| submitted | available | document details (if available) | source link |
|---|---|---|---|
| September 01 2017 | December 01 2017 |
| various | Users manual | Users Manual | 1.23 MiB | September 01 2017 / December 01 2017 |
User Manual Set MidRanger + Antenna (9217967) The MidRanger + Antenna set is the ideal RFID item scanner for your library staff. The shielded antenna is developed to only read items that are put on top of the antenna, resulting that no mistakes will be made in reading the wrong items. The design of the product is perfected and aimed to fit in any environment. Version: 2.8 published on Monday, January 02, 2017 Technical support Email address support-library@nedap.com Visitors address Nedap Library Solutions Parallelweg 2d Groenlo The Netherlands Postal address Nedap Library Solutions P.O. box 102 7140 AC Groenlo The Netherlands Telephone Number Tel: +31(0)85 88 88 850 2016 Nedap Library Solutions The software / hardware described in this document / file is furnished under a license agreement and may be used only in accordance with the terms of agreement. Documentation copyright notice Any technical documentation that is made available by Nedap Library Solutions is the copyrighted work of Nedap Library Solutions and is owned by Nedap Library Solutions. Disclaimer NO WARRANTY. The technical documentation is being delivered to you and Nedap Library Solutions makes no warranty as to its accuracy or use. Any use of the technical documentation or the information contained herein is at the risk of the user. Documentation may include technical or other inaccuracies or typographical errors. Nedap Library Solutions has the right to make changes without prior notice. No part of this publication may be copied without the express written permission of Nedap Library Solutions, Parallelweg 2d, 7141 DC Groenlo, The Netherlands. Trademarks Nedap, and the Nedap logo are registered trademarks of Nedap N.V. Groenlo. Other product names mentioned in this manual may be trademarks or registered trademarks of their respective companies and are hereby acknowledged. Printed in the Netherlands. 2 www.nedaplibrary.com Table of Contents Technical support .................................................................................................................................................................................. 2 Table of Contents ................................................................................................................................................................................... 3 Safety Precaution ................................................................................................................................................................................... 4 IC FCC / IC STATEMENT........................................................................................................................................................................ 5 Compliance statements (part15.19) ....................................................................................................................................... 5 Warning (part15.21) ........................................................................................................................................................................ 5 Information to the User (Part 15.106(b)) .............................................................................................................................. 5 Dimensions ............................................................................................................................................................................................... 6 Content of Box ......................................................................................................................................................................................... 7 Installation Guide .................................................................................................................................................................................. 8 Antenna .................................................................................................................................................................................................. 8 Reader .................................................................................................................................................................................................. 10 First setup .......................................................................................................................................................................................... 11 IP Networking ................................................................................................................................................................................... 12 RFID modes ....................................................................................................................................................................................... 13 EAS ......................................................................................................................................................................................................... 14 ISO 15693 / I-Code ....................................................................................................................................................................... 15 Monitor ................................................................................................................................................................................................ 16 Operation of product ........................................................................................................................................................................ 17 Setup ..................................................................................................................................................................................................... 17 Switching on/off ............................................................................................................................................................................. 17 Use of antenna ................................................................................................................................................................................ 17 Maintenance .......................................................................................................................................................................................... 18 Software .............................................................................................................................................................................................. 18 Cleaning instruction ..................................................................................................................................................................... 18 Frequently Asked Questions ......................................................................................................................................................... 19 Discarding ............................................................................................................................................................................................... 20 Technical Specifications .................................................................................................................................................................. 21 EU Declaration of Conformity ...................................................................................................................................................... 23 3 Safety Precaution Installation of these products must be performed by a qualified installation partner. Do not use the product in damp places. If you smell smoke or other odors or hear a strange sound, unplug the power cord and contact your dealer. Protect the power cord, USB cable, Ethernet cable and antenna cable from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cable connects to the product. Do not disassemble, repair or modify the product at your own discretion. To reduce the risk of electrical shock or damage, do not expose this device to rain or moisture. Refer all servicing to qualified service personnel. Servicing is required when the system has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled, or the device has been dropped. WARNING: Do not place near electromagnetic fields. 4 www.nedaplibrary.com IC FCC / IC STATEMENT FCC ID: CGDMIDRANGER IC: 1444A-MIDRANGER Compliance statements (part15.19) This device complies with part 15 of the FCC Rules and to RSS210 of Industry Canada. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Cet appareil se conforme aux normes CNR210 exempts de licence du Industriel Canada. L'opration est soumise aux deux conditions suivantes:
(1) cet appareil ne doit causer aucune interfrence, et
(2) cet appareil doit accepter n'importe quelle interfrence, y inclus interfrence qui peut causer une opration non pas voulu de cet appareil. Warning (part15.21) Changes or modifications not expressly approved by party responsible for compliance could void the users authority to operate the equipment. Information to the User (Part 15.106(b)) Note: This equipment has been tested and found to comply with the limits for a class B digital devices, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequent energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does not cause harmful interference to radio or television reception, which can be determine by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This radio transmitter 1444A-MIDRANGER has been approved by Industry Canada to operate with the antenna type Model 9564918 (see page 7 of this Manual) with the maximum permissible gain indicated. Antenna types other than 9564918 having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. 5 Dimensions 6 www.nedaplibrary.com Content of Box When you receive the box, it is strongly advised to check the contents of the box before installation. The box should contain the following components:
Antenna 9564918 Reader 9564675 Net adapter 9651802 Documentation o This manual o RF.Test Lite manual The antenna has a 2 meter RG174 cable with a SMA connector. The reader has a power connector, an USB port, an Ethernet port, and a SMA connector for the antenna. 7 Installation Guide Antenna Because the antenna is shielded, it can be used in a lot of different environments. It can be placed on any desk type, but when it is mounted below a table, the table should be made of a material that doesnt influence 13.56MHz RFID fields. So wooden tables or plastic tables will work, but metal tables will disrupt the antenna and make it not work. The field in which the antenna will read a tag can be found in the image below. Make sure that when a book is placed on the reader, the actual tag is within the area shown below. Note: The antenna might disrupt the functionality of mice, keyboard or other input devices when these devices are put in the antenna field. On table Make sure that there will not be any metals present in the antenna field when using it on top of a table. Also make sure that the cable of the antenna is not kinked or stressed in any way possible. 8 www.nedaplibrary.com Below table When looking for a good spot to mount the antenna, make sure the table doesnt have any metals near the antenna (field). When a good spot is found, you will need 4 fastening screws (corresponding to your table material), and a drill to prepare the table. Tape the template (which you can cut out from the next page) on the surface where you want to place the antenna. Make sure to take into account the minimum distances from the sides of the template. These go both ways. Open up the MidRange Antenna, by carefully removing the screws on the bottom of the product. Put the hood in the desired position, and drill four holes through the hood into the table while holding the hood in place. Make sure to use a smaller drill than the diameter of the screw, so that the screw will tap itself further into the table. TIP: Use DuctTape, or a clamp to keep the hood in place, whilst drilling the holes and mounting the hood with the screws. (Remove when remounting the bottom) Re-attach the bottom of the antenna to the mounted hood. Be careful not to destroy the thread in the mounting points of the hood when doing so. 9 Reader The reader itself can also be placed on top of a table, or can be mounted under a table, or against a wall. The reader is mounted using three screws. Always make sure that none of the cables is under any stress when mounting the reader. On table Get the rubber feet from the packaging, and place these under the reader casing to make sure it will not scratch the surface that it will be placed upon. Below table or on wall The reader can also be mounted under a table, or against a wall. This can be done using 3 screws, supplied with the reader. Predrill the three holes in the surface. The pattern for these holes can be found in the drawing T5760925-40.01. Place the top two screws, and screw them in so that the head of the screw is only 1 or 2 mm out of the surface. Remove the hood of the MidRanger by levering a screwdriver carefully in the opening at the front of the reader. Slide the MidRanger onto the two screws, and place the third and final screw. Snap the hood back onto the reader. 10 www.nedaplibrary.com First setup Before connecting and switching the reader on, make sure to download the drivers and the RF.Test Lite tool on the computer which is going to be used to configure the reader. The drivers and RF.Test Lite can be found on the support site (http://www.nedaplibrary.com/support). Although the reader can be connected to the network via Ethernet, the reader will always need to be set up the first time via USB. Connect the reader to the computer with the drivers, using the USB cable. The product can now be configured with the RF.Test Lite tool. Find out which virtual COM-port is corresponding to the RFID reader, by checking its settings in the device manager ( > Control Panel
> Devices and Printers > Device Manager). The reader will be called Silicon Labs CP210x USB to UART Bridge (COM#) under Ports (COM & LPT). The number between the brackets is the number that you will need to configure the reader. Note: Whenever the reader is disconnected and reconnected, it could get a new COM-port number. Now you may start the RF.Test Lite tool, press the CFG button, and select the correct COM-port according to the number youve just found in the Device Manager. Now the Reader is connected via USB, and you may alter the settings under the TUNING button. 11 IP Networking To change the IP-address of the reader, the reader needs to be connected with an RS232 or USB connection to the pc. When a different IP-address is configured the changes are effectively immediate, so when connected over the network, the connection will be lost immediately. 1. Press the Tuning button in the bottom right corner of the Communication Setup window. 2. RfTest.Lite will now read all the settings from the reader. This will take a few seconds. When it has finished, the Reader Settings window will appear. 3. The Reader Settings window has different tabs which all configure different settings. See chapter 4 for a more detailed explanation of this window. 4. Select the IP Networking tab. 12 www.nedaplibrary.com 5. Here you can find the following settings:
a. RFID IP: IP address of RFID reader b. RFID Subnet: Subnet address of the RFID reader c. RFID Gateway: Gateway of the reader 6. It is also possible to put the reader in DHCP mode, so it will get an IP-address from a local DHCP server in the network during power-up. In the Communication Setup window the current IP-address of the reader can be retrieved by using the Get DHCP Status button. With the DHCP Request button a manual DHCP request can be performed. When changing a setting, the setting will be saved when another field is activated via the Tab key or by clicking another field with the mouse. RFID modes In this tab, the following settings can be changed:
RFID Protocol: choose either the Icode or ISO15693 protocol, or set it to Combi for both. Signal: choose the Power and Modulation from 0 to 255, 0 being lowest and 255 being highest. MUX: when using a MUX, here you may select how much antennas youve connected and how high the MUX switching time should be in milliseconds. Synchronization: enable you to synchronize multiple readers. Power control: Use the sync-In to control the power of the reader. 13 EAS This tab shows the settings for an EAS or an AFI alarm. Alarm: Check to switch the relais/beeper upon the detection of a tag Alarm Type: Select the type of alarm (note: this type will also be programmed when enabling/disabling the alarm on a tag using the appropriate commands) EAS Settings: Edit the EAS beeper length and relais lengths AFI Settings: Edit the settings for the AFI alarm 14 www.nedaplibrary.com ISO 15693 / I-Code 15 Monitor This tab enables the different Monitor settings to be changed. Monitor Enabled: when monitoring is enabled, the reader will send out UDP packets over the network with the data of a detected RFID label. It will only do this when EAS is enabled. Ip: Fill in the IP address of the pc where the UDP packets should be sent to Port: Give the port number for connecting to the IP address. Default port is 7001 Notes See the BiblioCheck4 Monitor document to see how the packets can be received and handled. EAS needs to be turned on for the monitor function to work For ISO15693 tags this function will only work when in AFI mode. Then the UID and data of a tag is transmitted in a packet When an optionally UHF module is connected, the EPC number of an UHF tag is transmitted in the data field of the udp packet. The UID (or ID) field of the packet contains the 64bit truncated version of this EPC number. See the BiblioCheck4 Monitor document. All the settings of the configuration can be found in the RF.Test Lite manual (this manual can also be found on the Nedap library support site). 16 www.nedaplibrary.com Operation of product Setup Screw the SMA connector from the Antenna tightly on the Reader. Then connect the USB and/or the Ethernet cable to connect it to your laptop or network. The last connector is the power cable, which you use to switch the setup on or off. Switching on/off To switch the reader on, connect the supplied 12V power adapter, and plug it in. To switch the reader off, disconnect the power adapter. Use of antenna The antenna can be connected with the SMA-connector to the reader. The antenna is designed so that you can slide over one item at a time, or you can stack the items upon it. TIP: Make sure that the tag of an item is in the Antenna Field when you want to scan it. It might happen that your item is bigger than the reader. In that case, if the reader doesnt see the book, try to move the large item through the antenna field, making sure that all the edges of the book will be in the antenna field, until te reader recognizes the item. 17 Maintenance Software It is always recommended to update the software versions to the latest version, which can be downloaded from the Nedap Library website: http://www.nedaplibrary.com/support. This should at least be done once a year, during a maintenance check. Cleaning instruction The Antenna and reader should be cleaned in three steps:
1) Clean with a damp cotton cloth 2) Clean with a dry microfiber cloth 3) Apply a Stainless Steel cleaner to the stainless steel parts. Do not use any solvents, abrasives, alcohol, spirit, thinners or other harsh cleaning liquids. 18 www.nedaplibrary.com Frequently Asked Questions Question 1.: Why are there not yet any FAQs?
Since the product is just released, we do not have any questions which are frequently asked. For any questions please contact the helpdesk at http://www.nedaplibrary.com/support.html. 19 Discarding The product should be discarded as electronic equipment, according to the Waste Electrical and Electronic Equipment Directive (WEEE). 20 www.nedaplibrary.com Technical Specifications Physical Specifications Article numbers:
9217967 Set MidRanger + Antenna 9564675 (MidRanger) and 9564918 (Antenna) Dimensions (mm):
MidRanger:
Antenna:
Ca. 140 x 105 x 29 (l x w x h) Ca. 348 x 285 x 20 (l x w x h) Material:
Weight:
Stainless Steel, Zinced Steel (Powder coated) and HIPS Antenna ca. 4kg Reader ca. 0,6kg Function:
Check-in / Check-out / staff-station Color:
Black (RAL 9005) and Brushed Stainless Steel Mounting:
Placed on desk, or mount underneath Table/Desk Cable length:
2m RFID specifications Technology:
Frequency:
RFID 13.56MHz Maximal power:
1W Identifies:
ISO 15693 / ISO 18000-3.1 EAS-function:
Yes, based on EAS-bits and/or AFI Connection / Communication specifications Communication ports:
USB / UTP Max length communication cable: USB: 5m / UTP: 90m IP address:
Static/DHCP 21 Electrical Specifications Supply voltage:
AC: 100V-230V, 50/60HZ Working voltage:
DC: 12V Power consumption:
Max. 5 Watt Length power cable:
1,5m Environmental Specifications Operating temperature:
+0 / +40 C Storage temperature:
-10 / +55 C Do not mount under:
Metal desk / table 22 www.nedaplibrary.com EU Declaration of Conformity 23 Nedap Library Solutions | www.nedaplibrary.com | info@nedaplibrary.com 24 www.nedaplibrary.com
This product uses the FCC Data API but is not endorsed or certified by the FCC