60x95(mm) 128g +PANTON 2347C 1 Device and Accessories 2 Instructions 2 3 4 5 6 Ear Fin Next Song / Volume Up Earbud Previous Song / Volume Down Micro USB Charging Port 1 1 2 3 4 5 6 5 Specifications Bluetooth Standard Bluetooth 4.1 Operation Range Talking Time Playing Time Charging Time Charging Voltage Standby Time 33 feet 5-6 hours 5-6 hours 2 hours DC 5V 150 hours NOTE Actual play and talk times will ultimately depend on the phone / mobile device you are using, the listening volume, as well the frequency of the use of the different buttons and toggling between functions. BMBH293A Bluetooth Earphone For More Information Please Visit www.xmpow.com Next Song / Volume Up/Previous Song /
Volume Down Press Buttons Long Press Short Press Next Song Volume Up Press Buttons Long Press Short Press Previous Song Volume Down Charging the Earphone Output: DC 5V 0%
2h Charging 100%
Power off Pairing Connected This earphone has a built-in, non-removable lithium battery. We highly recommend that you fully charge the earphone before the rst use. 1. To charge, connect the charging cable to the charging port, and then to a USB charger. 2. The light will turn red the earphone is charging. 3. Red indicator light is on all the time when charging, and is off when fully charged. The blue indicator light is on all the time after fully charged. BMBH293A Earphone USB Charge Cable x 1 User Manual x 1 x 2 x 2 x 2 x 2 x 2 x 2 Ear Caps ( M Size-On Ear ) Ear Clip ( M Size-On Ear ) NOTE 1. As with all rechargeable batteries, the charge / discharge cycles affect the batterys performance over time. The earphone automatically turns OFF while charging. You will hear a voice prompt when the battery is low, and the red indicator will ash. The charging temperature is 50-113. 2. 3. 4. LED Behaviour 4 Work Status Indicator Light Status Voice Prompt Power on Blinking fast in Bright
(LED) for 3 times Red indicator light is on for 2 seconds then all of the light off. 2S Red and Bright indicator lights ash simultaneously Blue indicator light ash once every 10 seconds Power on Power off Pairing Connected x1/10S Low battery warning Red indicator light ashes 3 times x3 Battery Low Charging Red indicator light is on all the time when charging, and is off when fully charged. The blue indicator light is on all the time after fully charged 3 Operating the Earphone Using the Buttons Hold 3s Hold 3s Hold 5s Power ON Power OFF Pairing Mode REMARK Please make sure that the earphone is turned off before enter-
ing pairing mode. Holding the button for 5 seconds will turn the earphone on and enter pairing mode at the same time. If you just turn the headphone on, it will connect to the last mobile device that it was paired to. Pairing to a Bluetooth Device 1. Make sure the Bluetooth on the mobile device you are trying to connect the earphones to is on. Hold the button for 5 seconds to enter pairing mode. The red and blue indicators will start ashing. In your devices Bluetooth list, search for MPOW X1.0, click on it, and your devices will pair. The earphone will automatically power off after 5 minutes with-
out being paired to a device. 2. 3. 4. Settings Bluetooth DEVICES MPOW X1.0 Range < 1M Bluetooth Connected Choose MPOW X1.0 to Connect FCC Statement Operation is subject to the following three conditions:
1. 2. 3. This device may not cause harmful interference. This device must accept any interference received, includ-
ing interference that may cause undesired operation. This device has been evaluated to meet general RF expo-
sure requirements. The device can be used in portable exposure condition without restriction. NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harm-
ful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or a technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Play / Pause / Answer Call / Hang Up call Press Buttons Short Press Short Press Hold 1S~2S
/
/
Reject an Incoming Call Answer / Hang up Play / Pause Activating Voice Control / Your Devices Personal Assistant To activate voice control, simply hold the power button for 4 seconds, and you will hear your phones notication that voice control is activated. You can now ask your personal assistant whatever you want, from the microphone on your earphone. NOTE If a call comes in while you are listening to music or stream-
ing a video, the audio / video will be paused, and you will hear your phones ringtone through the headphone. Once the call is ended, your entertainment will resume. The Bluetooth word mark and logos are registered trade-
marks owned by Bluetooth SIG, Inc. and any use of such marks by [ MPOW TechnologyLTD ] is under license. Other trademarks and trade names are those of their respective owners. WARNING!
1. 2. 3. The product can ONLY be charged by 5V Adapter/USB Port, otherwise it will cause heat and re. The BMBH293A is not a toy, please supervise your children when using the equipment. To avoid potential risks and protect products, please do not charge it at a temperature lower than 50 or higher than 113. www.xmpow.com | support@xmpow.com MPOW TECHNOLOGY CO.,LTD Copyright MPOW Inc. All rights reserved. FCC ID: XXX-XXXXX This device complies with Part 15 of the FCC Rules. MADE IN CHINA