all | frequencies |
|
|
exhibits | applications |
---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Annex to User Manual | Users Manual | 615.88 KiB | May 08 2008 | |||
1 |
|
User Manual | Users Manual | 1.42 MiB | May 08 2008 | |||
1 | Cover Letter(s) | May 08 2008 | ||||||
1 | External Photos | May 08 2008 | ||||||
1 | ID Label/Location Info | May 08 2008 | ||||||
1 | Internal Photos | May 08 2008 | ||||||
1 | Cover Letter(s) | May 08 2008 | ||||||
1 | Cover Letter(s) | May 08 2008 | ||||||
1 | Test Report | May 08 2008 | ||||||
1 | Test Setup Photos | May 08 2008 |
1 | Annex to User Manual | Users Manual | 615.88 KiB | May 08 2008 |
PEIKER group of companies PHOENIX TEST-LAB GmbH Product Certification K6nigswinkel 10 D 32825 Blomberg Date: 2008-08-04 FCC ID: QWY-CKIV-BT2 Subject: Compliance Statement in Car Manual Dear Sirs, Our products with the above FCC ID are delivered with individual user manuals for each mobile phone type. We hereby assure that the following caution statement as per CFR 47, 15.21 is included in a prominent location of the individual user manual of the product:
The title CAUTION TO USERS or FCC WARNING: NOTE or relevant title and Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. In addition, we also assure that the following statement is also included in a prominent location in the manual as per CFR 47, 15.19(a)(3):
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation If you have any questions, please feel free to contact me at the address shown below. Yours sincerely, Name Andreas Froidl Position Senior Project Manager Company Peiker acustic GmbH & Co. KG Adress Max-Planck-StraBe 31, 61381 Friedrichdorf, Germany Tel.: +49 6172 767 227 Fax.: +49 6172 767 220 E-Mail andreas. froidl @ peiker.de Signatory PEIMCER acustie GmbH & Co. KG, Max-Planck-Str. 42
, 61381 Friedrichsdorf / Ta, 7L G hy iV. Wolfgang Frderer LA. Andre SF roial Amtsgericht Bad Homburg HRA 1897 phG: PEIKER Verwaltungs GmbH, Vorsitzender der Geschftsfiihrung: Andreas Peiker, Geschaftsfilhrer: Stephan Graf von der Schulenburg, Amtsgericht Bad Homburg 1369 Ein Unternehmen der PEIKER Firmengruppe
1 | User Manual | Users Manual | 1.42 MiB | May 08 2008 |
Halter_Nokia_6500.fm Seite -2 Freitag, 20. Juni 2008 9:07 09 Zubehr Accessories Accessoires Montageanleitung Halter Mobiltelefon Installation Instructions Mobile telephone cradle Instructions de montage Support de tlphone portable Halter_Nokia_6500.fm Seite -1 Freitag, 20. Juni 2008 9:07 09 Halter Mobiltelefon Seite 1 Mobile telephone cradle Page 15 Support de tlphone portable Page 29 Halter_Nokia_6500.fm Seite 0 Freitag, 20. Juni 2008 9:07 09 1 M+P-03F-7185 Halter_Nokia_6500.fm Seite 1 Freitag, 20. Juni 2008 9:07 09 Gltigkeit Diese Montageanleitung ist gltig fr Fahr-
zeuge mit Vorrstung Mobiltelefon mit Schnitt-
stelle (Code 386) oder Mercedes-Benz Mobiltelefon
(Code 388) in Verbindung mit einem Mobiltelefon Nokia 6500. Einzelteile Nachfolgend als Halter bezeichnet.
(1) Halter Mobiltelefon Hinweise Falls bei der Montage Schwierigkeiten auf-
treten, wenden Sie sich bitte an eine quali-
fizierte Fachwerkstatt. Mercedes-Benz em-
pfiehlt Ihnen hierfr einen Mercedes-Benz Service-Sttzpunkt. nderungen von technischen Details gegen-
ber Abbildungen der Montageanleitung sind vorbehalten. In dieser Montageanleitung wird auf die COMAND-, Audio- bzw. Fahrzeug-Betriebs-
anleitung und die Betriebsanleitung des Mobiltelefons verwiesen. Bitte halten Sie diese bereit. Bei hohen Umgebungstemperaturen kann der Halter whrend des Betriebs, wie der Fahrzeuginnenraum auch, sehr hei werden.
- 1 -
Halter_Nokia_6500.fm Seite 2 Freitag, 20. Juni 2008 9:07 09 Seite 8 Seite 4 Seite 5 Seite 6 Inhaltsverzeichnis Halter montieren Mobiltelefon einsetzen Mobiltelefon mit Halter koppeln Mobiltelefon mit Halter verbinden Seite 9 Seite 9 In Freisprechmodus wechseln Seite 10 Kfz-Profil anlegen Seite 11 Allgemeine Bedienhinweise Seite 12 Schnellwahltasten Seite 13 Mobiltelefon entnehmen Seite 14 Halter demontieren Seite 14 manuell verbinden automatisch verbinden
- 2 -
Halter_Nokia_6500.fm Seite 3 Freitag, 20. Juni 2008 9:07 09 GUnfallgefahr Beachten Sie beim Betrieb des Tele-
fons im Fahrzeug die gesetzlichen Bestimmungen des Landes, in dem Sie sich momentan aufhalten. Ist die Bedienung eines Telefons whrend der Fahrt gesetzlich zuge-
lassen, so bedienen Sie dieses nur, wenn es die Verkehrssituation zu-
lsst. Sie knnten sonst vom Ver-
kehrsgeschehen abgelenkt werden, einen Unfall verursachen und sich und andere verletzen. Benutzen Sie whrend der Fahrt aus Sicherheitsgrnden nur die Frei-
sprecheinrichtung zum Telefonie-
ren. Wenn Sie mit der Freisprecheinrich-
tung telefonieren, fahren Sie auf-
merksam, schlieen Sie alle Fenster und vermeiden Sie alle strenden Gerusche. Halten oder parken Sie, wenn Sie zum Telefonieren nicht die Frei-
sprecheinrichtung benutzen wollen. Halten oder parken Sie nicht im Halte- oder Parkverbot. Montieren und koppeln Sie das Telefon-Modul nur bei Fahrzeug-
stillstand. Sie knnten sonst vom Straenverkehr abgelenkt werden und einen Unfall verursachen.
- 3 -
Halter_Nokia_6500.fm Seite 4 Freitag, 20. Juni 2008 9:07 09 Halter montieren 2 1 M+P-03F-7180 1. Halter (1) auf die Kontaktplatte (2) schieben, bis er hrbar einrastet.
- 4 -
Halter_Nokia_6500.fm Seite 5 Freitag, 20. Juni 2008 9:07 09 Mobiltelefon einsetzen Die Nutzung der Freisprecheinrichtung und der Telefonfunktionen ber das Bediensystem/den Bordcomputer ist nur mglich, wenn sich das Mobiltelefon im Halter befindet und eine Bluetooth-
Verbindung aufgebaut ist. 4 1 8 3 def mno wxyz abc jkl tuv ghi pqrs
M+P-03F-7186 1. Abdeckung (8) entfernen. 2. Mobiltelefon (3) wie abgebildet im Halter (1) einrasten. Hinweis Darauf achten, dass die Verriegelung (4) korrekt am Mobiltelefon (3) einrastet, da ansonsten keine Verbindung zwischen Mobiltelefon und Halter besteht. Das Mobiltelefon gegebenenfalls erneut einsetzen.
- 5 -
Halter_Nokia_6500.fm Seite 6 Freitag, 20. Juni 2008 9:07 09 Mobiltelefon mit Halter Mobiltelefon koppeln Zum Koppeln kann sich das Mobiltelefon im Halter oder auerhalb des Halters im Fahrzeug befinden. 1. Zndschlssel in Stellung 1, 2 oder 3 drehen, siehe Fahrzeug-Betriebsanleitung. 2. Verbindungen Bluetooth Ein am Mobiltelefon whlen, siehe Betriebs-
anleitung Mobiltelefon. Hinweis (Fahrzeuge der C-Klasse W/S 204) Das Mobiltelefon sollte zum koppeln in den Halter eingesetzt werden. Men Einstellungen 6 7 M+P-03F-7187 3. Bluetooth-Taste (6) ca. 2 Sekunden drcken. Die Leuchtdiode (7) blinkt in schneller Frequenz. Der Halter ist ca. 2 Minuten fr suchende Gerte sichtbar und kann vom Mobiltelefon erkannt werden.
- 6 -
Halter_Nokia_6500.fm Seite 7 Freitag, 20. Juni 2008 9:07 09 Men Einstellungen Passkey 62872 am Mobiltelefon MB N6500Cradle am Mobiltelefon 4. Verbindungen Bluetooth Audio Zubehr such. am Mobiltelefon whlen, siehe Betriebsanleitung Mobiltelefon. Das Mobiltelefon beginnt mit der Suche nach dem Halter. Wurde der Halter vom Mobiltelefon gefunden, erscheint MB N6500Cradle im Display des Mobiltelefons. Hinweis Es wird empfohlen die Anfrage: Telefon fr alle suchenden Gerte sichtbar machen? mit Nein abzulehnen, siehe Betriebsanleitung Mobiltelefon. 5. whlen. Im Display des Mobiltelefons erscheint eine Passkey-Abfrage. 6. eingeben und mit OK besttigen. 7. Verbindung durch das Gert zulassen? mit Ja besttigen, um einen automatischen Verbindungsaufbau zwischen Mobiltelefon und Halter zu ermglichen. Hinweis Der gewhlte Gertename des Halters darf im Speicher des Mobiltelefons noch nicht existieren, ansonsten meldet das Mobiltelefon Bluetooth-Verbindung fehlgeschlagen. Der bereits im Speicher des Mobiltelefons existierende Halter muss umbenannt oder aus dem Speicher gelscht werden, siehe Betriebsanleitung Mobiltelefon. Sobald der Passkey eingegeben und akzeptiert wurde, besttigt das Mobiltelefon den Verbindungsaufbau. Die Verbindung zwischen Mobiltelefon und Halter wird automatisch getrennt, wenn das Mobil-
telefon zum koppeln nicht in den Halter eingesetzt war. Automatisches Herstellen einer
- 7 -
Halter_Nokia_6500.fm Seite 8 Freitag, 20. Juni 2008 9:07 09 8. Das Mobiltelefon ist nun bereit fr die Nutzung in der Freisprecheinrichtung. Hinweis Es knnen maximal 4 Mobiltelefone mit dem Halter gekoppelt werden. Wird ein fnftes Mobiltelefon mit dem Halter gekoppelt, so wird das zuerst gekoppelte Mobiltelefon aus dem Speicher gelscht. Mobiltelefon mit Halter Mobiltelefon verbinden Nach dem Koppeln erfolgt der Verbindungs-
aufbau zwischen Mobiltelefon und Halter automatisch, sobald das Mobiltelefon in den Halter eingesetzt wird. Die Leuchtdiode am Halter leuchtet dauerhaft. Fr eine korrekte Funktion der Freisprech-
einrichtung darf das in den Halter eingesetzte Mobiltelefon nicht zeitgleich mit der Bluetooth-Schnittstelle des COMAND-
oder Audio-Systems verbunden sein, siehe COMAND- bzw. Audio-Betriebsanleitung. Mobiltelefon in den Halter einsetzen und Zndschlssel in Stellung 1, 2 oder 3 drehen, siehe Fahrzeug-Betriebsanleitung. Hinweise Es ist immer nur das Mobiltelefon mit dem Halter verbunden, welches eingesetzt ist. Zur Nutzung der Freisprecheinrichtung muss das Mobiltelefon in den Halter eingesetzt sein. Erfolgt keine automatische Verbindung zwischen Mobiltelefon und Halter, so kann diese manuell hergestellt werden, siehe Seite 9. Der Akku des Mobiltelefons wird in Zndschlsselstellung 1, 2 oder 3 geladen. Es kann nicht jeder Klingelton ber COMAND oder das Bediensystem/den Bordcomputer wiedergegeben werden.
- 8 -
Halter_Nokia_6500.fm Seite 9 Freitag, 20. Juni 2008 9:07 09 Whrend einer aktiven Verbindung zwischen Mobiltelefon und Halter erscheint im Bediensystem/Bordcomputer der Name des Mobilfunkanbieters, insofern Netzempfang besteht. Mobiltelefon mit Halter Mobiltelefon manuell verbinden 1. Mobiltelefon in den Halter einlegen. 2. Bluetooth-Taste am Halter drcken. oder:
Bei Fahrzeugen der S-Klasse, W/V 221, und der CL-Klasse, C 216, mit dem COMAND-Controller Tel Tel Telefon whlen, siehe Fahrzeug-Betriebsanleitung. Bei einigen Baureihen Taste drcken, siehe COMAND-
oder Audio-Betriebsanleitung. Hinweis Vor dem manuellen Verbinden muss das Mobiltelefon mit dem Halter gekoppelt sein, siehe Seite 6. Mobiltelefon mit Halter Mobiltelefon automatisch verbinden Men Einstellungen 1. Verbindungen Bluetooth Gekoppelte Gerte am Mobiltelefon whlen, siehe Betriebsanleitung Mobiltelefon. 2. whlen. Optionen Einstellungen Aut. 3. Verb. ohne Best. am Mobiltelefon whlen und mit Ja besttigen, siehe Betriebsanleitung Mobiltelefon. MB N6500Cradle am Mobiltelefon
- 9 -
Halter_Nokia_6500.fm Seite 10 Freitag, 20. Juni 2008 9:07 09 In den Freisprechmodus wechseln Fr eine korrekte Funktion der Freisprech-
einrichtung muss das eingesetzte und einge-
schaltete Mobiltelefon automatisch in den Freisprech-Modus wechseln. 3 M+P-03F-7188 Im Display des Mobiltelefons erscheint ein kleines Fahrzeugsymbol (Pfeil). Ist dies nicht der Fall, Mobiltelefon (3) entnehmen und er-
neut einsetzen. Hinweise Die Bluetooth-Verbindung zwischen Mobil-
telefon und Halter wird nach Entnahme des Mobiltelefons aus dem Halter automatisch getrennt. Nach automatischer Trennung der Blue-
tooth-Verbindung zwischen Mobiltelefon und Halter wird ein aktives Gesprch am Mobiltelefon fortgefhrt. Ein aktives Gesprch wird durch Einstecken des Mobiltelefons in den Halter im Fahrzeug automatisch mit der Freisprecheinrichtung verbunden. Es erfolgt keine Rufnummern-
anzeige im COMAND- bzw. Audio-System.
- 10 -
Halter_Nokia_6500.fm Seite 11 Freitag, 20. Juni 2008 9:07 09 Kfz-Profil anlegen Nach erstmaligem Koppeln und Verbinden zwischen Mobiltelefon und Halter legt das Mobiltelefon automatisch ein eigenes Profil fr den Freisprech-Modus an, in welches das Mobiltelefon beim Einsetzen in den Halter automatisch wechselt, siehe Betriebsanleitung Mobiltelefon. Im Profil fr den Freisprech-Modus knnen Rufton und Ruftonlautstrke auf das Fahrzeug abgestimmt werden. Hinweise Sollten Sie im Profil fr den Freisprech-
Modus Aktives Profil eingestellt und als normales Profil Lautlos aktiviert haben, erfolgt auch bei in den Halter eingesetztem Mobiltelefon keine Ruftonwiedergabe. Sollten Sie das Profil Flug aktiviert haben, erfolgt kein Verbindungsaufbau zwischen Halter und eingesetztem Mobiltelefon, siehe Betriebsanleitung Mobiltelefon. 1. unter Men Einstellungen Zubehr Freisprechen Standardprofil z.B. Mein Profil 1 einstellen. 2. Klingellautstrke einstellen: Am Mobiltelefon unter Men Einstellungen Profile Mein Profil 1 ndern Ruftonlautstrke die Lautstrke einstellen. Profil bearbeiten: Am Mobiltelefon
- 11 -
Halter_Nokia_6500.fm Seite 12 Freitag, 20. Juni 2008 9:07 09 Allgemeine Bedienhinweise Beim Mobiltelefon Nokia 6500 muss im Men Einstellungen Telefon Netzmodus GSM eingestellt werden. Am Mobiltelefon darf die Flug-Anfrage nicht eingeschaltet sein, da ansonsten kein Verbindungsaufbau zwischen Halter und eingesetztem Mobiltelefon erfolgt, siehe Betriebsanleitung Mobiltelefon. Zur Bedienung des Mobiltelefons ber das Multifunktionslenkrad siehe COMAND-, Audio- bzw. Fahrzeug-Betriebsanleitung. Mit oder kann whrend eines Telefonats die Lautstrke verndert werden. Die Einstellung der Rufnummernbertragung wechselt beim eingesetzten Mobiltelefon in die Einstellung Netzabhngig, siehe Be-
triebsanleitung Mobiltelefon. Eine bertra-
gung der Rufnummer im Freisprechmodus muss beim Netzbetreiber bzw. Dienstanbie-
ter eingestellt werden. Fr diese Einstellung wenden Sie sich bitte an Ihren Netzbetreiber bzw. Dienstanbieter. In neueren Fahrzeugen knnen die 30 aktuellsten Kurzmitteilungen am COMAND-
bzw. Audio-System angezeigt werden. Im Eingangsordner des Mobiltelefons sollten nicht zu viele Kurzmitteilungen gespeichert sein, siehe Betriebsanleitung Mobiltelefon. Es wird empfohlen das Mobiltelefon mindestens einmal im Monat auszuschalten, siehe Betriebsanleitung Mobiltelefon.
- 12 -
Halter_Nokia_6500.fm Seite 13 Freitag, 20. Juni 2008 9:07 09 Schnellwahltasten Schnellwahltaste fr Mailbox Die Taste A kann als Schnellwahltaste fr die Mailbox belegt werden. Taste Aam Mobiltelefon ca. 3 Se-
Schnellwahltaste belegen 1. kunden drcken. Im Display des Mobil-
telefons erscheint die Meldung Erst Nummer fr Sprachmailbox speichern, dann eine Aufforderung zur Eingabe der Telefon-
nummer der Mailbox. 2. Am Mobiltelefon die Telefonnummer der Mailbox eingeben und besttigen. Schnellwahltaste abrufen Am COMAND- bzw. Audio-System Taste A ca. 3 Sekunden drcken. Andere Schnellwahltasten (Kurzwahl) Bei einigen Baureihen kann ber die Tas-
ten 2 bis 9 am COMAND- bzw. Audio- System auf die Speicherpltze 2 bis 9 der SIM-Karte zugegriffen werden. Hinweis Die Speicherpltze 2 bis 9 der SIM-Karte mssen entsprechend Ihren Wnschen be-
legt sein. Bei Nokia-Mobiltelefonen des Typs 6500 wird der Speicherplatz auf der SIM-
Karte nicht angezeigt. Durch Drcken der Tasten 2 bis 9 am Bediensystem wird die entsprechende Telefonnummer angezeigt. Soll z.B. eine Telefonnummer auf die Schnellwahltaste 3 gelegt werden, muss diese am Ziffernblock des Bediensystems gewhlt und kann dann bei Bedarf am Mobiltelefon umbenannt werden, siehe Betriebsanleitung Mobiltelefon. Schnellwahltaste abrufen Am COMAND- bzw. Audio-System ent-
sprechende Taste ca. 3 Sekunden drcken.
- 13 -
Halter_Nokia_6500.fm Seite 14 Freitag, 20. Juni 2008 9:07 09 Mobiltelefon entnehmen 4 3 1 d e f mno wxyz a b c jkl tuv ghi pqrs
M+P-03F-7189 1. Verriegelung (4) nach oben schieben, und Mobiltelefon (3) aus dem Halter (1) nehmen. Halter Mobiltelefon demontieren 1. Mobiltelefon aus dem Halter entneh-
men (siehe oben). 5 1 M+P-03F-7184 Entriegelungsknopf (5) drcken, Hal-
2. ter (1) nach unten schieben und abnehmen.
- 14 -
Halter_Nokia_6500.fm Seite 15 Freitag, 20. Juni 2008 9:07 09 Validity These installation instructions are valid for vehicles equipped with a Mobile phone fitting with interface
(Code 386) or Mercedes-Benz mobile phone
(code 388)
(1) Mobile phone cradle
- Each in combination with Nokia mobile phone 6500. Components In the following text, this will be referred to as "cradle". Notes Please contact a qualified specialist workshop if you encounter difficulties when fitting the telephone module. Mercedes-Benz recommends that you use a Mercedes-Benz Service Centre for this purpose. The manufacturer reserves the right to change technical details from those shown in the illustrations contained in these installation instructions. These installation instructions also refer to the COMAND and Audio Operating Instructions, the vehicle Owner's Manual and the mobile phone operating instructions. Please keep them handy for reference. At high outside temperatures, the cradle can become very hot when in operation, as is the case with the vehicle interior itself.
- 15 -
Halter_Nokia_6500.fm Seite 16 Freitag, 20. Juni 2008 9:07 09 Contents Fitting the holder Inserting the mobile phone Pairing the mobile phone with the cradle Connecting the mobile phone to the cradle Connecting the mobile phone manually Connecting the mobile phone automatically Page 18 Page 19 Page 20 Page 22 Page 23 Page 23 Switching to hands-free mode Page 24 Setting up the vehicle profile Page 25 General notes on operation Page 26 Speed-dial keys Page 27 Removing the mobile phone Page 28 Removing the cradle Page 28
- 16 -
Halter_Nokia_6500.fm Seite 17 Freitag, 20. Juni 2008 9:07 09 GRisk of accident Please comply with the legal regulations of the country in which you are driving when you are using the telephone inside the vehicle. If it is legally permissible to use the telephone while driving, only do so when traffic conditions allow for it. You may otherwise become distracted from the traffic, which may lead to an accident in which you or others may be injured. For safety reasons, only use the hands-free system when making calls while driving. When you are using the mobile phone via the hands-free system, drive with extra caution, close all windows and try to eliminate background noise. Please pull over or park the car if you do not wish to use the hands-
free system to make a call. Do not stop the vehicle or park where it is prohibited to do so. Place the telephone module into the cradle only while the vehicle is at a standstill. You could otherwise be distracted and cause an accident.
- 17 -
Halter_Nokia_6500.fm Seite 18 Freitag, 20. Juni 2008 9:07 09 Fitting the holder 2 1 M+P-03F-7180 1. Slide the cradle (1) onto the contact plate (2) until it audibly engages.
- 18 -
Halter_Nokia_6500.fm Seite 19 Freitag, 20. Juni 2008 9:07 09 Inserting the mobile phone It is only possible to use the hands-free system and the telephone functions via the operating system/on-board computer when the mobile phone is in the cradle and a Bluetooth connection is established. 4 1 8 3 def mno wxyz abc jkl tuv ghi pqrs
M+P-03F-7186 Insert the mobile phone (3) into the 1. Remove the cover (8). 2. cradle (1) as shown. Note Make sure that the locking tab (4) is correctly engaged on the mobile phone (3), as otherwise there is no connection between the mobile phone and the cradle. If necessary, reinsert the mobile phone.
- 19 -
Halter_Nokia_6500.fm Seite 20 Freitag, 20. Juni 2008 9:07 09 Turn the ignition key to position 1, 2 or Pairing the mobile phone with the cradle For pairing, the mobile phone must not be in the cradle, but it must be in the vehicle. 1. 3. (Please refer to the vehicle Owner's Manual.) 2. Select Menu Settings Connections Bluetooth ON on the mobile phone.
(Please refer to the mobile phone operating instructions.) Note: For C-class vehicles, W/S 204 The mobile phone should always be inserted in the cradle for pairing. 6 7 M+P-03F-7187 Press the Bluetooth button (6) for 3. approximately 2 seconds. The LED (7) flashes rapidly. The cradle is visible to searching devices for approx. 2 minutes and can be detected by the mobile phone.
- 20 -
Halter_Nokia_6500.fm Seite 21 Freitag, 20. Juni 2008 9:07 09 Enter the number 62872 (passkey) on 4. Select Menu Settings Connections Bluetooth Search for audio devices on the mobile phone. (Please refer to the mobile phone operating instructions.) The mobile phone begins searching for the cradle. When the mobile phone finds the cradle, MB N6500Cradle appears in the mobile phone display. Note When you receive the request: Make phone visible to all devices? it is recommended to reject the request with No. (Please refer to the mobile phone operating instructions.) 5. Select "MB N6500Cradle" on the mobile phone. A passkey prompt appears in the display of the mobile phone. 6. the mobile phone and confirm with "ok". 7. Confirm the request Allow automatic establishing of a connection via the device?
with Yes in order to make an automatic connection between the mobile phone and the cradle possible. Note The selected device name of the cradle must not already be used in the memory of the mobile phone, as otherwise the mobile phone issues the message "Bluetooth connection failed". The cradle which is already in the memory of the mobile phone must be renamed or deleted from the memory. (Please refer to the mobile phone operating instructions.) As soon as the passkey has been entered and accepted, the mobile phone confirms the connection setup. The connection between the mobile phone and cradle is terminated automatically if the mobile phone is not in the cradle during the pairing procedure.
- 21 -
Halter_Nokia_6500.fm Seite 22 Freitag, 20. Juni 2008 9:07 09 The mobile phone is now ready to be 8. used with the hands-free system. Note A maximum of 4 mobile phones may be paired with the cradle. If a fifth mobile phone is paired with the mobile phone cradle, the mobile phone that was paired first is deleted. Connecting the mobile phone to the cradle After the pairing, the connection between the mobile phone and the cradle is established automatically as soon as the mobile phone is inserted in the cradle. The LED on the cradle lights up continuously. In order for the hands-free system to function properly, the phone which is in the cradle may not be connected with the Bluetooth interface of COMAND or the Audio System. Please refer to the separate Operating Instructions of COMAND or the Audio System. Insert the mobile phone in the cradle and turn the ignition key to position 1, 2 or 3.
(Please refer to the vehicle Owner's Manual.) Notes Only the mobile phone which is inserted in the cradle is connected to the cradle. In order to use the hands-free system, the mobile phone must be inserted in the cradle. If the mobile phone cradle and the mobile phone are not connected automatically, the connection can be established manually
(see page 23). The mobile phone battery is charged when the ignition key is in position 1, 2 or 3. Not every ring tone can be issued by COMAND or the vehicle's operating system/
on-board computer.
- 22 -
Halter_Nokia_6500.fm Seite 23 Freitag, 20. Juni 2008 9:07 09 While there is a connection between the mobile phone and the cradle, the name of the mobile service provider is displayed in the operating system/on-board computer, as long as there is sufficient reception. Insert the mobile phone in the cradle. Push the Bluetooth button on the Manually connecting the mobile phone with the mobile phone cradle 1. 2. cradle. Or:
For S-Class vehicles, W/V 221, and CL-Class vehicles, C 216:
Select Tel Tel Telephone using the COMAND controller. (Please refer to the vehicle Owner's Manual.) On some model series Press the button. (Refer to the COMAND or Audio Operating Instructions.) Note Before being manually connected, the mobile phone must be paired with the cradle
(see page 20). Automatically connecting the mobile phone with the mobile phone cradle 1. Select Menu Settings Connections Bluetooth Paired devices on the mobile phone. (Please refer to the mobile phone operating instructions.) 2. Select MB N6500Cradle on the mobile phone. 3. Select Options Settings Auth. Conn. w/o Conf. on the mobile phone and confirm with Yes. (Please refer to the mobile phone operating instructions.)
- 23 -
Halter_Nokia_6500.fm Seite 24 Freitag, 20. Juni 2008 9:07 09 Switching to hands-free mode For the hands-free system to operate properly, the mobile phone has to be inserted and switched on, and hands-free mode has to be activated. 3 M+P-03F-7188 A small vehicle (arrow) appears in the display. If the small vehicle does not appear:
remove and re-insert the mobile phone (3). Notes The Bluetooth connection between the mobile phone and the cradle is interrupted automatically when the mobile phone is removed from the cradle. After the Bluetooth connection between the mobile phone and the cradle is interrupted automatically, if there is an active call it will continue on the mobile phone. An active call is automatically connected with the hands-free system when you insert the mobile phone in the cradle in the vehicle. The telephone number is not displayed in COMAND or the audio system.
- 24 -
Halter_Nokia_6500.fm Seite 25 Freitag, 20. Juni 2008 9:07 09 Setting up the vehicle profile After pairing and setting up a connection between the mobile phone and cradle for the first time, the mobile phone automatically creates its own profile for the hands-free mode. The mobile phone switches automatically to this mode when inserted in the cradle. (Please refer to the mobile phone operating instructions.) The ring tone and ring tone volume can be adapted to the vehicle in the hands-free mode profile. Note If you have not set "Current profile" in the profile for the hands-free mode and have enabled "Silent" as the normal profile, no ringtone sounds even if the mobile phone is inserted in the cradle. If you have activated the Flight profile, no connection will be established between the cradle and the inserted mobile phone.
(Please refer to the mobile phone operating instructions.) 1. Menu Settings Accessories Handsfree Default profile set, for example, My style 1. 2. Setting the ring tone volume: Set the ring tone volume on the mobile phone in Menu Settings Profile My profile 1 Change Ring tone volume. Editing a profile: On the mobile phone in
- 25 -
Halter_Nokia_6500.fm Seite 26 Freitag, 20. Juni 2008 9:07 09 General notes on operation On the Nokia 6500 mobile phone, open the menu and set "Settings" "Phone"
"Network mode" "GSM". On the mobile phone, the Flight request function must not be activated, otherwise the connection between the cradle and the inserted mobile phone will not be established. (Please refer to the mobile phone operating instructions.) For information on operating the mobile phone via the multi-function steering wheel, see the COMAND and/or Audio Operatingnstructions and/or the vehicle Owner's Manual. Press the or buttons to adjust the volume during a telephone call. The setting for transmitting and displaying the telephone number switches to Set by network when the mobile phone is placed in the cradle. (Please refer to the mobile phone operating instructions.) The settings for the transmission of the telephone number in hands-free mode must be made by the network provider or the service provider. To make these settings, please contact the network provider or the service provider. In newer vehicles, the 30 most recent text messages (SMS) can be displayed in the COMAND or Audio system. You should not store too many text messages (SMS) in the Inbox of the mobile phone. (Please refer to the mobile phone operating instructions.) It is recommendable to switch off the mobile phone at least once a months. (Please refer to the mobile phone operating instructions.)
- 26 -
Halter_Nokia_6500.fm Seite 27 Freitag, 20. Juni 2008 9:07 09 Enter the voice mailbox number on the Speed-dial keys Speed-dial key for mailbox The A key can be programmed as a speed-dial key for your mailbox. To program the speed-dial key:
1. Press button Aon the mobile phone for approximately 3 seconds. In the mobile phone display the message Save voice mailbox number first appears, then a request for you to enter the telephone number of the mailbox. 2. mobile phone and confirm. Calling up a speed-dial key Press the A button on COMAND and/or the Audio system for approx. 3 seconds. Other speed-dial keys On some vehicle model series it is possible to access the SIM card memory keys 2 to 9 via the buttons 2 to 9 on COMAND and/or the Audio system. Note You must save numbers on memory keys 2 to 9 on the SIM card according to your preference. On Nokia mobile phone 6500, the SIM card memory keys are not displayed. Press buttons 2 to 9 on the operating system in order to show the corresponding number. If, for example, a telephone number is saved on speed-dial key 3, then this number must be selected on the operating system keypad and may, if necessary, be renamed on the mobile phone. (Please refer to the mobile phone operating instructions.) Calling up a speed-dial key Press and hold the corresponding button on COMAND or the Audio system for approx. 3 seconds.
- 27 -
Halter_Nokia_6500.fm Seite 28 Freitag, 20. Juni 2008 9:07 09 Removing the mobile phone 4 3 1 d e f mno wxyz a b c jkl tuv ghi pqrs
M+P-03F-7189 1. Slide the locking tab (4) upwards and remove the mobile phone (3) from the cradle (1). Detaching the mobile phone cradle 1. Remove the mobile phone from the cradle (see above). 5 1 M+P-03F-7184 Press the release button (5), slide the 2. cradle (1) downwards and remove.
- 28 -
Halter_Nokia_6500.fm Seite 29 Freitag, 20. Juni 2008 9:07 09 Validit Ces instructions de montage s'appliquent aux vhicules dots du prquipement pour tlphone portable avec interface (code 386), du tlphone portable Mercedes-Benz
(code 388)
(1) Support de tlphone portable en liaison avec un tlphone portable Nokia 6500. Dtail des pices ci-aprs dnomm support. Nota En cas de difficults lors du montage, veuillez vous adresser un atelier qualifi. Mercedes-Benz vous recommande pour cela de vous adresser un point de service Mercedes-Benz. Sous rserve de modification de dtails techniques par rapport aux illustrations de ces instructions de montage. Ces instructions de montage renvoient la notice d'utilisation du systme COMAND, du systme audio ou du vhicule, ainsi qu'
celle du tlphone portable. Veuillez tenir celles-ci porte de main. Lorsque la temprature ambiante est leve, le support pendant son utilisation, ainsi que l'habitacle, peuvent devenir trs chauds.
- 29 -
Halter_Nokia_6500.fm Seite 30 Freitag, 20. Juni 2008 9:07 09 Page 34 Page 36 Page 32 Page 33 Table des matires Montage du support Mise en place du tlphone portable Couplage du tlphone portable avec le support de tlphone portable Connexion du tlphone portable au support de tlphone portable Page 38 Page 38 Passage au mode mains libres Page 39 Cration du profil Vhicule Page 40 Instructions d'utilisation Page 41 gnrales Touches d'accs rapide Page 42 Dpose du tlphone portable Page 44 Dpose du support Page 44 Connexion manuelle Connexion automatique
- 30 -
Halter_Nokia_6500.fm Seite 31 Freitag, 20. Juni 2008 9:07 09 GRisque d'accident Lorsque vous tlphonez en conduisant, tenez compte des dispositions lgales du pays dans lequel vous vous trouvez. Si l'utilisation d'un tlphone pendant la marche est autorise par la loi, tlphonez uniquement lorsque les conditions de circulation le permettent. Sinon, votre attention risque d'tre dtourne de la circulation et vous risquez de provoquer un accident, de vous blesser et de blesser d'autres personnes. Pour des raisons de scurit, utilisez imprativement le dispositif mains libres pour tlphoner lorsque vous conduisez. Si vous tlphonez en utilisant le dispositif mains libres, restez attentif la conduite, fermez toutes les vitres et vitez tous les bruits qui pourraient vous gner. Arrtez ou stationnez le vhicule si vous souhaitez tlphoner sans utiliser le dispositif mains libres. Ne vous arrtez pas ou ne stationnez pas aux endroits o l'arrt ou le stationnement sont interdits. Procdez au montage et au couplage du module de tlphone uniquement lorsque le vhicule est l'arrt. Sinon, votre attention risque d'tre dtourne de la circulation et vous risquez de provoquer un accident.
- 31 -
Halter_Nokia_6500.fm Seite 32 Freitag, 20. Juni 2008 9:07 09 Montage du support 2 1 M+P-03F-7180 Engagez le support (1) sur la plaque de 1. contact (2) jusqu' ce qu'il s'enclenche de manire audible.
- 32 -
Halter_Nokia_6500.fm Seite 33 Freitag, 20. Juni 2008 9:07 09 Mise en place du tlphone portable L'utilisation du dispositif mains libres et des fonctions du tlphone via le systme de commande/l'ordinateur de bord n'est possible que si le tlphone portable se trouve dans son support et qu'une liaison Bluetooth est tablie. 4 1 8 3 def mno wxyz abc jkl tuv ghi pqrs
M+P-03F-7186 Enclenchez le tlphone portable (3) 1. Retirez le cache (8). 2. sur le support (1), comme indiqu sur l'illustration. Nota Veillez ce que le dispositif de verrouillage (4) s'enclenche correctement sur le tlphone portable (3). Sinon, il n'y a aucune connexion entre le tlphone portable et le support. Si ncessaire, remettez le tlphone portable en place dans le support.
- 33 -
Halter_Nokia_6500.fm Seite 34 Freitag, 20. Juni 2008 9:07 09 Tournez la cl en position 1, 2 ou 3 dans Couplage du tlphone portable avec le support de tlphone portable Pour que le couplage soit possible, le tlphone portable doit se trouver dans le vhicule, plac ou non sur le support. 1. le contacteur d'allumage (voir la notice d'utilisation du vhicule). 2. Slectionnez Menu Param. Connectivit Bluetooth Activ sur le tlphone portable (voir la notice d'utilisation du tlphone portable). Remarque (modles de la Classe C W/S 204) Pour le couplage, vous devez placer le tlphone dans le support. 6 7 M+P-03F-7187 3. Appuyez sur la touche Bluetooth (6) pendant environ 2 secondes. La diode (7) clignote rapidement. Le support de tlphone portable est alors visible pendant 2 minutes environ pour les autres appareils Bluetooth et peut ainsi tre dtect par le tlphone portable.
- 34 -
Halter_Nokia_6500.fm Seite 35 Freitag, 20. Juni 2008 9:07 09 4. Slectionnez Menu Param. Connectivit Bluetooth Chercher access. aud. sur le tlphone portable (voir la notice d'utilisation du tlphone portable). Le tlphone portable lance la recherche du support de tlphone portable. Lorsque le tlphone portable dtecte le support, le message MB N6500Cradle s'affiche sur le visuel du tlphone portable. Nota Il est recommand de rpondre la question Rendre le tlphone visible tous les quipements de recherche? par Non (voir la notice d'utilisation du tlphone portable). 5. Slectionnez MB N6500Cradle sur le tlphone portable. Un message vous demandant de saisir le code d'accs apparat sur le visuel du tlphone portable. Entrez le code d'accs 62872 sur le 6. tlphone portable, puis confirmez avec ok. 7. Validez le message Autoriser cet appareil se connecter automatiquement?
avec Oui pour permettre l'tablissement automatique d'une connexion entre le tlphone portable et le support. Nota Le nom d'appareil slectionn pour le support ne doit pas avoir t mmoris dans la mmoire du tlphone portable, sinon le message La connexion Bluetooth a chou Bluetooth s'affiche sur le tlphone portable. Si le nom d'un support existe dj dans la mmoire du tlphone portable, il faut le renommer ou l'effacer (voir la notice d'utilisation du tlphone portable).
- 35 -
Halter_Nokia_6500.fm Seite 36 Freitag, 20. Juni 2008 9:07 09 Une fois le code d'accs saisi et accept, le tlphone portable confirme l'tablissement de la connexion. La connexion entre le tlphone portable et le support est automatiquement interrompue si le tlphone portable coupler ne se trouve pas dans le support. 8. Vous pouvez maintenant utiliser le tlphone portable par l'intermdiaire du dispositif mains libres. Nota Vous pouvez coupler jusqu' 4 tlphones portables avec le support. Si un cinquime tlphone portable est coupl avec le support, le tlphone portable qui a t coupl en premier est effac de la mmoire. Connexion du tlphone portable au support de tlphone portable Une fois que le couplage est termin, la connexion entre le tlphone portable et le support est automatiquement tablie lorsque le tlphone portable est plac dans le support. La diode qui se trouve sur le support de tlphone portable s'allume en continu. Pour que le dispositif mains libres fonctionne correctement, le tlphone portable insr dans le support ne doit pas tre connect en mme temps l'interface Bluetooth du systme COMAND ou du systme audio (voir la notice d'utilisation du systme COMAND ou du systme audio). Placez le tlphone portable dans le support et tournez la cl en position 1, 2 ou 3 dans le contacteur d'allumage (voir la notice d'utilisation du vhicule). Nota Seul le tlphone portable plac dans le support est effectivement connect au support.
- 36 -
Halter_Nokia_6500.fm Seite 37 Freitag, 20. Juni 2008 9:07 09 Le tlphone portable doit se trouver dans le support pour que vous puissiez utiliser le dispositif mains libres. Si le support et le tlphone portable ne sont pas connects automatiquement, la connexion peut tre tablie manuellement
(voir page 38). La batterie du tlphone portable se charge quand la cl de contact est en position 1, 2 ou 3. Le systme COMAND ou le systme de commande/l'ordinateur de bord ne peut pas rendre toutes les sonneries. Lorsque la connexion entre le tlphone portable et le support est active, le nom de l'oprateur de tlphonie mobile s'affiche sur le systme de commande/l'ordinateur de bord si vous disposez d'une couverture rseau.
- 37 -
Halter_Nokia_6500.fm Seite 38 Freitag, 20. Juni 2008 9:07 09 Placez le tlphone portable dans le Connexion manuelle du tlphone portable au support de tlphone portable 1. support. 2. Appuyez sur la touche Bluetooth qui se trouve sur le support de tlphone portable. Autre possibilit:
Pour les vhicules de la Classe S, W/V 221, et de la Classe CL, C 216 Slectionnez Tl Tl Tlphone l'aide du slecteur COMAND (voir la notice d'utilisation du vhicule). Sur certaines sries Appuyez sur la touche (voir la notice d'utilisation du systme COMAND ou celle du systme audio). Nota Pour pouvoir tre connect manuellement, le tlphone portable doit tre coupl avec le support (voir page 34). Connexion automatiquement du tlphone portable au support de tlphone portable 1. Slectionnez Menu Param. Connectivit Bluetooth Equipements relis sur le tlphone portable (voir la notice d'utilisation du tlphone portable). 2. Slectionnez MB N6500Cradle sur le tlphone portable. 3. Slectionnez Options Param. Conn. aut. sans conf. sur le tlphone portable et confirmez avec Oui (voir la notice d'utilisation du tlphone portable).
- 38 -
Halter_Nokia_6500.fm Seite 39 Freitag, 20. Juni 2008 9:07 09 Passage au mode mains libres Pour que le dispositif mains libres fonctionne correctement, il faut que le tlphone portable soit insr sur le support, allum et qu'il passe automatiquement en mode mains libres. 3 M+P-03F-7188 Un symbole reprsentant un vhicule
(flche) apparat sur le visuel du tlphone portable. Si ce n'est pas le cas, retirez le tlphone portable (3) du support, puis remettez-le en place. Nota La connexion Bluetooth entre le tlphone portable et le support est automatiquement interrompue lorsque le tlphone portable est retir du support. Lorsque la connexion Bluetooth entre le tlphone portable et le support est interrompue automatiquement, la communication en cours peut tre poursuivie par l'intermdiaire du tlphone portable. Lorsque vous insrez le tlphone portable dans le support, la communication en cours est automatiquement transmise au dispositif mains libres. Le numro d'appel n'est pas affich dans le cas du systme COMAND et du systme audio.
- 39 -
Halter_Nokia_6500.fm Seite 40 Freitag, 20. Juni 2008 9:07 09 Cration du profil Vhicule Une fois que le tlphone portable et le support ont t coupls une premire fois et qu'une premire connexion a t tablie, le tlphone portable cre automatiquement un profil spcifique pour le mode mains libres. Le tlphone portable passe automatiquement sur ce mode lorsqu'il est plac dans le support (voir la notice d'utilisation du tlphone portable). Dans le profil propre au mode mains libre, vous pouvez dfinir la tonalit d'appel et son volume en fonction du vhicule. Nota Si Mode actuel est paramtr dans le profil pour le mode mains libres et que Silencieux est activ comme profil normal, aucune tonalit n'est audible mme lorsque le tlphone portable est plac dans le support. Si vous avez activ le profil Avion, aucune connexion ne sera tablie entre le support et le tlphone portable qui y est plac (voir la notice d'utilisation du tlphone portable). 1. Modification du profil : slectionnez par exemple Mon style 1 sous Menu Paramtres Accessoires Mains libres Mode par dfaut sur le tlphone portable. 2. Rglage du volume de la sonnerie:
rglez le volume sous Menu Param. Modes Mon style 1 Personnaliser Volume de la sonnerie sur le tlphone portable.
- 40 -
Halter_Nokia_6500.fm Seite 41 Freitag, 20. Juni 2008 9:07 09 Instructions d'utilisation gnrales Sur le modle Nokia 6500, il faut effectuer le rglage sous Param. Tlphone Mode rseau GSM. L'option Invite mode Avion ne doit pas tre active sur le tlphone portable, sinon aucune connexion ne pourra tre tablie entre le support et le tlphone portable qui s'y trouve (voir la notice d'utilisation du tlphone portable). Pour de plus amples informations sur l'utilisation du tlphone portable par le biais du volant multifonction, consultez la notice d'utilisation du systme COMAND, du systme audio ou du vhicule. Appuyez sur la touche ou la touche pour rgler le volume pendant la conversation. Lorsque le tlphone portable est plac sur le support, le transfert du numro d'appel est remplac par le paramtre Dfini par rseau (voir la notice d'utilisation du tlphone portable). Vous devez convenir du transfert du numro d'appel en mode mains libres auprs de votre oprateur ou pres-
tataire de services. Adressez-vous pour cela votre oprateur ou prestataire de services. Sur les vhicules les plus rcents, il est possible d'afficher les 30 derniers SMS sur le systme COMAND ou le systme audio. Le dossier de rception du tlphone portable ne doit pas contenir trop de SMS
(voir la notice d'utilisation du tlphone portable). Il est recommand d'teindre le tlphone portable au moins une fois par mois (voir la notice d'utilisation du tlphone portable).
- 41 -
Halter_Nokia_6500.fm Seite 42 Freitag, 20. Juni 2008 9:07 09 Touches d'accs rapide Touche d'accs rapide la bote vocale Il est possible d'attribuer la fonction de touche d'accs rapide la bote vocale la touche A. Attribution de fonction de la touche d'accs rapide 1. Appuyez sur la touche A du tlephone portable pendant 3 secondes environ. Le message Enregistrez dabord le numro de la bote aux lettres vocale apparat sur le visuel du tlphone portable, puis vous tes invit entrer le numro de tlphone de la bote vocale. 2. bote vocale sur le tlphone, puis confirmez. Appel de la touche d'accs rapide Appuyez sur la touche A du systme COMAND ou du systme audio pendant 3 secondes environ. Autres touches d'accs rapide
(numrotation abrge) Sur certaines sries, il est possible d'accder aux positions mmoire 2 9 de la carte SIM via les touches 2 9 du systme COMAND ou du systme audio. Entrez le numro de tlphone de la
- 42 -
Halter_Nokia_6500.fm Seite 43 Freitag, 20. Juni 2008 9:07 09 Nota Vous pouvez attribuer les positions mmoire 3 9 de la carte SIM selon vos souhaits. Sur le tlphone portable Nokia 6500, la position mmoire sur la carte SIM n'est pas affiche. Le numro de tlphone correspondant s'affiche lorsque vous appuyez sur les touches 2 9 sur le systme de commande. Si un numro de tlphone doit tre attribu la touche d'accs rapide 3, vous devez le composer sur le pav numrique du systme de commande et pouvez le renommer si ncessaire sur le tlphone portable (voir la notice d'utilisation du tlphone). Appel de la touche d'accs rapide Appuyez sur la touche correspondante du systme COMAND ou du systme audio pendant 3 secondes environ.
- 43 -
Halter_Nokia_6500.fm Seite 44 Freitag, 20. Juni 2008 9:07 09 Dpose du tlphone portable 4 3 1 d e f mno wxyz a b c jkl tuv ghi pqrs
M+P-03F-7189 Poussez le dispositif de 1. dverrouillage (4) vers le haut et retirez le tlphone portable (3) du support (1). Dpose du support de tlphone portable 1. Retirez le tlphone portable du support (voir ci-dessus). 5 1 M+P-03F-7184 2. Appuyez sur le bouton de dverrouillage (5), poussez le support (1) vers le bas et dgagez-le de sa fixation.
- 44 -
Halter_Nokia_6500.fm Seite 45 Freitag, 20. Juni 2008 9:07 09 2008, Mercedes-Benz Accessories GmbH Nachdruck, Vervielfltigung oder ber-
setzung, auch auszugsweise, nicht erlaubt. Mercedes-Benz Accessories GmbH, Stuttgart Ein Unternehmen der Daimler AG 06/08 03F007-08
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2008-08-05 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2008-08-05
|
||||
1 | Applicant's complete, legal business name |
Peiker acustic GmbH
|
||||
1 | FCC Registration Number (FRN) |
0009359555
|
||||
1 | Physical Address |
Max-Planck-Str. 28-32
|
||||
1 |
Friedrichsdorf, N/A 61381
|
|||||
1 |
Germany
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
B******@phoenix-testlab.de
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
QWY
|
||||
1 | Equipment Product Code |
CKIV-BT2
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
M******** O****
|
||||
1 | Title |
Mr.
|
||||
1 | Telephone Number |
0049 ******** Extension:
|
||||
1 | Fax Number |
0049 ********
|
||||
1 |
m******@valeo.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | CKIV iPhone, CKIV BB8300 Phone Cradle with Bluetooth | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Power listed is conducted. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
PHOENIX TESTLAB GmbH
|
||||
1 | Name |
H******** B********
|
||||
1 | Telephone Number |
49-52********
|
||||
1 | Fax Number |
49-52********
|
||||
1 |
o******@phoenix-testlab.de
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0019000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC