Moblie Appearance picture ManufacturerMobiwire Manufacturer trademark:
ModelMobiwire NIKITI, Altice F2 1 Technical Specifications Weight: 78.7g (with battery) Size: 111.61*49.31*14.8mm Battery: 3.7Li-ion For the network: GSM850MHz/PCS1900MHz Battery refer to the following table:
Battery Type Li-battery Battery Capacity 1000mAh About 8hr Talk time Standby time About 300hr Operating Frequency Band (RF):
GSM850:824.0-849.0MHz(TX),869.0-894.0MHz(RX) PCS1900:1850.0-1910.0MHz(TX),1930.0-1990.0MHz(RX) Bluetooth:2402-2480MHz(TX/RX) FM:87.5MHz-108MHz Modulation mode:
GMSK GFSK//4-DQPSK/8-DPSK Max. Of Transmit power:
GSM850:PCL=5,PWR=32.50.5dBm PCS1900:PCL=0,PWR=29.50.5dBm Bluetooth:4dBm+/-1dBm The crystal the tranceiver use is 26MHz Operating temperature:-20~60 Charging temperature:Charging 0~55;Discharging:-20~60 Battery technical:Li-ion Low Voltage:3.6V Nominal Voltage:3.7V 2 High Voltage:4.2V Charge Restriction Voltage:4.20.03V Rated Capacity:1000mAh Battery low voltage:3.5V Operating Relativity Humidity Range:93%
charger modelA31-25132-5v550 manufacturerAohai Notice:
The actual condition for mobile phones using has the relation to the network of the local environmental conditions, SIM card and the way using. Warning:
For the consequences result by violating the following recommendations or using mobile phones In accurately, the manufacturers has no responsibility. Explain: If relate to the upgrades, without notice. The Company has the right for the final interpretation of this statement. 3 Table of Contents 2. Moblie Appearance picture ................................. 1 1. Quick start ............................. 9 Icon Explain .......................................................... 9 Install SIM card .................................................. 10 Install T-flash card .............................................. 10 Installing Battery ................................................ 10 Battery Charging ................................................. 10 Switching on ........................................................11 Call function ........................ 12 Dialing telephone ................................................ 12 Receiving telephone ............................................ 12 Call in the menu .................................................. 13 Menu functions .................... 14 Messaging ........................................................... 14 Call center ........................................................... 18 Phonebook .......................................................... 19 Camera ................................................................ 16 Multimedia ......................................................... 20 FM radio ............................................................. 22 Profiles ................................................................ 20 Extras ...................................... !
Bluetooth ............................................................ 25 File manager ....................................................... 26 Settings ............................................................... 26 3. 4 4. 5. 6. 7. Input methods ..................... 31 Phone maintenance ............. 33 Accessories ......................... 355 SAR .................................. 356 5 Foreword 1882 ODO mobile phones user, thank you for choosing our mobile phone!
Our cellular phones is according with the communication industry standards of PRC, and also according with the standards of European, and are approved for GSM networks. Your phone may be used internationally with various networks depending on your roaming arrangements with your service provider. To use this phone you must subscribe to a GSM service from a provider. We have included many features in this device but their function depends on the features available with your subscribed wireless network. Please contact your service provider for more information. We strongly recommend you carefully read and understand this manual before using your phone in order to keep it under best conditions for your effective usage and utmost satisfaction. Safety Never attempt to disassemble your phone. You alone are responsible for how you use your phone and any consequences of its use. As a general rule, always switch off your phone wherever the use of a phone is prohibited. Use of your phone is subject to safety measures designed to protect users and their environment. Do not use your phone in damp areas (bathroom, swimming pool). Protect it from liquids and other moisture. 6 Do not expose your phone to extreme temperatures lower than
-20C and higher than +60C. The physicochemical processes created by chargers impose temperature limits when charging the battery. Your phone automatically protects the batteries in extreme temperatures. Do not leave your phone within the reach of small children
(certain removable parts may be accidentally ingested). Electrical safety Only use the chargers listed in the manufacturers catalogue. Using any other charger may be dangerous; it would also invalidate your warranty. Line voltage must be exactly the one indicated on the chargers serial plate. Aircraft safety When traveling by plane, you will need to switch your phone off when so instructed by the cabin crew or the warning signs. Using a mobile phone may be dangerous to the operation of the aircraft and may disrupt the phone network. Its use is illegal and you could be prosecuted or banned from using cellular networks in the future if you do not abide by these regulations. Explosive materials Please comply with warning signs at petrol station when personnel asking you to switch your phone off. You will need to comply with radio equipment usage restrictions in places such as chemical plants, fuel depots and at any location where blasting operations are under way. Electronic equipment To avoid the risk of demagnetization, do not let electronic devices close to your phone for a long time. Electronic medical equipment Your phone is a radio transmitter which may interfere with electronic medical equipment or implants, such as hearing aids, pacemakers, insulin pumps, etc. It is recommended that a minimum separation of 15 cm be maintained between the 7 phone and an implant. Your doctor or the manufacturers of such equipment will be able to give you any advice you may need in this area. Hospitals Always make sure that your phone is switched off in hospitals when so instructed by warning signs or by medical staff. Road safety Do not use your phone when driving. In order to give your full attention to driving, stop and park safely before making a call. You must comply with any current legislation. Distance of operation This phone model has been tested and meets radiofrequency exposure guidelines when used As follows:
Against the ear: place or receive a phone call and hold the phone as you would a wire line telephone. Body worn: when transmitting, place the phone in a carry accessory that contains no metal and positions the phone a minimum of 2.5cm form your body. Use of other accessories may not ensure compliance with radiofrequency exposure guidelines. If you do not use a body worn accessory and are not holding the phone at the ear, position the phone a minimum of 2.5 cm from your body, Data operation: when using a data feature, position the phone a minimum of 2.5cm from your body for the whole duration of the data transmission 8 1. Quick start Icon Explain Icon Function description Network signal strength:
number of the more stronger the signal;
Battery capacity number of the more power the more full;
Messaging SIM have unread messages Missed call SIM have missed calls Used profiles Different icons show different icon: General, Silent, Meeting, Outdoor Headset Plug in headset Alarm Alarm function opened Key lock Show key and screen lock 9 Install SIM card This phone supports two SIM cards. Find SIM cards groove in the back of the phone and slide it completely there. During installation, please make sure the chip is facing downwards and pay attention to slot direction. Note 1. Keep SIM card out of childrens touch. 2. Any abrasion or folding could easily damage SIM card, so please be extremely careful when you insert, Remove and preserve it. 3. Please make sure that you have cut off the power supply and have taken out battery before you remove SIM card. Install T-flash card 1. First switch off the phone and remove the battery. 2. Push the metal card holder toward the bottom of the phone and lift the released end of the holder. 3. Place the memory card into the holder with the metal contacts face down and push the holder until it locks into place. Note:
1.To avoid damaging memory card, please do not plug memory card fast or frequently. 2. Please regularly backup information in the cards on other equipment when you use Cards like T-flash!
Improper use or other uncertain factors may cause the damage or loss to the content in the cards. Installing Battery Align the battery chip with the metallic salient point in battery jar, insert the battery until it is inserted into the battery jar. Slide battery cover into back of the phone until it is locked. Battery Charging Plug one end of the charger into the bottom of the phone, i.e., the charging plug into attachment mode and the other end into electrical outlet, Screen will display the charging sign. After 10 charging is finished, just pull out the plug. Switching on Long press the Red key to switch your phone on 1. If there is no SIM card, SIM card is defective, or SIM card contact is loose, you will be prompt with a warning after powering on, shut down and check your SIM and its installation. 2. If inserted SIM card only into the phone, meanwhile phone code and PIN code is turn on. When switched on, after entering the PIN code and phone code, the phone enter the standby mode by the current SIM. 3. If the phone detected authorized network, the screen will display network name and signal strength If there is no authorized network is found the phone can only make emergency calls or use non-communications features. 11 2. Call function Dialing telephone 1. Direct dial In standby mode, press the corresponding numeric keys to enter the phone number that you want to dial, including necessary area codes. Short Press the Right soft key [Clear] to delete one character, and Long Press delete all inputs, press the Green key to dial. 2.Dialing from Phonebook Enter the Phonebook via the menu, use the Up/Down Navigator keys to scroll to the desired contact, or press the first letter of the name of the desired contact as saved in your phonebook for quick access to names beginning with the letter then scroll to the desired, press the green key to dial. 3. Dialing from Call history Enter the Call center (press the Green key from standby or via the menu), use the Up/ Down navigator keys to scroll to the desired contact, press the green key to dial. 4. Dial emergency service You can directly dial the emergency service number without SIM card. Different networks use different urgency service numbers, so for details please inquire the network operation company. Receiving telephone When the phone will give is an corresponding alert, if your network supports caller ID, the screen will display callers name or number (depending on whether there is information of the caller in your phonebook). 1. Press the green key or press the Left soft key and confirm
[Answer] to answer the incoming call. 2. If function of [call center/call settings/Advanced setting/
Answer mode] is selected as [Any-key], press the any key to answer the incoming call except the Right soft key or the Red incoming call, there 12 key. 3. If you do not want to answer an incoming call, press the Red key or the Right soft key [Reject] to reject it. You can also press the Red key to end a call. 4. During a call, you can press the Up/Down navigator key to adjust receiver volume. Call in the menu During a call, press the right soft key can also open / close the handfree function. Press the left soft key into the options:
- Hold/Retrieve single call: The current call on hold or resume the call
- End single call: end off the current call.
- Phonebook: enter the phonebook list of interfaces.
- Call history: access to call history list.
- Messaging: access to the message menu.
- Mute/ Unmute: open / close the mute function.
-Volume: you can press the Up/Down navigator key to adjust the call volume. Note:
Denotes menu items only appear in specific circumstances. Such as: [Swap] exist only in the state of the phone and call the phone only appears to be suspended. At the same time for the conferencing, you need to the appropriate service provider to subscribe.. 13 3. Menu functions Messaging Message service is a network dependent function, which allows you to send, receive and edit all kinds of messages. Please contact the network operator for more details. Write message Edit a new message, save or send it to the recipient. Note:
To send a message, you need to set the correct message service center number which can be obtained from network provider. While editing, press the # key to change input method, a text message can be up to 960 characters in length. Press the OK Key, into add recipient interface, you can enter number and add from phonebook, you can add one number or more number, press the Left Soft key [Options] to select options when editing:
- Send to: Enter the destination number is sent, or press OK into the address book to find the necessary records, you can select the type of SIM card, confirmed, you can send
- Input method: You can select input method.
-Writing language: You can select input language.
- Advanced: You can select insert number.
- Save: Save the edited message to the Drafts. Note:
When the SIM card is not put in the SIM cards groove, the OK Key are same with the Left Soft key, which has options language, Advanced and save. Inbox Received SMS messages can be stored either in phone or in SIM memory, and are accessed here. When you have received a message, the tones or vibration to Input method, Writing including 14 alert you and message mark will also be shown on the screen. Press the Left soft key [View] or the OK key to read the new message, press the Right soft key [Cancel] to return, and you can also access the inbox to read the new message. If the message memory is full, the indication Memory full and the message icon will be shown on the screen and flashed. Before you can receive new messages, delete some of your old messages in the inbox folder. If the capacity of new messages is beyond the capacity of the inbox, the information will be lost and incomplete. In message list, press the left soft key or OK key to read the selected message, press the Left soft key to make the following menu:
-Reply: Reply to the message sender directly.
-Call Sender: Select to call the sender number
-Forward: forward the current message to other number.
-Delete: Delete the message.
-Advanced: you can use number of message to call or save. Not send messages will be stored in the mail within, the operation is the same with inbox
-Save to phonebook: Save the information in the sender number to the phonebook. Drafts Not send messages, will be stored in the mail within, the operation is the same with inbox Outbox Not send messages or sent successfully SMS, will be stored in the mail within, the operation is the same with inbox Sent messages If messages sent successfully, then be stored in the letter box. Automatically save messages need to select [SMS Settings Save sent message], other operation is the same with inbox SIM settings SIM setting: you can setting SIM parameter, including the 15 SMSC address, Delivery report, Reply path and Voicemail server. Delivery report: Open the function, after a successful send text messages, the system will return to report. Reply path: If the network allows, open the function, the recipient receives a text message, the system will send a confirmation message. Voicemail server: When you can not answer the phone, automatically incoming calls to voice mail number, you can let the other party to your message, a message stored in the network's voice mail system, and afterwards, you can access the voice mail system to listen to a message. Into the voice mail sub-menu, you can see the current voice message (up to the establishment of two voice mail) Voice mail function needs the support of network operator, you may need to subscribe to the service. For details, please contact with the operator. Memory status: Can view the memory storage status. Save sent message: Open the function, After the success of SMS will be automatically saved in the Outbox. Preferred storage: You can choose to give priority to messages stored in SIM card or mobile phone. Call center This phone can record all received, dialed and missed calls as well as their call time. Only when related function is supported by network and phone is switched on and in network service area, it can record the answered and missed calls. Call records may be accessed by pressing the Green key from standby or accessing through the menu. Access the Call Center menu using the normal menu path, the submenus are as follow:
Call history Press the up/down navigation key to view the call history 16 Once on the call records list, press the Green key to make a call;
press the OK key to view the details of current call record;
press the left soft key to make the following options:
- Call: call current record.
- Send text message: send SMS to the select number
- Save to phonebook: Store the number as a phonebook entry.
- Delete: Delete the current call record. Call timers:
View all time for the Last call time; Total received time; Total dialed time and all call time; and press the left soft key can reset all time. Call settings:
- Call waiting:
You can choose to Activate, Deactivate or Query status of this feature. Activate this feature, if you call any other incoming call, the phone beeps, and the screen will display the caller number or name and call waiting information.
- Call divert:
This feature allows you to play to your phone calls transferred to your voice mailbox or another phone number you specify. This function needs the support of network operator, please contact the network operator. Transfer in the following ways, each way can be set to enable, disable, and query status. When turned on, the on-screen prompts to transfer the phone number. Divert all voice calls: Transfer all voice calls to your settings in the phone number or voice mail Divert if unreachable: When your phone is off or not on the network service area, the transfer of all voice calls to your phone number or set voice mail Divert if no answer: No answer transfer all voice calls to your phone number or set voice mail Divert if busy: When the call is busy, the transfer of all voice 17 calls to your phone number or set voice mail Divert all data calls: Transfer all the data calls to the phone number you set, this function is supported by the network operator, please contact the network operator. Cancel all diverts: cancel all call forwarding type. Advanced settings:
- Answer mode:
Any key: Select the feature, all incoming calls, in addition to the red key and right soft keys, all keys can answer the call Auto answer when headset: Enable this feature, when the phone is in headset mode, there are about 2 seconds after the incoming call, the phone will automatically answer the call. Phonebook The Phone for your well-prepared high-capacity phone storage space. You can use the phone's contacts feature to save the contact name, number and caller ring-tone. The phone can save 200 phonebook records, SIM card number of records stored phone numbers vary because of their capacity. Add new contact
-To SIMNew records added to the SIM, each name can only be stored under a number.
-To Phone you can input name, number and set caller ring-tone. This Records stored in your phone. Quick search In order to facilitate you to quickly search the phone book to the desired number, the phone prompts you to quickly find features. In the contact list interface, you press # key to switch input method, enter the contact name of the first characters to locate search. After searching for the name, press the Green key to dial the number and press the Red key to end dialing. 18 Browse contacts In the phonebook list screen, press the up/down navigation key to select the contact record, press the green key to dial the number in the record, then the red key to end the dialing. Press the OK Key to display the details of the selected record. In the phonebook list screen, select either the phonebook record, press the left soft key to perform the following operation:
- View: view the select
- Send text message: send SMS to the select number
- Call: call the select number
- Edit: you can edit the select record
- Delete: Delete the select record
- Copy: this record can copy to SIM or phone
- Mark several: you can mark one or several contacts to delete.
- Phonebook settings:
Memory Status: Query "SIM", "phone" memory address book using status Camera and Video recorder Your phone is fitted with camera allows you to take photos whenever possible. You can store the pictures in phone or customize the wallpaper. Enter the camera app to get into the camera preview screen, press the OK key to take photo, press the right soft key to return, press the left soft key to option:
Switch to video recorder: select the function can directly switch to video preview screen. Photos: select the function into image viewer. Camera settings: Press the OK key to adjust the following options, including Anti-flicker and Delay timer, Profile that is complete, press the left soft key or the OK key to confirm the current setting. Scene mode: can set the photo mode as auto or night. White balance: can set white balance 19 Image settings: can set the image quality and image size. Storage: Can choose phone or memory card as the storage location Restore default: select the function and confirmed, the camera parameters can be restored to the default location After taking pictures, press the back button to return camera preview screen, press the left soft key to enter options, can take pictures to send or delete Entering the camera,press the left soft key into options menu:
Switch to video recorder: select the function can directly switch to camera preview screen. Camcorder settings: Press the OK key to adjust the following options;
Video settings: Can set the Anti-flicker and the video quality. Storage: Can choose camera phone or memory card as the storage location. Press the OK key to start recorder, recording, press the OK key to pause or resume recording; Press the right soft key to stop recording, the screen will be auto save video and auto back to the video preview screen. Multimedia Image viewer This feature is convenient for users to view the photos stored in albums, press the OK key to open the picture, press the left soft key to open the option menu:
View: open the current image to view. SendPictures can be selected through "Bluetooth" method to send. Use as: you can select the image use as wallpaper. Rename: Change the name of the selected picture. 20 DeleteDelete the select image. StorageCan choose phone or memory card as the storage location Image information: can display the current image information. Note:
When no pictures in Image viewer, the options menu only displays the browse style and storage. Video player This feature can be played stored in the mobile or U disk, supported formats to 3gp, mp4, avi file player. In the multimedia menu, select the video player into the video list, press left soft key open the option menu:
PlayPlay the current video file Send: can be selected video through "Bluetooth" method to send. RenameChange the name of the selected video. DeleteDelete the select video. StorageCan choose phone or memory card as the storage location Audio player Play the audio files saved in the phone or memory card. In playing interface, press the OK key to start or pause playing;
press the left/right navigation key to switch previous/next song;
press the */# key to adjust the volume, In playing interface, press the red key or the right soft key to exit player interface, Phone into the background playing mode, while the idle screen shows the name of the music. Press the left soft key into the play list, play the left soft key into option menu:
Playplay the current song. Refresh list: can refresh the play list. Settings Pre. Playlist: Press the left/right navigation key to switch 21 phone or memory card. List auto gen.: Select this option enabled, each time the player list will automatically update. Repeat: You can choose play mode repeat all, repeat one or off. Shuffle: When you select on, the player will not play in order by list. Background play: Select ON when playing the exit music player can continue playing. Sound recorder Enter the recording screen, press the left key into options menu:
New record: when you choose the function, start new record, In recording, press the left soft key to pause/ continue record, press the right soft key to stop record, the screen will be prompted to save video;
Play: can play the current recording. List: Display recorder files list Enter list interface,press the left key into options menu:
Play: can play the current recording. Rename: Change the name of the current recorder file. Delete: Delete the current recording. Use as: You can set the current recorder as coming call ring-tone. Send: Can be current recorder through Bluetooth method to send. Settings: you can set storage location and audio quality. FM radio FM radio is supported by the phone. In FM radio interface, press the OK key to open/close FM. You can use the manual to search for the channel, press the up/down navigation key to move forward /backward 0.1MHZand press the left/right navigation key to move to the last/next channel. Press the */# key to adjust play volume. Press the right soft key or red key to exit FM radio, and FM plays in the background. 22 in different Press the left soft key to the option menu:
Channel listDisplay channel list Manual inputManual enter frequency to identify, Radio interface automatically skip to the frequency to listen. Auto searchCan auto search channel and save channel Note: Quality of radio subscription is possible influenced by environment like indoor or under shield. You can improve this situation as following: stand closer to the window, adjust the position of earphone line or adjust the channel manually. Profiles The phone provides you with three profiles: General, Silent, Outdoor. Its help you according to the different events and environments according to different location, choose a different profile, then you only need to personalize your profile and activate. Note: The factory setting various modes set has been done and has been the general pattern of the default start Activate: Start the selected profile. Customize: You can set all kinds of effects to your own needs. In the Settings screen, press the down navigation key to move the highlight to the item needs to be set. Alter type:
Press the OK key to select Ring only Vib onlyVib and ring or Vib then ring Ring type: Press the OK key to select: Repeat or Beep once Ringtone: There are five built-in ring tones to choose for you, and you may also to choose your favorite audio file as your ring-tone from file management. Ring-tone volume: Press the up/down navigation key to adjust the ring-tone volume. Message: There are five built-in ring tones to choose for you. tones. custom ring 23 Message volume: Press the up/down navigation key to adjust the ring-tone volume. Keypad: Press the Up/Down navigation key to select click, or tone. Key-tone volume: Press the up/down navigation key to adjust the key-tone volume. Reset: restore the default settings Extras Calculator Into the calculator, the calculator interface:
Press 0 - 9 numeric keys to enter the number to be calculated, Press the navigation key to select the location on the screen corresponding to add, subtract, multiply and divide symbols for computing Press the # key for a decimal point. Press the left soft key to clear the last bit can be input or the result Press the OK button to display the results. Calendar Choose to enter the calendar, the screen will display the system date on the calendar month, and have a background box marked the current date. Press the navigation key to select the date, calendar information on the screen will be updated accordingly. Select any date, press the left soft key to enter options to the following:
Jump to date: Jump the selected date. Go to today: the date of the input query calendar information. Alarm You can use the phone as alarm clock, this feature allows you to set time arrives, make the phone ring to remind issue. When the alarm is turned on state, the alarm symbol is displayed in the top of the screen. When the alarm clock for reminders, press the left soft key to 24 terminate the alarm reminder, press the right soft key is the alarm clock to sleep. World clock In this menu, press the left / right navigation key to view some cities in the world relative to the current time the phone correspond to time. Torch Into the flashlight interface, select on, torch light; select off, torch dark. On the idle screen, long press the [ok] key, Torch on or off quickly. Bluetooth The phone supports Bluetooth, users can turn the feature on according to demand. Bluetooth technology can connect electronic devices wirelessly. Because Bluetooth communicate by radio, so in your phone and another Bluetooth device do not need to in the opposite direction, please maintain the maximum distance that between two devices is not more than 10 meters during communicating. In some countries or regions may be developed within a number of provisions restricting the use of Bluetooth devices, please contact your local authorities. Power: Press the OK key or the left soft key to open or close the Bluetooth function. If close some function, then you will end all the Bluetooth connection. Bluetooth connection will consume battery power, reducing cell phone operation time, when using the phone to perform other operations, please consider this factor. Visibility: Press the OK key or the left soft key to switch on or off, if you select on, other Bluetooth devices can find the phone;
if you select off, other Bluetooth devices cant find the phone. My device: Select to add new equipment, search for Bluetooth devices within range of the signal. After the Bluetooth device is found, you can select the matching connections. 25 Search audio device: Search within signal range of Bluetooth hands-free devices, such as Bluetooth headsets. My name: Display the Bluetooth device name of the machine can access to vies and edit. Advanced:
Audio path: set the audio path, is leave in phone or forward to Bluetooth headsets. Storage: set storage location in phone or memory card. My address: Display the Bluetooth device address. File manager In document management, you can open files in the Phone or SD card, you can select file or folder to press the left soft key into [Options], you can do the following(Perform different file operations are also different, depending on the specific operation by the file):
- Open: open the file or folder.
- New Folder: the folder in the selected directory New Folder.
- Rename: you can rename the select folder.
- Delete: delete the selected file or folder.
- Send: the select file can send by Bluetooth.
- use as: if the selected file is audio files, can set the file use as SIM incoming call; if the selected file is image file, can set the file use as wallpaper, Power on display or Power off display.
- Copy: you can copy the select file to other folders.
- Move: you can move the select file to other folders.
- Details: you can view the select file information. Note:
Memory card as the default save path, order to facilitate the use of multimedia features. Settings Phone settings:
26 LCD backlight Under this function can be press the left or right navigation key to adjust the brightness and LCD backlight time. Time and date Set home city: You can choose a phone provided in the city as the current time zone of your location Set time/date: Under this you can set the phone to the current date and time. The phone allows you to set the date range of calendar 2000 to 2030. Set format: Under this you can set the time and date display format Language Under this you can choose the language provided by the phone. Shortcuts Select this option to enter the functions directly that you often want to use. Scroll to a listed function and press the OK key or the Left soft key to select [Add], scroll to a desired function from the list of available functions, then use the Left/Right navigator keys to select 1-10 order and press the OK key to add. You can also select [Edit, Delete, Delete all, Change order]
options to set the function. Display Wallpaper: The standby interface is used to set the background wallpaper. You can choose from the built-in wallpaper can also be selected from File Manager image file. Screen auto lock:
Under this you can set the time to open or close the keyboard lock keyboard lock feature. Set the keyboard lock time, the idle screen, mobile phone within the set time the keyboard does not perform any operation, it will be automatically locked, then you can press the left soft key+ the end key to unlock. Power on display: The animation can be set to boot, you can 27 choose preset animation for mobile phones, but also into the File Manager, select the desired animation. Power off display: The animation can be set to shutdown, set with the power on display Show date and time: You can set the idle screen time display on or off. Flight mode This optional mode in which the phone is normal mode or flight mode, flight mode if you choose, the phone can only use some of the functions of non-communications Security settings SIM security You can use the PIN code, PIN2 code, set the boot password and set security features to protect information security. PIN password (PIN1) is the SIM card PIN. If the user dont changes the password, the original password is 1234 or 0000. If you enable the boot PIN code, then after each start 4-digit PIN code is necessary to input, PIN code can be amended, to protect their SIM card is not used by others. Note that, if the input PIN code wrong three times, the phone card will automatically lock and unlock prompted to enter PUK code, this time close to the edge of danger, so if unauthorized modification of the PIN code, we must bear in mind. PUK password (PUK1) from consists of 8 digits, which users can not change. PIN code when the phone is locked, and when prompted enter the PUK password, do not act rashly, because the PUK code input opportunities is only 10 times and if enter the wrong words for 10 times, SIM card will be permanently locked, that is scrapped. Part of the SIM card PUK code is never used when the user comes with the card, while the other part of the network operators will need to obtain the PIN code if you do not know the PUK code locked, do not random input, then the correct way is to call the SIM card hotline operators, after a simple user data are verified, you can obtain the PUK 28 password to unlock the phone lock, the service is free of charge. NotePlease use this feature with caution, if forget PUK password, please contact the network operator. If input PUK code in error for 10 times consecutively , SIM card will be scrapped. PIN lock Under this you can enable or disable PIN password, PIN code on or off are required to enter the correct PIN password. When open this feature, every time you turn the phone prompts you to enter the PIN password. Change PIN If the current PIN password is already open, you can make changes to the PIN password. First enter the old PIN password, after repeated twice to determine and identify new password. Change PIN2 PIN2Personal Identification Number 2password is to enter a particular function (such as setting a fixed number, set the call billing, etc.) to enter the personal identification number. Pin2 password is provided by suppliers for SIM card to another password, used to qualify the dial personal identification password, Mainly used to eliminate the call cost information, set the phone calls and the billing currency unit, the cost limit function, limited dial-up ("Security settings "---" limited dial-up" can only be opened after the phone call which can be used to set the number and do not call this). My phone's SIM card predictive value is 12345. Pin2 after input error password 3 will be locked, needed Puk2 to unlock. PIN2 password is used to set the phone billing. If you enter three times wrong, the phone will need PUK2 unlock password, the process described in the previous PIN password, PUK password the same. However, both the password and network SIM card billing and modify the internal data, it will not open, 29 and even if PIN2 password locked, it will not affect the normal use of mobile phones. Thus PIN2 password, and not to deliberately ignore PUK2 password. Note:
Please use this feature with caution, If input PUK code in error for 10 times consecutively, SIM card will be scrapped.. Phone security Under this password there you can set the phone to avoid unauthorized use of your mobile phone Phone lock Under this you can enable or disable phone password, phone password on or off are required to enter the correct phone password. When open this feature, every time you turn the phone prompts you to enter the phone password. Change password You can make changes to the phone password. First enter the old phone password, after repeated twice to determine and identify new password. Network settings Can be set automatically or manually select the network, select Automatic, the phone will be SIM card based on the network where the first selection, select Manual, you need to select the SIM card registered with the network operator can use the same network. Reset settings Reset the parameter value mobile phone, make your phone reset to default settings. Please enter a privacy password (initial password is 0000), restore factory settings. 30 4. Input methods the input method, This phone provides diversified input modes for you to enter letter information when editing SMS and adding phonebook. Use the # key to switch between different input methods. When editing the key controls:
The Right soft key: Press to clear one character, long press to clear all. The End/Power key: Return to the idle screen.
[*] key: In every input status, press this key to call out punctuation and symbol input frame. Smart ABC(abc) input method Smart ABC(abc) input method has association functions so that you can simply press each letter once to change the word order. Representatives of each key on the keyboard character, the input method will automatically compare phone language database, and select the correct word, so it needs more than the traditional input method saves time, smart input general methods of operation:
Every key is used to input its corresponding character and automatically change to compose word according to previous key's corresponding character. Fast and repeatedly press the Up/Down Navigator keys until your requisite character or word appear, and you can select it. You can press the left soft key to select the word or character, then press [0] key to confirm and enter the full word. ABC (abc) input method Each key is used to input several characters. Fast and repeatedly press key until your required character appears. When you need to input English punctuation and some special signs, press the [*] numeric key to call out special sign input box in English input status Press the [0] key to input blank once. The Numeric input method 31 To input numerical values, press the respective numeric keys. 32 5. Phone maintenance phones. of use mobile Mobile is a high-precision electronic products, please carefully maintained. The following suggestions can help you maintain phone, to extend the lifespan:
- Phone and its accessories should be placed out of the reach of children.
- Keep the device dry. Rain, humidity or moisture will corrode the circuit board. If the phone is accidentally flooded, shall promptly remove the battery, and immediately sent to a local authorized service center for processing.
- Do not place your phone in dusty places, this may affect the normal
- LCD display is easily damaged cell phone parts, mobile phone dropped onto the ground should be avoided or be strong vibration; prohibit the use of sharp objects to touch the screen.
-Do not place the phone where the temperature is too high. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt plastic shell phone.
- Do not place the phone where the temperature is too low. Otherwise, when the phone temperature to normal temperature, moisture will be generated internally, could damage the device electronic circuit boards. - Do not drop, knock or severe shaking the phone, so as not to damage the internal circuit boards and precision mobile structure.
- Do not use chemicals, cleaning solvents or strong detergents to clean the device, apply a soft cloth soaked in soapy water and gently scrub. - Do not use paint pigment cell phone to avoid moving parts and be stuck to proper
- Use a clean soft lens cleaning cloth. Such as: camera lens.
- Replacement antenna, use only the supplied or designated by the antenna. Use of unauthorized antennas, cell phone operation. 33 accessories or modifications, could damage the device and may violate regulations governing radio devices. 34 6. Accessories Use only batteries, chargers, and accessories approved by the manufacturer with this device. Use of any other types will invalidate the warranty and may be dangerous. Check with your dealer for available accessories. You may opt to buy:
Charger Plug, charger cable Charger plug used to connect with the charger cable for charging on wall outlets. Also you can use the charger cable to connect with the other devices such as the personal computers to charge the phone. Charging time is about 2 to 3 hours. The charging condition is displayed on screen. You may use your phone while charging. Earphone A mini, practical, hands-free device; you can use its button to answer and end calls. Some models may also come with a volume control knob. Do not plug or unplug the earphone when connecting dialed or incoming calls. Please to adjust the incoming call alert volume to the felicitousness before you plug in the earphone. 35 7. SAR interference interference received, This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any including interference that may cause undesired operation. FCC ID: QPN-NIKITI Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
---Reorient or relocate the receiving antenna.
---Increase the separation between the equipment and receiver.
---Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
---Consult the dealer or an experienced radio/TV technician for help. Body-worn Operation This device was tested for typical body-worn operations. To the 36 comply With RF exposure requirements, a minimum separation distance of 1.0cm must be maintained between the users body and the handset, including the antenna. Third-party belt-clips, holsters, and similar including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Specific Absorption Rate (SAR) information:
This wireless phone meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types: Mobiwire NIKITI, Altice F2has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use at the ear is 1.318W/kg and when properly worn on the body is 0.825W/kg. This device was tested for typical body-worn operations with the back of the handset kept 1cm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 1cm separation distance between the user's body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. Your mobile phone is rated: For Hearing Aid, to assist 37 hearing device users in finding mobile phones that may be compatible with their hearing devices. This device is HAC M4/T3 compatible. This phone has been tested and rated for use with hearing aids for some of the wireless technologies that it uses. However, there may be some newer wireless technologies used in this phone that have not been tested yet for use with hearing aids. It is important to try the different features of this phone thoroughly and in different locations, using your hearing aid or cochlear implant, to determine if you hear any interfering noise. Consult your service provider or the manufacturer of this phone for information on hearing aid compatibility. If you have questions about return or exchange policies, consult your service provider or phone retailer 1) To prevent possible hearing damage, do not listen at high volume levels for long periods. 2) Fully understand user manual before use. 3) Ensure your player at low volume levels or power off before you leaving. 38