FCC ID: 2ADZR4G05A FastMile 4G Receiver

Nokia FastMile 4G Receiver Product Overview FastMile 2.1 Nokia FastMile 4G Receiver Product Overview 3TG-00386-ABAA-TCZZA Issue: 01 DRAFT September 2019 Nokia Proprietary and confidential Use pursuant to applicable agreements DRAFT Nokia is a registered trademark of Nokia Corporation. Other products and company names mentioned herein may be trademarks or tradenames of their respective owners. Nokia FastMile 4G Receiver Product Overview The information presented is subject to change without notice. No responsibility is assumed for inaccuracies contained herein. 2019 Nokia. Contains proprietary/trade secret information which is the property of Nokia and must not be made available to, or copied or used by anyone outside Nokia without its written authorization. Not to be used or disclosed except in accordance with applicable agreements. 2 3TG-00386-ABAA-TCZZA Issue: 01 DRAFT DRAFT Nokia FastMile 4G Receiver Product Overview Preface 1 Preface 1.1 Scope 1.2 Audience This preface provides general information about the Product Overview for the Nokia FastMile 4G Receiver. This document provides an overview of the Nokia FastMile 4G Receiver along with information about safety and troubleshooting the Nokia FastMile 4G Receiver. This document is intended for planners, administrators, operators, and maintenance personnel involved in installing, upgrading, or maintaining the Nokia FastMile 4G Receiver. 1.3 Required knowledge The reader must be familiar with general telecommunications principles. 1.4 Acronyms and initialisms The expansions and optional descriptions of most acronyms and initialisms used in this document appear in the glossary at the back of the document. 1.5 Assistance and ordering phone numbers Nokia provides global technical support through regional call centers. Phone numbers for the regional call centers are available at the following URL:

http://support.alcatel-lucent.com. For ordering information, contact your Nokia sales representative. Issue: 01 DRAFT 3TG-00386-ABAA-TCZZA 3 DRAFT Preface Nokia FastMile 4G Receiver Product Overview 1.6 Nokia quality processes Nokias FastMile 4G Receiver quality practices are in compliance with TL 9000 requirements.These requirements are documented in the Fixed Networks Quality Manual 3FQ-30146-6000-QRZZA. The quality practices adequately ensure that technical requirements and customer end-point requirements are met. The customer or its representatives may be allowed to perform on-site quality surveillance audits, as agreed upon during contract negotiations. 1.7 Safety information For safety information, see the appropriate safety guideline chapters. 1.8 Documents Documents are available from Nokia using OnLine Customer Support (OLCS). Procedure 1 To access a document on OLCS Individual PDFs of customer documents are accessible through OLCS. 1 Navigate to http://support.alcatel-lucent.com and enter your user name and password. If you are a new user and require access to this service, please contact your Nokia sales representative. From the Product information drop-down menu, select FastMile Home Unit as the product and click on Submit. From the Select release drop-down menu, select the appropriate release and click on Submit. 2 3 4 Click on the PDF to open or save the file. 1.9 Special information The following are examples of how special information is presented in this document. 4 3TG-00386-ABAA-TCZZA Issue: 01 DRAFT DRAFT Nokia FastMile 4G Receiver Product Overview Preface Danger Danger indicates that the described activity or situation may result in serious personal injury or death; for example, high voltage or electric shock hazards. Warning Warning indicates that the described activity or situation may, or will, cause equipment damage or serious performance problems. Caution Caution indicates that the described activity or situation may, or will, cause service interruption. Note A note provides information that is, or may be, of special interest. 1.9.1 Steps with options or substeps When there are options in a step, they are identified by letters. When there are required substeps in a step, they are identified by roman numerals. Procedure 2 Example of options in a step At step 1, you must choose option a or b. 1This step offers two options. You must choose one of the following:

a This is one option. b This is another option. Issue: 01 DRAFT 3TG-00386-ABAA-TCZZA 5 DRAFT Preface Nokia FastMile 4G Receiver Product Overview 2 You must perform this step. Procedure 3 Example of required substeps in a step At step 1, you must perform a series of substeps within the step. 1 This step has a series of substeps that you must perform to complete the step. You must perform the following substeps: i This is the first substep. ii This is the second substep. iii This is the third substep. 2 You must perform this step. 1.10 Multiple PDF document search You can use Adobe Reader Release 6.0 and later to search multiple PDF files for a common term. Adobe Reader displays the results in a single display panel. The results are grouped by PDF file, and you can expand the entry for each file. Note The PDF files in which you search must be in the same folder. Procedure 4 To search multiple PDF files for a common term 1 Open Adobe Acrobat Reader. 2 Choose EditSearch from the Acrobat Reader main menu. The Search PDF panel appears. 3 Enter the search criteria. 4 Click on the All PDF Documents In radio button. 5 Select the folder in which to search using the drop-down menu. 6 3TG-00386-ABAA-TCZZA Issue: 01 DRAFT DRAFT Nokia FastMile 4G Receiver Product Overview Preface 6 Click on the Search button. Acrobat Reader displays the search results. You can expand the entries for each document by clicking on the + symbol. Issue: 01 DRAFT 3TG-00386-ABAA-TCZZA 7 DRAFT Preface Nokia FastMile 4G Receiver Product Overview 8 3TG-00386-ABAA-TCZZA Issue: 01 DRAFT DRAFT Nokia FastMile 4G Receiver Product Overview ETSI environmental and CRoHS guidelines 2 ETSI environmental and CRoHS guidelines This chapter provides information about the ETSI environmental China Restriction of Hazardous Substances (CRoHS) regulations that govern the installation and operation of Nokia FastMile 4G Receiver equipment. This chapter also includes environmental operation parameters of general interest. 2.1 Environmental labels This section describes the environmental instructions that are provided with the customer documentation, equipment, and location where the equipment resides. 2.1.1 Overview CRoHS is applicable to Electronic Information Products (EIP) manufactured or sold and imported in the territory of the mainland of the Peoples Republic of China. EIP refers to products and their accessories manufactured by using electronic information technology, including electronic communications products and such subcomponents as batteries and cables. 2.1.2 Environmental related labels Environmental labels are located on appropriate equipment. The following are sample labels. 2.1.2.1 Value (MCV) label Products below Maximum Concentration Figure 1 shows the label that indicates a product is below the maximum concentration value, as defined by standard SJ/T11363-2006 (Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products). Products with this label are recyclable. The label may be found in this documentation or on the product. Issue: 01 DRAFT 3TG-00386-ABAA-TCZZA 9 DRAFT ETSI environmental and CRoHS guidelines Nokia FastMile 4G Receiver Product Overview Figure 1 Products below MCV value label 18986 2.1.2.2 Products containing hazardous substances above Maximum Concentration Value (MCV) label Figure 2 shows the label that indicates a product is above the maximum concentration value, as defined by standard SJ/T11363-2006 (Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products). The number contained inside the label indicates the Environment-

Friendly User Period (EFUP) value. The label may be found in this documentation or on the product. Figure 2 Products above MCV value label 10 3TG-00386-ABAA-TCZZA Issue: 01 DRAFT DRAFT Nokia FastMile 4G Receiver Product Overview ETSI environmental and CRoHS guidelines 18985 Together with major international telecommunications equipment companies, Nokia has determined it is appropriate to use an EFUP of 50 years for network infrastructure equipment and an EFUP of 20 years for handsets and accessories. These values are based on manufacturers' extensive practical experience of the design, manufacturing, maintenance, usage conditions, operating environments, and physical condition of infrastructure and handsets after years of service. The values reflect minimum values and refer to products operated according to the intended use conditions. See Hazardous Substances Table (HST) for more information. 2.2 Hazardous Substances Table (HST) This section describes the compliance of the Nokia FastMile 4G Receiver equipment to the CRoHS standard when the product and subassemblies contain hazardous substances beyond the MCV value. This information is found in this user documentation where part numbers for the product and subassemblies are listed. It may be referenced in other documentation that describes the Nokia FastMile 4G Receiver equipment. In accordance with the Peoples Republic of China Electronic Industry Standard Marking for the Control of Pollution Caused by Electronic Information Products

(SJ/T11364-2006), customers may access the Nokia Hazardous Substance Table, in Chinese, from the following location:

http://www.alcatel-sbell.com.cn/wwwroot/images/upload/private/1/media/ChinaRo HS.pdf 2.3 Other environmental requirements Observe the following environmental requirements when handling Nokia FastMile 4G Receiver equipment. 2.3.1 Environmental requirements See chapter 16 in this document for more information about temperature ranges for the Nokia FastMile 4G Receiver equipment and other Nokia FastMile 4G Receiver specifications. Issue: 01 DRAFT 3TG-00386-ABAA-TCZZA 11 DRAFT ETSI environmental and CRoHS guidelines Nokia FastMile 4G Receiver Product Overview 2.3.2 Storage According to ETS 300-019-1-1 - Class 1.1, storage of Nokia FastMile 4G Receiver equipment must be in Class 1.1, weather-protected, temperature-controlled locations. 2.3.3 Transportation According to EN 300-019-1-2 - Class 2.3, transportation of Nokia FastMile 4G Receiver equipment must be in packed, public transportation. 2.3.4 Stationary use According to EN 300-019-1-3 - Class 3.1/3.2/3.E, stationary use of Nokia FastMile 4G Receiver equipment must be in a temperature-controlled location with no condensation allowed. 2.3.5 Thermal limitations The thermal limitations for the Nokia FastMile 4G Receiver equipment are:

operating temperature (ambient):

Compact mono-band and ABA models: 30C to 65C (22F to 149F) Compact multi-band models: 30C to 55C (22F to 131F) operating relative humidity: 5% to 85% relative humidity, non-condensing short-term relative humidity: 5% to 93% relative humidity, non-condensing 2.3.6 Material content compliance European Union (EU) Directive 2002/95/EC, Restriction of the use of certain Hazardous Substances (RoHS), restricts the use of lead, mercury, cadmium, hexavalent chromium, and certain flame retardants in electrical and electronic equipment. This Directive applies to electrical and electronic products placed on the EU market after 1 July 2006, with various exemptions, including an exemption for lead solder in network infrastructure equipment. Nokia products shipped to the EU after 1 July 2006 comply with the EU RoHS Directive. 12 3TG-00386-ABAA-TCZZA Issue: 01 DRAFT DRAFT Nokia FastMile 4G Receiver Product Overview ETSI environmental and CRoHS guidelines is described in: Nokia process Nokia has implemented a material/substance content management process. The process for ensuring RoHS Compliance

(1AA002660031ASZZA). This ensures compliance with the European Union Directive 2011/65/EU on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment (RoHS2). With the process equipment is assessed in accordance with the Harmonised Standard EN50581:2012

(CENELEC) on Technical documentation for the assessment of electrical and electronic products with respect to the restriction of hazardous substances. 2.3.7 End-of-life collection and treatment Electronic products bearing or referencing the symbol shown in Figure 3, when put on the market within the European Union (EU), shall be collected and treated at the end of their useful life, in compliance with applicable EU and local legislation. They shall not be disposed of as part of unsorted municipal waste. Due to materials that may be contained in the product, such as heavy metals or batteries, the environment and human health may be negatively impacted as a result of inappropriate disposal. Figure 3 Recycling/take back/disposal of product symbol At the end of its life, Nokia FastMile 4G Receiver equipment is subject to the applicable local legislations that implement the European Directive 2012/19EU on waste electrical and electronic equipment (WEEE). There can be different requirements for collection and treatment in different member states of the European Union. In compliance with legal requirements and contractual agreements, where applicable, Nokia will offer to provide for the collection and treatment of Nokia products bearing the logo shown in Figure 3 at the end of their useful life, or products displaced by Nokia equipment offers. For information regarding take-back of equipment by Nokia, or for more information regarding the requirements for recycling/disposal of product, contact your Nokia account manager or Nokia take back support at sustainability.global@nokia.com. Issue: 01 DRAFT 3TG-00386-ABAA-TCZZA 13 DRAFT ETSI environmental and CRoHS guidelines Nokia FastMile 4G Receiver Product Overview 2.4 Additional information See chapter 17 for RF exposure information. 14 3TG-00386-ABAA-TCZZA Issue: 01 DRAFT DRAFT Nokia FastMile 4G Receiver Product Overview ETSI safety guidelines 3 ETSI safety guidelines This chapter provides information about the mandatory regulations that govern the installation and operation of Nokia FastMile 4G Receiver equipment in the ETSI market. 3.1 Safety instructions This section describes the safety instructions that are provided in the customer documentation and on the Nokia FastMile 4G Receiver equipment. 3.1.1 Safety instruction boxes The safety instruction boxes are provided in the Nokia FastMile 4G Receiver customer documentation. Observe the instructions to meet safety requirements. The following is an example of the Danger box. Danger Possibility of personal injury. The Danger box indicates that the described activity or situation may pose a threat to personal safety. It calls attention to a situation or procedure which, if not correctly performed or adhered to, may result in death or serious physical harm. Do not proceed beyond a Danger box until the indicated conditions are fully understood and met. The following is an example of the Warning box. Warning 1 Possibility of equipment damage. Warning 2 Possibility of data loss. The Warning box indicates that the described activity or situation may, or will, cause equipment damage, loss of data, or serious performance problems. It identifies a possible equipment-damaging situation or provides essential information to avoid the degradation of system operations or data. Issue: 01 DRAFT 3TG-00386-ABAA-TCZZA 15 DRAFT ETSI safety guidelines Nokia FastMile 4G Receiver Product Overview Do not proceed beyond a warning until the indicated conditions are fully understood and met. The following is an example of the Caution box. Caution 1 Possibility of service interruption. Caution 2 Service interruption. The Caution box indicates that the described activity or situation may, or will, cause service interruption. Do not proceed beyond a caution until the indicated conditions are fully understood and met. The following is an example of the Note box. Note Information of special interest. The Note box provides information that assists the personnel working with Nokia FastMile 4G Receiver equipment. It does not provide safety-related instructions. 3.1.2 Safety-related labels The Nokia FastMile 4G Receiver equipment is labeled with the specific safety instructions and compliance information that is related to a product, or product variant or model, of the equipment. Observe the instructions on the safety labels. Table 1 provides sample safety labels on Nokia FastMile 4G Receiver equipment. Table 1 Description Safety labels Label text ESD warning Caution: This assembly contains an electrostatic sensitive device. 3.2 Safety standards compliance This section describes Nokia FastMile 4G Receiver equipment compliance with the European safety standards. 16 3TG-00386-ABAA-TCZZA Issue: 01 DRAFT DRAFT Nokia FastMile 4G Receiver Product Overview ETSI safety guidelines 3.2.1 EMC compliance The Nokia FastMile 4G Receiver equipment complies with the following EMC requirements:

Electromagnetic compatibility of multimedia equipment - Emission requirements CISPR 32, EN 55032 CISPR 35, EN55035 Electromagnetic compatibility of multimedia equipment - Immunity requirements Electromagnetic Compatibility (EMC) standard for radio equipment and services;

Part 1: Common technical requirements; Harmonized Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU and the essential requirements of article 6 of Directive 2014/30/EU EN 301489-1 Electromagnetic Compatibility (EMC) standard for radio equipment and services;

Part 17: Specific conditions for Broadband Data Transmission Systems;

Harmonized Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU EN 301489-17 3.2.2 Equipment safety standard compliance The Nokia FastMile 4G Receiver equipment complies with the requirements of the following:

EN 60950-1, Safety of Information Technology Equipment for use in a restricted location (per R-269) IEC 60950-22, EN 60950-22: Information Technology Equipment- Safety - Part 22 Equipment to be installed Outdoors 3.2.3 Environmental standard compliance The Nokia FastMile 4G Receiver equipment complies with the EN 300 019 European environmental standards. 3.2.4 Laser product standard compliance The Nokia FastMile 4G Receiver equipment is not a laser product. Issue: 01 DRAFT 3TG-00386-ABAA-TCZZA 17 DRAFT ETSI safety guidelines Nokia FastMile 4G Receiver Product Overview 3.3 Electrical safety guidelines This section provides the electrical safety guidelines for the Nokia FastMile 4G Receiver equipment. Note 1 The Nokia FastMile 4G Receiver equipment complies with the U.S. National Electrical Code. However, local electrical authorities have jurisdiction when there are differences between the local and U.S. standards. Note 2 The Nokia FastMile 4G Receiver equipment complies with BS EN 61140. 3.3.1 Power supplies The use of any non-Nokia approved power supplies or power adapters is not supported or endorsed by Nokia. Such use will void any warranty or support contract with Nokia. Such use greatly increases the danger of damage to equipment or property. 3.3.2 Cabling The following are the guidelines regarding cables used for the Nokia FastMile 4G Receiver equipment:

All cables must be approved by the relevant national electrical code. Cables for outdoor connection to the Nokia FastMile 4G Receiver equipment The Nokia FastMile 4G Receiver equipment must be used with the cabling must be suitable for outdoor use. supplied with the equipment. 3.3.3 Protective earth Earthing and bonding of the Nokia FastMile 4G Receiver equipment must comply with the requirements of local electrical codes. 18 3TG-00386-ABAA-TCZZA Issue: 01 DRAFT DRAFT Nokia FastMile 4G Receiver Product Overview ETSI safety guidelines 3.4 ESD safety guidelines The Nokia FastMile 4G Receiver equipment is sensitive to ESD if opened. Operations personnel must observe the following ESD instructions when they handle the Nokia FastMile 4G Receiver equipment. Caution This equipment is ESD sensitive if opened. Proper ESD protections should be used if you open the Nokia FastMile 4G Receiver. Service personnel are not required to wear wrist straps when performing normal installation or maintenance activities. 3.5 Environmental requirements See chapter 16 in this document for information about temperature ranges for the Nokia FastMile 4G Receiver equipment and other Nokia FastMile 4G Receiver specifications. During operation in the supported temperature range, condensation inside the Nokia FastMile 4G Receiver equipment caused by humidity is not an issue because the Nokia FastMile 4G Receiver is a sealed unit. 3.6 Additional information See chapter 17 for RF exposure information. Issue: 01 DRAFT 3TG-00386-ABAA-TCZZA 19 DRAFT ANSI safety guidelines Nokia FastMile 4G Receiver Product Overview 4 ANSI safety guidelines This chapter provides information about the mandatory regulations that govern the installation and operation of the Nokia FastMile 4G Receiver equipment in the North American or ANSI market. 4.1 Safety instructions This section describes the safety instructions that are provided in the customer documentation and on the Nokia FastMile 4G Receiver equipment. 4.1.1 Safety instruction boxes in customer documentation The safety instruction boxes are provided in the Nokia FastMile 4G Receiver customer documentation. Observe the instructions to meet safety requirements. The following is an example of the Danger box. Danger Possibility of personal injury. The Danger box indicates that the described activity or situation may pose a threat to personal safety. It calls attention to a situation or procedure which, if not correctly performed or adhered to, may result in death or serious physical harm. Do not proceed beyond a Danger box until the indicated conditions are fully understood and met. The following is an example of the Warning box. Warning 1 Possibility of equipment damage. Warning 2 Possibility of data loss. The Warning box indicates that the described activity or situation may, or will, cause equipment damage, loss of data, or serious performance problems. It identifies a possible equipment-damaging situation or provides essential information to avoid the degradation of system operations or data. 20 3TG-00386-ABAA-TCZZA Issue: 01 DRAFT DRAFT Nokia FastMile 4G Receiver Product Overview ANSI safety guidelines Do not proceed beyond a warning until the indicated conditions are fully understood and met. The following is an example of the Caution box. Caution 1 Possibility of service interruption. Caution 2 Service interruption. The Caution box indicates that the described activity or situation may, or will, cause service interruption. Do not proceed beyond a caution until the indicated conditions are fully understood and met. The following is an example of the Note box. Note Information of special interest. The Note box provides information that assists the personnel working with Nokia FastMile 4G Receiver equipment. It does not provide safety-related instructions. 4.1.2 Safety-related labels The Nokia FastMile 4G Receiver equipment is labeled with specific safety compliance information and instructions that are related to a product, or product model, of the equipment. Observe the instructions on the safety labels. Table 2 provides examples of the text in the various Nokia FastMile 4G Receiver equipment safety labels. Table 2 Description UL compliance Safety labels Label text ETL/cETL UL50E compliance Type 3 ESD warning Caution: This assembly contains electrostatic sensitive device. FCC standards compliance Tested to comply with FCC standards for home or office use. Operation conditions This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Issue: 01 DRAFT 3TG-00386-ABAA-TCZZA 21 DRAFT ANSI safety guidelines Nokia FastMile 4G Receiver Product Overview CE marking There are various CE symbols for CE compliance. Figure 4 shows a sample safety label for FCC and Figure 5 shows a sample safety label for ETL. Figure 4 Sample safety label for FCC Tested to Comply with FCC Standards FOR HOME OR OFFICE USE COMMUNICATION SERVICE EQUIPMENT cUS LISTED 27FY Type 3R Enclosure - Rainproof This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numerique de la class A est conforme a la norme NMB-

003 du Canada CAUTION This Assembly Contains Electrostatic Sensitive Devices Figure 5 Sample safety label for ETL 5011710 18533 27799 4.2 Safety standards compliance This section describes the Nokia FastMile 4G Receiver equipment compliance with North American safety standards. Warning Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 22 3TG-00386-ABAA-TCZZA Issue: 01 DRAFT DRAFT Nokia FastMile 4G Receiver Product Overview ANSI safety guidelines 4.2.1 EMC, EMI, and ESD compliance The Nokia FastMile 4G Receiver equipment complies with the following EMC, EMI, and ESD requirements:

Federal Communications Commission PART 15-RADIO FREQUENCY DEVICES Subpart C-INTENTIONAL RADIATORS Title 47 CFR Part 15. Part 15.247, Part 15.255 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the Increase the separation between the equipment and receiver. receiver is needed. Consult the dealer or an experienced radio/TV technician for help. 4.2.2 Equipment safety standard compliance The Nokia FastMile 4G Receiver equipment complies with the requirements of:

UL62368-1, Outdoor ONTs to Communication Service Equipment (CSE) and Indoor ONTs to Information Technology Equipment (ITE) Information Technology Equipment- Safety - Part 22 Equipment to be installed Outdoors UL 60950-22 4.3 Electrical safety guidelines This section provides the electrical safety guidelines for the Nokia FastMile 4G Receiver equipment. Issue: 01 DRAFT 3TG-00386-ABAA-TCZZA 23 DRAFT ANSI safety guidelines Nokia FastMile 4G Receiver Product Overview Note The Nokia FastMile 4G Receiver equipment complies with the U.S. National Electrical Code. However, local electrical authorities have jurisdiction when there are differences between the local and U.S. standards. 4.3.1 Power supplies The use of any non-Nokia approved power supplies or power adapters is not supported or endorsed by Nokia. Such use will void any warranty or support contract with Nokia. Such use greatly increases the danger of damage to equipment or property. 4.3.2 Cabling The following are the guidelines regarding cables used for the Nokia FastMile 4G Receiver equipment:

All cables must be approved by the relevant national electrical code. Cables for outdoor connection to the Nokia FastMile 4G Receiver equipment The Nokia FastMile 4G Receiver equipment must be used with the cabling must be suitable for outdoor use. supplied with the equipment. 4.3.3 Protective earth Earthing and bonding of the Nokia FastMile 4G Receiver equipment must comply with the requirements of NEC article 250 or local electrical codes. 4.4 ESD safety guidelines The Nokia FastMile 4G Receiver equipment is sensitive to ESD if opened. Operations personnel must observe the following ESD instructions when they handle the Nokia FastMile 4G Receiver equipment. Caution This equipment is ESD sensitive if opened. Proper ESD protections should be used if you open the Nokia FastMile 4G Receiver. 24 3TG-00386-ABAA-TCZZA Issue: 01 DRAFT DRAFT Nokia FastMile 4G Receiver Product Overview ANSI safety guidelines Service personnel are not required to wear wrist straps when performing normal installation or maintenance activities. 4.5 Environmental requirements See chapter 16 in this document for information about temperature ranges for the Nokia FastMile 4G Receiver equipment and other Nokia FastMile 4G Receiver specifications. During operation in the supported temperature range, condensation inside the Nokia FastMile 4G Receiver equipment caused by humidity is not an issue because the Nokia FastMile 4G Receiver is a sealed unit. 4.6 Additional information See chapter 17 for RF exposure information. See chapter 18 for additional FCC compliance information. Issue: 01 DRAFT 3TG-00386-ABAA-TCZZA 25 DRAFT Nokia FastMile 4G Receiver Product Overview Table of contents 1 Preface ............................................................................................................... 3 1.1 Scope................................................................................................................................ 3 1.2 Audience ........................................................................................................................... 3 1.3 Required knowledge ......................................................................................................... 3 1.4 Acronyms and initialisms .................................................................................................. 3 1.5 Assistance and ordering phone numbers ......................................................................... 3 1.6 Nokia quality processes.................................................................................................... 4 1.7 Safety information ............................................................................................................. 4 1.8 Documents ....................................................................................................................... 4 1.9 Special information ........................................................................................................... 4 1.9.1 Steps with options or substeps ...................................................................................... 5 1.10 Multiple PDF document search ...................................................................................... 6 2 ETSI environmental and CRoHS guidelines .................................................... 9 2.1 Environmental labels ........................................................................................................ 9 2.1.1 Overview ........................................................................................................................ 9 2.1.2 Environmental related labels ......................................................................................... 9 2.1.2.1 Products below Maximum Concentration Value (MCV) label .................................... 9 2.1.2.2 Products containing hazardous substances above Maximum ................................ 10 Concentration Value (MCV) label ............................................................... 10 2.2 Hazardous Substances Table (HST) .............................................................................. 11 2.3 Other environmental requirements ................................................................................. 11 2.3.1 Environmental requirements ....................................................................................... 11 2.3.2 Storage ........................................................................................................................ 12 2.3.3 Transportation ............................................................................................................. 12 2.3.4 Stationary use .............................................................................................................. 12 2.3.5 Thermal limitations ...................................................................................................... 12 2.3.6 Material content compliance ........................................................................................ 12 2.3.7 End-of-life collection and treatment ............................................................................. 13 2.4 Additional information ..................................................................................................... 14 3 ETSI safety guidelines .................................................................................... 15 3.1 Safety instructions .......................................................................................................... 15 3.1.1 Safety instruction boxes .............................................................................................. 15 3.1.2 Safety-related labels .................................................................................................... 16 3.2 Safety standards compliance ......................................................................................... 16 3.2.1 EMC compliance ......................................................................................................... 17 3.2.2 Equipment safety standard compliance ...................................................................... 17 3.2.3 Environmental standard compliance ........................................................................... 17 3.2.4 Laser product standard compliance ............................................................................ 17 3.3 Electrical safety guidelines ............................................................................................. 18 3.3.1 Power supplies ............................................................................................................ 18 3.3.2 Cabling ........................................................................................................................ 18 3.3.3 Protective earth ........................................................................................................... 18 3.4 ESD safety guidelines .................................................................................................... 19 3.5 Environmental requirements .......................................................................................... 19 3.6 Additional information ..................................................................................................... 19 26 3TG-00386-ABAA-TCZZA Issue: 01 DRAFT DRAFT Nokia FastMile 4G Receiver Product Overview 4 ANSI safety guidelines ................................................................................... 20 4.1 Safety instructions .......................................................................................................... 20 4.1.1 Safety instruction boxes in customer documentation .................................................. 20 4.1.2 Safety-related labels .................................................................................................... 21 4.2 Safety standards compliance ......................................................................................... 22 4.2.1 EMC, EMI, and ESD compliance ................................................................................ 23 4.2.2 Equipment safety standard compliance ...................................................................... 23 4.3 Electrical safety guidelines ............................................................................................. 23 4.3.1 Power supplies ............................................................................................................ 24 4.3.2 Cabling ........................................................................................................................ 24 4.3.3 Protective earth ........................................................................................................... 24 4.4 ESD safety guidelines .................................................................................................... 24 4.5 Environmental requirements .......................................................................................... 25 4.6 Additional information ..................................................................................................... 25 5 Product overview ............................................................................................ 34 5.1 Overview of the Nokia FastMile 4G Receiver................................................................. 34 5.2 End-to-end example ....................................................................................................... 36 6 Functional overview ....................................................................................... 38 6.1 Overview ......................................................................................................................... 38 6.1.1 Nokia Wireless app ...................................................................................................... 38 6.1.2 Web UI ......................................................................................................................... 39 6.1.3 Remote management .................................................................................................. 39 6.2 LTE characteristics ......................................................................................................... 39 6.3 Data forwarding .............................................................................................................. 40 6.4 Ethernet characteristics .................................................................................................. 40 6.5 Power supply characteristics .......................................................................................... 41 6.6 Remote management protocols ..................................................................................... 41 7 Model overview ............................................................................................... 44 7.1 Models of the Nokia FastMile 4G Receiver .................................................................... 44 7.1.1 Label information ......................................................................................................... 45 8 Physical interfaces ......................................................................................... 45 8.1 Physical interfaces of the Compact mono-band and ABA models ................................. 46 8.2 Physical interfaces of the Compact multi-band models ................................................. 47 9 SIM cards ......................................................................................................... 50 9.1 SIM card information for the Compact mono-band and ABA models ............................ 50 9.2 SIM card information for the Compact multi-band models ............................................. 51 10 LEDs .............................................................................................................. 51 10.1 Status LED ................................................................................................................... 52 10.2 Signal strength LEDs .................................................................................................... 53 11 Power information ........................................................................................ 55 11.1 Power information for the Nokia FastMile 4G Receiver ............................................... 55 12 Performance information ............................................................................. 56 12.1 Performance overview .................................................................................................. 56 12.2 Throughput information ................................................................................................ 56 12.3 Carrier aggregation information .................................................................................... 57 12.4 Power consumption information ................................................................................... 60 13 Management using the Nokia Wireless app ................................................ 62 13.1 Using the Nokia Wireless app to manage the Nokia FastMile 4G Receiver ................ 62 Issue: 01 DRAFT 3TG-00386-ABAA-TCZZA 27 DRAFT Nokia FastMile 4G Receiver Product Overview 13.2 Using the Nokia Wireless app to manage a unit managed by the Nokia Altiplano FastMile Controller ............................................................................................................... 62 13.3 Using the Nokia Wireless app to manage a unit managed by an ACS ........................ 81 14 Management using the Web UI .................................................................... 95 14.1 Using the Web UI to manage the Nokia FastMile 4G Receiver ................................... 95 14.2 Using the Web UI status screen ................................................................................... 95 14.3 Using the Web UI network screen ................................................................................ 97 14.4 Using the Web UI system screen ............................................................................... 109 15 Standards certification ............................................................................... 114 15.1 Standards certification for Compact mono-band and ABA models ............................ 114 15.2 Standards certification for the Compact multi-band models....................................... 115 16 Appendix A: Specifications ........................................................................ 115 16.1 Specifications ............................................................................................................. 115 17 Appendix B: RF exposure .......................................................................... 117 17.1 RF exposure ............................................................................................................... 117 18 Appendix C: FCC statements and label instructions ............................... 118 18.1 FCC compliance statement ........................................................................................ 118 18.2 FCC radiation exposure statement ............................................................................. 118 18.3 FCC label instructions ................................................................................................ 119 19 Glossary ...................................................................................................... 119 28 3TG-00386-ABAA-TCZZA Issue: 01 DRAFT DRAFT Nokia FastMile 4G Receiver Product Overview List of figures 2 Figure 1 Figure 2 Figure 3 4 Figure 4 Figure 5 5 Figure 6 Figure 7 Figure 8 6 Figure 9 Figure 10 8 Figure 11 Figure 12 Figure 13 9 Figure 14 Figure 15 10 Figure 16 Figure 17 Figure 18 Figure 19 13 Figure 20 Figure 21 Figure 22 ETSI environmental and CRoHS guidelines.................................9 Products below MCV value label...............................................................10 Products above MCV value label ..............................................................11 Recycling/take back/disposal of product symbol.......................................13 ANSI safety guidelines.................................................................21 Sample safety label for FCC......................................................................23 Sample safety label for ETL ......................................................................23 Product overview..........................................................................37 Application example of the Nokia FastMile 4G Receiver...........................38 Examples of model types of the Nokia FastMile 4G Receiver...................39 End-to-end example featuring the Nokia FastMile 4G Receiver with a residential gateway and POE injector.....................................................40 Functional overview .....................................................................41 Remote management of the Nokia FastMile 4G Receiver through the Nokia Altiplano FastMile Controller ....................................................45 Remote management of the Nokia FastMile 4G Receiver through an ACS......................................................................................................46 Physical interfaces .......................................................................49 Location of physical interfaces on the Compact mono-band and ABA models of the Nokia FastMile 4G Receiver...............................................50 Location of the ground point for the Compact multi-band models of the Nokia FastMile 4G Receiver................................................................51 Location of physical interfaces on the underside of the Compact multi-band models of the Nokia FastMile 4G Receiver .............................52 SIM cards.......................................................................................53 Detailed view of SIM card slot on the Compact mono-band and ABA models...............................................................................................53 Detailed view of SIM card slot on the Compact multi-band models ..........54 LEDs...............................................................................................55 Location of the status LED on the Compact mono-band and ABA models of the Nokia FastMile 4G Receiver...............................................55 Location of the status LED on the Compact multi-band models of the Nokia FastMile 4G Receiver................................................................55 Location of the signal strength LEDs.........................................................57 Location of the measurement button.........................................................57 Management using the Nokia Wireless app...............................67 Introductory screen for unit managed by the Nokia Altiplano FastMile Controller through NETCONF.....................................................69 Screen with prompt to scan the QR code for unit managed by the Nokia Altiplano FastMile Controller through NETCONF............................70 QR code screen for unit managed by the Nokia Altiplano FastMile Controller through NETCONF ...................................................................71 Issue: 01 DRAFT 3TG-00386-ABAA-TCZZA 29 DRAFT Nokia FastMile 4G Receiver Product Overview Screen showing the Already Installed option for unit managed by the Nokia Altiplano FastMile Controller through NETCONF......................72 Screen for connecting to the Nokia FastMile 4G Receiver........................73 Screen for enabling the VPN profile..........................................................74 Prompt for accepting the connection request............................................75 Screen to log in to a Nokia FastMile 4G Receiver managed by the Nokia Altiplano FastMile Controller ...........................................................76 System state screen example for a Nokia FastMile 4G Receiver managed by the Nokia Altiplano FastMile Controller.................................78 System state screen with Beam Angle information for a Nokia FastMile 4G Receiver managed by the Nokia Altiplano FastMile Controller. 79 Screen that has the Upload CA certificates option for a Nokia FastMile 4G Receiver managed by the Nokia Altiplano FastMile Controller. 80 Screen that lists the CA certificates for a Nokia FastMile 4G Receiver managed by the Nokia Altiplano FastMile Controller .................81 Screen indicating that uploading of the CA certificates was successful for a Nokia FastMile 4G Receiver managed by the Nokia Altiplano FastMile Controller ....................................................................................82 Screen showing the Reboot Device option for a Nokia FastMile 4G Receiver managed by the Nokia Altiplano FastMile Controller............83 Screen showing the reboot message for a Nokia FastMile 4G Receiver managed by the Nokia Altiplano FastMile Controller .................84 Screen showing the Perform Factory Reset option for a Nokia FastMile 4G Receiver managed by the Nokia Altiplano FastMile Controller. 85 Screen showing the factory reset message for a Nokia FastMile 4G Receiver managed by the Nokia Altiplano FastMile Controller .................86 Introductory screen for unit managed by an ACS through TR-069 ...........88 Screen with prompt to scan the QR code for unit managed by an ACS through TR-069.................................................................................89 QR code screen for unit managed by an ACS through TR-069................90 Screen showing the Already Installed option for unit managed by an ACS through TR-069............................................................................91 Screen for connecting to the Nokia FastMile 4G Receiver........................92 Screen for enabling the VPN profile..........................................................93 Prompt for accepting the connection request............................................94 Screen to log in to a Nokia FastMile 4G Receiver managed by an ACS through TR-069.................................................................................95 System state screen example for a Nokia FastMile 4G Receiver managed by an ACS .................................................................................97 System state screen with Beam Angle information for a Nokia FastMile 4G Receiver managed by an ACS..............................................98 Screen that has the Upload CA certificates option for a Nokia FastMile 4G Receiver managed by an ACS..............................................99 Screen showing the Reboot Device option for a Nokia FastMile 4G Receiver managed by an ACS ..........................................................100 Figure 23 Figure 24 Figure 25 Figure 26 Figure 27 Figure 28 Figure 29 Figure 30 Figure 31 Figure 32 Figure 33 Figure 34 Figure 35 Figure 36 Figure 37 Figure 38 Figure 39 Figure 40 Figure 41 Figure 42 Figure 43 Figure 44 Figure 45 Figure 46 Figure 47 Figure 48 14 Management using the Web UI..................................................101 30 3TG-00386-ABAA-TCZZA Issue: 01 DRAFT DRAFT Nokia FastMile 4G Receiver Product Overview Figure 49 Figure 50 Figure 51 Figure 52 Figure 53 Figure 54 Figure 55 Figure 56 Figure 57 Figure 58 Figure 59 Figure 60 Figure 61 Figure 62 Figure 63 Figure 64 Figure 65 Example of the Status screen when the FastMile 4G Receiver is not connected to a cell.............................................................................102 Example of the Status screen when the FastMile 4G Receiver is connected to a cell...................................................................................103 Example of the Login screen...................................................................105 Example of the Network screen...............................................................106 Example of scroll down for the Network screen ......................................107 Example of the Add Access Point window ..............................................108 Example of the Delete APN window........................................................109 Example of the Edit Location window......................................................110 Example of the Edit Controller window....................................................111 Example of the Edit DHCP window.........................................................112 Example of the Certificates information window......................................113 Example of the Add Cell window.............................................................114 Example of the Delete Cell window.........................................................115 Example of the System screen................................................................116 Example of the Restart Device confirmation window ..............................117 Example of the Restore Device confirmation window .............................118 Example of the screen that displays while firmware is being updated....................................................................................................119 Issue: 01 DRAFT 3TG-00386-ABAA-TCZZA 31 DRAFT Nokia FastMile 4G Receiver Product Overview 32 3TG-00386-ABAA-TCZZA Issue: 01 DRAFT DRAFT Nokia FastMile 4G Receiver Product Overview List of tables 3 Table 1 4 Table 2 6 Table 3 Table 4 7 Table 5 Table 6 8 Table 7 Table 8 10 Table 9 Table 10 12 Table 11 Table 12 Table 13 Table 14 Table 15 15 Table 16 Table 17 16 Table 18 18 Table 19 ETSI safety guidelines..................................................................15 Safety labels..............................................................................................16 ANSI safety guidelines.................................................................21 Safety labels..............................................................................................22 Functional overview .....................................................................41 E-UTRA bands supported by the Nokia FastMile 4G Receiver.................43 Data forwarding methods supported by the Nokia FastMile 4G Receiver ....................................................................................................43 Model overview.............................................................................47 Models of the Nokia FastMile 4G Receiver...............................................47 Label information for the Nokia FastMile 4G Receiver..............................48 Physical interfaces .......................................................................49 Physical interfaces of the Compact mono-band and ABA models of the Nokia FastMile 4G Receiver................................................................49 Physical interfaces of the Compact multi-band models of the Nokia FastMile 4G Receiver................................................................................50 LEDs...............................................................................................55 Status LED behavior for Nokia FastMile 4G Receiver managed from the Nokia Altiplano FastMile Controller.............................................56 Status LED behavior for Nokia FastMile 4G Receiver managed from an ACS......................................................................................................56 Performance information.............................................................61 LTE throughput information.......................................................................61 Carrier aggregation support for the Compact mono-band and ABA models ......................................................................................................62 Carrier aggregation support for Model 4G04-A.........................................63 Carrier aggregation support for Model 4G05-A.........................................64 Power consumption information for all models..........................................65 Standards certification...............................................................121 Standards certifications for the Nokia FastMile 4G Receiver Compact mono-band and ABA models...................................................121 Standards certifications for the Nokia FastMile 4G Receiver Compact multi-band models....................................................................122 Appendix A: Specifications .......................................................123 Specifications for the Nokia FastMile 4G Receiver .................................123 Appendix C: FCC statements and label instructions..............127 FCC ID for Nokia FastMile 4G Receiver..................................................127 Issue: 01 DRAFT 3TG-00386-ABAA-TCZZA 33 DRAFT Nokia FastMile 4G Receiver Product Overview Product overview 5 Product overview 5.1 Overview of the Nokia FastMile 4G Receiver 5.2 End-to-end example 5.1 Overview of the Nokia FastMile 4G Receiver The Nokia FastMile 4G Receiver is an outdoor device used in the Nokia FastMile 4G solution. The Nokia FastMile 4G solution uses 3GPP based LTE radio technology to provide indoor and outdoor broadband connectivity with guaranteed high bitrates in larger service areas in a more cost-efficient manner than is possible with other existing solutions.The Nokia FastMile 4G solution can overcome network performance challenges faced by today's mobile networks by optimizing all of the following:

intra site interference due to neighbor sectors in same LTE base station inter site interference due to neighbor base stations link performance due to wall penetration loss and several miles path loss The Nokia FastMile 4G Receiver provides high-performing, outdoor wireless broadband access over LTE to meet residential users total home connectivity needs for urban, suburban, rural, and deep rural spots. The Nokia FastMile 4G Receiver supports LTE connectivity to an LTE base station in the network, and provides 1 Gbps Ethernet connectivity through an Ethernet cable connected to a residential gateway such as the following in the home:

Nokia 7368 ISAM CPE A-020W-A Nokia 7368 ISAM CPE A-240Z-A The Nokia FastMile 4G Receiver can be installed on the side of a house or on a pole close to the house. A pole mount kit that includes a pole adapter can be ordered from Nokia. Figure 6 shows an application example where the Nokia FastMile 4G Receiver is mounted on the side of a house. Product overview 34 3TG-00386-ABAA-TCZZA Issue: 01 DRAFT DRAFT Nokia FastMile 4G Receiver Product Overview Figure 6 Application example of the Nokia FastMile 4G Receiver Radio basestation Nokia FastMile 4 G Receiver PoE Injector Residential gateway LTE Gbps 1 Ethernet Wi-Fi or Ethernet WiFi or Ethernet connectivity to end-user devices 28814 The Nokia FastMile 4G Receiver is available in the following model types:

fixed beamforming antennas Compact multi-band; this model type has the following features:

multi-band transmission Compact mono-band; this model type has the following features:

mono-band transmission ABA; this model type has the following features:

high gain beam steering antenna automated beam alignment fixed beamforming antennas Figure 7 shows examples of the model types of the Nokia FastMile 4G Receiver. Issue: 01 DRAFT 3TG-00386-ABAA-TCZZA 35 DRAFT Nokia FastMile 4G Receiver Product Overview Product overview Figure 7 Examples of model types of the Nokia FastMile 4G Receiver Compact/multi-band Compact/mono-band ABA 28770 The Nokia FastMile 4G Receiver has built-in antenna and LTE modem that provide the LTE broadband access to the network. The Nokia FastMile 4G Receiver is capable of withstanding outdoor environmental conditions. It has an IP rating of IP66 TYPE3. Compact mono-band and ABA models can operate in a temperature of 30C to 65C (22F to 149F), and Compact multi-

band models can operate in a temperature of 30C to 55C (22F to 131F). See chapter 16 for additional specifications of the Nokia FastMile 4G Receiver. 5.2 End-to-end example The Nokia FastMile 4G Receiver can be used to provide IPTV, Internet, and VoIP services to end-users that are connected to the Nokia FastMile 4G Receiver through a residential gateway and POE injector. The Nokia FastMile 4G Receiver can also connect directly to a video monitor, personal computer, and so on rather than using a residential gateway and POE injector. 36 3TG-00386-ABAA-TCZZA Issue: 01 DRAFT DRAFT Nokia FastMile 4G Receiver Product Overview Due to the independence between the Nokia FastMile 4G Receiver and the gateway, the Nokia FastMile 4G Receiver also addresses the business market. The business customer can seamlessly re-use their existing business gateway. The Nokia FastMile 4G Receiver supports extended QCI and multiple APNs that can be mapped on VLANs to support QoS for different services. Product overview Figure 8 shows an end-to-end example that features the Nokia FastMile 4G Receiver with a residential gateway and POE injector. Figure 8 End-to-end example featuring the Nokia FastMile 4G Receiver with a residential gateway and POE injector Core IPTV Internet VoIP Radio basestation Nokia FastMile 4 G Receiver PoE Injector Residential gateway LTE Gbps 1 Ethernet Wi-Fi or Ethernet WiFi or Ethernet connectivity to end-user devices that are using IPTV, internet, and VoIp 28815 Issue: 01 DRAFT 3TG-00386-ABAA-TCZZA 37 DRAFT Functional overview Nokia FastMile 4G Receiver Product Overview 6 Functional overview 6.1 Overview 6.2 LTE characteristics 6.3 Data forwarding 6.4 Ethernet characteristics 6.5 Power supply characteristics 6.6 Remote management protocols 6.1 Overview The Nokia FastMile 4G Receiver provides wireless broadband access in the form of LTE to meet the ever growing network needs of end users. The Nokia FastMile 4G Receiver is an outdoor device that lets operators use LTE to offer fixed wireless broadband to their customers. The Nokia FastMile 4G Receiver is easy to install and is user-friendly to operate. 6.1.1 Nokia Wireless app The Nokia FastMile 4G Receiver can be installed with the assistance of an Android application, known as Nokia Wireless app, installed on a mobile phone. The app in general lets you scan the QR code of the receiver, identify the best location to install the receiver by measuring the signal strength and connect to the receiver over a VPN connection in order to apply configuration. The Nokia Wireless app also provides management and troubleshooting capabilities for the Nokia FastMile 4G Receiver such as the following:

viewing information that includes:

LTE cell info such as connection state, status, EARFCN, and PCI current and average signal stats for RSRP, RSRQ, RSSI, and SINR other stats (for example, bytes sent and bytes received) uploading CA certificates to the Nokia FastMile 4G Receiver resetting the 4G Receiver to factory settings rebooting the 4G Receiver 38 3TG-00386-ABAA-TCZZA Issue: 01 DRAFT DRAFT Nokia FastMile 4G Receiver Product Overview Functional overview See the Installation guide for more information about how the Nokia Wireless app is used in the installation process. See chapter 13 in this document for more information about how Nokia Wireless app can be used for management of the Nokia FastMile 4G Receiver. 6.1.2 Web UI The Nokia FastMile 4G Receiver supports local management capability, allowing status view and configuration operations, through a Web UI for a Nokia FastMile 4G Receiver managed by an ACS through TR-069. The Web UI can be accessed directly from a laptop through the Ethernet port of the Nokia FastMile 4G Receiver via the dedicated static IP address 192.168.0.1

(https://192.168.0.1). Alternatively, it is possible to access the Web UI from behind a Nokia-approved residential gateway which is appropriately configured. It is recommended not to change or reconfigure the Nokia FastMile 4G Receiver static IP for the Web UI interface, since changing the default IP address (that is, 192.168.0.1) would impede access from the Web UI. Web UI functionality is optimized for the Chrome browser (74.0.3729 or greater), but is not restricted to it. The Web UI design is optimized for a resolution of 1920x1080 pixels, but is not restricted to it. See chapter 14 in this document for information about using the Web UI to manage the Nokia FastMile 4G Receiver. 6.1.3 Remote management The Nokia FastMile 4G Receiver supports remote management capability, allowing management and health monitoring of it from the Nokia Altiplano FastMile Controller

(through NETCONF) or from an ACS (through TR-069). See the documentation for the Nokia Altiplano FastMile Controller for information about managing and monitoring the Nokia FastMile 4G Receiver through the Nokia Altiplano FastMile Controller. See section 6.6 for information about the remote management protocols. 6.2 LTE characteristics The following are some of the key LTE characteristics of the Nokia FastMile 4G Receiver:

Issue: 01 DRAFT 3TG-00386-ABAA-TCZZA 39 DRAFT Functional overview Nokia FastMile 4G Receiver Product Overview LTE 3GPP Release 12 Compliant, UE Category 12 supports the E-UTRA bands listed in Table 3 Table 3 E-UTRA bands supported by the Nokia FastMile 4G Receiver E-UTRA bands Band 42/43/48 (mono-band support) Band 42/43/48 (ABA support) Band 3 (mono-band support) Band 7/38/40/41 (mono-band support) Band B3/B7/B20/B32 (multi-band support) Band B1/B3/B7/B38/B40/B41/B20/B28 (multi-band support) 6.3 Data forwarding Model 4G01-A 4G01-B 4G02-A 4G03-A 4G04-A 4G05-A The Nokia FastMile 4G Receiver supports the following data forwarding methods:

Table 4 Data forwarding methods supported by the Nokia FastMile 4G Receiver Forwarding mode Typical use Single APN with multi-bearers for route mode Recommended for using only one APN specific for Nokia FastMile 4G Receiver Could be used for WAN of IDU with VLAN tag Single APN with multi-bearers for bridge mode Multiple APNs with bridge mode Used as multi-APN, separated service with APNs: each APN is for each service. Note in this case, a specific port should be reserved for service traffic. Multiple APNs with mixed mode Can be used for separated APNs on OAM and also other APNs for separated services:

Tunnel mode Only default APN is in route mode which could be OAM Besides APN, each APN is for each service Can be used for using tunnel for L2 forwarding such as PPPoE 6.4 Ethernet characteristics The following are some of the key Ethernet characteristics of the Nokia FastMile 4G Receiver:

provides a 1 Gbps Ethernet LAN Interface that, depending on the model of the Nokia FastMile 4G Receiver, has the following:

the Compact mono-band and ABA models have a pre-attached 3 m (9.8 ft) Cat5e shielded twisted pair Ethernet cable with a male RJ 45 connector at the free end the Compact multi-band and models have a female RJ 45 connector that supports 40 3TG-00386-ABAA-TCZZA Issue: 01 DRAFT DRAFT Nokia FastMile 4G Receiver Product Overview Functional overview connection of a customer-supplied Cat5e shielded twisted pair Ethernet cable with standard pinouts that is up to a maximum of 80 m (262 ft) in length supports IEEE802.3 1000BASE-T supports IEEE802.3az energy efficient Ethernet the Ethernet cable for all models is also used for power over Ethernet (PoE) as per IEEE802.3 at type-2 6.5 Power supply characteristics The following are some of the key power supply characteristics of the Nokia FastMile 4G Receiver:

powered through PoE from a residential gateway, or through a PoE injector supports PoE+ as per IEEE802.3 at type-2 rating: 53 VDC at 600 mA See section 11.1 for power information. 6.6 Remote management protocols Remote management of the Nokia FastMile 4G Receiver can be done from the Nokia Altiplano FastMile Controller through NETCONF or from an ACS through TR-

069/TR181 depending on the installed SIM card. For the first startup, the Nokia FastMile 4G Receiver starts from the NETCONF version.The Nokia FastMile 4G Receiver will automatically detect the remote management protocol through information that is on the SIM card installed in the unit. If the Nokia FastMile 4G Receiver detects that the remote management protocol on the SIM card is TR-069/TR181, it restarts and starts up with TR-

069/TR181 management. If the remote management protocol is NETCONF, the Nokia FastMile 4G Receiver can be managed remotely from the Nokia Altiplano FastMile Controller. If the remote management protocol is TR-069, the Nokia FastMile 4G Receiver can be managed remotely from an ACS. Figure 9 shows the Nokia Altiplano FastMile Controller being used for remote management of the Nokia FastMile 4G Receiver. Note that NETCONF is used by the Nokia Altiplano FastMile Controller to manage the Nokia FastMile 4G Receiver, and that an ACS manages the residential gateway through TR-069. Issue: 01 DRAFT 3TG-00386-ABAA-TCZZA 41 DRAFT Functional overview Nokia FastMile 4G Receiver Product Overview Figure 9 Altiplano FastMile Controller Remote management of the Nokia FastMile 4G Receiver through the Nokia IPTV Internet Core VoIP NETCONF Nokia Altiplano Fastmile Controller ACS TR-069 Radio basestation Nokia FastMile 4 G Receiver PoE Injector Residential gateway LTE 1 Gbps Ethernet Wi-Fi or Ethernet WiFi or Etherne connectivity to end-user devic that are using IPTV, internet, and VoIp 28 Figure 10 shows an ACS being used for remote management of the Nokia FastMile 4G Receiver. Note that the ACS uses TR-069 to manage both the Nokia FastMile 4G Receiver and the residential gateway. 42 3TG-00386-ABAA-TCZZA Issue: 01 DRAFT DRAFT Nokia FastMile 4G Receiver Product Overview Functional overview Figure 10 Remote management of the Nokia FastMile 4G Receiver through an ACS Core IPTV Internet VoIP ACS TR-069 Radio basestation Nokia FastMile 4 G Receiver PoE Injector Residential gateway LTE 1 Gbps Ethernet Wi-Fi or Ethernet WiFi or Ethernet connectivity to end-user devices that are using IPTV, internet, and VoIp 28817 Issue: 01 DRAFT 3TG-00386-ABAA-TCZZA 43 DRAFT Nokia FastMile 4G Receiver Product Overview Model overview 7 Model overview 7.1 Models of the Nokia FastMile 4G Receiver 7.1 Models of the Nokia FastMile 4G Receiver A wide range of models are available for the Nokia FastMile 4G Receiver to support different E-UTRA bands and band combinations for LTE. All models can be wall-mounted or pole-mounted. If you will be mounting the Nokia FastMile 4G Receiver on a pole, you will need kit 3TG-00291-AA that contains the pole adapter for the Nokia FastMile 4G Receiver. Note that pole strapping and wall fasteners are not provided by Nokia. Table 5 describes the E-UTRA band and frequency support and the antenna configurations for each model of the Nokia FastMile 4G Receiver. Models of the Nokia FastMile 4G Receiver E-UTRA band support and frequencies Antenna configuration Model type Band 42: TDD, 3400 MHz 3600 MHz Band 43: TDD, 3600 MHz 3800 MHz Band 48: TDD, 3650 MHz 3700 MHz Band 42: TDD, 3400 MHz 3600 MHz Band 43: TDD, 3600 MHz 3800 MHz Band 48: TDD, 3650 MHz 3700 MHz Band 3: FDD, Tx 1710 MHz 1785 MHz, Rx 1805 MHz 1880 MHz Band 7: FDD, Tx 2500 MHz 2570 MHz, Rx 2620 MHz 2690 MHz Band 38: TDD, 2570 MHz 2620 MHz Band 40: TDD, 2300 MHz 2400 MHz Band 41: TDD, 2496 MHz 2690 MHz Band 3: FDD, Tx 1710 MHz 1785 MHz, Rx 1805 MHz 1880 MHz Band 7: FDD, Tx 2500 MHz 2570 MHz, Rx 2620 MHz 2690 MHz MHz Rx 791 MHz 821 MHz Band 20: FDD, Tx 832 MHz 862 1496 MHz Band 32: FDD, Rx 1452 MHz Integrated with 15 dBi fixed beamforming antenna Compact mono-

band Integrated with 3x4 dual polarized antenna array, electronic beam steering +/- 45 horizontally, and up to 17 dBi peak antenna gain with beam steering ABA Integrated with 10.5 dBi fixed beamforming antenna Compact mono-

band Integrated with 12.5 dBi fixed beamforming antenna Compact mono-

band Compact multi-

band Band 7 is integrated with > 11 dBi fixed beamforming antenna Band 3 is integrated with > 9 dBi fixed beamforming antenna Band 32 is integrated with > 6 dBi fixed beamforming antenna Band 20 is integrated with > 3 dBi fixed beamforming antenna 3TG-00386-ABAA-TCZZA Issue: 01 DRAFT DRAFT Table 5 Model 4G01-A 4G01-B 4G02-A 4G03-A 4G04-A

(1 of 2) 44 Nokia FastMile 4G Receiver Product Overview Model overview Model 4G05-A E-UTRA band support and frequencies Antenna configuration Model type Compact multi-

band Bands 7, 38, 40, and 41 are integrated with > 11 dBi fixed beamforming antenna Bands 1 and 3 are integrated with > 9 dBi fixed beamforming antenna Bands 20 and 28 are integrated with > 3 dBi fixed beamforming antenna Band 1: FDD, Tx 1920 MHz 1980 MHz, Rx 2110 MHz 2170 MHz MHz, Rx 1805 MHz 1880 MHz 2570 MHz, Rx 2620 MHz 2690 MHz Band 7: FDD, Tx 2500 MHz Band 3: FDD, Tx 1710 MHz 1785 Band 38: TDD, 2570 MHz 2620 Band 40: TDD, 2300 MHz 2400 MHz MHz MHz MHz, Rx 791 MHz 821 MHz MHz, Rx 758 MHz - 803 MHz Band 41: TDD, 2496 MHz 2690 Band 28: FDD, Tx 703 MHz 748 Band 20: FDD, Tx 832 MHz 862 Table 6 Model 4G01-A 4G01-B 4G02-A 4G03-A 4G04-A 4G05-A Product details Nokia FM compact Nokia FM ABA Nokia FM compact Nokia FM compact Nokia FastMile Receiver Nokia FastMile Receiver

(2 of 2) 7.1.1 Label information Table 6 describes the label information for the Nokia FastMile 4G Receiver. Label information for the Nokia FastMile 4G Receiver Physical interfaces 8 Physical interfaces 8.1 Physical interfaces of the Compact mono-band and ABA models Issue: 01 DRAFT 3TG-00386-ABAA-TCZZA 45 DRAFT 8.2 Physical interfaces of the Compact multi-band models Nokia FastMile 4G Receiver Product Overview 8.1 Physical interfaces of the Compact mono-

band and ABA models Table 7 describes the physical interfaces of the Compact mono-band and ABA models of the Nokia FastMile 4G Receiver. Table 7 Physical interfaces of the Compact mono-band and ABA models of the Nokia FastMile 4G Receiver Description Point for connecting to external ground Located on the underside of the unit; see Figure 11. Interface Ground point Ethernet cable Status LED Reset button SIM slot Ethernet connectivity for the Compact mono-band and ABA models is through a pre-

attached 3 m (9.8 ft) cat5e shielded Ethernet cable; the same cable is also used for power (PoE as per IEEE802.3 at type-2). Located on the underside of the unit; see Figure 11. The pre-attached Ethernet cable has a male RJ 45 connector at the free end. An additional length of cat5e shielded Ethernet cabling can be attached to the Ethernet cable up to a maximum of 80 m (262 ft) in combined length. A waterproof IP67 female RJ 45 plug is needed to connect the Ethernet cabling to the Ethernet cable of the Nokia FastMile 4G Receiver. Single multifunction LED that indicates status information for the Nokia FastMile 4G Receiver. Located on the underside of the unit; see Figure 11. See section 10.1 for the behavior of the status LED of the Compact mono-band and ABA models. Button to reset the Nokia FastMile 4G Receiver. Located on the underside of the unit; see Figure 11. Slot for Nano/4FF SIM card for a Compact mono-band model or ABA model of the Nokia FastMile 4G Receiver. Located on the underside of the unit; see Figure 11. If the SIM card needs to be replaced, the Nokia FastMile 4G Receiver needs to be put in a powered off state before the SIM card can be removed and the new one inserted See section 9.1 for SIM card information for the Compact mono-band and ABA models of the Nokia FastMile 4G Receiver. Figure 11 shows the location of the physical interfaces on the Compact mono-band and ABA models of the Nokia FastMile 4G Receiver. Physical interfaces 46 3TG-00386-ABAA-TCZZA Issue: 01 DRAFT DRAFT Nokia FastMile 4G Receiver Product Overview Figure 11 Location of physical interfaces on the Compact mono-band and ABA models of the Nokia FastMile 4G Receiver Ground point Ethernet Cable SIM slot Status LED Reset button 28797 8.2 Physical interfaces of the Compact multi-

band models Table 8 describes the physical interfaces of Compact multi-band models of the Nokia FastMile 4G Receiver. Table 8 Physical interfaces of the Compact multi-band models of the Nokia FastMile 4G Receiver Interface Description Ground point Ethernet port Status LED Signal strength LEDs Measurement button

(1 of 2) Point for connecting to external ground Located on the back of the unit; see Figure 12. The Compact multi-band models have a female RJ 45 connector for attaching a customer-supplied cat5e shielded Ethernet cable with standard pinouts that is a maximum of 80 m (262 ft) in length; the same cable is also used for power (PoE as per IEEE802.3 at type-2). Located on the underside of the unit; see Figure 13. Single multifunction LED that indicates status information for the Nokia FastMile 4G Receiver. Located on the top of the unit. See section 10.1 for a figure showing the location of the status LED of the Compact multi-band models and information about its behavior. The Compact multi-band models have a set of five LEDs that work together to indicate the LTE signal strength detected by the Nokia FastMile 4G Receiver. Located on the top of the unit. See section 10.2 for a figure showing the location of the signal strength LEDs and information about their behavior. Button to activate the signal strength LEDs Located on the side of the unit. See section 10.2 for a figure showing the location of the measurement button and information about using it to activate the signal strength LEDs. Physical interfaces Issue: 01 DRAFT 3TG-00386-ABAA-TCZZA 47 DRAFT Nokia FastMile 4G Receiver Product Overview Interface Reset button SIM slot

(2 of 2) Description Button to reset the Nokia FastMile 4G Receiver. Located on the underside of the unit; see Figure 13. Slot for Nano/4FF SIM card for a Compact multi-band model of the Nokia FastMile 4G Receiver. Located on the underside of the unit; see Figure 13. See section 9.2 for SIM card information for the Compact multi-band models of the Nokia FastMile 4G Receiver. Figure 12 shows the location of the ground point for the Compact multi-band models of the Nokia FastMile 4G Receiver. Figure 12 models of the Nokia FastMile 4G Receiver Location of the ground point for the Compact multi-band Figure 13 shows the location of the physical interfaces that are on the underside of the Compact multi-band models of the Nokia FastMile 4G Receiver. Physical interfaces 28798 48 3TG-00386-ABAA-TCZZA Issue: 01 DRAFT DRAFT Nokia FastMile 4G Receiver Product Overview Figure 13 Location of physical interfaces on the underside of the Compact multi-band models of the Nokia FastMile 4G Receiver Vent M6 Ethernet port SIM slot Reset button 28771 Issue: 01 DRAFT 3TG-00386-ABAA-TCZZA 49 DRAFT Nokia FastMile 4G Receiver Product Overview SIM cards 9 SIM cards 9.1 SIM card information for the Compact mono-band and ABA models 9.2 SIM card information for the Compact multi-band models 9.1 SIM card information for the Compact mono-

band and ABA models The SIM card installed in the Nokia FastMile 4G Receiver allows the Nokia FastMile 4G Receiver to connect to the LTE network and determines the remote management protocol supported for the Nokia FastMile 4G Receiver; see section 6.6 for more information about remote management. Figure 14 shows a detailed view of the SIM card slot on the Compact mono-band and ABA models of the Nokia FastMile 4G Receiver. Figure 14 Detailed view of SIM card slot on the Compact mono-band and ABA models 28642 The Nokia FastMile 4G Receiver Installation Guide provides detailed steps for inserting the SIM card. The SIM card must be appropriate for the remote management protocol to be used for the Nokia FastMile 4G Receiver. 50 3TG-00386-ABAA-TCZZA Issue: 01 DRAFT DRAFT Nokia FastMile 4G Receiver Product Overview SIM cards 9.2 SIM card information for the Compact multi-

band models The SIM card installed in the Nokia FastMile 4G Receiver allows the Nokia FastMile 4G Receiver to connect to the LTE network and determines the remote management protocol supported for the Nokia FastMile 4G Receiver; see section 6.6 for more information about remote management. Figure 15 shows a detailed view of the SIM card slot on the Compact multi-band models of the Nokia FastMile 4G Receiver. Figure 15 Detailed view of SIM card slot on the Compact multi-band models The Nokia FastMile 4G Receiver Installation Guide provides detailed steps for inserting the SIM card. The SIM card must be appropriate for the remote management protocol to be used for the Nokia FastMile 4G Receiver. 28802 LEDs 10 LEDs 10.1 Status LED Issue: 01 DRAFT 3TG-00386-ABAA-TCZZA 51 DRAFT 10.2 Signal strength LEDs Nokia FastMile 4G Receiver Product Overview 10.1 Status LED All models of the Nokia FastMile 4G Receiver have a status LED:

Figure 16 shows the location of the status LED on the Compact mono-band and ABA models of the Nokia FastMile 4G Receiver Figure 17 shows the location of the status LED on the Compact multi-band models of the Nokia FastMile 4G Receiver Figure 16 Location of the status LED on the Compact mono-band and ABA models of the Nokia FastMile 4G Receiver Status LED 28799 Figure 17 models of the Nokia FastMile 4G Receiver Location of the status LED on the Compact multi-band Status LED 28772 The status LED behaves differently depending on whether the Nokia FastMile 4G Receiver is managed from:

the Nokia Altiplano FastMile Controller (through NETCONF): see Table 9 an ACS (through TR-069): see Table 10 LEDs Table 9 Status LED behavior for Nokia FastMile 4G Receiver managed from the Nokia Altiplano FastMile Controller LED color LED priority LED behavior Status information 52 3TG-00386-ABAA-TCZZA Issue: 01 DRAFT DRAFT Nokia FastMile 4G Receiver Product Overview Blue First priority Blinking Bluetooth connection in progress Solid Off Solid Off Solid Off Solid Off Solid Off Red Second priority Blinking Bluetooth connection established No Bluetooth connection Critical alarm Major or minor alarm No alarm Green Third priority Blinking twice per second Kernel and application start up Blinking one per second Application start up Start up OAM link is established Table 10 Status LED behavior for Nokia FastMile 4G Receiver managed from an ACS LED color LED priority LED behavior Status information Blue First priority Blinking Bluetooth connection in progress Green Second priority Blinking twice per second Kernel and application start up Bluetooth connection established No Bluetooth connection Blinking one per second Application start up Start up Software is stable 10.2 Signal strength LEDs Five signal strength LEDs are provided on the Compact multi-band models of the Nokia FastMile 4G Receiver as shown in Figure 18. LEDs Figure 18 Location of the signal strength LEDs Signal strength LEDs 28773 Issue: 01 DRAFT 3TG-00386-ABAA-TCZZA 53 DRAFT Nokia FastMile 4G Receiver Product Overview The signal strength LEDs can be activated by pressing the measurement button on the side of the Compact multi-band models of the Nokia FastMile 4G Receiver. Figure 19 shows the location of the measurement button. Figure 19 Location of the measurement button Me asu rement bu tton 28885 The signal strength LEDs act as a set to indicate the LTE signal strength detected by the Nokia FastMile 4G Receiver. For example, if the signal strength is fourth level, then LEDs 1, 2, 3, and 4 are lit. The Nokia FastMile 4G Receiver Installation Guide provides more information about the signal strength LEDs. LEDs 54 3TG-00386-ABAA-TCZZA Issue: 01 DRAFT DRAFT Nokia FastMile 4G Receiver Product Overview Power information 11 Power information 11.1 Power information for the Nokia FastMile 4G Receiver 11.1 Power information for the Nokia FastMile 4G Receiver The Nokia FastMile 4G Receiver receives power though a Cat5e shielded Ethernet cable connected to a residential gateway or a PoE injector:

The Compact mono-band and ABA models have a pre-attached 3 m (9.8 ft) Cat5e shielded twisted pair Ethernet cable with a male RJ 45 connector at the free end. An additional length of cat5e shielded Ethernet cabling can be attached to the Ethernet cable up to a maximum of 80 m (262 ft) in combined length. A waterproof IP67 female RJ 45 plug is needed to connect the Ethernet cabling to the Ethernet cable of the Nokia FastMile 4G Receiver. The Compact multi-band models have a female RJ 45 connector for attaching a customer-supplied cat5e shielded Ethernet cable with standard pinouts that is a maximum of 80 m (262 ft) in length. See section 12.4 for power consumption information. Power information Issue: 01 DRAFT 3TG-00386-ABAA-TCZZA 55 DRAFT Performance information Nokia FastMile 4G Receiver Product Overview 12 Performance information 12.1 Performance overview 12.2 Throughput information 12.3 Carrier aggregation information 12.4 Power consumption information 12.1 Performance overview This chapter provides the following performance information for the Nokia FastMile 4G Receiver:

throughput information: see section 12.2 carrier aggregation information: see section 12.3 power consumption information: section 12.4 Some performance metrics for the Nokia FastMile 4G Receiver can be viewed through the Nokia Wireless app or Web UI or accessed through the Nokia Altiplano FastMile Controller:

see chapter 13 for more information about viewing information for the Nokia FastMile 4G Receiver through the Nokia Wireless app see chapter 14 for more information about viewing information for the Nokia FastMile 4G Receiver through the Web UI see the documentation for the Nokia Altiplano FastMile Controller for more information about accessing information for the Nokia FastMile 4G Receiver through the Nokia Altiplano FastMile Controller 12.2 Throughput information Table 11 provides LTE throughput information for the Nokia FastMile 4G Receiver. Table 11 LTE throughput information Mode UDP DL (3CA) TCP DL (3CA) UDP UL TCP UL FDD TDD 560M 415M 360M 360M 73M 14M 73M 18M The results in the above table are based on the following:

56 3TG-00386-ABAA-TCZZA Issue: 01 DRAFT DRAFT Nokia FastMile 4G Receiver Product Overview Performance information Downlink: DL 3xCA 2x2MIMO 256 QAM Uplink: single carrier 64 QAM FDD inter-band 3CA TDD Band 41 intra-Band 3CA, configuration is configuration 2, subframe 7 Base Bandwidth 20M Data rates can have a margin of 2%

Packet length is 1470B for UDP Window is 1000k for TCP Data rates are for IPv4 cases Data forwarding working on router model The end-to-end throughput is achieved in the conductive mode with cable connected. Ethernet throughput for the Nokia FastMile 4G Receiver is as per standard Ethernet 1000BASE-T, with a maximum of 1000 Mbps. The Ethernet link gets negotiated at 1000 Mbps when a residential gateway or a PoE injector is connected to the Nokia FastMile 4G Receiver. 12.3 Carrier aggregation information The following tables provide carrier aggregation support information for the Nokia FastMile 4G Receiver:

Compact mono-band and ABA models: Table 12 Compact multi-band B3/B7/B20/B32 (Model 4G04-A): Table 13 Compact multi-band B1/B3/B7/B38/B40/B41/B20/B28 (Model 4G05-A): Table 14 Table 12 Carrier aggregation support for the Compact mono-band and ABA models Downlink Carrier aggregation support 3400 MHz-3600 MHz Up to 40 MHz bandwidth contiguous 2CA B43 3600 MHz-3800 MHz Up to 40 MHz bandwidth contiguous 2CA Up to 40 MHz bandwidth non-contiguous 2CA Up to 60 MHz bandwidth contiguous 3CA Up to 60 MHz bandwidth non-contiguous 3CA Up to 40 MHz bandwidth non-contiguous 2CA Up to 60 MHz bandwidth contiguous 3CA Up to 60 MHz bandwidth non-contiguous 3CA Band B42

(1 of 2) Issue: 01 DRAFT 3TG-00386-ABAA-TCZZA 57 DRAFT Performance information Nokia FastMile 4G Receiver Product Overview Downlink Carrier aggregation support 3650 Mhz-3700 MHz Up to 40 MHz bandwidth contiguous 2CA Up to 40 MHz bandwidth non-contiguous 2CA Up to 50 MHz bandwidth contiguous 3CA Up to 50 MHz bandwidth non-contiguous 3CA 1805 MHz-1880 MHz Up to 40 MHz bandwidth contiguous 2CA Up to 40 MHz bandwidth non-contiguous 2CA 2620 MHz-2690 MHz Up to 40 MHz bandwidth contiguous 2CA 2570 MHz-2620 MHz Up to 40 MHz bandwidth contiguous 2CA 2300 MHz-2400 MHz Up to 40 MHz bandwidth contiguous 2CA Up to 40 MHz bandwidth non-contiguous 2CA Up to 60 MHz bandwidth contiguous 3CA Up to 40 MHz bandwidth non-contiguous 2CA Up to 60 MHz bandwidth contiguous 3CA Up to 40 MHz bandwidth non-contiguous 2CA Up to 60 MHz bandwidth contiguous 3CA Up to 40 MHz bandwidth non-contiguous 2CA Up to 60 MHz bandwidth contiguous 3CA 2496 MHz-2690 MHz Up to 40 MHz bandwidth contiguous 2CA Band B48 B3 B7 B38 B40 B41

(2 of 2) B42 and B43 3400 MHz-3800 MHz Up to 40 MHz bandwidth interband 2CA Table 13 provides carrier aggregation support information for the Compact multi-

band B3/B7/B20/B32 (Model 4G04-A) of the Nokia FastMile 4G Receiver. Table 13 Bands Carrier aggregation support for Model 4G04-A Downlinks Uplinks B3+B20 B7+B20 B3+B7 B3+B32 1805 MHz - 1880 MHz

+791 MHz - 821 MHz 2620 MHz - 2690 MHz

+791 MHz - 821 MHz 1805 MHz - 1880 MHz

+2620 MHz - 2690 MHz 1805 MHz - 1880 MHz

+1452 MHz - 1496 MHz Carrier aggregation support Up to 40 MHz bandwidth inter band 2CA Up to 40 MHz bandwidth inter band 2CA Up to 40 MHz bandwidth inter band 2CA Up to 40 MHz bandwidth inter band 2CA 58 3TG-00386-ABAA-TCZZA Issue: 01 DRAFT DRAFT Nokia FastMile 4G Receiver Product Overview Performance information B20+B32

(1 of 2) 791 MHz - 821 MHz

+1452 MHz - 1496 MHz Bands Downlinks Uplinks B7+B32 B3+B7+B20 B3+B7+B32 2620 MHz - 2690 MHz

+1452 MHz - 1496 MHz 1805 MHz - 1880 MHz

+2620 MHz - 2690 MHz

+791 MHz - 821 MHz 1805 MHz - 1880 MHz

+2620 MHz - 2690 MHz

+1452 MHz - 1496 MHz Up to 40 MHz bandwidth inter band 2CA Carrier aggregation support Up to 40 MHz bandwidth inter band 2CA Up to 60 MHz bandwidth inter band 3CA Up to 60 MHz bandwidth inter band 3CA B3+B20 B7+B20 B3+B7

(2 of 2) 1805 MHz - 1880 MHz

+791 MHz - 821 MHz 2620 MHz - 2690 MHz

+791 MHz - 821 MHz Up to 40 MHz bandwidth inter band 2CA Up to 40 MHz bandwidth inter band 2CA 1805 MHz - 1880 MHz

+2620 MHz - 2690 MHz Up to 40 MHz bandwidth inter band 2CA Table 14 provides carrier aggregation support information for the Compact multi-

band B1/B3/B7/B38/B40/B41/B20/B28 (Model 4G05-A) of the Nokia FastMile 4G Receiver. Table 14 Band Carrier aggregation support for Model 4G05-A Carrier aggregation support Downlink B1 B3 B7 B38 B40 2110 MHz - 2170 MHz Up to 40 MHz bandwidth contiguous 2CA Up to 60 MHz bandwidth contiguous 3CA 1805 MHz - 1880 MHz Up to 40 MHz bandwidth contiguous 2CA Up to 60 MHz bandwidth contiguous 3CA 2620 MHz - 2690 MHz Up to 40 MHz bandwidth contiguous 2CA Up to 60 MHz bandwidth contiguous 3CA 2570 MHz - 2620 MHz Up to 40 MHz bandwidth contiguous 2CA Up to 50 MHz bandwidth contiguous 3CA 2300 MHz - 2400 MHz Up to 40 MHz bandwidth contiguous 2CA Up to 60 MHz bandwidth contiguous 3CA Up to 80 MHz bandwidth contiguous 3CA Issue: 01 DRAFT 3TG-00386-ABAA-TCZZA 59 DRAFT Performance information Nokia FastMile 4G Receiver Product Overview B41 2496 MHz 2690 MHz Up to 40 MHz bandwidth contiguous 2CA Up to 60 MHz bandwidth contiguous 3CA Up to 80 MHz bandwidth contiguous 3CA

(1 of 2) Band B20 B28 B3+B41 B1+B41 B1+B38 B3+B40+B28 B1+B3+B40 B1+B3+B7+B28 B1+B3+B7+B20

(2 of 2) Downlink Carrier aggregation support 791 MHz - 821 MHz Up to 30 MHz bandwidth contiguous 2CA Up to 30 MHz bandwidth non-contiguous 2CA 758 MHz - 803 MHz Up to 40 MHz bandwidth contiguous 2CA 1805 MHz - 1880 MHz

+2496 MHz - 2690 MHz 2110 MHz - 2170 MHz

+2496 MHz - 2690 MHz 2110 MHz - 2170 MHz

+2570 MHz - 2620 MHz 1805 MHz - 1880 MHz

+2300 MHz - 2400 MHz

+758 MHz - 803 MHz 2110 MHz - 2170 MHz

+1805 MHz - 1880 MHz

+2300 MHz - 2400 MHz 2110 MHz - 2170 MHz

+1805 MHz - 1880 MHz

+2620 MHz - 2690 MHz

+758 MHz - 803 MHz 2110 MHz - 2170 MHz

+1805 MHz - 1880 MHz

+2620 MHz - 2690 MHz

+791 MHz - 821 MHz Up to 40 MHz bandwidth inter band 2CA Up to 40 MHz bandwidth inter band 2CA Up to 40 MHz bandwidth inter band 2CA Up to 40 MHz bandwidth inter band 2CA (all permutations) Up to 60 MHz bandwidth inter band 3CA Up to 40 MHz bandwidth inter band 2CA (all permutations) Up to 60 MHz bandwidth inter band 3CA Up to 40 MHz bandwidth inter band 2CA (all permutations) Up to 60 MHz bandwidth inter band 3CA (all permutations Up to 40 MHz bandwidth inter band 2CA (all permutations) Up to 60 MHz bandwidth inter band 3CA (all permutations 12.4 Power consumption information Table 15 provides power consumption information for all models of the Nokia FastMile 4G Receiver. Table 15 Condition Power consumption information for all models Power consumption 60 3TG-00386-ABAA-TCZZA Issue: 01 DRAFT DRAFT Nokia FastMile 4G Receiver Product Overview Performance information Maximum power output Idle power 7 w 1 w Issue: 01 DRAFT 3TG-00386-ABAA-TCZZA 61 DRAFT Management using the Nokia Wireless app Nokia FastMile 4G Receiver Product Overview 13 Management using the Nokia Wireless app 13.1 Using the Nokia Wireless app to manage the Nokia FastMile 4G Receiver 13.2 Using the Nokia Wireless app to manage a unit managed by the Nokia Altiplano FastMile Controller 13.3 Using the Nokia Wireless app to manage a unit managed by an ACS 13.1 Using the Nokia Wireless app to manage the Nokia FastMile 4G Receiver After the Nokia FastMile 4G Receiver has been installed as described in the installation guide, you can use the Nokia Wireless app to perform management activities on it, such as viewing information, uploading CA certificates, rebooting the Nokia FastMile 4G Receiver, or resetting to factory settings. There are some differences in managing the Nokia FastMile 4G Receiver through the Nokia Wireless app depending on whether the Nokia FastMile 4G Receiver is managed remotely by the Nokia Altiplano FastMile Controller (through NETCONF) or by an ACS (through TR-069):

if the Nokia Altiplano FastMile Controller is being used for remote management of the Nokia FastMile 4G Receiver (through NETCONF), see section 13.2 if an ACS is being used for remote management of the Nokia FastMile 4G Receiver (through TR-069), see section 13.3 13.2 Using the Nokia Wireless app to manage a unit managed by the Nokia Altiplano FastMile Controller If the Nokia Altiplano FastMile Controller is being used for remote management of the Nokia FastMile 4G Receiver (through NETCONF), you can use the Nokia Wireless app to perform management activities on it, such as viewing information, uploading CA certificates, rebooting the Nokia FastMile 4G Receiver, or resetting to factory settings, as described in the following procedure. 62 3TG-00386-ABAA-TCZZA Issue: 01 DRAFT DRAFT Nokia FastMile 4G Receiver Product Overview Management using the Nokia Wireless app You will need the QR code that was saved as described during installation the Nokia FastMile 4G Receiver in order to scan it when logging in to it through the Nokia Wireless app. Logging in to the Nokia FastMile 4G Receiver also includes the following:

initiating a Bluetooth connection enabling Bluetooth allowing the Bluetooth pairing request establishing the VPN connection entering the username and password Procedure 5 To perform management activities Use the following procedure to perform management activities through the Nokia Wireless app for a Nokia FastMile 4G Receiver that is managed remotely by the Nokia Altiplano FastMile Controller through NETCONF. 1 When you are close to the Nokia FastMile 4G Receiver, connect the mobile phone to the Internet and open the Nokia Wireless app on the phone. An introductory screen with a video appears. Figure 20 shows the introductory screen. Issue: 01 DRAFT 3TG-00386-ABAA-TCZZA 63 DRAFT Management using the Nokia Wireless app Nokia FastMile 4G Receiver Product Overview Figure 20 FastMile Controller through NETCONF Introductory screen for unit managed by the Nokia Altiplano Continue by tapping on Get started. 2 After the introductory screen has cleared, the Nokia Wireless app shows an animation of how to scan the QR code of the Nokia FastMile 4G Receiver so that the app can obtain the MAC address, unique device identifier, enterprise id, and device type of the Nokia FastMile 4G Receiver. The QR code was provided on a sheet of paper in the shipping package of the Nokia FastMile 4G Receiver. The sheet of paper, or a photograph of it, should have been saved and made available for anyone who later needs to scan the QR code when accessing the Nokia FastMile 4G Receiver. Figure 21 shows the screen for the prompt to scan the QR code. 64 3TG-00386-ABAA-TCZZA Issue: 01 DRAFT DRAFT Nokia FastMile 4G Receiver Product Overview Management using the Nokia Wireless app Figure 21 the Nokia Altiplano FastMile Controller through NETCONF Screen with prompt to scan the QR code for unit managed by Tap on Scan to start the scan of the QR code. Use the viewfinder of the phone to align with the QR code. Figure 22 shows the QR code screen. Issue: 01 DRAFT 3TG-00386-ABAA-TCZZA 65 DRAFT Management using the Nokia Wireless app Nokia FastMile 4G Receiver Product Overview Figure 22 FastMile Controller through NETCONF QR code screen for unit managed by the Nokia Altiplano 3 The Nokia Wireless app displays the screen to install the Nolia FastMile 4G Receiver. Tap on the Already Installed? option. Figure 23 shows the Already Installed option. 66 3TG-00386-ABAA-TCZZA Issue: 01 DRAFT DRAFT Nokia FastMile 4G Receiver Product Overview Management using the Nokia Wireless app Figure 23 Screen showing the Already Installed option for unit managed by the Nokia Altiplano FastMile Controller through NETCONF 4 The Nokia Wireless app prompts you to connect to the Nokia FastMile 4G Receiver. The connection will be done through a VPN. You will need to be close to the Nokia FastMile 4G Receiver and you will need to have Bluetooth enabled on the mobile phone and accept the pairing request when it appears. Figure 24 shows the screen to connect to the Nokia FastMile 4G Receiver. Issue: 01 DRAFT 3TG-00386-ABAA-TCZZA 67 DRAFT Management using the Nokia Wireless app Nokia FastMile 4G Receiver Product Overview Figure 24 Screen for connecting to the Nokia FastMile 4G Receiver Connect to the Nokia FastMile 4G Receiver by tapping on Connect. 5 The Nokia Wireless app prompts you to enable the VPN profile for a secure method to communicate with the Nokia FastMile 4G Receiver. Figure 25 shows the screen to enable the VPN profile. 68 3TG-00386-ABAA-TCZZA Issue: 01 DRAFT DRAFT Nokia FastMile 4G Receiver Product Overview Management using the Nokia Wireless app Figure 25 Screen for enabling the VPN profile Enable the VPN profile by tapping on Connect. 6 The android system of the mobile phone prompts you to accept the connection request. Figure 26 shows the prompt to accept the connection request. Issue: 01 DRAFT 3TG-00386-ABAA-TCZZA 69 DRAFT Management using the Nokia Wireless app Nokia FastMile 4G Receiver Product Overview Figure 26 Prompt for accepting the connection request Accept the connection request by tapping on OK. 7 The Nokia Wireless app prompts you to log in to the Nokia FastMile 4G Receiver. You will need to input the username and password for the Nokia FastMile 4G Receiver. Figure 27 shows the screen to log in to the Nokia FastMile 4G Receiver. 70 3TG-00386-ABAA-TCZZA Issue: 01 DRAFT DRAFT Nokia FastMile 4G Receiver Product Overview Management using the Nokia Wireless app Figure 27 Screen to log in to a Nokia FastMile 4G Receiver managed by the Nokia Altiplano FastMile Controller Log in to the Nokia FastMile 4G Receiver by tapping on Log in. After you have logged in, you can:

view information for the Nokia FastMile 4G Receiver: see step 8 upload updated certificates to the Nokia FastMile 4G Receiver: see step 9 change the configuration settings to the default factory load settings; see step 11 reboot the Nokia FastMile 4G Receiver: see step 10 8 You can view the following information for a Nokia FastMile 4G Receiver managed by the Nokia Altiplano FastMile Controller by selecting the Connection Status option of the main screen and scrolling through the screen by swiping up or down:

LTE cell info:

connection state: Does the Nokia FastMile 4G Receiver connect to this cell 71 Issue: 01 DRAFT 3TG-00386-ABAA-TCZZA DRAFT Management using the Nokia Wireless app Nokia FastMile 4G Receiver Product Overview status: The current operational state of the PDN connection EARFCN: The carrier frequency in the uplink and downlink is designated by the E-UTRA. Absolute Radio Frequency Channel Number (EARFCN) in the range 0 - 65535. PCI: The physical cellid of cell Current signal stats:

RSRP: RSRP (Reference Signals Received Power) is a measurement of the received power level in an LTE cell network in dBm RSRQ:

RSRQ (Reference Signals Received Quality) is a measurement of the received power quality in an LTE cell network in dB RSSI: RSSI (Received Signal Strength Indicator) is a measurement of the power present in a received radio signal by the Nokia FastMile 4G Receiver SINR: SINR (the Signal-to-Interference-plus-Noise ratio) is used in the LTE network from the Nokia FastMile 4G Receiver side to measure the quality of wireless connections in dB Average signal stats:

RSRP: average value of Reference Signal Received Power (dBm) in the measured interval, resolution 1dBm RSRQ: average value of Reference Signal Received Quality (dB) in the measured interval, resolution 1dB RSSI: average value of Received Signal Strength indicator (dBm) in the measured interval, resolution 1 SINR: average value of Signal-to-Interference-plus-Noise Ratio

(dB) in the measured interval, resolution 1dB Other stats:

bytes sent: the total number of bytes sent on the interface bytes received: the total number of bytes received on the interface Figure 28 shows an example of the System state screen. 72 3TG-00386-ABAA-TCZZA Issue: 01 DRAFT DRAFT Nokia FastMile 4G Receiver Product Overview Management using the Nokia Wireless app Figure 28 System state screen example for a Nokia FastMile 4G Receiver managed by the Nokia Altiplano FastMile Controller Note The Nokia Wireless app will display a value of N/A for parameters that are not supported by the installed Home 4G Receiver Software version. The following additional Beam Angle information is displayed only for an ABA version as shown in Figure 29:

Antenna mode: wide or narrow Horizontal angle: the horizontal angle is expressed as a degree if the Antenna mode is narrow or as N/A if the antenna mode is wide Issue: 01 DRAFT 3TG-00386-ABAA-TCZZA 73 DRAFT Management using the Nokia Wireless app Nokia FastMile 4G Receiver Product Overview Figure 29 FastMile 4G Receiver managed by the Nokia Altiplano FastMile Controller System state screen with Beam Angle information for a Nokia 9 You can upload updated certificates (stored under downloads in the mobile phone's directory) to the Nokia FastMile 4G Receiver. i Tap on the Upload CA certificates option. Figure 30 shows the screen that has the Upload CA certificates option. 74 3TG-00386-ABAA-TCZZA Issue: 01 DRAFT DRAFT Nokia FastMile 4G Receiver Product Overview Management using the Nokia Wireless app Figure 30 Screen that has the Upload CA certificates option for a Nokia FastMile 4G Receiver managed by the Nokia Altiplano FastMile Controller ii Select the required CA certificates and tap on Ok. Note that the certificates must be in the download folder of the mobile phone before you can upload them to the Nokia FastMile 4G Receiver. Figure 31 shows the screen that lists the CA certificates. Issue: 01 DRAFT 3TG-00386-ABAA-TCZZA 75 DRAFT Management using the Nokia Wireless app Nokia FastMile 4G Receiver Product Overview Figure 31 Receiver managed by the Nokia Altiplano FastMile Controller Screen that lists the CA certificates for a Nokia FastMile 4G The following CA certificates are supported for a Nokia FastMile 4G Receiver managed by the Nokia Altiplano FastMile Controller through TR-069:

logserverCA.pem (used for authenticating the log server) pmaCA.pem (used for authenticating the Nokia Altiplano FastMile Controller) swserverCA.pem (used for authenticating the software upgrade server) diagserverCA.pem (used for authenticating the optional diagnostics server) iii Figure 32 shows the screen that indicates that uploading of the CA certificates was successful. 76 3TG-00386-ABAA-TCZZA Issue: 01 DRAFT DRAFT Nokia FastMile 4G Receiver Product Overview Management using the Nokia Wireless app Figure 32 Screen indicating that uploading of the CA certificates was successful for a Nokia FastMile 4G Receiver managed by the Nokia Altiplano FastMile Controller Tap on Ok to clear the message. 10 You can reboot a Nokia FastMile 4G Receiver managed by the Nokia Altiplano FastMile Controller through NETCONF by tapping on the Reboot Device option. Figure 33 shows the Reboot Device option. Issue: 01 DRAFT 3TG-00386-ABAA-TCZZA 77 DRAFT Management using the Nokia Wireless app Nokia FastMile 4G Receiver Product Overview Figure 33 Screen showing the Reboot Device option for a Nokia FastMile 4G Receiver managed by the Nokia Altiplano FastMile Controller The screen shows the reboot message indicating that the Bluetooth connection will be interrupted and that you will be disconnected. Figure 34 shows the screen that has the reboot message. 78 3TG-00386-ABAA-TCZZA Issue: 01 DRAFT DRAFT Nokia FastMile 4G Receiver Product Overview Management using the Nokia Wireless app Figure 34 Receiver managed by the Nokia Altiplano FastMile Controller Screen showing the reboot message for a Nokia FastMile 4G Press the Reboot option if you want to proceed with the reboot, or press the Cancel option. If you pressed the Reboot option, press OK. 11 You can change the configuration settings for a Nokia FastMile 4G Receiver managed by the Nokia Altiplano FastMile Controller through NETCONF to the default factory load settings by tapping on the Perform Factory Reset option. Figure 35 shows the Perform Factory Reset option. Issue: 01 DRAFT 3TG-00386-ABAA-TCZZA 79 DRAFT Management using the Nokia Wireless app Nokia FastMile 4G Receiver Product Overview Figure 35 Screen showing the Perform Factory Reset option for a Nokia FastMile 4G Receiver managed by the Nokia Altiplano FastMile Controller The screen shows the factory reset message indicating that the factory reset will reset the device back to factory settings and that all changes will be lost and that you will be disconnected. Figure 36 shows the screen that has the factory reset message. Figure 36 Screen showing the factory reset message for a Nokia FastMile 4G Receiver managed by the Nokia Altiplano FastMile Controller 80 3TG-00386-ABAA-TCZZA Issue: 01 DRAFT DRAFT Nokia FastMile 4G Receiver Product Overview Management using the Nokia Wireless app Press the Reset option if you want to proceed with the reset to factory settings, or press the Cancel option. If you pressed the Reset option, press OK. 13.3 Using the Nokia Wireless app to manage a unit managed by an ACS If an ACS is being used for remote management of the Nokia FastMile 4G Receiver (through TR-069), you can use the Nokia Wireless app to perform management activities on the Nokia FastMile 4G Receiver after it has been installed, such as viewing information, uploading CA certificates, and rebooting, as described in the following procedure. You will need the QR code that was saved as described during installation of the Nokia FastMile 4G Receiver in order to scan it when logging in to the 4G Receiver Issue: 01 DRAFT 3TG-00386-ABAA-TCZZA 81 DRAFT Management using the Nokia Wireless app Nokia FastMile 4G Receiver Product Overview through the Nokia Wireless app. Logging in to the Nokia FastMile 4G Receiver also includes the following:

initiating a Bluetooth connection enabling Bluetooth allowing the Bluetooth pairing request establishing the VPN connection entering the username and password Procedure 6 To perform management activities Use the following procedure to use the Nokia Wireless app to perform management activities for a Nokia FastMile 4G Receiver that is managed remotely by an ACS through TR-069. 1 When you are close to the Nokia FastMile 4G Receiver, connect the mobile phone to the Internet and open the Nokia Wireless app on the phone. An introductory screen with a video appears. Figure 37 shows the introductory screen. 82 3TG-00386-ABAA-TCZZA Issue: 01 DRAFT DRAFT Nokia FastMile 4G Receiver Product Overview Management using the Nokia Wireless app Figure 37 Introductory screen for unit managed by an ACS through TR-069 Continue by tapping on Get started. 2 After the introductory screen has cleared, the Nokia Wireless app shows an animation of how to scan the QR code of the Nokia FastMile 4G Receiver so that the app can obtain the MAC address, unique device identifier, enterprise id, and device type of the Nokia FastMile 4G Receiver. The QR code was provided on a sheet of paper in the shipping package of the Nokia FastMile 4G Receiver. The sheet of paper, or a photograph of it, should have been saved and made available for anyone who later needs to scan the QR code when accessing the Nokia FastMile 4G Receiver. Figure 38 shows the screen for the prompt to scan the QR code. Issue: 01 DRAFT 3TG-00386-ABAA-TCZZA 83 DRAFT Management using the Nokia Wireless app Nokia FastMile 4G Receiver Product Overview Figure 38 Screen with prompt to scan the QR code for unit managed by an ACS through TR-069 Tap on Scan to start the scan of the QR code. Use the viewfinder of the phone to align with the QR code. Figure 39 shows the QR code screen. 84 3TG-00386-ABAA-TCZZA Issue: 01 DRAFT DRAFT Nokia FastMile 4G Receiver Product Overview Management using the Nokia Wireless app Figure 39 QR code screen for unit managed by an ACS through TR-069 3 The Nokia Wireless app displays the screen to install the Nolia FastMile 4G Receiver. Tap on the Already Installed? option. Figure 40 shows the Already Installed option. Issue: 01 DRAFT 3TG-00386-ABAA-TCZZA 85 DRAFT Management using the Nokia Wireless app Nokia FastMile 4G Receiver Product Overview Figure 40 Screen showing the Already Installed option for unit managed by an ACS through TR-069 4 The Nokia Wireless app prompts you to connect to the Nokia FastMile 4G Receiver. The connection will be done through a VPN. You will need to be close to the Nokia FastMile 4G Receiver and you will need to have Bluetooth enabled on the mobile phone and accept the pairing request when it appears. Figure 41 shows the screen to connect to the Nokia FastMile 4G Receiver. 86 3TG-00386-ABAA-TCZZA Issue: 01 DRAFT DRAFT Nokia FastMile 4G Receiver Product Overview Management using the Nokia Wireless app Figure 41 Screen for connecting to the Nokia FastMile 4G Receiver Connect to the Nokia FastMile 4G Receiver by tapping on Connect. 5 The Nokia Wireless app prompts you to enable the VPN profile for a secure method to communicate with the Nokia FastMile 4G Receiver. Figure 42 shows the screen to enable the VPN profile. Issue: 01 DRAFT 3TG-00386-ABAA-TCZZA 87 DRAFT Management using the Nokia Wireless app Nokia FastMile 4G Receiver Product Overview Figure 42 Screen for enabling the VPN profile Enable the VPN profile by tapping on Connect. 6 The android system of the mobile phone prompts you to accept the connection request. Figure 43 shows the prompt to accept the connection request. 88 3TG-00386-ABAA-TCZZA Issue: 01 DRAFT DRAFT Nokia FastMile 4G Receiver Product Overview Management using the Nokia Wireless app Figure 43 Prompt for accepting the connection request Accept the connection request by tapping on OK. 7 The Nokia Wireless app prompts you to log in to the Nokia FastMile 4G Receiver. You will need to input the username and password for the Nokia FastMile 4G Receiver. Figure 44 shows the screen to log in to the Nokia FastMile 4G Receiver. Issue: 01 DRAFT 3TG-00386-ABAA-TCZZA 89 DRAFT Management using the Nokia Wireless app Nokia FastMile 4G Receiver Product Overview Figure 44 Screen to log in to a Nokia FastMile 4G Receiver managed by an ACS through TR-069 Log in to the Nokia FastMile 4G Receiver by tapping on Log in. After you have logged in, you can:

view information for the Nokia FastMile 4G Receiver: see step 8 upload updated certificates to the Nokia FastMile 4G Receiver: see step 9 reboot the Nokia FastMile 4G Receiver: see step 10 8 You can view the following information for a Nokia FastMile 4G Receiver managed by an ACS by selecting the Connection Status option of the main screen and scrolling through the screen by swiping up or down:

LTE cell info:

connection state: Does the Nokia FastMile 4G Receiver connect to this cell status: The current operational state of the PDN connection EARFCN: The carrier frequency in the uplink and downlink is designated by the E-UTRA. 90 3TG-00386-ABAA-TCZZA Issue: 01 DRAFT DRAFT Nokia FastMile 4G Receiver Product Overview Management using the Nokia Wireless app Absolute Radio Frequency Channel Number (EARFCN) in the range 0 - 65535. PCI: The physical cellid of cell Current signal stats: RSRP: RSRP (Reference Signals Received Power) is a measurement of the received power level in an LTE cell network in dBm RSRQ: RSRQ (Reference Signals Received Quality) is a measurement of the received power quality in an LTE cell network expressed as a ratio RSSI: RSSI (Received Signal Strength Indicator) is a measurement of the power present in a received radio signal by the Nokia FastMile 4G Receiver in dBm SINR: SINR (the Signal-to-Interference-plus-Noise ratio) is used in the LTE network from the Nokia FastMile 4G Receiver side to measure the quality of wireless connections in dB Other stats:

bytes sent: the total number of bytes sent on the interface bytes received: the total number of bytes received on the interface Figure 45 shows an example of the System state screen. Figure 45 System state screen example for a Nokia FastMile 4G Receiver managed by an ACS Issue: 01 DRAFT 3TG-00386-ABAA-TCZZA 91 DRAFT Management using the Nokia Wireless app Nokia FastMile 4G Receiver Product Overview Note The Nokia Wireless app will display a value of N/A for parameters that are not supported by the installed Home 4G Receiver Software version. The following additional Beam Angle information is displayed only for an ABA version as shown in Figure 46:

Antenna mode: wide or narrow Horizontal angle: the horizontal angle is expressed as a degree if the Antenna mode is narrow or as N/A if the antenna mode is wide Figure 46 FastMile 4G Receiver managed by an ACS System state screen with Beam Angle information for a Nokia 9 You can upload updated certificates (stored under downloads in the mobile phone's directory) to the Nokia FastMile 4G Receiver. i Tap on the Upload CA certificates option. Figure 47 shows the screen that has the Upload CA certificates option. 92 3TG-00386-ABAA-TCZZA Issue: 01 DRAFT DRAFT Nokia FastMile 4G Receiver Product Overview Management using the Nokia Wireless app Figure 47 Screen that has the Upload CA certificates option for a Nokia FastMile 4G Receiver managed by an ACS ii Select the required CA certificates and tap on Ok. Note that the certificates must be in the download folder of the mobile phone before you can upload them to the Nokia FastMile 4G Receiver. The following CA certificates are supported for a Nokia FastMile 4G Receiver Nokia FastMile 4G Receiver managed by an ACS:

logserverCA.pem (used for authenticating the log server) swserverCA.pem (used for authenticating the software upgrade server) diagserverCA.pem (used for authenticating the optional diagnostics server) acsCA.pem (used for authenticating the ACS) iii The screen indicates when uploading of the CA certificates was successful. Tap on Ok to clear the message. 93 Issue: 01 DRAFT 3TG-00386-ABAA-TCZZA DRAFT Management using the Nokia Wireless app Nokia FastMile 4G Receiver Product Overview 10 You can reboot a Nokia FastMile 4G Receiver managed by an ACS through TR-069 by tapping on the Reboot Device option. Figure 48 shows the Reboot Device option. Figure 48 Screen showing the Reboot Device option for a Nokia FastMile 4G Receiver managed by an ACS When you reboot the Nokia FastMile 4G Receiver, the screen shows the reboot message indicating that the Bluetooth connection will be interrupted and that you will be disconnected. Press the Reboot option if you want to proceed with the reboot, or press the Cancel option. If you pressed the Reboot option, press OK. 94 3TG-00386-ABAA-TCZZA Issue: 01 DRAFT DRAFT Nokia FastMile 4G Receiver Product Overview Management using the Web UI 14 Management using the Web UI 14.1 Using the Web UI to manage the Nokia FastMile 4G Receiver 14.2 Using the Web UI status screen 14.3 Using the Web UI network screen 14.4 Using the Web UI system screen 14.1 Using the Web UI to manage the Nokia FastMile 4G Receiver After the Nokia FastMile 4G Receiver has been installed, you can use the Web UI to perform some management-type activities on a Nokia FastMile 4G Receiver that is managed by an ACS through TR-069. See section 6.1.2 for more information about the Web UI. The Web UI provides the following screens to provide support for management of the Nokia FastMile 4G Receiver:

Status screen: allows viewing of FastMile 4G Receiver status parameter values, Network screen: allows configuration of specific FastMile 4G Receiver parameters (login is required), see section 14.3 System screen: allows performing of advanced system actions (login is required), see section 14.2 see section 14.4 14.2 Using the Web UI status screen The Web UI status screen allows you to view FastMile 4G Receiver status parameters. No login is required. The following parameters are shown:

The attached cell The Signal Strength of the attached cell: This animated model shows the RSRP

(Reference Signals Received Power) of the attached cell The RSSI (Received Signal Strength Indication) of the attached cell The RSRQ (Reference Signal Received Quality) of the attached cell The SINR (Signal to Interference and Noise Ratio) of the attached cell Issue: 01 DRAFT 3TG-00386-ABAA-TCZZA 95 DRAFT Management using the Web UI Nokia FastMile 4G Receiver Product Overview Total number of MB sent on the LTE interface since last FastMile 4G Receiver restart Receiver restart Receiver restart Receiver restart Total number of MB received on the LTE interface since last FastMile 4G Total number of MB sent on the Ethernet interface since last FastMile 4G Total number of MB received on the Ethernet interface since last FastMile 4G Data Model (TR-069) Software Version Name and corresponding IP address of the configured Access Points Figure 49 shows an example of the Status screen when the FastMile 4G Receiver is not connected to a cell. Figure 49 Example of the Status screen when the FastMile 4G Receiver is not connected to a cell Figure 50 shows an example of the Status screen when the FastMile 4G Receiver is connected to a cell. 96 3TG-00386-ABAA-TCZZA Issue: 01 DRAFT DRAFT Nokia FastMile 4G Receiver Product Overview Management using the Web UI Figure 50 Example of the Status screen when the FastMile 4G Receiver is connected to a cell 14.3 Using the Web UI network screen The Web UI network screen allows you to perform FastMile4G Receiver configuration actions. Login is required. For details on the Web UI login, please refer to the Customer Release Notes. The following configuration capabilities are supported:

Configuration of ACS URL Configuration of ACS username Configuration of ACS password Configuration of Connection Request Port Configuration of Connection Request Username Configuration of Connection Request Password Configuration of Periodic Inform Interval Configuration of Periodic Inform Request Setting of location; that is, geocoordinates (latitude and longitude) Issue: 01 DRAFT 3TG-00386-ABAA-TCZZA 97 DRAFT Management using the Web UI Nokia FastMile 4G Receiver Product Overview Configuration of Access Points (up to one default AP in router mode and up to four APs in bridge mode; a total of five APs can be configured). AP configuration includes configuration of:

forwarding mode (router or bridge) AP name Username Password VLAN MTU size subnet mask Note that the default APN cannot be deleted Configuration of cell list (up to nine cells can be configured) Configuration of the DHCP server for router mode Uploading of CA certificates Note CA certificates must be pre-downloaded to the laptop so that they can be browsed and found via the 'Upload Certificate'

action. The CA Certificates must comply to the naming rules required by the FastMile4G Receiver. The following CA certificates are supported:

logserverCA.pem (used for authenticating the log server) swserverCA.pem (used for authenticating the software upgrade server) diagserverCA.pem (used for authenticating the optional diagnostics server) acsCA.pem (used for authenticating the ACS) Figure 51 shows an example of the Login screen. 98 3TG-00386-ABAA-TCZZA Issue: 01 DRAFT DRAFT Nokia FastMile 4G Receiver Product Overview Management using the Web UI Figure 51 Example of the Login screen Figure 52 shows an example of the Network screen. Issue: 01 DRAFT 3TG-00386-ABAA-TCZZA 99 DRAFT Management using the Web UI Nokia FastMile 4G Receiver Product Overview Figure 52 Example of the Network screen Figure 53 shows an example of scroll down for the Network screen. 100 3TG-00386-ABAA-TCZZA Issue: 01 DRAFT DRAFT Nokia FastMile 4G Receiver Product Overview Management using the Web UI Figure 53 Example of scroll down for the Network screen Figure 54 shows an example of the Add Access Point window. Issue: 01 DRAFT 3TG-00386-ABAA-TCZZA 101 DRAFT Management using the Web UI Nokia FastMile 4G Receiver Product Overview Figure 54 Example of the Add Access Point window Figure 55 shows an example of the Delete APN window. 102 3TG-00386-ABAA-TCZZA Issue: 01 DRAFT DRAFT Nokia FastMile 4G Receiver Product Overview Management using the Web UI Figure 55 Example of the Delete APN window Figure 56 shows an example of the Edit Location window. Issue: 01 DRAFT 3TG-00386-ABAA-TCZZA 103 DRAFT Management using the Web UI Nokia FastMile 4G Receiver Product Overview Figure 56 Example of the Edit Location window Figure 57 shows an example of the Edit Controller window (used to configure ACS-

related parameters). 104 3TG-00386-ABAA-TCZZA Issue: 01 DRAFT DRAFT Nokia FastMile 4G Receiver Product Overview Management using the Web UI Figure 57 Example of the Edit Controller window Figure 58 shows an example of the Edit DHCP window. Issue: 01 DRAFT 3TG-00386-ABAA-TCZZA 105 DRAFT Management using the Web UI Nokia FastMile 4G Receiver Product Overview Figure 58 Example of the Edit DHCP window Figure 59 shows an example of the Certificates information window that opens when you click on Upload Certificate. 106 3TG-00386-ABAA-TCZZA Issue: 01 DRAFT DRAFT Nokia FastMile 4G Receiver Product Overview Management using the Web UI Figure 59 Example of the Certificates information window Figure 60 shows an example of the Add Cell window. Issue: 01 DRAFT 3TG-00386-ABAA-TCZZA 107 DRAFT Management using the Web UI Nokia FastMile 4G Receiver Product Overview Figure 60 Example of the Add Cell window Figure 61 shows an example of the Delete Cell window. 108 3TG-00386-ABAA-TCZZA Issue: 01 DRAFT DRAFT Nokia FastMile 4G Receiver Product Overview Management using the Web UI Figure 61 Example of the Delete Cell window 14.4 Using the Web UI system screen The Web UI system screen allows you to perform advanced system actions on the FastMile 4G Receiver. Login is required. For details on the Web UI login, please refer to the Customer Release Notes. The following advanced system capabilities are supported:

Restart device: the FastMile 4G Receiver configuration remains intact Restore factory settings: factory configuration of the FastMile 4G Receiver is used;

subsequent configuration is lost Update firmware:

before doing any firmware update action, make sure that the update path from the existing firmware to new firmware is supported by the FastMile 4G Receiver new image is installed in the FastMile 4G Receiver; the FastMile 4G Receiver configuration remains intact Figure 62 shows an example of the System screen. Issue: 01 DRAFT 3TG-00386-ABAA-TCZZA 109 DRAFT Management using the Web UI Nokia FastMile 4G Receiver Product Overview Figure 62 Example of the System screen Figure 63 Example of the Restart Device confirmation window Figure 63 shows an example of the Restart Device confirmation window. 110 3TG-00386-ABAA-TCZZA Issue: 01 DRAFT DRAFT Nokia FastMile 4G Receiver Product Overview Management using the Web UI Figure 64 shows an example of the Restore Device confirmation window used to restore the device to factory settings. Figure 64 Example of the Restore Device confirmation window Figure 65 shows an example of the screen that displays while firmware is being updated. Issue: 01 DRAFT 3TG-00386-ABAA-TCZZA 111 DRAFT Management using the Web UI Nokia FastMile 4G Receiver Product Overview Figure 65 Example of the screen that displays while firmware is being updated 112 3TG-00386-ABAA-TCZZA Issue: 01 DRAFT DRAFT Nokia FastMile 4G Receiver Product Overview Management using the Web UI Issue: 01 DRAFT 3TG-00386-ABAA-TCZZA 113 DRAFT Nokia FastMile 4G Receiver Product Overview Standards certification 15 Standards certification 15.1 Standards certification for Compact mono-band and ABA models 15.2 Standards certification for the Compact multi-band models 15.1 Standards certification for Compact mono-

band and ABA models Table 16 provides standards certification information for the Compact mono-band and ABA models of the Nokia FastMile 4G Receiver. Table 16 Category RF EMC RoHS Safety Standards certifications for the Nokia FastMile 4G Receiver Compact mono-band and ABA models Certifications EN 301 908-13 for Band 3, 7, 38, 40, 42, 43 of the Compact mono-band models and Band 42, 43 of the ABA model FCC 47 Parts 27 for Band 7 and 41 of the Compact mono-band models ISED for Band 42 and 43 of the ABA model ETSI EN 301 489-1 and -52 for Band 3, 7, 38, 40, 42, 43 of the Compact mono-band models and Band 42, 43 of the ABA model FCC 47 part 2/15 for Band 7 and 41 of the Compact mono-band models ISED for Band 42 and 43 of the ABA model Directive 2011/65/EU EN/IEC 60950-1; 60950-22 UL 62368-1, UL 60950-22,UL 50E, EN/IEC 60529 (IP66) The CE mark is valid for Band 3, 7, 38, 40, 42, 43 of the Compact mono-band models and Band 42, 43 of the ABA models. The FCC ID is valid for Band 7 and 41 of the Compact mono-band models. See section 18.1 for the FCC ID for each model. The ISED ID is valid for Band 42 and 43 of the ABA model. See chapter 18 for FCC statements and label instructions. Standards certification 114 3TG-00386-ABAA-TCZZA Issue: 01 DRAFT DRAFT Nokia FastMile 4G Receiver Product Overview 15.2 Standards certification for the Compact multi-

band models Table 17 provides standards certification information for the Compact multi-band models of the Nokia FastMile 4G Receiver. Table 17 Category RF EMC RoHS Safety Standards certifications for the Nokia FastMile 4G Receiver Compact multi-band models Certifications EN 301 908-13 for Band 1, 3, 7, 20, 28, 38, 40 of the Compact multi-band 4G05-A model and Band 3, 7, 20, and 32 of the Compact multi-band 4G04-A model FCC 47 Part 27 for Band 41 of the Compact multi-band 4G05-A model ETSI EN 301 489-1 and -52 for Band 1, 3, 7, 20, 28, 38, 40 of the Compact multi-band 4G05-

A model and Band 3, 7, 20, 32 of the Compact multi-band 4G04-A model FCC 47 part 2/15 for Band 41 of the Compact multi-band 4G05-A model Directive 2011/65/EU EN/IEC 60950-1; 60950-22 UL 62368-1, UL 60950-22,UL 50E, EN/IEC 60529 (IP66) The CE mark is valid for Band 3, 7, 20, 32 of the Compact multi-band 4G04-A model and Band 1, 3, 7, 20, 28, 38, 40 of the Compact multi-band 4G05-A model. The FCC ID is valid for Band 41 of the Compact multi-band 4G05-A model. See See section 18.1 for the FCC ID for each model. See chapter 18 for FCC statements and label instructions. Appendix A: Specifications 16 Appendix A: Specifications 16.1 Specifications 16.1 Specifications Table 18 provides some specifications for the Nokia FastMile 4G Receiver. Table 18 Specifications for the Nokia FastMile 4G Receiver Item Description Issue: 01 DRAFT 3TG-00386-ABAA-TCZZA 115 DRAFT Nokia FastMile 4G Receiver Product Overview Dimensions Weight Power consumption Operating altitude Non-operating altitude Operating temperature Storage temperature Operating humidity Storage humidity IP rating Compact multi-band models: 22.7 cm by 22.7 cm by 6.4 cm

(8.94 in by 8.94 in by 2.52 in) Compact mono-band models: 23.5 cm by 23.5 cm by 5.2 cm

(9.3 in by 9.3 in by 2 in) ABA: 31.8 cm by 31.8 cm by 5.6 cm (12.5 in by 12.5 in by 2.2 in) Compact multi-band models: 0.88 kg (1.9 lb) Compact mono-band models: 1.3 kg (2.9 lb) ABA: 2 kg (4.4. lb) 7 w Maximum operating altitude is 3048 m (10 000 ft) above mean sea level Maximum non-operating altitude is 12 192 m (40 000 ft) above mean sea level Compact mono-band and ABA models: 30C to 65C (22F to 149F) Compact multi-band models: 30C to 55C (

22F to 131F) 40C to 85C (85F to 185F) 5% to 85% relative humidity, non-condensing 5% to 93% relative humidity, non-condensing IP66 TYPE3 Appendix A: Specifications 116 3TG-00386-ABAA-TCZZA Issue: 01 DRAFT DRAFT Nokia FastMile 4G Receiver Product Overview Appendix B: RF exposure 17 Appendix B: RF exposure 17.1 RF exposure 17.1 RF exposure The international standard used for the assessment of this device provides simple conformity assessment methods for low power electronic and electrical equipment to an exposure limit relevant to electromagnetic fields (EMF). Based on the compliance criteria for maximum permissible exposure as in EN 50385:2017 and CE Council Recommendation Directive 2014/53/EU, there should be a minimum of 50 cm (20 in) separation distance from the user for Band 3, 7, 38, 40, 42, 43 of the Compact mono-band models and Band 42, 43 of the ABA model. Based on the compliance criteria for maximum permissible exposure as in EN 50385:2017 and CE Council Recommendation Directive 2014/53/EU, there should be a minimum of 50 cm (20 in) separation distance from the user for Band 3, 7, 20, 32 of the Compact multi-band 4G04-A model and Band 1, 3, 7, 20, 28, 38, 40 of the Compact multi-band 4G05-A model. Based on the compliance criteria for maximum permissible exposure as in FCC 47 Part 27, there should be a minimum of 50 cm (20 in) separation distance from the user for Band 41 of the Compact multi-band 4G05-A model. Appendix B: RF exposure Issue: 01 DRAFT 3TG-00386-ABAA-TCZZA 117 DRAFT Nokia FastMile 4G Receiver Product Overview Appendix C: FCC statements and label instructions 18 Appendix C: FCC statements and label instructions 18.1 FCC compliance statement 18.2 FCC radiation exposure statement 18.3 FCC label instructions 18.1 FCC compliance statement Table 19 provides the FCC ID for the Nokia FastMile 4G Receiver. Table 19 FCC ID for Nokia FastMile 4G Receiver Model 4G01-A 4G01-B 4G02-A 4G03-A 4G05-A FCC ID 2ADZR34003800FM20 2ADZR34003800FM201 Not applicable 2ADZR23002690FM20 2ADZR4G05A Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1) This device may not cause harmful interference, and 2) This device must accept any interference received, including Interference that may cause undesired operation. 18.2 FCC radiation exposure statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 50 cm (20 in) between the radiator and your body. Appendix C: FCC statements and label instructions 118 3TG-00386-ABAA-TCZZA Issue: 01 DRAFT DRAFT Nokia FastMile 4G Receiver Product Overview Glossary 19 Glossary This glossary provides the expansions and optional descriptions of most acronyms and initialisms that appear in this document. 3rd Generation Partnership Project Automated Beam Alignment 3GPP ABA ACS ALED ANSI AP APN CA CRoHS DSCP DUID ECI EPC EIP EMC EMI EPC ESD ETL Auto Configuration Server Alcatel-Lucent Electronic Download American National Standards Institute Access Point Access Point Name Certificate Authority or Carrier Aggregation China Restriction of Hazardous Substances Differentiated Services Code Point Device Unique Identifier External Call Interface Evolved Packet Core Electronic Information Products Electromagnetic Compatibility Electromagnetic Interference Evolved Packet Core Electrostatic Discharge Electrotechnical Laboratory EARFCN E-UTRA Absolute Radio Frequency Channel Number E-UTRA Evolved Universal Terrestrial Radio Access Issue: 01 DRAFT 3TG-00386-ABAA-TCZZA 119 DRAFT Nokia FastMile 4G Receiver Product Overview Maximum Concentration Value or Minimum Concentration Value European Telecommunications Standards Institute Federal Communications Commission Frequency Division Duplex FastMile Home Subscriber Server Institute of Electrical and Electronics Engineers International Protection or Internet Protocol Internet Protocol over Television Local Area Network Light Emitting Diode Long-Term Evolution Media Access Control Multiple-Input Multiple-Output Mobility Management Entity Network Access Control National Electrical Code Operations and Maintenance On-line Customer Support Physical Cell Identifier Policy and Charging Rules Function Portable Document Format Personal Identification Number Power over Ethernet QoS Class Identifier Quality of Service Quick Response ETSI FCC FDD FM Glossary HSS IEEE IP IPTV LAN LED LTE MAC MCV MIMO MME NAC NEC OAM OLCS PCI PCRF PDF PIN PoE QCI QoS QR 120 3TG-00386-ABAA-TCZZA Issue: 01 DRAFT DRAFT Nokia FastMile 4G Receiver Product Overview RF RoHS RSRP RSRQ RSSI SIM SINR TCP TDD UDP UL URL VDC VoIP VPN WiFi ZIP Radio Frequency Restriction of Hazardous Substances Reference Signal Received Power Reference Signal Received Quality Received Signal Strength Indicator Subscriber Identify Module Signal-to-Interference-plus-Noise Ratio Transmission Control Protocol Time Division Duplex User Datagram Protocol Underwriters Laboratories Uniform Resource Locater Volts Direct Current Voice over Internet Protocol Virtual Private Network Wireless Fidelity Compressed File Glossary Issue: 01 DRAFT 3TG-00386-ABAA-TCZZA 121 DRAFT Glossary Nokia FastMile 4G Receiver Product Overview 122 3TG-00386-ABAA-TCZZA Issue: 01 DRAFT DRAFT Customer document and product support Customer documentation Customer Documentation Welcome Page Technical Support Customer Documentation Technical Support Documentation feedback Customer Documentation Feedback Copyright 2019 Nokia. 3TG-00386-ABAA-TCZZA

NOKIA FastMile Receiver PUA ATTA Model: 4G05-A P/N: 3TGOO171AAAA de in Chi tn eee PUINO MTVU UT A ICS:XX MRev:XX MFG Year:XX Wk:XX S/N: XXXXXXXXXXXXX IMEI:

eo DUNN A C Dx FE i. MAC: XXXXXXXXXXX LISTED 5012307

Nokia Shanghai Bell Co. Ltd. No. 388, Ningqiao Rd.Pilot Free Trade Zone,Shanghai,China Tel: 86-21-38439795 Fax: 86-21-38430001-1119 Date: September 3, 2019 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Request for Confidentiality FCC ID: 2ADZR4GO5A To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commissions rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Part List Operational Description Tune-up Procedure Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission s policy, in order to comply with the marketing regulations in 47 CFT 2.803 and the importation rules in 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachment(s) for 180 days after the grant as outlined in Public Notice DA 04-1705. External Photos Internal Photos Test Setup Photos User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards, Yong Tu Yong Tu Yong.tu@nokia-sbell.com