all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
manual | Users Manual | 1.98 MiB | ||||
1 | Cover Letter(s) | |||||||
1 | External Photos | |||||||
1 | Internal Photos | |||||||
1 | ID Label/Location Info | |||||||
1 | Cover Letter(s) | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos |
1 | manual | Users Manual | 1.98 MiB |
CRYSIS 2 Bluetooth Headset For PlayStation3 For:
PL-6385 Thank you for purchasing the Crysis 2 Bluetooth Headset for Playstation 3!
Contents 1 Crysis 2 Bluetooth Headset for Playstation 3 1 Power Cord Charging the Battery 1) Open the flap covering the connector port on the Crysis 2 Bluetooth Headset for Playstation 3. 2) Connect the mini USB end of the power cord to the connector port on the Crysis 2 Bluetooth Headset for Playstation 3. 3) Connect the USB end of the power cord to a USB port on the Playstation 3. 4) When connected to the power cord and charging, the LED on the Crysis 2 Bluetooth Headset for Playstation 3 will light up solid red. 5) When connected to the power cord and fully charged, the LED on the Crysis 2 BluetoothHeadset for Playstation 3 will light up solid blue. Powering the Crysis 2 Bluetooth Headset for Playstation 3 ON and OFF 1) To power ON the Crysis 2 Bluetooth Headset for Playstation 3, press and hold the power button for about 3 seconds. The LED on the Crysis 2 Bluetooth Headset for Playstation 3 will blink red 3 times. 2) To power OFF the Crysis 2 Bluetooth Headset for Playstation 3, press and hold the power button for about 3 seconds. The LED on the Crysis 2 Bluetooth Headset for Playstation 3 will blink red 2 times. Pairing the Crysis 2 Bluetooth Headset with the Playstation 3 1) Power your Playstation 3 OFF for about 10 seconds and then power it back ON. 2) Select Access Settings on the Playstation 3 Settings menu. 3) Select Register Bluetooth Device. 4) Select Manage Bluetooth Device. 5) Select Yes to register a new device, if this is the first time registering a Bluetooth device. 6) Select Start Scanning. 7) Hold down the Power Button on Bluetooth headset for 6 seconds. 8) When prompted for a pass key, enter 0000. 9) For quick disconnection, press the Power Button once to disconnect it from the Playstation 3, and again to re-connect. Pairing the Crysis 2 Bluetooth Headset with Bluetooth Compatible Device 1) Follow the intructions for the Bluetooth Handheld Device concerning pairing with a Bluetooth Headset. Verify that the Crysis 2 Bluetooth Headset for Playstation 3 is powered ON. When prompted for a pass key, enter 0000. 2) LED indication: Standby unconnecting with mobilephone: red LED will blink once every 3 seconds. Standby connecting with mobilephone: red LED will blink twice every 3 seconds. Talking: red LED will blink twice every 5 seconds. Adjusting the Microphone Input Levels on the Playstation 3 1) To adjust your microphone input levels on the Playstation 3, go to the Audio Device Settings Menu on your Playstation 3 and select the Bluetooth Handheld Device. Adjusting the Volume Level on the Crysis 2 Bluetooth Headset with the Playstation 3 1) To adjust the volume level on the Crysis 2 Bluetooth Headset for Playstation 3, use the vol + button to increase the sound level, and the vol button to decrease the sound level. Warning: Extended exposure to high volumes when using a headset may result in temporary or permanent hearing loss. Using the Mute Button on the Crysis 2 Bluetooth Headset 1) To mute the microphone level on the Crysis2 Headset for Playstation 3*, press and hold the vol+button for 3 seconds. To return the microphone level to normal, press and hold the vol+ button for 3 seconds. Adjusting the Earloop on the Crysis 2 Bluetooth Headset 1) If your prefer to wear the Crysis 2 Bluetooth Headset for Playstation 3 on your left ear, gently remove and flip over the earloop 180 degrees. Gently snap the earloop back onto the Crysis 2 Bluetooth Headset for Playstation 3 and rotate it into position. CAUTION: Changes or modifications to this equipment not expressly approved by the manufacturer could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC ID: X5B-PL6385 This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules and RSS-210 of the IC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. 1840 East 27th Street Vernon, CA 90058 USA CBX II - 382-390 Midsummer Blvd., Milton Keynes, Buckinghamshire MK9 2RG UK For technical questions please visit www.pdp.com or call: 1-800-331-3844 (USA ONLY) 2011 Performance Designed Products LLC. All rights reserved. PDP is a trademark of Performance Designed Products LLC. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and are used under license by PDP. All other brand names are trademarks or registered trademarks of their respective owners. PlayStation 3 is a registered trademark of Sony Computer Entertainment, Inc. This product is not designed, manufactured, sponsored or endorsed by Sony. This product is manufactured under license from Crytek GmbH. The computer game Crysis 2 is intellectual property of Crytek GmbH 2011. Crytek , Crysis and certain characters of Crysis 2 are registered trademarks or trademarks or design patents of Crytek GmbH in Germany, USA and other countries. Merci davoir achet cette oreillette Bluetooth Crysis 2 pour Playstation 3MD!
Contenu de la bote 1 oreillette Bluetooth Crysis 2 pour Playstation 3MD 1 cordon dalimentation Charge de la batterie 1) Soulevez la languette recouvrant le port du connecteur sur loreillette Bluetooth Crysis 2 pour Playstation 3MD . 2) Connectez lextrmit mini USB du cordon dalimentation au port du connecteur sur loreillette Bluetooth Crysis 2 pour Playstation 3. Rglage des niveaux dentre du microphone de la Playstation 3MD 1) Pour rgler le niveau dentre de votre microphone sur la Playstation 3MD, ouvrez le menu Audio Device Settings (Paramtres du priphrique audio) de la Playstation 3MD. Rglage du niveau du volume de loreillette Bluetooth Crysis 2 pour Playstation 3MD 1) Pour rgler le niveau du volume de loreillette Bluetooth Crysis 2 pour Playstation 3MD, utilisez la touche vol
+ pour augmenter le niveau sonore et la touche vol pour le diminuer. Avertissement : Une exposition prolonge des volumes levs lors de lutilisation dune oreillette peut tre source de perte de loue temporairement ou de faon permanente. Utilisation du bouton de mise en sourdine sur loreillette Bluetooth Crysis 2 1) Pour couper le niveau du microphone sur le Crysis2 Casque pour Playstation 3 *, appuyez et maintenez la touche VOL + pendant 3 secondes. Pour revenir au niveau du microphone la normale, appuyez et maintenez la touche VOL + pendant 3 secondes. Mode demploi MDE moyens microphone va tre arrt la place de lcouteur. Rglage du contour doreille de loreillette Bluetooth Crysis 2 1) Si vous prfrez utiliser loreillette Bluetooth Crysis 2 Bluetooth pour Playstation 3MD sur loreille gauche, retirez dlicatement le contour doreille et tournez-le de 180. Enclenchez de nouveau le contour doreille sur loreillette Bluetooth Crysis 2 pour Playstation 3 et faites-le pivoter dans sa position. 3) Connectez lextrmit USB du cordon dalimentation au port USB de la Playstation 3. ATTENTION :Tous changements ou modifications non expressment approuvs par le fabricant pourrait annuler lautorisation des utilisateurs de mettre cet quipement en service.Cet quipement a t test et dclar conforme aux limitations prvues dans le cadre de la catgorie B des appareils numriques, dfinies par larticle 15 du rglement de la FCC. Ces limites ont t tablies pour fournir une protection raisonnable contre les interfrences prjudiciables lors dune installation rsidentielle. Cet quipement gnre, utilise et diffuse des ondes radio et sil nest ni install ni utilis conformment aux instructions en vigueur, il peut provoquer des interfrences prjudiciables aux communications radio. Cependant, il nest pas possible de garantir quaucune interfrence ne se produira pour une installation particulire. Si cet quipement produit des interfrences prjudiciables lors de rceptions radio ou tlvises, qui peuvent tre dtectes en teignant puis en rallumant lappareil, essayer de corriger linterfrence au moyen de lune ou de plusieurs des mesures suivantes :
rorienter ou dplacer lantenne rceptrice;
augmenter la distance entre lquipement et le rcepteur;
brancher lquipement sur la prise lectrique dun circuit diffrent de celui auquel le rcepteur est reli;
contacter le revendeur ou un technicien radio/tlvision qualifi pour toute assistance. Identification FCC : X5B-PL6385 Cet quipement est conforme aux limitations prvues par la FCC pour lexposition aux irradiations dans le cadre dun environnement daccs libre. Il est galement conforme larticle 15 du rglement de la FCC et larticle CNR-210 du rglement dIC. Son fonctionnement est soumis aux deux conditions suivantes :
(1) Cet appareil ne doit pas mettre dinterfrences nuisibles, et
(2) cet appareil doit accepter toutes les interfrences reues, y compris celles pouvant provoquer un fonctionnement non dsir. 4) Quand loreillette Bluetooth Crysis 2 pour Playstation 3 est connecte et en cours de charge, la DEL de loreillette sallume en rouge continu. 5) Quand loreillette Bluetooth Crysis 2 pour Playstation 3 est connecte et compltement charge, la DEL de loreillette sallume en bleu continu. Mise sous et hors tension de loreillette Bluetooth Crysis 2 pour Playstation 3MD 1) Pour mettre sous tension (ON) loreillette Bluetooth Crysis 2 pour Playstation 3MD, appuyez et maintenez enfonce la touche de mise sous tension pendant environ 3 secondes. La DEL de loreillette Bluetooth Crysis 2 pour Playstation 3 clignote en bleu 3 fois. 1840 East 27th Street Vernon, CA 90058 USA CBX II - 382-390 Midsummer Blvd., Milton Keynes, Buckinghamshire MK9 2RG UK Pour toute question technique allez sur le site www.pdp.com ou appelez le : 1-800-331-3844 (TATS-UNIS UNIQUEMENT) 2011 Performance Designed Products, LLC. Tous droits rservs. PDP est une marque de commerce de Performance Designed Products LLC. Le mot servant de marque BluetoothMD et ses logos sont des marques dposes de Bluetooth SIG, Inc. Et sont utiliss sous licence par PDP. Tous les autres noms de marque sont des marques de commerce ou des marques dposes de leurs propritaires respectifs. PlayStation 3 est une marque dpose de Sony Computer Entertainment Inc. Ce produit na pas t conu, fabriqu, commandit ou approuv par Sony. Ce produit est fabriqu sous licence de Crytek GmbH. Le jeu vido pour ordinateur Crysis 2 est la proprit intellectuelle de Crytek GmbH 2011. CrytekMD, CrysisMD et certains personnages de Crysis 2 sont des marques dposes ou des marques de commerce ou des brevets de dessins de Crytek GmbH en Allemagne, aux tats-Unis et dans dautres pays. Gracias por la compra de este auricular Bluetooth Crysis 2 para Playstation 3!
Contenido 1 auricular Bluetooth Crysis 2 para Playstation 3 (1) 1 cable de alimentacin Carga de la batera 1) Abra la cubierta del puerto del conector del auricular Bluetooth Crysis 2 para Playstation 3. 2) Conecte el extremo del cable de alimentacin con mini USB al puerto del conector del auricular Bluetooth Crysis 2 para Playstation 3. 3) Conecte el extremo USB del cable de alimentacin al puerto USB del Playstation 3. 2) Pour mettre hors tension (OFF) loreillette Bluetooth Crysis 2 pour Playstation 3MD, appuyez et maintenez enfonce la touche de mise sous tension pendant environ 3 secondes. La DEL de loreillette Bluetooth Crysis 2 pour Playstation 3MD clignote en bleu 2 fois. Couplage de loreillette Bluetooth Crysis 2 la Playstation 3MD 1) La puissance dalimentation de votre Playstation 3 OFF pendant environ 10 secondes, puis rallumez. 2) Slectionnez Access Settings (Paramtres daccs) dans le menu Settings (Paramtres) de la Playstation 3MD. 3) Slectionnez Register Bluetooth Device (Enregistrer un dispositif Bluetooth). 4) Slectionnez Manage Bluetooth Device (Grer les dispositifs Bluetooth). 5) Slectionnez Yes (Oui) pour enregistrer un nouveau dispositif, si cest la premire fois quun dispositif Bluetooth est enregistr. 6) Slectionnez Start Scanning (Commencer la recherche). 7) Appuyer sur le bouton dalimentation sur le casque Bluetooth pendant 6 secondes. 8) linvite de saisie dun mot de passe, entrez 0000. 9) Pour un dbranchement rapide, appuyez sur le bouton Power une fois pour le dbrancher de la Playstation 3, et nouveau pour communiquer. Jumelage du Crysis 2 oreillette Bluetooth avec un appareil compatible Bluetooth 1) Pour le couplage avec une oreillette Bluetooth, appliquez les instructions du tlphone Bluetooth. Vrifiez que loreillette Bluetooth Crysis 2 pour Playstation 3MD est sous tension (ON). linvite de saisie dun mot de passe, entrez 0000. 2) Lindication de LED: Veille unconnecting avec tlphone mobile: la LED rouge clignote une fois toutes les 3 secondes. Attente de connexion avec le portable: LED rouge clignote deux fois toutes les 3 secondes. Parler: LED rouge clignote deux fois toutes les 5 secondes. 4) Cuando se han conectado al cable de alimentacin y se estn cargando, el indicador LED del auricular Bluetooth Crysis 2 para Playstation 3 se iluminar en rojo en continuo 5) Cuando se han conectado al cable de alimentacin y estn completamente cargados, el indicador LED del auricular Bluetooth Crysis 2 para Playstation 3 se iluminar en azul en continuo. Encendido y apagado del auricular Bluetooth Crysis 2 para Playstation 3 1) Para encender (ON) el auricular Bluetooth Crysis 2 para Playstation 3, mantenga presionado el botn de encendido por aproxi madamente 3 segundos. El indicador LED del auricular Bluetooth Crysis 2 para Playstation 3 parpadear en azul 3 veces. 2) Para apagar (OFF) el auricular Bluetooth Crysis 2 para Playstation 3, mantenga presionado el botn de encendido por aproxima damente 3 segundos. El indicador LED del auricular Bluetooth Crysis 2 para Playstation 3 parpadear en rojo 2 veces. Emparejamiento del auricular Bluetooth para Crysis con el Playstation 3 1) Fuente de alimentacin de su Playstation 3 OFF durante unos 10 segundos y luego de nuevo en ON. 2) Seleccione Access Settings (Ajustes de acceso) en el men Settings (Ajustes) del Playstation 3. 3) Seleccione Register Bluetooth Device (Registrar dispositivos Bluetooth). 4) Seleccione Manage Bluetooth Device (Administrar dispositivos Bluetooth). 5) Seleccione Yes (S) para registrar un nuevo dispositivo, si est registrando un dispositivo Bluetooth por primera vez. 6) Seleccione Start Scanning (Iniciar bsqueda). 7) Mantenga pulsado el botn de encendido del auricular Bluetooth durante 6 segundos. 8) Cuando se le preguntar de entrar la contrasea, entre 0000. 9) Para la desconexin rpida, presione el botn de encendido una vez para desconectar de la Playstation 3, y otra vez para volver a conectar. Sincronizar el Crysis 2 Auricular Bluetooth con dispositivos Bluetooth compatibles 1) Siga las instrucciones para el telfono compatible con Bluetooth para el emparejamiento con el auricular. Verifique que el auricular Bluetooth Crysis 2 para Playstation 3 est encendido (ON). Cuando se le pregun tar de entrar la contrasea, entre 0000. 2) LED de indicacin: En espera unconnecting con telfono mvil: el LED rojo parpadear una vez cada 3 segundos. En espera de conectar con telfono mvil: el LED rojo parpadea dos veces cada 3 segundos. Hablar: LED rojo parpadea dos veces cada 5 segundos. Ajuste de los niveles de entrada del micrfono en el Playstation 3 1) Para ajustar los niveles de entrada de su micrfono en el Playstation 3, abra el men Audio Device Settings (Ajustes de los dispositivos de audio) en su Playstation 3 y seleccione Bluetooth Handheld Device (Dispositivo porttil Bluetooth). Ajuste del nivel del volumen en el auricular Bluetooth Crysis 2 para Playstation 3 1) Para ajustar el nivel del volumen en el auricular Bluetooth Crysis 2 para Playstation 3, use el botn vol + para aumentar el nivel del sonido y el botn vol para bajarlo. Advertencia: una exposicin extendida a volmenes elevados cuando se usan los auriculares puede resultar en una prdida del odo ya sea temporalmente o permanente. Uso del botn de silenciar en el auricular Bluetooth Crysis 2 1) Para silenciar el volumen del micrfono en el auricular Crysis2 para Playstation 3 *, presione y mantenga presionado el botn VOL
+ durante 3 segundos. Para devolver el nivel del micrfono a la prensa normal, y mantenga presionado el botn VOL + durante 3 segundos. Ajuste del gancho para la oreja oreja en el auricular Bluetooth Crysis 2 1) Si prefiere usar el auricular Bluetooth Crysis 2 para Playstation 3 en su oreja izquierda, remueva delica damente el gancho y dele la vuelta de 180. Colquelo nuevamente en el auricular Bluetooth Crysis 2 para Playstation 3 y grele en su posicin. CUIDADO: Cualquier cambio o modificacin no aprobado expresamente por el fabricante puede anular la autoridad del usuario para operar el equipo. Este equipo ha sido sometido a prueba y se ha determinado que satisface los lmites establecidos para ser clasificado como dispositivo digital de Clase B, de acuerdo con la Parte 15 del reglamento FCC. Estos lmites estn diseados para proporcionar una proteccin razonable contra interferencias dainas en un ambiente residencial. Este equipo genera, utiliza y puede irradiar energa de radiofrecuencia y, si no es instalado y utilizado de acuerdo a las instrucciones, puede causar interferencias perjudiciales en las comunicaciones de radio. Sin embargo, no se garantiza que no ocurrir interferencia en una instalacin particular. Si este equipo causa interferencias perjudiciales en la recepcin de la seal de radio o televisin, lo cual puede comprobarse encendiendo y apagando el equipo alternativamente, se recomienda al usuario corregir la interferencia mediante uno de los siguientes procedimientos:
Cambie la orientacin o la ubicacin de la antena receptora. Aumente la distancia entre el equipo y el receptor. Conecte el equipo a un tomacorriente de un circuito distinto de aquel al que est conectado el receptor. Solicite consejo al distribuidor o a un tcnico experto en radio/TV para obtener ayuda. ID DE LA FCC: X5B-PL6385 Este equipo cumple con los lmites de exposicin a la radiacin de radiofrecuencia de la FCC especificados para un ambiente de acceso libre y tambin se adhiere a la parte 15 del reglamento de FCC y RSS-210 del reglamento IC. Su utilizacin est sujeta a las siguientes dos condiciones:
(1) este dispositivo no puede causar interferencia daina, y
(2) este dispositivo debe aceptar cualquier interferencia recibida, incluyendo interferencias que puedan causar una operacin no deseada. 1840 East 27th Street Vernon, CA 90058 USA CBX II - 382-390 Midsummer Blvd., Milton Keynes, Buckinghamshire MK9 2RG UK Si tiene preguntas tcnicas, favor visite www.pdp.com o llame al: 1-800-331-3844 (EE.UU. NICAMENTE) 2011 Performance Designed Products LLC. Todos los derechos reservados. PDP es una marca comercial de Performance Designed Products LLC. La palabra que sirve de marca Bluetooth y sus logotipos son marcas registradas propiedad de Bluetooth SIG, Inc. y se usan bajo licencia por PDP. Todos los otros nombres de marca son marcas comerciales o marcas registradas de sus respectivos dueos. PlayStation 3 es una marca regis-
trada de Sony Computer Entertainment, Inc. Este producto no est diseado, fabricado o promocionado por Sony. Este producto est fabricado bajo licencia de Crytek GmbH. El videojuego para computadora Crysis 2 es la propiedad intelectual de Crytek GmbH 2011. Crytek, Crysis y ciertos personajes de 2 son marcas registradas o marcas comerciales o patentes de dibujos de Crytek GmbH en Alemania, los EE.UU. y otros pases. Vielen Dank fr den Kauf des Crysis 2 Bluetooth-Headsets fr Playstation 3!
Inhalt 1 Crysis 2 Bluetooth-Headset fr Playstation 3 1 Ladekabel Aufladen der Batterie 1) Lasche ber dem Anschluss am Crysis 2 Bluetooth-Headset for Playstation 3 ffnen. 2) Mini-USB-Ende des Ladekabels am Anschluss am Crysis 2 Bluetooth-Headset fr Playstation 3 anschlieen. 3) USB-Ende des Ladekabels am USB-Anschluss der Playstation 3 anschlieen. 4) Die LED auf dem Crysis 2 Bluetooth-Headset fr Playstation 3 leuchtet rot, wenn das Ladekabel ange schlossen ist und der Ladevorgang ausgefhrt wird. 5) Wenn die LED bei angeschlossenem Ladekabel blau leuchtet, ist das Crysis 2 Bluetooth-Headset fr Playstation 3 vollstndig aufgeladen. Ein- und Ausschalten des Crysis 2 Bluetooth-Headsets fr Playstation 3 1) Zum Einschalten des Crysis 2 Bluetooth-Headsets fr PlayStation 3 die Ein/Aus-Taste ungefhr 3 Sekunden lang gedrckt halten. Die LED am Crysis 2 Bluetooth-Headset fr PlayStation 3 leuchtet dreimal kurz rot auf. 2) Zum Ausschalten des Crysis 2 Bluetooth-Headsets fr PlayStation 3 die Ein/Aus-Taste ungefhr 3 Sekunden lang gedrckt halten. Die LED am Crysis 2 Bluetooth-Headset fr PlayStation 3 leuchtet zweimal kurz rot auf. Kopplung des Crysis 2 Bluetooth-Headsets mit der Playstation 3 1) Schalten Sie Ihre Playstation 3 AUS fr etwa 10 Sekunden und schalten ihn wieder ein. 2) Collegare il terminale mini USB del filo di corrente alla porta del connettore sulla cuffia Bluetooth crysis 2 per playstation 3. 2) Access Settings (Zugriffseinstellungen) auf dem Einstellungsmen der Playstation 3 auswhlen. 3) Register Bluetooth Device (Bluetooth-Gert registrieren) auswhlen. 4) Manage Bluetooth Device (Bluetooth-Gert verwalten) auswhlen. 5) Yes (Ja) auswhlen, um ein neues Gert zu registrieren, wenn bisher noch kein Bluetooth-Gert registriert wurde. 6) Start Scanning (berprfung starten) auswhlen. 7) Halten Sie die Power-Taste auf Bluetooth-Headset fr 6 Sekunden. 8) Bei entsprechender Aufforderung kann 0000 als Hauptschlssel eingegeben werden. 9) Fr eine schnelle Trennung, drcken Sie die Taste einmal, um es von der Playstation 3 trennen und wieder neu zu treten. Koppeln des Crysis 2 Bluetooth-Headset mit Bluetooth-kompatiblen Gert 1) Bei der Kopplung mit einem Bluetooth-Headset sind die Anleitungen zu befolgen, die dem Bluetooth-Handset beiliegen. Das Crysis 2 Bluetooth-Headset fr Playstation 3 muss eingeschaltet sein. Bei entspre chender Aufforderung kann 0000 als Hauptschlssel eingegeben werden. 2) LED-Anzeige: Standby unconnecting mit Handy: rote LED einmal alle 3 Sekunden zu blinken. Standby-Anschluss mit Mobiltelefon: rote LED blinkt zweimal alle 3 Sekunden. Talking: rote LED blinkt zweimal alle 5 Sekunden. Einstellen des Mikrofon-Eingangspegels an der Playstation 3 1) Der Mikrofon-Eingangspegel kann im Einstellungsmen der Playstation 3 fr Audiogerte angepasst werden. Einstellen der Lautstrke fr das Crysis 2 Bluetooth-Headset mit der Playstation 3 1) Die Lautstrke fr das Crysis 2 Bluetooth-Headset fr Playstation 3 kann mit der Lautstrketaste + erhht und mit der Lautstr ketaste verringert werden. 3) Collegare il terminale mini USB del filo di corrente ad una porta USB sulla playstation 3. 4) Quando collegato al filo di corrente e carica, il LED sulla cuffia 2 per playstation 3 lampegger di rosso. 5) Quando collegato al filo di corrente e completamente carico, il LED sulla cuffia Crysis 2 Bluetooth per playstation 3 lampegger in blu. Dare corrente alla cuffia Bluetooth Crysis 2 per Playstation 3 ON e OFF 3 1) Per dare corrente alla sulla cuffia Bluetooth crysis 2 per playstation 3, premere e tenere premuto il tasto di corrente per circa 3 secondi. Il LED sulla cuffia Bluetooth Crysis 2 per Playstation 3 lampegger 3 volte in rosso. Achtung: Wenn das Headset lngere Zeit mit hoher Lautstrke verwendet wird, knnen vor-
bergehende oder dauerhafte Gehrschden entstehen. Einstellen des Ohrbgels am Crysis 2 Bluetooth-Headset 2) Um das Mikrofon auf der Ebene Crysis2 Headset fr Playstation 3 * drcken und halten Sie die VOL + Taste fr 3 Sekunden. Um wieder das Mikrofon auf den Normalwert, halten Sie die VOL + Taste fr 3 Sekunden. Stummschalten des Crysis 2 Bluetooth-Headsets 1) Zum Stummschalten des Kopfhrerteils am Crysis 2 Bluetooth-Headset fr PlayStation 3 die Lauter-Taste (Vol +) 3 Sekunden lang gedrckt halten. Zur Rckkehr auf die normale Lautstrke die Lauter-Taste (Vol +) erneut 3 Sekunden lang gedrckt halten. ACHTUNG: nderungen oder Eingriffe an diesem Gert, die nicht ausdrcklich vom Hersteller zugelassen wurden, knnen dazu fhren, dass die Betriebsgenehmigung fr das Gert erlischt. Dieses Gert wurde auf Einhaltung der Grenzwerte fr Digitalgerte der Klasse B gem Teil 15 der FCC-
Bestimmungen geprft. Diese Grenzwerte gewhrleisten angemessenen Schutz gegen Straussendungen im Wohnbereich. Das Gert erzeugt elektromagnetische Strahlung und kann diese in die Umgebung abstrahlen. Wenn die Montage- und Betriebsanweisungen nicht genau eingehalten werden, kann dies zu Strungen im Betrieb anderer Hochfrequenzgerte fhren. Unabhngig davon kann nicht garantiert werden, dass im konkreten Einzelfall keine Strungen verursacht werden. Sollte das Gert Strungen im Radio- oder Fernsehempfang verursachen (was sich durch Aus- und Einschalten des Gerts feststellen lsst), knnen Sie versuchen, die Strung durch eine oder mehrere der folgenden Gegenmanahmen zu beheben:
Empfangsantenne neu ausrichten oder an einem anderen Ort aufstellen Abstand zwischen diesem Gert und dem Empfangsgert erhhen Gert und Empfangsgert an getrennte Steckdosen-Stromkreise anschlieen Vom Hndler oder einem qualifizierten Radio-/Fernsehtechniker beraten lassen FCC-ID: X5B-PL6385 Dieses Gert erfllt die FCC-Grenzwerte fr Strahlenbelastung in nicht kontrollierten Umgebungen und ist konform mit Teil 15 der FCC RF Rules sowie RSS-210 der IC Rules. Der Betrieb erfolgt unter den folgenden Magaben:
1. Dieses Gert darf keine schdliche Straussendung verursachen; und 2. Dieses Gert darf nicht durch andere Straussendungen beeinflusst werden, insbesondere solche, die zu unerwnschten Wirkungen im Betrieb fhren. 1840 East 27th Street Vernon, CA 90058 USA CBX II - 382-390 Midsummer Blvd., Milton Keynes, Buckinghamshire MK9 2RG UK Antworten auf technische Fragen:
www.pdp.com oder per Telefon: 1-800-331-3844 (nur in den USA) 2011 Performance Designed Products LLC. Alle Rechte vorbehalten. PDP ist eine Marke von Performance Designed Products LLC. Die Wortmarke Bluetooth und die dazugehrigen Logos sind eingetragene Marken von Bluetooth SIG, Inc. und werden von PDP unter Lizenz verwendet. Alle anderen Markennamen sind Marken oder eingetragene Marken der jeweiligen Rechteinhaber. PlayStation 3 ist eine eingetragene Marke von Sony Computer Entertainment, Inc. Dieses Produkt wird bzw. wurde nicht von Sony entworfen, hergestellt, angeboten oder untersttzt. Dieses Produkt wird unter Lizenz der Crytek GmbH hergestellt. Beim Computerspiel Crysis 2 handelt es sich um geistiges Eigentum der Crytek GmbH 2011. Crytek , Crysis und bestimmte Figuren aus Crysis 2 sind eingetragene Marken, Marken oder Geschmacksmuster der Crytek GmbH in Deutschland, den USA und anderen Lndern. Grazie per aver acquistato la Cuffia Bluetooth CRYSIS 2 Contenuto 1 cuffia Bluetooth Crysis 2 per Playstation 3 1 filo corrente Caricare la batteria 1) Aprire la linguetta che copre la porta del connettore della cuffia Bluetooth crysis 2 per playstation 3. 2) Per togliere corrente alla cuffia Bluetooth crysis 2 per playstation 3, premere e tenere premuto il tasto di corrente per circa 3 secondi. Il LED sulla cuffia Bluetooth Crysis 2 per Playstation 3 lampegger in rosso 2 volte. Mettere in collegamento la cuffia Bluetooth Crysis 2 con la Playstation 3 1) La potenza di alimentazione tua Playstation 3 OFF per circa 10 secondi e poi di nuovo su ON. 2) Selezionare le impostazioni di accesso sul menu impostazioni della Playstation 3 3) Selezionare . 4) Selezionare Manage Bluetooth Device. 5) Selezionare Yes per registrare un nuovo dispositivo, se la prima volta che si registra un dispositivo Bluetooth. 6) Selezionare Start Scanning 7) Tenere premuto il pulsante di alimentazione auricolare Bluetooth per 6 secondi. 8) Alla richiesta di una parola chiave inserire 0000. 9) Per la disconnessione rapida, premere il pulsante di accensione una volta per scollegarlo dalla Playstation 3 , e di nuovo per riconnettersi. Associazione di Crysis 2 auricolare Bluetooth con dispositivo Bluetooth compatibile 1) Seguire le istruzioni per il dispositivo Bluetooth riguardante il collegamento con una cuffia Bluetooth. Verificare che la cuffia Crysis 2 per Playstation 3 sia accesa. Alla richiesta di una parola chiave inserire 0000. 2) LED di segnalazione: Standby unconnecting con cellulare: led rosso lampeggia una volta ogni 3 secondi. Standby connessione con cellulare: led rosso lampeggia due volte ogni 3 secondi. Talking: LED rosso lampeggia due volte ogni 5 secondi. Regolare i livelli di ingresso del microfono sulla Playstation 3 1) Per regolare i livelli di ingresso del microfono sulla Playstation 3, andare al menu delle impostazioni Audio sulla Playstation 3. Regolare il livello del volume sulla cuffia bluetooth Crysis 2 con la Playstation 3 1) Per regolare i livelli di volume sulla cuffia Bluetooth crysis 2 per playstation 3, usare il tasto vol + per aumentare il livello del suono, e vol- per diminuire il livello del suono. Attenzione: Lesposizione prolungata ad alti volumi quando si usa un auricolare pu causare perdita di udito temporaneo o permanente. Uso del tasto Mute sulla Cuffia Bluetooth CRYSIS 2 1) Per disattivare il volume del microfono sul Crysis2 auricolare per Playstation 3 *, premere e tenere premuto il tasto VOL + per 3 secondi. Per riportare il livello del microfono al normale, tenere premuto il tasto VOL + per 3 secondi. Regolare leraloop sulla cuffia bluetooth Crysis 2 1) Se preferite la cuffia Bluetooth Crysis 2 per Playstation 3 allorecchio sinistro, rimuovete e girate learloop di 180 gradi. Spostare indietro learloop sulla cuffia Bluetooth Crysis 2 per Playstation 3 e girarlo in posizione. ATTENZIONE: I cambiamenti o le modifiche a questa attrezzatura non espressamente approvati dal fabbri-
cante possono rendere nulla lautorizzazione degli utenti allutilizzo dellattrezzatura. Questa attrezzatura stata testata e trovata conforme ai limiti della classe B per dispositivi digitali, in base alla sezione 15 delle norme FCC. Tali limiti sono progettati per fornire ragionevole protezione contro le interferenze dannose nelle installazioni residenziali. Questa attrezzatura genera, usa e pu irradiare energia di radio frequenze e, se non installata e usata in conformit con le istruzioni, pu causare dannose interferenze radio alle comunicazioni. Tuttavia non vi alcuna garanzia che non si verifichino interferenze in una particolare installazione. Se questa attrezzatura non causa interferenze dannose a radio o televisione, che siano accertate essere provocate dallo spegnimento e accensione dellattrezzatura, si invita lutente a correggere linterferenza prendendo una o pi delle seguenti misure.
-Riorientare o riposizionare lantenna ricevente.
-Aumentare la separazione tra lattrezzatura e il ricevitore.
-Collegare lattrezzatura ad una presa su un circuito diverso da quello a cui collegato il ricevitore. Rivolgersi al concessionario e ad un tecnico radio/TV. FCC-ID: X5B-PL6385 Questo dispositivo conforme ai limiti di esposizione alle radiazioni di FCC indicate per un ambiente non controllato e sono anche conformi con la sezione 15 delle norme FCC RF e RSS-210 delle norme IC. Il funzionamento soggetto alle seguenti due condizioni:
(1) questo dispositivo non pu causare interferenze dannose, e
(2) questo dispositivo deve accettare qualsiasi interferenza ricevuta, incluse le interferenze che possono provocare funzionamento non voluto. 1840 East 27th Street Vernon, CA 90058 USA CBX II - 382-390 Midsummer Blvd., Milton Keynes, Buckinghamshire MK9 2RG UK Per domande tecniche visitare www.pdp.com o chiamare: 1-800-331-3844 (solo USA) 2011 Performance Designed Products LLC. Tutti i diritti riservati. PDP un marchio registrato di Performance Designed Products LLC. Il marchio e il logo Bluetooth word sono marchi registrati di propriet di Bluetooth SIG, Inc. e sono usati su licenza di PDP. Tutti gli altri marchi e nomi commerciali sono di propriet dei rispettivi proprietari. Playstation 3 un marchio registrato, di Sony Computer Entertainment, IncQuesto prodotto non progettato, fabbricato, sponsorizzato o approvato da Sony. Questo prodotto prodotto su licenza di Crytek GmbH. Il gioco per computer Crysis 2 propriet intellettuale di Cryteck Gmbh 2011. Crytek ,Crysis e certe caratteristiche di Crysis 2 sono marchi registrato o marchi commerciali o brevetti progettatti di Crytek Gmbh in Germania, USA e altre nazioni. Obrigado por adquirir o auricular Bluetooth Crysis 2 para a Playstation 3!
Contedo 1 auricular Bluetooth Crysis 2 para a Playstation 3 1 cabo de alimentao Carregar a bateria 1) Abra a aba que cobre a porta do conector no auricular Bluetooth Crysis 2 para a Playstation 3. 2) Para desligar o auricular Bluetooth Crysis 2 para a Playstation 3, mantenha premido o boto de alimen tao durante cerca de 3 segundos. O LED no auricular Bluetooth Crysis 2 para a Playstation 3 ir apre sentar uma cor vermelha intermitente 2 vezes. Emparelhar o auricular Bluetooth Crysis 2 com a Playstation 3 1) Poder o seu Playstation 3 OFF por aproximadamente 10 segundos e ento ligue-o novamente. 2) Seleccione Definies de Acessrios no menu Definies da Playstation 3. 3) Seleccione Registar Dispositivo Bluetooth. 4) Seleccione Gerir Dispositivo Bluetooth. 5) Seleccione Sim para registar um novo dispositivo se for a primeira vez que regista um dispositivo Bluetooth. 6) Seleccione Iniciar Procura. 7) Mantenha o boto Power no fone de ouvido Bluetooth para 6 segundos. 8) Quando for solicitada uma palavra-passe, introduza 0000. 9) Para desconexo rpida, pressione o boto Power uma vez para desconect-lo da Playstation 3, e novamente para re-conectar. Emparelhar o Crysis 2 Bluetooth Headset Bluetooth com dispositivos compatveis 1) Siga as instrues do dispositivo porttil Bluetooth relativas ao emparelhamento com um auricular Bluetooth. Verifique se o auricular Bluetooth Crysis 2 para a Playstation 3 est ligado. Quando for solicitada uma palavra-passe, introduza 0000. 2) Indicao de LED: Espera unconnecting com telemvel: LED vermelho piscar uma vez a cada 3 segundos. espera de ligao com o telemvel: LED vermelho piscar duas vezes a cada 3 segundos. Falando: LED vermelho piscar duas vezes a cada 5 segundos. Ajustar os nveis de entrada do microfone na Playstation 3 1) Para ajustar os nveis de entrada do microfone na Playstation 3, aceda ao menu Definies do Dispositivo de udio na Playstation 3. Ajustar o nvel de volume do auricular Bluetooth Crysis 2 para a Playstation 3 1) Para ajustar o nvel de volume do auricular Bluetooth Crysis 2 para a Playstation 3, utilize o boto vol + para aumentar o nvel sonoro e o boto vol para diminuir o nvel sonoro. 2) Ligue a extremidade mini USB do cabo de ligao porta do conector no auricular Bluetooth Crysis 2 para a Playstation 3. Cuidado: A exposio prolongada a volumes elevados durante a utilizao de auscultadores poder resultar em surdez temporria ou permanente. 3) Ligue a extremidade USB do cabo de alimentao a uma porta USB da Playstation 3. 4) Quando estiver ligado ao cabo de alimentao e a carregar, o LED no auricular Bluetooth Crysis 2 para a Playstation 3 ir acender uma luz vermelha permanente. 5) Quando estiver ligado ao cabo de alimentao e totalmente carregado, o LED no auricular Bluetooth Crysis 2 para a Playstation 3 ir acender uma luz azul permanente. Ligar e desligar o auricular Bluetooth Crysis 2 para a Playstation 3 1) Para ligar o auricular Bluetooth Crysis 2 para a Playstation 3, mantenha premido o boto de alimentao durante cerca de 3 segundos. O LED no auricular Bluetooth Crysis 2 para a Playstation 3 ir apresentar uma cor vermelha intermitente 3 vezes. Utilizar o boto Mute no auricular Bluetooth Crysis 2 1) Para silenciar o volume do microfone no headset Crysis2 para Playstation 3 *, pressione e segure o boto vol + por 3 segundos. Para retornar o nvel do microfone imprensa, normal e segure o boto vol + por 3 segundos. Ajustar o suporte auricular no auricular Bluetooth Crysis 2 1) Se preferir utilizar o auricular Bluetooth Crysis 2 para a Playstation 3 no ouvido esquerdo, retire cuidadosamente o suporte auricular e rode-o em 180 graus. Encaixe cuidadosamente o suporte auricular no auricular Bluetooth Crysis 2 para a Playstation 3 e rode-o para a respectiva posio. ATENO: Alteraes ou modificaes efectuadas a este equipamento e que no tenham sido expres-
samente aprovadas pelo fabricante podem impedir que os utilizadores utilizem o equipamento. Este equipamento foi testado e demonstrou estar em conformidade com os limites de um dispositivo digital Classe B, de acordo com a parte 15 das Regras da FCC. Estes limites destinam-se a fornecer proteco razovel contra interferncias nocivas numa instalao residencial. Este equipamento gera, utiliza e pode irradiar energia de radiofrequncias e, se no for instalado e utilizado de acordo com as instrues, pode provocar interferncias nocivas nas comunicaes de rdio. Contudo, no existe garantia que no ocorram interferncias numa instalao em particular. Se o equipamento provocar interferncias nocivas na recepo de rdio ou televiso, situao que pode ser determinada desligando e ligando o equipamento, o utilizador deve tentar corrigir a interferncia atravs de uma ou mais das seguintes medidas:
Reorientar ou alterar a localizao da antena receptora. Aumentar a distncia entre o equipamento e o receptor. Ligar o equipamento a uma tomada ou a um circuito diferente daquele ao qual o receptor est ligado. Consultar o revendedor ou um tcnico de rdio/televiso experiente para obter ajuda. ID da FCC: X5B-PL6385 Este dispositivo cumpre com os limites de exposio de radiao da FCC estabelecidos para um ambiente no controlado e tambm cumpre com a Parte 15 das Regras de RF da FCC e RSS-210 das Regras IC. O funcionamento est sujeito s seguintes duas condies:
(1) este dispositivo no pode provocar interferncias nocivas, e
(2) este dispositivo deve aceitar quaisquer interferncias recebidas, incluindo interferncias que possa provocar um funcionamento indesejado. 1840 East 27th Street Vernon, CA 90058 USA CBX II - 382-390 Midsummer Blvd., Milton Keynes, Buckinghamshire MK9 2RG UK www.pdp.com ou telefone: 1-800-331-3844 (APENAS NOS E.U.A.) Para questes tcnicas, visite 2011 Performance Designed Products LLC. Todos os direitos reservados. PDP uma marca comercial da Performance Designed Products LLC. Os logtipos e a marca com a palavra Bluetooth so marcas comerciais registadas detidas pela Bluetooth SIG, Inc. e so utilizadas sob licenciamento por parte da PDP. Todos os restantes nomes de marcas so marcas comerciais ou marcas comerciais registadas dos seus respectivos proprietrios. PlayStation 3 uma marca comercial registada da Sony Computer Entertainment, Inc. Este produto no foi concebido, fabricado, patrocinado nem apoiado pela Sony. Este produto foi fabricado sob licenciamento por parte da Crytek GmbH. O jogo de computador Crysis 2 propriedade intelectual da Crytek GmbH 2011. Crytek , Crysis e alguns personagens de Crysis 2 so marcas comerciais registadas, marcas comerciais ou patentes de design da Crytek GmbH na Alemanha, E.U.A. e noutros pases. Tak fordi du kbte Crysis 2 Bluetooth Headset til PlayStation 3 Indhold 1 Crysis 2 Bluetooth Headset til Playstation 3 1 el-ledning Batteriopladning 1) ben klappen der dkker over stikforbindelsesporten p Crysis 2 Bluetooth Headset til Playstation 3. 2) Tilslut mini USB enden af el-ledningen til stikforbindelsesporten p Crysis 2 Bluetooth Headset for Playstation 3. 3) Tilslut USB enden af el-ledningen til en USB port p Playstation 3. 4) Nr den er tilsluttet til el-ledningen og oplader, vil LED-displayet p Crysis 2 Bluetooth Headset til Playstation 3 lyse vedvarende rdt. 5) Nr den er tilsluttet til el-ledningen og totalt opladet, vil LED-displayet p Crysis 2 Bluetooth Headset til Playstation 3 lyse vedvarende blt. Strmtilslutning p Crysis 2 Bluetooth Headset til Playstation 3 TND og SLUK 1) For at TNDE for Crysis 2 Bluetooth Headset til Playstation 3, tryk og hold tnd knappen nede i ca. 3 sek. LED-displayet p Crysis 2 Bluetooth Headset til Playstation 3, blinker rdt tre gange. 2) For at SLUKKE for Crysis 2 Bluetooth Headset til Playstation 3, tryk og hold tnd knappen nede i ca. 3 sek. LED- displayet p Crysis 2 Bluetooth Headset til Playstation 3, blinker rdt to gange. Parring af Crysis 2 Bluetooth Headset med Playstation 3 1) Strm din Playstation 3 OFF i cirka 10 sekunder og derefter tnde den igen. 2) Vlg Adgangsindstillinger p Playstation 3 indstillingsmenuen. 3) Vlg Registrer Bluetooth apparat 4) Vlg administrer Bluetooth apparat 5) Vlg Ja for at tilmelde et nyt apparat hvis dette er frste gang du registrerer et Bluetooth apparat. 6) Vlg Start scanning. 7) Hold Strmafbryderknappen p Bluetooth headset til 6 sekunder. 8) Nr du bliver opfordret til at indtaste adgangsngle, s indtast 0000. 9) Til hurtig frakobling, skal du trykke p tnd / sluk-knappen n gang for at afbryde det fra Playstation 3 , og igen for at oprette forbindelse. Parring af Crysis 2 Bluetooth Headset med Bluetooth kompatibel enhed 1) Flg instruktionerne for Bluetooth brbart apparat vedrrende parring med et Bluetooth Headset. Kontroller at Crysis 2 Bluetooth Headsettet til Playstation 3 er TNDT. Nr du bliver opfordret til at indtaste adgangsngle, s indtast 0000. 2) LED indikation: Standby unconnecting med mobiltelefon: rd lysdiode vil blinke n gang hvert 3 sekund. Standby forbinder med mobiltelefon: rd LED blinker to gange hvert 3 sekund. Talking: rd lysdiode blinker to gange hvert 5 sekund. Justering af mikrofon indgangsniveauer p Playstation 3 1) For at justere dine mikrofon indgangsniveauer p Playstation 3, bedes du g til Lydenheds indstillings menuen p din Playstation 3. Justering af lydstyrkeniveauet p Crysis 2 Bluetooth Headset med Playstation 3 1) For at justere lydstyrkeniveauet p Crysis 2 Bluetooth Headset til Playstation 3, bruges volume + knappen til at skrue op for lydstyrken og volume - knappen til at skrue ned for lydstyrken. Advarsel: Lngere tids udsttelse for hj lydstyrke ved brug af et headset kan medfre midlertidigt eller permanent hretab. Justering af resneglen p Crysis 2 Bluetooth Headset 1) For at sl mikrofonen niveau p Crysis2 headset til Playstation 3 *, tryk og hold VOL + knappen i 3 sekunder. For at vende tilbage mikrofonen niveau til normal, skal du trykke p og holde vol + knappen i 3 sekunder. Brug af knappen Stump Crysis 2 Bluetooth Headset 1) For at sl lyden fra p Crysis 2 Bluetooth Headset til Playstation 3, tryk og hold volumeknappen nede i ca. 3 sek. For at sl lyden til igen trykkes og holdes volumenknappen nede i 3 sek. ADVARSEL: ndringer eller modifikationer af dette udstyr der ikke er udtrykkeligt godkendt af produ-
centen kunne ugyldiggre brugerens tilladelse til at betjene udstyret. Dette udstyr er blevet afprvet, og det lever op til grnserne for et Klasse B digitalt apparat i henhold til afsnit 15 i FCC-bestemmelserne. Disse grnser skal give rimelig beskyttelse imod skadelig interferens i installationer i boligomrder. Dette udstyrt frembringer, anvender og kan udstrle radiofrekvensenergi, og hvis det ikke installeres og anvendes i overensstemmelse med anvisningerne, kan det forrsage skadelig interferens p radiokommunikation. Der gives imidlertid ingen garanti for at der ikke vil forekomme interferens i en bestemt installering. Hvis dette udstyr forrsager forstyrrende interferens p radio eller TV modtagelse, hvilket kan kontrolleres ved at tnde og slukke for udstyret, opfordres brugeren til at forsge at fejlrette interferensen ved hjlp af et eller flere af flg. tiltag:
Drej eller flyt modtagerantennen. g afstanden mellem udstyret og modtageren. Tilslut udstyret til en stikkontakt i et andet kredslb end den som modtageren er tilsluttet til. Kontakt forhandleren eller en autoriseret radio/TV tekniker for assistance. FCC ID: X5B-PL6385 Dette udstyr overholder FCC radiationsudsttelsegrnserne der er fastsat for et ukontrolleret milj og det er i overensstemmelse med afsnit 15 i FCC-bestemmelserne og RSS-210 i IC-bestemmelserne. Betjening er underlagt flgende to betingelser:
(1) dette udstyr m ikke forrsage skadelig interferens og
(2) dette udstyr skal acceptere al modtagen interferens indbefattet interferens der kan bevirke uhen-
sigtsmssig betjening. 1840 East 27th Street Vernon, CA 90058 USA CBX II - 382-390 Midsummer Blvd., Milton Keynes, Buckinghamshire MK9 2RG UK Hvis du har tekniske sprgsml, skal du g ind p:
www.pdp.com eller ringe til: 1-800-331-3844 (KUN USA) 2011 Performance Designed Products LLC. Alle rettigheder forbeholdes. PDP er et varemrke tilhrende Performance Designed Products LLC. Bluetooth varemrket og logoer er registrerede varemrker tilhrende Bluetooth SIG, Inc. og anvendes under licens af PDP. Alle vrige varemrker er varemrker eller registrerede varemrker tilhrende de repsketive ejere. Playstation 3 er et registreret varemrke tilhrende Sony Computer Entertainment, Inc. Dette produkt er ikke designet, fremstillet, sponseret eller anerkendt af Sony. Dette produkt er fremstillet p licens fra Crytek GmbH. Computerspillet Crysis 2 er intellektuel ejendom tilhrende Crytek GmbH 2011. Crytek, Crysis og visse figurer tilhrende Crysis 2 er registrerede varemrker eller varemrker eller design patenter tilhrende Crytek GmbH i Tyskland, USA samt andre lande.
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2011-01-25 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2011-01-25
|
||||
1 | Applicant's complete, legal business name |
Performance Designed Products, LLC
|
||||
1 | FCC Registration Number (FRN) |
0019508654
|
||||
1 | Physical Address |
14144 Ventura Blvd
|
||||
1 |
Oaks, California 91423
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
c******@telefication.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
X5B
|
||||
1 | Equipment Product Code |
PL6385
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
T****** R******
|
||||
1 | Title |
Chief Technical Officer
|
||||
1 | Telephone Number |
1-323********
|
||||
1 | Fax Number |
1-323********
|
||||
1 |
T******@pdp.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
Neutron Engineering, Inc.
|
||||
1 | Name |
S****** L******
|
||||
1 | Physical Address |
No.3,Jinshagang 1st Rd, ShiXia,Dalang
|
||||
1 |
Dongguan City, 523972
|
|||||
1 |
China
|
|||||
1 | Telephone Number |
+86-7******** Extension:
|
||||
1 | Fax Number |
+86-7********
|
||||
1 |
s******@btl.org.cn
|
|||||
app s | Non Technical Contact | |||||
1 | Firm Name |
Neutron Engineering, Inc.
|
||||
1 | Name |
C******** W********
|
||||
1 | Physical Address |
No.3,Jinshagang 1st Rd, ShiXia,Dalang
|
||||
1 |
Dongguan City, 523972
|
|||||
1 |
China
|
|||||
1 | Telephone Number |
+86-7******** Extension:
|
||||
1 | Fax Number |
+86-7********
|
||||
1 |
c******@btl.org.cn
|
|||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | CRYSIS2 Bluetooth Headset | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Power output listed is conducted. This is a portable device. End-users must be provided with operating conditions for satisfying RF exposure compliance. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
BTL Inc.
|
||||
1 | Name |
D******** D********
|
||||
1 | Telephone Number |
00867******** Extension:
|
||||
1 | Fax Number |
0086 ********
|
||||
1 |
d******@btl.org.cn
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0007000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC