FCC ID: XIA-3G25WR HSPA+ 21Mbps Wi-Fi Router

Overview The NetComm 3G25W-R integrates a Wireless LAN and 3G WAN into one unit. Connection to the Internet is achieved through either a 3G service or via a fixed line xDSL/Cable/Satellite connection to the 3G25W-Rs WAN port, providing you with the flexibility to choose how you access the Internet. The 3G25W-Rs automatic failover ensures you are always connected by activating the 3G connection should the xDSL/Cable/Satellite connection drop out. Users are able to share a single 3G connection via both a wired and wireless connection to the 3G25W-R. With a built in 802.11n wireless access point, this router provides wireless speeds of up to 150Mbps, 150% faster than 11g technology. On top of this, the 3G25W-R has four LAN ports for wired connections to multiple devices. Rather than being restricted to certain USB modems, the 3G25W-R allows the user to simply insert an active SIM and utilise 3G Mobile Broadband for internet connectivity. The 3G25W-R includes advanced security features such as VPN pass-through, a full complement of wireless security options and a built in firewall. 1 Maximum wireless signal rate and coverage values are derived from IEEE Standard 802.11g and 802.11n Draft 2.0 specifications. Actual wireless speed and coverage are dependent on network and environmental conditions included but not limited to volume of network traffic, building materials and construction/layout. 3G25W-R Features:

Powerful wireless router with support for 3G Mobile Broadband Creates instant Wireless hotspots to share the Internet connection of a 3G USB modem or DSL/Cable modem Supports Wireless N standard with data speeds up to 150Mbps consoles One WAN port for alternate wired Internet connection

(DSL/Cable/Satellite via Ethernet) Four LAN ports to connect wired devices like PCs or gaming Ensures connectivity and business continuity with auto Internet failover from WAN port to 3G Mobile Broadband Easy WiFi Protected Setup (WPS) by the single touch of a button to establish a secure wireless connection Full Wireless security - WEP, WPA, WPA2 Browser based interface for configuration and management:

OS independent and easy to use Package Contents Your 3G25W-R Wireless Router with voice Package contains the following items:

3G25W-R Wireless Router Quick Installation Guide User Guide on CD Power Supply Unit Ethernet Cable If any of the above items are damaged or missing, please contact your dealer immediately. Minimum System Requirements Before continuing with the installation of your 3G25W-R Wireless Router, please confirm that you comply with the minimum system requirements. Active SIM card for 3G Broadband access if you want to use a 3G Broadband service. Subject to terms and conditions from your 3G Broadband Internet Service. Note:

Computer with Windows, Macintosh, or Linux-based operating systems with a working Ethernet adapter with TCP/IP Protocol installed. Internet Explorer version 6.0 or Netscape Navigator version 7.0 and above. Wireless Computer System Requirements Computer with a working 802.11b, 802.11g, 802.11n wireless adapter LED indicators:

(PICTURES) Status LED color Description Green in flash Device status is working. 3G Signal Strength LED Red in flash Amber in flash Red Red in quick flash Amber Disconnected. No SIM card / signal or unverified PIN code Connecting. Connected. Signal strength in level one

(weak) Roaming alert, and 3G signal is weak Connected. Signal strength in level two or three (middle) Amber in quick flash Roaming alert, and 3G signal is middle Green Connected. Signal strength in level four or five (strong) Green in quick flash Roaming alert, and 3G signal is strong 2G/2.5G LED Green Green in flash 3G/3.5G LED Green Green in flash USB / 3G LED WAN LED Green Green EDGE or GPRS connection is established Data packet transferred via 2G/2.5G UMTS/HSDPA/HSUPA connection is established Data packet transferred via 3G/3.5G Connected with 3G dongle via USB port RJ45 cable is plugged Green in flash Data access LAN LED Green RJ45 cable is plugged Green in flash Data access WiFi LED Green WLAN is on Green in flash Device is in WPS PBC mode Green in fast flash Device is in WPS PBC mode Restoring Factory Defaults This feature will reset the Router to its factory default configuration. Occasions may present themselves where you need to restore the factory default settings on your router. Typical situations are:

You have lost your password and unable to login to the router;

You have purchased the router from someone else and need to reconfigure the device. You are asked to perform a factory reset by a member of the excellent NetComm Support Staff. In order to restore your router to its factory default settings, please follow these steps:

Ensure that the router is powered on (for at least 20 seconds). Use a paper clip or a pencil tip to depress the reset button for ten seconds and release. At this point, the reset is in progress. Do not power off the unit at this point. After the router reboots, the default settings are now restored. This entire process takes several minutes to complete. Once you have reset the router to its default settings you will be able to access the devices web configuration using http://192.168.1.1 with password admin. Default Settings LAN (Management) Static IP Address: 192.168.1.x Subnet Mask:

Default Gateway: 192.168.1.1 255.255.255.0 WAN (Internet) WAN mode:

Wireless SSID:

Security:

WEP Key:

Modem Access DHCP

(refer to the wireless security card insert) WPA2-PSK

(refer to the wireless security card insert) Password:

admin Connecting your 3G25W-R Wireless Router Step 1: Attach the antenna. 1. Remove the antenna from its plastic wrapper. 2. Screw the antenna in a clockwise direction to the back panel of the unit. 3. Once secured, position the antenna upward at its connecting joint. This will ensure optimal reception. 4. And pull out the USIM/SIM & PWR labelled tag. 5. Ensure the Power Switch is off. DO NOT connect the 3G25W-R to power before performing the installation steps below. Step 2: Insert a SIM/USIM into the 3G25W-R. Step 3: Insert the Ethernet cable into the LAN Port:

Insert the Ethernet cable into LAN port on the back panel of the 3G25W-R, and an available Ethernet port on the network adapter on the computer you will use to configure the 3G25W-R. Step 4: Power on the 3G25W-R:

1. Connect the power adapter to the receptor on the back panel of your 3G25W-R. 2. Then plug the other end of the power adapter into a wall outlet or power strip. 3. Turn on the Power Switch. Step 5: Complete the setup. 1. All LEDs will flash to indicate power has been applied. 2. The LEDs will flash ON and OFF as the 3G25W-R performs its startup initialisation and Internet connection processes. This will take a few minutes. 3. When complete, the Status LED will flash. SettingupyourPC Having physically connected your 3G25W-R, the next step is to configure the router to establish a broadband connection. Depending on your computers current settings you may first need to reconfigure the TCP/IP (Network Settings) to access your Wireless Router. Follow the instructions for your operating system. ForWindows98SE/ME/2000/XP 1. Click on Start -> Control Panel (in Classic View). In the Control Panel; double click on Network Connections to continue. 2. Single RIGHT click on Local Area connection, then click Properties. 3. Double click on Internet Protocol (TCP/IP). 4. Check Obtain an IP address automatically and Obtain DNS server address automatically then click on OK to continue 5. Click Show icon in notification area when connected (see screen image in 3. above) then click on OK to complete the setup procedures. ForWindowsVista32/64 1. Click on Start -> Control Panel -> Network and Sharing Center. 2. In the Manage network connections, click on Manage network connections to continue. 3. Single RIGHT click on Local Area connection, then click Properties. 4. The screen will display the information User Account Control and click Continue to continue. 5. Double click on Internet Protocol Version 4 (TCP/IPv4). 6. Check Obtain an IP address automatically and Obtain DNS server address automatically then click on OK to continue. ForWindows732/64 1. Click on Start -> Control Panel (in Category View) -> View network status and tasks. 2. In the Control Panel Home, click on Change adapter settings to continue. 3. Single RIGHT click on Local Area Connection, then click Properties. 4. Double click on Internet Protocol Version 4 (TCP/IPv4). 5. Check Obtain an IP address automatically and Obtain DNS server address automatically then click on OK to continue. ForMacOSX10.6 1. Click the Apple icon and choose System Preferences. 2. Click on Network icon. 3. Set Location to Automatic and Show to Built-In Ethernet. 4. In the Configure option, choose Using DHCP. 5. Click on Apply Now. Web Configuration Wizard Having physically connected your 3G25W-R, the next step is to establish the broadband connection to the internet. Please follow the steps below to configure your 3G25W-R Wireless router via the web configuration wizard utility. 1. Open your web browser (e.g. Internet Explorer/Firefox/Safari) and navigate to http://192.168.1.1/

2. At the login screen, type in admin (without quotes) in the System Password field. Then click on Login. Notes: admin is the default login password for the unit. 3. Click on Wizard and then on Enter. 4. This page shows you the steps needed to configure your 3G25W-R unit. Click Next to continue. 1. 2. 5. After choosing 3G, you need to enter the information below, this will have been provided to you by your 3G broadband service provider. Click Apply Setting once you finished. After several minutes the 3G25W-R will save all the settings and the wizard is 6. complete. Click Finish to go back to the Status page and the unit will now use the new settings. 7. System Status page will show that your 3G service is online and the WAN IP address that has been assigned. If everything is configured properly, the Advanced Setup To access the Advanced Setup option of your 3G25W-R, you need to access the 3G25W-Rs web configuration outlined in the Web configuration section and click on the Advanced Setup menu at the top of the page. For first time installation, you will be presented with the following page. Choose Advanced to access the Advanced Setup page. After that, click on any of the top menu to access the respective setting pages. BasicSetting The Basic Setting page allows you to configure a number of basic settings on the unit. This section deals with these features. Click on any of the menu on the left to configure the respective setting page. BasicSetting>NetworkSetup This Page allows you to change the LAN (Local Area Network) settings on your 3G25W-R Wireless router and the WAN (Wide Area Network) connection. 1. LAN IP Address: the local IP address of the 3G25W-R. The computers on your network must use this IP address as their Default Gateway. You can change it if necessary. 2. Subnet Mask: Enter 255.255.255.0 in the subnet field. 3. WAN Interface: Select Ethernet WAN or Wireless WAN. 4. WAN Type: WAN connection type. Click the WAN Type pulldown menu to choose the appropriate connection type from the following options:

- Static IP Address Enter the WAN IP Address, Subnet Mask, Gateway, Primary and Secondary DNS as supplied by your ISP.

- Dynamic IP Address packets. Activate WWAN for Auto-Failover: The WAN type will be change to wireless-WAN automatically if the wired-WAN connection disconnects. Host Name: Set the hostname for your connection (optional - Refer to your ISP for more information). ISP register MAC address: You can change the WAN port MAC address if needed to clone your 3G modem (optional - Refer to your ISP for more information). Connection Control: There are 3 modes to select :-

Connect-on-demand: The 3G25W-R will connect to the internet when a client sends outgoing the connection is manually disconnected. Auto Reconnect (Always-on): The 3G25W-R will automatically reconnect to the internet until button in the Status-page. Manually: The 3G25W-R will not connect to the internet until someone clicks the connect NAT disable: This option disables "Network Address Translation" for this connection type.

- PPP over Ethernet Activate WWAN for Auto-Failover: The WAN type will be change to wireless-WAN automatically if the wired-WAN connection disconnects. PPPoE Account and Password: The account and password your ISP assigned to you. For security, this field appears blank. If you don't want to change the password, leave it empty. Primary DNS/Secondary DNS: This feature allows you to manually assign a Primary/Secondary DNS Server (Refer to your ISP for more information). Connection Control: There are 3 modes to select :-

outgoing packets. Connect-on-demand: The 3G25W-R will connect to the internet when a client sends internet until the connection is manually disconnected. Auto Reconnect (Always-on): The 3G25W-R will automatically reconnect to the connect button in the Status-page. Manually: The 3G25W-R will not connect to the internet until someone clicks the Maximum Idle Time: The amount of inactivity on the internet connection before it is disconnected. Set it to zero or enable Auto-reconnect to disable this feature. PPPoE Service Name: Enter the service name if your ISP requires it (optional). Assigned IP address: Enter the IP address assigned to your service. This is usually left blank. Maximum Transmission Unit (MTU): The default MTU value is 0(auto). It is set automatically when you connect. NAT disable: This option disables "Network Address Translation" for this connection type.

- PPTP Please verify your connection type and select the appropriate IP Mode - Static IP Address or Dynamic IP Address. If you are using a Static address enter the information provided to you by your service provider. Activate WWAN for Auto-Failover: The WAN type will be change to wireless-WAN automatically if the wired-WAN connection disconnects. My IP Address, My Subnet Mask and WAN Gateway IP: the private IP address, subnet mask and Gateway IP your service provider assigned to you. Server IP Address/Name: the IP address or URL of the PPTP server. PPTP Account and Password: The account and password your PPTP provider assigned to you. If you don't want to change the password, keep it empty. Connection ID: Enter your connection ID if required. Maximum Idle Time: The amount of inactivity on the internet connection before it is disconnected. Set it to zero or enable Auto-reconnect to disable this feature. Connection Control: There are 3 modes to select :-

outgoing packets. Connect-on-demand: The 3G25W-R will connect to the internet when a client sends internet until the connection is manually disconnected. Auto Reconnect (Always-on): The 3G25W-R will automatically reconnect to the connect button in the Status-page. Manually: The 3G25W-R will not connect to the internet until someone clicks the Maximum Transmission Unit (MTU): The default MTU value is 0(auto). It is set automatically when you connect.

- L2TP Please verify your connection type and select the appropriate IP Mode - Static IP Address or Dynamic IP Address. If you are using a Static address enter the information provided to your by your service provider. Activate WWAN for Auto-Failover: The WAN type will be change to wireless-WAN automatically if the wired-WAN connection disconnects. IP Address, Subnet Mask and WAN Gateway IP: the private IP address, subnet mask and Gateway IP your service provider assigned to you. Server IP Address/Name: The IP address or URL of the L2TP server. L2TP Account and Password: The account and password your L2TP provider assigned to you. If you don't want to change the password, keep it empty. Maximum Idle Time: The amount of inactivity on the internet connection before it is disconnected. Set it to zero or enable Auto-reconnect to disable this feature. Connection Control: There are 3 modes to select :-

outgoing packets. Connect-on-demand: The 3G25W-R will connect to the internet when a client sends internet until the connection is manually disconnected. Auto Reconnect (Always-on): The 3G25W-R will automatically reconnect to the button in the Status-page. Manually: The 3G25W-R will not connect to the internet until someone clicks the connect Maximum Transmission Unit (MTU): The default MTU value is 0(auto). It is set automatically when you connect.

- 3G Please note: The WAN fields may not be necessary for your 3G connection. The information on this page will only be used when required by your 3G service provider. Please contact your 3G provider to obtain this information if needed. Dial-Up Profile: Select auto or manual to continue. Country: select your country. Telecom: select your 3G provider. 3G Network: select the 3G Network type. APN: Enter the APN for your 3G service. Pin Code: Enter the Pin Code for your SIM card. Dial-Number: This number required to connect to your 3G service. Account: The username provided by your 3G service provider to enable access to your 3G service. Password: The password provided by your 3G service provider to enable access to your 3G service. Authentication: Choose the appropriate authentication type for your 3G service. Primary DNS: Manually assign a Primary DNS Server. Secondary DNS: Manually assign a Secondary DNS Server. Connection Control: There are 3 modes to select :-

outgoing packets. Connect-on-demand: The 3G25W-R will connect to the internet when a client sends internet until the connection is manually disconnected. Auto Reconnect (Always-on): The 3G25W-R will automatically reconnect to the connect button in the Status-page. Manually: The 3G25W-R will not connect to the internet until someone clicks the Keep Alive: Enables the 3G25W-R to maintain your internet connection. BasicSetting>DHCPServer DHCP Server: Enable or disable the DHCP server. Lease Time: Length of the DHCP lease time IP Pool Starting/Ending Address: Whenever there is a request, the DHCP server will automatically allocate 1. 2. 3. an unused IP address from the IP address pool to the requesting computer. You must specify the starting / ending address of the IP address pool 4. Click Save to save these settings or Undo to cancel. You can also check the DHCP client list by pressing the Client List button. Fixed Mapping button allows you to map a specific IP address to a specific MAC address. Press More for more options, Domain Name: Optional, this information will be passed to the client DHCPClientsList The list of DHCP clients is shown here. DHCPFixedMapping The DHCP Server will reserve a specific IP for a specific MAC address, shown below. BasicSetting>Wireless This page allows you to configure the wireless network features of the router. The Wireless settings page allows you to set the wireless configuration items. 1. Network ID (SSID): Network ID is used for identifying the Wireless LAN (WLAN). Client stations can roam freely over this product and other Access Points that have the same Network ID. (The factory default setting is 3G25W-R) SSID Broadcast: The router will broadcast the SSID so that wireless clients can find the wireless network. Channel: The wireless radio channel in use by your network. Wireless Mode: Choose B/G Mixed, B only, G only, and N only, G/N Mixed or B/G/N mixed. The factory default setting is B/G/N mixed. Authentication mode: You may select from seven kinds of authentication to secure your wireless network:

Open, Shared, Auto, WPA-PSK, WPA2-PSK, and WPA-PSK/WPA2-PSK. 2. 3. 4. 5. WPA-PSK/WPA2-PSK - A newer type of security is WPA-PSK-TKIP and WPA-PSK2-ADE. This type of security gives a more secure network compare to WEP. Use TKIP Encryption Type for WPA-PSK and AES for WPA2-PSK. Please enter the key in the Passphrase field. The key needs to be more then 8 characters and less then 63 characters and it can be any combination of letters and numbers. The factory default setting is: a1b2c3d4e5 Please note that the configuration for WPA-PSK and WPA2-PSK is identical After configuring wireless security, you also need to configure your wireless adapter to use the same Notes:

security settings before you can connect wirelessly. Not all wireless adapter supports WPA-PSK/WPA2-

PSK/WPA/WPA2 security, please refer to your wireless adapter user guide for more details. It is strongly recommended to set up wireless security such as WPA-PSK (when the wireless client supports WPA) in order to secure your network. Click Save to save these settings or click Undo to cancel. WDS(WirelessDistributionSystem) WDS operation as defined by the IEEE802.11 standard has been made available. Using WDS it is possible to wirelessly connect Access Points, and in doing so extend a wired infrastructure to locations where cabling is not possible or inefficient to implement. WPSSetup WPS is a Wi-Fi Protection Setup which is similar to WCN-NET and offers safe and easy way to connect Wirelessly. WirelessClientList The list of wireless clients is shown here. BasicSetting>ChangePassword On this page you can change the 3G25W-R web configuration password. Please type in your old password

(the factory default password is admin) and then type in the new password. Type the same new password in the Reconfirm field. Note:

if you change the password, please make sure that you use the new password the next time you log into the web configuration. Click Save to save the settings or Undo to cancel. ForwardingRules The Forwarding Rules page allows you to configure the port forwarding management on the router. Click on any of the menu items on the left to access the respective settings page. Forwarding rules are a necessary feature as by default NAT (Network Address Translation) will automatically block incoming traffic from the Internet to the LAN unless a specific port mapping exists in the NAT translation table. Because of this, NAT provides a level of protection for computers that are connected to your LAN. However, this also creates a connectivity problem when you want to make LAN resources available to Internet clients, which you may want to do to play network games or host network applications. There are three ways to work around NAT and to enable certain LAN resources available from the Internet; Port Forwarding (in the Virtual Server page), Port Triggering (in the Special AP page) and DMZ Host (in the Miscellaneous page). ForwardingRules>VirtualServer A virtual server is defined as a Service Port, and all requests to this port will be redirected to the computer specified by the Server IP. Virtual Servers can also work with Scheduling Rules, and give you more flexibility on Access control. For detail instructions on scheduling rules, please refer to Advanced Setting > Scheduling. For example, if you have an FTP server (default port is port 21) at 192.168.1.10, a Web server (default port is port 80) at 192.168.1.20, and a VPN server (default port is port 1723) at 192.168.1.60, then you need to specify the following virtual server mapping table:

Service.Port 21 80 1723 Note:

Click Save to save the settings or Undo to cancel. Server.IP 192.168.1.10 192.168.1.20 192.168.1.60 At any given time, only one IP address can bind to a particular Service Port. Enable Ticked Ticked Ticked ForwardingRules>SpecialAP Some applications like On-line games, Video conferencing and Internet telephony require multiple connections to the internet. Because of that, these applications cannot work with a pure NAT router such as the 3G25W-R. The Special Applications feature allows some of these applications to work with this router. If this fails to make the application work, try to set up that computer as the DMZ host instead. Please refer to Forwarding Rules >

Miscellaneous section for assistance doing this. The fields are explained as follow:

1. Trigger: the outbound port number that will be triggered by the application.. 2. Incoming Ports: when the trigger packet is detected, the inbound packets sent to the specified port numbers will be allowed to pass through the firewall. The 3G32VW also provides predefined settings for some popular applications. To use the predefined settings, select your application from the Popular application list, select an unused ID from the list and then click Copy to. After that the predefined settings will be added to the list. Click Save to save the settings or Undo to cancel. ForwardingRules>Miscellaneous DMZ (Demilitarized Zone) Host is a computer without the protection of firewall. It allows that particular computer to be exposed to unrestricted 2-way communication to the internet. It is mostly used for Internet games, Video conferencing, Internet telephony and other special applications. To enable DMZ, enter the IP address of the PC and tick on Enable. Note:

UPnP Setting, The device also supports this function. If the OS supports this function enable it. Click Save to save the settings or Undo to cancel. This feature should be used only when necessary. 3GT2WN SecuritySetting The Security Setting page allows you to configure the security management on the router such as Packet filters and MAC Control. Click on any of the menu items on the left to access the respective setting page. SecuritySetting>PacketFilters The Packet Filter enables you to control what packets are allowed to pass through the router. There are two types of packet filter, Outbound Packet Filter which applies to all outbound packets and Inbound Packet Filter which only applies to packets that are destined for a Virtual Server or DMZ host only. To enable an Outbound Filter, please make sure to tick the Enable tick box on the top of the page. There are two type of filtering policies:

1. Allow all data traffic to pass except those that match the specified rules. 2. Deny all data traffic to pass except those that match the specified rules. For each direction, you can specify up to 48 rules. For each rule you will need to define the following:

Source IP address Source port Destination IP address Destination port Protocol: TCP or UDP or both. Use Schedule Rule#

For source or destination IP address, you can define a single IP address (192.168.1.1) or a range of IP addresses (192.168.1.100-192.168.1.200). Empty fields imply all IP addresses. For source or destination port, you can also define a single port (80) or a range of ports (1000-1999). Use the prefix T or U to specify either the TCP or UDP protocol e.g. T80, U53, U2000-2999. No prefix indicates both TCP and UDP are defined. An empty field implies all ports. The Packet Filter also works with Scheduling Rules, and gives you more flexibility on Access control. For detailed instructions regarding scheduling rules, please refer to the Advanced Setting > Scheduling section. Click Save to save the settings or Undo to cancel. InboundFilter:

To access the Inbound Packet Filter page, click on the Inbound Filter button on the bottom of the Outbound Filter page. All the settings on this page are similar to the one for the Outbound Filter. Click Save to save the settings or Undo to cancel. SecuritySetting>DomainFilters Domain Filters enable you to prevent users from accessing specific domain addresses. To enable the Domain Filter please make sure to tick the Enable tick box on the top of the page. Log DNS Query. Please tick the Enable tick box if you want to log when someone accesses specific URLs. Privilege Host/Netmask. To set a group of computer that has privilege to access the internet without any restriction. To set a Domain Filter, you need to specify the following:

Domain Suffix: Please type the suffix of the URL that needs to be restricted. For example, .com, xxx. com. Action: The router action that you want when someone is accessing a URL that met the domain suffix. Tick on Drop to block the access and/or tick on Log to log this access. Enable. Tick to enable the rule. Click Save to save the settings or Undo to cancel. SecuritySetting>URLBlocking URL Blocking will block LAN computers from connecting to a pre-defined website. The major difference between Domain Filter and URL Blocking is that Domain Filter require users to input a suffix (e.g. xxx.com, yyy.net) while URL Blocking only requires you to input a keyword. To enable URL Blocking please make sure to tick on Enable tick box on the top of the page. To set a URL Blocking rule, you need to specify the following:

URL. If any part of the Websites URL matches the pre-defined word then the connection will be blocked. For example, you can use pre-defined word sex to block all websites if their URLs contain the pre- defined word sex. Enable. Tick to enable the rule. Click Save to save the settings or Undo to cancel. SecuritySetting>MACControl MAC Control allows you to assign different access rights for different users and to assign a specific IP address to a specific MAC address. To enable MAC Address Control please make sure to tick the Enable tick box on the top of the page. Two types of control are available:

Connection control. Check Connection Control to control which clients (wired and wireless) can connect to the unit. If a client is denied to connect to this device, it means the client can not access to the Internet either. Choose allow or deny to allow or deny clients with MAC addresses that are not in the list to connect to this device. Association control. Check Association Control to control which wireless client can associate with the unit. If a client is denied to associate with the unit, it means the client can not send or receive any data via this device. Choose allow or deny to allow or deny the clients with MAC addresses that are not in the list to associate to the wireless LAN Click the Next Page or the Previous Page buttons to see the entire list. Click Save to save the settings or Undo to cancel. SecuritySetting>Miscellaneous This page allows you to change various miscellaneous security settings on the unit. Administrator Time-out The period of time with no activity in the web configuration page to logout automatically, you may set it to zero to disable this feature. Remote Administrator Host/Port In general, only Intranet users can browse the built-in web pages to perform administration task. This feature enables you to perform administration tasks from a remote host. If this feature is enabled, only the specified IP address can perform remote administration. If the specified IP address is 0.0.0.0, any host can connect to the router to perform administration tasks. You can use subnet mask bit (/nn) notation to specify a group of trusted IP addresses for example, "10.1.2.0/24". NOTE: When Remote Administration is enabled, the web server port will be shifted to 80. You can also change the web server port. Discard PING from WAN side When this feature is enabled, your router will not respond to ping requests from remote hosts. DoS Attack Detection When this feature is enabled, the router will detect and log where the DoS attack comes from on the Internet. Currently, the router can detect the following DoS attack types: SYN Attack, WinNuke, Port Scan, Ping of Death and Land Attack, as well as others. Click Save to save the settings or Undo to cancel. AdvancedSetting The Advanced Setting page allows you to configure the advanced settings on the router such as the System log, Dynamic DNS and SNMP options. Click on any of the menu items on the left to configure the access the respective setting page. AdvancedSetting>SystemLog This enables you to set up the system log features of the router. You can also choose to export the system log via email (SMTP) or send it to a remote syslog server (UDP). IP Address for Syslogd Host IP of destination where sys log will be sent to. Check Enable to enable this function. Setting of Email alert Check if you want to enable Email alert (send syslog via email). Check Enable to enable this function. SMTP Server IP and Port Input the SMTP server IP and port, which are connected with ':'. If you do not specify port number, the default value is 25.For example, "mail.your_url.com" or "192.168.1.100:26". SMTP Username and password Input a user account and password for the SMTP server. E-mail address The recipients who will receive these logs, you can assign more than 1 recipient, using ';' or ',' to separate these email addresses. E-mail Subject The subject of email alert, this setting is optional. View Log View the current system log. AdvancedSetting>DynamicDNS The Dynamic DNS feature enables users to have a static domain name for their internet connection even when their internet connection IP address is dynamic. By mapping the host name to the current public IP address of the router, users who want to connect to the router or any services behind the router from the internet can just use the Dynamic DNS hostname instead of the IP Address which might change every time the router connects to the Internet. Before you can use Dynamic DNS service, you need to register an account on one of the many supported Dynamic DNS provider such as DynDNS.org, TZO.com or dhs.org. After registering the account, the Dynamic DNS provider will provide you with the following details:

Host Name Username/Email Password/Key. To enable the Dynamic DNS feature on the unit, click the Enable check box, choose the respective Provider and enter the details from your provider. Click Save to save the settings or Undo to cancel. AdvancedSetting>QOS QoS (Quality of Service) provides different priority to different users or data flows, or guarantees a certain level of performance. QoS Control: This Item enables QoS function or not. Bandwidth of Upstream: Set the limitation of upstream speed. Local IP: Ports Define the Local IP address and port to apply QoS to. Remote IP: Ports Define the Remote IP address and port to apply QoS to. QoS Priority: This defines the priority level of the current Policy Configuration. Packets associated with this policy will be serviced based upon the priority level set. For critical applications High or Normal levels are recommended. For non-critical applications select a Low level. User Rule#: The QoS rules can work in conjunction with Scheduling Rules. Please reference the section Advanced setting/schedule Rule section. Click on Save to store your setting or Undo to discard your changes. AdvancedSetting>SNMP SNMP (Simple Network Management Protocol) is a protocol designed to give a user the capability to remotely manage a computer network by polling and setting terminal values and monitoring network events. Enable SNMP: You must check Local, Remote or both to enable SNMP function. If Local is checked, this device will only respond to requests from LAN connected hosts. If Remote is checked, this device will respond to requests from the WAN connection. Get Community: Sets the community string your device will respond to for Read-Only access. Set Community: Sets the community string your device will respond to for Read/Write access. IP 1, IP 2, IP 3, IP 4: Input your SNMP Management host IP here. You will need to configure the address where the device should send SNMP Trap messages to. SNMP Version: Please select proper SNMP Version that your SNMP Management software supports. WAN Access IP Address: You can limit remote access to a specific IP address by entering it here. Please note: If "Remote" access is enabled, the default setting of 0.0.0.0 means any IP obtain SNMP protocol information. Click on Save to store your setting or Undo to discard your changes. AdvancedSetting>Routing Routing tables allow you to determine which physical interface address to use for outgoing IP data. If you have more than one router and subnet, you will need to configure the routing table to allow packets to find the proper routing path and allow different subnets to communicate with each other. These settings are used to setup the static and dynamic routing features of the 3G25W-R. Dynamic Routing:

Routing Information Protocol (RIP) will exchange information about different host destinations for working out routes throughout the network. Please only select RIPv2 if you have a different subnet in your network. Otherwise, please select RIPv1. Static Routing:

For static routing, you can specify up to 8 routing rules. You need to enter the destination IP address, subnet mask, gateway, hop for each routing rule, and then enable the rule by clicking the Enable checkbox. Click on Save to store your setting or Undo to discard your changes. AdvancedSetting>SystemTime This page allows you to change the System time setting on the 3G25W-R. Time Zone Select the time zone where this device is located. Auto-Synchronization Select the Enable checkbox to enable this function. Time Server Select a NTP time server to obtain the current UTC time from Sync with Time Server Select if you want to set Date and Time by NTP Protocol. Sync with my PC Select if you want to set Date and Time using your computers Date and Time Click Save to save the settings or Undo to cancel. AdvancedSetting>Scheduling You can use scheduling to enable or disable a service at a specific time or on a specific day. Select Enable and then click the New Add button. Select a name for the rule and enter the details such as the day, start time or end time. Click Save to save the settings or Undo to cancel. ToolBox The Tool Box page consists of various tools for the unit. Click on any of the menu items on the left to access the respective page. ToolBox>SystemInfo From this page you can view the System log and the Routing Table information for the router. ToolBox>FirmwareUpgrade You can upgrade the routers firmware by clicking the Upgrade button ToolBox>BackupSetting You can backup your current settings by clicking the Backup Setting button then and save it as a bin file. When you want to restore these settings, click the Firmware Upgrade button and use the bin file you saved. ToolBox>ResettoDefault ToolBox>Reboot AppendixA:WANFailover The WAN failover feature of the 3G25W-R is designed to provide a backup WAN connection in case your primary connection should fail. To use this feature, you will require both a regular WAN connection and a 3G WAN connection. Please follow these steps to set up WAN failover on your 3G25W-R. 1. Set up a primary (non-3G) WAN connection by following the steps outlined in the Basic Setting > Primary Setup section of the User Guide. 2. Set up a secondary (3G) WAN connection by following the steps outlined in the Basic Setting > Primary Setup section of the User Guide. 3. Open your web browser (e.g. Internet Explorer/Firefox/Safari) and navigate to http://192.168.1.1/. 4. At the login screen, type in admin (without quotes) in the System Password field. Then click on Login. 5. Navigate to the Basic Setting > Primary Setup page. Select the Activate WWAN for Auto-Failover checkbox and enter a public IP address (for example www.google.com) into the remote host for keep alive box. The 3G25W-R will periodically check that it can connect to this address to determine if the WAN connection is still running. 6. In Basic Setting > Primary Setup, make sure that the selected WAN Type is your primary (non-3G) WAN connection and click Save. You are now ready to use the internet connection as normal. 7. When your primary (non-3G) WAN connection fails, the 3G25W-R will automatically failover to the secondary (3G) WAN connection. Please allow up to 2 minutes for this change to occur. 8. When your primary (non-3G) WAN connection reconnects, the 3G25W-R will automatically revert to this connection. Please allow up to 2 minutes for this change to occur. 9. To confirm that the process in Step 8 is complete, refresh the status page of the web interface after 1 minute. AppendixB:EstablishingyourWirelessConnection WindowsXPservicepack2 1. Open Network Connections (Start -> Control Panel -> Network Connections):

2. Right-click on your Wireless Network Connection and select View Available Wireless Networks:

3. Select the wireless network you want to connect to and click Connect:

4. Enter the network key (a1b2b3d4e5) and click Connect:

5. The connection will show Connected. WindowsVista 1. Open Network and Sharing Center (Start > Control Panel > Network and Sharing center). 2. Click on Connect to a network. 3. Choose Connect to the Internet and click on Next. 4. Choose NetComm n3G Series. 5. Click on the wireless network name and click Connect. 6. Click on Display Characters and type in the network key. Then Click Next. 7. Select the appropriate location. This will affect the firewall settings on the computer. 8. Click on both Save this network and Start this connection automatically and click Next. Windows7 Follow these steps:

1. Open Network and Sharing Center (Start > Control Panel > Network and Sharing center). 2. Click on "Change Adapter settings" on the left-hand side. 3. Right-click on "Wireless Network Connection" and select "Connect / Disconnect". 4. You should see a network listed with the SSID of your 3G25W-R. Select your wireless network and click Connect. 5. Type the following into the Security key section: a1b2c3d4e5 and click "OK". 6. You may then see a window that asks you to "Select a location for the 'wireless' network". Please select the "Home" location. 7. You may then see a window prompting you to setup a HomeGroup. Click Cancel on this. 8. You can verify your wireless connection by clicking the Wireless Signal indicator in your system tray. After clicking on this, you should see an entry matching the SSID of your 3G25W-R with Connected next to it. MacOSX10.6 Follow these steps:

1. Click on the Airport icon on the top right menu. 2. Click on the network name that you want to connect. 3. On the new window, tick on Show Password and type in the network key in the Password field. Click on OK. 4. To check the connection, click on the Airport icon and there should be a tick on the wireless name. Notes:Forotheroperatingsystem(Windows98SE,WindowsME,Windows2000etc)orifyouusethewireless adaptorutilitytoconfigureyourwirelessconnection,pleaseconsultthewirelessadapterdocumentationfor additionalinformation. AppendixC:Troubleshooting UsingLEDstoDiagnoseProblems The LEDs are useful aides for finding possible problem causes. Power LED The Power LED does not light up. Step Correct Action 1 2 3 4 Make sure that the 3G25W-R power adaptor is connected to the device and plugged in to an appropriate power source. Use only the supplied power adaptor. Check that the 3G25W-R and the power source are both turned on and device is receiving sufficient power. Turn the 3G25W-R off and on. If the error persists, you may have a hardware problem. In this case, you should contact your vendor. WebConfiguration I cannot access the web configuration. STEPS CORRECTIVE ACTION Step Correct Action Make sure you are using the correct IP address of the 3G25W-R. Check the IP address of the device. Check that you have enabled web service access. If you have configured a secured client IP address, your computers IP address must match it. Your computers and the 3G25W-Rs IP addresses must be on the same subnet for LAN access. If you changed the devices WLAN IP address, then enter the new one as the URL. 1 2 3 4 S The web configuration does not display properly. Step 1 Correct Action Delete the temporary web files and log in again. In Internet Explorer, click Tools, Internet Options and then click the Delete Files ... button. When a Delete Files window displays, select Delete all offline content and click OK. (Steps may vary depending on the version of your Internet browser.) CORRECTIVE ACTION LoginUsernameandPassword I forgot my login username and/or password. S Step 1 2 3 4 Correct Action If you have changed the password and have now forgotten it, you will need to upload the default configuration file. This will erase all custom configurations and restore all of the factory defaults including the password. Press the Reset button for ten seconds, and then release it. When the LINK LED begins to blink, the defaults have been restored and the 3G25W-R restarts. The default username is admin. The default password is admin. The Password and Username fields are case-

sensitive. Make sure that you enter the correct password and username using the proper casing. It is highly recommended to change the default username and password. Make sure you store the username and password in a save place. S CORRECTIVE ACTION WLANInterface I cannot access the 3G25W-R from the WLAN or ping any computer on the WLAN. Step 1 2 Correct Action Check the WiFi LEDs on top of the unit Make sure that the IP address and the subnet mask of the NB14WN and your computer(s) are on the same subnet. TE CORRECTIVE ACTION InternetAccess I cannot access the Internet. STEPS COR Step 1 2 RECTIVE ACTION Correct Action Make sure the 3G25W-R is turned on and connected to the network. Verify your 3G settings Internetconnectiondisconnects. S Step 1 2 TEPS CORRECTIVE ACTION Correct Action Check the schedule rules. Contact your 3G SIM provider LegalandRegulatoryInformation FCC Statement:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution:

Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. 2. This device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation. Important Note:

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. The transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Industry Canada RF exposure requirements In order to ensure compliance with the RF exposure requirements specified in Health Canada Safety Code 6, this device may be operated while held in the hand, but not when held close to the body, carried in a pocket or holster, or similar configuration that allows close proximity to the body. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT. ThisdevicecomplieswithIndustryCanadalicenceexemptRSSstandard(s). Operationissubjecttothefollowingtwoconditions:

(1)thisdevicemaynotcauseinterference

(2)thisdevicemustacceptanyinterference,includinginterferencethatmaycauseundesiredoperationofthedevice. This Class [ B ] digital apparatus complies with Canadian ICES-003. This device has been designed to operate with the antennas listed below, and having a maximum gain of [ 4 ]dB. Antennas not included in this list or having a gain greater than [ 4 ]dB are strictly prohibited for use with this device. The required antenna impedance is [ 50 ] ohms. This product includes copyrighted third-party software licensed under the terms of the GNU General Public License. Please refer to the GNU General Public License below to check the detailed terms of this license. The following parts of this product are subject to the GNU GPL, and those software packages are copyright by their respective authors. Linux-2.6.21 system kernel busybox_1_00_rc2 bridge-utils 0.9.5 dhcpcd-1.3 ISC DHCP V2 P5 syslogd spread from busybox wireless tools ntpclient of NTP client implementation GNU Wget Availability of source code Please visit our web site or contact us to obtain more information. GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundation's software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Library General Public License instead.) You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things. To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it. For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights. We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software. Also, for each author's protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors' reputations. Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone's free use or not licensed at all. The precise terms and conditions for copying, distribution and modification follow. GNU GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The "Program", below, refers to any such program or work, and a "work based on the Program" means either the Program or any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into another language. (Hereinafter, translation is included without limitation in the term

"modification".) Each licensee is addressed as "you". Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program). Whether that is true depends on what the Program does. 1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions:

of any change. You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License. running for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the distribution of the whole must be You must cause the modified files to carry prominent notices stating that you changed the files and the date If the modified program normally reads commands interactively when run, you must cause it, when started on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Program. In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. Accompany it with the information you received as to the offer to distribute corresponding source code. Accompany it with the complete corresponding machine-readable source code, which must be distributed 3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following:

under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,

(This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.) The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code. 4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. 5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it. 6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License. 7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Program at all. For example, if a patent license would not permit royalty-

free redistribution of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. 9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation. 10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS"

WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. END OF TERMS AND CONDITIONS