submitted | available | document details (if available) | source link |
---|---|---|---|
June 11 2019 | June 11 2019 | 技术资料 北京联盛德微电子有限责任公司 Adobe PDF Library 11.0 |
various | User Manual V1 | Users Manual | 387.86 KiB | June 11 2019 |
Ningbo xiaojiang Internet of Things Technology Co., Ltd XJ-W1A Module Datasheet V1.0.1 Ningbo xiaojiang Internet of Things Technology Co., Ltd AdressRomm 2302-2303, Jiayin Building, No.455, keji Road, Yinzhou District, Ningbo, China Phone0574-83067056 Websitehttp://www.xiaojiang.cc Ningbo xiaojiang Internet of Things Technology Co., Ltd Edition Completion Date Revision record Author Examine Approve V1.0.0 2019-09-20 establish Linda V1.0.1 2019-10-09 change pin RGBCWdescription Linda Ningbo Xiaojiang IoT Technology Co.,Ltd catalogue 1 2 summary ....................................................................................................................................................... 1 characteristic ................................................................................................................................................. 1 Interface ........................................................................................................................................ 1 2.1 2.2 wireless ......................................................................................................................................... 1 2.3 else ................................................................................................................................................ 2 3 Size of product .............................................................................................................................................. 2 4 Interface signal ............................................................................................................................................. 3 5 Environmental suitability.............................................................................................................................. 5 Low temperature working test ...................................................................................................... 5 Low temperature storage test........................................................................................................ 5 High temperature working test ..................................................................................................... 5 High temperature storage test ....................................................................................................... 5 Shock test ..................................................................................................................................... 5 Environmental protection certification ......................................................................................... 6 6 Module reference circuit design ................................................................................................................... 6 7 FCC Cautions ............................................................................................................................................... 7 5.1 5.2 5.3 5.4 5.5 5.6 Ningbo Xiaojiang IoT Technology Co.,Ltd 1 summary XJ-W1A is a Wi-Fi reference design module based on embedded Wi-Fi SoC chip (W600). Stamp hole interface, PCB on-board antenna, small size, easy to develop, rich interface. The module is suitable for intelligent household appliances, smart home, wireless audio and video, intelligent toys, medical monitoring, industrial control and other Internet of things applications. This specification specifies the physical characteristics, technical specifications, communication protocols, product functions, performance, stability, environmental adaptability and security of the module. 2 characteristic 2.1 Interface Stamp hole interface, spacing 2.0mm 2 UART interfaces to support RTS/CTS, baud rate range 1200bps~2Mbps 1 high-speed SPI device controller, working clock range 0-50 MHz Integrated PWM controller, maximum output frequency 20MHz, maximum input frequency 20MHz IntegratedICcontroller IntegratedIScontroller IntegratedGPIO controller 2.2 wireless Support for GB15629.11-2006,IEEE802.11 b/g/e/i/d/k/r/s/w/n wireless standards Support frequency range:2.4~2.4835 GHz Support Wi-Fi WMM/WMM-PS/WPA/WPA2/WPS Support Wi-Fi Direct Support EDCA channel access mode Support for20/40Mbandwidth working mode Support STBCGreenFieldShort-GISupport for reverse transmission Support RIFSframe interval Support AMPDUAMSDU Support IEEE802.11n MCS 0~7MCS32Physical layer transmission rate shift, highest transmission rate to 150Mbps 2/5.5/11 MbpsSupport for Short Preamble when sending rate 1 Ningbo Xiaojiang IoT Technology Co.,Ltd Support HT-immediate Compressed Block AckNormal AckNo Ackresponse mode Support CTS to self Support STA/AP/AP+STAfunction in a bss network a plurality of multicast networks are support,and the encryption mode of each multicast network is different, a maximum of 32 multicast networks and network access STA encryption can be supported When BSS network support is used as AP, the sum of support sites and groups is 32, and 16 sites are supported in IBSS networks 2.3 else Support user programmable GPIO control Support AT instruction protocol based on ASCII coding (UART interface) Support for a wide range of network protocols:TCP/UDP/ICMP/DHCP/DNS/HTTP Support DHCP ServerDNS Server Support for extensible WEB servers Support firmware online upgrade. 3 Size of product Table 3 / 1 list of product specifications Heading Parameter number remarks Support for Wi-Fi mode IEEE802.11b/g/n Radio frequency system impedance 50 SWR
<-10dB frequency range 2.4~2.4835 GHz W l i r e e s s p a r t 20MHz MCS7@-71dBm 40MHz MCS7@-68dBm receiving sensitivity 54Mbps@-73dBm 11Mbps@-87dBm 1Mbps@-95dBm Physical layer data rate 802.11n MCS 0~7150Mbps modulation mode DSSSOFDMDBPSKDQPSKCCKQAM16/64 output power IEEE802.11b, DSSS 1Mbps, POUT = +17dBm 2 Ningbo Xiaojiang IoT Technology Co.,Ltd interface type interface rate IEEE802.11g, OFDM 54Mbps, POUT = +12dBm IEEE802.11n, OFDM MCS7, POUT = +10dBm UARTSPIGPIOPWMICIS 2Mbps@UART (Max) 50Mbps@SPI (Max) H a r d w a r e p a r t working voltage 3.0V 3.6V working current 20mA 110mA working humidity 5%~90%No condensation Storage temperature
-40~+125 working temperature
-40~+85 outline dimension 16.0mm24.0mm Network type STA/AP/AP+STA/Wi-Fi Direct Authentication mode WEP/WPA-PSK/WPA2-PSK way of encryption WEP64/WEP128/TKIP/CCMP(AES) WPS function WPS Energy saving mechanism PS-POLL/Standby networking protocol TCP/UDP/ARP/ICMP/DHCP/DNS/HTTP Interface protocol AT+order set S o f t w a r e p a r t 4 Interface signal The module pin arrangement and size information is shown in figure 4 / 1:
3 Ningbo Xiaojiang IoT Technology Co.,Ltd Fig. 4 / 1 module pin arrangement and size diagram The module pin instructions are shown in Table 4 / 1:
Table 4 /1 Module Pin Description. number name type Default pin function Reuse function 1 2 3 4 5 6 7 8 9 10 11
/RESET NC NC PA1 PB_13 PB_15 PA_5 VDD PA_4 PB_14 PB_17 I I/O I/O I/O I/O P I/O I/O I/O RESET Reserved PWM_2 H_SPI_CS UART0_RX 3.3V UART0_TX H_SPI_INT H_SPI_DI 12 NC Low level reset GPIOPA_1 IC_SCLGPIOPB_13 PWM_4GPIOPB_15 PWM_1GPIOPA_5 GPIOPA_4 IC_DATGPIOPB_14 PWM_2GPIOPB_17 13 14 15 16 17 18 19 20 21 PB_18 PB_6 GND PB_7 PB_9 PB_10 PB_16 PB_8 PB_11 I/O I/O P I/O I/O I/O I/O I/O I/O H_SPI_DO Reserved GND Reserved UART1_CTS UART1_RTS H_SPI_CK PWM_5 UART1_RX GPIOPB_18 GPIOPB_6 GPIOPB_7 GPIOPB_9 GPIOPB_10 PWM_3GPIOPB_16 GPIOPB_8 IC_SCLGPIOPB_11 4 Ningbo Xiaojiang IoT Technology Co.,Ltd 22 PB_12 I/O UART1_TX IC_DATGPIOPB_12 5 Environmental suitability 5.1 Low temperature working test Reference criteria:GB/T 2423.1-2001 When the ambient temperature is-40 1 , the network card module sample can work continuously for 72 hours, and the performance and function of the network card module can be kept in good condition after the test. 5.2 Low temperature storage test Reference criteria:GB/T 2423.1-2001 When the ambient temperature is-40 , the sample of the network card module is placed for 72 hours, and the performance and function of the network card module remain in good condition after the test. 5.3 High temperature working test Reference criteria:GB/T 2423.2-2001 When the ambient temperature is 85 1 , the network card module sample can work continuously for 72 hours, and the performance and function of the network card module can be kept in good condition after the test. 5.4 High temperature storage test Reference criteria:GB/T 2423.2-2001 When the ambient temperature is 125 and the sample of network card module is placed for 72 hours, the performance and function of the network card module remain in good condition after the test. 5.5 Shock test Reference criteria:GB/T 4798.5-2007 Random vibration, vibration direction: X, Y, Z axis, displacement, frequency reference GB/T 4798.5 2007 5M3 grade, vibration time: 60 min per axis. For detailed test methods, 5 Ningbo Xiaojiang IoT Technology Co.,Ltd please refer to the 5M3 level in GB/T 4798.5 / 2007 5.6 Environmental protection certification Comply with RoHS IEC62321-1:2013 standard 6 Module reference circuit design The module reference circuit design is shown in Fig. 6 / 1. Fig. 6 / 1 XJ-W1A reference circuit design 6 Ningbo Xiaojiang IoT Technology Co.,Ltd 7 FCC Cautions Labelling requirements This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Information to user. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by Revogi Innovation Co., Ltd. turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. such modifications could void the user's authority to operate the equipment. the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed 7 Ningbo Xiaojiang IoT Technology Co.,Ltd IMPORTANT NOTE: In the event that these conditions cannot be met (for example co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. Manual Information To the End User:
The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user's manual of the end product which integrates this module. Modular Approval:
The XJ-W1A module is designed to comply with the FCC statement. FCC ID is 2AUPR-XJ-W1A. The host system using XJ-W1A, should have label indicated it contain modular's FCC ID 2AUPR-XJ-W1A. RF warning for Portable device:
The device has been evaluated to meet general RF exposure requirement. To maintain compliance with FCC's RF exposure guidelines, the distance must be at least 20 cm between the radiator and your body, and fully supported by the operating and installation configurations of transmitter and its antenna(s). 8
This product uses the FCC Data API but is not endorsed or certified by the FCC