FCC ID: 2ADZRBGW321 BGW320-505

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6214980.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case Nokia ONT BGW320-505 BGW320-505 Product Guide 3FE-47753-AAAA-TCZZA Issue 3 June 2022 2022 Nokia. Nokia Confidential Information Use subject to agreed restrictions on disclosure and use. BGW320-505 Legal notice Nokia is committed to diversity and inclusion. We are continuously reviewing our customer documentation and consulting with standards bodies to ensure that terminology is inclusive and aligned with the industry. Our future customer documentation will be updated accordingly. This document includes Nokia proprietary and confidential information, which may not be distributed or disclosed to any third parties without the prior written consent of Nokia. This document is intended for use by Nokias customers (You/Your) in connection with a product purchased or licensed from any company within Nokia Group of Companies. Use this document as agreed. You agree to notify Nokia of any errors you may find in this document; however, should you elect to use this document for any purpose(s) for which it is not intended, You understand and warrant that any determinations You may make or actions You may take will be based upon Your independent judgment and analysis of the content of this document. Nokia reserves the right to make changes to this document without notice. At all times, the controlling version is the one available on Nokias site. No part of this document may be modified. NO WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY OF AVAILABILITY, ACCURACY, RELIABILITY, TITLE, NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS MADE IN RELATION TO THE CONTENT OF THIS DOCUMENT. IN NO EVENT WILL NOKIA BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO SPECIAL, DIRECT, INDIRECT, INCIDENTAL OR CONSEQUENTIAL OR ANY LOSSES, SUCH AS BUT NOT LIMITED TO LOSS OF PROFIT, REVENUE, BUSINESS INTERRUPTION, BUSINESS OPPORTUNITY OR DATA THAT MAY ARISE FROM THE USE OF THIS DOCUMENT OR THE INFORMATION IN IT, EVEN IN THE CASE OF ERRORS IN OR OMISSIONS FROM THIS DOCUMENT OR ITS CONTENT. Copyright and trademark: Nokia is a registered trademark of Nokia Corporation. Other product names mentioned in this document may be trademarks of their respective owners. 2022 Nokia. 2022 Nokia. Nokia Confidential Information Use subject to agreed restrictions on disclosure and use. 2 3FE-47753-AAAA-TCZZA June 2022 Issue 3 Contents Contents BGW320-505 About this document............................................................................................................................................5 1 Whats new....................................................................................................................................................11 1.1 1.2 Overview ...........................................................................................................................................11 Whats new in BBD Release 22.02 ...................................................................................................11 2 ANSI ONT safety guidelines........................................................................................................................13 2.1 2.2 2.3 2.4 2.5 Safety instructions.............................................................................................................................13 Safety standards compliance ............................................................................................................14 Electrical safety guidelines................................................................................................................15 ESD safety guidelines .......................................................................................................................16 Laser safety guidelines .....................................................................................................................16 3 BGW320-505 unit data sheet.......................................................................................................................19 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 Overview ...........................................................................................................................................19 BGW320-505 part numbers and identification ..................................................................................19 BGW320-505 general description .....................................................................................................20 BGW320-505 software and installation feature support....................................................................26 BGW320-505 interfaces and interface capacity................................................................................27 BGW320-505 service LED ................................................................................................................29 BGW320-505 detailed specifications ................................................................................................30 BGW320-505 GEM ports and T-CONTs............................................................................................31 BGW320-505 standards compliance ................................................................................................31 3.10 BGW320-505 special considerations ................................................................................................32 4 Install or replace a BGW320-505 indoor ONT............................................................................................35 4.1 4.2 4.3 4.4 4.5 Overview ...........................................................................................................................................35 Prerequisites .....................................................................................................................................35 Safety information .............................................................................................................................35 Install a BGW320-505 indoor ONT ...................................................................................................36 Replace a BGW320-505 indoor ONT................................................................................................39 June 2022 Issue 3 2022 Nokia. Nokia Confidential Information Use subject to agreed restrictions on disclosure and use. 3FE-47753-AAAA-TCZZA 3 Contents BGW320-505 2022 Nokia. Nokia Confidential Information Use subject to agreed restrictions on disclosure and use. 4 3FE-47753-AAAA-TCZZA June 2022 Issue 3 About this document BGW320-505 About this document Purpose This documentation set provides information about safety, features and functionality, ordering, hardware installation and maintenance, and software installation procedures of this ONT for the current release. Intended audience This documentation set is intended for planners, administrators, operators, and maintenance personnel involved in installing, upgrading, or maintaining the ONTs. The reader must be familiar with general telecommunications principles. Safety information For your safety, this document contains safety statements. Safety statements are given at points where risks of damage to personnel, equipment, and operation may exist. Failure to follow the directions in a safety statement may result in serious consequences. Safety Information Examples DANGER Hazard Danger indicates that the described activity or situation may result in serious personal injury or death; for example, high voltage or electric shock hazards. WARNING Equipment Damage Warning indicates that the described activity or situation may, or will, cause equipment damage or serious performance problems. CAUTION Service Disruption Caution indicates that the described activity or situation may, or will, cause service interruption. Note:A note provides information that is, or may be, of special interest. Acronyms and initialisms The expansions and optional descriptions of most acronyms and initialisms appear in the glossary June 2022 Issue 3 2022 Nokia. Nokia Confidential Information Use subject to agreed restrictions on disclosure and use. 3FE-47753-AAAA-TCZZA 5 About this document BGW320-505 Nokia quality processes Nokias ONT manufacturing, testing, and inspecting practices are in compliance with TL 9000 requirements. These requirements are documented in the Fixed Networks Quality Manual 3FQ-

30146-6000-QRZZA. The quality practices adequately ensure that technical requirements and customer end-point requirements are met. The customer or its representatives may be allowed to perform on-site quality surveillance audits, as agreed upon during contract negotiations. Documents Documents are available using ALED or OLCS. To download a ZIP file package of the customer documentation Navigate to http://customer.nokia.com/s/ and enter your user name and password. If you are a new user and require access to this service, please contact your Nokia sales representative. Select Products. Type your product name in the Find and select a product field and click the search icon. Select a product. Click Downloads: ALED to go to the Electronic Delivery: Downloads page. Select Documentation from the list. Select a release from the list. 1 2 3 4 5 6 7 Follow the on-screen directions to download the file. END OF STEPS To access individual documents Individual PDFs of customer documents are also accessible through the Nokia Support Portal website. 2022 Nokia. Nokia Confidential Information Use subject to agreed restrictions on disclosure and use. 6 3FE-47753-AAAA-TCZZA June 2022 Issue 3 About this document BGW320-505 Navigate to http://customer.nokia.com/s/ and enter your user name and password. If you are a new user and require access to this service, please contact your Nokia sales representative. Select Products. Type your product name in the Find and select a product field and click the search icon. Select a product. Click Documentation: Doc Center to go to the product page in the Doc Center. Select a release from the Release list and click SEARCH. 1 2 3 4 5 6 Click on the PDF icon to open or save the file. END OF STEPS Procedures with options or substeps When there are options in a procedure, they are identified by letters. When there are required substeps in a procedure, they are identified by roman numerals. Example of options in a procedure At Step 1, you can choose option a or b. At Step 2, you must do what the step indicates. This step offers two options. You must choose one of the following:

a. This is one option. b. This is another option. 1 2 You must perform this step. END OF STEPS Example of required substeps in a procedure At Step 1, you must perform a series of substeps within a step. At Step 2, you must do what the step indicates. June 2022 Issue 3 2022 Nokia. Nokia Confidential Information Use subject to agreed restrictions on disclosure and use. 3FE-47753-AAAA-TCZZA 7 About this document BGW320-505 This step has a series of substeps that you must perform to complete the step. You must perform the following substeps:

a. This is the first substep. b. This is the second substep. c. This is the third substep. 1 2 You must perform this step. END OF STEPS Multiple PDF document search You can use Adobe Reader Release 6.0 and later to search multiple PDF files for a common term. Adobe Reader displays the results in a single display panel. The results are grouped by PDF file, and you can expand the entry for each file. Note:The PDF files in which you search must be in the same folder. To search multiple PDF files for a common term Open Adobe Acrobat Reader. Choose EditSearch from the Acrobat Reader main menu. The Search PDF panel displays. Enter the search criteria. Select All PDF Documents In. Select the folder in which to search using the drop-down menu. 1 2 3 4 5 6 Click Search. Acrobat Reader displays the search results. You can expand the entries for each document by clicking on the + symbol. END OF STEPS 2022 Nokia. Nokia Confidential Information Use subject to agreed restrictions on disclosure and use. 8 3FE-47753-AAAA-TCZZA June 2022 Issue 3 About this document BGW320-505 Technical support For details, refer to the Nokia Support portal (https://customer.nokia.com/support/s/). For ordering information, contact your Nokia sales representative. How to comment To comment on this document, go to the Online Comment Form (https://documentation.nokia.com/

comments/) or e-mail your comments to the Comments Hotline (mailto:comments@nokia.com). June 2022 Issue 3 2022 Nokia. Nokia Confidential Information Use subject to agreed restrictions on disclosure and use. 3FE-47753-AAAA-TCZZA 9 About this document BGW320-505 2022 Nokia. Nokia Confidential Information Use subject to agreed restrictions on disclosure and use. 10 3FE-47753-AAAA-TCZZA June 2022 Issue 3 Whats new Overview BGW320-505 1 Whats new 1.1 Overview 1.1.1 Purpose This chapter provides the details of features and other documentation changes updated in the product guide in each release. 1.1.2 Contents 1.1 Overview 1.2 Whats new in BBD Release 22.02 1.2 Whats new in BBD Release 22.02 11 11 Table 1-1, Whats new in BBD Release 22.02 (p. 11) lists the new features and enhancements added to the BGW320-505 product guide in Issue 3. Table 1-1 Whats new in BBD Release 22.02 Feature/enhancement Description See New features/enhancements BGW320-505 pluggable optics supply details for customer specific variants. Added the ordering kit part number (3FE 46901 AC) for pluggable optics. Table 3-3, BGW320-505 pluggable optics

(p. 20) June 2022 Issue 3 2022 Nokia. Nokia Confidential Information Use subject to agreed restrictions on disclosure and use. 3FE-47753-AAAA-TCZZA 11 Whats new Whats new in BBD Release 22.02 BGW320-505 2022 Nokia. Nokia Confidential Information Use subject to agreed restrictions on disclosure and use. 12 3FE-47753-AAAA-TCZZA June 2022 Issue 3 ANSI ONT safety guidelines Safety instructions BGW320-505 2 ANSI ONT safety guidelines This chapter provides information about the mandatory regulations that govern the installation and operation of the optical network terminals or units (ONTs or ONUs) in the North American or ANSI market. 2.1 Safety instructions This section describes the safety instructions that are provided in the ONT customer documentation and on the equipment. 2.1.1 Safety instruction boxes in customer documentation The safety instruction boxes are provided in the ONT customer documentation. Observe the instructions to meet safety requirements. The following is an example of the Danger box. DANGER Hazard Possibility of personal injury. The Danger box indicates that the described activity or situation may pose a threat to personal safety. It calls attention to a situation or procedure which, if not correctly performed or adhered to, may result in death or serious physical harm. Do not proceed beyond a Danger box until the indicated conditions are fully understood and met. The following is an example of the Warning box. WARNING Equipment Damage Possibility of equipment damage. Possibility of data loss. The Warning box indicates that the described activity or situation may, or will, cause equipment damage, loss of data, or serious performance problems. It identifies a possible equipment-

damaging situation or provides essential information to avoid the degradation of system operations or data. Do not proceed beyond a warning until the indicated conditions are fully understood and met. The following is an example of the Caution box. June 2022 Issue 3 2022 Nokia. Nokia Confidential Information Use subject to agreed restrictions on disclosure and use. 3FE-47753-AAAA-TCZZA 13 ANSI ONT safety guidelines Safety standards compliance BGW320-505 CAUTION Service Disruption Possibility of service interruption. Service interruption. The Caution box indicates that the described activity or situation may, or will, cause service interruption. Do not proceed beyond a caution until the indicated conditions are fully understood and met. The following is an example of the Note box. Note: Information of special interest. The Note box provides information that assists the personnel working with ONTs. It does not provide safety-related instructions. 2.1.2 Safety-related labels The ONT equipment is labeled with specific safety compliance information and instructions that are related to a variant of the ONT. Observe the instructions on the safety labels. The following table provides examples of the text in the various ONT safety labels. Table 2-1 Safety labels Description CE marking Label text There are various CE symbols for CE compliance. 2.2 Safety standards compliance This section describes the ONT compliance with North American safety standards. WARNING Equipment Damage Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 2.2.1 EMC, EMI, and ESD standards compliance The ONT equipment complies with the following requirements:

Federal Communications Commission (FCC) CFR 47, Part 15, Subpart B, Subpart C, and Subpart E, Class A requirements for OLT equipment EN 61000-4-4 Testing and measurement techniques - Electrical fast transient/burst immunity test This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection 2022 Nokia. Nokia Confidential Information Use subject to agreed restrictions on disclosure and use. 14 3FE-47753-AAAA-TCZZA June 2022 Issue 3 ANSI ONT safety guidelines Electrical safety guidelines BGW320-505 against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is needed. Consult the dealer or an experienced radio/TV technician for help. 2.2.2 Equipment safety standard compliance The ONT equipment complies with the requirements of UL60950-1 and Indoor ONTs to Information Technology Equipment (ITE). 2.2.3 Environmental standards compliance The ONT equipment complies with the following standards:

SPS-1019_Reliability_Env_Mech v2_5_REL_07-17-17 Section 6 Environmental Requirements 2.2.4 Resistibility requirements compliance The ONT equipment complies with the requirements of ITU Recommendation K.21 for resistibility of telecommunication equipment installed in customer premises to overvoltage and overcurrents. 2.3 Electrical safety guidelines This section provides the electrical safety guidelines for the ONT equipment. Note: The ONTs comply with the U.S. National Electrical Code. However, local electrical authorities have jurisdiction when there are differences between the local and U.S. standards. 2.3.1 Power supplies The use of any non-Nokia approved power supplies or power adapters is not supported or endorsed by Nokia. Such use will void any warranty or support contract with Nokia. Such use greatly increases the danger of damage to equipment or property. 2.3.2 Cabling The following are the guidelines regarding cables used for the ONT equipment:

Use only cables approved by the relevant national electrical code. The ONTs have been evaluated for use with external POTS wiring without primary protection that may not exceed 140 ft (43 m) in reach. However, the power cable must not exceed 100 ft

(31 m). June 2022 Issue 3 2022 Nokia. Nokia Confidential Information Use subject to agreed restrictions on disclosure and use. 3FE-47753-AAAA-TCZZA 15 ANSI ONT safety guidelines ESD safety guidelines 2.3.3 Protective earth BGW320-505 Earthing and bonding of the ONTs must comply with the requirements of NEC article 250 or local electrical codes. 2.4 ESD safety guidelines The ONT equipment is sensitive to ESD. While the BGW320-505 product is designed to operate per specifications, the product might be installed in a location which exceeds them. Do not install the BGW320-505 in an area with high humidity or where there is high chance of ESD. CAUTION Service Disruption This equipment is ESD sensitive. End users should not attempt to open the BGW320-505 enclosure. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment complies with FCC radiation exposure limits as set forth for an uncontrolled environment. This equipment should be installed and operated maintaining a minimum distance of 54 cm (21.25 inches) between the device and your body. During installation and maintenance, service personnel must wear wrist straps to prevent damage caused by ESD. Nokia recommends that you prepare the site before you install the ONT equipment. In addition, you must control relative humidity, use static dissipating material for furniture or flooring, and restrict the use of air conditioning. 2.5 Laser safety guidelines Observe the following instructions when you perform installation, operations, and maintenance tasks on the ONT equipment. Only qualified service personnel who are extremely familiar with laser radiation hazards should install or remove the fiber optic cables and units in this system. DANGER Hazard There may be invisible laser radiation at the fiber optic cable when the cable is removed from the connector. Avoid direct exposure to the laser beam. Observe the following danger for laser hazard. Eyes can be damaged when they are exposed to a laser beam. Take necessary precautions before you plug in the optical modules. 2022 Nokia. Nokia Confidential Information Use subject to agreed restrictions on disclosure and use. 16 3FE-47753-AAAA-TCZZA June 2022 Issue 3 ANSI ONT safety guidelines Laser safety guidelines BGW320-505 DANGER Hazard Possibility of equipment damage. Risk of eye damage by laser radiation. 2.5.1 Normal laser operation In normal operation, fiber cable laser radiation is always off until it receives signal from the line terminal card. Eyes can be damaged when they exposed to a laser beam. Operating personnel must observe the instructions on the laser explanatory label before plugging in the optical module. DANGER Hazard Risk of eye damage by laser radiation. 2.5.2 Location class Use cable supports and guides to protect the receptacles from strain. June 2022 Issue 3 2022 Nokia. Nokia Confidential Information Use subject to agreed restrictions on disclosure and use. 3FE-47753-AAAA-TCZZA 17 ANSI ONT safety guidelines Laser safety guidelines BGW320-505 2022 Nokia. Nokia Confidential Information Use subject to agreed restrictions on disclosure and use. 18 3FE-47753-AAAA-TCZZA June 2022 Issue 3 BGW320-505 unit data sheet Overview BGW320-505 3 BGW320-505 unit data sheet 3.1 Overview 3.1.1 Purpose 3.1.2 Contents 3.1 Overview 3.2 BGW320-505 part numbers and identification 3.3 BGW320-505 general description 3.4 BGW320-505 software and installation feature support 3.5 BGW320-505 interfaces and interface capacity 3.6 BGW320-505 service LED 3.7 BGW320-505 detailed specifications 3.8 BGW320-505 GEM ports and T-CONTs 3.9 BGW320-505 standards compliance 3.10 BGW320-505 special considerations 19 19 20 26 27 29 30 31 31 32 3.2 BGW320-505 part numbers and identification Table 3-1, Identification of BGW320-505 indoor ONT (p. 19) provides part numbers and identification information for the BGW320-505 indoor ONT. Table 3-1 Identification of BGW320-505 indoor ONT Ordering kit part number Provisioning number Description 3FE 48263 AA

(Customer-

specific variant) 3FE 47753 AA Package P ONT unit with one RJ-14 dual voice port, three 1000/100/10 BaseT Ethernet interfaces, and one 5G/2.5G/1G/100M Ethernet port, all four as LAN ports and one 1G/100M/10M WAN Ethernet port. This ONT also supports 802.11b/g/n/ac tri-band Wi-Fi: 5 GHz low-band, 5 GHz high-band, and 2.4 GHz radios. This ONT has one USB 2.0 port with a Type A connector and has an SFP cage supporting pluggable SFP+ optical modules. CLEI CPR ECI/

Bar code BVMG400BRA 474079 June 2022 Issue 3 2022 Nokia. Nokia Confidential Information Use subject to agreed restrictions on disclosure and use. 3FE-47753-AAAA-TCZZA 19 BGW320-505 unit data sheet BGW320-505 general description BGW320-505 Table 3-1 Identification of BGW320-505 indoor ONT (continued) Ordering kit part number Provisioning number Description 3FE 48263 AB

(Customer-

specific variant) 3FE 47753 AB Package P ONT unit with one RJ-14 dual voice port, three 1000/100/10 BaseT Ethernet interfaces, and one 5G/2.5G/1G/100M Ethernet port, all four as LAN ports and one 1G/100M/10M WAN Ethernet port. This ONT also supports 802.11b/g/n/ac tri-band Wi-Fi: 5 GHz low-band, 5 GHz high-band, and 2.4 GHz radios. This ONT has one USB 2.0 port with a Type A connector and has an SFP cage supporting pluggable SFP+ optical modules. Comes with a 2-pin AC/DC U.S. power adapter with AC cable. CLEI CPR ECI/

Bar code BVMGX10BRA 475267 Table 3-2, Supported power adapters (p. 20) provides information on supported power adapters. Table 3-2 Supported power adapters Part number 1AF 32246 AA 1AF 32246 BA Description Power supply unit, Delta EPS48R0-16, US Plug, 2-Pin, 12V, 4A, L6, Surge 6KV. Includes DC power cord. Included with ONT. Power supply unit, Delta EPS48R1-16, US Plug, 2-Pin, 12V, 4A, L6, Surge 6KV. Includes DC power cord. Included with ONT. Table 3-3, BGW320-505 pluggable optics (p. 20) provides optics ordering information for BGW320-505 ONTs. These pluggable optics modules can be ordered separately. Table 3-3 BGW320-505 pluggable optics Part number 3FE 46899 AB Type GPON Description SFP+ GPON optical module, SC/APC, Industrial-Temp 3FE 46900 AB Alt-Optic GPON SFP+ Alt-Optic GPON optical module, SC/APC, Industrial-Temp 3FE 46901 AC XGS PON SFP+ XGS 10G GPON optical module, SC/APC, Industrial-Temp 3.3 BGW320-505 general description BGW320-505 ONTs are designed to cater to business and residential customer requirements. The ONT offers data and video services to the subscriber. When used with an appropriate pluggable SFP+ PON module in the ONTs SFP cage, the BGW320-505 indoor ONT provides the subscriber interface for the network by terminating the PON interface and converting it to user interfaces that directly connect to subscriber devices. The ONT is compatible with all existing subscriber equipment, including analog phones with rotary dial capability, cordless phones, modems, fax machines, and caller ID boxes (Type I, Type II, and Type III). 2022 Nokia. Nokia Confidential Information Use subject to agreed restrictions on disclosure and use. 20 3FE-47753-AAAA-TCZZA June 2022 Issue 3 BGW320-505 unit data sheet BGW320-505 general description BGW320-505 For LAN Ethernet interfaces, the BGW320-505 ONT feature one 5G Ethernet port and provides three 1000/100/10 BaseT Ethernet ports. For the WAN there is an optional 1000/100/10 BaseT Ethernet port labeled ONT. And for Wi-Fi, the ONT supports 802.11ax tribands of 5 GHz low-band, 5 GHz high-band, and 2.4 GHz. The ONT provides one POTS port with one dual-voice port RJ-14 connector. The ONT also features a power supply connection, a reset button, one USB 2.0 Type A port, and Wi-Fi Protected Setup (WPS) button. Use the WPS button to enable the WPS discovery mode of new Wi-Fi devices. BGW320-505 ONTs can be placed on a flat surface, such as a desk or shelf. Figure 3-1, BGW320-505 ONT unit (p. 20) through Figure 3-7, BGW320-505 ONT back view

(connections) (p. 25) show the different views of the BGW320-505 ONT. Figure 3-1 BGW320-505 ONT unit June 2022 Issue 3 2022 Nokia. Nokia Confidential Information Use subject to agreed restrictions on disclosure and use. 3FE-47753-AAAA-TCZZA 21 BGW320-505 unit data sheet BGW320-505 general description BGW320-505 Figure 3-2 BGW320-505 ONT top view Figure 3-3 BGW320-505 ONT front view 2022 Nokia. Nokia Confidential Information Use subject to agreed restrictions on disclosure and use. 22 3FE-47753-AAAA-TCZZA June 2022 Issue 3 BGW320-505 unit data sheet BGW320-505 general description BGW320-505 Figure 3-4 BGW320-505 ONT left view June 2022 Issue 3 2022 Nokia. Nokia Confidential Information Use subject to agreed restrictions on disclosure and use. 3FE-47753-AAAA-TCZZA 23 BGW320-505 unit data sheet BGW320-505 general description BGW320-505 Figure 3-5 BGW320-505 ONT right view Figure 3-6 BGW320-505 ONT bottom view Note: The values shown in the Figure 3-6, BGW320-505 ONT bottom view (p. 24) is for illustration purpose only and not the real time values. 2022 Nokia. Nokia Confidential Information Use subject to agreed restrictions on disclosure and use. 24 3FE-47753-AAAA-TCZZA June 2022 Issue 3 BGW320-505 unit data sheet BGW320-505 general description BGW320-505 Figure 3-7 BGW320-505 ONT back view (connections) BGW320-505 indoor ONTs provide the following functions:

Blue color 5 Gbps interface supports 5G/2.5G/1G/100M auto negotiation Three yellow 1000/100/10 Base T Ethernet ports with auto negotiation and MDI/MDIX auto sensing, one red ONT Ethernet uplink WAN port supporting 1000/100/10 BaseT Ethernet One POTS port for carrier grade voice services One USB 2.0 Type A port Triple-Play services type, including voice, video and high-speed Internet access Traffic classification and QoS capability Support for fax services Built-in layer 2 switch; Line Rate L2 traffic 1 GB RAM and 4 GB EMMC memory card in the board IP video distribution Optics that support received signal strength indication (RSSI) Supports 802.11ac, 802.11g, 802.11n, and 802.11ax June 2022 Issue 3 2022 Nokia. Nokia Confidential Information Use subject to agreed restrictions on disclosure and use. 3FE-47753-AAAA-TCZZA 25 BGW320-505 unit data sheet BGW320-505 software and installation feature support BGW320-505 WPS with a push button 64/128 WEP encryption WPA, WPA-PSK/TKIP WPA2, WPA2-PSK/AES VLAN tagging/detagging and marking/remarking of IEEE 802.1p per Ethernet port Dying gasp support SIP voice support DTMF dialing Echo cancellation (G.168) Caller ID, call waiting, call hold, 3-way calling, call transfer, message waiting Forward Error Correction (FEC) Frame Check Sequence (FCS) error counter Support for multiple SSIDs (private and public instances) Routed mode per LAN port DHCP client/server DNS server/client Network Address Translation (NAT) Network Address Port Translation (NAPT) IGMP snooping and proxy (v2/v3) OMCI, TR-069, and Web GUI management support Performance monitoring and alarm reporting Remote software image downloading and activation IP/MAC/URL filter Multi-level firewall and ACL 3.3.1 TR69 authentication using TLS and CA certificates BGW320-505 ONTs support TLS, as well as ACS authentication using SHA-256 pre-installed certificates. If the URL is set to the https://... format, by default, the connection will use TLS without authentication mode. The ONT can also authenticate the ACS using a pre-installed CA certificate. 3.4 BGW320-505 software and installation feature support For information on installing or replacing the BGW320-505, see:

Chapter 4, Install or replace a BGW320-505 indoor ONT For information on the following topics, see the Nokia ONT Product Overview Guide:

Ethernet interface specifications POTS interface specifications 2022 Nokia. Nokia Confidential Information Use subject to agreed restrictions on disclosure and use. 26 3FE-47753-AAAA-TCZZA June 2022 Issue 3 BGW320-505 unit data sheet BGW320-505 interfaces and interface capacity BGW320-505 RSSI specifications Wi-Fi specifications ONT optical budget ONT management using an ONT interface 3.5 BGW320-505 interfaces and interface capacity The following table describes the supported interfaces and interface capacity for BGW320-505 indoor ONTs. Table 3-4 BGW320-505 indoor ONT interface connection capacity ONT type and model Maximum capacity 1000/100/10 BaseT BGW320-505 3 yellow LAN ports, 1 red WAN port 5G/2.5G/

1G/100M Ethernet port 5 GHz low-band Wi-Fi 1 5 GHz high-band Wi-Fi 1 2.4 GHz Wi-Fi 1 RJ-14 SFP+

USB 1 1 1 1 1 1 1 Notes:

1. Supported wirelessly over the IP service. June 2022 Issue 3 2022 Nokia. Nokia Confidential Information Use subject to agreed restrictions on disclosure and use. 3FE-47753-AAAA-TCZZA 27 BGW320-505 unit data sheet BGW320-505 interfaces and interface capacity BGW320-505 3.5.1 BGW320-505 connections and components Figure 3-8 BGW320-505 Physical connections Table 3-5, BGW320-505 indoor ONT physical connections (p. 28) describes the physical connections for the BGW320-505 indoor ONT. Table 3-5 BGW320-505 indoor ONT physical connections Connection Description ONT One optional uplink WAN Ethernet RJ-45 port colored red and labeled ONT. The ONT connection provides Ethernet access to home, Internet access, and POTS services. The ONT connection is red and located at the top of the connections. Ethernet ports

(LAN 1 to 4 -three GE and one 5 GE) These connections are provided through Ethernet RJ-45 cables. Up to three 1000/100/10 Base-T Ethernet interfaces are supported. The Ethernet ports can support both data and in-band video services on all four interfaces. These three ports are yellow and located in the middle of the connections. The 5G Ethernet port is also provided through an RJ-45 cable. One 5G connection is supported. This port is blue and located at the bottom of the connections. 2022 Nokia. Nokia Confidential Information Use subject to agreed restrictions on disclosure and use. 28 3FE-47753-AAAA-TCZZA June 2022 Issue 3 BGW320-505 unit data sheet BGW320-505 service LED BGW320-505 Table 3-5 BGW320-505 indoor ONT physical connections (continued) Connection Reset button Phone

(POTS) Power input USB SFP Description Pressing the Reset button for less than 10 seconds reboots the ONT; pressing the Reset button for 10 seconds resets the ONT to its factory defaults. This connection is provided through one RJ-14 POTS port. This connection is provided through a power cable with a Delta Electronics EPS48R0-16 2-pin connector. Use only approved power adapters. The use of any non-approved power adapter may cause damage to persons or equipment. Make sure that all power cord connectors are securely and completely plugged into receptacles. Do not use the power adapter in an outdoor environment or any wet locations. Protect the power adapter from liquids. The conditions above may cause fire, short circuit, electrocution or shock injury. This connection is provided through one USB 2.0 Type A port. The voltage rate is 5V. This connection is provided through a SFP+ cage that uses an optical fiber cable. One SFP+ connection is supported. WPS button This button enables the WPS discovery mode of new Wi-Fi devices. 3.6 BGW320-505 service LED The front of the BGW320-505 functions has a multi-color service LED indicator. The LED color and pulse rate acts as a signal to the user, which indicates the state of the BGW320-505 and the quality of its backhaul link. Table 3-6, BGW320-505 service LED indications (p. 29) provides the service LED description for the BGW320-505. Table 3-6 BGW320-505 service LED indications LED color LED behavior LED behavior description Off White Off Power off White solid IP service is established White flashing (Slow) Attempting a broadband connection. White flashing (Fast) Attempting an IEEE 802.1X authentication, or trying to obtain DHCP information. Orange Orange flashing A software upgrade is in progress. A Power-On Self-Test (POST) is in progress. Yellow Yellow flashing One or more configured VoIP lines are not registered with a SIP proxy server. No signal on a particular broadband connection. The connection is configured for use. No signal on one pair of a bonded-pair connection (as identified through manual or G.997.1 communication). June 2022 Issue 3 2022 Nokia. Nokia Confidential Information Use subject to agreed restrictions on disclosure and use. 3FE-47753-AAAA-TCZZA 29 BGW320-505 unit data sheet BGW320-505 detailed specifications BGW320-505 Table 3-6 BGW320-505 service LED indications (continued) LED color Red LED behavior LED behavior description Red flashing (Slow) Broadband connection fails to be established for more than three consecutive minutes, or there is no signal on all broadband connections. Red flashing (Fast) The device is attempting to connect to an IP and failed. RedPOST failure (Not bootable) A device malfunction has occurred or the device is overheating. 3.7 BGW320-505 detailed specifications Table 3-7, BGW320-505 indoor ONT physical specifications (p. 30) lists the physical specifications for the BGW320-505 indoor ONT. Table 3-7 BGW320-505 indoor ONT physical specifications Description Length Width Height Weight [within 0.5 lb (0.23 kg)]

Specification 7.8 in. (200 mm) 3.9 in. (100 mm) 7.5 in. (191 mm) 3.8 lb (1.742 kg) Table 3-8, BGW320-505 indoor ONT power consumption specifications (p. 30) lists the power consumption specifications for the BGW320-505 indoor ONT. Table 3-8 BGW320-505 indoor ONT power consumption specifications Mnemonic Maximum power

(Not to exceed) Condition Minimum power Condition BGW320-505 41.73 W 12 VDC when all ports operating with full loading, dual 5x REN 9.66 W Idle Table 3-9, BGW320-505 indoor ONT environmental specifications (p. 30) lists the environmental specifications for the BGW320-505 indoor ONT. Table 3-9 BGW320-505 indoor ONT environmental specifications Mounting method Temperature range and humidity Altitude Desk or shelf Operating: 32F to 107F (0C to +41.7C) ambient temperature 5% to 95% relative humidity, non-condensing at 40C Contact your Nokia technical support representative for more information 2022 Nokia. Nokia Confidential Information Use subject to agreed restrictions on disclosure and use. 30 3FE-47753-AAAA-TCZZA June 2022 Issue 3 BGW320-505 unit data sheet BGW320-505 GEM ports and T-CONTs BGW320-505 3.8 BGW320-505 GEM ports and T-CONTs Table 3-10, BGW320-505 indoor ONT capacity for GEM ports and T-CONTs (p. 30) lists the maximum number of supported T-CONTs and GEM ports. Table 3-10 BGW320-505 indoor ONT capacity for GEM ports and T-CONTs BGW320-505 ONT Maximum Notes GEM ports per indoor ONT T-CONTs per indoor ONT 256 40 3.9 BGW320-505 standards compliance BGW320-505 indoor ONTs are compliant with the following standards:

EN 61000-4-2 Testing and measurement techniques - Electrical fast transient/burst immunity test EN 61000-4-2 Testing and measurement techniques - Electrostatic discharge immunity test EN 61000-4-2 Testing and measurement techniques - Immunity to conducted disturbances induced by radio frequency fields EN 61000-4-2 Testing and measurement techniques - Radiated, radio frequency, electromagnetic field immunity test FCC CFR 47, Part 15, Subparts B, C, and E. 3.9.1 Responsible party Table 3-11, Responsible party contact information (p. 31) lists the party in the US responsible for this ONT. Table 3-11 Responsible party contact information Legal Company name Nokia Solutions and Networks OY Nokia of America Corporation Offices Support Offices | Nokia (https://www.nokia.com/contact-us/offices/#north-america) Business Support | Nokia (https://www.nokia.com/networks/business-support/) Other contacts Contact us | Nokia (https://www.nokia.com/contact-us/) 3.9.2 Energy-related products standby and off modes compliance The BGW320-505 ONTS qualify as equipment with high network availability (HiNA) functionality. Since the main purpose of BGW320-505 ONTs is to provide network functionality with HiNA 7 days

/24 hours, the modes Off/Standby, Power Management, and Networked Standby are inappropriate. For information about the type and number of network ports, see 3.5 BGW320-505 interfaces and interface capacity (p. 27) in this chapter. For information about power consumption, see 3.7 BGW320-505 detailed specifications (p. 30) in this chapter. June 2022 Issue 3 2022 Nokia. Nokia Confidential Information Use subject to agreed restrictions on disclosure and use. 3FE-47753-AAAA-TCZZA 31 BGW320-505 unit data sheet BGW320-505 special considerations BGW320-505 3.9.3 FCC statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. 3.9.4 FCC Radiation Exposure Statement This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 54 cm (21.25 inches) from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and consider removing the no-collocation statement. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. CAUTION Service Disruption Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 3.10 BGW320-505 special considerations BGW320-505 are package P ONTs. 3.10.1 Wi-Fi service BGW320-505 indoor ONTs feature Wi-Fi service as well as voice and data services. Wi-Fi is a wireless networking technology that uses radio waves to provide wireless HSI and network 2022 Nokia. Nokia Confidential Information Use subject to agreed restrictions on disclosure and use. 32 3FE-47753-AAAA-TCZZA June 2022 Issue 3 BGW320-505 unit data sheet BGW320-505 special considerations BGW320-505 connections. This ONT complies with the IEEE 802.11 standards, which the Wi-Fi Alliance defines as the basis for Wi-Fi technology. Wi-Fi physical features BGW320-505 indoor ONTs have one WPS push button (located on the front of the ONT) that enables the WPS discovery mode of new Wi-Fi devices. Wi-Fi standards and certifications The Wi-Fi service on BGW320-505 indoor ONTs supports the following IEEE standards and Wi-Fi Alliance certifications:

Certified for Wi-Fi 802.11ac/b/g/n/ax standards WPA support including WPA-PSK Certified for WPA2-Personal Wi-Fi GUI features BGW320-505 indoor ONTs have HTML-based Wi-Fi configuration GUIs. 3.10.2 BGW320-505 ONT considerations and limitations The following table lists the considerations and limitations for Package P BGW320-505 ONTs. Table 3-12 BGW320-505 ONT considerations and limitations Considerations and limitations This device is restricted to indoor use in accordance with proper ventilation (as described in Step Step 1 of Section 4.4 Install a BGW320-505 indoor ONT (p. 36) of the Chapter 4, Install or replace a BGW320-505 indoor ONT, and temperature requirements, as described in Section 3.7 BGW320-505 detailed specifications (p. 30). June 2022 Issue 3 2022 Nokia. Nokia Confidential Information Use subject to agreed restrictions on disclosure and use. 3FE-47753-AAAA-TCZZA 33 BGW320-505 unit data sheet BGW320-505 special considerations BGW320-505 2022 Nokia. Nokia Confidential Information Use subject to agreed restrictions on disclosure and use. 34 3FE-47753-AAAA-TCZZA June 2022 Issue 3 Install or replace a BGW320-505 indoor ONT Overview BGW320-505 4 Install or replace a BGW320-505 indoor ONT 4.1 Overview 4.1.1 Purpose This chapter provides the steps to:

Install a BGW320-505 indoor ONT Replace a BGW320-505 indoor ONT 4.1.2 Contents 4.1 Overview 4.2 Prerequisites 4.3 Safety information 4.4 Install a BGW320-505 indoor ONT 4.5 Replace a BGW320-505 indoor ONT 4.2 Prerequisites Ensure that you have all required cables. 4.3 Safety information Read the following safety information before installing the unit. DANGER Hazard 35 35 35 36 39 Hazardous electrical voltages and currents can cause serious physical harm or death. Always use insulated tools and follow proper safety precautions when connecting or disconnecting power circuits. Make sure all sources of power are turned off and have no live voltages present on feed lines or terminals. Use a voltmeter to measure for voltage before proceeding. Always contact the local utility company before connecting the enclosure to the utilities. June 2022 Issue 3 2022 Nokia. Nokia Confidential Information Use subject to agreed restrictions on disclosure and use. 3FE-47753-AAAA-TCZZA 35 Install or replace a BGW320-505 indoor ONT Install a BGW320-505 indoor ONT BGW320-505 WARNING Equipment Damage This equipment is ESD sensitive. Proper ESD protections should be used when removing the fiber access cover of the indoor ONT. Do not directly connect the 10G PON ONT to the 10G PON OLT. CAUTION Service Disruption Keep indoor ONTs out of direct sunlight. Prolonged exposure to direct sunlight can damage the unit. Note: Observe the local and national laws and regulations that may be applicable to this installation. Observe the following:

The indoor ONT should be installed in accordance with the applicable requirements of the NEC or CEC. Local authorities and practices take precedent when there is conflict between the local standard and the NEC or CEC. The indoor ONT may require the presence of a fiber termination, which must be installed by qualified service personnel. Indoor ONTs must be installed with cables that are suitably rated and listed for indoor use. See the detailed specifications in the Chapter 3, BGW320-505 unit data sheet for the temperature ranges for these ONTs. 4.4 Install a BGW320-505 indoor ONT 1 WARNING Equipment Damage There is a risk of overheating if the BGW320 is not properly ventilated. The unit should not be placed in an enclosed cabinet or location without proper ventilation. Make sure the temperature requirement described in Section 3.7 BGW320-505 detailed specifications (p. 30) are adhered to. Place the indoor ONT unit on a flat surface, such as a desk or shelf. Note: The BGW320-505 ONT cannot be stacked with another ONT or with other equipment. The ONT mounting requirements are:

Place the unit in a vertical upright position with the feet and grill facing down and the flat top facing up Allow a minimum 100 mm clearance above the top cover 2022 Nokia. Nokia Confidential Information Use subject to agreed restrictions on disclosure and use. 36 3FE-47753-AAAA-TCZZA June 2022 Issue 3 Install or replace a BGW320-505 indoor ONT Install a BGW320-505 indoor ONT BGW320-505 2 3 4 Do not place any heat source directly above the top cover or below the bottom cover Review the connection locations, as shown in Figure 4-1, BGW320-505 ONT connections

(p. 36). Figure 4-1 BGW320-505 ONT connections Connect the Ethernet cables to the ONT and GE ports; see Figure 4-1, BGW320-505 ONT connections (p. 37) for the location of these ports. Connect a telephone to the RJ-14 POTS port. Contact your service provider for details, especially if you have an alarm system. June 2022 Issue 3 2022 Nokia. Nokia Confidential Information Use subject to agreed restrictions on disclosure and use. 3FE-47753-AAAA-TCZZA 37 Install or replace a BGW320-505 indoor ONT Install a BGW320-505 indoor ONT BGW320-505 5 6 7 8 9 10 11 DANGER Hazard Fiber cables transmit invisible laser light. To avoid eye damage or blindness, never look directly into fibers, connectors, or adapters. WARNING Equipment Damage Be careful to maintain a bend radius of no less than 1.5 in. (3.8 cm) when connecting the fiber optic cable. Too small of a bend radius in the cable can result in damage to the optic fiber. Connect the fiber optic cable with an SFP adapter into the SFP+ connector; see Figure 4-1, BGW320-505 ONT connections (p. 37) for the location of the SFP connector. Note: Fiber cable preparation varies depending on the type and size of the inside or outside plant fiber cable being spliced to the SC/APC fiber optic pigtail cable. Install the power supply according to manufacturer specifications. Note: Observe the following:

Units must be powered by a Listed or CE approved and marked limited power source power supply with a minimum output rate of 12VDC, 4A. Power up the ONT unit by inserting the power cable. If applicable, use the WPS button to connect additional Wi-Fi devices to the ONT. Verify the ONT LEDs; see 3.6 BGW320-505 service LED (p. 29) for a description of the LEDs. Test the services by connecting to your device (cell phone, laptop, or computer) and access a well known web-site. If necessary, reset the ONT. a. Locate the Reset button on a BGW320-505 indoor ONT as shown in Figure 4-1, BGW320-

2022 Nokia. Nokia Confidential Information Use subject to agreed restrictions on disclosure and use. 38 3FE-47753-AAAA-TCZZA June 2022 Issue 3 Install or replace a BGW320-505 indoor ONT Replace a BGW320-505 indoor ONT BGW320-505 505 ONT connections (p. 40). b. Press the Reset button for less than 10 seconds to reboot the ONT. Press the Reset button for 10 seconds to reset the ONT to its factory defaults. END OF STEPS 4.5 Replace a BGW320-505 indoor ONT 1 2 Deactivate the ONT services at the P-OLT. If you are using the SLID feature, this step is not required. The ONT and the services can remain in service (IS). a. Use the RTRV-ONT command to verify the ONT status and th associated services. Record the serial number or the SLID of the ONT displayed in the command output. Example:

RTRV-ONT::ONT-1-1-1-1-1;

b. If the ONT is in service, place the ONT in OOS state. Example:

ED-ONT::ONT-1-1-1-1-1;

Power down the unit by disconnecting the power cable; see Figure 4-2, BGW320-505 ONT connections (p. 38) for the power input. June 2022 Issue 3 2022 Nokia. Nokia Confidential Information Use subject to agreed restrictions on disclosure and use. 3FE-47753-AAAA-TCZZA 39 Install or replace a BGW320-505 indoor ONT Replace a BGW320-505 indoor ONT BGW320-505 Figure 4-2 BGW320-505 ONT connections Disconnect the telephone from the RJ-14 POTS port. 3 4 DANGER Hazard Fiber cables transmit invisible laser light. To avoid eye damage or blindness, never look directly into fibers, connectors, or adapters. Disconnect the fiber optic cable with an SFP adapter from the SFP+ connector. a. Unplug the fiber optic cable from the SFP+ connector. b. Attach a fiber dust cover to the end of the SFP+ connector. 2022 Nokia. Nokia Confidential Information Use subject to agreed restrictions on disclosure and use. 40 3FE-47753-AAAA-TCZZA June 2022 Issue 3 Install or replace a BGW320-505 indoor ONT Replace a BGW320-505 indoor ONT BGW320-505 5 6 7 8 9 10 11 Replace the ONT with a new unit. For details, Chapter 4, Install or replace a BGW320-505 indoor ONT. Connect the Ethernet cables to the ONT and GE ports; see Figure 4-2, BGW320-505 ONT connections (p. 40) for the location of these ports. Connect a telephone to the RJ-14 POTS port. Contact your service provider for details, especially if you have an alarm system. DANGER Hazard Fiber cables transmit invisible laser light. To avoid eye damage or blindness, never look directly into fibers, connectors, or adapters. WARNING Equipment Damage Be careful to maintain a bend radius of no less than 1.5 in. (3.8 cm) when connecting the fiber optic cable. Too small of a bend radius in the cable can result in damage to the optic fiber. Connect the fiber optic cable with the SFP adapter into the SFP connector. Figure 4-2, BGW320-505 ONT connections (p. 40) shows the location of the fiber optic connector. Install the power supply according to manufacturer specifications. Note: Observe the following:

Units must be powered by a Listed or CE approved and marked limited power source power supply with a minimum output rate of 12VDC, 4A. Power up the unit by connecting the power cable; see Figure 4-2, BGW320-505 ONT connections (p. 40) for the location of the power input. If applicable, press the WPS button to enable the WPS discovery mode on new WiFi devices. June 2022 Issue 3 2022 Nokia. Nokia Confidential Information Use subject to agreed restrictions on disclosure and use. 3FE-47753-AAAA-TCZZA 41 Install or replace a BGW320-505 indoor ONT Replace a BGW320-505 indoor ONT BGW320-505 Verify the ONT LEDs, voltage status, and optical signal levels; see the Nokia ONT/CPE Hardware and Cabling Installation Guide. Activate and test the services by connecting to your device (cell phone, laptop, or computer) and access a well known web-site. 12 13 14 If necessary, reset the ONT. a. Locate the Reset button on a BGW320-505 indoor ONT as shown in Figure 4-2, BGW320-

505 ONT connections (p. 40). b. Press the Reset button for less than 10 seconds to reboot the ONT. Press the Reset button for 10 seconds to reset the ONT to its factory defaults. END OF STEPS 2022 Nokia. Nokia Confidential Information Use subject to agreed restrictions on disclosure and use. 42 3FE-47753-AAAA-TCZZA June 2022 Issue 3

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6214988.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case Label and location (bottom of the device)

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6214991.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case Nokia Shanghai Bell Co. Ltd. No. 388, Ningqiao Rd. Pilot Free Trade Zone Shanghai , China 201206 Confidential Letter Date: 2022/8/3 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID2ADZRBGW321 To Whom It May Concern:

Long Term Confidentiality Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby respectfully request confidential treatment of information accompanying this application as outlined below:

Block Diagrams Schematics Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We understand that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Short Term Confidentiality Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby respectfully request short-term confidential treatment of information accompanying this application as outlined below until 180 days after the Grant Date of Equipment Authorization in order to ensure sensitive business information remains confidential until the actual marketing of the device:

External Photos Internal Photos Test Setup photos Users Manuals Respectfully, Applicants company name

: Nokia Shanghai Bell Co. Ltd. Applicants company address

: No. 388, Ningqiao Rd. Pilot Free Trade Zone Shanghai , China 201206 Signature

Name and Job Title

: Yong Tu / Hardware Advisory Engineer E-Mail Tel Fax

: yong.tu@nokia-sbell.com

: 86-21-38439795

: 86-21-38430001-1119

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6214987.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case Nokia Shanghai Bell Co. Ltd. No. 388, Ningqiao Rd. Pilot Free Trade Zone Shanghai , China 201206 Power of Attorney Date: 2022/8/3 Dear Sir, I hereby have entrusted the following person to be a proxy regarding application for Type Certification. Sporton International Inc. Hsinchu Laboratory Address

: No.8, Lane 724, Bo-ai St., Jhubei City, HsinChu County 302, Taiwan, R.O.C. Name

Leo Huang Job Title

: Manager e-mail

Leohuang@sporton.com.tw I am therefore responsible for the contents of the application. FCC ID: 2ADZRBGW321 Respectfully, Applicants company name

: Nokia Shanghai Bell Co. Ltd. Applicants company address

: No. 388, Ningqiao Rd. Pilot Free Trade Zone Shanghai , China 201206 Signature

Name and Job Title

: Yong Tu / Hardware Advisory Engineer E-Mail Tel Fax

: yong.tu@nokia-sbell.com

: 86-21-38439795

: 86-21-38430001-1119

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/6214993.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case Nokia Shanghai Bell Co. Ltd. No. 388, Ningqiao Rd. Pilot Free Trade Zone Shanghai , China 201206 TPC Declaration Letter Date: 2022/8/3 FCC ID2ADZRBGW321 To Whom It May Concern:

We, Nokia Shanghai Bell Co. Ltd., declare that the device supports the TPC function in final F/W when EUT is sold to FCC market. Respectfully, Applicants company name

: Nokia Shanghai Bell Co. Ltd. Applicants company address

: No. 388, Ningqiao Rd. Pilot Free Trade Zone Shanghai , China 201206 Signature

Name and Job Title

: Yong Tu / Hardware Advisory Engineer E-Mail Tel Fax

: yong.tu@nokia-sbell.com

: 86-21-38439795

: 86-21-38430001-1119