Remote Transmitter Operations Pressing and releasing the Pressing and releasing the disarm/
arm/lock button arms unlock button disarms the system the security system and unlocks the doors unless and locks the doors. the system is activated. The Pressing and holding unlock operation may be this button for three configured so that pressing seconds will first arm, this button once disarms the and then activate the system and unlocks only the Panic feature, locking driver's door, and pressing a the doors. second time unlocks all of the doors. Pressing and holding this button for three seconds will first disarm, and then activate the Panic feature, unlocking the doors. Pressing the channel 2 button for two seconds can be used to activate an output for an optional function such as trunk release. Pressing and releasing this button twice arms or disarms the system without the confirmation chirps. Pressing the panic button for threeseconds will activate the Panic feature, but without locking or unlocking the doors. Transmitter part number: #143-03 The Red LED Status Light: Informs you of the different conditions the security system can be in and also serves as a visual deterrent to break-ins and theft. The Valet Switch: In every day operation, the Valet Switch is used toplace the system into "Valet Mode. Valet Mode can be used to tum off automatic functions, such as Last Door Arming or Automatic Rearming, and also prevents arming the system via remote transmitter. The Valet Switch is also used, with the ignition key, to disarm the security system in the event the transmitter becomes inoperable, and this switch is also used in the procedure for programming features and programming transmitters. Arming The System Using The Transmitter Arming The Security System Using The Transmitter: The security systemcan always be armed from the transmitter, provided the ignition key is off and the system is notin the Valet Mode. To arm the system, after you exit the vehicle and close all of the doors, simply Press and release the arm/lock button once. The parking and interior lights will flash once, the siren will chirp once and the LED Status Light will begin to flash, confirming that the system is armed. In addition, the doors will lock and the starter interrupt will engage to Prevent any attempt to start the vehicle. Your security system is now fully armed, and is teady to respond if an intrusion attempt is detected. Please note that the Excaliburs separate arm/lock and disarm/unlock button design allows repetitive operation- if already armed, pressing the arm/lock button will simply rearm the system, and vice versa when pressing the disarm/unlock button. CAUTION: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the users authority to operate the equipment __