FCC ID: 2AEEV-OBFTC0044A Power Bank

2 FULLY CHARGE FOR FIRST USE While charging display continually shows (Fig. 1):

1 ashing LED < 25% capacity 1 solid LED, 1 ashing LED 25-50% capacity 2 solid LEDs, 1 ashing LED 50-75% capacity 3 solid LEDs, 1 ashing LED 75-99% capacity 4 solid LEDs 100% capacity POWER BANK QUICK START GUIDE OBFTC-0044-A FIG. 1 WIRELESSLY CHARGE DEVICES

(IF APPLICABLE) Press button and place your device at on the side of the Power bank featuring the OtterBox logo. An orange light blinks while detecting your device and stops blinking if the device is not detected. The orange light blinks when a device is connected and charging. CARE & MAINTENANCE Cleaning 1. Wipe with a dry cloth. 2. Do not use solvents, chemicals, cleaning solutions, alcohol, ammonia or abrasives. 4 CUSTOMER SERVICE 1-855-688-7269 USA + Canada - Toll Free support@otterbox.com otterbox.com/support When not charging, press button to view capacity

(Fig. 2):

COMPLETE USER MANUAL MODE DEMPLOI COMPLET No LEDs 0% capacity 1 ashing LED 0-10% capacity 1 solid LED 10-25% capacity 2 solid LEDs 25-50% capacity 3 solid LEDs 50-75% capacity 4 solid LEDs 75-100% capacity OTTERBOX.COM/SAFETY-INSTRUCTIONS DE Gesamtes Benutzerhandbuch IT Manuale Utente Completo ES Manual de Usuario Completo PT Manual do Utilizador Completo JA KO ZHT ZH This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FIG. 2 CHARGE DEVICES Power bank automatically starts charging most devices. 20-55265_A 6 CHARGEUR PORTATIF GUIDE DE DMARRAGE RAPIDE changes or modications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. ISED compliance statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

SERVICE LA CLIENTLE 1-855-688-7269

.-U. + Canada - Gratuit support@otterbox.com otterbox.com/support Cet appareil est conforme la section 15 des rglementations de la FCC. Son fonctionnement est soumis aux deux conditions suivantes :

(1) cet appareil ne doit pas causer dinterfrences nuisibles ; (2) cet appareil doit accepter toute interfrence reue, notamment les interfrences susceptibles doccasionner un fonctionnement indsirable. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help.

(1) Lappareil ne doit pas produire de brouillage;

(2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Radiation Exposure statement This equipment complies with FCC/IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. Cet quipement est conforme aux limites d'exposition aux radiations FCC/IC CNR-102 tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec une distance minimale de 20 cm entre le radiateur et votre corps. Project Name: INSERT CARD POWER BANK QUICK START GUIDE Designer: Rowell Part #: 20-55265 Rev: A Date: 4.28.2020 Dieline and material shall follow: 23-84697 Colors Coatings and Treatments:

Notes:

Process Black PMS 109 Accordian Fold t S e p 1 POWER BANK t S e p 2 i F n a l POWER BANK NOT FOR PRINT -

FOR REFERENCE ONLY Dielines-

do not print Folds-

do not print Confidential property of Otter Products LLC Reproduction and unauthorized use is prohibited Otterproducts LLC:

209 South Meldrum Street, Fort Collins,CO 80521

Applicant Legal Business Name Otter Products, LLC. Grantee Code FCC ID Authorized Contact Name Contact Email Contact Phone SGS North America Inc. i i peng nt ianeclane ah Applicant Declaration SUITE 100 Suwanee, Georgia 30024 United States 209 South Meldrum,Fort Collins, Colorado, 80521 United States 2AEEV-OBFTC0044A Steve Dressor steve.dressor@otterproducts.com

(970) 980-2092 I, the undersigned, certify that | am an authorized signatory for the Applicant and therefore declare;

a) b) 9) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:

(1) labeling the equipment with the exact FCC ID as specified in this application,

(2) compliance statement labeling pursuant to the applicable rules,

(3) compliance of the equipment with the applicable technical rules, if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCCs technical requirements. in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. in accordance with 1S017065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.

(1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing.

(2) the Applicant sha// make provisions to always have a production sample available upon request by SGS, FCC and/or ISED.

(3) the Applicant shal/, upon request by SGS, at the Applicant's expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a party for these purposes. the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https:/Awww.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature:

*NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database Applicant Declaration Rev:0.0

Otter Products, LLC. TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: Confidentiality Request regarding application for FCC ID: 2AEEV-OBFTCO044A LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 45 days from the grant date, whichever is less. If the device is marketed within 45 days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 DO1 Confidentiality Request Procedures. External Photos Internal Photos Test Setup Photos User manual(s) Sincerely, BrIREINSIRE! Steve Dressor Title: Regulatory Engineering Manager comme 19 Pomoe On behalf of Company: Otter Products, LLC. Telephone: (970) 980-2092 E-mail: steve.dressor@otterproducts.com

Otter Products, LLC. Date: 2020-06-03 TO; Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCCID: 2AEEV-OBFTCOO4#A To whom it may concern:

We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch and Keny Xu in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, | acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Otter Products, LLC. This authorization is valid until further written notice from the applicant. On behalf of Company: Otter Products, LLC. Telephone: (970) 980-2092 E-mail: steve.dressor@otterproducts.com

Otter Products, LLC. Cover Letter-Wireless Charger Approval Date: 2020-06-03 Gentlemen:

Theres a Power Bank, that would like to have your authorization as an Inductive wireless power transfer applications approval. - :

The specific product as below, Power Bank with its designed features and specified description, meets special requirements for KDB 680106 DO1 section 5.2 requirements. Otter Products, LLC. Power Bank OBFTC-0044-A 2AEEV-OBFTCO044A KDB 680106 DO1 Section 5.2 Requirements a) Power transfer frequency is less that 1 MHz Product Technical Specification 126.44-129.01kHz Complied Complied Complied Complied Complied Complied b) Output power from each primary coil is less than or equal to 15 watts.

c) The transfer system includes only single primary and secondary coils. This includes charging systems that may have multiple primary coils and clients that are able to detect and allow coupling only between individual pairs of coils d) Client device is placed directly in contact with the transmitter. e) Mobile exposure conditions only For inductive applications where the primary does not physically attach to the client, and it is intended for desktop use, the desktop guidance in KDB 680106 DO1 may be applied Please refer to RF exposure report f) The aggregate H-field strengths at 15 cm surrounding the device and 20 cm above the top surface from all simultaneous transmitting coils are demonstrated to be less than 50% of the MPE limit. Sincerely, seach Syne On behalf of Company: Otter Products, LLC. Telephone: (970) 980-2092 E-mail: steve.dressor@otterproducts.com