Invexs 190 readers Mifare DESfire dual technology mullion readers Install Manual GENERAL The Invexs 190 reader series is capable of reading (simultaneously) Mifare and DESFire credentials due to its dual reader technology. The Invexs 190 is designed to be used on door pillars (mullion) and suitable for outside and inside use. A model with keypad is also available. The Invexs output must be set to RS485 protocol (encrypted). Functionality and output are determined by the configuration of the Invexs reader. The configuration is defined using the programm AEreco, and deployed by the configuration card or via AEmon. Three LEDs (red, green, blue) and beeper are included. LEDs around the keypad ciphers light up only in case a PIN code is requested. The pigtail cable can be lead directly backwards or when using the additional spacer (art. nr . 9949887) to the top or bottom. DIMENSIONS Dimensions: 7.52 x 2 x 1.2 in. 4 mounting holes available at 1.26 x 6.1in Cable pigtail: 10 x 26AWG shielded, 10 ft Optional spacer (max thickness 0.4 in) is available for other cable outlet (top or bottom) 10 x 26AWG Shield 5
. 4 1 4 x 5 5 5 1 0 4 5 7 12 1 9 1 1 32 30 50 Note: drawing dimensions are in mm MOUNTING PROCEDURE INVEXS For mounting the Invexs 190, the mounting plate must be placed on the wall first. For removing the mounting plate from the Invexs 190, unscrew the screw
(1) (Torx, M5) at the bottom of the Invexs and push the Invexs 190 slightly up (2). The plate can be mounted using the 4 holes. Place the cable to the correct position and replace the Invexs 190. 2 Push up 1 Un screw Mounting plate Version 6 Date : 08 April 2013 This information is furnished for guidance, and with no guarantee as to its accuracy or completeness; its publication conveys no licence under any patent or other right, nor does the publisher assume liability for any consequence of its use; specifications and availability of goods mentioned in it are subject to change without notice; it is not to be reproduced in any way, in whole or in part, without the written consent of the publisher. Nedap N.V. P.O. Box 6 NL-7140 AC GROENLO The Netherlands Page 1 of 4 Part.no.: 5281121 Invexs 190 readers Wire Colour Function Do not connect Power in (12-30VDC) 1 2 3 4 5 6 7 8 9 10 11 Power Ground RS485 A (-) RS485 B (+) Red Black Grey Violet Green White Yellow CONNECTIONS Invexs is not hot-swappable, so when making or changing connections, power must be switched Off. Remark:
Cable shield (wire 11) must be connected to the metal case of the external device LED INDICATORS INSIDE / BACKSIDE There are two LEDs available: Blue for Status (of application), Green for Identification (both visible behind the SAM cover at the back side) EM shield (connected to power ground) Pink Blue Brown Reserved for future use Shield / Metal SAM cover ST: STATUS (blue) Slow blinking Fast blinking 2 short flashes 3 short flashes Application running (operating) Downloading or error during loading Application present but not active No application present ID (green) Blinking Card detected Nedap N.V. Invexs 190 readers Install Manual Page 2 of 4 Invexs 190 readers LED INDICATORS FRONT At the front a three colour LED is positioned at the middle of the Invexs Depending of the used configuration the function of these LEDs can differ:
Green LED: Card is been authorised (UL led) Red LED:
Blue LED:
Card is not authorised (NA led), controller is stand-by Blinks fast:
No configuration is availabele at this Invexs (present Configuration Continuously ON: Determined by configuration: E.g. Reader stand-by. card or load Configuration first).
(Blue LED is activated if UL is OFF and NA is more than 1 sec OFF) Remark: Function of LEDs and Beeper is controlled by used application settings of Invexs. AEOS RS485 interface FIRMWARE Pay attention that the firmware loaded in the Invexs together with the Invexs type and configuration determines functionality and protocols. Default (from factory) the Invexs handles the credentials on several ways simultaneously:
Mifare cards (CSN) as: RS485NR, RF data Remark: The Invexs 190 requires dedicated firmware (not identical to the Invexs 170 firmware) SYSTEM CONFIGURATIONS (how to connect Invexs readers) Remark: Configurations can be determined by the AEreco (loaded by AEmon or configuration card). BEEPER INDICATIONS Beeper is also used for indication of loading the configuration:
To AP4x03 readers with RS485 special encrypted protocol. (LEDs, Beeper, Keys and Display are controlled over the RS485 communication) High sound beep (happy sound): Configuration is loaded correct, second high sound beep indicates that this configuration can be used with this Invexs Low sound beep (unhappy sound): Configuration is not correct loaded or no configuration available at startup Nedap N.V. Invexs 190 readers Install Manual Page 3 of 4 Invexs 190 readers FCC and IC CERTIFICATIONS This device complies with part 15 of the FCC Rules and to RSS210 of Industry Canada. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Cet appareil se conforme aux normes RSS 210 exempts de license du Industry Canada. L'opration est soumis aux deux conditions suivantes:
(1) cet appareil ne doit causer aucune interfrence, et
(2) cet appareil doit accepter n'importe quelle interfrence, y inclus interfrence qui peut causer une opration non pas voulu de cet appareil. Les changements ou modifications nayant pas t expressment approuvs par la partie responsable de la conformit peuvent faire perdre lutilisateur lautorisation de faire fonctionner le matriel. SPECIFICATIONS Invexs 190 Product numbers see table below:
Invexs 190 Reader Invexs M190 Invexs MD190 9945512 9948406 Invexs 190 Reader + Keypad Invexs MK190 Invexs MDK190 9948422 Mifare 9948457 Mifare + DESFire Credentials Dimensions:
Protection:
Power Supply:
Environment:
Communication:
Indicators:
Antennas (internal): 13.56 MHz, Mifare compatible R&TTE:
7.52 x 2 x 1.2 in IP65 12VDC 30VDC Temperature: Operating and Storage: -31F to +150F Relative humidity: 10 93% non condensing RS485 (Encrypted AEOS protocol to AP4x03, (firmware APx003rs485NR). UL (green) NA (red) ,MD (blue) Detection distance Mifare card: 1.5 in Power consumption:
Weight: 0.78 lb M/MD190:
60mA@12VDC, 35mA@24VDC MK/MDK190: 90mA@12VDC, 45mA@24VDC Hereby, Nedap N.V., declares that these products comply with the essential requirements and provisions of the Directive 1999/5/EC of the European Parliament and of the council of March 9, 1999 on Radio equipment and Telecommunications Terminal Equipment and the mutual recognition of their conformity and with the provisions of Annex IV (Conformity Assessment procedure referred to in article 10). CABLE SPECIFICATIONS 10 wire shielded cable of approx. 10 ft length included (pig tail). Extensions can be made:
RS485:
Power:
22AWG twisted pairs, shielded, max cable length: 3280 ft, cable capacity <= 33pF/ft. 22AWG twisted pairs, shielded, max cable length: 160 ft. MORE INFORMATION: For more detailed information contact your local Nedap supplier or check the internet site. Nedap N.V. Invexs 190 readers Install Manual Page 4 of 4