FCC ID: QPN-3Q-MOBIPRINT3 Connected mobile with printer

Table of Contents 1.Foreword .......................................................... 2 2.Getting to know your device ........................... 5 3.Starting up the device ...................................... 6 4.Introduce the basic device function................ 8 5.Technical Specifications ................................ 14

................................................ 16 6.SAR 1 Foreword Safety In order to ensure the device is used safely and correctly, please read the precautions below carefully before use. 1.1 General precaution Your device is only suitable for the battery and charger approved by our company or else it may cause the battery to leak, overheat, explode or even catch fire. Do not knock, vibrate or throw the device heavily to avoid malfunction, fire, overheating, explosion or fire. If there are abnormal phenomena, like temperature rising, color change or distortion during the usage, charging or storage of the battery, please stop using it and replace it with a new battery. It may burn the skin if liquid in the battery leaks onto skin or clothes. If this happens please flush with plenty of clean water immediately and go to a hospital at once. Please keep the battery away from fire to avoid fire and explosion if the battery leaks or emits a strange smell. Do not place expose the battery to moisture or it may cause overheating, fumes and corrosion. Do not use or place the battery under direct sunlight, or in hot places, it may cause leakage and overheating, thus reducing performance and shortening the lifespan. Do not charge the battery for over 24 hours continuously. 1.2 Precaution for the use of charger Do not cause short circuit to the charger, or it may cause electric shock, fumes and damage to the charger. Do not use the charger if the power wire is broken, or it may cause fire and electric shock. Please remove accumulated dust on the power plug. Do not put water containers next to the power supply to avoid overheating, fire, electric shock and malfunction in case they come into contact. Do not disassemble or tamper with the charger or it may cause personal injury, electric shock, fire and the damage of the charger. Do not use the charger in places of high humidity, like bathrooms, or it may cause electric shock, fire and damage of charger. Do not touch the charger, power cord or power plug with wet hands or it can cause electric shock. Do not put heavy objects on the power cord or change the 2 the power socket before cleaning and power cord or it may cause electric shock and fire. Please unplug maintenance. Please hold the charger to unplug the socket as pulling the power cord may damage the power wire and cause electric shock and fire. 1.3 Cleaning and maintenance As the device, battery and charger are not waterproof, do not use them in places of high humidity and avoid them being wet by rain. Please clean the battery and charger with a soft dry cloth. Never use alcohol, thinner or solutions, like benzene, to wipe the device. Dirty sockets can cause poor contact and power down, and even make recharging unavailable. So, please clean them periodically. 1.4 Common Precaution Device:

Please use the device in an environment with temperature Charging -10- 55Discharging -10- 55. Operating Relativity Humidity Range75%. Please use the device far away from regular telephones, TV sets, radio sets and office automation equipment, to avoid affecting the normal use of these equipments and device. Battery:

Store the battery in cool and ventilated place without direct sunlight. The battery has a limited lifespan. The usage of battery will be shortened progressively due to frequent charging. Once the battery is out of use, it means that its lifespan has ended, and you will need to replace it with an approved new battery. Do not dispose of old batteries as household waste. Give them to specified disposal places and follow any stipulated instructions for disposal. CAUTION:RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCYIONS. Charger:

Do not charge under following conditions:

-- places with direct sunlight

-- places with ambient temperature -10-55, wet or dusty places with strong vibrations (it may cause malfunction)

-- places near electrical appliances (it may affect the image and 3 sound) like TV set, radio, etc

-- Adapter shall be installed near the equipment and shall be easily accessible. The plug considered as disconnect device of adapter. 4 Getting to know your device 5 Starting up the device To remove the back cover Make sure your device is turned off. Firmly hold the device with the front panel facing down. Slide your finger into the groove at the top of the device and gently pull open the back cover. To install the SIM card Remove the battery if it is installed. Locate the SIM card slot, and then insert the SIM card with its gold contacts facing down and its cut-off corner facing out of the card slot as shown in the diagram. Slide the SIM card completely into the slot Note: The device can support two SIM cards. To install a memory card To have additional storage for your images, videos, music and files, you can purchase a memory card and install it in your device. Locate the memory card slot on the upper part of the exposed right panel. Insert the memory card into the slot with its gold contacts facing down until it clicks into place. To install the battery 1. Align the batterys exposed copper contacts with the battery connectors at the bottom part of the battery compartment. 2. Insert the contacts side of the battery first and then gently push the battery into place. Replace the back cover. Charging the Battery New batteries are shipped partially charged. Before you start using your device, it is recommended that you install and charge the battery. Some batteries perform best after several full charge/discharge cycles. Note: Only the AC adapter and USB sync cable provided with your device must be used to charge the device. Connect the USB connector of the AC adapter to the sync connector on your device, and then plug in the AC adapter to an electrical outlet to start charging the battery. As the battery is being charged while the device is on, a charging icon appears in the title bar of the Home screen. After the battery has been fully charged, a full battery icon appears in 6 the title bar of the Home screen. Warning:

Do not remove the battery from the device while you are charging it using the AC or car adapter. As a safety precaution, the battery stops charging before it overheat Power on/off To power off your device, press & hold POWER. On release, the Device options menu opens. Select Power off and confirm. To power on again, press & hold power 7 Introduce the basic device function 1. Switch MainMenu style

(1) In default Home screen, slide your fingertip left and right along the screen to reveal the more home screen.

(2) On Home screen, click icon on the bottom of the screen

(Main menu icon) to enter the main menu screen, slide your fingertip left and right along the screen to reveal the more applications. 8 2. Home screen

(1) Read your notifications When you see a notification in the status bar, touch the bar and slide your finger down the screen to open the list of notifications displayed in the sliding window. Ongoing notifications report activities such as call forwarding ON, current call status, song playing. Notifications report the arrival of new messages, calendar events, and alarms. You can clear notifications list by selecting Clear notifications at the top of the notifications window. To open the message, reminder or other notification, you can touch the items. To close the notifications window, slide your finger up the screen.

(2) Create Home screen shortcuts and widgets:

From the Home screen, touch the main menu, and then click the WIDGETS. Touch&hold to pick up a widget to select a shortcut to some of your saved information (such as a play list), a widget

(a clock) for your Home screen. 9

(3) Move objects on the Home screen To move an icon or other item on the Home screen, you must first touch & hold it to enter move mode. The object will magnify when its ready to be moved. Without lifting your finger (or youll drop out of move mode), drag the object to the new position. To move an item to a section of the Home screen not in view, move it to the edge of the screen and hold it there for a moment. The screen view will shift;

position the object and release. 3. Camera All the pictures you can capture or view on your device are stored on a memory card, which must be installed in your device. Before you can use the Camera or view pictures in Pictures, make sure you have a card installed. 10 4. GPRS/WLAN network Your devices networking capabilities allow you to access the Internet or your corporate network through WLAN, GPRS, EDGE (if available). Date communication able to through GSM antenna or wifi antenna. You can also add and set up a VPN or proxy connection. To use WLAN on your device, you need access to a wireless access point Note: The availability and range of your devices WLAN signal depends on the number, infrastructure, and other objects through which the signal passes. To open the Browser you need to be connected to a network. 11 5. U-disk storage This device supports movable storage, i.e., the U-disk function. When the device is switched on, you see the icon in the status bar on the top of the screen when its connected to a PC by a data line. Touch the bar and slide your finger down the screen to open the list of notifications displayed in the sliding window. Select [USB connected] and touch [Turn on USB storage] to confirm, you can use the device as a U-disk. 6. Bluetooth The device supports Bluetooth(BT) functions, you can establish a wireless connection between the device with other compatible devices, and data transmission, you can establish a wireless connection between devices with a distance of up to 10 meters. Bluetooth connection may be interference by obstacles, such as walls or other electronic device. 1. Enter the setting menu, Touch the Bluetooth to open the function, idle screen will display BT icon in the status bar. 2. Open the BT discoverable, and device cannot be searched . 3. Before using the device as a Bluetooth device, you need to pair with the target device as follows:

-Sure your device has Bluetooth-enabled.

-Touch "Scan for devices." Bluetooth devices within the range of the device will start scanning.

-Touch the device you want to pair, to confirm password to complete the pairing 12 You can use Bluetooth to share the pictures, videos or music files with family and friends 13 Technical Specifications Technical Specifications Weight: 350g Dimensions: 183*76*68.3mm Battery: Juda GSM Band: 850/900/1800/1900 Battery Capacity: 2600mAh Standby Time: 300 Hours WIFI :802.11b\g\n GPS:support BT: support Note: Actual operating conditions depend on the local network environment, SIM, and user behavior. Warning: Any consequence caused by misuse, abuse, or not following any and all of the above-written suggestions and instructions shall not hold the producer in any way responsible to any degree. Announcement: The manufacturer reserves the right to change or upgrade specifications or software versions without prior or separate notice. Trade marks mentioned or used in this material belong to their respective owners. 1588 14 the in a interference This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. 15 SAR tests are conducted using standard operating positions accepted by the FCC with the Device transmitting at its highest certified power level in all tested frequency bands, although the SAR is determined at the highest certified power level, the actual SAR level of the device While operating can be well below the maximum value, in general, the closer you are to a Wireless base station antenna, the lower the power output. Before a new model device is a available for sale to the public, it must be tested and certified to the FCC that it does not exceed the exposure limit established by the FCC, Tests for each device are performed in positions and locations (e.g. at the ear and worn on the body)as required by the FCC. For body worn operation, this model device has been tested and meets the FCC RF exposure Guidelines when used with an accessory designated for this product or when used with an accessory that Contains no metal and that positions the handset a minimum of 1.5 cm from the body.Non-compliance with the above restrictions may result in violation of RF exposure guidelines. FCC ID: QPN-MOBIPRINT3 16

Manufactory: MOBIWIRE MOBILES (NINGBO) CO.,LTD No.999,Dacheng East Road,Fenghua City,Zhejiang ProvinceChina 315500 Fax

+86 574 88918949 Address Postal Code Contact Xu linzhong Tel

+86 574 59555707 Email:

Leander.xu@mobiwire.com.cn 1 Table of Contents 1.Foreword .......................................................... 3 2.Getting to know your touch device ................. 6 3.Starting up the device ...................................... 7 4.Introduce the basic device function................ 9 5.Technical Specifications ................................ 14

................................................ 16 6.SAR 2 Foreword Safety In order to ensure the device is used safely and correctly, please read the precautions below carefully before use. 1.1 General precaution Your device is only suitable for the battery and charger approved by our company or else it may cause the battery to leak, overheat, explode or even catch fire. Do not knock, vibrate or throw the device heavily to avoid malfunction, fire, overheating, explosion or fire. If there are abnormal phenomena, like temperature rising, color change or distortion during the usage, charging or storage of the battery, please stop using it and replace it with a new battery. It may burn the skin if liquid in the battery leaks onto skin or clothes. If this happens please flush with plenty of clean water immediately and go to a hospital at once. Please keep the battery away from fire to avoid fire and explosion if the battery leaks or emits a strange smell. Do not place expose the battery to moisture or it may cause overheating, fumes and corrosion. Do not use or place the battery under direct sunlight, or in hot places, it may cause leakage and overheating, thus reducing performance and shortening the lifespan. Do not charge the battery for over 24 hours continuously. 1.2 Precaution for the use of charger Do not cause short circuit to the charger, or it may cause electric shock, fumes and damage to the charger. Do not use the charger if the power wire is broken, or it may cause fire and electric shock. Please remove accumulated dust on the power plug. Do not put water containers next to the power supply to avoid overheating, fire, electric shock and malfunction in case they come into contact. Do not disassemble or tamper with the charger or it may cause personal injury, electric shock, fire and the damage of the charger. Do not use the charger in places of high humidity, like bathrooms, or it may cause electric shock, fire and damage of charger. Do not touch the charger, power cord or power plug with wet hands or it can cause electric shock. Do not put heavy objects on the power cord or change the 3 the power socket before cleaning and power cord or it may cause electric shock and fire. Please unplug maintenance. Please hold the charger to unplug the socket as pulling the power cord may damage the power wire and cause electric shock and fire. 1.3 Cleaning and maintenance As the device, battery and charger are not waterproof, do not use them in places of high humidity and avoid them being wet by rain. Please clean the battery and charger with a soft dry cloth. Never use alcohol, thinner or solutions, like benzene, to wipe the device. Dirty sockets can cause poor contact and power down, and even make recharging unavailable. So, please clean them periodically. 1.4 Common Precaution Device:

Please use the device in an environment with temperature Charging -10- 55Discharging -10- 55. Operating Relativity Humidity Range75%. Please use the device far away from regular telephones, TV sets, radio sets and office automation equipment, to avoid affecting the normal use of these equipments and mobile device. Battery:

Store the battery in cool and ventilated place without direct sunlight. The battery has a limited lifespan. The usage of battery will be shortened progressively due to frequent charging. Once the battery is out of use, it means that its lifespan has ended, and you will need to replace it with an approved new battery. Do not dispose of old batteries as household waste. Give them to specified disposal places and follow any stipulated instructions for disposal. CAUTION:RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCYIONS. Charger:

Do not charge under following conditions:

-- places with direct sunlight

-- places with ambient temperature less than 0 or over 40, wet or dusty places with strong vibrations (it may cause malfunction) 4

-- places near electrical appliances (it may affect the image and sound) like TV set, radio, etc

-- Adapter shall be installed near the equipment and shall be easily accessible. The plug considered as disconnect device of adapter. 5 Getting to know your touch device 6 Starting up the device To remove the back cover Make sure your device is turned off. Firmly hold the device with the front panel facing down. Slide your finger into the groove at the top of the device and gently pull open the back cover. To install the SIM card Remove the battery if it is installed. Locate the SIM card slot, and then insert the SIM card with its gold contacts facing down and its cut-off corner facing out of the card slot as shown in the diagram. Slide the SIM card completely into the slot Note: The device can support two SIM cards. The card will support 2G card. To install a memory card To have additional storage for your images, videos, music and files, you can purchase a memory card and install it in your device. Locate the memory card slot on the upper part of the exposed right panel. Insert the memory card into the slot with its gold contacts facing down until it clicks into place. To install the battery 1. Align the batterys exposed copper contacts with the battery connectors at the bottom part of the battery compartment. 2. Insert the contacts side of the battery first and then gently push the battery into place. Replace the back cover. Charging the Battery New batteries are shipped partially charged. Before you start using your device, it is recommended that you install and charge the battery. Some batteries perform best after several full charge/discharge cycles. Note: Only the AC adapter and USB sync cable provided with your device must be used to charge the device. Connect the USB connector of the AC adapter to the sync connector on your device, and then plug in the AC adapter to an electrical outlet to start charging the battery. As the battery is being charged while the device is on, a charging icon appears in the title bar of the Home screen. After the battery has been fully charged, a full battery icon appears in the title bar of the Home screen. Warning:

7 Do not remove the battery from the device while you are charging it using the AC or car adapter. As a safety precaution, the battery stops charging before it overheat Power on/off To power off your device, press & hold POWER. On release, the Device options menu opens. Select Power off and confirm. To power on again, press & hold power 8 Introduce the basic device function 1. Switch MainMenu style

(1) In default Home screen, slide your fingertip left and right along the screen to reveal the more home screen.

(2) On Home screen, click icon on the bottom of the screen

(Main menu icon) to enter the main menu screen, slide your fingertip left and right along the screen to reveal the more applications. 9 2. Home screen

(1) Read your notifications When you see a notification in the status bar, touch the bar and slide your finger down the screen to open the list of notifications displayed in the sliding window. Ongoing notifications report activities such as call forwarding ON, current call status, song playing. Notifications report the arrival of new messages, calendar events, and alarms. You can clear notifications list by selecting Clear notifications at the top of the notifications window. To open the message, reminder or other notification, you can touch the items. To close the notifications window, slide your finger up the screen.

(2) Create Home screen shortcuts and widgets:

From the Home screen, touch the main menu, and then click the WIDGETS. Touch&hold to pick up a widget to select a shortcut to some of your saved information (such as a play list), a widget

(a clock) for your Home screen. 10

(3) Move objects on the Home screen To move an icon or other item on the Home screen, you must first touch & hold it to enter move mode. The object will magnify when its ready to be moved. Without lifting your finger (or youll drop out of move mode), drag the object to the new position. To move an item to a section of the Home screen not in view, move it to the edge of the screen and hold it there for a moment. The screen view will shift;

position the object and release. 3. Camera All the pictures you can capture or view on your device are stored on a memory card, which must be installed in your device. Before you can use the Camera or view pictures in Pictures, make sure you have a card installed. 11 4. GPRS/WLAN network Your devices networking capabilities allow you to access the Internet or your corporate network through WLAN, GPRS, EDGE (if available) You can also add and set up a VPN or proxy connection. To use WLAN on your device, you need access to a wireless access point Note: The availability and range of your devices WLAN signal depends on the number, infrastructure, and other objects through which the signal passes. To open the Browser you need to be connected to a network. 12 5. U-disk storage This device supports movable storage, i.e., the U-disk function. When the device is switched on, you see the icon in the status bar on the top of the screen when its connected to a PC by a data line. Touch the bar and slide your finger down the screen to open the list of notifications displayed in the sliding window. Select [USB connected] and touch [Turn on USB storage] to confirm, you can use the device as a U-disk. 6. Bluetooth The device supports Bluetooth(BT) functions, you can establish a wireless connection between the device with other compatible devices, and data transmission, you can establish a wireless connection between devices in the device with a distance of up to 10 meters. Bluetooth connection may be interference by obstacles, such as walls or other electronic device. 1. Enter the setting menu, Touch the Bluetooth to open the function, idle screen will display BT icon in the status bar. 2. Open the BT discoverable, and other devices can search the device. 3. Before using the device as a Bluetooth device, you need to pair the device with the target device as follows:

-Sure your device has Bluetooth-enabled.

-Touch "Scan for devices." Bluetooth devices within the range of the device will start scanning.

-Touch the device you want to pair, to confirm password to complete the pairing 13 You can use Bluetooth to share the pictures, videos or music files with family and friends 14 Technical Specifications Technical Specifications Weight: 350g Dimensions: 183*76*68.3mm 2G Band: 850/900/1800/1900 3G Band: 850/900/1900/2100 Hardware Version: V02 Software Version: V03 Battery: Juda Accessories :

Battery typeLi-ion battery model18650/2S1P/2600mAh/7.4V ManufacyureDONGGUAN LARGE ELECTRONICS CO., LTD Adaptor Power modelS048CM0900500 ManufacyureTEN PAO INDUSTRIAL CO., LTD Battery Capacity: 2600mAh Standby Time: 300 Hours WIFI :802.11b\g\n GPS:support BT: support NFCSupport Note: Actual operating conditions depend on the local network environment, SIM, and user behavior. Warning: Any consequence caused by misuse, abuse, or not following any and all of the above-written suggestions and instructions shall not hold the producer in any way responsible to any degree. Announcement: The manufacturer reserves the right to change or upgrade specifications or software versions without prior or separate notice. Trade marks mentioned or used in this material belong to their respective owners. MobiWire Mobiprint3 use countriesEU countriesCameroon TunisiaSaudi ArabiaEcuadorand so on. 15 Operating Frequency Band (RF):

GSM 850: 824.0849.0 MHz (TX), 869.0894.0 MHz (RX) EGSM900:880.0915.0MHz (TX), 925.0960.0MHz(RX) DCS 1800: 1710.01785.0MHz (TX), 1805.01880.0 MHz (RX) PCS 1900: 1850.01910.0MHz (TX), 1930.01990.0MHz (RX) WCDMA 2100: 1920.0-1980.0MHz(TX),2110.0-2170.0MHz (TX) WCDMA1900:1850.01910.0MHz(TX),1930.01990.0MHz

(RX) WCDMA 900: 880.0915.0MHz(TX), 925.0960.0MHz(RX) WCDMA 850: 824.0849.0 MHz (TX), 869.0894.0 MHz (RX) Bluetooth: 2402-2480MHz (TX/RX) WIFI :2412-2472M (TX/RX) GPS :1575.42M(RX) NFC: Card mode : 17MHz , 106 kbps /212kbps/424 kbps Reader/writer mode:13.56MHz, 106 kbps /212kbps/424 kbps P2P mode: 13.56MHz, 106 kbps /212kbps/424 kbps Max. Of Transmit power:

GSM 850/900: PCL = 5, PWR = 31dbm 1 dBm(1up,1down for gprs test) DCS/PCS: PCL = 0, PWR = 27.5dbm 1 dBm(1up,1down for gprs test) WCDMA2100: PWR = 20 1 dBm WCDMA1900: PWR = 20 1dBm WCDMA900: PWR = 20 1 dBm WCDMA850: PWR = 20 1 dBm Bluetooth:4dBm+/-2dBm (BT3.0 test) BLE:-4dbm+/-2dbm (BT4.0 Test) Wi-Fi:

802.11b: max13dBm+/-2dB 802.11g: max 11dBm +/-2dB 802.11n(20): max 9dBm +/-2dB 802.11n(40): max 9dBm+/-2dB GPS:no TX 16 the in a interference This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. 17 SAR tests are conducted using standard operating positions accepted by the FCC with the Device transmitting at its highest certified power level in all tested frequency bands, although the SAR is determined at the highest certified power level, the actual SAR level of the device While operating can be well below the maximum value, in general, the closer you are to a Wireless base station antenna, the lower the power output. Before a new model device is a available for sale to the public, it must be tested and certified to the FCC that it does not exceed the exposure limit established by the FCC, Tests for each device are performed in positions and locations (e.g. at the ear and worn on the body)as required by the FCC. For body worn operation, this model device has been tested and meets the FCC RF exposure Guidelines when used with an accessory designated for this product or when used with an accessory that Contains no metal and that positions the handset a minimum of 5 mm from the body. Non-compliance with the above restrictions may result in violation of RF exposure guidelines. Body 0mm 1.253W/kg 10g Body 5mm 1.098W/kg 1g FCC ID: QPN-3Q-MOBIPRINT3 18 EU Declaration of Conformity for Radio Equipment Directive 2014/53/EU Services We, MOBIWIRE MOBILES (NINGBO) CO.,LTD hereby, declare that the essential requirements set out in the Radio Equipment Directive 2014/53/EU have been fully fulfilled on our product with indication below:

Product Name: Connected mobile with printer Model / Brand Name: Mobiprint3/Mobiwire The following standards have been applied for the investigation of compliance:

EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013 EN 50360:2001/A1:2012 EN 62209-1:2006 EN 62209-2:2010 EN 62479:2010 EN 50566-2013/AC: 2014 EN 301 489-1 V2.1.1 EN 301 489-3 V2.1.0 draft EN 301 489-17 V3.1.1 EN 301 489-52 V1.1.0 draft EN 301 511 V12.1.10 draft EN 301 908-1 V11.1.1 EN 301 908-2 V11.1.1 EN 300 440 V2.1.1 draft EN 300 328 V2.1.1 And apply notified body assessment:

19 Notified Body number 1588 American Certification Body, Inc. Suite C110, McLean, VA 22101, USA Furthermore, the ISO requirement for the in-process quality control procedure as well as the manufacturing process has been reached. The technical document as well as the test reports will be kept for a period at least 10 years after the last product has been manufactured at the disposal of the relevant national authorities of any Member State for inspection. Detail contact information for this declaration has been listed below as the window of any issues relevant for this declaration. 20 European Representative Manufacturer Contact Company:

Company: MOBIWIRE MOBILES (NINGBO) CO.,LTD Address:

Tel.:

Address: No.999,Dacheng East Road,Fenghua City,Zhejiang Name/Title: Xu linzhong 0574 59555707 Date:2017/3/6 21