STOREIDP UHF RFID reader User Manual

 

2 3 4 1 2 1x !D Pos dimensions 0 0 2 0 2 2 355mm / 14 340mm / 13.4 355 340

. 2 0

m m Center of antenna 5 4,5

. 4 3

. 4

0 1 1 m m 0 1 1 6 1 4 121,25 121.25mm / 4.8 121,25 355 340 F E D 26 52 C F 3 E D 9

. 7

0 0 2 m m 0 0 2 7

. 8

0 2 2 m C m 0 2 2 Center of antenna REV. 2012-08-23 DATE Documentation released DESCRIPTION ROUGHNESS ACC. ISO A GROENLO HOLLAND 26mm / 1 GENERAL TOLERANCES SCALE:

52mm / 2.1 FORMAT:

DIM. IN MM 1:5 A4 LIN. 0.2 ANG. 1 DRW:

CHCK:

DSGN:

CB 26 CB 52 CB UNIT STORE ID POS READER B 9965599 Copyright (c) by N.V. Nederlandsche Apparatenfabriek NEDAP. No part of this drawing may be reproduced or distributed in any form or by any means, or stored in a data base or retrieval system without the prior written permission of NEDAP. Ref.Nr. REV. A DATE 2012-08-23 SHEET:

DRAWING:

ARTICLE NUMBER REV. weight: 1.5 kg 6 CB B 1 4 APPROVED 20120823 20120823 20120823 2 0

. m m 6 a 6

. 1

m m A 1 4 1 2 3 4 5 6 7 8 F E D C B A 4 2x tie-wrap weight: 1.5 kg 1 F 1 E D C B F E D C B

!D POS F E D C B

APPROVED YYYY-MM-DD YYYY-MM-DD YYYY-MM-DD DSGN:

DRW:

CHCK:

ARTICLE NUMBER REV. N/A SHEET:

DRAWING:

A.01 10.01 OF 1 N/A 8 A 6 1x Power Supply ROUGHNESS ACC. ISO 1302 in M N/A DESCRIPTION

Ref.Nr. A REV. YYYY-MM-DD DATE Documentation released DESCRIPTION 1x Power cord C5 GROENLO HOLLAND GENERAL TOLERANCES SCALE:

FORMAT:

DIM. IN MM 1:1 A3 LIN. 0.2 ANG. 1 ISO A 9651403 3 4 Copyright (c) by N.V. Nederlandsche Apparatenfabriek NEDAP. No part of this drawing may be reproduced or distributed in any form or by any means, or stored in a data base or retrieval system without the prior written permission of NEDAP. 5 4 6 7 5 2 3 2 remove cover

Ref.Nr. A REV. YYYY-MM-DD DATE Documentation released DESCRIPTION ROUGHNESS ACC. ISO 1302 in M N/A DESCRIPTION ISO A GROENLO HOLLAND GENERAL TOLERANCES SCALE:

LIN. 0.2 9965599 Copyright (c) by N.V. Nederlandsche Apparatenfabriek NEDAP. No part of this drawing may be reproduced or distributed in any form or by any means, or stored in a data base or retrieval system without the prior written permission of NEDAP. A 1 2 3 4 5 6 5 6 7 8 Table / desk 2 A F E D C B A Documentation released DESCRIPTION 40.01 OF 1 T9965-599 GROENLO HOLLAND 4 GENERAL TOLERANCES SCALE:

FORMAT:

DIM. IN MM 1:5 A4 LIN. 0.2 ANG. 1 DSGN:

DRW:

CHCK:

CB CB CB weight: 1.5 kg / 3.3 lb. CB APPROVED 20120823 A 20120823 20120823 3 ROUGHNESS ACC. ISO 1302 in M N/A DESCRIPTION mounting !D POS ISO A UNIT STORE ID POS READER ARTICLE NUMBER REV. 9965599 a Copyright (c) by N.V. Nederlandsche Apparatenfabriek NEDAP. No part of this drawing may be reproduced or distributed in any form or by any means, or stored 1 in a data base or retrieval system without the prior written permission of NEDAP. 2 3 SHEET:

4 DRAWING:

1 2 3 40.01 OF 1 T9965-599 4 center of antenna 4x screw

(not included) description:

quick reference !D POS GROENLO - HOLLAND chk:

drw: CB 2013/05/29 doc. article no: 9741224 rev. : A.02 Copyright by N.V. Nederlandsche Apparatenfabriek NEDAP. No part of this drawing may be repro-

duced or distributed in any form or by any means, or stored in a data base or retrieval system without the prior written permission of NEDAP. ROUGHNESS ACC. ISO 1302 in M Ref.Nr. DATE YYYY-MM-DD A REV.

Documentation released DESCRIPTION GROENLO HOLLAND GENERAL TOLERANCES SCALE:

FORMAT:

sheet: 45.01 of 1

DSGN:

DIM. IN MM 1:2

A3

drawing: T9741-224 CHCK:

DRW:

APPROVED YYYY-MM-DD YYYY-MM-DD YYYY-MM-DD LIN. 0.2 ANG. 1

ISO A N/A DESCRIPTION 9965599 N/A Copyright (c) by N.V. Nederlandsche Apparatenfabriek NEDAP. No part of this drawing may be reproduced or distributed in any form or by any means, or stored in a data base or retrieval system without the prior written permission of NEDAP. SHEET:

DRAWING:

A.01 10.01 OF 1 N/A ARTICLE NUMBER REV. F E D C B A

!D POS connections fix cable with tie-wrap fix cable with tie-wrap Micro USB cable (not included) Power supply UTP cable (not included) Led Blue Orange Red Firmware running Error Green RFID active Green Power

1 2 3 4 5 6 7 8 place cover connect voltage supply F E Power options:

1. use adapter in box. 2. use IEEE 802.3a* compatible Power over D ethernet (not compatible with Nedap Power-over-ethernet inserter used for !D Top or !D Gate) C Driver and config-tool on portal B

Ref.Nr. A REV. YYYY-MM-DD DATE Documentation released DESCRIPTION ROUGHNESS ACC. ISO 1302 in M N/A DESCRIPTION ISO A GROENLO HOLLAND GENERAL TOLERANCES SCALE:

FORMAT:

DIM. IN MM 1:2 A3 LIN. 0.2 ANG. 1

APPROVED YYYY-MM-DD YYYY-MM-DD YYYY-MM-DD DSGN:

DRW:

CHCK:

ARTICLE NUMBER REV. 1 2 3 4 5 6 7 9965599 N/A Copyright (c) by N.V. Nederlandsche Apparatenfabriek NEDAP. No part of this drawing may be reproduced or distributed in any form or by any means, or stored in a data base or retrieval system without the prior written permission of NEDAP. SHEET:

DRAWING:

A A.01 10.01 OF 1 N/A 8 F E D C B A Model: !D POS Region 2 FCC ID: CGDSTOREIDP IC: 1444A-STOREIDP This device complies with part 15 of the FCC Rules and to RSS210 of Industry Canada.Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Cet appareil se conforme aux normes RSS 210 exempts de license du Industry Canada. Lopration est soumis aux deux conditions suivantes:

(1) cet appareil ne doit causer aucune interfrence, et

(2) cet appareil doit accepter nimporte quelle interfrence, y inclus interfrence qui peut causer une opration non pas voulu de cet appareil. Les changements ou modifications nayant pas t expressment approuvs par la partie responsable de la conformit peuvent faire perdre lutilisateur lautorisation de faire fonctionner le matriel. FCC and IC Radiation Exposure Statement:

This equipment complies with FCC and Canadian radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Cet quipement est conforme a RSS-102 limites nonces pour un environnement non contrl. Cet quipement doit tre install et utilis avec une distance minimale de 20 cm entre le radiateur et votre corps. This Class B digital apparatus complies with Canadian ICES-003 Cet appareil numrique de Classe B est conforme la norme Canadienne ICES-003 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.