FCC ID: 2A3SV-LD-W102 WIRELESS CHARGING STAND

WIRELESS CHARGING STAND 1 2 W101 USB Type-A Micro-B Type-C 20W and above power adapter

4 45 65mm 120mm 1m 110mm 110mm FCC Information TThis device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

--Reorient or relocate the receiving antenna.

--Increase the separation between the equipment and receiver.

--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

--Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Radiation Exposure Statement This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected. 5 CAUTION Do not use the device in a humid environment to prevent liquid from owing into the device. Do not use in the environment of strong magnetic eld;

Do not use in high temperature environment;

Please use indoors;

Children must be used under adult supervision;

Problems arising from misuse, disassembly or modication are not covered by this warranty.

RECYCLE Advise customers to dispose of discarded wireless charging brackets and other equipment in an environmentally friendly manner;

The wireless charging bracket contains batteries, do not directly discard Please recycle and reuse the used brackets to prevent environmental them;

pollution. The useful ingredients can also be reused to save resources.

Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: 2A3SV-LD-W102 Label and Location WIRELESS CHARGING STAND Model No.: LD-W102 FCC ID : 2A3SV-LD-W102 Size: L: 2.0cm*W: 1.0cm Label Location This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 1

Ningbo Lede Computer Technology Co.,Ltd. Agent Authorization Company: Ningbo Lede Computer Technology Co.,Ltd. Address: 4th Floor, No.183 Xinjian North Road, Yuyao, China Product Name: WIRELESS CHARGING STAND Trade Mark:

Model Number(s): LD-W102 FCC ID: 2A3SV-LD-W102 We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Name:

Louis Lou Title:

Manager Date: 2022-02-25 Company: Ningbo Lede Computer Technology Co.,Ltd.

Ningbo Lede Computer Technology Co.,Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: 2A3SV-LD-W102 Date: 2022-02-25 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

Schematic Diagram Block Diagram Operational Description External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name:

Title:

Louis Lou Manager