FCC ID: VUIMD100 Module

Before using Dongle Dongle Package including

-MD100 5G dongle *1

-USB type C to C cable *1 Open/Close SIM door Install SIM Card Before use the dongle, please insert SIM card. Please find dongle to back side, open SIM door and close after SIM card installed. Follow steps to install SIM card. Plug and Play to use 5G Dongle Plug in USB cable Please get USB type c cable, one side connect to dongle. Plug in Dongle with PC or laptop. Wait 15 seconds, you can see dongle LED turn on. Port A Port B Connect Port A or Port B (USB C to C cable) to device You can use dongle now. If you see LED color in Blue, means good signal. Green means fair signal and Red means weak signal. Blink Red means error. Note: Use your 5G dongle connected only with Listed ITE equipment. Note: Under special case, user may try to connect an external PD power adapter to another dongle USB port, if end device is not able to provide enough power required by dongle. Note: To prevent any damage, dongle only accept 5V/3A or 9V/3A or 12V/3A power sources via USB type-C connector. If need further assistance please contact local agency for further information. Note: The power supply cord(s) must be plugged into socket-outlet(s) that is / are provided with a suitable earth ground. 5G Dongle and USB 2.0 condition 5G Dongle was design for USB 3.0 connection, due to USB 2.0 spec. data rate and power limitation does not meet dongle requirement. However, 5G dongle data rate, stability does not guarantee to work well with USB 2.0. Fail as

(1) connect on Port A (USB C to A cable)

(2) only using ONE USB 2.0 C to A cable connect. USB 2.0 Type A Port Via Port A connect (USB C to A cable) to device Workaround for USB 2.0 condition We create criteria on USB 2.0 use case workaround. If host device (PC, Laptop) on have USB 2.0 Port. Please follow below instruction can get workaround solution. Via Port A connect (USB C to A cable) to external PD power adapter Via Port B connect (USB C to A cable) to device If still needed to connect device via USB 2.0 (type A), need to follow 2 criteria:

(A) Need two USB C to A Cables (not mixed). Dongle Port B connect (USB C to A cable) to device. Dongle Port A connect (USB C to A cable) to external power adapter.

(B) Plug in order is (1) Port B connect to host device first. (2) Then Port A connect to power adapter. Noficaon:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protecon against harmful interference in a residenal installaon. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instrucons, may cause harmful interference to radio communicaons. However, there is no guarantee that interference will not occur in a parcular installaon. If this equipment does cause harmful interference to radio or television recepon, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

* Reorient or relocate the receiving antenna.

* Increase the separaon between the equipment and receiver.

* Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

* Consult the dealer or an experienced radio/TV technician for help. FCC Cauon: Any changes or modificaons not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operaon is subject to the following two condions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operaon. This equipment complies with FCC radiaon exposure limits set forth for an uncontrolled environment. End user must follow the specific operang instrucons for sasfying RF exposure compliance. This equipment should be installed and operated with minimum distance 5mm between the radiator & your body.

Label with example variable data. Not for manufacture. 5G dongle Made in Indonesia Model: MD100-Q62 Default IP: 192.168.1.1 Password: 12345678 Contains FCC ID: VUIMD100 Manufacturer: PEGATRON corporation I.T.E. ACCESSORY F10 SN: MD100-Q62YYYYMMxxxxx IMEI: xxxxxxxxxxxxxxx 7mm 7mm I.T.E. ACCESSORY

( 0.5 mm) Red line is die line R0.5 33.3 2 2

. 3 Ch. 2.5mm UL, R510W Roll form packaging

Outer diameter of the paper roll core: 3'(76.2mm) Roll type

: 3'(76.2mm) Outer diameter of the paper roll: <8(203mm)

: <8(203mm) Material Structure Material Made paper Material (Brand/Model No.):

(ex.PETPPART PAPER(Brand/Model No.)) Adhesive (Brand/Model No):

(ex.Acrylic(Brand/Model No.)) Coating (Brand/Model No.):

(ex.PETOPP(Brand/Model No.)) Printable:

Printing color:

(ex.Black 100%Other) Background color:

(ex.White Other) Packing method:

Safety certification:

Printing ribbon:

SPEC 50#PET ADS1515+ADS1514 50#PET ADS1515+ADS1514 Matte YES (Ribbon : White) White Black 100%

Roll UL PGJI2 High temperature ribbon Artwork version (File name / Released date) NA Notes 1. During OQC/IQC ,the vendor QC/CM IQC/PEGA IQC must inspect all critical items marked with a 2. (): //. Full color printing (excluding single color): Must provide color tolerance sample for customer/RD/PM/ IQC (light tolerance/color specimen/dark tolerance). 3. /: , E < 2, . Spot color/Single color: Must provide color report by Colorimeter, E < 2 or define by coustumer. 4. : . Muse pass abrasion test: Define by coustumer. 5. Printing Tolerance is defined in the right column as the choose 6. This part should not contain any substances which are specified in SPT-00001/PMQ-M0003, issued by PEGATRON. 7. , Must attach the detail raw material data sheet when Approval. TOLERANCE SPEC. All Dimension 0.20mm Edge distance 0.50mm GAP distance 0.50mm PRODUCT LABEL With Pegatron Logo MD100-Q62 1510-3D2E000 Jack Jack Chen Julian F10 5G dongle Made in Indonesia I.T.E. ACCESSORY Model: MD100-Q62 Default IP: 192.168.1.1 Password: 12345678 Contains FCC ID: VUIMD100 R efere n c e o nly R efere n c e o nly R efere n c e o nly R efere n c e o nly Model: MD100-Q62 Default IP: 192.168.1.1 Password: 12345678 Contains FCC ID: VUIMD100 R efere n c e o nly R efere n c e o nly I.T.E. ACCESSORY Made in Indonesia 5G dongle F10 for Batam Label with example variable data. Not for manufacture. Made in Indonesia 5G Dongle Model: MD100-Q62 Default IP: 192.168.1.1 Password: 12345678 Contains FCC ID: VUIMD100 Manufacturer: PEGATRON corporation I.T.E. ACCESSORY F10 SN: MD100-Q62YYYYMMxxxxx IMEI: xxxxxxxxxxxxxxx 7mm 7mm I.T.E. ACCESSORY

( 0.5 mm) Red line is die line R0.5 33.3 2 2

. 3 Ch. 2.5mm UL, R510W Material (Brand/Model No.):

(ex.PETPPART PAPER(Brand/Model No.)) Adhesive (Brand/Model No):

(ex.Acrylic(Brand/Model No.)) Coating (Brand/Model No.):

(ex.PETOPP(Brand/Model No.)) Printable:

Printing color:

(ex.Black 100%Other) Background color:

(ex.White Other) Packing method:

Safety certification:

Printing ribbon:

SPEC 50#PET ADS1515+ADS1514 50#PET ADS1515+ADS1514 Matte YES (Ribbon : White) White Black 100%

Roll UL PGJI2 High temperature ribbon Artwork version (File name / Released date) NA Roll form packaging

Outer diameter of the paper roll core: 3'(76.2mm) Roll type

: 3'(76.2mm) Outer diameter of the paper roll: <8(203mm)

: <8(203mm) Material Structure Material Made paper Notes 1. During OQC/IQC ,the vendor QC/CM IQC/PEGA IQC must inspect all critical items marked with a 2. (): //. Full color printing (excluding single color): Must provide color tolerance sample for customer/RD/PM/ IQC (light tolerance/color specimen/dark tolerance). 3. /: , E < 2, . Spot color/Single color: Must provide color report by Colorimeter, E < 2 or define by coustumer. 4. : . Muse pass abrasion test: Define by coustumer. 5. Printing Tolerance is defined in the right column as the choose 6. This part should not contain any substances which are specified in SPT-00001/PMQ-M0003, issued by PEGATRON. 7. , Must attach the detail raw material data sheet when Approval. TOLERANCE SPEC. All Dimension 0.20mm Edge distance 0.50mm GAP distance 0.50mm PRODUCT LABEL Without Pegatron Logo MD100-Q62 1510-3DE5000 Jack Jack Chen Julian F10 5G dongle Made in Indonesia I.T.E. ACCESSORY Model: MD100-Q62 Default IP: 192.168.1.1 Password: 12345678 Contains FCC ID: VUIMD100 R efere n c e o nly R efere n c e o nly R efere n c e o nly R efere n c e o nly Model: MD100-Q62 Default IP: 192.168.1.1 Password: 12345678 Contains FCC ID: VUIMD100 R efere n c e o nly R efere n c e o nly I.T.E. ACCESSORY Made in Indonesia 5G dongle F10 for Batam Label Location

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: May 26, 2023 Ref: Attestation Statements Part 2.911(d)(7) Filing Grantee Code: VUI PEGATRON CORPORATION (the applicant) certifies that, as of the date of the filing of the application, Pegatron USA, Inc. is our designated U.S. agent for service of process for the above referenced Grantee Code. PEGATRON CORPORATION accepts to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The applicant further acknowledges their responsibility to inform the FCC whenever the designated agent information changes. Pegatron USA, Inc. accepts the designation by the applicant as the U.S. agent to accept service of process includes, but is not limited to, delivery of any correspondence, notices, orders, decisions, and requirements of administrative, legal, or judicial process related to Commission proceedings. Designated U.S. Agent Information:

FRN: 0032549305 Name: Pegatron USA, Inc. Address: 2870 Zanker Rd. Suite 140, San Jose, CALIFORNIA 95134, USA Contact Person: Bob Chen Tel.: 510-497-0761 Email: bob_chen@pegatroncorp.com Sincerely, Applicant U.S. Agent PEGATRON CORPORATION Pegatron USA, Inc. Nancy Yu, Senior Manager Bob Chen Signature: Signature:

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: May 19, 2023 FCC ID: VUIMD100 RE: Attestation Statements Part 2.911(d)(5)(i) Filing PEGATRON CORPORATION (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. RE: Attestation Statements Part 2.911(d)(5)(ii) Filing PEGATRON CORPORATION (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List ( as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing covered equipment. Sincerely, Applicant : PEGATRON CORPORATION _ 5F., NO. 76, LIGONG ST., BEITOU DISTRICT, TAIPEI CITY 11259, Address 2:

Taiwan Signature a Name and Job Title. : Nancy Yu, Sefior Manager E-mail : nancy_yu@pegatroncorp.com Tel. : 886-2-81439001

Permissive Change Request Letter Date: May 19, 2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Description of Permissive Change To whom it may concern, Pursuant to CFR 2.1043, PEGATRON CORPORATION, hereby requests a Class II Permissive Change for the following project(s):

FCC ID: VUIMD100 (Grant Date: 04/21/2023 (PCS) and 04/25/2023 (CBE)) The change(s) filed under this application is (are):

1.) The subject approved module is being used in different host (portable category configuration, host Model: MD100-Q62 / Brand: PEGATRON) 2.) SAR testing is performed to demonstrate compliance to RF exposure requirements. No modifications were made to circuitry of any transmitter and emissions performance remains the same as original certified ID. Sincerely yours, Applicant : PEGATRON CORPORATION 5F., NO. 76, LIGONG ST., BEITOU DISTRICT, TAIPEI CITY 11259, Address : =

aiwan Signature Name and Job Title. : Nancy Yu, Senior Marager E-mail : nancy_yu@pegatroncorp.com Tel. : 886-2-81439001

Confidentiality Request Letter Date: May 19, 2023 Federal Communications Commission Authorization and Evaluation Division Subject: Request for confidentiality FCC ID: VUIMD100 To whom it may concern:

Short-term Confidentiality pursuant to Public Notice DA 04-1705, and in order to comply with the marketing regulations in 47 C.F.R. 2.803 and the importation rules in 47 C.F.R. 2.1204 while ensuring that business-sensitive information remains confidential until the actual marketing of newly authorized devices, we are request the Commission grant temporary confidential treatment and not release the following attachments for routine public disclosure until 180 days after the grant date. 1. Internal Photographs 2. External Photographs 3. User's manual 4. Test Set up photos It is our understanding that test measurement reports and correspondence during the certification review process cannot be granted confidential treatment, and such information will be available for public review once the grant of equipment authorization is issued. Sincerely, Applicant : PEGATRON CORPORATION _ 5F., NO. 76, LIGONG ST., BEITOU DISTRICT, TAIPEI CITY 11259, Address a, Taiwan Signature Name and Job Title. : Nancy Yu, Sepjor Manager E-mail : nancy_yu@pegatron Tel. : 886-2-81439001

Letter of Authorization Date: May 19, 2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Product Certification Representative Authorization Letter FCC ID: VUIMD100 Product Name: Module To whom it may concern:

We the undersigned, hereby authorize following person to act as our agent in the preparation of an application for equipment authorization to the FCC Rules and Regulations. Sporton International Inc. No.52, Huaya 1st Rd., Guishan Dist., Taoyuan City 333,

* Taiwan (R.O.C.) Name : Leo Huang Job Title : VP e-mail : Leohuang@sporton.com.tw Address We further certify that neither the applicant nor any party to this application, as defined in 47 CFR Ch. 1.2002(b), is subject to a denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This appointment also includes the authority to complete FCC Form 731 on our behalf and sign the application as an authorized agent. Applicant : PEGATRON CORPORATION Address : 5F., NO. 76, LIGONGST., BEITOU DISTRICT, TAIPEI CITY 11259, Taiwan Signature Name and Job Title. : Nancy Yu, Se E-mail : nancy_yu@pegatroncerp.com Tel. : 886-2-81439001

Date: April 14, 2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Request to change in Identification To Whom It May Concern:

This application for Change of Identification request a new FCC ID as stipulated in 47CFR 2.933(b) for presently authorized equipment. This application by PEGATRON CORPORATION will establish a new FCC ID under FCC ID:

VUIMD100 for the purpose of marketing. The original grant to Fibocom Wireless Inc., FCC ID: ZMOFM160NA will remain in effect. Per 2.933(b)

(1) The original identification is FCC ID: ZMOFM160NA

(2) The original grant date is 06/01/2022

(3) The equipment is electrically and functionally identical. Only the model name, trade name and FCC ID number are different.

(4) The hardware and software is identical with original granted.

(5) The original test results are applicable and representative of this changed device. Sincerely yours, Applicant : PEGATRON CORPORATION _ 5F., NO. 76, LIGONG ST., BEITOU DISTRICT, TAIPEI CITY 11259, Address Do Taiwan Signature Name and Job Title. : Nancy Yu, Senif Manager /

E-mail : nancy_yu@pe' troncorp.com Tel. : 886-2-81439001

Federa al Commun nications C n Commission Author rization an d Evaluatio n on Division 7435 O Oakland Mill s Rd Date: April 1 D 12, 2023 Columb bia MD 2104 46-1609 Subjec ct: Request t of Identifi cation Aut horization To Who om It May C Concern:

This let tter grants a authorizatio on for repre esentatives of PEGATR RON CORP PORATION to apply the FCC C for a chan nge in ident tification as stipulated under 47CF FR2.933 of the FCC ru les. This au uthorization applies to Fiboco om Wireless s Inc., FCC C ID: ZMOF M160NA (O Original gra nt date: 06/

/01/2022). The eq uipment is electrically identical. T The only ch hange being g the label on the dev vice. The original l test res ults, techn nical inform mation and d relevant documen e nt continue to be represe entative of t he applicab ble to the ch hange equip pment. We are e aware tha at PEGATR RON CORP PORATION intends to product t under FCC C ID: VUIMD D100 market the e above re ferenced Sincere ely yours, Applica ant Addres ss Signatu ure

: Fiboc com Wireles ss Inc. 1101,

,Tower A, B Building 6, S Shenzhen In nternational Innovation Valley, Dash hi 1st Rd, Na anshan, Sh enZhen, Ch hina

_____ _________ __________ __________ ___ Name and Job Tit tle.

: Lucy Liu E-mail Tel.

: lucy.li u@fibocom m.com

: 86755 526733555

Letter of Authorization Date: April 14, 2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Product Certification Representative Authorization Letter FCC ID: VUIMD100 Product Name: Module To whom it may concern:

We the undersigned, hereby authorize following person to act as our agent in the preparation of an application for equipment authorization of model MD100-Q62 to the FCC Rules and Regulations. Sporton International Inc. Address : No.52, Huaya 1st Rd., Guishan Dist., Taoyuan City 333, Taiwan (R.O.C.) Name : Leo Huang Job Title : VP e-mail : Leohuang@sporton.com.tw We further certifies that neither the applicant nor any party to this application, as defined in 47 CFR Ch. 1.2002(b), is subject to a denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This appointment also includes the authority to complete FCC Form 731 on our behalf and sign the application as an authorized agent. Applicant : PEGATRON CORPORATION Address : 5F., NO. 76, LIGONG ST., BEITOU DISTRICT, TAIPEI CITY 11259, Taiwan Signature Name and Job Title. : Nancy Yu, 9 nior Manager E-mail : nancy_yu@pegatroncorp.com Tel. : 886-2-81439001

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: April 14, 2023 FCC ID: VUIMD100 RE: Attestation Statements Part 2.911(d)(5)(i) Filing PEGATRON CORPORATION (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. RE: Attestation Statements Part 2.911(d)(5)(ii) Filing PEGATRON CORPORATION (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Sincerely, Applicant Address Signature Name and Job Title. E-mail Tel.

: PEGATRON CORPORATION

: 5F., NO. 76, LIGONG ST., BEITOU DISTRICT, TAIPEI CITY 11259,

* Taiwan A AS

: Nancy Yu, Sef ior Manager

: nancy_yu@pegatroncorp.com

: 886-2-81439001

PEGJ\TRON Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: April 14, 2023 Ref: Attestation Statements Part 2. 911 (d)(7) Filing Grantee Code: VUI PEGATRON CORPORATION ("the applicant") of the certifies that, as of the date of the filing applicati on, Pegatron USA, Inc. is our designated U.S. agent for service of process for the above referenced Grantee Code. PEGATRON CORPORATION accepts to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The applicant further acknowledges their responslity to inform the FCC whenever the designated agent information changes Pegatron USA, Inc. accepts the designation by the applicant as the U.S. agent to accept service of process includes, but is not limited to, delivery of any correspondence, notices, orders, decisions, and requirements of administrative, legal, or judicial process related to Commission proceedings Designated U.S. Agent Information FRN: 0032549305 Name: Pegatron USA, Inc. Address:

2870 Zanker Rd. Suite 140, San Jose, CALIFORNIA 95134, USA Contact Person:

Bob Chen Tel.: 510-497-0761 Email: bob_chen@pegatroncorp.co m Sincerely,

[ Applicant I U.S. Agent