003 ACCESS002 If a card is lost or stolen:
Example:
Take any of the remaining access cards and register it 5 consecutive times:
Example:
ACCESS005 ACCESS004 ACCESS003 ACCESS002 ACCESS001 ACCESS001 ACCESS001 ACCESS001 ACCESS001 ACCESS001 Then re-register the remaining cards plus the new one ordered through Customer Service. Example:
ACCESS006 ACCESS005 ACCESS004 ACCESS002 ACCESS001 IF AUTHORIZATION CARD IS LOST OR STOLEN, CONTACT CUSTOMER SERVICE FOR REPLACEMENT. 5 ENTERPRISE TABLET INSTALLATION GUIDE152643 MTI P/N 063-1407-00 rev C 2013 MTI All Rights ReservedMTI1050 NW 229th Avenue Hillsboro, OR 97124 T:800.426.6844 www.mobiletechinc.comACCESS CARD REGISTRATION FCC Information Federal Communication Commission interference statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. FCC Caution This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. this device may not cause harmful interference and 2. this device must accept any interference received, including interference that may cause undesired operation RF Exposure Warning The equipment complies with RF exposure limits set forth for an uncontrolled environment. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. 6 ENTERPRISE TABLET INSTALLATION GUIDE MTI P/N 063-1407-00 rev C 2013 MTI All Rights ReservedMTI1050 NW 229th Avenue Hillsboro, OR 97124 T:800.426.6844 www.mobiletechinc.com