NWP-F50 Neo Smartpen User Manual

 

1. How to use Neo smartpen

(1) Charging the pen Make sure to charge the product after the purchase as it may have low battery. The LED lamp will turn red while the battery is being charged. Once charging is complete, itll change back to green.(If the battery is being charged with PC, PC will recognize the pen as a removable disk an the LED light turns violet.)

(2) Power ON/OFF If you press the power button or put the pen tip on the paper, the pen will be activated with LED lights on within a second.(The Auto Power function is enabled when the pen is first connected to the App. You can change the setting in the App.) When the power is on, hold the power button for more than 2 seconds, and the power will turn off with flashing LED lights. If there is no action taken for more than 20 minutes, the power will be turned off automatically.

(You can change the auto-power-off time in the setting. The longer auto-power-off time is set, the shorter pen usage time is available.) If you do not use this product for more than 10 seconds, it will automatically change to standby (low power consumption) mode to reduce battery power consumption.

(3) How to grip The recognition rate is heavily affected by the direction of the optical sensors angle. Sensor(oval shaped part adjacent to the pen tip) should face downwards. Deviating from the appropriate degree, or holding the pen in the wrong direction could cause difficulties with capturing your writing or drawing. Usage Angle Hold the pen that does not cause pressure on the wrist and maintain a natural writing angle. Allowable Recognition Angle Products acceptable recognition angle is -20 ~ +40.

(90 vertical standard)

(4) LED color status display Status Power ON Power OFF Being charged Fully charged LED Color illuminating

-

-

(1)Dimming illuminating illuminating and thenturned OFF Low battery power notification During USB connection Bluetooth connection standby During App connection Low storage notification During firmware update Firmware update failure Flashing illuminated Flashing

(1)Dimming Flashing

(1)Dimming Flashing Copyright2017 NeoLAB Convergence Inc.

(2)Verify optical sensor or usage environment illuminated (with alarms)

(1)Dimming : Indicates slowly getting dark and then bright while flashing.

(2)Check if theres any dirt around optical sensor or on papers. 2. Neo Notes App Neo Notes Smartpen works in tandem with mobile app Neo Notes The app can be downloaded from Google play or Applie app store. Please search for Neo Notes, Neo smartpen in the search bar to find the App 3. Registering Smartpen to mobile app STEP 01. STEP 04. STEP 02. STEP 03. STEP 01. STEP 02. STEP 03. STEP 04. Enable the Bluetooth function of the smart device. Run Neo Notes and tap the Pen Register Now button below. Please follow the instructions as shown in the app. If the pen has been successfully registered, the Pen Registration screen appears in the App. Now, press Start Neo Notes button and start writing on N notebooks. 4. Using without app connection Neo smartpen can be used when the mobile app is not running. The content that you write while the mobile app is off will be transferred later when the app and Neo smartpen are connected 5. How to use Neo Notes

(1) NoteBox Use notebook Lock function if you want to use the same type of notebooks for multiple times. STEP 01. STEP 02. STEP 03. STEP 01. STEP 02. STEP 03. Place long tap on the notebook that you wish to lock, then Share,Lock & Delete button will appear Select Lock button to move your notebook to NoteBox You can unlock the notebooks anytime.

(2) Using button Press button on your note page to see. Transcribe Transcribe your handwritten notes into digital text Tag Tag your notes to organiza and search them Recording Record voice while writing notes Replay Replay your written notes and/with voice Share Share the notes in PNG,PDF, TEXT & SVG format Edit Mode Edit,erase,change color/thickness or highlight your writing in the notebooks

(3) Pen preference settings Press button to see pen setting menu. Notebooks Check your current notebooks Notebox Check Your locked notebooks to NoteBox Activities Check your writing by date Tags Search tagged pages Note Search Search transcribed text Settings Select your pen & app settings News & Tips Check latest news & updated tips Pen Data Sync Transfer stored writing data to the app Firmware Update Update pens firmware to the latest version

(4) Color & Thickness change You have various pen colors and thickness settings to choose from in the app. Tap on and select a thickness and color

(while the smartpen is connected to the app) Tap anywhere outside the palette to make it disappear. icon, then a color palette will open 6. Notebooks & Stores Find the perfect fit for among our wide range of notebooks. World shop.neosmartpen.com(except Latin America and Africa)

* Pentips are D1 type which you can buy from any online or stationery store R1: Any dangerous activities with the pen tip are prohibited. R2: Stop the usage when the product gets heated. R5: Do not store the product after the usage where room temperature is possibly high, such as interior of vehicle. R7: Ink or any dirt in the product may cause illness in case of putting it ones mouth during usage. Product specification table Model Name Support NWP-F50 Supported OS / Bluetooth Specification Android iOS OS version Kitkat 4.4 or higher Bluetooth version 2.1 or higher iOS 8.1 or higher[iPod 5th generation, iPhone 5, iPad 3rd generation]

4.0 LE Bluetooth 4.2 (CLASSIC / BLE) Wireless Connection Receiving / Transmitting Frequency 2402 ~ 2480MHz Antenna Output Storage Media Battery Charging Time Rated Input Usage Time Class 2 90MB of internal memory Rechargeable Lithium Polymer Battery 3.7V / 300mAh About 2 hours DC 5V / 300mA 125 days in standby mode, 5 hours for continuous writing Length: 156mm (without a pen cap), thickness: 11.5~11.8mm / 22g (without a pen cap) USB2.0HS (microUSB) Temperature: 10~35 / humidity: ~95%

D1 multi pen ink refills

* Direct sunshine or any strong light may cause the loss of recognition of writing. PC Connection Method Usage Environment Ink refills Size and Weight Product Marketing Name(PMN): Neo smartpen Firmware Version Id Number(FVIN): REV. 1.0 PRODUCT WARRANTY PRODUCT WARRANTY Please contact the store where you purchased the product or NeoLAB Convergence for customer service/support. Neo smartpen provides guaranteed warranty in accordance with relevant laws of the specified country Product Warranty Product Name Product No. (Serial No.) Purchase Date Seller Purchase Price Keep the product no. (serial no.) in a safe place as it is required for checking the product warranty period when requesting customer service / support. The product no. is attached on the surface of the product package. FCC Information to User This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution Modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. IMPORTANT NOTE : FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. NOTE : THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE. SUCH MODIFICATIONS COULD VOID THE USERS AUTHORITY TO OPERATE THE EQUIPMENT. THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1)THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. IC Information to User This device complies with Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions:

(1) This device may not cause interference; and (2) This device must accept any interfer-

ence, including interference that may cause undesired operation of the device Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) lappareil ne doit pas produire de brouillage, et

(2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. 1, 2 .

(Serial No.)

. 7 , 14 .

(Serial No.) A/S .

(Serial No.) . PRODUCT WARRANTY_43