For ages 12+
AFTERGLOW AP.2 For PlayStation3 For:
PL-6422A Thank you for purchasing the AFTERGLOW AP.2 Wireless for PlayStation3!
3) The AFTERGLOW AP.2s default setting is ON. Contents:
1 AFTERGLOW AP.2 for PlayStation3. 1 AFTERGLOW Wireless Link USB Adapter 1 USB Charge Cable 1 Manual Using the AFTERGLOW AP.2:
1) The AFTERGLOW AP.2 is designed to work with the Sony PlayStation3 videogame system. 2) Your new AP.2 Wireless controller features an integrated rechargeable battery pack that should be fully PlayStation3 when it is powered on. Connect the mini-USB plug to your AP.2 controller. The indicator Wireless Link USB Adapter into one of your PlayStation3s USB ports while the system is powered on. Press any button on your AP.2 controller and an automatic pairing will take place. 4) After pairing is complete your AP.2 controller will show its controller number designation via one of 4 indicator LEDs. It is now ready to use. Time for some gaming!
soon to avoid interruption of play. Changing AFTERGLOW Modes:
AP.2 must be connected to a PlayStation3 console to function. 2) The AFTERGLOW button on the AP.2 is located near the controller indicator lights on the controller. 4) Press the AFTERGLOW button once to change to VIBRATION mode. Lighting occurs in this mode when the AP.2 rumble motors activate. 5) Press the AFTERGLOW button once more to change to OFF mode. No lighting occurs in this mode. 6) Press the AFTERGLOW button once more to return to ON mode. 7) Cycle through the three settings as often as you like and enjoy the AFTERGLOW in your favorite mode!
Frequently Asked Questions Can I charge my AP.2 controller before the battery is completely drained? -Yes, you can charge the AP.2 any time you like. You will not damage the battery by charging when the battery still carries a charge. Can I use my AP.2 controller while it is charging via USB? -Yes, you can play with the AP.2 and charge it at the same time. Can I use multiple AP.2 controllers with my PlayStation3? -Yes, you can use up to 4 AP.2 controllers with your PlayStation3 provided your system has 4 USB ports available. My AP.2 controller will not sync with the PlayStation3. What can I do?
controller and a wireless link should be established. Make sure your PlayStation 3 is powered on and that your AP.2 controllers battery has a charge. CAUTION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Consult the dealer or an experienced radio/TV technician for help. FCC ID for Controller: X5B-PL6422A1 FCC ID for Dongle: X5B-PL6422A2 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The equipment complies with FCC RF exposure limits set forth for an uncontrolled environment. The equipment must not be co-located or operating in conjunction with any other antenna or transmitter. IC for Controller: 8814A-PL6422A1 This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. IC for Dongle: 8814A-PL6422A2 2 year limited warranty. See www.pdp.com for details.
*please keep this information for future reference 1840 East 27th Street Vernon, CA 90058 USA Siena Court, Broadway, Maidenhead SL6 1NJ For technical questions please visit www.pdp.com or call: 1-800-331-3844 (USA & Canada only) 2014 Performance Designed Products LLC. All rights reserved. PDP is a trademark, and AFTERGLOW is a registered trademark, of Performance Designed Products LLC. PlayStation3 is a registered trademark of Sony Computer Entertainment, Inc. This product is not designed, manufactured, sponsored or endorsed by Sony Computer Entertainment. Merci davoir achet lAFTERGLOWMD MD 3!
5) Appuyez de nouveau sur le bouton de lAFTERGLOWMD pour passer au mode OFF (Dsactiv). Aucune illumination ne se produit dans ce mode. Contenu :
1 AFTERGLOWMD AP.2 pour PlayStationMD 3. 1 Cble USB de charge 1 manuel MD Utilisation de lAFTERGLOWMD AP.2 :
1) LAFTERGLOWMD AP 2 est conu pour tre utilis avec le systme de jeux vido Sony PlayStationMD 3. charg avant toute premire utilisation. Pour cela, connectez la prise USB large un port USB aliment, tel que celui de la PlayStationMD 3 quand elle est en marche. Connectez la miniprise USB votre manette AP.2. Les tmoins DEL de la manette AP.2 clignoteront ds que la charge dbutera. 3) Quand la charge est termine les tmoins DEL de lAP.2 steindront. ce moment l, insrez ladaptateur MD dans lun des ports USB de la PlayStationMD 3 quand le systme est en marche. Appuyez sur nimporte quel bouton de la manette AP.2 pour lancer le couplage automatique. 6) Pour revenir au mode activ (ON), appuyez de nouveau sur le bouton de lAFTERGLOWMD. 7) Alternez entre ces trois possibilits autant que vous le souhaitez et divertissez-vous avec lAFTERGLOWMD dans votre mode favori!
Questions les plus frquentes Est-ce que je peux recharger ma manette AP.2 avant que la batterie ne soit compltement dcharge? -Oui, vous pouvez charger lAP.2 tout moment. La batterie ne sera pas endommage si vous la rechargez alors quelle nest pas dcharge. Est-ce que je peux utiliser ma manette AP.2 pendant quelle se recharge par le port USB? -Oui, vous pouvez jouer avec lAP.2 et la recharger en mme temps. Est-ce que je peux utiliser plusieurs manettes AP.2 avec ma PlayStationMD 3? -Oui, vous pouvez utiliser un maximum de 4 manettes AP.2 avec votre PlayStationMD 3 sous rserve que votre systme dispose de 4 ports USB disponibles. Ma manette AP.2 ne se synchronise pas avec la PlayStationMD 3. Que faut-il faire? - Quand vous insrez PlayStationMD 3 est en marche et que la batterie de la manette AP.2 est charge. IC pour Controller: 8814A-PL6422A1 Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio RSS-210. Lexploitation est autorise aux deux conditions suivantes
: (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. IC pour Dongle: 8814A-PL6422A2 Le dispositif rencontre lexemption des limites courantes dvaluation dans la section 2.5 de RSS 102 et la conformit lexposition de RSS-102 rf, utilisateurs peut obtenir linformation canadienne sur lexposition et la conformit de rf. tmoins DEL. Elle est dsormais prte tre utilise. Cest le moment de jouer!
Garantie limite de 2 ans. Voir www.pdp.com pour plus de dtails.
* Veuillez conserver cette information pour toute rfrence ultrieure Siena Court, Broadway, Maidenhead SL6 1NJ 1840 East 27th Street Vernon, CA 90058 USA www.pdp.com ou appelez le : 1-800-331-3844 (TATS-UNIS ET CANADA UNIQUEMENT) Pour toute question technique allez sur le site 2014 Performance Designed Products, LLC. Tous droits rservs. PDP est une marque de commerce et AFTERGLOW est une marque dpose de Performance Designed Products LLC. PlaystationMD 3 est une marque dpose de Sony Computer Entertain-
ment Inc. Ce produit na pas t conu, fabriqu, commandit ou approuv par Sony Computer Entertainment. 5) Quand la batterie de lAP.2 est faible, le tmoin DEL clignote rapidement. Il est alors ncessaire de charger la manette ds que possible pour viter linterruption du jeu. 1) LAFTERGLOWMD
(Dsactiv). LAP.2 doit tre connecte une console PlayStationMD 3 pour fonctionner. 2) Le bouton de lAFTERGLOWMD sur lAP.2 est situ prs des lumires des tmoins DEL de la manette. MD :
3) Le rglage par dfaut de lAFTERGLOWMD AP.2 est ON (Activ). 4) Appuyez une fois sur le bouton AFTERGLOWMD pour passer en mode VIBRATION . Lillumination intervient dans ce mode quand les moteurs de bruit de fond de lAP.2 sont activs. Gracias por comprar el AFTERGLOW AP.2 para PlayStation3!
Contenido:
1 AFTERGLOW AP.2 para PlayStation3. 1 adaptador USB de conexin inalmbrica para AFTERGLOW 1 Cable de carga USB 1 manual Uso del AFTERGLOW AP.2:
1) El AFTERGLOW AP.2 est diseado para funcionar con el sistema de videojuegos Sony PlayStation3. 2) Su control inalmbrico AP.2 nuevo incorpora un paquete de bateras recargable que se debe cargar completamente antes del primer uso. Par eso, conecte el enchufe USB ancho a un puerto USB alimentado, tal como su PlayStation3 cuando est encendido. Conecte el enchufe mini USB a su control AP.2. Los indicadores LEDs del control AP.2 parpadearn mientras se carga. 3) Cuando la carga se terminar los indicadores LEDs del AP.2 se apagarn. En este momento, inserte el adaptador USB de conexin inalmbrica del AFTERGLOW en uno de los puertos USB de su PlayStation3 cuando el sistema se encienda. uno de los 4 indicadores LEDs. Ya est listo para su uso. Ahora es el tiempo de disfrutar un videojuego!
5) Cuando la batera de su AP.2 est baja, el indicador LED parpadear rpidamente. Usted tendr que cargar su control lo antes posible para evitar una interrupcin en el juego. Cambio de modo del AFTERGLOW:
1) El AFTERGLOW AP.2 cuenta con tres (3) modos de efectos de iluminacin: ON (Activado), VIBRATION
(Vibracin) y OFF (Desactivado). Se necesita conectar el AP.2 a la PlayStation 3 para que funcione.2) El botn del AFTERGLOW en el AP.2 est situado cerca de los indicadores luminosos del control. Vielen Dank fr den Kauf des AFTERGLOW AP.2 Wireless fr PlayStation3!
Inhalt:
1 AFTERGLOW AP.2 fr PlayStation3 1 AFTERGLOW Wireless-USB-Adapter 1 USB-Ladekabel 1 Bedienungsanleitung Verwendung des AFTERGLOW AP.2:
1) Der AFTERGLOW AP.2 ist zum Gebrauch mit der Sony PlayStation3 gedacht. 2) Dein neuer AP.2 Wireless-Controller hat einen integrierten Akkupack, der vor dem ersten Einsatz voll stndig aufgeladen werden sollte. Hierzu schliet du den groen USB-Stecker an einen USB-Port an, der Strom liefert, z. B. einen USB-Port an der eingeschalteten PlayStation3. Den Mini-USB-Stecker verbindest du mit dem AP.2-Controller. Die LEDs am AP.2-Controller blinken, whrend der Akku geladen wird. 3) Wenn der Akku vollstndig geladen ist, leuchten die LEDs am AP.2 nicht mehr. Jetzt schliet du den AFTERGLOW Wireless-USB-Adapter an einen USB-Port an der eingeschalteten PlayStation3 an. Drck eine beliebige Taste am AP.2-Controller. Nun wird der Controller automatisch mit dem Adapter gekoppelt
(Pairing). 4) Nach Abschluss des Pairing-Vorgangs wird am AP.2-Controller die Controllernummer angezeigt, indem eine der vier LEDs aufleuchtet. Jetzt ist alles startklar. Zeit fr die erste Game-Runde!
5) Wenn der Akku im AP.2 fast leer ist, blinkt die LED in schnellem Rhythmus. Du solltest den Controller dann aufladen, damit er nicht spter mitten im Spiel nicht mehr funktioniert. ndern der AFTERGLOW-Modi:
1) Der AFTERGLOW AP.2 hat drei Lichteffektmodi: EIN, VIBRATION und AUS. Der AP.2 kann nur in Verbindung mit einer PlayStation3-Konsole verwendet werden. 2) Die AFTERGLOW-Taste am AP.2 befindet sich neben den Controller-LEDs. 3) Standardmig ist beim AFTERGLOW AP.2 die Einstellung EIN aktiv. 4) Drck die AFTERGLOW-Taste einmal, um in den Modus VIBRATION umzuschalten. In diesem Modus siehst du die Lichteffekte, wenn die Vibrationsmotoren des AP.2 aktiviert werden. 3) El ajuste predefinido del AFTERGLOW AP.2 es ON (Activado). 4) Presione el botn del AFTERGLOW una vez para cambiar al ajuste de VIBRATION (Vibracin). La iluminacin se produce en este modo cuando los motores para la vibracin del AP.2 se activen. 5) Presione el botn del AFTERGLOW una vez ms para cambiar al modo OFF (Desactivado). No iluminacin se produce en este modo. 6) Para regresar al modo activado (ON), presione el botn del AFTERGLOW una vez ms. 7) Alterne entre los tres ajustes tan a menudo como guste y disfrute del AFTERGLOW en su modo favorito!
Preguntas frecuentes Se puede cargar mi control AP.2 antes que la batera sea completamente descargada? -S, pueda cargar el AP.2 cuando quiera. No se daar la batera si se carga cuando no est descargada. Se puede usar el control AP.2 mientras est cargando usando el USB? -S, pueda jugar con su AP.2 y cargarlo al mismo tiempo. Se puede usar varios controles AP.2 con mi PlayStation3? -S, se pueden usar hasta 4 AP.2 controles con su PlayStation3 siempre y cuando su sistema tenga 4 puertos USB disponibles. Mi control AP.2 no se sincroniza con la PlayStation3. Qu tengo que hacer? -La primera vez que inserte el adaptador USB de conexin inalmbrica para el AP.2 un indicador luminoso del adaptador parpadear. Presione varios botones en su control AP.2 y un enlace inalmbrico tiene que establecerse. Asegrese que su PlayStation 3 est encendido y que la batera de su control AP.2 est cargada. Garanta limitada de 2 aos. Refirase a www.pdp.com para obtener ms detalles.
* Por favor guarde esta informacin para referencia en el futuro. 1840 East 27th Street Vernon, CA 90058 USA Siena Court, Broadway, Maidenhead SL6 1NJ www.pdp.com o llame al: 1-800-331-3844 (EE.UU. Y CANAD NICAMENTE) Si tiene preguntas tcnicas, favor visite 2014 Performance Designed Products LLC. Todos los derechos reservados. PDP es una marca comercial, y AFTERGLOW es una marca registrada de Performance Designed Products LLC. PlayStation3 es una marca registrada de Sony Computer Entertainment, Inc. Este producto no est diseado, fabricado o promocionado por Sony Computer Entertainment.