INSTR,INSTL,ITI/GE 4 BTN FOB - FILE NAME: 235166 AX1 - INK: BLACK - MATERIAL: 20 LB. MEAD BOND - SIZE: 8.500 X 5.500 - FOLDING: 3 FOLD ALTERNATE, FINISH WITH LOGO SHOWING - SCALE: 1-1 PRINTERS INSTRUCTIONS:
ITIFOB01 4-BUTTON KEY FOB TRANSMITTER Operation Instructions USA & Canada (800) 421-1587 & (800) 392-0123
(760) 438-7000 - Toll Free FAX (800) 468-1340 www.linearcorp.com PROGRAMMING 1 REFER TO THE SECURITY SYSTEM'S INSTRUCTIONS AND PLACE THE RECEIVER IN PROGRAM MODE 2 PRESS A BUTTON ON THE TRANSMITTER TO SEND A SIGNAL 3 4 5 VERIFY THAT THE TRANSMITTER HAS BEEN "LEARNED" BY THE RECEIVER SET ANY OTHER SYSTEM PROGRAMMING OPTIONS FOR THE TRANSMITTER TEST THE SYSTEM PRODUCT DESCRIPTION The Model ITIFOB01 is a four button, battery powered, water-resistant, transmitter designed for use with GE security systems. Pressing one of the buttons on the transmitter sends a digital coded wireless signal to its companion receiver and lights the red signal indicator on the transmitter. The transmitter sends variations of the code depending on which button is pressed. The code format features over 4 billion different encrypted code sequences. To ensure sending a signal, press the transmitter button for a minimum of 2 seconds. Each transmitter is powered by two self-contained type CR2025 3-volt lithium batteries (included). Every activation, the transmitter sends its battery status to the receiver. If the battery is low, a low battery signal is sent to the receiver. Receivers must be programmed to the transmitters code before system testing and operation. Refer to the receivers instructions for details on operation and programming. The transmitter is supplied with an optional mounting bracket and a belt clip. For stationary applications, the transmitter snaps into the mounting bracket. For portable use, the belt clip attaches to mounting bracket allowing the unit to be clipped to shirt pocket or slid onto a belt. BATTERY REPLACEMENT 1 TWIST COIN IN SLOT TO OPEN TRANSMITTER 2 CAREFULLY REMOVE RETAINING SCREW AND LIFT OUT BOARD BE CAREFUL NOT TO DROP SCREW ON BOARD 3 REPLACE BATTERIES WITH TWO TYPE CR2025 LITHIUM BATTERIES PLUS SIDE DOWN NOTICE TO USERS IN CALIFORNIA - CR COIN CELL LITHIUM BATTERY INFORMATION: THIS PRODUCT CONTAINS A CR COIN CELL LITHIUM BATTERY WHICH CONTAINS PERCHLORATE MATERIAL - SPECIAL HANDLING MAY APPLY -
SEE WWW.DTSC.CA.GOV/HAZARDOUSWASTE/PERCHLORATE CR2025 CR2025 SIDE SIDE 4 REVERSE STEPS TO REASSEMBLE TRANSMITTER KEEP AWAY FROM SMALL CHILDREN. IF BATTERIES ARE SWALLOWED, PROMPTLY SEE A DOCTOR. DO NOT TRY TO RECHARGE THESE BATTERIES. DISPOSAL OF USED BATTERIES MUST BE MADE IN ACCORDANCE WITH THE WASTE RECOVERY AND RECYCLING REGULATIONS IN YOUR AREA. FEATURES MOUNTING BRACKET BELT CLIP KEY FOB TRANSMITTER ACTIVATION BUTTONS LINEAR LIMITED WARRANTY This Linear product is warranted against defects in material and workmanship for twelve (12) months. This warranty extends only to wholesale customers who buy direct from Linear or through Linears normal distribution channels. Linear does not warrant this product to consumers. Consumers should inquire from their selling dealer as to the nature of the dealers warranty, if any. There are no obligations or liabilities on the part of Linear LLC for consequential damages arising out of or in connection with use or performance of this product or other indirect damages with respect to loss of property, revenue, or pro t, or cost of removal, installation, or reinstallation. All implied warranties, including implied warranties for tness, are valid only until the warranty expires. This Linear LLC Warranty is in lieu of all other warranties express or implied. All products returned for warranty service require a Return Product Authorization Number (RPA#). Contact Linear Technical Services at 1-855-546-3351 for an RPA# and other important details. Any changes or modi cations not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Les changements ou modi cations non approuvs expressment par la partie responsable de la conformit pourrait annuler lautorit de lutilisateur faire fonctionner lquipement. for merchantability and implied warranties Copyright 2013 Linear LLC Linear radio controls provide a IMPORTANT!
reliable communications link and ll an important need in portable wireless signaling. However, there are some limitations which must be observed.
For U.S. installations only: The radios are required to comply with FCC Rules and Regulations as Part 15 devices. As such, they have limited transmitter power and therefore limited range.
A receiver cannot respond to more than one transmitted signal at a time and may be blocked by radio signals that occur on or near their operating frequencies, regardless of code settings.
Changes or modi cations to the device may void FCC compliance.
Infrequently used radio links should be tested regularly to protect against undetected interference or fault.
A general knowledge of radio and its vagaries should be gained prior to acting as a wholesale distributor or dealer, and these facts should be communicated to the ultimate users. This device complies with FCC Part 15 and Canada Rules and Regulations. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. 235166 AX1