Okyanus Technology computer & Software inc Ali Rza Grcan Cadddesi. Alparslan Merkezi No: 27/15 Merter - Gngre, stanbul Tel: +90 (212) 481 96 22 Fax: +90 (212) 481 96 23 www.wipelot.com Real Time Location System Hardware Guide
(RTLS) SETTING UP DEVICES & RF NETWORK Rest of the manual guides you through the steps necessary for setting up and configuring your Wipelot devices. Please read this manual before system setup. 1.1. Safety The device must be used solely with its original power adaptor. Please note that the adapter is 110/220V AC 1.2. Introduction Wipelot devices are based on 2.4GHZ IEEE 802.15.4 compliant RF wireless network. To form a minimal 802.15.4 RF Network, you should have at least 1-Router, 1-Reader and Mobile Devices. Main coordinator (router) establishes a mesh network once it is installed. Each plugged reader
(receiver), attends this network automatically and relays data for the network. All reader nodes cooperate in the distribution of data in the network. Wipelots small sized newborn baby tag is affixed to the ankle of the newborn infant to be tracked. The tag contains an RF transmitter circuit. It transmits message signal, comprising unique identity information, to receivers which are strategically placed within the hospital. The message is propagated along a path by hopping from node to node until it reaches the port wihch is being listened by the Location Provider Service software. Location Provider Software calculates tags positions by using RSSI (received signal strength indicator) levels, dimensions of the region to be tracked and fixed position information of the receivers on that region. Component Interoperability Calculated positions are being written on the Location Provider System database. These positions can also be used in real time by remoting technology. This architecture provides flexiblity in integration with third party softwares. Wipelot H-RTLS application comprises an independent service 1. which listens the Location Provider System database. It interpretes fetched information and applies some business rules on it prior to UI interaction. Tags comprise a conductive security element attachment having two ends, whose electrical state will change when stretched, severed, or removed by parting the end. When the electrical state changes an alarm code will be generated and sent to receivers. This information will then be processed as explained above. Built in motion sensor is able to detect unnatural movements like falling, being idle for a certain period of time etc. Alarm will be generated as soon as this kind of movement is detected. 1.3. RF affecting factors All devices's RF signals can affect some material some extent. If our devices's RF signal encounter some material especially high-level obstacle severity material as stated in Table 1. Router, Reader and Tags will be decreased range of distance. For this reason, all device have to position as far as possible from especially obstruction of high level obstacle severity material as in Table 1. Obstruction Wood / Wood paneling Drywall Furniture Clear glass Tinted glass People Obstacle Severity Low Low Low Low Medium Medium Sample Use nside a wall or hollow door nside Walls Couches or office partitions Windows Windows High-volume traffic areas that have consirable pedestrian traffic Ceramic tile Medium Walls Concrete blocks Medium/High Outer wall construction Mirrors Metals Water High High High Mirror or reflective glass Metal office partitions, doors, metal office furniture Aquariums, rain, fauntains Table-1 RF Obstacles Found Indoors 1.1. Device Definitions 1.1.1. Active RFID Reader (Wipelot Model No: FT-05DCH) Router is hierarchically the top-most Node of 802.15.4 RF Network. It forms/manages RF Network, collects all RF Network data and behaves as a gateway from RF Network to upper media. Reader device has red led and green led on itself. If green led blinks, it means that the router device tries to form Rf network. If green led lighten constantly, it means that the router device forms Rf Network succesfully. If red led blinks, it means that the router device take places data communication Power: Wipelot FT-05DCH feeds 100-240V AC 50/60Hz and supports working with a battery which has 2900 mAh lithium battery Wipelot FT-05DCH device has RF propagation (jn5168 chip) that 20 dBm output power level and it has 2,4 GHz uFl tranmitter antenna which is has 2dBi gain. Also, FT-05DCH device has UWB module (DWM1000 module) that has 3.1 ~ 8 GHz monopole antenna. We operate at 4.4GHz due to special reason. UWB Module output power is fully adjustable from 0 dBm to 15.5 dBm via firmware. The device's antenna type is omnidirectional. Therefore, the Wipelot FT-05DCH can take signal every direction. If Wipelot FT-05DCH obstructs by obstacle of in Table 1. The devices RF signal will decrease as stated in Table 1. THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS.
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Model No Power Buzzer RF Antenna Flasher Mac Address UWB Antenna leds On- Off Buttons Figure 2: Wipelot FT-05DCH Hardware Structure