FCC RF Test Report Report No. : FR941109D FCC RF Test Report APPLICANT
: PAX Technology Limited EQUIPMENT
: Smart Tablet BRAND NAME
: PAX MODEL NAME
: Aries6 FCC ID
: V5PAR6 STANDARD
: FCC Part 15 Subpart C 15.225 CLASSIFICATION : (DXX) Low Power Communication Device Transmitter The product was received on Apr. 11, 2019 and testing was completed on Jun. 23, 2019. We, Sporton International (Shenzhen) Inc., would like to declare that the tested sample has been evaluated in accordance with the test procedures and has been in compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of Sporton International (Shenzhen) Inc., the test report shall not be reproduced except in full. Reviewed by: Derreck Chen / Supervisor Approved by: Eric Shih / Manager Sporton International (ShenZhen) Inc. 1/F, 2/F, Bldg 5, Shiling Industrial Zone, Xinwei Village, Xili, Nanshan, Shenzhen, 518055 Peoples Republic of China Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PAR6 Page Number
: 1 of 22 Report Issued Date : Aug. 02, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FR15CNFC Version 2.0 FCC RF Test Report Report No. : FR941109D TABLE OF CONTENTS TABLE OF CONTENTS ............................................................................................................................................... 2 REVISION HISTORY .................................................................................................................................................... 3 SUMMARY OF THE TEST RESULT ........................................................................................................................... 4 1. GENERAL DESCRIPTION ...................................................................................................................................... 5 1.1 Applicant ......................................................................................................................................................................... 5 1.2 Manufacturer .................................................................................................................................................................. 5 1.3 Product Feature of Equipment Under Test ..................................................................................................................... 5 1.4 Product Specification of Equipment Under Test ............................................................................................................. 6 1.5 Modification of EUT ........................................................................................................................................................ 6 1.6 Testing Location ............................................................................................................................................................. 7 1.7 Applicable Standards...................................................................................................................................................... 7 2. TEST CONFIGURATION OF EQUIPMENT UNDER TEST .................................................................................... 8 2.1 Descriptions of Test Mode .............................................................................................................................................. 8 2.2 Connection Diagram of Test System .............................................................................................................................. 9 2.3 Table for Supporting Units ............................................................................................................................................ 10 2.4 EUT Operation Test Setup ........................................................................................................................................... 10 3. TEST RESULTS ..................................................................................................................................................... 11 3.1 AC Power Line Conducted Emissions Measurement ................................................................................................... 11 3.2 20dB and 99% OBW Spectrum Bandwidth Measurement ............................................................................................ 13 3.3 Frequency Stability Measurement ................................................................................................................................ 14 3.4 Field Strength of Fundamental Emissions and Mask Measurement ............................................................................. 15 3.5 Radiated Emissions Measurement ............................................................................................................................... 17 3.6 Antenna Requirements ................................................................................................................................................. 20 4. LIST OF MEASURING EQUIPMENT .................................................................................................................... 21 5. UNCERTAINTY OF EVALUATION ....................................................................................................................... 22 APPENDIX A. TEST RESULTS OF CONDUCTED EMISSION TEST APPENDIX B. TEST RESULTS OF CONDUCTED TEST ITEMS B1. Test Result of 20dB Spectrum Bandwidth B2. Test Result of Frequency Stability APPENDIX C. TEST RESULTS OF RADIATED TEST ITEMS C1. Test Result of Field Strength of Fundamental Emissions C2. Results of Radiated Emissions (9 kHz~30MHz) C3. Results of Radiated Emissions (30MHz~1GHz) APPEDNIX D. SETUP PHOTOGRAPHS Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PAR6 Page Number
: 2 of 22 Report Issued Date : Aug. 02, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FR15CNFC Version 2.0 FCC RF Test Report Report No. : FR941109D REVISION HISTORY REPORT NO. VERSION DESCRIPTION ISSUED DATE FR941109D Rev. 01 Initial issue of report Aug. 02, 2019 Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PAR6 Page Number
: 3 of 22 Report Issued Date : Aug. 02, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FR15CNFC Version 2.0 FCC RF Test Report Report No. : FR941109D SUMMARY OF THE TEST RESULT Report Section FCC Rule Description of Test Result Remark 3.1 15.207 AC Power Line Conducted Emissions Under limit Complies 3.15 dB at 13.560MHz 15.215(c) 20dB Spectrum Bandwidth Complies 3.2
-
99% OBW Spectrum Bandwidth Complies 3.3 15.225(e) Frequency Stability Complies
-
-
-
3.4 15.225(a)(b)(c) Field Strength of Fundamental Emissions Max level Complies 82.37 dBV/m at 13.560 MHz Under limit 3.01 dB at 30.000MHz for Quasi-Peak 3.5 15.225(d) & 15.209 Radiated Spurious Emissions Complies 3.6 15.203 Antenna Requirements Complies
-
Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PAR6 Page Number
: 4 of 22 Report Issued Date : Aug. 02, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FR15CNFC Version 2.0 FCC RF Test Report 1. General Description 1.1 Applicant PAX Technology Limited Report No. : FR941109D Room 2416, 24/F., Sun Hung Kai Centre, 30 Harbour Road, Wanchai, Hong Kong 1.2 Manufacturer PAX Computer Technology (Shenzhen) Co., Ltd. 4/F, No.3 Building, Software Park, Second Central Science-Tech Road, High-Tech industrial Park, Shenzhen, Guangdong, P.R.C. 1.3 Product Feature of Equipment Under Test Equipment Brand Name Model Name FCC ID EUT supports Radios application IMEI Code HW Version SW Version EUT Stage Product Feature Smart Tablet PAX Aries6 V5PAR6 WCDMA/HSPA/DC-HSDPA/HSPA+(16QAM uplink is not supported)/LTE/GPS/NFC WLAN 2.4GHz 802.11b/g/n HT20 WLAN 5GHz 802.11a/n HT20/HT40 WLAN 5GHz 802.11ac VHT20/VHT40/VHT80 Bluetooth BR/EDR/LE Conducted: 866732039393476 Conduction: 866732039389946 Radiation: 866732039389581 N/A N/A Production Unit Remark: The above EUT's information was declared by manufacturer. Please refer to the specifications or user's manual for more detailed description. Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PAR6 Page Number
: 5 of 22 Report Issued Date : Aug. 02, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FR15CNFC Version 2.0 FCC RF Test Report Report No. : FR941109D 1.4 Product Specification of Equipment Under Test Tx/Rx Frequency Range 13.553 ~ 13.567MHz Standards-related Product Specification Channel Number 20dBW 99%OBW Antenna Type Type of Modulation 1 2.458 kHz 2.078 kHz PCB Antenna ASK Remark: The above EUT's information was declared by manufacturer. Please refer to the specifications or user's manual for more detailed description. 1.5 Modification of EUT No modifications are made to the EUT during all test items. Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PAR6 Page Number
: 6 of 22 Report Issued Date : Aug. 02, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FR15CNFC Version 2.0 FCC RF Test Report 1.6 Testing Location Report No. : FR941109D Sporton International (Shenzhen) Inc. is accredited to ISO/IEC 17025:2017 by American Association for Laboratory Accreditation with Certificate Number 5145.01. Test Site Sporton International (Shenzhen) Inc. Test Site Location 1/F, 2/F, Bldg 5, Shiling Industrial Zone, Xinwei Village, Xili, Nanshan, Shenzhen, 518055 Peoples Republic of China TEL: +86-755-86379589 FAX: +86-755-86379595 Test Site No. Test Engineer Temperature Relative Humidity Sporton Site No. FCC Designation FCC Test Firm No. Registration No. TH01-SZ Zhang Jiang 24~26 50~53 CO01-SZ Bear Xiong 22~25 50~55 CN1256 421272 Test Site Sporton International (Shenzhen) Inc. Test Site Location No. 3 Bldg the third floor of south, Shahe River west, Fengzeyuan Warehouse, Nanshan Shenzhen, 518055 Peoples Republic of China TEL: +86-755-33202398 Test Site No. Test Engineer Temperature Relative Humidity Sporton Site No. FCC Designation FCC Test Firm No. Registration No. 03CH03-SZ Zhongmin Zhang 23~25 48~52 CN1256 421272 1.7 Applicable Standards According to the specifications of the manufacturer, the EUT must comply with the requirements of the following standards:
47 CFR Part 15 Subpart C 15.225 ANSI C63.10-2013 Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PAR6 Page Number
: 7 of 22 Report Issued Date : Aug. 02, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FR15CNFC Version 2.0 FCC RF Test Report Report No. : FR941109D 2. Test Configuration of Equipment Under Test 2.1 Descriptions of Test Mode Investigation has been done on all the possible configurations. The following table is a list of the test modes shown in this test report. Test Items AC Power Line Conducted Emissions Field Strength of Fundamental Emissions 20dB Spectrum Bandwidth Frequency Stability Radiated Emissions 9kHz~30MHz Radiated Emissions 30MHz~1GHz The EUT pre-scanned in four NFC type, A, B. The worst type (type A) was recorded in this report. Pre-scanned tests, X, Y, Z in three orthogonal panels to determine the final configuration (Y plane as worst plane) from all possible combinations. Test Cases AC Conducted Emission Mode 1 : LTE Band5 Idle + Bluetooth Link + WLAN Link (2.4G) + NFC Tx + USB Cable(Charging from Adapter) + Earphone Remark: For Radiated Test Cases, The tests were performed with Adapter, Earphone and USB Cable Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PAR6 Page Number
: 8 of 22 Report Issued Date : Aug. 02, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FR15CNFC Version 2.0 FCC RF Test Report 2.2 Connection Diagram of Test System For Radiation Report No. : FR941109D Power Source EUT+NFC card Earphone For Conducted Emission System Bluetooth Simulator Earphone WLAN AP Notebook Power Source EUT+NFC card Earphone Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PAR6 Page Number
: 9 of 22 Report Issued Date : Aug. 02, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FR15CNFC Version 2.0 FCC RF Test Report 2.3 Table for Supporting Units Report No. : FR941109D Item Equipment Trade Name Model Name FCC ID Data Cable Power Cord 1. System Simulator Anritsu MT8820C N/A N/A Unshielded,1.8m 2. WLAN AP D-Link DIR-820L KA2IR820LA1 N/A Unshielded,1.8m 3. Notebook Lenovo E540 FCC DoC N/A AC I/P:
Unshielded,1.2m DC O/P:
Shielded, 1.8 m 4. Earphone Apple MC690ZP/A N/A Shielded, 1.0m N/A 5. Bluetooth Earphone 6. NFC Card 7. DC Supply Power Samsung EO-MG900 N/A N/A GW N/A N/A GPS-3030D N/A N/A N/A N/A N/A N/A Unshielded,1.8m 2.4 EUT Operation Test Setup The EUT was programmed to be in continuously transmitting mode. The ancillary equipment, NFC card, is used to make the EUT (NFC) continuously transmit at 13.56MHz and is placed around 3 cm gap to the EUT. Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PAR6 Page Number
: 10 of 22 Report Issued Date : Aug. 02, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FR15CNFC Version 2.0 FCC RF Test Report 3. Test Results Report No. : FR941109D 3.1 AC Power Line Conducted Emissions Measurement 3.1.1 Limit of AC Conducted Emission For equipment that is designed to be connected to the public utility (AC) power line, the radio frequency voltage that is conducted back onto the AC power line on any frequency or frequencies within the band 150 kHz to 30 MHz shall not exceed the limits in the following table. Frequency of Emission Conducted Limit (dBV)
(MHz) 0.15-0.5 0.5-5 5-30 Quasi-Peak 66 to 56*
56 60 Average 56 to 46*
46 50
*Decreases with the logarithm of the frequency. 3.1.2 Measuring Instruments See list of measuring instruments of this test report. 3.1.3 Test Procedures 1. The EUT was placed 0.4 meter from the conducting wall of the shielding room, and it was kept at least 80 centimeters from any other grounded conducting surface. 2. Connect EUT to the power mains through a line impedance stabilization network (LISN). 3. All the support units are connecting to the other LISN. 4. The LISN provides 50 ohm coupling impedance for the measuring instrument. 5. The FCC states that a 50 ohm, 50 microhenry LISN should be used. 6. Both sides of AC line were checked for maximum conducted interference. 7. The frequency range from 150 kHz to 30 MHz was searched. 8. Set the test-receiver system to Peak Detect Function and specified bandwidth (IF Bandwidth =
9kHz) with Maximum Hold Mode. Then measurement is also conducted by Average Detector and Quasi-Peak Detector Function respectively. Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PAR6 Page Number
: 11 of 22 Report Issued Date : Aug. 02, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FR15CNFC Version 2.0 FCC RF Test Report 3.1.4 Test setup Report No. : FR941109D 3.1.5 Test Result of AC Conducted Emission Please refer to Appendix A. Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PAR6 Page Number
: 12 of 22 Report Issued Date : Aug. 02, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FR15CNFC Version 2.0 FCC RF Test Report Report No. : FR941109D 3.2 20dB and 99% OBW Spectrum Bandwidth Measurement 3.2.1 Limit Intentional radiators must be designed to ensure that the 20dB and 99% emission bandwidth in the specific band 13.553~13.567MHz. 3.2.2 Measuring Instruments See list of measuring instruments of this test report. 3.2.3 Test Procedures 1. The spectrum analyzer connected via a receive antenna placed near the EUT in peak Max hold mode. 2. The resolution bandwidth of 1 kHz and the video bandwidth of 3 kHz were used. 3. Measured the spectrum width with power higher than 20dB below carrier. 4. Measured the 99% OBW. 3.2.4 Test Setup 3.2.5 Test Result of Conducted Test Items Please refer to Appendix B. Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PAR6 Page Number
: 13 of 22 Report Issued Date : Aug. 02, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FR15CNFC Version 2.0 FCC RF Test Report 3.3 Frequency Stability Measurement 3.3.1 Limit Report No. : FR941109D The frequency tolerance of the carrier signal shall be maintained within +/- 0.01% (100ppm) of the operating frequency over a temperature variation of -20 degrees to +50 degrees C at normal supply voltage, and for a variation in the primary supply voltage from 85% to 115% of the rated supply voltage at a temperature of 20 degrees C. For battery operated equipment, the equipment tests shall be performed using a new battery. 3.3.2 Measuring Instruments See list of measuring instruments of this test report. 3.3.3 Test Procedures 1. The spectrum analyzer connected via a receive antenna placed near the EUT. 2. EUT have transmitted signal and fixed channelize. 3. Set the spectrum analyzer span to view the entire emissions bandwidth. 4. Set RBW = 1 kHz, VBW = 3 kHz with peak detector and maxhold settings. 5. The fc is declaring of channel frequency. Then the frequency error formula is (fc-f)/fc 106 ppm and the limit is less than 100ppm. 6. Extreme temperature rule is -20C~50C. 3.3.4 Test Setup 3.3.5 Test Result of Conducted Test Items Please refer to Appendix B. Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PAR6 Page Number
: 14 of 22 Report Issued Date : Aug. 02, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FR15CNFC Version 2.0 FCC RF Test Report Report No. : FR941109D 3.4 Field Strength of Fundamental Emissions and Mask Measurement 3.4.1 Limit Rules and specifications FCC CFR 47 Part 15 section 15.225 Description Compliance with the spectrum mask is tested with RBW set to 9kHz. Freq. of Emission (MHz) Field Strength Field Strength Field Strength Field Strength
(V/m) at 30m
(dBV/m) at 30m
(dBV/m) at 10m
(dBV/m) at 3m 1.705~13.110 13.110~13.410 13.410~13.553 30 106 334 13.553~13.567 15848 13.567~13.710 13.710~14.010 14.010~30.000 334 106 30 29.5 40.5 50.5 84.0 50.5 40.5 29.5 48.58 59.58 69.58 103.08 69.58 59.58 48.58 69.5 80.5 90.5 124.0 90.5 80.5 69.5 3.4.2 Measuring Instruments See list of measuring instruments of this test report. Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PAR6 Page Number
: 15 of 22 Report Issued Date : Aug. 02, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FR15CNFC Version 2.0 FCC RF Test Report 3.4.3 Test Procedures Report No. : FR941109D 1. Configure the EUT according to ANSI C63.10. The EUT was placed on the top of the turntable 0.8 meter above ground. The phase center of the loop receiving antenna mounted antenna tower was placed 3 meters far away from the turntable. 2. Power on the EUT and all the supporting units. The turntable was rotated by 360 degrees to determine the position of the highest radiation. 3. The height of the receiving antenna was fixed at one meter above ground to find the maximum emissions field strength. 4. For Fundamental emissions, use the receiver to measure QP reading. 5. When the radiated emissions limits are expressed in terms of the average value of the emissions, and pulsed operation is employed, the measurement field strength shall be determined by averaging over one complete pulse train, including blanking intervals, as long as the pulse train does not exceed 0.1 seconds. As an alternative (provided the transmitter operates for longer than 0.1 seconds) or in cases where the pulse train exceeds 0.1 seconds, the measured field strength shall be determined from the average absolute voltage during a 0.1 second interval during which the field strength is at its maximum value. 6. Compliance with the spectrum mask is tested with RBW set to 9kHz. Note: Emission level (dBV/m) = 20 log Emission level (V/m). 3.4.4 Test Setup For radiated emissions below 30MHz 3.4.5 Test Result of Field Strength of Fundamental Emissions and Mask Please refer to Appendix C. Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PAR6 Page Number
: 16 of 22 Report Issued Date : Aug. 02, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FR15CNFC Version 2.0 FCC RF Test Report 3.5 Radiated Emissions Measurement 3.5.1 Limit Report No. : FR941109D The field strength of any emissions which appear outside of 13.110 ~14.010MHz band shall not exceed the general radiated emissions limits. Frequencies
(MHz) 0.009~0.490 0.490~1.705 1.705~30.0 30~88 88~216 216~960 Above 960 Field Strength Measurement Distance
(V/m) 2400/F(kHz) 24000/F(kHz) 30 100 150 200 500
(meters) 300 30 30 3 3 3 3 3.5.2 Measuring Instruments See list of measuring instruments of this test report. 3.5.3 Measuring Instrument Setting The following table is the setting of receiver. Receiver Parameter Attenuation Setting Auto Frequency Range: 9kHz~150kHz RBW 200Hz for QP Frequency Range: 150kHz~30MHz RBW 9kHz for QP Frequency Range: 30MHz~1000MHz RBW 120kHz for Peak Note: The emission limits shown in the above table are based on measurements employing a CISPR quasi-peak detector except for the frequency bands 9-90 kHz, 110-490 kHz. Radiated emission limits in these two bands are based on measurements employing an average detector. Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PAR6 Page Number
: 17 of 22 Report Issued Date : Aug. 02, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FR15CNFC Version 2.0 FCC RF Test Report 3.5.4 Test Procedures Report No. : FR941109D 1. Configure the EUT according to ANSI C63.10. The EUT was placed on the top of the turntable 0.8 meter above ground. The phase center of the receiving antenna mounted on the top of a height-variable antenna tower was placed 3 meters far away from the turntable. 2. Power on the EUT and all the supporting units. The turntable was rotated by 360 degrees to determine the position of the highest radiation. 3. The height of the broadband receiving antenna was varied between one meter and four meters above ground to find the maximum emissions field strength of both horizontal and vertical polarization. 4. For each suspected emissions, the antenna tower was scan (from 1 M to 4 M) and then the turntable was rotated (from 0 degree to 360 degrees) to find the maximum reading. 5. Set the test-receiver system to Peak or CISPR quasi-peak Detect Function with specified bandwidth under Maximum Hold Mode. 6. When the radiated emissions limits are expressed in terms of the average value of the emissions, and pulsed operation is employed, the measurement field strength shall be determined by averaging over one complete pulse train, including blanking intervals, as long as the pulse train does not exceed 0.1 seconds. As an alternative (provided the transmitter operates for longer than 0.1 seconds) or in cases where the pulse train exceeds 0.1 seconds, the measured field strength shall be determined from the average absolute voltage during a 0.1 second interval during which the field strength is at its maximum value. 7. In case the emission is lower than 30MHz, loop antenna has to be used for measurement and the recorded data should be QP measured by receiver. Antenna Requirements Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PAR6 Page Number
: 18 of 22 Report Issued Date : Aug. 02, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FR15CNFC Version 2.0 FCC RF Test Report 3.5.5 Test Setup For radiated emissions below 30MHz Report No. : FR941109D For radiated emissions above 30MHz 3.5.6 Test Result of Radiated Emissions Measurement Please refer to Appendix C. Remark: There is a comparison data of both open-field test site and semi-Anechoic chamber, and the result came out very similar. Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PAR6 Page Number
: 19 of 22 Report Issued Date : Aug. 02, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FR15CNFC Version 2.0 FCC RF Test Report 3.6 Antenna Requirements 3.6.1 Standard Applicable Report No. : FR941109D Except for special regulations, the Low-power Radio-frequency Devices must not be equipped with any jacket for installing an antenna with extension cable. An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator shall be considered sufficient to comply with the provisions of this Section. The manufacturer may design the unit so that the user can replace a broken antenna, but the use of a standard antenna jack or electrical connector is prohibited. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator shall be considered sufficient to comply with the rule. 3.6.2 Antenna Anti-Replacement Construction An embedded-in antenna design is used. Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PAR6 Page Number
: 20 of 22 Report Issued Date : Aug. 02, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FR15CNFC Version 2.0 FCC RF Test Report 4. List of Measuring Equipment Report No. : FR941109D Instrument Manufacturer Model No. Serial No. Characteristics Calibration Date Test Date Due Date Remark Spectrum Analyzer Pulse Power Senor R&S FSV40 101078 10Hz~40GHz Apr. 18, 2019 Jun. 23, 2019 Apr. 17, 2020 Anritsu MA2411B 1207253 30MHz~40GHz Dec. 22, 2018 Jun. 23, 2019 Dec. 21, 2019 Power Meter Anritsu ML2495A 1218010 EMI Test Receiver&SA EXA Spectrum Anaiyzer KEYSIGHT N9038A KEYSIGHT N9010A MY544500 83 MY551502 46 50MHz Bandwidth Dec. 22, 2018 Jun. 23, 2019 Dec. 21, 2019 20Hz~8.4GHz Apr. 18, 2019 Jun. 13, 2019 Apr. 17, 2020 10Hz~44GHz; Apr. 18, 2019 Jun. 13, 2019 Apr. 17, 2020 Loop Antenna R&S HFH2-Z2 100354 9kHz~30MHz May 29, 2019 Jun. 13, 2019 May 28, 2020 Bilog Antenna TeseQ CBL6112D 35408 30MHz-2GHz Apr. 19, 2019 Jun. 13, 2019 Apr. 18, 2020 Amplifier Burgeon BPA-530 102210 AC Power Source Chroma 61601 616010001 985 0.01Hz
~3000MHz Oct. 18, 2018 Jun. 13, 2019 Oct. 17, 2019 N/A NCR Jun. 13, 2019 NCR Turn Table Antenna Mast EM EM EM1000 N/A 0~360 degree NCR Jun. 13, 2019 NCR EM1000 N/A 1 m~4 m NCR Jun. 13, 2019 NCR EMI Receiver R&S ESR7 101630 9kHz~7GHz; Dec. 23, 2018 Jun. 03, 2019 Dec. 22, 2019 AC LISN EMCO 3816/2SH 00103912 9kHz~30MHz Oct. 18, 2018 Jun. 03, 2019 Oct. 17, 2019 AC LISN
(for auxiliary EMCO 3816/2SH 00103892 9kHz~30MHz Dec. 23, 2018 Jun. 03, 2019 Dec. 22, 2019 equipment) AC Power Source Chroma 61602 616020000 891 NCR: No Calibration Required 100Vac~250Vac Jul. 18, 2018 Jun. 03, 2019 Jul. 17, 2019 Conducted
(TH01-SZ) Conducted
(TH01-SZ) Conducted
(TH01-SZ) Radiation
(03CH03-SZ) Radiation
(03CH03-SZ Radiation
(03CH03-SZ) Radiation
(03CH03-SZ) Radiation
(03CH03-SZ) Radiation
(03CH03-SZ) Radiation
(03CH03-SZ) Radiation
(03CH03-SZ) Conduction
(CO01-SZ) Conduction
(CO01-SZ) Conduction
(CO01-SZ) Conduction
(CO01-SZ) Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PAR6 Page Number
: 21 of 22 Report Issued Date : Aug. 02, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FR15CNFC Version 2.0 FCC RF Test Report 5. Uncertainty of Evaluation Report No. : FR941109D The measurement uncertainties shown below were calculated in accordance with the requirements of ANSI 63.10-2013. All the measurement uncertainty value were shown with a coverage K=2 to indicate 95% level of confidence. The measurement data show herein meets or exceeds the CISPR measurement uncertainty values specified in CISPR 16-4-2 and can be compared directly to specified limit to determine compliance. Uncertainty of Conducted Emission Measurement (150 kHz ~ 30 MHz) Measuring Uncertainty for a Level of Confidence of 95% (U = 2Uc(y)) Uncertainty of Radiated Emission Measurement (9 kHz ~ 30 MHz) Measuring Uncertainty for a Level of Confidence of 95% (U = 2Uc(y)) Uncertainty of Radiated Emission Measurement (30 MHz ~ 1000 MHz) Measuring Uncertainty for a Level of Confidence of 95% (U = 2Uc(y)) 2.6 dB 5.0 dB 5.0 dB Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PAR6 Page Number
: 22 of 22 Report Issued Date : Aug. 02, 2019 Report Version
: Rev. 01 Report Template No.: BU5-FR15CNFC Version 2.0 FCC RF Test Report Report No. : FR941109D Appendix A. Test Results of Conducted Emission Test Test Engineer : Bear Xiong Temperature :
22~25 Relative Humidity : 50~55%
Test Voltage :
120Vac / 60Hz Phase :
Line Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PAR6 Page Number
: A1 of A2 Report Issued Date : Jul. 13, 2019 Report Version
: Rev. 01 FCC RF Test Report Test Engineer : Bear Xiong Test Voltage :
120Vac / 60Hz Report No. : FR941109D Temperature :
22~25 Relative Humidity : 50~55%
Phase :
Neutral Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PAR6 Page Number
: A2 of A2 Report Issued Date : Jul. 13, 2019 Report Version
: Rev. 01 FCC RF Test Report Report No. : FR941109D Appendix B. Test Results of Conducted Test Items B1. Test Result of 20dB Spectrum Bandwidth Test mode NFC Tx Test Frequency (MHz) 13.56 20dB Bandwidth (kHz) 2.458 99% Occupied BW(kHz) 2.078 Frequency range (MHz) fL13.553 fH13.567 13.55885 13.56131 Test Result Complies Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PAR6 Page Number
: B1 of B2 Report Issued Date : Jul. 13, 2019 Report Version
: Rev. 01 FCC RF Test Report B2. Test Result of Frequency Stability Report No. : FR941109D B3. Voltage vs. Frequency Stability Temperature vs. Frequency Stability Voltage (Vdc) Measurement Frequency (MHz) Temperature () Measurement Frequency (MHz) 3.55 3.70 4.20
-
-
-
-
-
13.560075 13.560075 13.560075
-
-
-
-
-
-20
-10 0 10 20 30 40 50 Max.Deviation (MHz) 0.000075 Max.Deviation (MHz) Max.Deviation (ppm) 5.5310 Max.Deviation (ppm) 13.560090 13.560080 13.560110 13.560090 13.560095 13.560080 13.560090 13.560090 0.000110 8.1121 Limit FS < 100 ppm Limit FS < 100 ppm Test Result PASS Test Result PASS Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PAR6 Page Number
: B2 of B2 Report Issued Date : Jul. 13, 2019 Report Version
: Rev. 01 FCC RF Test Report Report No. : FR941109D Appendix C. Test Results of Radiated Test Items C1. Test Result of Field Strength of Fundamental Emissions Test Mode :
NFC Tx Test Frequency (MHz) 13.56 Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PAR6 Page Number
: C1 of C5 Report Issued Date : Jul. 13, 2019 Report Version
: Rev. 01 FCC RF Test Report Report No. : FR941109D C2. Results of Radiated Spurious Emissions (9 kHz~30MHz) Test Mode :
NFC Tx Polarization :
Horizontal Frequency Level Over Limit Limit Line Read Antenna Cable Level Factor Loss Ant Pos Table Remark Pos
( MHz )
( dBV/m )
( dB )
( dBV/m )
(dBV)
( dB )
( dB )
( cm )
( deg ) 0.03838 58.19
-57.73 115.92 38.33 19.80 0.06 0.07695 53.70
-56.18 109.88 34.34 19.30 0.06 0.11514 51.13
-55.25 106.38 31.46 19.59 0.08 0.14799 48.86
-55.34 104.20 29.19 19.57 0.10 0.95105 42.93
-25.11 68.04 23.38 19.44 0.11 2.150 37.92
-32.08 9.704 35.47
-34.53 22.885 37.12
-32.88 28.830 35.87
-34.13 70 70 70 70 18.22 19.51 0.19 15.58 19.51 0.38 16.85 19.71 0.56 16.34 18.87 0.66
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Average Average Average Average QP QP QP QP QP Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PAR6 Page Number
: C2 of C5 Report Issued Date : Jul. 13, 2019 Report Version
: Rev. 01 FCC RF Test Report Report No. : FR941109D Test Mode :
NFC Tx Polarization :
Vertical Frequency Level Over Limit Limit Line Read Antenna Cable Level Factor Loss Ant Pos Table Remark Pos
( MHz )
( dBV/m )
( dB )
( dBV/m )
(dBV)
( dB )
( dB )
( cm )
( deg ) 0.03838 58.06
-57.86 115.92 38.20 19.80 0.06 0.07677 53.99
-55.91 109.9 34.63 19.30 0.06 0.11517 51.8
-54.58 106.38 32.13 19.59 0.08 0.14793 49.36
-54.84 104.2 29.69 19.57 0.10 0.53295 42.91
-30.16 73.07 23.35 19.48 0.08 2.300 37.43
-32.57 10.512 34.94
-35.06 22.156 36.49
-33.51 27.895 35.92
-34.08 70 70 70 70 17.73 19.51 0.19 15.07 19.47 0.40 16.14 19.79 0.56 16.25 19.03 0.64
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Average Average Average Average QP QP QP QP QP Note:
1. The amplitude of spurious emissions which are attenuated by more than 20dB below the permissible value has no need to be reported. 2. Distance extrapolation factor = 40 log (specific distance / test distance) (dB);
3. Limit line = specific limits (dBV) + distance extrapolation factor. Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PAR6 Page Number
: C3 of C5 Report Issued Date : Jul. 13, 2019 Report Version
: Rev. 01 FCC RF Test Report Report No. : FR941109D C3. Results of Radiated Spurious Emissions (30MHz~1GHz) Test Mode :
NFC Tx Polarization :
Horizontal Frequency Level Over Limit Limit Line Read Antenna Cable Preamp Ant Table Remark Level Factor Loss Factor Pos Pos
( MHz )
( dBV/m ) ( dB ) ( dBV/m ) (dBV)
( dB )
( dB )
( dB )
( cm ) ( deg ) 30.00 28.27
-11.73 40 35.91 24.30 0.56 32.50 94.99 28.12
-15.38 43.5 43.42 15.70 1.00 32.00 194.90 28.35
-15.15 43.5 43.22 15.50 1.44 31.81 Peak Peak Peak Peak
-
-
-
-
-
-
-
-
480.08 34.83
-11.17 623.64 39.96
-6.04 960.00 38.72
-7.28 46 46 46 40.95 23.14 2.34 31.60 44.17 24.79 2.72 31.72 130 77 Peak 39.65 27.06 3.41 31.40
-
-
Peak Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PAR6 Page Number
: C4 of C5 Report Issued Date : Jul. 13, 2019 Report Version
: Rev. 01 FCC RF Test Report Report No. : FR941109D Test Mode :
NFC Tx Polarization :
Vertical Frequency Level Over Limit Limit Line Read Antenna Cable Preamp Ant Table Remark Level Factor Loss Factor Pos Pos 44.63 24.30 0.56 32.50 100 236 QP
( MHz )
( dBV/m ) ( dB ) ( dBV/m ) (dBV)
( dB )
( dB )
( dB )
( cm ) ( deg ) 30.00 36.99
-3.01 50.37 35.22
-4.78 67.83 30.72
-9.28 40 40 40 53.20 13.90 0.72 32.60 49.66 12.62 0.84 32.40 94.99 27.36
-16.14 43.5 42.66 15.70 1.00 32.00 190.05 30.04
-13.46 43.5 45.05 15.40 1.41 31.82 623.64 36.85
-9.15 46 41.06 24.79 2.72 31.72 Note:
-
-
-
-
-
-
-
-
-
-
Peak Peak Peak Peak Peak 1. The amplitude of spurious emissions which are attenuated by more than 20dB below the permissible value has no need to be reported. 2. Emission level (dBV/m) = 20 log Emission level (V/m). 3. Corrected Reading: Antenna Factor + Cable Loss + Read Level - Preamp Factor= Level. Sporton International (Shenzhen) Inc. TEL : 86-755-8637-9589 FAX : 86-755-8637-9595 FCC ID: V5PAR6 Page Number
: C5 of C5 Report Issued Date : Jul. 13, 2019 Report Version
: Rev. 01