TRANSED 2.4 GHz Microwave ID System Users Manual Revision 2

TRANSIT EDGE WIRELESS 2008-11-18 This information is furnished for guidance, and with no guarantee as to its accuracy or completeness;

its publication conveys no license under any patent or other right, nor does the publisher assume liability for any consequence of its use; specifications and availability of goods mentioned in it are subject to change without notice; it is not to be reproduced in any way, in whole or in part, without the written consent of the publisher. Nedap IDEAS, P.O. Box 103, NL-7140 AC GROENLO Part # : 5268664 Page 1 of 8 TRANSIT EDGE WIRELESS CONTENTS 1 Introduction .............................................................................................. 3 2 System diagram....................................................................................... 4 3 Wiring diagram......................................................................................... 5 4 Contact Information ................................................................................. 6 5 FCC Declarations..................................................................................... 7 Appendix ........................................................................................................ 8 A.1 Specification TRANSIT.................................................................... 8 A.2 Specification AW900mT .................................................................. 8 A.3 Specification EDGEPLUS SOLO ES400......................................... 8 Nedap IDEAS, P.O. Box 103, NL-7140 AC GROENLO Page 2 of 8 TRANSIT EDGE WIRELESS Introduction 1 Thank you for your purchase of the NEDAP TRANSIT EDGE WIRELESS system. Nedap AVI manufactures some of the most reliable readers on the market today. Specializing in long range automatic vehicle identification, Nedaps readers are able to identify both the vehicle and driver up to 33 and at speeds up to 125 mph!

The TRANSIT EDGE WIRELESS, a long range reader, showcases specially developed technology from both HID and AvaLan wireless to provide a powerful web accessible reader at your perimeter. The NEDAP TRANSIT EDGE WIRELESS part no (9876790) exists of the following main components. TRANSIT NEDAP USA EDGEPLUS SOLO ES400 AW900mT ( Client at entrance/gate) AW2 antenna The Base station for the connection at your network exists of the following components. AW900iT part no (9877010) ( wireless access point at network connection ) AW2 antenna The functional main components are described in the Block diagram below. Nedap IDEAS, P.O. Box 103, NL-7140 AC GROENLO Page 3 of 8 2 System diagram TRANSIT EDGE WIRELESS AW900mT Wireless Modem 9876960 EDGEPLUS SOLO ES400 83000B HID MAC address for the edge solo The TRANSIT EDGE WIRELESS is complete wired up and ready for use. You have only to follow the next steps. Install the TRANSIT EDGE WIRELESS according the TRANSIT manual and the quick reference. Put also the included AW2 antenna on the top of the unit. Power up the TRANSIT EDGE WIRELESS with a 24 VDC 2A power supply. Perform initial setup as described in the Quick start guide

(AW900T Users Manual Supplement) and the AW900mT.

(USERS MANUAL) Check with the aid of the LED,s from the access and subscriber if the link is available. Tip you can use the Ethernet cable between the modem and the edge to share the network keys. Restore the connections after sharing the network keys and power down and up the TRANSIT EDGE WIRELESS and the base station. Connect the Edge Plus wiring according to the Installation Guide P/N 82000-902-ENEN. Nedap IDEAS, P.O. Box 103, NL-7140 AC GROENLO Page 4 of 8 TRANSIT EDGE WIRELESS To configure and communicate with the Edge Plus use the Quick Installation Guide. (Document number 82000-901A.20). 3 Wiring diagram ANTENNA AW2 Connection and wiring diagram TRANSIT EDGE WIRELESS AW900mT Wireless Modem 9876960 RF Power Terminal Power 24VDC from TRANSIT DATA 10Base Ethernet RJ45 Cat 5e cable EDGEPLUS SOLO ES400 83000B HID 9876820 PRNT SAM POWER SUPPLY PS24/12 7819315 10Base Ethernet DATA RJ45 PWR 12VDC Wiegand Gnd Data 0 Data 1 K1 Uin TrIt Wmod Aux Uout 24V GND 24V GND 24V GND 24V GND

+12V GND 24VDC input 2A GND O2 O3 INPUT 24VDC 2A The diagram above shows schematically the internal connection between the used modules. The Main connections are:

TRANSIT Edge Plus module o TRANSIT Wiegand output to the EdgePlus Module. o 24VDC Power connection to the PS24/12 Power Supply o Power connection to PS24/12 Power Supply o Wiegand Input from TRANSIT o Ethernet Cable from AW900mT module o Ethernet cable from Edge plus Module AW900MT Module Nedap IDEAS, P.O. Box 103, NL-7140 AC GROENLO Page 5 of 8 TRANSIT EDGE WIRELESS o Power connection to PS24/12 Power supply o Antenna cable to AW2 Antenna 4 Contact Information If you have any questions when configuring your TRANSIT EDGE WIRELESS Please contact:

Curtis Dennis NEDAP AVI Tuxen &Associates. Inc. Exclusive Agent The Americas Phone: 417-339-4730 ext. 101 e-mail: cdennis@tuxen.us web: www.nedapavi.com If you have any questions when configuring your HID edge system. Please contact:

HID Global (California, USA) Support: support_na@hidvertx.com Sales: sales@hidvertx.com Main: (949) 598-1600 Sales: (800) 210-4744 Telephone 1-800-237-7769 Fax number: (949) 598-1690 If you have any questions when configuring your AvaLan system Please contact:

Technical support: (650) 384.000 e-mail: support@avalanwireless.com web: www.avalanwireless.com Nedap IDEAS, P.O. Box 103, NL-7140 AC GROENLO Page 6 of 8 TRANSIT EDGE WIRELESS 5 FCC Declarations Compliance statement (part 15.19) This device complies with part 15 of the FCC Rules and to RSS210 of Industry Canada. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Warning (part 15.21) Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This in particular is applicable for the antenna which has been delivered with the TRANSIT EDGE WIRELESS. RF Exposure ( OET Bulletin 65 ) To comply with FCC RF exposure requirements for mobile transmitting devices, this transmitter should only be used or installed at locations where there is at least 20cm separation distance between the antenna and all persons. Information to the User (Part 15.105 (b)) Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

--Reorient or relocate the receiving antenna.

--Increase the separation between the equipment and receiver.

--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

--Consult the dealer or an experienced radio/TV technician for help. Nedap IDEAS, P.O. Box 103, NL-7140 AC GROENLO Page 7 of 8 TRANSIT EDGE WIRELESS Appendix A.1 Specification TRANSIT ITEM Protection class Operational temperature Storage temperature Relative humidity Identification range Power supply Frequency range Safety Complies regulations A.2 Specification AW900mT following the to SPECIFICATION IP65

-30C +50C (-22F +122F)

-40C +85C (-40F +185F) 10 93% non-condensing Typical 10 meters (33 ft) 24VDC +/- 10%, 500mA 2438.4MHz 2457.0MHz EN 60950 FCC Part 15.245 A.3 Specification EDGEPLUS SOLO ES400 Nedap IDEAS, P.O. Box 103, NL-7140 AC GROENLO Page 8 of 8