all | frequencies |
|
|
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|---|---|
manuals | photos | labels |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Datasheet | Users Manual | 401.44 KiB | ||||
1 |
|
UserMan | Users Manual | 1.31 MiB | ||||
1 |
|
Inpho | Internal Photos | 589.03 KiB | ||||
1 |
|
Expho | External Photos | 177.88 KiB | ||||
1 |
|
LabelLoc | ID Label/Location Info | 74.02 KiB | ||||
1 |
|
LabelSmpl | ID Label/Location Info | 33.42 KiB | ||||
1 |
|
ATTESTATION | Cover Letter(s) | 21.07 KiB | ||||
1 | BlkDia | Block Diagram | September 24 2014 | confidential | ||||
1 |
|
Confidentiality | Cover Letter(s) | 14.51 KiB | ||||
1 |
|
Declaration of authorization | Cover Letter(s) | 18.90 KiB | ||||
1 |
|
Doc | Cover Letter(s) | 14.29 KiB | ||||
1 | OPDes | Operational Description | September 24 2014 | confidential | ||||
1 | RF Exposure Info | |||||||
1 | Schem | Schematics | September 24 2014 | confidential | ||||
1 | Test Report | |||||||
1 | Test Setup Photos |
1 | Datasheet | Users Manual | 401.44 KiB |
Preliminary Datasheet AV6301 Wireless Audio Sender IC General Description The AV6301 / 6302 chipset is optimized for building wireless gaming headsets and point to multi-point audio distribution solutions such as rear speakers and subwoofers in home theater systems..The chipset is comprised of two ICs: AV6301 (sender) and AV6302 (client). These devices share the VMI RF Protocol and may be mixed and matched with other VMI chips (AAV6200, V6201, and AV6202). The AV6301 / 02 chipset achieves the goal of enabling a single core design to service multiple game platforms (PC or Console), External Digital Signal Processing (DSP) is also easily supported for all gaming platforms. The chip set provides all functions necessary to complete a bidirectional wireless audio link with high quality voice and music performance. Operation in the worldwide 2.4 GHz spectrum addresses the need for global application. System / Chipset Features
Stereo audio path: >93 dB SNR, 20 kHz BW
Mono voice path: >70 dB SNR, 6.5 kHz voice Sophisticated audio routing and mixing options to meet demands of multiple gaming headset platforms Over-the-air (OTA) serial interface: >2 kbps, bi-directional, full duplex Works within 3 inches of WIFI Client without impairment to Audio or WIFI throughput Advanced forward error correction coding, error detection, and audio-specific error concealment Diversity antenna support Low and Fixed Latency: <16 ms, Long Range: 15m (non-line-of-site) Auto search/sync/standby/wake-
up/shutdown
All Voltage Regulators on-chip
Interoperability with VMI (AV6201 / 02) Chipset is a highly transceiver and a AV6301 The AV6301 integrated, single-chip, wireless audio sender IC. It integrates the following: a complete 2.4 GHz RF transceiver, PHY & MAC, advanced power management hardware, audio DSP, USB 2.0 full complement of programmable digital interfaces to support a wide range of end-product user-interface requirements, including SPI and TWI interfaces. The device incorporates a complete USB 2.0 transceiver and enumerates as a USB Audio device as well as USB Human Interface Device (HID) without the need for external drivers, enabling true plug &
play. Additionally, the device makes available 3 independent I2S interfaces, allowing independent processing of non-USB audio sources. Simultaneous use of the USB and I2S ports is enhanced by additional audio processing capability, allowing for independent control and mixing of the different audio sources. AV6301 Features
Advanced Signal Routing Capability USB Port Enumerates as Audio and / or
Human interface device (HID)
Three available I2S ports
Simultaneous operation of USB and I2S ports
Expansive Digital I/O Capability
20 General Purpose Input / Output Pins
Master and Slave SPI and TWI interfaces
Pulse Width Modulated (PWM) I/O support Straightforward implementation of external EEPROM, DSP, Audio Codec and Host uC for advanced applications On-Chip One-Time-Programmable (OTP) Memory
Applications PC Game Wireless Headset Game Console Wireless Headset I2S based Wireless Audio Wireless Rear Speakers CONTENTS SUBJECT TO CHANGE WITHOUT NOTICE 1 AVNERA PROPRIETARY & CONFIDENTIAL | PROVIDED UNDER NDA Packaging The AV6301 is packaged in a 7 x 7 mm, 48 pin QFN and is rated for operation over the commercial temperature range (0 to 70 degrees C) CONTENTS SUBJECT TO CHANGE WITHOUT NOTICE 2 AVNERA PROPRIETARY & CONFIDENTIAL | PROVIDED UNDER NDA AV6301 Datasheet (Preliminary) revision 0.2 Revision History Revision Change Summary 0.1 0.2 Preliminary release of datasheet Add AV6xxx Selection Grid, Update Audio Routing, Block Diagram, Application Circuit, Pin Out and Pin Description. RF TX Electrical characteristics update. Update Selector Grid CORRECTION to I2S assignments to GPIO ports (stereo in, stereo out and mono out have all changed).I2S assignments reflected in Applications Diagram. Update of selection grid. 0.3 0.4 Release Date 10/7/11 10/27/11 11/4/11 11/15/11 CONTENTS SUBJECT TO CHANGE WITHOUT NOTICE 3 AVNERA PROPRIETARY & CONFIDENTIAL | PROVIDED UNDER NDA AV6301 Datasheet (Preliminary) revision 0.2 4 3 2 Table of Contents General Description.............................................................................................................................................................. 1 System / Chipset Features ................................................................................................................................................... 1 AV6301................................................................................................................................................................................. 1 AV6301 Features.................................................................................................................................................................. 1 Applications .......................................................................................................................................................................... 1 Packaging............................................................................................................................................................................. 2 Revision History.................................................................................................................................................................... 3 Table 0-1 AV6xxx Selection Grid.......................................................................................................................................... 6 1 REFERENCE DIAGRAMS.......................................................................................................................................... 7 1.1 Wireless Arbiter Solution Diagram.......................................................................................................................... 7 1.2 Functional Diagram ................................................................................................................................................ 8 1.3 Audio Signal Routing Diagram ............................................................................................................................... 8 1.4 Application Circuit Wireless Universal Gaming Arbiter ........................................................................................ 9 PIN INFORMATION .................................................................................................................................................. 10 2.1 Pin Diagram.......................................................................................................................................................... 10 2.2 Pin Description ..................................................................................................................................................... 11 ELECTRICAL SPECIFICATIONS ............................................................................................................................. 13 3.1 Absolute Maximum Ratings.................................................................................................................................. 13 3.2 DC Electrical Characteristics ................................................................................................................................ 14 3.3 Electrical Characteristics Voltage Supervisory Circuit ....................................................................................... 14 3.4 Electrical Characteristics RF Receiver .............................................................................................................. 15 3.5 Electrical Characteristics RF Transmitter .......................................................................................................... 15 3.6 Electrical Characteristics End-to-end Audio Characteristics.............................................................................. 15 PACKAGE INFORMATION....................................................................................................................................... 16 4.1 Package Outline Drawing..................................................................................................................................... 16 4.2 Package Marking.................................................................................................................................................. 17 CONTACT INFO & LEGAL DISCLAIMER................................................................................................................. 18 5 List of Tables Table 0-1 AV6xxx Selection Grid.......................................................................................................................................... 6 Table 2-2-1 AV301 pin description...................................................................................................................................... 11 Table 3-1 Absolute Maximum Ratings ................................................................................................................................ 13 Table 3-2 AV6301 DC Electrical Characteristics ................................................................................................................ 14 Table 3-3 AV6301 Electrical Characteristics - Voltage Supervisory ................................................................................... 14 Table 3-4 AV6301 Electrical Characteristics - RF Receiver................................................................................................ 15 Table 3-5 AV6301 Electrical Characteristics - RF Transmitter............................................................................................ 15 Table 3-6 AV6301 Electrical Characteristics - End-to-End Audio Characteristics............................................................... 15 List of Figures Figure 1-1 AV6301 Wireless Arbiter Solution ....................................................................................................................... 7 Figure 1-2 AV6301 Functional Diagram................................................................................................................................ 8 Figure 1-3 AV6301 Audio Routing ........................................................................................................................................ 8 Figure 1-4 AV6301 Application Circuit .................................................................................................................................. 9 Figure 2-1 AV6301 Pin Diagram......................................................................................................................................... 10 Figure 4-1 AV6301 48 Pin QFN Outline Drawing ............................................................................................................... 16 Figure 4-2 Package Marking Layout................................................................................................................................... 17 CONTENTS SUBJECT TO CHANGE WITHOUT NOTICE 4 AVNERA PROPRIETARY & CONFIDENTIAL | PROVIDED UNDER NDA AV6301 Datasheet (Preliminary) revision 0.2 CONTENTS SUBJECT TO CHANGE WITHOUT NOTICE 5 AVNERA PROPRIETARY & CONFIDENTIAL | PROVIDED UNDER NDA AV6301 Datasheet (Preliminary) revision 0.2 Table 0-1 AV6xxx Selection Grid Part Number AV6200 AV6201 AV6301 AV6200 AV6202 AV6302 Role I2S IN I2S Out USB Port MIC Amp Headphone Driver Amp Battery Charger General Purpose ADCs Button Support Rotary Encoder Support LED Support I2S Loop-
Back
(external DSP) MIC path input to I2S out MIC Side-
tone Mix Game / Chat Mix on TX Game / Chat Mix at RX Stereo N/A No No No No 0 Yes No Yes No Sender No No Audio /
HID No No Stereo Stereo Mono Audio /
HID No No No 0 Yes No Yes No No 0 Yes No Yes Yes N/A Stereo Receiver Mono Stereo No No No No 0 Yes No Yes No HID Yes Yes Yes 0 Yes Yes Yes No Mono Stereo Mono HID Yes Yes Yes 3 Yes Yes Yes No N/A N/A N/A N/A No Yes N/A N/A N/A N/A No N/A N/A Yes N/A N/A N/A No Yes N/A No Yes N/A Yes CONTENTS SUBJECT TO CHANGE WITHOUT NOTICE 6 AVNERA PROPRIETARY & CONFIDENTIAL | PROVIDED UNDER NDA AV6301 Datasheet (Preliminary) revision 0.2 1 REFERENCE DIAGRAMS 1.1 Wireless Arbiter Solution Diagram Figure 1-1 AV6301 Wireless Arbiter Solution CONTENTS SUBJECT TO CHANGE WITHOUT NOTICE 7 AVNERA PROPRIETARY & CONFIDENTIAL | PROVIDED UNDER NDA AV6301 Datasheet (Preliminary) 1.2 Functional Diagram revision 0.2 VDC V3P6 RFP RFN 3.6V LDO USB Spnd XTAL SUP VBG REF DIG Regs 3.3V REG RF/IF Transceiver MCU ROM RAM OTP GPIO 20 PHY Audio Proc USB Figure 1-2 AV6301 Functional Diagram GPIO DSCP,DSCN SPI, I2C GPIO (Buttons, LEDs) I2S DP DM 1.3 Audio Signal Routing Diagram Figure 1-3 AV6301 Audio Routing CONTENTS SUBJECT TO CHANGE WITHOUT NOTICE 8 AVNERA PROPRIETARY & CONFIDENTIAL | PROVIDED UNDER NDA AV6301 Datasheet (Preliminary) revision 0.2 1.4 Application Circuit Wireless Universal Gaming Arbiter Figure 1-4 AV6301 Application Circuit CONTENTS SUBJECT TO CHANGE WITHOUT NOTICE 9 AVNERA PROPRIETARY & CONFIDENTIAL | PROVIDED UNDER NDA AV6301 Datasheet (Preliminary) revision 0.2 2 PIN INFORMATION 2.1 Pin Diagram Figure 2-1 AV6301 Pin Diagram CONTENTS SUBJECT TO CHANGE WITHOUT NOTICE 10 AVNERA PROPRIETARY & CONFIDENTIAL | PROVIDED UNDER NDA AV6301 Datasheet (Preliminary) revision 0.2 2.2 Pin Description Table 2-2-1 AV301 pin description Pin No. 1 Symbol GPIO1 DSCN DPA-EN GPIO0 DSCP DSC XTALP XTALN VDDXO N/C IREF BGOUT VDDRXADC RFP RFN VDC V3P6 RESETN GPIO16 PWM2 GPIO15 I2S MONO OUT PWM1 GPIO14 I2S STEREO IN GPIO13 I2S STEREO OUT GPIO12 WCLK GPIO11 BCLK PWM1 VDDIO GPIO10 MCLK PWM0 GPIO9 M_MISO (SPI Mater) M_SCL (TWI Master) SCL (TWI) GPIO8 M_MOSI (SPI Master) M_SDA (TWI Master) SDA (TWI) GPIO7 M_SCLK (SPI Master) PWM1 GPIO6 M_SSB (SPI Master) PWM0 GPIO19 2 3 4 5 6,8,10-14, 16, 19, 20, 23 7 9 15 17 18 21 22 24 25 26 27 28 29 30 32 31 33 34 35 36 37 Pin Type Digital Output Digital Output Analog input Analog input Analog
-
Analog pin Analog bypass Bypass RF I/O RF I/O Supply pin Bypass Digital input Digital I/O Digital I/O Digital I/O Digital I/O Digital I/O Digital I/O Supply Digital I/O Digital I/O Digital I/O Digital I/O Digital I/O Digital I/O Description GPIO port 1; Usage is programmable to GPIO OR to Antenna Diversity Switch OR to Power Amplifier Enable GPIO port 0; Usage is programmable to GPIO OR to Antenna Diversity Switch + OR to Single Polarity Diversity Switch Control External crystal input External crystal input Crystal oscillator regulator bypass pin No connection Leave unconnected Do not Ground Reference current setting resistor connection Bandgap reference bypass pin Bypass pin for Receiver Data Converter Supply RF input/output positive RF input/output negative 5V input supply voltage from USB Bypass pin for 3.6V main regulator RESET signal; active low GPIO port 16, usage is programmable to GPIO OR to PWM resource #2 GPIO port 15, usage is programmable to GPIO OR to I2S port 2 MONO OUT Data PWM resource #1 GPIO port 14; usage is programmable to GPIO OR to I2S Port 1 STEREO IN Data GPIO port 13; usage is programmable to GPIO OR to I2S Port 0 STEREO OUT Data GPIO port 12; usage is programmable to GPIO OR to I2S Word Clock GPIO port 11; usage is programmable to GPIO OR to I2S Bit Clock OR to PWM resource #1 Supply bypass capacitor pin for digital I/O GPIO port 10; usage is programmable to GPIO OR to I2S Master Clock OR to PWM resource #0 GPIO port 9; usage is programmable to GPIO OR to M_MISO OR to M_SCL OR to SCL GPIO port 8; usage is programmable to GPIO OR to M-MOSI OR to M_SDA OR to SDA GPIO port 7; usage is programmable to GPIO OR to M_SCLK OR to PWM resource #1 GPIO port 6; usage is programmable to GPIO OR to M-SSB OR to PWM resource #0 GPIO port 19, usage is programmable to GPIO OR to CONTENTS SUBJECT TO CHANGE WITHOUT NOTICE 11 AVNERA PROPRIETARY & CONFIDENTIAL | PROVIDED UNDER NDA AV6301 Datasheet (Preliminary) revision 0.2 Pin No. 38 39 40 41 42 43 44 45 46 47 48 Symbol PWM2 VDDDIG VDD18 VDDIO DM DP GPIO18 PWM1 GPIO5 S_MISO (SPI Slave) S_SCL (TWI Slave) GPIO4 S_MOSI (SPI Slave) S_SDA (TWI Slave) GPIO3 S_SCLK (SPI Slave) UART_RX PWM1 GPIO2 S_SSB (SPI Slave) UART_TX PWM0 GPIO17 PWM2 Pin Type Bypass Bypass Bypass USB I/O USB I/O Digital I/O Digital I/O Digital I/O Digital I/O Digital I/O Description PWM resource #2 Bypass capacitor pin for 1.35V digital core regulator Bypass capacitor pin for 1.8V digital regulator (LDO) Bypass capacitor pin for 3.3V digital I/O regulator USB negative input USB positive input GPIO port 18, usage is programmable to GPIO OR to PWM resource #1 GPIO port 5; usage is programmable to GPIO OR to S_MISO OR to S_SCL GPIO port 4; usage is programmable to GPIO OR to S_MOSI OR to S_SDA GPIO port 3; usage is programmable to GPIO OR to S_SCLK OR to The UART Receiver OR to PWM resource #1 GPIO port 2; usage is programmable to GPIO OR to S_SSB OR to The UART Transmitter OR to PWM resource #0 GPIO port 17, usage is programmable to GPIO OR to PWM resource #2 CONTENTS SUBJECT TO CHANGE WITHOUT NOTICE 12 AVNERA PROPRIETARY & CONFIDENTIAL | PROVIDED UNDER NDA AV6301 Datasheet (Preliminary) revision 0.2 3 ELECTRICAL SPECIFICATIONS 3.1 Absolute Maximum Ratings The Absolute Maximum Rating (AMR) corresponds to the maximum value that can be applied without leading to instantaneous or very short-term unrecoverable hard failure (destructive breakdown). Absolute Maximum Ratings are stress ratings only. Permanent damage to the device may be caused by continuously operating at or beyond these limits. Device functional operating limits and guaranteed performance specifications are given under Electrical Characteristics at the test conditions specified. Table 3-1 Absolute Maximum Ratings CONDITION Supply (relative to AGND and DGND) Input Voltage Range Digital Inputs Input Voltage Range Analog Inputs Short circuit to GND (any pin) Operating Temperature Storage Temperature Lead Temperature (10s) Static Discharge Voltage HBM (All pins ) Static Discharge Voltage MM
-0.3
-0.3
-0.3
--
-40
-40
--
V V V C C C V V
+85
+100
+300 6.0 3.6 3.6 3000 300 continuous Units MAX VDC MIN Note:
1) HBM = ESD Human Body Model; C = 100pF, R = 1k 2) MM = ESD Machine Model; C = 100pF; R = 300 CONTENTS SUBJECT TO CHANGE WITHOUT NOTICE 13 AVNERA PROPRIETARY & CONFIDENTIAL | PROVIDED UNDER NDA AV6301 Datasheet (Preliminary) revision 0.2 MAX 5.5 MIN 4.4 3.2 DC Electrical Characteristics Operating Conditions: VDC = 4.4V to 5.5V, VDDIO = 3.3V, TA = 0C to +70 C; Typical specifications at TA = 25C, VDC = 5.0V. Table 3-2 AV6301 DC Electrical Characteristics PARAMETER VDC Supply Voltage Input V3P6 VDDIO (Digital 3.3V I/O) Reg. Voltage VDDDIG (Digital Core) Reg. Voltage VDD1P8 Supply Current (IVDC) USB chip GPIO Source Current CMOS I/O Logic Levels 3.3V I/O Input Voltage Logic Low, VIL Input Voltage Logic High, VIH Output Voltage Logic Low, VOL Output Voltage Logic High, VOH USB Interface DP Logic Output High CONDITIONS Internally regulated voltage Internally regulated voltage Internally regulated voltage Internally regulated voltage Reset USB Suspend Mode Arbiter Search Mode Arbiter Headset Link Mode VVDDIO = 3.3V VVDDIO = 3.3V VVDDIO = 3.3V ; ILOAD=1mA VVDDIO = 3.3V; ILOAD=1mA refer to USB spec; voltage relative to VDDIO TYP 5.0 3.6 3.3 1.35 1.8 TBD 1.0 TBD 55 4 0.8*VDD 2.9 2.0 0.8 0.4 TBD TBD TBD IO DM Logic Output Low refer to USB spec; voltage relative to VDDIO DP Logic Input High DM Logic Input Low USB Differential Input Sensitivity USB Differential Common Mode USB Single Ended RX Threshold USB IO Pin Static Output (Low) refer to USB spec; voltage relative to VDDIO refer to USB spec; voltage relative to VDDIO Rl=1.5k to 3.6V 0.2 0.8 0.8 0.2*VDD IO 0.7*VDD IO 0.3*VDD IO 2.5 2.0 0.3 3.3 Electrical Characteristics Voltage Supervisory Circuit Operating Conditions: VDC = 4.4V to 5.5V, VDDIO = 3.3V, TA = 0C to +70 C; Typical specifications at TA = 25C, VDC = 5.0V. Table 3-3 AV6301 Electrical Characteristics - Voltage Supervisory PARAMETER Voltage Monitor Low Thres. (assert reset) Voltage Monitor High Thres. (de-assert reset) Brownout bandwidth Reset Threshold (assert) Reset Threshold (de-assert) RESETN Minimum Time CONDITIONS Monitoring the voltage on V3P6 Monitoring the voltage on V3P6 Monitoring the voltage on V3P6 0.1uF external capacitor TYP 2.7 3.0 100 2.2 1.1 11 MIN MAX UNIT V V V V V mA mA mA mA V V V V V V V V V V V V UNIT V V kHz V V ms CONTENTS SUBJECT TO CHANGE WITHOUT NOTICE 14 AVNERA PROPRIETARY & CONFIDENTIAL | PROVIDED UNDER NDA AV6301 Datasheet (Preliminary) revision 0.2 3.4 Electrical Characteristics RF Receiver Operating Conditions: VDC = 4.4V to 5.5V, VDDIO = 3.3V, TA = 0C to +70 C; RF Channel Freq = 2403.35-2477.35MHz, measured at the single-ended input of the RF balun (with external impedance matching). Typical specifications at TA = 25C, VDC = 5.0V. Table 3-4 AV6301 Electrical Characteristics - RF Receiver PARAMETER RF Channel Frequency Range MIN 2402 TYP MAX 2478 2479.35 Modulated Signal Offset from LO Sensitivity (Note 1) Max input signal (desired signal) (Note 1) Input Blocker Level High Gain mode Out-of-band blocker level Spurious RF outputs CONDITIONS LO frequency (driving the mixers) RF carrier frequency TA=25C, LNA = High gain mode; max IF gain TA=25C, LNA = low gain mode; min IF gain
> 2MHz offset
<2400 MHz; >2483.5 MHz
<2400 MHz
>2483.5 MHz 2403.35 1.35
-89
-5
-45 TBD
-75
-75 Note 1: Sensitivity and max signal level are defined as the onset of 0.2% Block Error Rate. )BLER) 3.5 Electrical Characteristics RF Transmitter Operating Conditions: VDC = 4.4V to 5.5V, VDDIO = 3.3V, TA = 0C to +70 C; RF Channel Freq = 2403.35-2477.35MHz, measured at the single-ended input of the RF balun (with external impedance matching). Typical specifications at TA = 25C, VDC = 5.0V. Table 3-5 AV6301 Electrical Characteristics - RF Transmitter PARAMETER RF Channel Frequency Range MIN 2402 TYP MAX 2478 2479.35 2403.35 Modulated Signal Offset from LO Modulated Signal Bandwidth Output Power Output harmonics Out-of-band Spurious Output Output Noise Floor CONDITIONS LO frequency (driving the mixers) RF carrier frequency
-10dB point Pi/4 DQPSK modulated signal ACPR: Adj < -23dBc, Alt < -30dBc 2nd harmonic, Pout = 0dBm 3rd harmonic, Pout = 0dBm RF < 2390MHz, > 2483.5MHz, 1MHz RBW RF < 2390MHz, > 2483.5MHz, 1MHz RBW 1.35 1.8
+2
-52
-50
<-62
<-62 UNIT MHz MHz MHz dBm dBm dBm dBm dBm dBm UNIT MHz MHz MHz MHz dBm dBm dBm dBm dBm 3.6 Electrical Characteristics End-to-end Audio Characteristics Operating Conditions: VDC = 4.4V to 5.5V or VIN = 3.2V to 4.3V, VDDIO = 3.3V, TA = 0C to +70 C; Typical specifications at TA = 25C, VDC = 5.0V. Table 3-6 AV6301 Electrical Characteristics - End-to-End Audio Characteristics PARAMETER SNR Audio/Voice Bandwidth UNITS MAX MIN CONDITIONS Forward stereo path Reverse mono path End-to-end audio BW; 0.1dB point End-to-end audio BW; 0.1dB point AV6201 USB to AV6202 analog output AV6201 I2S to AV6202 I2S output AV6202 analog input to AV6201 USB output dB dB kHz kHz msec msec msec TYP 93 68 20 6.5
<16
<16
<16 Audio Latency Voice Latency CONTENTS SUBJECT TO CHANGE WITHOUT NOTICE 15 AVNERA PROPRIETARY & CONFIDENTIAL | PROVIDED UNDER NDA AV6301 Datasheet (Preliminary) revision 0.2 4 PACKAGE INFORMATION 4.1 Package Outline Drawing Figure 4-1 AV6301 48 Pin QFN Outline Drawing CONTENTS SUBJECT TO CHANGE WITHOUT NOTICE 16 AVNERA PROPRIETARY & CONFIDENTIAL | PROVIDED UNDER NDA AV6301 Datasheet (Preliminary) 4.2 Package Marking A V D D D D revision 0.2 C C Y Y W W X X L L L L L L T T A Figure 4-2 Package Marking Layout Abbreviations:
AVDDDD Product number (i.e. AV6301) CC YY WW XX LLLLLL TT A Country Code (i.e. MY for Malaysia) 2 digit year code 2 digit work week Production revision Silicon Lot number Wafer split (1 by default) Assembly Lot CONTENTS SUBJECT TO CHANGE WITHOUT NOTICE 17 AVNERA PROPRIETARY & CONFIDENTIAL | PROVIDED UNDER NDA AV6301 Datasheet (Preliminary) revision 0.2 5 CONTACT INFO & LEGAL DISCLAIMER Avnera Corporation 16505 Bethany Court, Suite 100 Beaverton, Oregon 97006 U.S.A. Main: +1.503.718.4100 Fax: +1.503.718.4101 www.avnera.com Avnera Corporation reserves the right to make changes without notice to the product to improve function, reliability, or performance. Avnera Corporation does not assume any liability arising from the application or use of the products or circuits described herein. CONTENTS SUBJECT TO CHANGE WITHOUT NOTICE 18 AVNERA PROPRIETARY & CONFIDENTIAL | PROVIDED UNDER NDA
1 | UserMan | Users Manual | 1.31 MiB |
Headset User ManUal ManUel dUtilisation dU casqUe-Micro AuriculAres MAnuAl Del usuArio WhAts in tHe box english heADset overview english 1. on/oFF/MUte bUtton: Press and hold to power on; repeat to power oFF. When on, the button will function as a Mute Button. click once to mute your microphone, and click again to unmute. 2. aUdio Mode bUtton: controls audio modes and manual lighting. 3. booM-less MicroPHone:
internal dual microphone design for chat communications. afterglow Fener wireless Headset afterglow wireless Usb transmitter Micro Usb Play
& charge cable optical cable 3.5mm aux cable User Manual heADset overview english Wireless usB trAnsMitter overview english 1. GaMe volUMe dial: Adjusts game 2. cHat volUMe dial: Adjusts chat volume level. volume level. 3. aFterGlow liGHtinG Mode switcH: choose between Manual lighting mode (set any color manually) or Auto lighting mode (which automat-
ically cycles through all colors). the third position turns off the lights while keeping your headset functions active. 4. Universal aUdio line-in: Plug the grey color 3.5mm auxiliary cable into this port and the other end into a sound source (mobile device, tablet, Pc). Microphone, sound and lighting capabilities are supported in Mobile mode. 5. Micro Usb cHarGinG Port: this port enables you to charge your Afterglow Wireless headset while in use. 1. diGital and analoG leds: these lights indicate whether your headset is using digital or analog sound input. 2. diGital aUdio Port: With the Wireless usB transmitter plugged into an active usB port, plug one end of the included optical cable in here, and the other end into your Playstation 4 or Playstation 3 console. the optical port has priority over the analog port. 3. analoG aUdio Port: With the Wireless usB transmitter plugged into an active usB port, plug one end of the grey 3.5mm aux cable into the analog audio port, and the other end into a mobile device or Pc auxiliary port. this can be used as a secondary input source. set uP: Playstation 4 english 1. Plug the Wireless usB transmitter into an active usB port on your Playstation 4 console. 2. Plug one end of the included optical cable into the optical audio port in the usB transmitter, and the other end in the optical audio port on the Playstation 4. 3. Press and hold the on/oFF button on your headset to power it on. the alternating leD colors of the ear cup will indicate the headset is searching for your usB transmitter. When the headset ear cup and usB transmitter leD turns a solid color, your headset and transmitter are paired and communicating properly. 4. to ensure your Afterglow Wireless headset will retrieve and control game and chat audio on separate channels: go to the Playstation 4 menu > sound and screen settings > Audio Output Settings > Output to Headphones > Select Chat Audio > Hit X to confirm.
(Headset will receive the game audio from the optical cable by default. Using this set up, you can control game and chat audio independently.) 5. Make sure your volume is turned up. if you want to further increase the volume, you can do so in the Playstation 4 menu: go to the Playstation 4 menu > settings > Devices > Audio Devices > Volume control 6. You can adjust your microphone input levels on the console menu: go to Playstation 4 menu >settings > Devices > Audio Devices > Microphone level
** to mute your microphone, press the Mute button located on your left ear cup. You will be alerted that your microphone is muted by a voice prompt. set uP: Playstation 3 english set uP: Pc / Mac english 1. Plug the Wireless usB transmitter into an active usB port on your Playstation 3 console. 2. Plug one end of the included optical cable into the optical audio port on the usB transmitter, and the other end in the optical audio port on the Playstation 3 console. 3. Press and hold the on/oFF button on your headset to power it on. the alternating leD colors of the ear cup will indicate the headset is searching for your usB transmitter. When the headset ear cup and usB transmitter leD turns a solid color, your headset and transmitter are paired and communicating properly. 4. For use with analog sources, plug one end of the included 3.5mm into the analog audio port in the transmitter, and the other end into your tV, cable box or MP3 player. 5. Make sure your headset is recognized by your Playstation 3 by checking your consoles sound settings. 6. Adjust the microphone levels in the consoles sound menu. 1. Plug the wireless usB transmitter into an active usB port on your Pc. 2. Plug one end of the grey 3.5mm cable into an aux port in your Pc, and the other end into the 3.5mm analog port in your usB transmitter.
*if your Pc has an optical output, you may connect your usB transmitter using the included optical cable instead of the 3.5mm cable. 3. Press and hold the on/oFF button on your headset to power on. the alternating leD colors on the ear cup indicate the headset is searching for your usB transmitter. When the ear cup and transmitter leD turns a solid blue, your headset and transmitter are communicating.
** An alternative connection with your Pc is putting the headset into mobile mode. Follow the mobile connection steps for this set up. note: Microphone function will be supported on Pcs with a single headset jack for audio and microphone. if you have separate inputs for audio and microphone on your Pc, you will need to connect through an apapter. (sold on online retailers) 4. Make sure the Afterglow Wireless headset is chosen as an audio output device on your Pc:
right click the small speaker icon in the bottom tool bar > select Volume options > select Afterglow Wireless headset under sound Devices. You can further adjust the volume on your headset through your Pc through your audio settings indicated by a small speaker. set uP: Mobile devices english 1. To enable Afterglow lighting effects while in mobile mode, first make sure your USB trans-
mitter is not plugged in and powered. 2. Press and hold the power button on your headset. You will see the ear cup lights alternat-
ing, indicating that the headset is searching for a transmitter. 3. Press and hold the mode button for 10 seconds until you hear a beep and ear cup led color turns solid .Your headset is now in mobile mode. Your boom-less microphone and your lighting mode switch will function the same as in default gaming mode. 4. Plug the grey 3.5mm cable and plug one end into the Afterglow Wirelessheadset and the other into the audio output in your mobile device. the microphone capability will be enabled for phone calls. 5. in this mode, the volume can be adjusted on your mobile device only.
*note: Your headsets lighting effects can be adjusted while in mobile mode by moving the lighting switch between modes. in order to bring your Afterglow Wireless headset out of mobile mode, hold down the Power button for 3 seconds to turn the headset off. When you power the headset on again, your headset will be out of mobile mode. You will notice the alternating lights, indicating your headset is searching for a usB transmitter. note: Your headset will stay in search mode for two minutes. if within two minutes your headset is not paired with its transmitter or put into mobile mode, it will go to sleep. AuDio Modes english aUdio Modes are cUstoMized soUnd ProFiles to cater to diFFerent PreFerences. tHey are indicated by tHe voice cUes tHat are activated UPon PressinG tHe Mode bUtton. PUre aUdio: Pure audio offers a well-balanced audio experience that focus on directionality and enables you to hear the game exactly as the game developers intended with no excessive use of digital signal processing. bass boost: For those who prefer the extra kick on the low end, this mode boosts the low end audio frequencies and provides further immersion without sacrificing the mids and highs for an undistorted, clean audio. lighting Modes english tHe aFterGlow wireless Headset inclUdes tHree liGHtinG Modes:
ManUal liGHtinG: in this mode, the Afterglow lights will be set to blue by default. You can transition the colors by pressing and holding the mode button. upon release the ear cup leD will set at the desired color. the Afterglow Wireless headset is programmed to remember your headsets chosen color. the next time you turn on your Afterglow Wireless headset, the ear cups will be the color you had previously chosen. m aUtoMatic liGHtinG: the Afterglow Wireless headsets also has the capability of cycling through all colors of the spectrum while in use. Move the switch on the left ear cup to the light bulb icon with an A. the ear cups will continue to cycle through the prismatic colors during use. a liGHtinG oFF: to turn off your ear cup lighting, simply move the switch to the crossed light bulb icon. *note: in this mode, the headset functions will operate normally. BAtterY & cHarGinG english yoUr aFterGlow Headset is enGineered to Provide GaMers UP to 10 HoUrs oF battery liFe on a sinGle cHarGe. For UninterrUPted GaMinG, yoU May cHarGe yoUr Headset wHile it is in Use. low battery indicator:
Your Afterglow Headset will alert you with a voice cue when the battery life is low. When your headset has about 10 minutes of power left, your headsets LED ear cup lights will shut off, but you will still be able to hear your game and chat audio. For a full battery charge, your headset will need few hours to charge. You may continue using your headset while charging by connecting the Play & charge cable to your headset and an active usB port. cHarGinG indicator:
When charging, the ear cup lights will pulsate, which indicates your headset is charging. When your headset is fully charged, the ear cup lights will go back to your set lighting color. trouBleshooting english i cannot hear game audio make sure The wireless USB transmitter is connected to a USB port on your PlayStation 4 or 3 and the system is on. Your headset is turned on and paired with the wireless USB transmitter. This is indicat-
ed by a solid leD on the wireless usB transmitter and the headset ear cups. Your game volume is turned up. Your optical cable is plugged in to the console and to the transmitter. Under the Sound and Screen menu, Optical is selected as your primary audio output. i cannot hear others make sure Your chat volume dial is turned up. You have enabled chat audio in your PlayStation 4 sound settings. others cannot hear me make sure Your headset is ON and paired with your wireless USB transmitter. This is indicated by a solid blue leD on the headsets ear cup and the wireless usB transmitters light. Your mic is not muted. Click the MUTE button on the left ear cup to mute and unmute yourself. **note: When you mute your microphone, a voice cue will tell you comms disabled On a PC, make sure your headset is selected as a microphone input by right clicking the speaker icon in your bottom tool bar > recording Devices > select headset microphone. My headset and wireless Usb transmitter are not paired make sure Your headset is not in mobile mode. To take your headset out of mobile mode, turn your headset off by holding down the power button for 3 seconds until you hear a beep. When you turn your headset back on, it will not be in mobile mode. To re-pair the headset with a transmitter: Power the transmitter and wait until you see a slow blinking blue leD. locate the small pinhole button on the side of the trans-
mitter; press with a thin object until you see the blue leD start blinking rapidly. then while oFF, press and hold the PoWer button on your headset for 10 seconds while ear cup leDs alternate. When both the headset and transmitter lights turn solid color, the wireless pairing is re-established. i cannot adjust game & chat volume separately make sure The console is obtaining the game audio from the optical out. Confirm this at the audio output settings Primary Audio output: Digital out (optical) Under sound settings chat audio is selected (this will ensure only chat channel is directed to the usB port) contenu De lA bote FrAnAis PrsentAtion Du casqUe-Micro FrAnAis 1. boUton MarcHe/arrt/
soUrdine: Maintenez le bouton appuy pour mettre sous tension;
appuyez nouveau pour mettre hors tension. lorsquil est allum, il fonctionne comme Bouton De sourDine. cliquez une fois pour mettre le microphone en sourdine. cliquez une nouvelle fois pour ds-
activer la sourdine. 2. boUton des Modes aUdio:
contrle les modes audio ainsi que les modes dclairage. 3. MicroPHone tecHnoloGie antirsonance: Design double microphone interne pour communiquer en jeu. Casque-micro sans fil afterglow FenerMc metteur Usb sans Fil afterglow cble Micro Usb Play & charge cble optique cble auxiliaire de 3,5 mm Manuel dutilisation PrsentAtion Du casqUe-Micro FrAnAis APeru De lMetteur usB sans Fil FrAnAis 1. Molette de volUMe de JeU:
rgle le niveau de volume de jeu. 2. Molette de volUMe de cHat:
rgle le niveau de volume de chat. 3. interrUPteUr de Mode dclairaGe aFterGlow:
choisissez entre le mode manuel
(choisissez une couleur) ou le mode auto (qui alterne automatiquement entre toutes les couleurs). la troisime position teint les lumires tout en conservant les fonctions du casque-micro actives. 4. entre aUdio Universelle:
Branchez le cble auxiliaire gris de 3,5 mm sur ce port et lautre fiche sur la source sonore (priphrique mobile, tablette, Pc). les fonctionnalits de son et dclairage du microphone sont prises en charge par le mode mobile. 5. Port de cHarGeMent Micro Usb: ce port vous permet de charger votre casque-micro sans fil Afterglow tout en lutilisant. 1. del nUMriqUe et analoGiqUe:
ces tmoins indiquent si votre casque-micro utilise une entre numrique ou analogique. 2. Port aUdio nUMriqUe: en ayant lmetteur USB sans fil de branch dans un port usB actif, branchez lextrmit du cble optique inclus ici et lautre dans votre console Playstation 4 ou Playstation 3. le port optique a priorit sur le port analogique. 3. Port aUdio analoGiqUe: en ayant lmetteur USB sans fil de branch dans un port usB actif, branchez lextrmit du cble auxiliaire de 3,5 mm dans le port audio analogique et lautre dans votre priphrique mobile ou le port auxiliaire du Pc. ceci peut tre utilis titre de source dentre secondaire. instAllAtion: Playstation 4 FrAnAis 1. Branchez lmetteur USB sans fil sur un port USB actif de votre console PlayStation 4. 2. Branchez lune des extrmits du cble optique inclus dans le port audio optique de lmetteur usB et lautre extrmit dans le port audio optique de la console Playstation 4. 3. Pour mettre sous tension, maintenez le bouton Marche/Arrt de votre casque-micro enfonc. Si les couleurs de la DEL alternent sur loreillette, ceci signifie que le casque-micro est la recherche de votre metteur usB. lorsque les Del de loreillette du casque-micro et de lmetteur USB restent allumes, ceci signifie que votre casque-micro et lmetteur sont en communication. 4. Pour garantir que votre casque-micro Afterglow sans fil sera capable de rcuprer et de contrler laudio du jeu et du chat sur des canaux spars: rendez-vous sur le menu Playstation 4 > Paramtres son et cran > Paramtres de sortie audio > sortie vers le casque > Slectionnez Audio du Chat > Cliquez sur X pour confirmer
(Le casque-micro recevra laudio du jeu partir du cble audio par dfaut. En utilisant cette configuration, vous pourrez contrler indpendamment laudio du jeu et du chat.) 5. Assurez-vous que le volume est suffisamment lev. Si vous dsirez augmenter le volume, vous pouvez le faire partir du menu de la Playstation 4: Allez sur le menu de la Playstation 4 > Paramtres > Priphriques > Priphriques audio > niveau du microphone 6. Vous pouvez ajuster vos niveaux dentre du microphone dans le menu de la console: Allez sur le menu de la Playstation 4 > Paramtres > Priphriques > Priphriques audio >
niveau du microphone
** Appuyez sur le bouton de sourDine situ sur loreillette de gauche de votre casque-micro pour mettre votre micro en sourdine. Vous serez avis par un message vocal que votre microphone est en sourdine. instAllAtion: Playstation 3 FrAnAis 1. Branchez lmetteur USB sans fil sur un port USB actif de votre console PlayStation 3. 2. Branchez lune des extrmits du cble optique inclus dans le port audio optique de lmet-
teur usB et lautre extrmit dans le port audio optique de la console Playstation 3. 3. Pour mettre sous tension, maintenez le bouton Marche/Arrt de votre casque-micro enfon-
c. Si les couleurs de la DEL alternent sur loreillette, ceci signifie que le casque-micro est la recherche de votre metteur usB. lorsque les Del de loreillette du casque-micro et de lmetteur USB restent allumes, ceci signifie que votre casque-micro et lmetteur sont en communication. 4. Pour une utilisation avec des sources analogiques, branchez lune des extrmits du cble inclus de 3,5 mm dans le port audio analogique de lmetteur, et lautre extrmit dans votre tlviseur, votre rcepteur ou votre lecteur MP3. 5. Assurez-vous que votre casque-micro est reconnu par votre console Playstation 3 en vrifiant les paramtres audio de votre console. 6. Ajustez les niveaux du microphone dans le menu audio de la console. instAllAtion: Pc / Mac FrAnAis 1. Branchez lmetteur USB sans fil sur un port USB actif de votre PC. 2. Branchez lune des extrmits du cble gris de 3,5 mm dans un port auxiliaire de votre Pc et lautre extrmit dans un port analogique de 3,5 mm de votre metteur usB.
*si votre Pc possde une sortie optique, vous pouvez connecter lmetteur usB en utilisant le cble optique inclus au lieu du cble de 3,5 mm. 3. Pour mettre sous tension, maintenez le bouton Marche/Arrt de votre casque-micro enfonc. Si les couleurs de la DEL alternent sur loreillette, ceci signifie que le casque-micro est la recherche de votre metteur usB. lorsque les Del de loreillette et de lmetteur restent allumes en bleu, ceci signifie que votre casque-micro et lmetteur sont en communication.
** une connexion alternative avec votre Pc mettra votre casque-micro en mode mobile. suivez les tapes de connexion mobile pour cette configuration.reMarqUe: la fonction du microphone sera prise en charge sur les Pc avec une seule prise pour laudio et pour le microphone. si vous disposez dentres distinctes pour laudio et le microphone sur votre Pc, vous devrez vous connecter laide dun adaptateur. (Vendu en ligne) 4. Assurez-vous que le casque-micro Afterglow sans fil est choisi comme priphrique de sortie audio sur votre Pc: cliquez avec le bouton droit sur la petite icne haut-parleur de la barre doutils infrieure > slectionnez options de volume > slectionnez Afterglow Wireless headset sous Priphriques audio . Vous pouvez rgler le volume de votre casque-micro plus prcisment via les rglages audio de votre Pc indiqus par un petit haut-parleur. instAllAtion: PriPHriqUes Mobiles FrAnAis 1. Pour activer les effets dclairage Afterglow en mode mobile, assurez-vous dabord que votre metteur usB nest pas branch, ni aliment. 2. Maintenez le bouton dalimentation de votre casque-micro appuy. Vous verrez les lumires des oreillettes sallument en alternance indiquant que le casque-micro recherche un metteur. 3. Appuyez sur le bouton mode et tenez-le enfonc pendant 10 secondes jusqu ce que vous entendiez un signal sonore et que la lumire de loreillette demeure allume. Votre casque-micro est maintenant en mode mobile. Votre microphone technologie antirso-
nance et votre interrupteur de mode dclairage fonctionneront de la mme faon en mode de jeu par dfaut. 4. Branchez une extrmit du cble gris de 3,5 mm sur le casque-micro Afterglow sans fil et lautre extrmit sur la sortie audio de votre priphrique mobile. la capacit du micro-
phone sera active pour les appels tlphoniques. 5. Dans ce mode, le volume pourra tre ajust sur votre appareil mobile uniquement.
*reMarqUe: les effets dclairage de votre casque-micro peuvent tre ajusts en mode mobile en dplaant linterrupteur dclairage entre les modes. Afin de sortir votre casque-micro Afterglow Wireless headset du mode mobile, tenez enfonc le bouton dalimentation pendant 3 secondes pour teindre votre casque-micro. lorsque vous allumerez le casque-micro nouveau, celui-ci ne sera plus en mode mobile. Vous remarquerez que les lumires clignotent en alternance, indiquant que votre casque-micro recherche un metteur usB. reMarqUe: Votre casque-micro demeurera en mode recherche pendant deux minutes. Votre casque-micro steindra sil nest pas jumel avec son metteur en dedans de deux minutes ou mis en mode mobile. MoDes aUdio FrAnAis les Modes aUdio sont des ProFils aUdio Personnaliss rPondant diFFrentes PrFrences. ils sont indiqUs Par des MessaGes vocaUx qUi sont activs lorsqUe le boUton de Mode est enFonc. aUdio PUr: laudio pur offre une exprience audio bien quilibre et tendue qui vous permet dentendre le son du jeu exactement comme il a t conu par les dveloppeurs, sans utiliser avec exagration du traitement numrique du signal. aMPliFication des Graves: Pour ceux qui prfrent un peu plus de basses, ce mode donne un plus de profondeur aux basses frquences et aux grondements sans compromettre laudio pur et sans distorsion. MoDes dclairaGe FrAnAis le casqUe aFterGlow sans Fil ProPose trois Modes dclairaGe:
clairaGe ManUel: Dans ce mode, les lumires Afterglow seront bleues par dfaut. Vous pouvez changer de couleur en appuyant et en maintenant le bouton de mode enfonc. lorsque vous le relcherez, la Del de loreillette demeurera avec la couleur dsire. Le casque-micro Afterglow sans fil est programm pour se rappeler de la couleur que vous avez choisie. La prochaine fois que vous allumerez votre casque-micro Afterglow sans fil, les oreillettes seront de la couleur choisie prcdemment. m clairaGe aUtoMatiqUe: Les casques-micro Afterglow sans fil ont galement la capacit de passer travers lensemble des couleurs lorsquils sont en utilisation. Dplacez linterrupteur de loreillette de gauche vers licne de lampoule avec un A. les oreillettes continueront de passer travers lensemble des couleurs durant lutilisation. a clairaGe teint: Pour teindre lclairage des oreillettes, dplacez simplement linterrupteur sur licne de lampoule barre. *reMarqUe: Dans ce mode, les fonctions du casque-micro fonctionneront normalement. BAtterie et cHarGeMent FrAnAis DPAnnAge FrAnAis Une seUle cHarGe de la batterie de votre casqUe-Micro aFterGlow PerMet de JoUer JUsqU 10 HeUres. PoUr JoUer sans interrUPtion, voUs PoUvez cHarGer votre casqUe-Micro alors qUil est en Utilisation. indicateUr de batterie Faible :
Votre casque-micro Afterglow mettra un signal sonore lorsque le niveau de la batterie sera faible. Lorsquil ne restera plus que 10 minutes dalimentation, la DEL sur loreillette de votre casque-micro steindra, mais vous pourrez toujours entendre laudio de votre jeu et des discussions. Votre casque-micro peut charger compltement la batterie en 2,5 heures. Vous pouvez continuer utiliser votre casque-micro durant la charge en connectant le cble Play &
charge votre casque-micro et un port usB actif. indicateUr de cHarGeMent Lors du chargement, les voyants de loreillette clignotent, ce qui indique que votre Une fois votre casque-micro entirement charg, les lumires des oreillettes retourneront casque-micro est en chargement. la couleur slectionne. DPAnnAge FrAnAis Je nentends pas laudio du jeu assurez-vous que... Lmetteur USB sans fil est connect au port USB de votre systme PlayStation 4 ou 3 et que votre systme est allum. Votre casque-micro est allum et coupl avec votre metteur USB. Ceci est indiqu par une DEL qui demeure allume sur lmetteur USB sans fil et sur les oreillettes du casque-micro. Le volume de votre jeu est suffisamment lev. Votre cble optique est branch dans la console et sur lmetteur. Dans le menu Paramtres Son et cran , Optique est slectionn comme tant votre sortie audio principale. Je nentends pas les autres assurez-vous que... Votre volume de chat est suffisamment lev. Vous avez activ les paramtres audio Audio du chat de votre PlayStation 4. les autres ne peuvent pas mentendre assurez-vous que... Votre casque-micro est ALLUM et coupl avec votre metteur USB sans fil. Le couplage est indiqu par une Del bleue allume sur loreillette du casque-micro ainsi que sur lmetteur USB sans fil. Votre micro nest pas en sourdine. Cliquez sur le bouton de SOURDINE se trouvant sur loreillette gauche. **reMarqUe: Quand vous mettez votre microphone en sourdine, un signal vocal indiquera communication dsactive Votre casque-micro est slectionn comme entre de micro sur votre PC. Pour ce faire, cliquez avec le bouton droit sur licne haut-parleur de la barre doutils >
Priphriques denregistrement > slectionnez Microphone sur casque. Mon casque-micro et mon metteur sans fil ne sont pas coupls assurez-vous que... Votre casque-micro nest pas en mode mobile. Pour sortir votre casque-micro du mode mobile, teignez votre casque-micro en appuyant et en maintenant le bouton dalimentation enfonc pendant 3 secondes jusqu ce que vous entendiez un signal sonore. lorsque vous allumerez nouveau votre casque-micro, celui-ci ne sera plus en mode mobile. Pour jumeler nouveau le casque-micro avec un metteur : Allumez lmetteur et attendez jusqu ce que vous voyez une Del bleue clignoter. trouvez le petit bouton sur le ct de lmetteur; appuyez sur un objet mince jusqu ce que vous voyez la Del bleue se mettre clignoter rapidement. lorsquil est teint, appuyez et tenez enfonc le bouton dalimentation de votre casque-micro pendant 10 secondes pendant que les DEL des oreillettes sallument en alternance. Le jumelage sans fil est tabli de nouveau lorsque les lumires du casque-micro et de lmetteur demeurent allumes. Je ne suis pas en mesure dajuster sparment le volume du jeu et du chat as-
surez-vous que... La console obtient laudio du jeu partir de la sortie optique. Confirmez ceci dans les paramtres de sortie audio sortie audio principale : sortie numrique (optique) Chat audio est slectionn dans les paramtres audio (ceci permettra de sassurer que seul le canal de chat est dirig vers le port usB) conteniDo De lA caJa esPAol DescriPcin generAl Del aUricUlar esPAol 1. botn de encendido/aPa-
Gado/silencio: Mantngalo presionado para encender y repita la accin para apagar. cuando se encuentra encendido, el botn funcionar como Botn De silencio. haga clic una vez para silenciar el micrfono y haga clic de nuevo para restaurar el sonido. 2. botn de Modo aUdio:
controla los modos de audio y la iluminacin manual. 3. MicrFono sin cabezal:
Diseo de micrfono dual interno para chateo durante las comunicaciones. auricular inalmbrico afterglow Fener transmisor Usb inalmbrico afterglow cable Play &
charge Micro Usb cable ptico cable auxiliar de 3,5 mm Manual del Usuario DescriPcin generAl Del aUricUlar esPAol DescriPcin generAl Del trAnsMisor usB inalMbrico esPAol 1. dial de volUMen de JUeGo:
Ajusta el nivel de volumen de juego. 2. dial de volUMen del cHat:
Ajusta el nivel de volumen del chat. 3. interrUPtor de Modo de ilUMinacin aFterGlow: elija entre modo de iluminacin Manual
(establece cualquier color manualmente) o modo de iluminacin Automtico (que cambia automtica-
mente todos los colores). la tercera posicin apaga las luces mientras mantiene activas las funciones del auricular. 4. PUerto de entrada Universal de 3,5 MM: conecte el cable auxiliar de color gris de 3,5 mm a este puerto y conecte el otro extremo a una fuente de sonido (dispositivo mvil, tablet, Pc). las capacidades del micrfono, el sonido y la iluminacin son compatibles en el modo Mvil. 5. PUerto de aliMentacin Micro Usb: este puerto le permite cargar su auricular Afterglow inalmbrico mientras se encuentra en uso. 1. leds diGitales y analGicos:
estas luces indican si su auricular est usando una entrada de sonido digital o analgica. 2. PUerto de aUdio diGital: con el transmisor de usB inalmbrico conectado a un puerto usB activo, conecte el extremo del cable ptico incluido aqu y el otro extremo en su consola Playstation 4 o Playstation 3. el puerto ptico tiene prioridad sobre el puerto analgico. 3. PUerto de aUdio analGico:
con el transmisor usB inalmbrico conectado a un puerto usB activo, conecte el extremo del cable auxiliar gris de 3,5 mm en el puerto de audio analgico y el otro extremo en un dispositivo mvil o puerto auxiliar de Pc. este se puede utilizar como fuente de entrada secundaria. conFigurAcin: Playstation 4 esPAol 1. conecte el transmisor usB inalmbrico a un puerto usB activo de la consola Playstation 4. 2. conecte un extremo del cable ptico incluido en el puerto de audio ptico en el transmisor usB y el otro extremo en el puerto de audio ptico de la Playstation 4. 3. Mantenga presionado el botn de encenDiDo/APAgADo del auricular para encenderlo. los colores alternos del leD de las orejeras de los auriculares indicarn que el auricular est buscando su transmisor usB. cuando el leD de las orejeras del auricular y del transmisor USB se vuelve una luz de color fija, el auricular y el transmisor estn conectados y se estarn comunicando correctamente. 4. Para garantiza que su auricular inalmbrico Afterglow reproduzca y controle el audio del juego y del chat por canales separados: Vaya al men Playstation 4 > Ajustes de sonido y pantalla > Ajustes de salida de audio > salida a auriculares > seleccione Audio del chat >
Pulse X para confirmar.
(El auricular recibir el audio del juego desde el cable ptico de manera predeterminada. Utilizando esta configuracin, puede controlar el audio del juego y del chat de manera independiente.) 5. Asegrese de que el volumen est encendido. si desea aumentar ms el volumen, puede hacerlo en el men Playstation 4: Vaya al men Playstation 4 > Ajustes > Dispositivos >
Dispositivos de audio > control de volumen 6. Puede ajustar los niveles de entrada del micrfono en el men de la consola. Vaya al men Playstation 4 > Ajustes > Dispositivos > Dispositivos de audio > nivel de micrfono
**Para silenciar el micrfono, presione el botn silenciAr que se encuentra en la orejera izquierda. una indicacin de voz le alertar que su micrfono est silenciado. conFigurAcin: Playstation 3 esPAol 1. conecte el transmisor usB inalmbrico a un puerto usB activo de la consola Playstation 3. 2. conecte un extremo del cable ptico incluido en el puerto de audio ptico en el transmisor usB y el otro extremo en el puerto de audio ptico de la consola Playstation 3. conFigurAcin: Para coMPUtadora/Mac esPAol 1. conecte el transmisor usB inalmbrico a un puerto usB activo de la computadora. 2. conecte un extremo del cable gris de 3,5 mm en un puerto auxiliar de su computadora y el otro extremo al puerto analgico de 3,5 mm en su transmisor usB. 3. Mantenga presionado el botn de encenDiDo/APAgADo del auricular para encenderlo.
*si su computadora tiene una salida ptica, es posible que conecte el transmisor usB utilizando el cable ptico incluido en lugar del cable de 3,5 mm. 3. Mantenga presionado el botn de encenDiDo/APAgADo del auricular para encenderlo. los colores alternos del leD de las orejeras indican que el auricular est buscando su transmisor USB. Cuando el LED de las orejeras y el transmisor se vuelve una luz azul fija, el auricular y el transmisor se estarn comunicando. los colores alternos del leD de las orejeras de los auriculares indicarn que el auricular est buscando su transmisor usB. cuando el leD de las orejeras del auricular y del trans-
misor USB se vuelve una luz de color fija, el auricular y el transmisor estn conectados y se estarn comunicando correctamente. 4. Para el uso con fuentes analgicas, conecte un extremo del cable incluido de 3,5 mm al puerto de audio analgico en el trasmisor y el otro extremo a su televisor, caja de cables o reproductor MP3. 5. Asegrese de que el auricular sea reconocido por su Playstation 3 revisando la configura-
cin de audio de la consola. 6. Ajuste los niveles del micrfono en el men de sonido de la consola.
** una conexin alternativa con su computadora es colocar el auricular en modo mvil. siga los pasos de conexin mvil para esta configuracin. nota: la funcin del micrfono ser admitida en computadoras con un conector para auricular nico para audio y micrfono. si tiene entradas separadas para el audio y el micrfono en su computadora, deber realizar la conexin a travs de un adaptador. (se vende en los minoristas en lnea) 4. Asegrese de que el auricular inalmbrico Afterglow est elegido como dispositivo de salida de audio en su computadora: haga clic con el botn derecho en el cono del altavoz pequeo de la barra de herramientas inferior > seleccione opciones de volumen > seleccione Auricular inalmbrico Afterglow en Dispositivos de sonido. Puede ajustar ms el volumen del auricular por medio de la computadora en los ajustes de audio sealados con un altavoz pequeo. conFigurAcin: disPositivos Mviles esPAol 1. Para habilitar los efectos de iluminacin Afterglow mientras est en el modo mvil, primero asegrese de que el transmisor usB no est conectado y encendido. 2. Pulse y mantenga pulsado el botn de encendido en su auricular. Ver que se alternan las luces de las orejeras, indicando que el auricular est buscando un transmisor. 3. Pulse y mantenga pulsado el botn de modo durante 10 segundos hasta que escuche un pitido y el LED de la orejera se vuelva de un color fijo. Su auricular ahora est en modo mvil. el micrfono sin cabezal y el interruptor del modo de iluminacin funcionar igual que si estuviera en el modo de juego predeterminado. 4. conecte el cable gris de 3,5 mm y conecte un extremo al auricular Afterglow inalmbrico y el otro extremo a la salida de audio de un dispositivo mvil. la capacidad del micrfono estar habilitada para llamados telefnicos. 5. en este modo, el volumen se puede ajustar en su dispositivo mvil nicamente. MoDos De ilUMinacin esPAol el aUricUlar inalMbrico aFterGlow inclUye tres Modos de ilUMinacin:
ilUMinacin ManUal: en este modo, las luces de Afterglow se fijarn en azul de manera predeterminada. Puede cambiar los colores pulsando y manteniendo pulsado el botn de modo. Cuando lo suelte, el LED de la orejera se fijar en el color deseado. el auricular inalmbrico Afterglow est programado para recordar el color elegido del auricular. la prxima vez que encienda su auricular inalmbrico Afterglow, las orejeras tendrn el color que escogi anteriormente.
*nota: los efectos de iluminacin del auricular se pueden ajustar mientras se encuentra en modo mvil moviendo el interruptor de iluminacin entre los modos.Para sacar el auricular Afterglow inalmbrico del modo mvil, mantenga pulsado el botn de encendido durante 3 segundos para apagar el auricular. cuando encienda nuevamente el auricular, este ya no estar en modo mvil. observar que las luces alternan, indicando que su auricular est buscando un transmisor usB. nota: el auricular estar en modo de bsqueda durante dos minutos. si dentro de dos minutos su auricular no es emparejado con su transmisor ni colocado en modo mvil, se desactivar. MoDos De aUdio esPAol los Modos de aUdio son PerFiles de sonido Personalizados Para adaP-
tarse a diFerentes PreFerencias. se indican Por indicaciones de voz qUe se activan Presionando el botn de Modo. aUdio PUro: el audio puro ofrece una experiencia de audio bien equilibrada que se enfoca en la direccin y le permite escuchar el juego exactamente segn la intencin de los desarrolla-
dores del juego sin un uso excesivo del procesamiento de la seal digital. realce de Graves: Para aquellos que prefieren el toque extra en la frecuencia inferior, este modo realza las frecuencias de audio bajas y ofrece mayor inmersin sin sacrificar las medias y altas para un audio limpio y sin distorsiones. m ilUMinacin aUtoMtica: los auriculares inalmbricos Afterglow tambin tienen la capacidad de pasar por todos los colores del espectro mientras se encuentran en uso. Mueva el interruptor en la orejera izquierda al cono de la lamparita con una A. las orejeras continuarn pasando a travs de los colores prismticos durante el uso. a ilUMinacin aPaGada: Para apagar la iluminacin de las orejeras, simplemente mueva el interruptor al cono tachado de la lamparita. *nota: en este modo, las funciones del auricular operarn con normalidad. BAterA Y carGa esPAol sU aUricUlar aFterGlow est diseado Para ProPorcionar a los JU-
Gadores Hasta 10 Horas de batera en Una sola carGa. Para JUGar de ForMa ininterrUMPida, PUede carGar el aUricUlar Mientras lo Usa. indicador de batera baJa:
Cuando la batera est baja, el auricular Afterglow se lo notificar con una indicacin de voz. Cuando queden cerca de 10 minutos de batera, los LED de las orejeras del auricular se apagarn, pero usted podr seguir escuchando el audio de su juego o chat. La carga completa de la batera del auricular tardar pocas horas. Puede seguir usndolo mientras lo carga conectando el cable Play & charge al auricular y a un puerto usB activo. indicador de carGa Durante la carga, las luces de las orejeras titilarn, lo cual indica que el auricular se Cuando el auricular est totalmente cargado, las luces de las orejeras volvern al color de est cargando. iluminacin establecido. solucin De ProbleMas esPAol no puedo escuchar el audio del juego. asegrese de que El transmisor USB inalmbrico est conectado a un puerto USB en su PlayStation 4 o 3 y el sistema est encendido. El auricular est encendido y emparejado con el transmisor USB inalmbrico. Esto se indica a travs de un LED fijo en el transmisor USB inalmbrico y las orejeras del auricular. El volumen del juego est encendido. El cable ptico est conectado a la consola y al transmisor En el men Sonido y pantalla, est seleccionado ptico como su salida de audio principal solucin De ProbleMas esPAol no puedo escuchar a otras personas. asegrese de que El dial de volumen del chat est encendido. Haya habilitado audio de chat en los ajustes de sonido de su PlayStation 4. otras personas no pueden escucharme. asegrese de que El auricular est ENCENDIDO y emparejado con su transmisor USB inalmbrico. Esto se indica con un LED azul fijo en la orejera del auricular y en el transmisor usB inalmbrico. El micrfono no est silenciado. Haga clic en el botn SILENCIAR de la orejera izquierda para silenciar y restaurar el sonido usted mismo. **nota: cuando silencia el micrfono, una indicacin de voz le sealar com. deshabilitada. En una computadora, asegrese de que el auricular est seleccionado como una entrada de micrfono haciendo clic con el botn derecho en el cono del altavoz de su barra de herramientas inferior > Dispositivos de grabacin > seleccione Micrfono de auricular. Mi auricular y transmisor Usb inalmbrico no estn emparejados. asegrese de que El auricular no est en modo mvil. Para quitar el auricular del modo mvil, apague el auricular manteniendo pulsado el botn de encendido durante 3 segundos hasta que escuche un pitido. cuando vuelva a encender el auricular, ya no estar en modo mvil. Para volver a emparejar el auricular con un transmisor: encienda el transmisor y espere hasta que vea un leD azul parpadeando lentamente. ubique el botn pequeo del ori-
ficio del pin del lado del transmisor; presione con un objeto delgado hasta que vea que el leD azul comienza a parpadear rpidamente. luego mientras est apagado, pulse y mantenga pulsado el botn de encenDiDo en su auricular durante 10 segundos mientras se alternan los leD de las orejeras. cuando tanto las luces del auricular como del transmisor estn de un color fijo, el emparejamiento inalmbrico estar restablecido. no puedo ajustar el volumen del juego y del chat por separado. asegrese de que La consola est obteniendo el audio del juego desde la salida ptica. Confirme esto en la configuracin de salida de audio. Salida de audio principal: Salida digital (ptica) En la configuracin est seleccionada la opcin audio de chat (esto asegurar que solamente el canal de chat est dirigido al puerto usB) www.pdp.com
1 | Inpho | Internal Photos | 589.03 KiB |
(5) EUT Photo Report No.: 1480539R-RFUSP25V00
(6) EUT Photo Page : 3 of 7
(7) EUT Photo Report No.: 1480539R-RFUSP25V00
(8) EUT Photo Antenna Antenna Page : 4 of 7
(9) EUT Photo Report No.: 1480539R-RFUSP25V00
(10) EUT Photo Page : 5 of 7
(11) EUT Photo Report No.: 1480539R-RFUSP25V00
(12) EUT Photo Page : 6 of 7
(13) EUT Photo Report No.: 1480539R-RFUSP25V00 Page : 7 of 7
1 | Expho | External Photos | 177.88 KiB |
Report No.: 1480539R-RFUSP25V00 Attachment 2 : EUT Detailed Photographs
(1) EUT Photo
(2) EUT Photo Page : 1 of 7
(3) EUT Photo Report No.: 1480539R-RFUSP25V00
(4) EUT Photo Page : 2 of 7
1 | LabelLoc | ID Label/Location Info | 74.02 KiB |
Performance Designed Products, LLC FCC ID Label FCC ID.: X5B-PL051014T 14144 Ventura Blvd., Suite 200 Sherman Oaks, CA 91423 USA Tel : 1-323-234-9911
1 | LabelSmpl | ID Label/Location Info | 33.42 KiB |
Performance Designed Products, LLC FCC ID.: X5B-PL051014T The FCC ID Label will be placed on the equipment as shown in the photograph below. 14144 Ventura Blvd., Suite 200 Sherman Oaks, CA 91423 USA Tel : 1-323-234-9911
1 | ATTESTATION | Cover Letter(s) | 21.07 KiB |
Performance Designed Products, LLC FCC ID.: X5B-PL051014T Sep. 15 , 2014 Federal Communications Commission Authorization and Evaluation Division ATTESTATION FCC ID: X5B-PL051014T Product: Afterglow Fener PS4/PS3 Wireless Dongle Model: PL-051-014T We don't provide any controls or software to allow operation outside the USA frequency band when we sell this product in USA. Sincerely,
------------------------------------------------
Tom Roberts / Chief Technical Officer Performance Designed Products, LLC 14144 Ventura Blvd., Suite 200 Sherman Oaks, CA 91423 USA Tel : 1-323-234-9911
1 | Confidentiality | Cover Letter(s) | 14.51 KiB |
Performance Designed Products, LLC FCC ID.: X5B-PL051003T Sep. 15 , 2014 Performance Designed Products, LLC 14144 Ventura Blvd., Suite 200 Sherman Oaks, CA 91423 USA Tel : 1-323-234-9911 Fax: 1-323-234-9922 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, the Applicant Hereby requests confidential treatment of information accompanying this Application As outlined below:
Schematics: (PL-051-003T) Schem Block Diagram: (PL-051-003T) BlkDia Operational Description: (PL-051-003T) OPDes The above materials contain trade secrets and proprietary information not customarily Released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely,
----------------------------------------------------------
Tom Roberts / Chief Technical Officer Performance Designed Products, LLC 14144 Ventura Blvd., Suite 200 Sherman Oaks, CA 91423 USA Tel : 1-323-234-9911
1 | Declaration of authorization | Cover Letter(s) | 18.90 KiB |
Performance Designed Products, LLC RF_160, Issue 02 Performance Designed Products, LLC... 14144 Ventura Blvd., Suite 200 Sherman Oaks, CA 91423 USA. Oaks .. United States . Gene Chang (1) QuieTek Corp. Fl.2, No.345, Xin-hu 2nd Rd., Nei-hu District Taipei Taiwan Declaration of Authorization We Name:
Address:
City:
Country:
Declare that:
Name Representative of agent:
Agent Company name:
Address:
City:
Country is authorized to apply for Certification of the following product(s):
Product description: Afterglow Fener PS4/PS3 Wireless Dongle FCC ID:
Trademark:
on our behalf. Date:
City:
Name:
Function:
Chief Technical Officer X5B-PL051014T pdp, Afterglow Tom Roberts .. (2) 2014/09/15.. Oaks .. Signature:
Notes:
(1): Required for FCC application
(2): For FCC it must be the Grantee Code owner or the authorized agent.
1 | Doc | Cover Letter(s) | 14.29 KiB |
Performance Designed Products, LLC 14144 Ventura Blvd., Suite 200 Sherman Oaks, CA 91423 USA Tel : 1-323-234-9911 Fax: 1-323-234-9922 Attestation for FCC Declaration of Conformity Data: Sep. 15, 2014 FCC ID: X5B-PL051003T Please be notified that we, the undersigned, Performance Designed Products, LLC.declares that the product which bears the above FCC ID is also compliant with the FCC requirements for DoC. The test report number supporting the DoC is 1480540R-ITUSP01V00 Testing in regards to this report was done by QuieTek Corporation, located at 2F, No.345, Xinhu 2nd Rd., Neihu District,, Taipei Taiwan, which has been accredited in accordance to all of the requirements of 47CFR 2.948 (d) and (e) of the FCC rules and KDB349827. Sincerely,
------------------------------------------------------------
Tom Roberts / Chief Technical Officer Performance Designed Products, LLC Tel : 1-323-234-9911 Fax: 1-323-234-9922 Email: Tom.roberts@pdp.com
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2014-09-25 | 2403.35 ~ 2479.35 | DTS - Digital Transmission System | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2014-09-25
|
||||
1 | Applicant's complete, legal business name |
Performance Designed Products, LLC
|
||||
1 | FCC Registration Number (FRN) |
0019508654
|
||||
1 | Physical Address |
14144 Ventura Blvd, Suite 200 Sherman.
|
||||
1 |
14144 Ventura Blvd
|
|||||
1 |
Oaks
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
c******@telefication.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
X5B
|
||||
1 | Equipment Product Code |
PL051014T
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
T**** R****
|
||||
1 | Title |
Chief Technical Officer
|
||||
1 | Telephone Number |
1-323********
|
||||
1 | Fax Number |
1-323********
|
||||
1 |
T******@pdp.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
QuieTek Corporation
|
||||
1 | Name |
M****** C********
|
||||
1 | Physical Address |
Taiwan
|
||||
1 | Telephone Number |
886-2********
|
||||
app s | Non Technical Contact | |||||
1 | Firm Name |
QuieTek Corporation
|
||||
1 | Name |
M**** C********
|
||||
1 | Physical Address |
Taiwan
|
||||
1 | Telephone Number |
886-2********
|
||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DTS - Digital Transmission System | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Afterglow Fener PS4/PS3 Wireless Dongle | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | Yes | ||||
1 | Grant Comments | Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
DEKRA TESTING AND CERTIFICATION CO., LTD. LinKou
|
||||
1 | Name |
S**** H********
|
||||
1 | Telephone Number |
+886-******** Extension:
|
||||
1 | Fax Number |
+886-********
|
||||
1 |
s******@dekra.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2403.35000000 | 2479.35000000 | 0.0030000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC