90-Day Limited Warranty In the unlikely event that this product is defective, or does not perform properly, you may return it to the authorized service center for repair or exchange within ninety (90) days from your original date of purchase. TO OBTAIN WARRANTY SERVICE:
Go to our website portal to receive an SRO number.
+ Provide proof of the date of purchase within the package (dated bill of sale).
* Prepay all shipping costs to the authorized service center, and remember to insure your return. Include a return shipping address (no P.O. Boxes), a telephone contact number, and the defective unit within the package.
* Describe the defect or reason you are returning the product. Your product will be repaired or replaced, at our option, for the same or similar model of equal value if examination by the service center determines this product is defective. Products received damaged as a result of shipping will require you to file a claim with the carrier. The shipping address of the authorized service center is:
<3 Customer Service Dept. 36 c/o Southern Telecom 400 Kennedy Drive Sayreville NJ 08872 Should have any questions or problems concerning this product, please visit our website at SouthernTelecom.com and click on Product Support. Warranty Service Not Provided This warranty does not cover damage resulting from accident, misuse, abuse, improper installation or operation, lack of reasonable care, and unauthorized modification. This warranty is voided in the event any unauthorized person opens, alters or repairs this product. All products being returned to the authorized service center for repair must be suitably packaged. Limitation of Warranty THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS PRODUCT. ALL OTHER WARRANTIES, EXPRESS OR IMPLIED (INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE) ARE HEREBY DISCLAIMED. NO VERBAL OR WRITTEN INFORMATION GIVEN BY AIT, INC. ITS AGENTS, OR EMPLOYEES SHALL CREATE A GUARANTY OR IN ANY WAY INCREASE THE SCOPE OF THIS WARRANTY.
+ REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AIT, INC, SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. THIS DISCLAIMER OF WARRANTIES AND LIMITED WARRANTY ARE GOVERNED BY THE LAWS OF THE STATE OF NEW YORK. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTIBILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED TO THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE. Some states do not allow the exclusion nor limitation of incidental or consequential damages, or limations on how long an implied warranty lasts so the above limitations on exclusions may not apply to you. This warranty gives you specific legal rights, and you also may have other rights that vary from state to state. Printed in China v1.07/2018
@) brilliant
= IDEAS Bluetooth Smart Bulb User Guide BIWL475 Before You Begin... WARNING
+ THIS IS NOT A TOY Keep out of reach of children and pets
+ For indoor use ONLY
+ Keep away from water/sunlight
+ Fragile - handle with care In the Box BIWL475 - Bluetooth Smart Bulb (x1) User Manual (x1) CCR uy
. AppStore GETITON
| Colle Ay Downloading the App 1. Search for the MG Lighting by Sharper Image app on the Google Play Store or Apple App Store. 2. Download and install the app. 3. Open the MG Lighting app and grant any requested permissions to properly operate. MG Lighting by Sharper Image Android 4.3+
iOS 6.0+
Note: Your mobile device must support Bluetooth 4.0+. Bluetooth version 4.2 can support up to seven light bulbs, Bluetooth versions below 4.2 can support up to four light bulbs. Question & Customer Support For further assistance or any questions, please visit our website at SouthernTelecom.com and click on Product Support Getting Started Setting Up the Bulb 1. Carefully remove the BIWL475 from its packaging and inspect for any damage. If the bulb is damaged please dispose of it immediately. 2. Turn off the power to the light fixture you are installing the bulb to (unplug the light fixture if possible). Screw the bulb into a standard size E26 light bulb socket. 3. Power the light on. Connecting the Bulb 1. Make sure the bulb is properly set up (as detailed above) and the MG Lighting app is properly downloaded and installed to your mobile device (as detailed on the previous page). 2. Open the MG Lighting app on your mobile device. 3. Follow the instructions on screen to connect the bulb. Legal Information READ CAREFULLY AND KEEP THIS MANUAL FCC Information Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
+ Reorient or relocate the receiving antenna.
+ Increase the separation between the equipment and receiver.
+ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
+ Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. Ag@zicas A ioe a CAUTION:
GONSULT OWNER'S MANUAL BEFORE INSTALLATION The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that
() may be of sufficient magnitude to constitute a risk of electric shock to the persons, The exclamation point within an equilateral triangle Is Intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance, 1. Read and keep these instructions. Heed all warnings. 2. Follow all instructions. 3. Do not use this apparatus near water. 4, Clean only with a dry cloth. 5. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 6. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 7.Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 8. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 9, Only use attachments/accessories specified by the manufacturer. 10. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination during lightning storms or when unused for long periods of time. 11. Unplug the apparatus during lightning storms or when unused for long periods of time. 12. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged; liquid has been spilled or objects have fallen into the apparatus; the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 13. WARNING; The mains plug is used as a disconnect device; the disconnect device shall remain readily operable. 14. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing, and objects filled with liquids, such as vases, shall not be placed on apparatus.